dvd rewriter
just conected new dvd +/- rewriter to my computer , it did'nt detect new
hardware and when i tried to add hardware it could not find it. also my dvd
rom went missing aswell Tag: installed new dvd rewriter and it's not detected Tag: 330965
USB keyboard install not permitted
I am having a strange problem with a Windows XP pro machine.
When anyone other than a domain admin plugs in a USB keyboard the device
drivers are loaded into HID section of device manager but not into the
keyboard section so the device is unavailable.
I tried using the keyboard while in BIOS and had no problems
I tried it with my account (domain admin) and it works
I tried it with a local admin, or domain user account it doesn't work
This problem is local to this machine. Many other machines use this image on
the same domain without exhibiting the same problems. Tag: installed new dvd rewriter and it's not detected Tag: 330962
no icons on desktop screen after restarting
Hello,
I tried to upgarde to latest Antivirus (free upgrade from internet )
on my Dell inspirion 1300 machine and after installing system
automatically restarted itself.
now after restarting a blank desktop background screen appears without
any icons on desktop.
I tried doing system restore also chkdsk, still problem persists.
please help.
Naren Tag: installed new dvd rewriter and it's not detected Tag: 330961
Sony VAIO PCV-RX670 Desktop Freezes
My Sony VAIO PCV-RX670 desktop started freezes the other day. I put a
cd in the drive, and the cursor froze, and I had to power cycle.
Spent a ton of time trying to fix the problem. Swapped in a backup OS
hard drive. Ran lots of virus checks. Updated the BIOS. Took the
battery out to reset CMOS. Tested the RAM. None of this helped or
revealed any problem.
The one thing that helps is removing the CD-ROM drives. This lets me
use my computer for some time before a lockup, but it still happens.
With the CD-ROM's connected, I was having some trouble even POSTing.
I have a Pentium 4 1.8 Ghz with an Asus mobo that has the Intel 845
chipset. The event viewer doesn't show anything, and I didn't make
any changes that might have triggered this problem.
Any ideas? Thanks. Tag: installed new dvd rewriter and it's not detected Tag: 330959
different cpu / hd image...
I know it would of course have been best to have upgraded cpu first but, the
replacement cpu has not arrived yet.
...Packard Bell iXtreme 6052 / XP Home ed. fully MS updated.
Have just added 256mb pc2700 as it was partially strangled by its' factory
fitted 256mb pc2700.
...tidied it up ...lots !, pruned XP services and startup items etc,
...the remaining partially "strangled" effect is of course thanks to the the
Celeron 2.6's / lowly 128kb L2 on-die cache.
...and seeing as I'd reached that heavenly point where all hardware and
software is behaving in a robust and well-behaved fashion, I Norton Ghosted
its' hd onto my external USB hd in 1gb chunks, and burnt those out onto 6 x
dvd r's.
Now, when it arrives I will swap out the Celeron for a Pentium IV SL6GT
2.5ghz / 512bm L2 cache,
( couldn't find a skt 478 2.6ghz BX80532PC2600D / RK80532PC064512 SL6GU
SL6HB, SL6PP, SL6QR, SL6SB / QMT0ES, QWB5, SL6GU, SL6PP, SL6SB for a
sensible price ! )
My question is simply, if one were to restore the aforementioned hd image,
and XP discovers a different cpu, am I right in thinking that this should
not cause problems ?
btw this machine has never yet had any "significant" changes to hardware
that MS would have noted :-)
regards, Richard Tag: installed new dvd rewriter and it's not detected Tag: 330958
Frequent Crash of Windows XP
Hi,
I am facing the problem very often especially at one specific
location...
As mentioned in various posts.. we also suspected the hardware and we
have changed the hardware (infact did it quite a few times). We have
now replaced the complete machine of different brand etc.
The same hardware is running in my office perfectly fine. I have put
the machine on the raw power and left it running for few days. It
works even when the machine is abnormally switch off (due to power
loss) multiple time in a day.
Where as when the same machine with same configuration is running in
the field it carshes very offten with the error messages similar to "C:
\Windows\System32\Config\System is missing or corrupt".
At times I am able to recover the disk from the crash.
I am basically looking for the answer that why does this machine
crashes, where as we do abnormal swtich off (without proper shutdown)
of the PCs in office / home, they don't crash. They why this machine.
Two configurations of the machine which we have tried are -
1. Via C7 Mother board with 1 GHz processor, 1 GB RAM, 4 GB Disk On
Module
2. Intel Borad with 1GHz processor, 1 GB RAM, 4 GB InnoDisk Disk On
Module (HDD), multiple serial ports (4 in number).
Operating System: Windows XP Professional SP2 without any hot fixes/
updates (earlier we were using Windows XP Embedded SP 2 with Feature
Pack 2007, we switched to XP Professional thinking we are missing
something in XP Embedded configuration)
We have tried different make of DOMs, suspecting something to do with
the quality of DOM. We have also tried switching of the "Write Cache
on Disk" option of Windows.
The application that we are running is basically polling multiple
devices on the periodic basis, every few milliseconds. It then writes
the data to SQL Express Database. Application is developed using MFC.
Any answer / tips are welcomed.
Thanks
Rajesh Tag: installed new dvd rewriter and it's not detected Tag: 330955
C Drive can't be opened
I'm not sure if I got infected by a virus. I can't seem to open my c drive, D
Drive, etc. When I click on my computer > C Drive , it looks for an
application to open it. The C and D drives are seen and recognized, and the
files in it can only be opened when I use a specific application (word, excel
File > Open > C:, etc). How do i resolve this issue? Tag: installed new dvd rewriter and it's not detected Tag: 330945
Return to the original BIOS
Hello
I will try to explain my problem (sorry for the language)
Yesterday I updated my BIOS, and now I have to push the power button two
times to start the computer. I want to restore the original Bios
I try this :
-Remove the battery clock for 15 min
-Change the jumper to maintenance mode, but only a new option appears in my
Setup nothign to back to the original BIOS
-And finally install with an .exe the original Bios provided by Intel and
there is an error
My mainboard is an Intel DP35DP
Thanks for your help Tag: installed new dvd rewriter and it's not detected Tag: 330940
CD Rom and DVD problems
My CD rom is MITSU&MI CR-48XCTE and it does not read a disc when inserted.
The device manager and troubleshoot do not recognize a problem. (Drive F)
My DVD is IDE DVD-ROM16X This does read the disc, but I can not download
anything to the disc. It says I do not have permission to download and to
see the administrator - which I do not know what that means or how to gain
access to change so I can download to the disc. (I am the owner and sole user
of this computer) The device mangaer and troubleshoot do not recognize a
problem with this either. The drivers are updated on both and they have
worked in the past without any new additions being installed. (Drive E)
Have both disc drives just gone bad and I need new ones or is there
something I have accidently clicked on that the drives do not work
Thanks for your help.
Operating System: Windows XP
--
golfeng Tag: installed new dvd rewriter and it's not detected Tag: 330927
best memory config for xp
My system is running XP on an Athalon 64 processor with a DFI mobo. It is
still running fine, but currently only has one gig of RAM. I want to upgrade
the RAM but I am not sure which configuration will best be managed by XP.
Here are my choices:
1. 2GB using 400mhz DDR (2 modules)
2. 3GB using 333mhz DDR (3 modules)
I'm assuming that 3GB beats 2GB regardless of speed, but I am not that
familiar with how XP manages memory. I know that Vista (32-bit) will run up
to 4GB but I'm not sure about XP.
Can anyone help me out? Thanks. Tag: installed new dvd rewriter and it's not detected Tag: 330914
Any Way To Access Serial Numbers?
I didn't copy down my Nvidia video card's serial number before I sent
the documentation away for a rebate. Is there any way I can access it
via software so I don't have to pull the card out of my machine? It
isn't displayed in the System Information portion of the Nvidia Control
Panel. I want to contact technical support and one of the requirements
is the card's serial number.
Thanks Tag: installed new dvd rewriter and it's not detected Tag: 330910
PC start
My desktop PC(XPSP2) doesn't do anything when I push the "on" button. The
only way to get it starting is to shut-off the mains connection for a while
(`~ 10 minutes), and after reconnecting I get a normal startup when I push
the "on" button. Is this "repairable"? Tag: installed new dvd rewriter and it's not detected Tag: 330908
New Disk - Initialize, Partition, and Format
I've encountered a confusing set of messages when I boot my machine
with a new SATA HDD installed. I find that XP Pro wants to send it
through a wizard to initialize it and set it up as a dynamic disk.
Here is some relevant basic info on my machine from a Belarc Advisor
Audit
System Model
Gigabyte Technology Co., Ltd. EP35-DS3P
Main Circuit Board
Board: Gigabyte Technology Co., Ltd. EP35-DS3P
Bus Clock: 266 megahertz
BIOS: Award Software International, Inc. F2 01/02/2008
I snapped some digital photos during the boot sequence. I find that I
am told that at:
Port-04: Hard Disk, WBC WD5000AAKS 00A7B0
(Drive is controlled by the RAID BIOS)
As the screen scrolls, I find the following report:
4 WD5000AAKS-0 WD-WMASY0568494 465.8GB Non-RAID Disk
I find this mixed message very confusing.
When I open Computer Management (Local)>Storage>Disk Management, I
find that XP Pro opens the "Initialize and Convert Disk Wizard to help
me set up this disk as a dynamic disk. I gather that the "Drive is
controlled by the RAID BIOS" message is driving this behavior.
Ports 0 and 1 are a pair of 70 GB disks configured in a RAID 1 array.
These contain my OS, programs, and documents.
I do not want to mess this up. I do want to format the disk on Port 4
as a simple data storage disk (no RAID.)
Can anyone explain? I am stymied.
baumgrenze Tag: installed new dvd rewriter and it's not detected Tag: 330906
monitor problems
Has anyone experienced this fault on a CRT monitor - a 4 yr old LG
Studioworks.
Once or twice a session the display momentarily has a fit! The image dulls,
appears to zoom out of the screen and then contracts back to normal size and
brightness. This happens in a split second and there is also a 'crackle'.
It started happening once every several hours but the freqency is
increasing.
If this is a known but cheaply fixed fault fine. Otherwise I'm loathe to lay
out $X only to be told that it'll cost $Y to fix which might be a good part
of the cost of a new monitor.
F Tag: installed new dvd rewriter and it's not detected Tag: 330890
monitor problems
Has anyone experienced this fault on a CRT monitor - a 4 yr old LG
Studioworks.
Once or twice a session the display momentarily has a fit! The image dulls,
appears to zoom out of the screen and then contracts back to normal size and
brightness. This happens in a split second and there is also a 'crackle'.
It started happening once every several hours but the frequency is
increasing.
If this is a known but cheaply fixed fault fine. Otherwise I'm loathe to lay
out $X only to be told that it'll cost $Y to fix which might be a good part
of the cost of a new monitor.
F Tag: installed new dvd rewriter and it's not detected Tag: 330889
invisible SATA hard drive
A recently fitted SATA HD isn't showing up.
I have 4 SATA slots on my Gigabyte Duo GA-8I915P Duo Pro motherboard. 2
have a matching pair of Hitachi SATA HDs in a RAID configuration.
A few months ago I fitted a Panasonic DVD RW into one of the remaining
slots. It showed up and worked faultlessly immediately.
Recently I bought a Western Digital 400GB SATA HD, fitted it into a spare
bay and hooked it up. But it's not there.
During POST (which in spite of every attempt to pause it, flashes along at
the speed of light) no trace of it seems to appear. I think the DVD RW is
there and the 2 RAID drives do appear but not the WD drive. There's no sign
of it in BIOS either even after using the auto detect option.
What do I need to do to get this new drive up and running? If this isn't
the right group does anyone know of another or maybe a forum?
TIA
RoS Tag: installed new dvd rewriter and it's not detected Tag: 330888
$$$ on line hero $$$
you get mony! you want mony!!!!! us$ you see this web clike
here
www.mobilegalaxy.net.tc
www.football5.blogspot.com Tag: installed new dvd rewriter and it's not detected Tag: 330884
Lifecam VX 3000
I have a Lifecam VX 3000 that used to work with Windows XP but has stopped
working now. As soon as I try to make a video call, the camera freezes. I
have uninstalled and re-installed a number of times but it's always the same.
Can anyone come up with a solution. (I have even tried a Logitek camera, but
the same thing happens) Tag: installed new dvd rewriter and it's not detected Tag: 330883
Recover 500Gb of files
I want to recover files from a full external HD that are not available to
Windows XP any more. The only software I have tried (Recover my files) will
take 5 days, and the PC won't stay running that long. I would appreciate
any suggestions. Tag: installed new dvd rewriter and it's not detected Tag: 330874
Nvidia 9600GT Problem
I've posted my problem to a couple of support groups and so far I
haven't been able to solve my problem, at least not completely.
Recently, meaning a couple days ago I upgraded my PC's video card to a
Nvidia 9600GT series card from an ATI X1600. I am running a fully up to
date version of Windows XP Professional. I uninstalled the ATI drivers
and other related software before I switched cards. I then installed
the Nvidia Forceware software. I also reinstalled the Viewsonic driver
for my VP2330 flat panel display. Viewsonic recommends for best results
to run the monitor at a resolution of 1920 by 1200. I did just that
when using the ATI video card although it wouldn't work in DVI-D mode.
Now when I set the resolution to 1920 by 1200 the font rendering has
problems. Rather than having black text, the text displays in a
multitude of colors. This is also true for text displayed in white, or
any other color that I've tried for that matter. Activating cleartext
has helped somewhat making text more legible, but I haven't been able to
fix the text color problem. If I run the monitor at 1600 by 1200
everything works as it should. Has anyone come across this sort of
problem before? And can it be fixed? Or is this a compatibility issue?
Thanks Tag: installed new dvd rewriter and it's not detected Tag: 330862
No sound
Tried to play music on my computer (Win XP SP2) but cannot seem to hear any
sound through my Microphone even though the Windows Media Player is playing
the music.
I have a sound card which is listed in the Device Mangager. I've also
installed a sound driver..but still cannot hear anything.
Where could the problem be??? Tag: installed new dvd rewriter and it's not detected Tag: 330861
How can I tell if my computer's motherboard is DDR2 compatible?
I want to upgrade the RAM in my computer to make it faster, and I am
looking at buying two of these: http://www.jr.com/JRProductPage.process?Product=4142181
It says on that page, "DDR2 is the next generation of DDR memory. DDR2
memory features faster speeds, greater bandwidth, lower power
consumption and enhanced thermal performance. Boost the performance of
your PC. PNY memory Upgrades will prove to be an outstanding value now
and in the future. Although DDR2 modules are the same physical
dimension as DDR modules, the plug-in connector configuration is
different and as such DDR2 modules are NOT compatible with PCS
requiring DDR modules."
How can I tell if my computer will work with this? The computer is a
Dell Dimension 4700C bought in December 2004, and currently has 1GB of
RAM. I would prefer not to take my computer apart to check this. Tag: installed new dvd rewriter and it's not detected Tag: 330859
Strange Keyboard Problem:
I have a Dell Dimension 8200 with XP SP2
The problem I have is this: sometimes like on Yahoo or MSN when I
click on something and then click backspace it doesn't do it. I see it
cycling but then it just sits. I've noticed it does this on other
sites as well but not all. In most cases when I click the backspace
button or key it does so but in these other instances I have to click
it twice and sometime 3 times. I shouldn't have to do this. When I
click on the backspace key or button it should immediately backspace
without me having to repeat it. Does anyone know why its doing this or
can offer any suggestions?
Thanks,
Robert Tag: installed new dvd rewriter and it's not detected Tag: 330855
Task Manager
Does anyone know how task manager monitors CPU
performance?
In the CPU usage area, what does a second "red" line
graph indicate? Whenever the red line ascends, the
green line of the same CPU descends correspondingly.
(The red line only appears on an E8400 chip - 45nm)
TIA, Ed Tag: installed new dvd rewriter and it's not detected Tag: 330851
MS Installer Cleanup utility
I'm trying to uninstall some software (Palm Desktop), which gave an msi
error and failed to install. Palm's advice to me was to install the
Windows Installer CleanUp Utility and use this to erase leftover
registry entries from a previously deleted version of their software. I
obtained the CleanUp Utility from the MS site and tried to run it. My
problem is that this utility fails to install or run and gives an error
message:
Error: "ActiveX component cant create object: 'scripting.fileSystemObject"
Code: 800A01AD
Source: Microsoft VBscript runtime error
Any ideas apreciated Tag: installed new dvd rewriter and it's not detected Tag: 330847
display driver problem
Hi all,
I am using a hitachi LCD-Flat display, intel- PXA255 processor with WINCE 5.0 running on it. I am getting a side effect in the display i.e a very light projection of red color towards the right side of the icon till the end of screen. I had changed the RGB settings but no effect. If please any one can tell me any functions relating to this effect, or is this a total HARDWARE issue.
regards,
ssr Tag: installed new dvd rewriter and it's not detected Tag: 330843
AutoRun May Not Work After First Insert a "usb flash drive like a CD ROM"
Hi
We want to develope a usb flash drive,just like a CD ROM,which contains
some software can autorun when being plugged.But we find a strange
phenomena:
After insert our usb flash drive into a computer with a fresh
installation of Windows 2000/Windows XP/Windows Vista for the first time,
the AutoRun functionality of our computer may not work. However, after
unplugging and plugging the device into the computer, the AutoRun
functionality may start to work again. After that this phenomena does not
occur again.
I hope someone can explain it, Thanks for answering.
Sincerely,
Carter Tag: installed new dvd rewriter and it's not detected Tag: 330838
Bluetooth icon missing from control panel
I have a Dell Latitude D610 with a built in bluetooth adapter. When I
do a fresh OS install on other similar machines, I am able to see the
Bluetooth icon in the control panel. I believe this machine used to
have the Toshiba Bluetooth stack on it. However it has since been
removed. I can confirm that there are no unknown devices or devices
with error in the device manager. I tried running
C:\windows\system32\bthprops.cpl and nothing happens. I can also
confirm that c:\windows\inf\bth.inf exists and is the original (SP2)
version. There is also a string value in
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run called
"BluetoothAuthenticationAgent" that has the value "rundll32.exe
bthprops.cpl,,BluetoothAuthenticationAgent".
Given all of the above, does anyone have any idea how to force the
bluetooth icon in the control panel to show up? Tag: installed new dvd rewriter and it's not detected Tag: 330824
Mouse install
I have tried several times to install a mouse on my laptop xp system, and the
installer always gives the some message, can not install this hardware?
does any body know whats ging on? this would be the same with a laser
wireless or optical?
Thanks
--
tommy97006 Tag: installed new dvd rewriter and it's not detected Tag: 330820
Help with 6000 Wireless Keyboard
Hello,
I'm struggling with a problem I have seen online elsewhere, but no
solutions.... I have this wonderful keyboard and mouse, mouse works,
kbd doesn't. I have already tried:
Changing channel on receiver
Hitting the connect button on the keyboard
Replacing the batteries
Moving the reciever around.
I have downloaded the lastest driver. The strange thing is, the dialog
box in Intellipoint Pro shows full signal strength and battery power,
even when I unplug the batteries!!!
HELP!
Many thanks,
Irv Tag: installed new dvd rewriter and it's not detected Tag: 330818
Configuration problem or defect drive?
I already tried to get help on this but wasn't successful - so this is my
second shot. My first attempt was a month ago and I did a lot of reading
since - equally unsuccessful.
The Problem: My Asus DRW2014L1T won't open it's door for me. It also doesn't
recognize any CD's I 'force' into it (emergency open). So far this sounds
like a hardware problem. There are some aspects though that make me doubt
that: during boot my other DVD drive is correctly displayed as PATA (Pioneer
DVR 112) but no mention of the Asus (no mention of the SATA HDD either by the
way - so maybe that's normal?). In 'My Computer' the drive is listed as
'CD-Rom' drive. In 'Device Manager' it is listed under the correct name and
as properly working. In 'Computer Management/Disk Management' it's the same
as in 'Device Manager' - the Pioneer is recognized as DVD, the Asus is listed
as CD-Rom drive. Under 'IDE ATA/ATAPI controllers' I have 9 listings (is that
normal - I thought I only had 3 drives in total and although there was one
step during installation of my broadband modem installing a 'CD-Rom device'
that only makes 4???):
Intel ICH9 2 port Serial ATA Storage Controller 2 - 2926
Intel ICH9 4 port Serial ATA Storage Controller 1 - 2920
Primary IDE Channel (Details: PCIIDE\IDECHANNEL\4&23C3F348&0&0)
Primary IDE Channel (Details: PCIIDE\IDECHANNEL\4&3A09A70B&0&0)
Primary IDE Channel (Details: PCIIDE\IDECHANNEL\5&1F7D41A9&0&0)
Secondary IDE Channel (Details: PCIIDE\IDECHANNEL\4&23C3F348&0&1)
Secondary IDE Channel (Details: PCIIDE\IDECHANNEL\4&3A09A70B&0&1)
Secondary IDE Channel (Details: PCIIDE\IDECHANNEL\5&1F7D41A9&0&1)
Standard Dual Channel PCI IDE Controller (Details:
PCI\VEN_11AB&DEV_6121&SUBSYS_5442808086&REV_B2\4&2DA1E264&0&00E4)
If I disconnect the Asus the boot process is a lot faster, with the Asus
attached boot goes through a couple of 'please hold or call back later'
phases, particularly when the drives are being 'detected' (or not).
Any clue what's going on? Is it just the drive itself (I hope not - the
dealer is 800 miles away and I won't get there again before July)?
System Info: Windows XP Pro 2, Intel DX38BT board, Intel Core2 2,66, NVidia
XT6800, plenty of free space on the harddrive, DDR3 1333 1GH RAM, no viruses.
Thanks in advance for any help. Tag: installed new dvd rewriter and it's not detected Tag: 330813
Startup error The Creative Service for CDROM Access service failed to start due to the following error
The Creative Service for CDROM Access service failed to start due to the
following error:
The system cannot find the file specified.
======
If I right-click one the Event 7000 in the event viewer I get the above
message.
How can I find out where it is looking for the file?
also I have a few events that produce the following:
The time provider NtpClient is configured to acquire time from one or more
time sources, however none of the sources are currently accessible. No
attempt to contact a source will be made for 15 minutes. NtpClient has no
source of accurate time.
Is that a clue something is not right or should I ignore it?
Thanks for any help, especially with the first question Tag: installed new dvd rewriter and it's not detected Tag: 330805
How to diagnose QueryDosDevice Failed error
I've started to get the "QueryDosDevice Failed. Insufficient system
resources exist to complete the requested service" pop-up rather
consistantly.
Is there a way to find out which requested service is causing the problem?
The last time i had this problem my Profile became corrupted. Windows
somehow fixed the Profile, and i stopped getting the error message.
This time however the Profile is acting strangly, some programs wont run,
for example iTunes complains about not being able to verify my Audio
drivers, and stops working.
Something else i've notice is that Task Manager is "dimmed" and unavailable
for use. Also when i type CTRL-Alt-Del only the Cancel button is available.
The HD i am using is fairly new, about 6 months. I migrated from a smaller
ATA drive to a Segate 250 SATA drive. I use the migration tool provided with
the new drive and it worked perfectly i didn't lose any data. I am
mentioning this because i don't know if this is related to my
"QueryDosDevice Failed" problem.
I setup a new account and profile, and noticed that as soon as i tried to
use iTunes i got the Audio errors, and the "QueryDosDevice Failed" pop-up
started.
So, is there a way for me to diagnose and fix this problem?
Thanks all
Bob Tag: installed new dvd rewriter and it's not detected Tag: 330789
Computer hardware answers what you looking for...
You need Informations about hardware, about computers, about
configurations...? try to find your answer on...
http://comp-hardware.blogspot.com/ Tag: installed new dvd rewriter and it's not detected Tag: 330785
CD/CVDR
I have a IDE\CDROM TSST CORP CD/DVDW TS-H552L 0614 OEM HP that will not
recognize 16X media. Samsung says that TS-H552L does not exist. Any help
would be appreciated.
Than you Tag: installed new dvd rewriter and it's not detected Tag: 330773
Lines on print?
Win XP/SP2, HP Deskjet 840C, newest drivers.
When I print say a picture there are thin horizontal white lines about 1/4"
apart the whole way down.
This is even after changing the colour cartridge to an original HP and
properly aligning it via HP Toolbox.
Is this serviceable or is it a sign of wear in the rollers or moving parts?
Would like to get it going for another while especially since I've just paid
£21.99 for a new cartridge.
Replies appreciated.
--
Kenny Cargill Tag: installed new dvd rewriter and it's not detected Tag: 330767
Wholesale AAA Tissot T-Navigator Black Mens Watch T30.1.485.52
Wholesale AAA Tissot T-Navigator Black Mens Watch T30.1.485.52 Replica
Price Of Each Replica Watche from www.wholesale-watches.org is less
than $100, all waches are of AAA quality.
Wholesale Tissot T-Navigator Black Mens Watch T30.1.485.52 :
http://www.wholesale-watches.org/wristwatch-7130.html
Wholesale Replica Watches : http://www.wholesale-watches.org/
Buy the Lower price Tissot T-Navigator Black Mens Watch T30.1.485.52
in toppest Replica . www.wholesale-watches.org helps you to save
money! tissot-watch-T30.1.485.52 , Tissot T-Navigator Black Mens Watch
T30.1.485.52 , Replia , Cheap , Fake , imitation Tissot T-Navigator
Black Mens Watch T30.1.485.52, Tissot Watches
Tissot T-Navigator Black Mens Watch T30.1.485.52 Information :
Brand : Tissot Watches (http://www.wholesale-watches.org/
tissot-watches.html )
Gender :
Model : tissot-watch-T30.1.485.52
Case Material :
Case Diameter :
Dial Color :
Bezel :
Movement :
Clasp :
Water Resistant :
Crystal :
Our Price : http://www.wholesale-watches.org/wristwatch-7130.html
Availability: In StockTissot T-Navigator Black Mens Watch
T30.1.485.52Stainless steel case and bracelet. Black dial. Scratch
resistant sapphire crystal. Hidden push button deployment clasp.
Quartz movement. Water resistant at 30 meters (100 feet). Tissot T-
Navigator Black Mens Watch T30.1.485.52Tissot T-Navigator Black Mens
Watch T30.1.485.52 is brand new, join thousands of satisfied customers
and buy your Tissot T-Navigator Black Mens Watch T30.1.485.52 with
total satisfaction . A Weholesale-watches.org 30 Day Money Back
Guarantee is included with every Tissot T-Navigator Black Mens Watch
T30.1.485.52 for secure, risk-free online shopping. Weholesale-
watches.org does not charge sales tax for the Tissot T-Navigator Black
Mens Watch T30.1.485.52, unless shipped within New York State.
Weholesale-watches.org is rated 5 stars on the Yahoo! network.
Tissot T-Navigator Black Mens Watch T30.1.485.52 in Tissot Watches
series won't be wholesale in China Replica Watches Wholesale, If you
want to order, please contact with us at wholesalewatch@hotmail.com
Thank you for choosing www.wholesale-watches.org as your reliable
dealer of quality waches including Tissot T-Navigator Black Mens Watch
T30.1.485.52 . we guarantee every watch you receive will be exact
watch you ordered. Each watch sold enjoy one year Warranty for free
repair. Every order from aaa-replica-watches is shipped via EMS, the
customer is responsible for the shipping fee on the first order, but
since the second watch you buy from our site, the shipping cost is
free. Please note that If the total amount of payment is over
$600(USD),TISSOT T-NAVIGATOR BLACK MENS WATCH T30.1.485.52, the
customer is required to contact our customer service before sending
the money in case failed payment. If you have any other questions
please check our other pages or feel free to email us by
wholesalewatch@hotmail.com. Cheapest tissot-watch-T30.1.485.52
The Same Tissot Watches Series :
Tissot Quadrato Mens Watch T0055171629700 :
http://www.wholesale-watches.org/wristwatch-7131.html
Tissot Quadrato Mens Watch T0055171105700 :
http://www.wholesale-watches.org/wristwatch-7132.html
Tissot Quadrato Mens Watch T005.517.11.047.00 :
http://www.wholesale-watches.org/wristwatch-7133.html
Tissot Quadrato Mens Watch T005.517.11.277.00 :
http://www.wholesale-watches.org/wristwatch-7134.html
Tissot Quadrato Mens Watch T005.510.17.277.00 :
http://www.wholesale-watches.org/wristwatch-7135.html
Tissot Quadrato Mens Watch T005.517.17.277.00 :
http://www.wholesale-watches.org/wristwatch-7136.html
Tissot Quadrato Mens Watch T005.510.16.267.00 :
http://www.wholesale-watches.org/wristwatch-7137.html
Tissot T-Tracx Mens Watch T010.417.17.031.01 :
http://www.wholesale-watches.org/wristwatch-7138.html
Tissot T-Tracx Mens Watch T010.417.17.031.03 :
http://www.wholesale-watches.org/wristwatch-7139.html
Tissot T-Tracx Mens Watch T010.417.17.031.02 :
http://www.wholesale-watches.org/wristwatch-7140.html
cheap ,lowest price , Wholesale Best Tissot T-Navigator Black Mens
Watch T30.1.485.52 Tag: installed new dvd rewriter and it's not detected Tag: 330763
Wholesale AAA Gucci 8905 Series Ladies Watch 28935 Replica
Wholesale AAA Gucci 8905 Series Ladies Watch 28935 Replica
Price Of Each Replica Watche from www.wholesale-watches.org is less
than $100, all waches are of AAA quality.
Wholesale Gucci 8905 Series Ladies Watch 28935 :
http://www.wholesale-watches.org/wristwatch-4179.html
Wholesale Replica Watches : http://www.wholesale-watches.org/
Buy the Lower price Gucci 8905 Series Ladies Watch 28935 in toppest
Replica . www.wholesale-watches.org helps you to save money!
Gucci-28935 , Gucci 8905 Series Ladies Watch 28935 , Replia , Cheap ,
Fake , imitation Gucci 8905 Series Ladies Watch 28935, Gucci Watches
Gucci 8905 Series Ladies Watch 28935 Information :
Brand : Gucci Watches (http://www.wholesale-watches.org/
gucci-watches.html )
Gender :
Model : Gucci-28935
Case Material :
Case Diameter :
Dial Color :
Bezel :
Movement :
Clasp :
Water Resistant :
Crystal :
Our Price : http://www.wholesale-watches.org/wristwatch-4179.html
Availability: In StockGucci 8905 Series Ladies Watch 28935Stainless
steel case and bracelet with a black dial. Swiss percision battery
operated quartz movement. 30 meters / 100 Feet Water Resistant Gucci
8905 Series Ladies Watch 28935Gucci 8905 Series Ladies Watch 28935 is
brand new, join thousands of satisfied customers and buy your Gucci
8905 Series Ladies Watch 28935 with total satisfaction . A Weholesale-
watches.org 30 Day Money Back Guarantee is included with every Gucci
8905 Series Ladies Watch 28935 for secure, risk-free online shopping.
Weholesale-watches.org does not charge sales tax for the Gucci 8905
Series Ladies Watch 28935, unless shipped within New York State.
Weholesale-watches.org is rated 5 stars on the Yahoo! network.
Gucci 8905 Series Ladies Watch 28935 in Gucci Watches series won't be
wholesale in China Replica Watches Wholesale, If you want to order,
please contact with us at wholesalewatch@hotmail.com
Thank you for choosing www.wholesale-watches.org as your reliable
dealer of quality waches including Gucci 8905 Series Ladies Watch
28935 . we guarantee every watch you receive will be exact watch you
ordered. Each watch sold enjoy one year Warranty for free repair.
Every order from aaa-replica-watches is shipped via EMS, the customer
is responsible for the shipping fee on the first order, but since the
second watch you buy from our site, the shipping cost is free. Please
note that If the total amount of payment is over $600(USD),GUCCI 8905
SERIES LADIES WATCH 28935, the customer is required to contact our
customer service before sending the money in case failed payment. If
you have any other questions please check our other pages or feel free
to email us by wholesalewatch@hotmail.com. Cheapest Gucci-28935
The Same Gucci Watches Series :
Gucci 8905 Series Mens Watch 18976 :
http://www.wholesale-watches.org/wristwatch-4180.html
Gucci 8905 Series Mens Watch 18965 :
http://www.wholesale-watches.org/wristwatch-4181.html
Gucci G-Watch 108G Silver Flower Dial Ladies Watch YA108502 :
http://www.wholesale-watches.org/wristwatch-4182.html
Gucci G-Watch 108G Black Flower Dial Ladies Watch YA108501 :
http://www.wholesale-watches.org/wristwatch-4183.html
Gucci Pantheon Mens Watch YA115202 :
http://www.wholesale-watches.org/wristwatch-4184.html
Gucci Pantheon Mens Watch YA115201 :
http://www.wholesale-watches.org/wristwatch-4185.html
Gucci 7905 Series Mini Ladies Watch YA079607 :
http://www.wholesale-watches.org/wristwatch-4186.html
Gucci 7900 Series Ladies Watch 27935 :
http://www.wholesale-watches.org/wristwatch-4187.html
Gucci 5200 Series Womens Watch 25230 :
http://www.wholesale-watches.org/wristwatch-4188.html
cheap ,lowest price , Wholesale Best Gucci 8905 Series Ladies Watch
28935 Tag: installed new dvd rewriter and it's not detected Tag: 330762
Needed --- Recommendation on Trackball !
Hi, all !
I am setting up a computer lab for the disabled. We are looking for
equipments that might aid the disabled (mainly those who are not that
good in movement), and one of the things we are planning to get them
is trackball.
There are many types of trackballs available, unfortunately most are
made for the able-body people. I am looking for something that can be
used by the disabled with ease.
Our objective is that the trackball must be big enough, and easy
enough to be used.
One of the things we have found is the BIGTRACK trackball made by
infogrip ( www.infogrip.com/product_view.asp?RecordNumber=98 )
I want to know if there are other types of trackball similar or better
than the BIGTRACK that I list above?
If you have any experience on which type of trackball that will be
easy for the disabled, please share with us.
Thank you all in advance !!
Sincerely,
Lee Tag: installed new dvd rewriter and it's not detected Tag: 330752
"USB Sound Device"
The drivers for this device are not installed. (Code 28)
I'm trying to attach a McLelland USB Preamp to my desktop PC. The desktop
PC is running fully patched Windows XP Pro SP2. This device is supposed to
come up as "USB Sound Device" which it does in Add Hardware Wizard. It is
also supposed to use the defauilt USB drivers included with Windows, but the
Add Hardware Wizard can't find drivers for it.
My laptop Windows XP Media Center finds the preamp as a USB Audio Device and
it works fine there. Tag: installed new dvd rewriter and it's not detected Tag: 330751
Re: Dead Computer - Power Supply or Motherboard?
P.S.: By dead, I mean completely dead - nothing happens (no lights, no
fans, no drives running, etc).
Bill in Co. wrote:
> Is there any simple test to eliminate one of those possibilities?
>
> I have read that it is possible to check the power supply by temporarily
> shorting two pins together, but I don't know which two pins, and I don't
> know if that will work without any load on the power supply. I do have
> a
> voltmeter, however. Tag: installed new dvd rewriter and it's not detected Tag: 330733
Dead Computer - Power Supply or Motherboard?
Is there any simple test to eliminate one of those possibilities?
I have read that it is possible to check the power supply by temporarily
shorting two pins together, but I don't know which two pins, and I don't
know if that will work without any load on the power supply. I do have a
voltmeter, however. Tag: installed new dvd rewriter and it's not detected Tag: 330732
Drive not ready
Whenever I boot XP Home SP2 I receive this message:
Windows - Drive Not Ready - in message box header.
Exception Processing Message c00000a3 Parameters 75b6bf9c 4 75b6bf9c 4
75b6bf9c 75b6bf9c - message line
"Cancel" Try Again" "Continue" - Options
I take "Continue" and systems continues booting and don't seem to have any
operating issues.
Any suggestions or recommendations?
Thank you,
JHG Tag: installed new dvd rewriter and it's not detected Tag: 330731
is this a bad hard-drive?
HD is a Seagate 40GB ATA internal drive (model # ST340014A). I'm replacing a
failed Seagate (same model). Put it in a working PC, saw it in Disk Manager
and formatted it in NTFS. Once that was complete, the word "Healthy" was
seen in DM.
Plugged it into the old PC so I could boot to CD and reinstall the OS, but I
see no messages on the monitor. The video on/off light just slowly blinks
on and off like it's not getting a signal. Checked all the cables and they
seem to be firmly seated. The HD spins up, but it's not as loud/active as I
expect it to be. Plus, when I try a Ctrl-Alt-Delete after awhile, I hear
two sharp noises/beeps from the HD.
I'm not a HW guy at all, so don't know what the significance of this is, if
any.
If none, any suiggestions on what to try next?
--
Mike Webb
Platte River Whooping Crane Maintenance Trust, Inc.
a conservation non-profit (501 (c)(3)) organization
Wood River, NE Tag: installed new dvd rewriter and it's not detected Tag: 330712
bad hard drive? - WinXP Pro SP2
HD is a Seagate 40GB ATA internal drive (model # ST340014A). I'm replacing a
failed Seagate (same model). Put it in a working PC, saw it in Disk Manager
and formatted it in NTFS. Once that was complete, the word "Healthy" was
seen in DM.
Plugged it into the old PC so I could boot to CD and reinstall the OS, but I
see no messages on the monitor. The video on/off light just slowly blinks
on and off like it's not getting a signal. Checked all the cables and they
seem to be firmly seated. The HD spins up, but it's not as loud/active as I
expect it to be. Plus, when I try a Ctrl-Alt-Delete after awhile, I hear
two sharp noises/beeps from the HD.
I'm not a HW guy at all, so don't know what the significance of this is, if
any.
If none, any suiggestions on what to try next?
--
Mike Webb
Platte River Whooping Crane Maintenance Trust, Inc.
a conservation non-profit (501 (c)(3)) organization
Wood River, NE Tag: installed new dvd rewriter and it's not detected Tag: 330711
XP sees MiniDV camcorder via firewire but capture software cannot
I recently got a new mobo and system (see specs below). I added my old
Pinnacle Systems GmbH DV 1394 (PCI firewire card, circa 2001). I
connected my Sony TRV17 MiniDV camcorder into the firewire port.
Windows XP sees the new device and correctly identifies it as a Sony
DV camcorder. This is confirmed in the Device Manager, where the DV
camcorder is listed in the in the Imaging Devices section underneath
my Logitech webcam. So far so good.
When I run AMCap or WinDV to capture the video (I tried both), it
identifies the device in the list of possible capture devices (that
is, it sees my webcam and my MiniDV camcorder).
However, when I change the active device from the drop-down menu from
webcam to camcorder, the status message says "Initializing..." and the
software freezes. When I play the video on my camcorder, no
corresponding image ever appears on the screen. (FWIW, I cannot even
shut down WinDV in the task manager until I turn off the camcorder.)
So, in conclusion, XP says the hardware is ready to use. It correctly
identifies it. But the capture software is having a problem
communicating with the camera.
(Btw, I tried connecting the camcorder into each of the two firewire
ports, I restarted the PC between attempts, I refreshed the hardware
device list. I haven't yet tested the camcorder on another computer
yet.)
1. Is there any other capture software you recommend?
2. Could the webcam be messing things up?
3. Is the mobo somehow messing things up?
4. Is there a new MiniDV driver I need to install? I remember years
ago there was something about the MS driver versus the Texas
Instruments driver? Is this somehow related?
MY SOFTWARE
Windows XP, SP2, fully up-to-date with all the updates
MY HARDWARE
* Intel Core 2 Duo E4400 2.00GHz Dual-Core 64-bit Processor, 2x1.0 MB
Cache, 800FSB, s775, Code Named: Allendale, EM64T, Retail Box, Heat
Sink & Fan, BX80557E4400
* ASUS P5B Motherboard, Intel CPU Support: (Core 2 Duo/Quad, Pentium 4/
D, Celeron), Intel P965/ICH8 Chipset, Socket 775, Ultra Quiet - No Fan/
Heatsink Only, 533/800/1066 FSB Support, 4xDIMM (8GB Max), Dual
Channel DDR2-800 (Effective 1.60 GHz), 4xSerial ATA (SATA300), 1xPCI-E
x16, 3xPCI-E x1, 3xPCI (32bit 33Mhz), JMicron JMB363 IDE Controller:
(1xATA133, 1xSATA300 & 1xeSATA300), Realtek PCI-E 10/100/1000
(Gigabit) Network, ADI High Definition 8-channel Audio w/SPDIF, up to
10xUSB 2.0
* Kingston Value RAM (KVR800D2N5/1G), 1.0 GB PC6400 DDR2 (800 MHz), CL
5.0
* Antec EarthWatts 430 (EA430), 430 Watt ATX12V 2.0 Power Supply, 24-
pin Main Power Connector w/ Detachable 4-pin Section, Dual +12V
Outputs (Rails), Intel & AMD Cetified, 1x80mm Fan, 1 x PCI-E & 4 x
SATA Power Connectors
* Seagate Barracuda 7200.10 400 GB Hard Drive (ST3400620AS), Serial
ATA 2.5, SATA300 (3Gb/s), NCQ, ? ms, 7200 RPM, 16 MB Cache, OEM
* Pinnacle Systems GmbH DV 1394 (PCI firewire card) Tag: installed new dvd rewriter and it's not detected Tag: 330693
Copying DVD contents to HD painfully slow...
Hi,
I've got relatively current gear (Seagate & WD drives, and a Plextor DVDR
drive) but I'm finding the 90 minutes it takes to dump the content of a DVD
onto my HD unnecessarily excessive. Is it supposed to take that long to copy
3-4 gigs worth of raw data to a HD? The target drive isn't even the one
Windows is installed on, which is supposed to help speed-wise.
What could be causing this, and how could I tweak WinXP (fully patched) into
speeding this up? I've got 4GB of ram (even though 2 are being wasted most
of the time).
Thanks. Tag: installed new dvd rewriter and it's not detected Tag: 330688
Windows XP Pro SP2 - 4GB RAM but Windows only shows 3 GB
Hi,
I have 2 Dell laptops with same hardawre configuration, 4 GB RAM and Windows
XP Pro SP2.
They have been bought in an interval of one month so BIOS is not exactly at
the same version.
On the oldest one, Windows correctly displays 4GB, for instance in task
manager when the most recent one only displays 3GB.
I precise hat winmsd displays that my RAM is 4 GB in both laptops.
Sorry if it is a FAQ but I didn't find the answer when I searched in this
forum.
Thank you for reading this message and thanks to those that can help to
solve this problem.
Michel Tag: installed new dvd rewriter and it's not detected Tag: 330685
About installation of Windows XP service pack2
i have vista bussiness edition on my laptop with SATA hard disk now i
want to install windows xp service pack 2.when i use xp service pack 2
cd to boot it does not shows the partion of the hard disk and after
pressing enter it shows RAM related error plz help me out??? Tag: installed new dvd rewriter and it's not detected Tag: 330683
just installed a dvd rewriter to replace a cd rewriter and the hardwear can
not be found. tried adding hard wear but still nothing. also the dvd rom went
missing
RE: installed new dvd rewriter and it's not detected by solidsnake204
solidsnake204
Mon Apr 28 12:29:01 PDT 2008
Is the drive shown on the POST boot-up screen? (The screen when your PC turns
on, if you have a picture of your PC manufacturer then you usually have to
press a button to see the POST screen (Usually TAB) )
"hairysam" wrote:
> just installed a dvd rewriter to replace a cd rewriter and the hardwear can
> not be found. tried adding hard wear but still nothing. also the dvd rom went
> missing
Re: installed new dvd rewriter and it's not detected by Farad'n
Farad'n
Mon Apr 28 15:53:26 PDT 2008
On Mon, 28 Apr 2008 10:33:01 -0700, hairysam
<hairysam@discussions.microsoft.com> wrote:
>just installed a dvd rewriter to replace a cd rewriter and the hardwear can
>not be found. tried adding hard wear but still nothing. also the dvd rom went
>missing
Everybody heard you when you posted this 14 minutes prior.