How do we clear or delete the temporary folders

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Re: Lexar's "Secure II Plus" 2GB JumpDrive on Windows 98se computer Hi Franc, Thank you for your suggestions. I found "USBVIEW.EXE" on my Windows98SE CD and put it in my wife's WinXP computer. With "Secure II Plus" plugged in, I launched USBVIEW and I was able to see the VID (OX05DC) and PID (OXA702). I added that information to "JDUSBMS.INF" file, but it was unable to install a driver on my Windows 98se computer when I plugged in "Secure II Plus". I will seek Maximus Decim's NUSB and see if I have better luck with that. Brad On Sat, 22 Mar 2008 08:53:26 +1100, in microsoft.public.win98.gen_discussion you wrote: > >To answer your question, there is a utility called Usbview on your >Win98 CD. Otherwise search the Net for UVCView which is a later >utility that does the same thing. > >However, to make life easier for you, you may be better off with >Maximus Decim's NUSB native USB driver set. That should handle all >your USB storage devices, and it also provides USB 2.0 support. > > >>Hi, >> >> After using Lexar's "FireFly" (1GB) on my Windows 98se computers by >>downloading the driver from the link below, I took a chance on a Lexar >>"Secure II Plus" (2GB) that was on sale ($14.95) >> >> http://www.lexar.com/drivers/files/jdusb2.zip >> >> Well, I was unable to install a driver for "Secure II Plus" JumpDrive in >>my Windows 98se. On my wife's WinXP computer, no problem of course. >> >> I assume that if I knew the VID & PID numbers, I could add that to >>the .INF file (from jdusb2.zip) and perhaps, that would work? >> >> On my wife's WinXP computer, I looked at properties via Device Manager >>for "Secure II Plus", (which was plugged in), but I didn't see anything that >>looked like VID and/or PID. >> >> Do you know how I can see those numbers? > >To answer your question, there is a utility called Usbview on your >Win98 CD. Otherwise search the Net for UVCView which is a later >utility that does the same thing. > >However, to make life easier for you, you may be better off with >Maximus Decim's NUSB native USB driver set. That should handle all >your USB storage devices, and it also provides USB 2.0 support. > >> Thanks in advance, Brad >> >> Before you type your password, credit card number, etc., >> be sure there is no active keystroke logger (spyware) in your PC. Tag: How do we clear or delete the temporary folders Tag: 879450
  - 2
    - Fresh install rebooting issue I have an 80GB HDD on which I treid to install Win98. I copied the files to the HDD and ran the setup from that directory. After all of the files loaded, the PC rebooted and said it was running windows for the first time. It then rebooted in the middle of the splash screen. Since then it will not get past the splash screen without rebooting. Any ideas on why this would be happening on a clean install? Tag: How do we clear or delete the temporary folders Tag: 879445
  - 3
    - Pavilion 8612 This old horse decided to go on strike today as when I boot up it shows "" C:\Windows> "" and thats it. How can I get it going again?. I believe it may have to the fact that I use the broadband now. Look forward for your response.Thanks a lot Tag: How do we clear or delete the temporary folders Tag: 879427
  - 4
    - Lexar's "Secure II Plus" 2GB JumpDrive on Windows 98se computer Hi, After using Lexar's "FireFly" (1GB) on my Windows 98se computers by downloading the driver from the link below, I took a chance on a Lexar "Secure II Plus" (2GB) that was on sale ($14.95) http://www.lexar.com/drivers/files/jdusb2.zip Well, I was unable to install a driver for "Secure II Plus" JumpDrive in my Windows 98se. On my wife's WinXP computer, no problem of course. I assume that if I knew the VID & PID numbers, I could add that to the .INF file (from jdusb2.zip) and perhaps, that would work? On my wife's WinXP computer, I looked at properties via Device Manager for "Secure II Plus", (which was plugged in), but I didn't see anything that looked like VID and/or PID. Do you know how I can see those numbers? Thanks in advance, Brad Before you type your password, credit card number, etc., be sure there is no active keystroke logger (spyware) in your PC. Tag: How do we clear or delete the temporary folders Tag: 879392
  - 5
    - USB Drives You are limited to 4 IDE drives. Are there any limitations in the number of USB drives? Tag: How do we clear or delete the temporary folders Tag: 879364
  - 6
    - destorying the hard drive My daughter has an old Gateway computer running Windows 98. She says no one wants it because it is slow and obsolete and she wants to turn it into the local recycling place. She is worried about (personal) data on the hard drive. I wonder if reformatting the HD will destroy all the data? My old W95 computer, I took the HD out and smashed it with a sledge hammer, but she doesn't want to do that. She took it to a computer store, and they offered to "hose" the HD and dispose of the computer for $50.00. Any suggestions? Jim Tag: How do we clear or delete the temporary folders Tag: 879329
  - 7
    - US CERT Advisory - MIT KERBEROS -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 National Cyber Alert System Technical Cyber Security Alert TA08-079B MIT Kerberos Updates for Multiple Vulnerabilities Original release date: March 19, 2008 Last revised: -- Source: US-CERT Systems Affected * MIT Kerberos Overview The MIT Kerberos implementation contains several vulnerabilities. Exploitation of these vulnerabilities could allow a remote, unauthenticated attacker to execute arbitrary code, compromise the key database or cause a denial of service on a vulnerable system. I. Description The MIT Kerberos Development Team has released MIT krb5 Security Advisory 2008-002 to address vulnerabilities in multiple versions of MIT Kerberos. More information about these vulnerabilities can be found in VU#895609 and VU#374121. II. Impact Potential consequences include arbitrary code execution, key database compromise, and denial of service. III. Solution Install updates from your vendor Check with your vendors for patches or updates. For information about a vendor, please see the systems affected section in vulnerability notes VU#895609 and VU#374121 or contact your vendor directly. Administrators who compile MIT Kerberos from source should refer to MIT Security Advisory 2008-002 for more information. IV. References * US-CERT Vulnerability Note VU#895609 - <http://www.kb.cert.org/vuls/id/895609> * US-CERT Vulnerability Note VU#374121 - <http://www.kb.cert.org/vuls/id/374121> * MIT krb5 Security Advisory 2008-002 - <http://web.mit.edu/kerberos/advisories/MITKRB5-SA-2008-002.txt2> _________________________________________________________________ The most recent version of this document can be found at: <http://www.us-cert.gov/cas/techalerts/TA08-079B.html> _________________________________________________________________ Feedback can be directed to US-CERT Technical Staff. Please send email to <cert@cert.org> with "TA08-079B Feedback VU#895609" in the subject. _________________________________________________________________ For instructions on subscribing to or unsubscribing from this mailing list, visit <http://www.us-cert.gov/cas/signup.html>. _________________________________________________________________ Produced 2008 by US-CERT, a government organization. Terms of use: <http://www.us-cert.gov/legal.html> ____________________________________________________________________ Revision History March 19, 2008: Initial release -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (GNU/Linux) iQEVAwUBR+E+pPRFkHkM87XOAQK1jwf/ZDEomMLCZvsmN7KVXa0Il5PqXlfRvG2Y jdWPUCi92qmgvm8LdqoNgAUxnUGYzCHLQzw8ebmnz37AMigDNsYIzFHStgnoJDVi iK6UGC6gHLnGJFuG+otEC9jZaVeIiUbKddB2+vzvmDWLnvIsyxzmHf6lJe0IrZlH ho/cCgpfRctgZHM5Ke+pPPqMjZZ7u0OUQnM7MIcSsZbKxw8x2CyUpaSiheMDhf8p 8JGyx+nkyvZoja6Ee4WCRq3xtVaUlp/sg8IZYY5nav2VuSh15rJXLJCWDBXUU+oV aAXPa2JEx5Cn3S0CFz8SIJ4NoLUp09usVMFyeNd57FMBKRjTAC/DBw== =4wkz -----END PGP SIGNATURE----- -- MEB http://peoplescounsel.orgfree.com -- _________ Tag: How do we clear or delete the temporary folders Tag: 879317
  - 8
    - Security programs, Scanners for Win98se??? Is it true that Adaware is no longer supporting Win98se? What security programs are people now using on their Win98se boxes? Thanks. Tag: How do we clear or delete the temporary folders Tag: 879304
  - 9
    - 98SE Runs in MSDOS Compatibility Mode I have just upgraded my system with a new motherboard (Biostar NF4 Ultra A9A) that has an NVIDIA nForce4 Ultra Chipset. Does anyone know how to get the 98SE operating system up and running with this motherboard or maybe a work around? I am able to boot the system but the Desktop looks like a Safe Mode display and the Hard Drive or CD drive is not listed in Device Manager only a Floppy Drive. I can access the FAT partition with no problem as it is listed in My Computer as C drive. The system runs in MSDOS Compatibility Mode. I tried to do a registry repair deleting the NOIDE value but there isnâ??t one listed. What could be causing the problem? Can anyone help me in rectifying the situation? Any help or response would be most appreciated? Tag: How do we clear or delete the temporary folders Tag: 879300
  - 10
    - New Free software and games download (A to Z) New Free software and games download (A to Z) If we are to have real peace, we must begin with the children. Free software and new games download.... Everthing is available here..... Just click...... http://bajagu.guys.googlepages.com/www.newinfoproducts.c-o.in Tag: How do we clear or delete the temporary folders Tag: 879288
  - 11
    - locked out after running utility to clear disk space I got a message that my hard drive was full and a popup asking if I wanted to run a utility to clear space. I ran the utility and immediately couldn't get into any MS programs. If I selected a program, e.g. Word, I got a message like unable to access word.inl (not sure about extension). Also, the icons for the MS programs looked like document rather than program icons. I restarted my computer and the system now wants me to reinstall Windows98. I have no idea where the disks are, and it seems like I may have just deleted one key module. Can anyone recommend a way to see if it is still on my computer (I assume I can start up in DOS, although the Windows 98 install wizard starts automatically) or download it ? Thanks Tag: How do we clear or delete the temporary folders Tag: 879278
  - 12
    - regarding w98 and processors What is the specified minimum processor speed and specified maximum processor speed under which W98 will function properly? Tag: How do we clear or delete the temporary folders Tag: 879271
  - 13
    - help = can't edit hosts file because it won't let me pick a program. I've just had something weird pop up. I tried to edit my hosts file, but instead of being asked what program I want to use to open it with, I got a dialog box telling me "This file does not have a program associated with it for performing this action. Create an association in My Computer by clicking View and then clicking Folder Options". Something in the registry is probably messed up, how do I fix it so that it goes back to giving me a list of programs so I can click on notepad? Tag: How do we clear or delete the temporary folders Tag: 879268
  - 14
    - scanreg I recently discovered that my daily scanreg was not occurring. When I opened in MSDOS mode and did a scanreg /restore I found that the five backups were several weeks old. I made a registry change by adding /autorun after scanreg.exe and moving the scanreg.exe file to C:\Windows and got it to work again but now I have two new problems: (1) Every time I re-boot, scanreg runs so that if I re-boot 5 or more times in one 24 hour period, I have 5 identical files. Previously scanreg only ran the first boot of each day. The also are all identified as not having been started where as in the past, the older ones were sometimes labeled as having "started". (2) Every time I boot, during the boot sequence, a black box MSDOS window appears showing that scanreg and scanregW have been initiated. This box NEVER appeared before I made the changes above. While scanreg is now working, I have somehow screwed up the sequence so that the above problems have occurred. My questions: Where should the scanreg.exe file reside. Is /autorun after the scanreg entry in the registry appropriate/necessary. It wasn't there before. How do I suppress the MSDOS scanreg box from displaying during boot How can I get back to a single scanreg action at initial daily boot and not every time I boot. Tag: How do we clear or delete the temporary folders Tag: 879252
  - 15
    - But the CPU is not new . . . After fitting a new power supply, this 2.8 GHz PC running Win98SE reports at every boot: "New CPU installed! Please enter Setup . . . " (Defaults are NBG since Win98 counts as a "legacy" OS so hyperthreading must be disabled.) The CPU is original (used since purchase June 2004 with ASUS P4P800S motherboard. We checked the CMOS battery (also original) when replacing the power supply and it tested OK. Why does it (seem to) fail to hold BIOS settings? (I never saw this "New CPU" message before, not even when the unit was actually new.) -- Don Phillipson Carlsbad Springs (Ottawa, Canada) Tag: How do we clear or delete the temporary folders Tag: 879240
  - 16
    - two types of Internet connection How to configure two types of Internet connection in one PC, connection via Broadband Cable modem and via DSL line? Access via Broadband Cable modem is default connection, already configured, and want add DSL connection and switch to DSL when cable internet is down. How make this better? S. Tag: How do we clear or delete the temporary folders Tag: 879239
  - 17
    - Microsoft and Yahoo met to discuss merger Senior executives from Microsoft Corp and Yahoo Inc met on Monday to discuss Microsoft's takeover bid for the company http://thefreereporter.net/newspr/1516202.htm Tag: How do we clear or delete the temporary folders Tag: 879238
  - 18
    - I have to operating systems and need help removing one Well what has happened was my computer was bought with windows xp professional edition...my friend had my computer for a while and he screwed my whole computer up by installing windows 98....So what I did was I tried to go back to the windows xp pro edition but it did not work so I got a windows xp home edition cd and installed it...now every time I start up my computer it gives me an option to pick an operating system...windows xp home and windows 98.....can some one please help me remove the windows 98 so I only have one operating system....... I already tried to format the drives but that doesnt work or im not doing it correctly...the windows 98 seems to be in the C:drive and the xp seems to be in the E:drive.......PLEASE HELP ME Tag: How do we clear or delete the temporary folders Tag: 879205
  - 19
    - windows 98 outlook express email Hi, this discussion group is great. My email , outlook express explorer 6 , i cannot delete none of the emails. I try to press the delete button and nothing happens. Its there , but nothing. My emails keep coming and i cannot delete one of them. I even tryed to delete all of them under tools but that is not highlited or i can not use. I am not sure what to do. I have reloaded outlook twice now , but still the same. I am fustrated . ha ha ha, thanks for your support :) Tag: How do we clear or delete the temporary folders Tag: 879202
  - 20
    - UPDATE: Lexar "FireFly" USB Flash Drive for Windows 98se Hi, Thanks to everyone who responded. The response I received from "Know1" solved my problem. I downloaded jdusb2.zip from the link he provided (below). http://www.lexar.com/drivers/files/jdusb2.zip Brad On Fri, 14 Mar 2008 14:35:17 GMT, Brad wrote: >Hi, > > I have been using a 1GB Lexar "Jump Drive" USB flash drive ("thumb drive") >for a couple years on my Windows 98se computer without any problems. > > Recently, I decided to buy another Lexar !GB, but nobody sells a >Windows 98 version anymore. I don't want a used one so I took a >chance on a Lexar "FireFly" 1GB (WinXP/Vista/Mac) and I hope that somehow, I >can get it to "work" on my Win98 computer. There are no drivers for "FireFly" >at Lexar's web site. I searched the web for about 1/2 hr, and I didn't find a >source. > > Do you know a technique, or a source where I can download the driver, >even if it's a Windows XP driver? > > Thanks in advance, Brad > > Before you type your password, credit card number, etc., > be sure there is no active keystroke logger (spyware) in your PC. Tag: How do we clear or delete the temporary folders Tag: 879187
  - 21
    - email 98 outlook express Where can i download the email browser for 98 outlook express, or i need a new email browser for my emails. I am using mozilla thunderbird and i hate it, ha ha. I just want my old outlook express back , the old one stop working and i switched now i want to go back, to outlook for my emails but i cannot find the download page, please help thanks soooo much Tag: How do we clear or delete the temporary folders Tag: 879182
  - 22
    - custom order of Desktop icons messed up, would restoring registry I had just changed my screen resolution on my older win98 computer before starting a movie to play it full screen without slowdowns when the computer promptly crashed by locking up on the BSOD. After hitting the reset button, when the computer booted up again, the screen resolution was far lower than I thought possible. It was at least as low as 320x240, if not lower. It looked like magnifier was in use, except that the whole screen was repesented in this reduced space. With some difficulity because the option I needed was off the screen, I was able to adjust the display settings to fix things, but this messed up the custom order of my desktop icons to a seemingly random order. I've spent a lot of time optimizing them. It has persisted after a reboot. Would restoring one of the automatic registry backups fix this? I haven't done anything that would make any significant changes to the registry in at least a month (aside from this problem), and figuring I turn the computer off every night, restoring the registry shouldn't hurt anything, or so I hope. Tag: How do we clear or delete the temporary folders Tag: 879173
  - 23
    - Windows protection error I have Windows 98 Second edition. I made no changes to my computer in the recent past. All of the sudden, when I boot up I get this message "Windows Protection Error." It suggests that I open in safe mode. I am able to do that. What do I have to do to get rid of this problem and start using my computer in the normal mode? Thanks. Tag: How do we clear or delete the temporary folders Tag: 879170
  - 24
    - Lexar "FireFly" USB Flash Drive for Windows 98se Hi, I have been using a 1GB Lexar "Jump Drive" USB flash drive ("thumb drive") for a couple years on my Windows 98se computer without any problems. Recently, I decided to buy another Lexar !GB, but nobody sells a Windows 98 version anymore. I don't want a used one so I took a chance on a Lexar "FireFly" 1GB (WinXP/Vista/Mac) and I hope that somehow, I can get it to "work" on my Win98 computer. There are no drivers for "FireFly" at Lexar's web site. I searched the web for about 1/2 hr, and I didn't find a source. Do you know a technique, or a source where I can download the driver, even if it's a Windows XP driver? Thanks in advance, Brad Before you type your password, credit card number, etc., be sure there is no active keystroke logger (spyware) in your PC. Tag: How do we clear or delete the temporary folders Tag: 879139
  - 25
    - Quirks in Scandisk, Chkdsk, Fixmbr, Fixboot I recently had to repair file system corruption for two XP users, one with a FAT32 partition, the other with NTFS. Unfortunately I have little experience with XP so I struggled quite a bit. Anyway I discovered that Microsoft's disc repair tools were flawed in several ways. Case #1 ------- The PC with the NTFS partition had an inaccessible registry file, c:\windows\system32\config\system. It couldn't be deleted, copied, or renamed, so the procedure in this MSKB article could not be applied: How to recover from a corrupted registry that prevents Windows XP from starting: http://support.microsoft.com/kb/307545 I attempted to run CHKDSK from the repair console of a bootable XP CD, but the file system was deemed to have unrecoverable errors. I then installed the drive into an external USB enclosure, attached it to a working XP system, and ran CHKDSK from within a CMD window. CHKDSK found many problems, including an MFT issue, all of which were fixed. Prior to running CHKDSK, I tried to repair the drive from within the GUI via Tools > Properties, but this also produced an "unrecoverable" message. Case #2 ------- The PC with the FAT32 partition could not boot. It produced a "missing NTLDR" error. This suggested that the MBR and boot sector were probably OK, and that the error was somewhere in the FATs or directory structure. I booted into the repair console of an XP CD and tried a DIR command. This produced a "could not be enumerated" error. DISKPART was able to see the full partition (38GB), so the partition table and MBR were apparently OK. CHKDSK deemed that the drive was "unrecoverable". In desperation I tried the FIXBOOT command and that's when things became extremely bizarre. A DIR command was now able to see the C: drive, but there were no files! The partition size was reported as 10MB (or was it 10GB?). I reconfirmed with DISKPART that the partition table was still intact, but in desperation I now tried FIXMBR. This command warned me that the MBR contained unknown or damaged code, so I went ahead and allowed it to refresh the code. It reported success but when I ran FIXMBR a second time, it still complained of unknown or damaged code. Now I'd had enough, so I installed the drive into an external USB enclosure and attached it to a working XP system. I used DEBUG from with a CMD window to view the drive's boot sector and was horrified to see a FAT12 signature. For some inexplicable reason, FIXBOOT had replaced a FAT32 HD boot sector with a FAT12 floppy boot sector! CHKDSK was unable to repair this problem, and My Computer showed the drive as having a capacity of 10MB (or 10GB?). I then used DEBUG to zero the contents of the boot sector, thinking that now CHKDSK would have a better chance to repair it, but CHKDSK now complained that it would not operate on a RAW volume. Attempting to repair the drive from within the GUI using Tools > Options produced no response. Now I was getting desperate. I took the USB drive to my Windows 98SE box and to my surprise Explorer was able to see the entire drive with all the original files apparently still intact! SCANDISK determined that the first copy of the FAT was corrupt, but it didn't tell me that the boot sector was missing. It just used the backup copy of the boot sector (logical sector 6) and behaved as if all was well. With some trepidation I allowed Scandisk to repair the FAT, and to fix the misreported file sizes for SYSTEM.LOG and SOFTWARE.LOG. However, Scandisk did not replace the damaged boot sector. I had to do this manually via DEBUG in a DOS box, by copying the contents of sector 6 to sector 0. After doing this, I was able to see the all the files in a working XP system (in the USB enclosure), and CHKDSK reported that all was fine. However, I was still unable to boot from the drive when I reinstalled it in the original XP box. So what was wrong? I looked closely at the boot sector again and found that it was a Win9x boot sector, ie there were references to IO.SYS, MSDOS.SYS and WINBOOT.SYS, but no reference to NTLDR. WTF! I decided to load XP onto a spare HD that had been FDISKed and FORMATted by Windows 98SE and sure enough XP replaced the boot sector with its own FAT32 code, but it did not touch the backup boot sector. So XP had created a file system that had an XP boot sector and a Win9X backup. So what to do now? I decided to make a hybrid boot sector by using the tail end of an XP FAT32 boot sector for the code, and the beginning of the Win9X boot sector for the data. After restoring this patched boot sector to sector 0, the drive booted in the original machine and all was well. BTW, boot sector templates can also be extracted from AUTOCHK.EXE. As a final check, I used MBRtool to make a copy of the MBR code. I then compared this with an MBR template that I found inside DISKPART.EXE. There was no difference. So why did FIXMBR complain about unknown or damaged code? - Franc Zabkar -- Please remove one 'i' from my address when replying by email. Tag: How do we clear or delete the temporary folders Tag: 879124
- Next
  - 1
    - 98SE/ME NVIDIA nForce4 Ultra Chipset Driver I am running a triple boot system, 98SE / ME / XP Pro. I have just upgraded with a new motherboard with an NVIDIA nForce4 Ultra Chipset. Does anyone know of a 98SE / ME driver for this chipset or maybe a work around in order to get these two FAT systems up and running? I am not looking to use any of the special features of this chipset like RAID or SATA, I just want these systems to operate the way they were originally designed with the new motherboard? I am able to boot the systems but the Desktop looks like a Safe Mode display and there are no Hard Drives or CD drives listed in Device Manager or My Computer, only a Floppy Drive. I can access the two FAT partitions with no problem as they are listed in My Computer as C & D drives. The systems run in MSDOS Compatibility Mode and I am unable to do a registry repair deleting the NOIDE value as there is none listed. Any help in solving the problem would be most appreciated. Tag: How do we clear or delete the temporary folders Tag: 879091
  - 2
    - WMI 1.5? Anybody installed this (Windows Management Instrumentation 1.5)? And without any problems? No problems or gotchas were mentioned on the MS download site that I could see. Anyways, I found an app that required it I don't know what the base version is on Windows98SE (assuming there is one, and that its even installed). Well, I did see a wmi.dll on this system, but the version number makes no sense (like 5.0). Tag: How do we clear or delete the temporary folders Tag: 879087
  - 3
    - BIOS upgrades - reflashing the BIOS Just spent an "interesting" (to put it mildly!) weekend on this project to enable a microprocessor upgrade. I wouldn't recommend it for the faint-hearted, suffice it to say, or you might end up with a paperweight. :-) You know, it wouldn't be quite so bad, except that in some cases, there is no reverse path available (i..e, it's a one way trip) - which seems unforgiveable, on their part! My question is: why do these BIOS manufacturers sometimes make it so damn difficult to upgrade/downgrade or go back to a previous version (especially when going from one manufacturer to one its subsidiaries, or vice versa (like Dell and Intel)? And not only that, but even block certain upgrades with certain chips, just out of self-centered arrogance on their part (and not due to real chip limitations)? Tag: How do we clear or delete the temporary folders Tag: 879082
  - 4
    - Security Update for Windows 98 (KB891711) I keep getting a pop up that this critical update is available. When I click on the install button, nothing happens. What is up with this? Tag: How do we clear or delete the temporary folders Tag: 879061
  - 5
    - Replica Chanel Boots Replica Chanel Boots http://www.shoesbootjeans.com/Boots_Chanel_1.html Email:wholesale-replica@hotmail.com key words: replica clothes, replica clothing, replica fashion, replica shoes, replica apparel, replica dress, replica watches, fake clothes, replica handbags, replica wallet, replica purse, replica phone, replica cell phone, replica jewellery, replica jewelry, replica cigarette, replica belts, replica hats, replica caps, fake clothing, fake shoes, fake watches, fake belts, fake handbags, fake wallet, imitation shoes, imitation clothes, imitation appreal, counterfeit shoes, counterfeit clothes, replica jeans, replica hoodies, replica shirts, replica designer jeans, replica ed hardy, replica shmack, replica levi's, replica aka stash house, replica antik denim, replica dsquared, replica evisu, replica g star raw, wholesale, name brand, replica lacoste, replica polo , replica Polo Ralph Lauren, replica D & G, replica Diesel, replica Burberry, replica Evisu, replica Bape, replica bathing ape, replica Levi's, replica Dolce&Gabbana, replica Red monkey, replica RMC, replica True Religion, replica Artful dodger, replica LRG, replica Rock & Republic, replica jeans, replica designer jeans, replica hoody, replica hoodies, replica t shirt, replica tee shirts, replica shirts, replica long sleeve shirts, replica short sleeve shirts, Bape hoody, BBC hoody, Nike shoes, Air Jordan shoes, Adidas, Prada, Puma, Timberland, Gucci shoes, New Balance, Hogan, Chanel, Reebok, Dsquared2, Dsquared, Versace, Converse, Bape, Dior, Buberry, Rolex, A.lanoe & sonoe, armani, Breguet, Breitling, Bvlgari, Cartier, Chanel, Franck Muller, Gucci, IWC, Jaeger lecoultre, longines, Movado, omega, praerai, Patek Philippe, Piaget, Porsche design, TAG, Tissot, Tudor, Vacheron Constantin, Zenitih, Marlboro, Camel, cigarette, ed hardy, christan audigier, kid robot, bbc, air jordan, jordans, retro jordan shoes, hogan, chanel, converse, dior, burberry, UGG, visvim, coach, chole, fendi, miu miu, Givenchy, hermes, balenciaga, Marc Jacobs, Jimmy choo, Dior, Prada, Versace, Thomaswylde, Mulberry, YSL handbags, Loewe, Juicy, Anya hindmarch, adicolour, Adidas Y 3, Von Dutch, NY, Tiffany, 925, silver, jewelry, Nokia, Zippo, Apple iphone, ipod, replica boots Tag: How do we clear or delete the temporary folders Tag: 879054
  - 6
    - For PCR, trying to get rid of DEFAULT_MONITOR [HKEY_LOCAL_MACHINE\Enum\MONITOR] [HKEY_LOCAL_MACHINE\Enum\MONITOR\VSCE41B] [HKEY_LOCAL_MACHINE\Enum\MONITOR\VSCE41B\PCI_VEN_1002&DEV_5961&SUBSYS_280117 EE&REV_01_000800] "Capabilities"=hex:14,00,00,00 "InitMonitorPowerState"="0f" "EDID"=hex:00,ff,ff,ff,ff,ff,ff,00,5a,63,1b,e4,01,01,01,01,14,10,01,03,0e,26 ,\ 1f,78,2e,11,45,a4,5a,4a,a0,24,14,50,54,bf,ef,80,81,80,81,40,71,4f,01,01,01,\ 01,01,01,01,01,01,01,30,2a,00,98,51,00,2a,40,30,70,13,00,78,36,11,00,00,1e,\ 00,00,00,ff,00,51,38,48,30,36,32,30,30,31,32,35,30,0a,00,00,00,fd,00,32,4b,\ 1e,52,0e,00,0a,20,20,20,20,20,20,00,00,00,fc,00,56,50,39,33,30,20,53,65,72,\ 69,65,73,0a,00,e5 "HardwareID"="MONITOR\\VSCE41B" "CompatibleIDs"="*PNP09FF" "Class"="Monitor" "SerialNum"="Q8H062001250" "DeviceDesc"="ViewSonic VP930 Series" "FriendlyName"="VP930 Series" "MaxResolution"="1280,1024" "MonitorRanges"="30-82,50-75,+,+" "DPMS"="1" "ClassGUID"="{4D36E96E-E325-11CE-BFC1-08002BE10318}" "Driver"="Monitor\\0000" "Mfg"="ViewSonic" "ConfigFlags"=hex:00,00,00,00 [HKEY_LOCAL_MACHINE\Enum\MONITOR\DEFAULT_MONITOR] [HKEY_LOCAL_MACHINE\Enum\MONITOR\DEFAULT_MONITOR\PCI_VEN_1002&DEV_5961&SUBSY S_280117EE&REV_01_000800_1] "Capabilities"=hex:14,00,00,00 "InitMonitorPowerState"="0f" "HardwareID"="MONITOR\\DEFAULT_MONITOR" "ClassGUID"="{4D36E96E-E325-11CE-BFC1-08002BE10318}" "Class"="Monitor" "Driver"="Monitor\\0001" "Mfg"="(Standard monitor types)" "DeviceDesc"="Default Monitor" "ConfigFlags"=hex:00,00,00,00 ************************************************************** [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor] "Link"="{4D36E96E-E325-11CE-BFC1-08002BE10318}" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0000] "ICMProfile"=hex:56,50,39,33,30,5f,53,65,72,69,65,73,2e,49,43,4d,00,00 "MaxResolution"="1280,1024" "DPMS"="1" "InfPath"="VIEWSO~1.INF" "InfSection"="VP930_Series.Install" "ProviderName"="ViewSonic" "DriverDate"=" 2-16-2008" "DriverDesc"="ViewSonic VP930 Series" "MatchingDeviceId"="Monitor\\VSCE41B" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0000\MOD ES] [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0000\MOD ES\1280,1024] "Mode1"="30-82,50-75,+,+" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0001] "InfPath"="MONITOR.INF" "InfSection"="Unknown.Install" "ProviderName"="Microsoft" "DriverDate"=" 4-23-1999" "DriverDesc"="Default Monitor" "MatchingDeviceId"="Monitor\\Default_Monitor" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0001\MOD ES] [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0001\MOD ES\640,480] @="" ******************************************************************** RADEON 9200 SERIES Display Registry Key: HKEY_LOCAL_MACHINE\enum\PCI\VEN_1002&DEV_5961&SUBSYS_280117EE&REV_01\000800 Alloc resources: Logical Configuration 0 IRQ: 11 Mask: xFFFF Forced resources: None Boot resources: None Filtered resources: Logical Configuration 0 IRQ: 11 Mask: xFFFF Basic resources: Logical Configuration 0 IRQ: 0 Mask: xFFFF HW Revision: 001 Driver: Display\0000 Driver Date: 2- 3-2006 Driver: vga.drv File Size: 52080 (0xCB70) File Date: 4/23/1999 10:22 AM Company Name: Microsoft Corporation File Version: 4.10.1998 Driver: atricdxx.enu File Size: 69632 (0x11000) File Date: 1/24/2006 10:09 PM Company Name: ATI Technologies Inc. File Version: 6.14.10.2045 (8.03.98.4.050725) Driver: atiicdxx.sys File Size: 5376 (0x1500) File Date: 11/6/2002 2:48 PM Company Name: ATI Technologies Inc. File Version: 6.13.10.1005 Driver: atiicdxx.vxd File Size: 7849 (0x1EA9) File Date: 4/14/2003 8:07 PM Company Name: ATI Technologies Inc. File Version: 4.12.1003 Driver: atiicdxx.dll File Size: 339968 (0x53000) File Date: 1/24/2006 10:09 PM Company Name: ATI Technologies Inc. File Version: 6.14.10.2087 (8.03.98.4.050725) Driver: atiiiexx.dll File Size: 294912 (0x48000) File Date: 1/24/2006 10:13 PM Company Name: ATI Technologies Inc. File Version: 6.14.10.4003 Driver: atiiisxx.exe File Size: 13568 (0x3500) File Date: 2/11/2002 9:09 PM Driver: TI2DRAG.DRV File Size: Driver Not Installed File Date: Driver Not Installed Driver: ati2edxx.dll File Size: 30720 (0x7800) File Date: 1/24/2006 9:42 PM Company Name: ATI Technologies, Inc. File Version: 6, 14, 10, 2494 Driver: Oemdspif.dll File Size: 102400 (0x19000) File Date: 1/24/2006 9:42 PM Company Name: ATI Technologies, Inc. File Version: 6.14.0010 Driver: atipdlxx.dll File Size: 118784 (0x1D000) File Date: 1/24/2006 9:42 PM Company Name: ATI Technologies, Inc. File Version: 6, 14, 10, 2490 Driver: Ati2evxx.dll File Size: 86016 (0x15000) File Date: 1/24/2006 9:42 PM Driver: Ati2evxx.exe File Size: 376832 (0x5C000) File Date: 1/24/2006 9:42 PM Driver: atitvo32.dll File Size: 17408 (0x4400) File Date: 1/24/2006 9:31 PM Company Name: ATI Technologies Inc. File Version: 6.14.10.4100 Driver: ATIDDC.DLL File Size: 81920 (0x14000) File Date: 1/24/2006 9:42 PM Company Name: ATI Technologies Inc. File Version: 6.14.10.5 Driver: ATIO9XXX.DLL File Size: 6582272 (0x647000) File Date: 1/24/2006 10:02 PM Company Name: ATI Technologies Inc. File Version: 4.14.10.4454 Driver: ATI3D2AG.DLL File Size: 1294429 (0x13C05D) File Date: 1/24/2006 9:38 PM Company Name: ATI Technologies Inc. File Version: 4.14.01.4075 Driver: ATI3D1AG.DLL File Size: 1081437 (0x10805D) File Date: 1/24/2006 9:36 PM Company Name: ATI Technologies Inc. File Version: 4.14.01.4075 Driver: ATIVVAXX.DLL File Size: 589930 (0x9006A) File Date: 1/24/2006 9:33 PM Company Name: ATI Technologies Inc. File Version: 4.14.01.0511 Driver: ATIVVXXX.VXD File Size: 127134 (0x1F09E) File Date: 1/24/2006 9:30 PM Company Name: ATI Technologies Inc. File Version: 4.14.7001 Driver: ATIVIFXX.DLL File Size: 34816 (0x8800) File Date: 1/24/2006 9:30 PM Company Name: ATI Technologies Inc. File Version: 4.14.3001 Driver: ATIV16XX.DLL File Size: 7552 (0x1D80) File Date: 1/24/2006 9:30 PM Company Name: ATI Technologies Inc. File Version: 4.14.3001 Driver: ATI3DUAG.DLL File Size: 1773654 (0x1B1056) File Date: 1/24/2006 9:41 PM Company Name: ATI Technologies Inc. File Version: 4.14.01.0512 Driver: ATI2I9AG.DLL File Size: 1175040 (0x11EE00) File Date: 1/24/2006 9:43 PM Company Name: ATI Technologies Inc. File Version: 4.15.1.9165 Driver: ati2cqag.DLL File Size: 225372 (0x3705C) File Date: 1/24/2006 9:29 PM Company Name: ATI Technologies Inc. File Version: 4.15.1.9165.060124 Driver: ATI2VXAG.VXD File Size: 465509 (0x71A65) File Date: 1/24/2006 9:44 PM Company Name: ATI Technologies Inc. File Version: 4.15.1.9165 Driver: ATI2DRAG.DRV File Size: 86000 (0x14FF0) File Date: 1/24/2006 9:42 PM Company Name: ATI Technologies Inc. File Version: 4.15.1.9165 ViewSonic VP930 Series Monitor Registry Key: HKEY_LOCAL_MACHINE\enum\MONITOR\VSCE41B\PCI_VEN_1002&DEV_5961&SUBSYS_280117E E&REV_01_000800 Alloc resources: None Forced resources: None Boot resources: None Filtered resources: None Basic resources: None Driver: Monitor\0000 Driver Date: 2-16-2008 Driver: VP930_Series.ICM File Size: Driver Not Installed File Date: Driver Not Installed Default Monitor Monitor This device is disabled. Registry Key: HKEY_LOCAL_MACHINE\enum\MONITOR\DEFAULT_MONITOR\PCI_VEN_1002&DEV_5961&SUBSYS _280117EE&REV_01_000800_1 Alloc resources: None Forced resources: None Boot resources: None Filtered resources: None Basic resources: None Driver: Monitor\0001 Driver Date: 4-23-1999 ********************************************************************** Modified Dates for DRVDATA.bin & DRVIDX.bin : February 25, 2008 ********************************************************************** Post your Autoexec.bat file SET PATH=%PATH%;C:\PROGRA~1\ATITEC~1\ATICON~1 Post your Config.sys (Empty) *********************************************************************** How many Registry keys contain the word "Default_Monitor"? HKEY_CURRENT_CONFIG\Enum\MONITOR\DEFAULT_MONITOR\{KEY} : {KEY} HKEY_CURRENT_CONFIG\Enum\MONITOR\DEFAULT_MONITOR\PCI_VEN_1002&DEV_5961&SUBSY S_280117EE&REV_01_000800_1\{KEY} : {KEY} HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\cfgmgr32\Phanto m\3A\HardWareKey : MONITOR\DEFAULT_MONITOR\PCI_VEN_1002&DEV_5961&SUBSYS_280117EE&REV_01_000800_ 1 HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0001\Matc hingDeviceId : Monitor\Default_Monitor HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\ASD\Prob\{CF2524C0-29AE- 11CF-97EA-00AA0034319D}\MONITOR\DEFAULT_MONITOR\PCI_VEN_1002&DEV_5961&SUBSYS _280117EE&REV_01_000800_1 : N/A HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\ASD\Prob\{9B4E7760-3196- 11CF-97EA-00AA0034319D}\MONITOR\DEFAULT_MONITOR\PCI_VEN_1002&DEV_5961&SUBSYS _280117EE&REV_01_000800_1 : N/A HKEY_LOCAL_MACHINE\Enum\MONITOR\DEFAULT_MONITOR\{KEY} : {KEY} HKEY_LOCAL_MACHINE\Enum\MONITOR\DEFAULT_MONITOR\PCI_VEN_1002&DEV_5961&SUBSYS _280117EE&REV_01_000800_1\{KEY} : {KEY} HKEY_LOCAL_MACHINE\Enum\MONITOR\DEFAULT_MONITOR\PCI_VEN_1002&DEV_5961&SUBSYS _280117EE&REV_01_000800_1\HardwareID : MONITOR\DEFAULT_MONITOR HKEY_LOCAL_MACHINE\Config\0001\Enum\MONITOR\DEFAULT_MONITOR\{KEY} : {KEY} HKEY_LOCAL_MACHINE\Config\0001\Enum\MONITOR\DEFAULT_MONITOR\PCI_VEN_1002&DEV _5961&SUBSYS_280117EE&REV_01_000800_1\{KEY} : {KEY} Tag: How do we clear or delete the temporary folders Tag: 879051
  - 7
    - Re: Pay Pal FRUSTRATION Hi, I was using Netscape 7 (over 5 years) with Java disabled. I didn't try enabling Java to find out if that would make a difference. Instead, I downloaded Fire Fox and used that browser. Now I can see my balance, etc. Why I didn't get any kind of warning with Netscape, is a mystery. Brad On Mon, 10 Mar 2008 13:27:45 GMT, in alt.anger you wrote: >Hi, > > PayPal made changes to their web site back in September. > > This is the first time I used Pay Pal after the changes and I can not see >my balance anymore. I never had this problem before they made changes. > > How do you see your balance? > > Thanks in advance, Brad > > Before you type your password, credit card number, etc., > be sure there is no active keystroke logger (spyware) in your PC. Tag: How do we clear or delete the temporary folders Tag: 879049
  - 8
    - Pay Pal FRUSTRATION Hi, PayPal made changes to their web site back in September. This is the first time I used Pay Pal after the changes and I can not see my balance anymore. I never had this problem before they made changes. How do you see your balance? Thanks in advance, Brad Before you type your password, credit card number, etc., be sure there is no active keystroke logger (spyware) in your PC. Tag: How do we clear or delete the temporary folders Tag: 879036
  - 9
    - CD Burning Is there a Windows 98 forum that would address a question about max write speed bufor CDs or this better suited for a Nero or Roxio community? -- { : [|]=( DaffyD® If I knew where I was I'd be there now. Tag: How do we clear or delete the temporary folders Tag: 879008
  - 10
    - Thing that flash by at startup are not always the same? How come with a number of windows 98 machines I have no two have the same thing coming up during the startup process? One just starts with a windows cloud picture windows then goes black then returns before finally I see the desktop. Another one has some screens of text on black mixed in sequence with the windows 98 cloud picture screen. And I also noticed that after months of a certain text on the screen one day it had some different information in text coming up for a few days then I guess it went back to the way it had been. All that text flies by so fast is there a way to freeze it and be able to actually read all of it? Tag: How do we clear or delete the temporary folders Tag: 878993
  - 11
    - ScanDisk, lost cluster Some applications hung up, so I restarted computer. After restart, system start ScanDisk to check hard drive for errors. In log file, there was some info: File system: There was one lost cluster. ScanDisk reclaimed the lost cluster as free space. Does this mean logical error, not physical damage of disk surface? Is it safe for hard drive? Does it possible find the damaged file and remove it? How to make Thorough test without fixing anything? Thanks, Tag: How do we clear or delete the temporary folders Tag: 878986
  - 12
    - I love it when you try to be clever Gary but there IS no such word as "arcania"! I love it when you try to be clever Gary but there IS no such word as "arcania"! -- Savagery of the relationships between people. Here, everyone is on the make, all of them doing their damndest to take someone else by surprise, to relieve this man of his property, to enjoy that girl's flesh. There is no gentleness, there are only pleasures. Eyes which already devour the easy prey offered them, eyes which seek out the chink in the armour, the weak point, the little patch of pale skin into which the nails can sink and bring blood spurting out. Spying eyes, fierce eyes, sharp eyes which loathe and wound. A look which passes summary judgment, a knowing look, one which wants, not to understand, but to keep at a distance, to consume at a distance. A kind of tentacle, eye- sucker clamped to the intellect's stomach. The world is not pure. The world is free, roamed by wild animals, inhabited by greedy, hate-filled monsters. Loneliness, indifference: hatred. J.M.G. LeClézio Tag: How do we clear or delete the temporary folders Tag: 878982
  - 13
    - Limited User Hi group, how do I configure limited users in Win98 SE? Is this possible?. For limited users I mean they cant install programs, nor access system files. thanks very much in advance, Carlos. Tag: How do we clear or delete the temporary folders Tag: 878967
  - 14
    - registry help,please! Greetings, Today, my 98 pc crashed and when I restarted it, it came up in the mode where you get 5 or so choices, normal, safe mode,etc. The #5 "command prompt only" was highlighted and I couldn't choose another, and all I see is the C:\> . What command do I put in to get it started again. I put in the # 5 and "command prompt only" and got "bad command" on both. It also said to run scanreg when it gets started. Is "scanreg" the command I use to start that? Do I need C: only? what are the other two symbols for? Any other suggestions are appreciated. Jim Tag: How do we clear or delete the temporary folders Tag: 878966
  - 15
    - Trying to get rid of DEFAULT_MONITOR I have embedded the text files in the E-mail rather than attach for easier access: ********************************************************* *********[HKEY_LOCAL_MACHINE\Enum\MONITOR]********* [HKEY_LOCAL_MACHINE\Enum\MONITOR] [HKEY_LOCAL_MACHINE\Enum\MONITOR\VSCE41B] [HKEY_LOCAL_MACHINE\Enum\MONITOR\VSCE41B\PCI_VEN_1002&DEV_5961&SUBSYS_280117 EE&REV_01_000800] "Capabilities"=hex:14,00,00,00 "InitMonitorPowerState"="0f" "EDID"=hex:00,ff,ff,ff,ff,ff,ff,00,5a,63,1b,e4,01,01,01,01,14,10,01,03,0e,26 ,\ 1f,78,2e,11,45,a4,5a,4a,a0,24,14,50,54,bf,ef,80,81,80,81,40,71,4f,01,01,01,\ 01,01,01,01,01,01,01,30,2a,00,98,51,00,2a,40,30,70,13,00,78,36,11,00,00,1e,\ 00,00,00,ff,00,51,38,48,30,36,32,30,30,31,32,35,30,0a,00,00,00,fd,00,32,4b,\ 1e,52,0e,00,0a,20,20,20,20,20,20,00,00,00,fc,00,56,50,39,33,30,20,53,65,72,\ 69,65,73,0a,00,e5 "HardwareID"="Monitor\\VSCE41B" "Class"="Monitor" "SerialNum"="Q8H062001250" "DeviceDesc"="ViewSonic VP930 Series" "MaxResolution"="1280,1024" "MonitorRanges"="30-82,50-75,+,+" "DPMS"="1" "ClassGUID"="{4D36E96E-E325-11CE-BFC1-08002BE10318}" "Driver"="Monitor\\0018" "Mfg"="ViewSonic" "ConfigFlags"=hex:00,00,00,00 [HKEY_LOCAL_MACHINE\Enum\MONITOR\DEFAULT_MONITOR] [HKEY_LOCAL_MACHINE\Enum\MONITOR\DEFAULT_MONITOR\PCI_VEN_1002&DEV_5961&SUBSY S_280117EE&REV_01_000800_1] "Capabilities"=hex:14,00,00,00 "InitMonitorPowerState"="0f" "HardwareID"="Monitor\\Default_Monitor" "ClassGUID"="{4D36E96E-E325-11CE-BFC1-08002BE10318}" "Class"="Monitor" "Driver"="Monitor\\0019" "Mfg"="(Standard monitor types)" "DeviceDesc"="Default Monitor" "ConfigFlags"=hex:00,00,00,00 **************************************************************************** **** ********[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor] ********* [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor] @="Monitors" "Installer"="SetupX.Dll, Monitor_ClassInstaller" "Icon"="-1" "Link"="{4D36E96E-E325-11CE-BFC1-08002BE10318}" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0001] "InfPath"="MONITOR.INF" "InfSection"="Unknown.Install" "ProviderName"="Microsoft" "DriverDate"=" 4-23-1999" "DriverDesc"="Default Monitor" "MatchingDeviceId"="Monitor\\Default_Monitor" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0001\MOD ES] [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0001\MOD ES\640,480] @="" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0004] "MaxResolution"="1600,1200" "DPMS"="1" "InfPath"="MONITOR.INF" "InfSection"="VESADDC.Install" "ProviderName"="Microsoft" "DriverDate"=" 4-23-1999" "DriverDesc"="Plug and Play Monitor" "MatchingDeviceId"="*PNP09FF" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0004\MOD ES] [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0004\MOD ES\1600,1200] @="" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0005] "MaxResolution"="1600,1200" "DPMS"="1" "InfPath"="MONITOR.INF" "InfSection"="VESADDC.Install" "ProviderName"="Microsoft" "DriverDate"=" 4-23-1999" "DriverDesc"="Plug and Play Monitor" "MatchingDeviceId"="*PNP09FF" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0005\MOD ES] [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0005\MOD ES\1600,1200] @="" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0006] "InfPath"="MONITOR.INF" "InfSection"="Unknown.Install" "ProviderName"="Microsoft" "DriverDate"=" 4-23-1999" "DriverDesc"="Default Monitor" "MatchingDeviceId"="Monitor\\Default_Monitor" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0006\MOD ES] [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0006\MOD ES\640,480] @="" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0007] "InfPath"="MONITOR.INF" "InfSection"="Unknown.Install" "ProviderName"="Microsoft" "DriverDate"=" 4-23-1999" "DriverDesc"="Default Monitor" "MatchingDeviceId"="Monitor\\Default_Monitor" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0007\MOD ES] [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0007\MOD ES\640,480] @="" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0008] "ICMProfile"=hex:56,50,39,33,30,5f,53,65,72,69,65,73,2e,49,43,4d,00,00 "MaxResolution"="1280,1024" "DPMS"="1" "InfPath"="VIEWSO~1.INF" "InfSection"="VP930_Series.Install" "ProviderName"="ViewSonic" "DriverDate"=" 2-16-2008" "DriverDesc"="ViewSonic VP930 Series" "MatchingDeviceId"="Monitor\\VSCE41B" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0008\MOD ES] [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0008\MOD ES\1280,1024] "Mode1"="30-82,50-75,+,+" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0009] "InfPath"="MONITOR.INF" "InfSection"="Unknown.Install" "ProviderName"="Microsoft" "DriverDate"=" 4-23-1999" "DriverDesc"="Default Monitor" "MatchingDeviceId"="Monitor\\Default_Monitor" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0009\MOD ES] [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0009\MOD ES\640,480] @="" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0010] "ICMProfile"=hex:56,50,39,33,30,5f,53,65,72,69,65,73,2e,49,43,4d,00,00 "MaxResolution"="1280,1024" "DPMS"="1" "InfPath"="VIEWSO~1.INF" "InfSection"="VP930_Series.Install" "ProviderName"="ViewSonic" "DriverDate"=" 2-16-2008" "DriverDesc"="ViewSonic VP930 Series" "MatchingDeviceId"="Monitor\\VSCE41B" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0010\MOD ES] [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0010\MOD ES\1280,1024] "Mode1"="30-82,50-75,+,+" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0011] "InfPath"="MONITOR.INF" "InfSection"="Unknown.Install" "ProviderName"="Microsoft" "DriverDate"=" 4-23-1999" "DriverDesc"="Default Monitor" "MatchingDeviceId"="Monitor\\Default_Monitor" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0011\MOD ES] [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0011\MOD ES\640,480] @="" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0000] "ICMProfile"=hex:56,50,39,33,30,5f,53,65,72,69,65,73,2e,49,43,4d,00,00 "MaxResolution"="1280,1024" "DPMS"="1" "InfPath"="VIEWSO~1.INF" "InfSection"="VP930_Series.Install" "ProviderName"="ViewSonic" "DriverDate"=" 2-16-2008" "DriverDesc"="ViewSonic VP930 Series" "MatchingDeviceId"="Monitor\\VSCE41B" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0000\MOD ES] [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0000\MOD ES\1280,1024] "Mode1"="30-82,50-75,+,+" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0002] "InfPath"="MONITOR.INF" "InfSection"="Unknown.Install" "ProviderName"="Microsoft" "DriverDate"=" 4-23-1999" "DriverDesc"="Default Monitor" "MatchingDeviceId"="Monitor\\Default_Monitor" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0002\MOD ES] [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0002\MOD ES\640,480] @="" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0003] "InfPath"="MONITR11.INF" "InfSection"="VCDTS21367-1.Install" "ProviderName"="Microsoft" "DriverDesc"="%VCDTS21367-1%" "MatchingDeviceId"="Monitor\\OQI4D31" "DPMS"="1" "DriverDate"=" 4-23-1999" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0003\MOD ES] [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0003\MOD ES\1600,1280] "Mode1"="30-95,50-160,+,+" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0012] "ICMProfile"=hex:56,50,39,33,30,5f,53,65,72,69,65,73,2e,49,43,4d,00,00 "MaxResolution"="1280,1024" "DPMS"="1" "InfPath"="VIEWSO~1.INF" "InfSection"="VP930_Series.Install" "ProviderName"="ViewSonic" "DriverDate"=" 2-16-2008" "DriverDesc"="ViewSonic VP930 Series" "MatchingDeviceId"="Monitor\\VSCE41B" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0012\MOD ES] [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0012\MOD ES\1280,1024] "Mode1"="30-82,50-75,+,+" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0013] "InfPath"="MONITOR.INF" "InfSection"="Unknown.Install" "ProviderName"="Microsoft" "DriverDate"=" 4-23-1999" "DriverDesc"="Default Monitor" "MatchingDeviceId"="Monitor\\Default_Monitor" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0013\MOD ES] [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0013\MOD ES\640,480] @="" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0014] "ICMProfile"=hex:56,50,39,33,30,5f,53,65,72,69,65,73,2e,49,43,4d,00,00 "MaxResolution"="1280,1024" "DPMS"="1" "InfPath"="VIEWSO~1.INF" "InfSection"="VP930_Series.Install" "ProviderName"="ViewSonic" "DriverDate"=" 2-16-2008" "DriverDesc"="ViewSonic VP930 Series" "MatchingDeviceId"="Monitor\\VSCE41B" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0014\MOD ES] [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0014\MOD ES\1280,1024] "Mode1"="30-82,50-75,+,+" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0015] "InfPath"="MONITOR.INF" "InfSection"="Unknown.Install" "ProviderName"="Microsoft" "DriverDate"=" 4-23-1999" "DriverDesc"="Default Monitor" "MatchingDeviceId"="Monitor\\Default_Monitor" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0015\MOD ES] [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0015\MOD ES\640,480] @="" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0016] "ICMProfile"=hex:56,50,39,33,30,5f,53,65,72,69,65,73,2e,49,43,4d,00,00 "MaxResolution"="1280,1024" "DPMS"="1" "InfPath"="VIEWSO~1.INF" "InfSection"="VP930_Series.Install" "ProviderName"="ViewSonic" "DriverDate"=" 2-16-2008" "DriverDesc"="ViewSonic VP930 Series" "MatchingDeviceId"="Monitor\\VSCE41B" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0016\MOD ES] [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0016\MOD ES\1280,1024] "Mode1"="30-82,50-75,+,+" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0017] "InfPath"="MONITOR.INF" "InfSection"="Unknown.Install" "ProviderName"="Microsoft" "DriverDate"=" 4-23-1999" "DriverDesc"="Default Monitor" "MatchingDeviceId"="Monitor\\Default_Monitor" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0017\MOD ES] [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0017\MOD ES\640,480] @="" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0018] "ICMProfile"=hex:56,50,39,33,30,5f,53,65,72,69,65,73,2e,49,43,4d,00,00 "MaxResolution"="1280,1024" "DPMS"="1" "InfPath"="VIEWSO~1.INF" "InfSection"="VP930_Series.Install" "ProviderName"="ViewSonic" "DriverDate"=" 2-16-2008" "DriverDesc"="ViewSonic VP930 Series" "MatchingDeviceId"="Monitor\\VSCE41B" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0018\MOD ES] [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0018\MOD ES\1280,1024] "Mode1"="30-82,50-75,+,+" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0019] "InfPath"="MONITOR.INF" "InfSection"="Unknown.Install" "ProviderName"="Microsoft" "DriverDate"=" 4-23-1999" "DriverDesc"="Default Monitor" "MatchingDeviceId"="Monitor\\Default_Monitor" [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0019\MOD ES] [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Monitor\0019\MOD ES\640,480] @="" *********************************************** ********MSINFO32_COMPONENT_DISPLAY******* RADEON 9200 SERIES Display Registry Key: HKEY_LOCAL_MACHINE\enum\PCI\VEN_1002&DEV_5961&SUBSYS_280117EE&REV_01\000800 Alloc resources: Logical Configuration 0 IRQ: 11 Mask: xFFFF snip........ Forced resources: None Boot resources: None Filtered resources: Logical Configuration 0 IRQ: 11 Mask: xFFFF snip........ Basic resources: Logical Configuration 0 IRQ: 0 Mask: xFFFF snip........ HW Revision: 001 Driver: Display\0000 Driver Date: 2- 3-2006 Driver: vga.drv File Size: 52080 (0xCB70) File Date: 4/23/1999 10:22 AM Company Name: Microsoft Corporation File Version: 4.10.1998 Driver: atricdxx.enu File Size: 69632 (0x11000) File Date: 1/24/2006 10:09 PM Company Name: ATI Technologies Inc. File Version: 6.14.10.2045 (8.03.98.4.050725) Driver: atiicdxx.sys File Size: 5376 (0x1500) File Date: 11/6/2002 2:48 PM Company Name: ATI Technologies Inc. File Version: 6.13.10.1005 Driver: atiicdxx.vxd File Size: 7849 (0x1EA9) File Date: 4/14/2003 8:07 PM Company Name: ATI Technologies Inc. File Version: 4.12.1003 Driver: atiicdxx.dll File Size: 339968 (0x53000) File Date: 1/24/2006 10:09 PM Company Name: ATI Technologies Inc. File Version: 6.14.10.2087 (8.03.98.4.050725) Driver: atiiiexx.dll File Size: 294912 (0x48000) File Date: 1/24/2006 10:13 PM Company Name: ATI Technologies Inc. File Version: 6.14.10.4003 Driver: atiiisxx.exe File Size: 13568 (0x3500) File Date: 2/11/2002 9:09 PM Driver: TI2DRAG.DRV File Size: Driver Not Installed File Date: Driver Not Installed Driver: ati2edxx.dll File Size: 30720 (0x7800) File Date: 1/24/2006 9:42 PM Company Name: ATI Technologies, Inc. File Version: 6, 14, 10, 2494 Driver: Oemdspif.dll File Size: 102400 (0x19000) File Date: 1/24/2006 9:42 PM Company Name: ATI Technologies, Inc. File Version: 6.14.0010 Driver: atipdlxx.dll File Size: 118784 (0x1D000) File Date: 1/24/2006 9:42 PM Company Name: ATI Technologies, Inc. File Version: 6, 14, 10, 2490 Driver: Ati2evxx.dll File Size: 86016 (0x15000) File Date: 1/24/2006 9:42 PM Driver: Ati2evxx.exe File Size: 376832 (0x5C000) File Date: 1/24/2006 9:42 PM Driver: atitvo32.dll File Size: 17408 (0x4400) File Date: 1/24/2006 9:31 PM Company Name: ATI Technologies Inc. File Version: 6.14.10.4100 Driver: ATIDDC.DLL File Size: 81920 (0x14000) File Date: 1/24/2006 9:42 PM Company Name: ATI Technologies Inc. File Version: 6.14.10.5 Driver: ATIO9XXX.DLL File Size: 6582272 (0x647000) File Date: 1/24/2006 10:02 PM Company Name: ATI Technologies Inc. File Version: 4.14.10.4454 Driver: ATI3D2AG.DLL File Size: 1294429 (0x13C05D) File Date: 1/24/2006 9:38 PM Company Name: ATI Technologies Inc. File Version: 4.14.01.4075 Driver: ATI3D1AG.DLL File Size: 1081437 (0x10805D) File Date: 1/24/2006 9:36 PM Company Name: ATI Technologies Inc. File Version: 4.14.01.4075 Driver: ATIVVAXX.DLL File Size: 589930 (0x9006A) File Date: 1/24/2006 9:33 PM Company Name: ATI Technologies Inc. File Version: 4.14.01.0511 Driver: ATIVVXXX.VXD File Size: 127134 (0x1F09E) File Date: 1/24/2006 9:30 PM Company Name: ATI Technologies Inc. File Version: 4.14.7001 Driver: ATIVIFXX.DLL File Size: 34816 (0x8800) File Date: 1/24/2006 9:30 PM Company Name: ATI Technologies Inc. File Version: 4.14.3001 Driver: ATIV16XX.DLL File Size: 7552 (0x1D80) File Date: 1/24/2006 9:30 PM Company Name: ATI Technologies Inc. File Version: 4.14.3001 Driver: ATI3DUAG.DLL File Size: 1773654 (0x1B1056) File Date: 1/24/2006 9:41 PM Company Name: ATI Technologies Inc. File Version: 4.14.01.0512 Driver: ATI2I9AG.DLL File Size: 1175040 (0x11EE00) File Date: 1/24/2006 9:43 PM Company Name: ATI Technologies Inc. File Version: 4.15.1.9165 Driver: ati2cqag.DLL File Size: 225372 (0x3705C) File Date: 1/24/2006 9:29 PM Company Name: ATI Technologies Inc. File Version: 4.15.1.9165.060124 Driver: ATI2VXAG.VXD File Size: 465509 (0x71A65) File Date: 1/24/2006 9:44 PM Company Name: ATI Technologies Inc. File Version: 4.15.1.9165 Driver: ATI2DRAG.DRV File Size: 86000 (0x14FF0) File Date: 1/24/2006 9:42 PM Company Name: ATI Technologies Inc. File Version: 4.15.1.9165 ViewSonic VP930 Series Monitor Registry Key: HKEY_LOCAL_MACHINE\enum\MONITOR\VSCE41B\PCI_VEN_1002&DEV_5961&SUBSYS_280117E E&REV_01_000800 Alloc resources: None Forced resources: None Boot resources: None Filtered resources: None Basic resources: None Driver: Monitor\0018 Driver Date: 2-16-2008 Driver: VP930_Series.ICM File Size: Driver Not Installed File Date: Driver Not Installed Default Monitor Monitor This device is disabled. Registry Key: HKEY_LOCAL_MACHINE\enum\MONITOR\DEFAULT_MONITOR\PCI_VEN_1002&DEV_5961&SUBSYS _280117EE&REV_01_000800_1 Alloc resources: None Forced resources: None Boot resources: None Filtered resources: None Basic resources: None Driver: Monitor\0019 Driver Date: 4-23-1999 ******************************************************* *****************AUTOEXEC_BAT*********************** SET PATH=%PATH%;C:\PROGRA~1\ATITEC~1\ATICON~1 ******************************************************** *******************CONFIG_SYS************************* (Empty) ******************************************************** ****LISTING OF ALL ENTRIES OF DEFAULT_MONITOR****** jv16 PowerTools 2007 [1.7.0.422] Data fields are: Key, Entry's name, Value *HKCC\Enum\MONITOR\DEFAULT_MONITOR\, {KEY}, {KEY} *HKCC\Enum\MONITOR\DEFAULT_MONITOR\PCI_VEN_1002&DEV_5961&SUBSYS_280117EE&REV _01_000800_1\, {KEY}, {KEY} *HKLM\Software\Microsoft\Windows\CurrentVersion\cfgmgr32\Phantom\3A\, HardWareKey, MONITOR\DEFAULT_MONITOR\PCI_VEN_1002&DEV_5961&SUBSYS_280117EE&REV_01_000800_ 1 *HKLM\System\CurrentControlSet\Services\Class\Monitor\0001\, MatchingDeviceId, Monitor\Default_Monitor *HKLM\System\CurrentControlSet\Services\Class\Monitor\0006\, MatchingDeviceId, Monitor\Default_Monitor *HKLM\System\CurrentControlSet\Services\Class\Monitor\0007\, MatchingDeviceId, Monitor\Default_Monitor *HKLM\System\CurrentControlSet\Services\Class\Monitor\0009\, MatchingDeviceId, Monitor\Default_Monitor *HKLM\System\CurrentControlSet\Services\Class\Monitor\0011\, MatchingDeviceId, Monitor\Default_Monitor *HKLM\System\CurrentControlSet\Services\Class\Monitor\0002\, MatchingDeviceId, Monitor\Default_Monitor *HKLM\System\CurrentControlSet\Services\Class\Monitor\0013\, MatchingDeviceId, Monitor\Default_Monitor *HKLM\System\CurrentControlSet\Services\Class\Monitor\0015\, MatchingDeviceId, Monitor\Default_Monitor *HKLM\System\CurrentControlSet\Services\Class\Monitor\0017\, MatchingDeviceId, Monitor\Default_Monitor *HKLM\System\CurrentControlSet\Services\Class\Monitor\0019\, MatchingDeviceId, Monitor\Default_Monitor *HKLM\System\CurrentControlSet\Control\ASD\Prob\{CF2524C0-29AE-11CF-97EA-00A A0034319D}\, MONITOR\DEFAULT_MONITOR\PCI_VEN_1002&DEV_5961&SUBSYS_280117EE&REV_01_000800_ 1, N/A *HKLM\System\CurrentControlSet\Control\ASD\Prob\{9B4E7760-3196-11CF-97EA-00A A0034319D}\, MONITOR\DEFAULT_MONITOR\PCI_VEN_1002&DEV_5961&SUBSYS_280117EE&REV_01_000800_ 1, N/A *HKLM\Enum\MONITOR\DEFAULT_MONITOR\, {KEY}, {KEY} *HKLM\Enum\MONITOR\DEFAULT_MONITOR\PCI_VEN_1002&DEV_5961&SUBSYS_280117EE&REV _01_000800_1\, {KEY}, {KEY} *HKLM\Enum\MONITOR\DEFAULT_MONITOR\PCI_VEN_1002&DEV_5961&SUBSYS_280117EE&REV _01_000800_1\, HardwareID, Monitor\Default_Monitor *HKLM\Config\0001\Enum\MONITOR\DEFAULT_MONITOR\, {KEY}, {KEY} *HKLM\Config\0001\Enum\MONITOR\DEFAULT_MONITOR\PCI_VEN_1002&DEV_5961&SUBSYS_ 280117EE&REV_01_000800_1\, {KEY}, {KEY} Tag: How do we clear or delete the temporary folders Tag: 878958
  - 16
    - Ad-Aware SE Personal Try to download the defs file from http://download.lavasoft.com/public/defs.zip Tag: How do we clear or delete the temporary folders Tag: 878955
  - 17
    - How to choose a motherboard? Win98SE meets very nearly all current needs (inc. EMACS for DOS and its DOS printer) and some of my apps are not fully compatible with XP (e.g. Quattro v.8 and Paradox v.7) and I have had 3 hardware breakdowns (dead sound-on- board circuit and two power supplies) -- so I must plan to replace with something equally functional the ASUS P4P800S motherboard, running Win98SE on a Pentium 4 2.8 GHz and 512 Mb RAM. 1. How do I evaluate motherboards for functionality and durability? 2. Drives: most MBs now seem to offer only two or three card slots. My (year 2004) ASUS has six populated by video card, modem, TV receiver, audio card, etc. and I should like to have as many, so as to use the Audigy sound card (2 cards) etc. 2b. I have been assured that MBs set up for SATA drives can also connect IDE drives. -- Don Phillipson Carlsbad Springs (Ottawa, Canada) Tag: How do we clear or delete the temporary folders Tag: 878945
  - 18
    - CERT Alert - SUN JAVA - JRE 5 and 6 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 National Cyber Alert System Technical Cyber Security Alert TA08-066A Sun Updates for Multiple Vulnerabilities in Java Original release date: March 6, 2008 Last revised: -- Source: US-CERT Systems Affected Sun Java Runtime Environment versions * JDK and JRE 6 Update 4 and earlier * JDK and JRE 5.0 Update 14 and earlier * SDK and JRE 1.4.2_16 and earlier * SDK and JRE 1.3.1_21 and earlier Overview Sun has released alerts to address multiple vulnerabilities affecting the Sun Java Runtime Environment. The most severe of these vulnerabilities could allow a remote attacker to execute arbitrary code. I. Description The Sun Java Runtime Environment (JRE) allows users to run Java applications in a browser or as standalone programs. Sun has released updates to the Java Runtime Environment software to address multiple vulnerabilities. Further details about these vulnerabilities are available in the US-CERT Vulnerability Notes Database. Sun released the following alerts to address these issues: * 233321 Two Security Vulnerabilities in the Java Runtime Environment Virtual Machine * 233322 Security Vulnerability in the Java Runtime Environment With the Processing of XSLT Transformations * 233323 Multiple Security Vulnerabilities in Java Web Start May Allow an Untrusted Application to Elevate Privileges * 233324 A Security Vulnerability in the Java Plug-in May Allow an Untrusted Applet to Elevate Privileges * 233325 Vulnerabilties in the Java Runtime Environment image Parsing Library * 233326 Security Vulnerability in the Java Runtime Environment May Allow Untrusted JavaScript Code to Elevate Privileges Through Java APIs * 233327 Buffer Overflow Vulnerability in Java Web Start May Allow an Untrusted Application to Elevate its Privileges II. Impact The impacts of these vulnerabilities vary. The most severe of these vulnerabilities allows a remote attacker to execute arbitrary code. III. Solution Apply an update from Sun These issues are addressed in the following versions of the Sun Java Runtime environment: * JDK and JRE 6 Update 5 or later * JDK and JRE 5.0 Update 15 or later * SDK and JRE 1.4.2_17 or later * SDK and JRE 1.3.1_21 and earlier If you install the latest version of Java, older versions of Java may remain installed on your computer. If these versions of Java are not needed, you may wish to remove them. For instructions on how to remove older versions of Java, refer to the following instructions from Sun. Disable Java Disable Java in your web browser, as specified in the Securing Your Web Browser document. While this does not fix the underlying vulnerabilities, it does block a common attack vector. IV. References * US-CERT Vulnerability Notes for Sun Alerts - <http://www.kb.cert.org/vuls/byid?searchview&query=SUNJAVA_020608> * Securing Your Web Browser - <http://www.us-cert.gov/reading_room/securing_browser/> * Sun Alert 233321 - <http://sunsolve.sun.com/search/document.do?assetkey=1-66-233321-1> * Sun Alert 233322 - <http://sunsolve.sun.com/search/document.do?assetkey=1-66-233322-1> * Sun Alert 233323 - <http://sunsolve.sun.com/search/document.do?assetkey=1-66-233323-1> * Sun Alert 233324 - <http://sunsolve.sun.com/search/document.do?assetkey=1-66-233324-1> * Sun Alert 233325 - <http://sunsolve.sun.com/search/document.do?assetkey=1-66-233325-1> * Sun Alert 233326 - <http://sunsolve.sun.com/search/document.do?assetkey=1-66-233326-1> * Sun Alert 233327 - <http://sunsolve.sun.com/search/document.do?assetkey=1-66-233327-1> * Java SE Technologies at a Glance - <http://java.sun.com/javase/technologies/> * Java SE Security - <http://java.sun.com/javase/technologies/security/index.jsp> * Can I remove older versions of the JRE after installing a newer version? - <http://www.java.com/en/download/faq/5000070400.xml> ____________________________________________________________________ The most recent version of this document can be found at: <http://www.us-cert.gov/cas/techalerts/TA08-066A.html> ____________________________________________________________________ Feedback can be directed to US-CERT Technical Staff. Please send email to <cert@cert.org> with "TA08-066A Feedback VU#223028" in the subject. ____________________________________________________________________ For instructions on subscribing to or unsubscribing from this mailing list, visit <http://www.us-cert.gov/cas/signup.html>. ____________________________________________________________________ Produced 2008 by US-CERT, a government organization. Terms of use: <http://www.us-cert.gov/legal.html> ____________________________________________________________________ Revision History March 6, 2008: Initial release -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (GNU/Linux) iQEVAwUBR9BZrfRFkHkM87XOAQLTzQgAnYzrhCIWEuWRlfH8tVWZl159MZ+vEX5Z TYwjqClljWyy8edzxNWRUV0pqHVe799hJtRA1luKgTEOWqOtXLrw6/AGdpIf+3CB ikiAEQR4Cirvt5lHRrlZjMG7eBPZwGQtFgHxzVrEE2lwDl5UDGejMDz+rTwJCm7/ HWBkktM7suHWpZu9jKFpfnizFTbzRSXw/CcALe/FwFxjND3hBjnDWv2Gu7bmMaEA 7a/Q8IJ8mNiU6ZIYdriQEVZHZs6IHtzyw39Qh9NpL+NAGuBxna4MXAOtqoIR1Rvt FyzZUfjMvEBSKHvA6VWrWmt/JlaSlcVUZB7jRIyInYTvbYPwAnylXg== =U6aE -----END PGP SIGNATURE----- -- MEB http://peoplescounsel.orgfree.com _________ Tag: How do we clear or delete the temporary folders Tag: 878931
  - 19
    - PCMCIA card reader with SRAM card I just installed a PCI adapter to use PCMCIA SRAM cards in my win98 desktop computer. Windows recognized both the adapter and the memory card and installed new drivers. I rebooted. Control panel->System reports the devices are there and working properly. The problem is that the drive has not been assigned a drive letter and doesn't show up in My Computer or Windows File Manager so I can't transfer files to or from the card. There is no icon for it that I can see other than one in the Task Bar that allows you to stop the drive for card removal. It works. What am I missing? Tag: How do we clear or delete the temporary folders Tag: 878930
  - 20
    - Connecting USB to Ethernet adaptor Hi- I am trying to attach a USB to Ethernet adaptor to get broadband on my W98SE (this works using a normal USB-B to USB-A connection, but I need a 10m cable, hence ethernet...). I load the adaptors driver disk (does not do much, ie. install- but this installed automatically on my XP). The new hardware wizard proceeds; Unknown device-Search for the best driver-after I specify D:\Windows 98 through browse and click next it says windows is unable to locate a driver for this device. I have tried updaing the driver through the Device Manager (Other devices-Unknown Device) and through installing one of the attachments through Windows Explorer (D:\Windows 98). Does anyone have a suggestion? Is this a W98SE problem as I installed it successfully on XP (as a test). The adaptor is compatible with W98SE. Tag: How do we clear or delete the temporary folders Tag: 878925
  - 21
    - Available memory after start-up Not really a problem, but an observation. I run TClock which apart from the date and time in the system tray has been configured to show 'available RAM' For a couple of years I've noticed big variations in the amount of free memory available immediately after boot-up. Hence I've just disabled every thing except TClock via MSCONFIG I have 448 Meg of physical RAM. If I clean boot the PC say ten times in a row, then after start-up, approximately: On about six occasions I have 304 Meg of free memory available On about three occasions I have 264 Meg of free memory On one occasion I have 230 Meg of free memory This is 'repeatable', but it seems random as to which figure I get on startup. I may get two 230s in a row, but will then probably get plenty of 304s before the odd 264 kicks in. Just curious as to where 40 or 70 Meg can occasionally disappear to ? With all the usual stuff (virus checker, firewall, USB monitors etc) loaded, each of these figures drops by some 25 Meg, hence losing 40 or 70 for apparently nothing is peculiar. Running 98SE with 'all available updates' I have noticed on past occasions that some legitimate things seem to get loaded even though there's no call to the EXE anywhere in the registry. The wonders of Windoze! Graham Tag: How do we clear or delete the temporary folders Tag: 878924
  - 22
    - For the Geeks - Microsoft's non-Windows OS Singularity Interested in testing Microsoft's new non-Windows OS which uses "completely new" {non-legacy} code? RDK 1.1 - version 6709 Singularity http://www.codeplex.com/singularity http://research.microsoft.com/os/singularity/ -- MEB http://peoplescounsel.orgfree.com _________ Tag: How do we clear or delete the temporary folders Tag: 878920
  - 23
    - Really Big Start up problem Hello, everyone. Windows 98SE pc will not start up. I get the screen Checking NVRAM (16mb shared memory used) hit del to exit setup. That IS as far as start up goes. . . .shuts down (electrically). I have noticed the fan inside isn't working. (i've already taken off casing, unplugged cd rom drives (2)). ANY ideas are so welcome and I anticipate your replies. REspectfully, SandyMann Tag: How do we clear or delete the temporary folders Tag: 878901
  - 24
    - Error Message Operating System: Windows 98 se RAM: 768 Application: Quattro (for DOS) When trying to load the Quattro (for DOS) spreadsheet, I get the following error message "Out of Memory". The program loads but with loss of data. -- smg Tag: How do we clear or delete the temporary folders Tag: 878888
  - 25
    - =?Utf-8?Q?=EF=BB=BFDisk_Recovery_=28RE:_Computer_Fai?= ï»¿The start of this new Post regarding the â??Computer Failureâ?? Post was suggested by â??MEBâ??, and rightly so, as the that earlier Post was creating some confusion. As was discussed in the â??Computer Failureâ?? Post, the Microtime Computer, that I have been using for several years, has failed and I find it rather difficult to get it operational, again. There is a Primary Master and a Secondary Master HDâ??s installed in it. There are folders in both that have Data that I would like to recover. A more recent Computer, a Sony VAIO, that I am currently using, appears to have all that I would need to connect those HDâ??s and recover the desired Data and back up the same, if desired, on CDâ??s or Iomega Zip 250 MB Disks. The only obstacle is of possible compatibility issues. Some of what follows has been mentioned in various replies in the prior Post. Some new information has been added, since. In the Sony there is no Secondary Master, although the Primary Master has two partitions, as â??MEBâ?? indicated and as shown by the System Information pane of the Components/Storage Disks: IDE Type 47, Partitions 2 total 57..27GB. Disk 0, Partition 0, 15.63GB (shown as Local Disk C: in â??My Computerâ??}) Disk 0, Partition 1, 41.64GB (shown as Local Disk D:) Additionally, although not sure if it might be relevant, the following was also obtained.from the System Information panes (thru Start>Accessories>System Information): OS: Microsoft Windows, Version 4-90-3000 Build 3000 System Name: VAIO (Sony Corp) System Model: PCV-RX370DS(UC) System Type: X86 based PC Processor: Intel(R) Pentium(R) 4 CPU 1300MHz GenuineIntel 1296Mhz Bios Version: Award Medallion BIOS v6.0 Total Physical Memory: 127.43 MB Available Physical Memory: 2.07 MB Total Virtual Memory: 2.0 GB Available Virtual Memory: 1.77 GB Page File Space: 1.88 GB On the Disks pane: Description: GENERIC IDE DISK TYPE47 Manufacturer: (Standard disk drives) Model: IDE DISK TYPE47 Media Loaded: Yes Media Type: Fixed hard disk media Partitions: 2 Size: 57.27 GB Partition: Disk #0, Partition #0 Partition Size: 15.63 GB Partition: Disk #0, Partition #1 Partition Size: 41.64 GB The IRQ Pane listed several. The ones related to the IDEâ??s (to my thinking) are: IRQ 3 shows 3 times. One is for Intel 82801 BA/BAM SMBus Controller - 2443 IRQ 9 shows 10 times. Two of them pertain to the USB Ports: - Intel 82801 BA/BAM USB Universal Host Controller #1 - Intel 82801 BA/BAM USB Universal Host Controller #2 IRQ 14 - Intel 82801 BA ULTRA ATA Storage Controller - Primary IDE Controller (Dual FIFO) IRQ 15 - Intel 82801 BA ULTRA ATA Storage Controller - Secondary IDE Controller (Dual FIFO) System, arrived at thru Start>Settings>Control Panel, shows this (In brief): MS Windows ME 4.90.3000 Mfd and Supported by Sony Electr. Inc. - V32B5.0.0/ENV Genuine Intel - Intel[R] Pentium[R] 4 CPU - 128 MB RAM From the Device Manager Display: CD_ROM: - Pioneer DVD -ROM DVD-115R - Sony CD-RW CRX140E DISK DRIVE: - Generic IDE Disk Type47 - Generic Floppy Disk - Iomega Zip 250 HD Controllers: - Intel 82801BA Ultra ATA Storage Controller - Primary IDE Controller (Dual FIFO) - Secondary IDE Controller (Dual FIFO) While the Sony is booting, this appears: Diskette A: 1.44, 3.5 in. Diskette B: None Primary Master 61492 GB, UDMA 5 Primary Slave: None Secondary Master: CD_ROM, UDMA 2 Secondary Slave: CD_ROM. UDMA 2 and Serial Port: 3F8 Parallel Port: 378 Dram Type: RDRAM SPD on Modules: Yes Data Integrity: NON-ECC Looking at the jumper selection area of the Sonyâ??s HD. I see 2 rows of pins. There is a jumper on the leftmost pair of pins (top & bottom) closest to the Cable connection and another jumper between the top&bottom pins at the opposite end, or the end closest to the power cable. The storage HD from the failed Computer has similar layout, but the only jumper is at the last top 2 pins closest to the power cable. Again, I assume that it might be OK to connect this HD on the freed up connector of the Sony. As mentioned, the HD, referred by me as Storage HD, had been configured as a Primary Slave in the Computer that had failed. I allowed my curiosity to see if, by connecting the existing Primary Master HD to the end connector of the cable, I might cause any problem. All went well. I was further tempted to connect the storage HD from the failed Computer, but I did not, hoping to first get your ideas about doing so. The label on the storage HD shows its ID as: IBM OE - Model: DTTA-351010 E182115 HG P/N: 00K4091 10.1GB - MLC: F02573 CHS: 16383/16/63 LBA: 19.807.200 Sectors Hopefully, this will mean something to you, â??MEBâ?? or anyone else able to help. Thank you in advance for any reply! Tag: How do we clear or delete the temporary folders Tag: 878881

In win xp, we can clear/delete the TIF by %temp%, how do we clear the TIF in
Win98SE? In short, what must I do besides deleting my own unwanted folders in
order to free up space in my hdd. TIA

Top

Re: How do we clear or delete the temporary folders by Fan924

Fan924
Sat Mar 22 18:24:47 PDT 2008

In Internet Explorer, on the Tools menu, click Internet Options. On
the General tab, in the center section under Temporary Internet Files,
push Delete Files.

Top

Re: How do we clear or delete the temporary folders by Gary

Gary
Sat Mar 22 18:28:02 PDT 2008

See http://grystmill.com/articles/cleanboot.htm

--
Gary S. Terhune
MS-MVP Shell/User
www.grystmill.com

"pamshanta" <pamshanta@discussions.microsoft.com> wrote in message
news:A2DE9A3D-9199-4F2B-A066-662E05438D6F@microsoft.com...
> In win xp, we can clear/delete the TIF by %temp%, how do we clear the TIF
> in
> Win98SE? In short, what must I do besides deleting my own unwanted folders
> in
> order to free up space in my hdd. TIA

Top