reg: hang of hdd or os

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Computer will not boot Hi, I have a HP Pavilion Notebook dv5157eu yesterday it was working fine today it will not boot up. It will boot to a options screen with the options Safe Mode, Safe mode with networking, Command Prompt ect but no matter which option I try and I've tried all of them it will boot as far as loading drivers but stops at a file called mup.sys then it will just auto reboot again to the above mentioned options. I do not have recovery disks but can access the recovery partition using f11 but am told that if I proceed all data will be lost. I have tried alt+d to access the command prompt from the recovery partition and can but it says x:\minint\system32> I tried C: but get the message The volume does not contain a recognized file system. please make sure that all required file system drivers are loaded and that the volume is not corrupted. Please can anyone advise me on what I can do to try to solve this problem... thankyou Tag: reg: hang of hdd or os Tag: 331386
  - 2
    - Processor Bus? I saw this Dell PC on Tesco Direct, for the price I thought the specs were very good. I sent the page to my friend, who said it is good for the price, but the low processor bus means that the computer wont be as fast as I think. Processor Bus: 800 MHZ My friend said that this is low, is that true? Full system specs: http://direct.tesco.com/q/R.203-4621.aspx Tag: reg: hang of hdd or os Tag: 331383
  - 3
    - started with "blue screen" ended up with "missing system32\hal.dll Hi folks... I'm praying somone can assist me as I've been waiting to hear back from Microsoft on this as it started (when I noticed - my daughter's computer) when trying to run updates from Microsoft. Her system is older, running XP Pro and there isn't much on it believe it or not. AVG is the anti-virus and I've also tried running some registry scans. No avail, but cleaned a few things up. Mostly having to run in Safe Mode and Safe Mode w/Networking, yet will still eventually end up getting that blue screen and many times re-looping and getting stuck & F8 doesn't always work either. Again, this is my daughterâ??s computer, and I believe this started about a week or so ago. She finally told me a few days ago and when I started taking a look at her system, this is all new, not past issues Iâ??ve experienced. 1. The first thing I tried to do was to run a scan on her system to see if there were virus, etc. 2. Then I tried to run a windows update and thatâ??s when I personally encountered the first blue screen of manyâ?¦ 3. I had already attempted many times to Use the â??Last Known Good Configurationâ?? to no avail, a few times the system couldnâ??t even get to running Windows without having returned directly to the blue screen. 4. Then I was able to use the Safe Mode with Networking, tried running Windows Update that way, didnâ??t work. Multiple attempts each ending in Blue Screen 5. I noticed that a message finally gave me something about a Driver issue, so went to Device Manager, and updated/reinstalled drivers a display screen and a multimedia device (neither of which I am familiar), but then the Device Mgr was clear. 6. Then attempted to run Windows update and it did actually download the Visualization Tool & Installed, thought I was actually getting somewhereâ?¦ But then after it asked me to continue on with scanning for updates, I was back to the blue screen and it proceeded to no longer be able to start Windows again, just re-routing back to Blue Screen. 7. Last Known Good Configuration again, didnâ??t work. I do have screen shots of the blue screens it gives, but the error codes are of no help as the four it gives me, always change. I've finally turned the damn thing off as it was just re-looping to blue screen and couldn't load windows, so after 3 days of tyring to figure it out, I've given up.... Lastly, apparently my daughter turned the computer on, and now all it shows is a black screen with the "missing system32\hal.dll" file. Now I've seen this when I got a brand new system running both Mac & OS systems, when I loaded windows. I figured out a work around for it on the Mac, but this system only runs Windows, so not sure what to do from here with it... She has some things on her system that she's hoping I don't have to do a fresh install so any suggestions are tremendously appreciated. Please let me know what further info I can provide to be of assistance. Thanks so much, Sunny Tag: reg: hang of hdd or os Tag: 331382
  - 4
    - Hard disk diagnostic tool Hi All, Could you recommend a 3rd party hard disk diagnostic tool? Thanks, Joe Tag: reg: hang of hdd or os Tag: 331378
  - 5
    - crossover couplerr test I have an RJ45 coupler which is supposed to be a crossover one, but it doesn't seem to work. Can I test it by adding a crossover cable in the chain, so that the double crossing results in a standard connection?. Tag: reg: hang of hdd or os Tag: 331375
  - 6
    - Plextor PX- 712A I have a Plextor PX-712A about 4 years old it plays video OK but the sound has been getting choppy it does the same thing on audio files that I have burned on it. I am wondering if any one has any idea about what is going on. My guess is it is something to do with the Read head but, I'm not a hardware guy. I have monkeyed around with Plextools to see if the settings were screwed up but, that does not seem to be the issue. Thanks for any help--I will try and find my local hardware guru but, I think he is out of business--bummer. -- Rick Fargo, ND N 46°53'251" W 096°48'279" Remember the USS Liberty http://www.ussliberty.org/ Tag: reg: hang of hdd or os Tag: 331372
  - 7
    - Bluetooth Problem My XP Pro laptop comes with a built-in Broadcom BT device and driver. To be able to synch my Blackberry, I need to use the Windows driver instead. i have two problems: 1) I cannot remove the Broadcom - it is not listed under add/remove software and when I try to do it in device manager, only one of the two Broadcom BT items listed under BT have a remove option AND when I remove the one that I can remove, the Scand For Hardware Changes option automatically reinstalls the Broadcom software. 2) I cannot find a download for the Windows BT driver. Very annoying! Tag: reg: hang of hdd or os Tag: 331368
  - 8
    - Beginner's Question: Adding a 2nd Monitor to my XP System Hello I just got a new 22" monitor, which my Nvidia Quadro FX3000 is able to drive without problems (I'm not a gamer - just regular office type applications user). Instead of eBaying my old 17" monitor, I thought maybe I can use it to increase my monitor real estates. The FX3000 video card comes with two DVI ports, so I hooked up the old screen to the second DVI port on the FX3000, but everything just slowed down to a crawl, obviously the card can't handle 2 monitors. Do you think installing a second PCI video card would solve the problem? I don't have any experience building systems so advice is appreciated. Also, would I need to buy any special software for the two video cards to work together? Thanks. Tag: reg: hang of hdd or os Tag: 331362
  - 9
    - Defragment flash drive on Vista XP allows me to defragment drives other than my hard drive. I am unable to find that capability on my Vista. Is it available and how would I access it. Thanks. url:http://www.ureader.com/gp/1279-1.aspx Tag: reg: hang of hdd or os Tag: 331349
  - 10
    - 1000 gb hdd only recognizes 132 gb I recently purchased a samsung spinpoint 1000 gb hdd (HD 103UJ) as a replacement drive for the current system. Went thru normal windows xp pro installation process and the drive seemed to be set up fine. But only 132 gb are being shown for volume C. Device Manager shows capacity 954 gb, Unallocated Space 823gb. ('my computer' shows 'local disk c' total size 127 gb). How can I go about using the total drive Tag: reg: hang of hdd or os Tag: 331342
  - 11
    - pci pnp function does not work anymore I was trying to install a modem in a Shuttle Xps computer, but it did not want to connect to the dial-up site. So I installed a second one that did not work well in the computer. But installing the third one in the same slot (there is only one pci slot in this computer) did not get recognized. And now it does not recognize any pnp cards in this slot. What can I do? Is it something in the services, or does it need something else to be done? Tag: reg: hang of hdd or os Tag: 331339
  - 12
    - Hardware conflict causes XP boot screen to hang I installed a Zonet ZUC2400 PCI card (USB + Firewire) and now Windows XP hangs when it gets to the Windows logo screen. I removed my Win-TV PVR-150 card and rebooted. Same deal. I then removed the Zonet card, rebooted (normally) and inserted the Zonet card while XP was turned on. XP identified the card and I was able to connect my camcorder and transfer video flawlessly. But when I restarted, Windows XP hangs (like before). MY SPECS * Motherboard and CPU: ASUS P5B Motherboard, Intel CPU Support: (Core 2 Duo/Quad, Pentium 4/D, Celeron), Intel P965/ICH8 Chipset, Socket 775 * Card: Zonet ZUC2400 (USB 2.0 + Firewire PCI Combo Card, VIA VT63-6 and VIA VT6214L listed on chips) OS: Windows XP SP2, fully up to date *ATI Radeon 9600 Is there something I need to install to make this work? Is the VIA chipset the culprit? A user at NewEgg.com said this Zonet ZUC2400 card works perfectly with the Asus P5B, so I don't understand. Tag: reg: hang of hdd or os Tag: 331338
  - 13
    - System Hang...problem is HDD or OS. Hi all, I have new Intel MotherBoard C2D 2.4 GHz Intel Processor with 2GB Ram, but IDE 40GB seagate HDD (old 2002). I install Windows XP SP2 in my system when i start my PC it boots normally but after some time (10-15 min) it get hang , it do nothing even ctrl + Alt + Del is also not works, i have only option to press restart button nothing else, every thing is new accept HDD still my OS is not working normally. i also have Samsung DVD W/R its works proper. it may be the problem of HDD, but what could be the problem ? and how can i resolve it??? Please Help me abt that Thanks Tag: reg: hang of hdd or os Tag: 331319
  - 14
    - Sound Card I believe that I may already know the answer to my question, but for a long time my sound would play fine for a while (during games, music etc.) then randomly start making unusual noises, which required me to close the game or media player. Now I cannot get any sound, and my system does not even recognize that I have a sound card. When I try to play music the system says that no sound card has been configured. I think that I just need to get a new sound card, but I am wondering if there is any way to fix this. (current sound was through the stock 'Conexant Audio' card). Thanks in advance for those willing to write back. The Shadow Tag: reg: hang of hdd or os Tag: 331309
  - 15
    - burner not reading disks I have a Memorex 510L DVD burner runing on XP Home, and it's now saying the drive is "not accessibleincorrect function. I notice that it's isted as DVD+-RAM in Device Manager but it's DVD-RW drive in My Computer. Acronis and lNTI Backup also see is a DVD RAM. Apparently some apps want it to use a DVD RAM disk. How do I get it back to the way it's supposed to be? Thanks for help.... Tag: reg: hang of hdd or os Tag: 331302
  - 16
    - Webcam stalls XP boot up I Have a Biostar K8M800 MB with an AMD Athlon processor that I just built. XP boots up perfectly and runs just fine, however, if I have my Microsoft Webcam plugged into my USB port when I boot up the computer, The boot up sequence gets as far as showing the Windows start up screen and never gets any farther than that. If I unplug the webcam and reboot, everything is fine. I can plug the webcam into the USB port once windows is running and I don't have any problems. It's only at startup. Any ideas as to what is causing this problem. Tag: reg: hang of hdd or os Tag: 331282
  - 17
    - Hard drive worked, but now is not formatted I have a multi IDE drive system. I powered down the system and unplugged a random hard drive, that was not the primary drive. I then plugged in a different hard drive that I wanted to format and partition to put into a different computer. This operation was successful. I powered down the system, removed the temporary hard drive and reinstalled the original drive back into the original position. When I restarted the machine, I receive a hard drive not formatted message. How do I get the machine to recognize the drive again with its original data as I have not deleted the data? Tag: reg: hang of hdd or os Tag: 331276
  - 18
    - i945PM laptop chipset, Dual Channel Mode, and unmatched pairs Before we start... Technical Data Sheet for i945-based chipsets --> http://www.intel.com/design/mobile/datashts/309219.htm. Specifically reference section 1.1.2 System Memory support for i945GM chipsets (the i945PM supports all i945GM features but without the integrated graphics). I just wanted to let you guys know that this chipset does indeed support dual channel even with unmatched pairs. I know most boards will only do dual channel mode if the voltage, speed, and capacities match however this one will do it even if the capacities don't match. I will assume that the other factors should still match. I used the following memory sticks... Slot 1: G.Skill F2-5300CL5D-4GBSA DDRII2GB PC2-5300 CL5-5-5-15 Slot 2: G.Skill F2-5300PHU2-2GBSA DDRII1GB PC2-5300 CL5-5-5-15 Slot one is a stick of 2GB from a 2x2GB matched set Slot two is a stick of 1GB from a 2x1GB matched set Therefore they are not meant to go together. They are spec for spec compatible however. They both run at 1.8v. Memtest86+ 2.01 passed and reported Dual Channel (Asynchronous). CpuZ is reporting Dual Channel mode. Information below is from a CpuZ register dump file. Chipset ------------------------------------------------------------------------------ Northbridge Intel i945PM rev. 03 Southbridge Intel 82801GHM (ICH7-M/U) rev. A1 Graphic Interface PCI-Express PCI-E Link Width x16 PCI-E Max Link Width x16 Memory Type DDR2 Memory Size 3072 MBytes Channels Dual Memory Frequency 332.9 MHz (1:2) CAS# 5.0 RAS# to CAS# 5 RAS# Precharge 5 Cycle Time (tRAS) 15 Bank Cycle Time (tRC) 21 Memory SPD ------------------------------------------------------------------------------ DIMM #1 General Memory type DDR2 Module format SO-DIMM Manufacturer (ID) G.Skill (7F7F7F7FCD000000) Size 2048 MBytes Max bandwidth PC2-5300 (333 MHz) Part number F2-5300CL5-2GBSA Attributes Number of banks 2 Data width 64 bits Correction None Nominal Voltage 1.80 Volts EPP no XMP no Timings table Frequency (MHz) 200 266 333 CAS# 3.0 4.0 5.0 RAS# to CAS# delay 3 4 5 RAS# Precharge 3 4 5 TRAS 9 12 15 TRC 12 16 20 DIMM #2 General Memory type DDR2 Module format SO-DIMM Manufacturer (ID) G.Skill (7F7F7F7FCD000000) Size 1024 MBytes Max bandwidth PC2-5300 (333 MHz) Part number F2-5300PHU1-1GBSA Attributes Number of banks 2 Data width 64 bits Correction None Nominal Voltage 1.80 Volts EPP no XMP no Timings table Frequency (MHz) 266 333 CAS# 4.0 5.0 RAS# to CAS# delay 4 5 RAS# Precharge 4 5 TRAS 12 15 TRC 16 20 So umm... yea. Sometimes the boards do not need matched pairs to do dual-channel mode. I know some people around here have stated that you require matched pairs for Dual Channel mode to work. -- Robert Pendell shinji@elite-systems.org "A perfect world is one of chaos." Thawte Web of Trust Notary CAcert Assurer Tag: reg: hang of hdd or os Tag: 331273
  - 19
    - USB External Hardware Can't Install Windows XP SP2 with 6 USB2 ports (2 ports already connected for other devices) I have WD My Book and trying to install with my desktop computer. When I connect this HD device as instructed, Found New Hardware Wizard pops up (Hardware found: My Book) and I select "Install the software automatically" But it cannot install this hardware. I finds ?MyBook in Device Manager but no drivers installed. Disk management shows no drive letter. Looking for solution! Tag: reg: hang of hdd or os Tag: 331245
  - 20
    - cannot load drivers Trying to load P Drivers.. keep getting blue screen then restart over and over... SAmsung clp-300 on XP ???? Tag: reg: hang of hdd or os Tag: 331230
  - 21
    - Installing bigger SATA hard drive - how? My existing hard drive is quite small so I've just got a new Western Digital 500GB SATA II hard drive and want to make it my "main" drive. The BIOS allows a choice of boot device, first one being CD/DVD drive, second floppy drive, 3rd boot device is my existing SATA hard drive and then it goes on to list SATA 2, SATA 3 and SATA 4. I'd obviously like to be able to select my new drive as the first boot device and have my existing drive active so that I could transfer stuff like music, photo's etc., etc by drag and drop between my old and new drives. This of course means that both drives would have a C: drive with Windows XP on each of them, but, because I can select SATA 2 (my new drive) as the first boot device in the BIOS, am I right in thinking that it IS possible - or would they "interfere" with each other and cause major problems? Thanks, John Tag: reg: hang of hdd or os Tag: 331221
  - 22
    - floppy drive not working My floppy drive is giving me an error when I put a disk in it says "floppy disk controller reported error not reconizing floppy disk driver" It seems to be a driver problem I uninstalled and rebooted both driver and controller. Is there any place I can download the standard floppy drivers? Mine might be corrupt Tag: reg: hang of hdd or os Tag: 331217
  - 23
    - Working on Power Supply Question Hi: Power Supply of one of PCs is now dead, as seeing nothing happened even numerous tries by asking questions on other MS Group. Then, I'm thinking of replace 'Power Supply.' The PC with XP is about 5 years old with XP Home Edition made by HP. My question is; Replacing Power-Supply is NOT really hard for a novice like me who only had experience Ram-expansion by opening the PC-case? Any other suggestions and advices would be truly appreciated. Tag: reg: hang of hdd or os Tag: 331215
  - 24
    - Plug and Play detection of Monitor I have a Gigabyte 7VM400M - RZ motherboard and am running XP Pro. I have changed the monitor to a BENQ 900W wide screen but it would seem that the screen is not being detected by Plug and Play. Only "Default Monitor" is shown and I cannot adjust the resolution to the wide screen resolution. The monitor came with a CD containing drivers and instructions on how to load the drivers but in the Device Manager window there is no entry for Display adapter or for Monitor so there is no means of loading drivers. How can I get the new screen recognised and the driver loaded. Tag: reg: hang of hdd or os Tag: 331207
  - 25
    - USB CD-Rom Hello Friend of mine has a Dell laptop, running XP, which has an external USB - CD-Rom Always worked ok, hasn't used it for a few weeks, went to plug it in and it's not working. Well it works coz you can hear it, and the light comes on and the pc detects it when the USB is plugged in and in Hardware devices, but there is a yellow question mark on it in Device manager and it's not found in MyComputer. So we downloaded the Firmware from the Dell website, and it says in the Readme.doc that we have unzip it to a bootable floppy or memory stick, and reboot, let it find the thing and do it's bit and then when it goes to reboot remove the floppy/stick and hey presto. How do we get a bootable floppy or memory stick? Thank you Tag: reg: hang of hdd or os Tag: 331204
- Next
  - 1
    - How possible to use all of my 4GB RAM in windows xp SP2? hi i know that it's really repettitive,but i didn't found my answer! this is my system information: athlon 64 X2 5200+ - nvidia 7950 GT - 4GB DDRII FSB800 in system bios it shows that i have 4GB of RAM , but in windows XP when i right click o my computer it shows 3GB of RAM!(in system information shows 4096mb of ram and in DirectX diagnostic it shows 3072mb of RAM!) and in a program like 3ds max it don't uses more than 3072mb of RAM(it only knows this amount of RAm!)... how is it possible to correct this problem? i need really my 4GB of RAM for rendering in max! do it corrects if i update my motherboard bios? ... help? please... Tag: reg: hang of hdd or os Tag: 331201
  - 2
    - How to Install Remote Printer? I am trying to follow the microsoft instructions for adding a remote printer to an XP machine: - click add printer - tick local printer - install XP drivers etc. The problem is that the 'local printer' option is greyed out. If I take the network printer option then the printer on the Win2000 pc is found but I am not given the option of loading XP drivers. Any thoughts? Davy Tag: reg: hang of hdd or os Tag: 331198
  - 3
    - Will XGI Z9S do 1680x1050? Hi All, XGI's web site stinks. I have Metacrawler'ed z9s for manuals will no joy. Does anyone know if the XGI Z9X will to 1680 x 1050? Anyone know of a link to some spec's? Many thanks, -T Tag: reg: hang of hdd or os Tag: 331187
  - 4
    - what is 1 (x8) PCI-Express (using x16 slot)? Hi All, I am looking at a motherboard that says it has an: (x8) PCI-Express (using x16 slot) What is this? Can I install a PCIe 16x video card in it? Will it only run at half speed? Many thanks, -T Tag: reg: hang of hdd or os Tag: 331185
  - 5
    - OT: old AGP 4x graphics card expert please :-) ....Can anyone reccommend an AGP card for an old Packard Bell ixtreme 6052 with a http://support.packardbell.com/uk/item/index.php?i=spec_UC1&ppn=P851008201 motherboard in it that appears to have a 4x AGP slot, ...and only a 280w psu ? I've been looking at Nvidia 6200 's, 350mhz core clock AGP cards, (8x but is backwards compatible I think). Does anyone know if there's a decnet card with a 400mhz GPU on it that won't suck too much power ? Using http://www.extreme.outervision.com/PSUEngine ...Antecs' power psu calculator, selecting a card above 6200 and the power requirements drops !! any tips appreciated, regards, Richard Tag: reg: hang of hdd or os Tag: 331181
  - 6
    - Problems with graphics card driver I've got a Gigabyte motherboard with on-board VIA graphics and a Haans.G wide screen monitor. No CD that came with the motherboard though. After downloading the graphics driver from manufacturers website I was able to change the resolution to what I want which is 1280x786pix. After rebooting the computer graphics card driver goes back to generic driver and in device manager I've got a yellow exclamation mark next to the graphics card. I was struggling with the problem for a while also downloading the driver straight from VIA. No luck. Finally fed up with all this situation I bought an AGP graphics card from NVidia, installed the drivers and eventually set the monitor to required settings. All was fine till I rebooted the computer. Guess what... I'm back with generic driver and in device manager I've got a yellow exclamation mark next to the graphics card where it says NVidia .... I attempted one last try updating the BIOS. Didn't help. I run out of ideas. Any suggestions are most welcome. yaro Tag: reg: hang of hdd or os Tag: 331161
  - 7
    - Safely Remove Hardware icon doesn't appear When I use a USB thumb drive in one machine, a laptop, running WinXP I don't get the icon to Safely Remove Hardware. It doesn't matter which thumb drive I use, and I get the message for these thumb drives on other machines. I am not hiding inactive icons. The thumb drive contents show up in explorer. How can I get this to reappear, or is there another method I can use to stop the process? It's using USB 1.0 on the laptop. Thanks Mich Tag: reg: hang of hdd or os Tag: 331157
  - 8
    - External hard drive crash Hi, I have a firewire/USB2 external combo drive, which is my main backup drive for my laptop. Tonight it was working fine as normal and then it just went dead. I have tried both the USB and firewire connections on two different computers. The computer recognises the device after plugging it in and swtiching it on and then My Computer window freezes and the disk drive makes a rythmical clicking sound that I haven't heard before. Please don't tell me there's no way to recover the files. Half of them are backed up on another external drive but I hadn't quite finished this secondary bacup process. Any suggestions as to what may be causing this and any solutions?? Thanks. Tag: reg: hang of hdd or os Tag: 331149
  - 9
    - Can an ISP disable modem configuration? Have a Versatek ver170p modem. It works fine. I bought it from my ISP last year when I signed up with them for high speed internet service. According to the instructions that came with the modem (and on Versatek's website) I should be able to configure the modem by entering http://192.168.1.1 in a browser, but when I do this in Internet Explorer I get "Internet Explorer cannot display the webpage". In Firefox it shows "The connection has timed out". When I "ping" it, everything is okay. Have tried this with my firewall off, same thing. I've never been able to get into the configuration menu of the modem, when I first got the modem I tried and couldn't but didn't worry about it because the modem worked. Yesterday thought I'd try again to get to the configuration menu but got the same thing that I got last year. I know, if it ain't broke, don't fix it, and I don't intend to fool around with any of the configuration settings, but it bugs me that I can't get to the configuration settings. I'm presuming that my ISP configured the modem to whatever configuration it needed to connect to them, but could they also have configured it so that trying to configure it through a browser and http://192.168.1.1 wouldn't work, to prevent anyone from changing the settings? Tag: reg: hang of hdd or os Tag: 331148
  - 10
    - All In Wonder 9600 series Automatic Update.... Microsoft Update and Windows Update for Windows XP Home SP2 are including a high priority automatic update for the "All In Wonder 9600 series" ATI Graphics Cards. The AGP model of the card will not work with this update and may destroy it! A complete system reinstall will not fix this issue. The update states a release date of October 2007. If you have one of these cards you will most likely never be able to watch TV on you PC anymore as a result of this update. It does something internally to the ATI board making it think its an "ATI All In Wonder 9600 Radon" which is a different display card. A $189 card destroyed, thanks to a bug in Microsoft's code. If there is anyone else with this problem?????? post on this thread! To disable this update and continue to use Automatic Updates, go to the update site with IE 6 or 7. Select CUSTOM. Find the update and select the text, de-select the install checkbox and select the Hide option directly under the description. The most stable release for the drivers are available from the http://ati.amd.com Support Team. You need to contact ATI support by submitting a support request. They will tell you which version to download since the most recent update from March 2008 fails, only after the Microsoft/Windows update. If the ATI update that the support team gives you still fails, you need to contact Microsoft's support and speak to a 2nd or 3rd tier technician! Unfortunately the Microsoft support website will try to refer you to the PC manufacturers website/support. They won't be able to help you and recovery CD's that they get you to purchase won't fix the destroyed Card. Tag: reg: hang of hdd or os Tag: 331144
  - 11
    - Sound Card Enabled but not started Alas the time came to reformat my wife's computer, too many things did not work as they were suppose to, so I gathered together all of the system discs and backed it up, then I popped in a new harddrive to give her more space. Everything went well until she came home and tried to listen to an email audio note. No sound. I have tried everything I can think of to resolve this problem. I have reinstalled the card many times from the system disc, the Acer site and the SC company site, and have no where else to go. Please read this completely and help me if you can. Here is the information from msinfo32 on the sound device.MS XP Pro SP2 Name Conexant AC-Link Audio Manufacturer Conexant Status OK PNP Device ID PCI\VEN_8086&DEV_24C5&SUBSYS_00641025&REV_03\3&61AAA01&0&FD I/O Port 0x00001C00-0x00001CFF I/O Port 0x000018C0-0x000018FF Memory Address 0xE0100C00-0xE0100DFF Memory Address 0xE0100800-0xE01008FF IRQ Channel IRQ 10 Driver c:\windows\system32\drivers\camcaud.sys (6.13.10.8310, 285.50 KB (292,352 bytes), 4/18/2008 2:52 PM) I have used the included system disc for my wife's travelMate2300, been to both the Acer site and the conxant site to get updates. I have installed them.I received an answer from a microsoft Vista tech after he read this and he linked me to the same acer dowload I have already loaded. Everytime it is the same thing. When I click on the properties it says "enabled but not started" The device manager says everything is fine. I have updated, disabled and enabled. I have gone to services and started the Widows Audio service I have even tried removing fast detect in the boot.ini file as one post suggested Where do you start it? I have formated and installed hundreds of computers as a high school computer tech and this is the first time I have ever had audio problems. Usually it happens automatically. Here is the system summary: System Manufacturer Acer System Model TravelMate 2300 System Type X86-based PC Processor x86 Family 6 Model 13 Stepping 6 GenuineIntel ~1298 Mhz BIOS Version/Date ACER 3A07, 8/3/2004 SMBIOS Version 2.31 Windows Directory C:\WINDOWS System Directory C:\WINDOWS\system32 Boot Device \Device\HarddiskVolume1 Locale United States Hardware Abstraction Layer Version = "5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)" User Name VJP-01\Virginia Time Zone Mountain Daylight Time Total Physical Memory 512.00 MB Available Physical Memory 88.60 MB Total Virtual Memory 2.00 GB Available Virtual Memory 1.96 GB Page File Space 1.13 GB Page File C:\pagefile.sys And just in case it matters here is the IRQ list IRQ 0 System timer OK IRQ 1 Standard 101/102-Key or Microsoft Natural PS/2 Keyboard OK IRQ 6 Intel(R) 82852/82855 GM/GME Graphics Controller OK IRQ 6 Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2 OK IRQ 6 Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4 OK IRQ 6 Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7 OK IRQ 6 Broadcom 440x 10/100 Integrated Controller OK IRQ 8 System CMOS/real time clock OK IRQ 9 Microsoft ACPI-Compliant System OK IRQ 10 Intel(R) 82801DB/DBM USB2 Enhanced Host Controller - 24CD OK IRQ 10 INPROCOMM IPN2220 Wireless LAN Card OK IRQ 10 Generic CardBus Controller OK IRQ 10 Intel(R) 82801DB/DBM SMBus Controller - 24C3 OK IRQ 10 Conexant AC-Link Audio OK IRQ 10 SoftV92 Data Fax Modem with SmartCP OK IRQ 12 PS/2 Compatible Mouse OK IRQ 13 Numeric data processor OK IRQ 14 Primary IDE Channel OK IRQ 15 Secondary IDE Channel OK Mark S. Pulver Tag: reg: hang of hdd or os Tag: 331136
  - 12
    - Missing Multimedia Audio Controller HELP!! i just rebooted my computer and installed windows xp, like the most posts i've read, i am also having an yellow question mark next to the multimedia audio controller and video controller (VGA compatible) My Device instance id is PCI\VEN_1039&DEV_7012&SUBSYS_53321462&REV_A0\3&61AAA01&0&17 is there anything else you guys need to determine the manufacturer? what should i do?? thanks in advance!!Greatly appreciated Tag: reg: hang of hdd or os Tag: 331126
  - 13
    - 3COM 3C556 Hurricane Driver? I installed Windows 2000 (not recovery disk version) on an IBM Thinkpad A21m. The Thinkpad has a 3COM 3C556 Hurricane mini PCI ethernet/modem card. Windows can't find a driver for it. I looked on the 3COM web site, but I can't find a "3COM 3C556 Hurricane" specific driver. Does anyone know what driver I should download and use? Thanks. Tag: reg: hang of hdd or os Tag: 331124
  - 14
    - corrupted USB flash drive Suddenly I got a problem on a iomega mini usb drive, that worked OK for long time. Inserted the new drive is immediately seen and assigned a letter "X". If I click on it, I get an error message "insert a disk in the "X" unit". I tryed almost everything as my first thought was that the partition data has been for some reason, corrupted. 1) Same result got on different PC 2) Same result got if I insert the flash before or after the boot. 3) Of course I cannot reformat as the unit is recognized but the volume/disk is not. 4) I downloaded several software claiming to recover, format, partition etc USB devices but : no result. 5) Partition Magic 8 doesnt see the drive, only fixed disks 6) Read everything I could find on MS Support, On Google , on Groups etc. 7) No possibility to reach the storage for a low level formatting. This is my last attempt, if someone of you has another idea ! After I will go to buy a new drive !! :-(( Thanks Manlio Tag: reg: hang of hdd or os Tag: 331115
  - 15
    - num lock not working correctly on laptop with numpad I had to reinstall XP after some work was done on my laptop. Now, the numlock key makes the letters on the right of the keyboard send numbers (like many laptop keyboards are supposed to do). But my laptop has a separate number key pad. Before I reinstalled XP, num lock worked correctly and turned the number keypad while still letting me type letters. Tag: reg: hang of hdd or os Tag: 331099
  - 16
    - D-link Router DI 624 Is there a way for me to find out my ID and Password on my D-link 624 router? The ID and PW which I wrote down some time ago does not seem to work when I use Network Magic. Tag: reg: hang of hdd or os Tag: 331096
  - 17
    - USB Power lost. Hello, I have a CNC control running XP Embedded. It communicates to the host computer via USB to serial adapter. The communications work until the machine runs a large program. After that the software give an error. "unable to open port" I believe something is killing power to the USB. After rebooting the system everything works fine. The system started doing this after software & bios update. I would appreciate any ideas as to what the problem may be. Tag: reg: hang of hdd or os Tag: 331094
  - 18
    - DVD-RW drive When i put a blank cd in the drive the computer crashes every time but its ok with audio and data disks. Tag: reg: hang of hdd or os Tag: 331089
  - 19
    - CD-ROM (D:) drive disappears/reappears I am running XP Pro and sometimes when I try to burn a CD, the D: Drive icon is gone or disappears while I am looking at it. When I reboot, its there and I can burn the CD? Sometimes it burns fine, other time it is gone? This has happened approx. 20-25 times? I have tried reinstalling windows for missing drivers, changed CD drives, and recently made sure all connections from motherboard and power supply to drive is correct and secure? Any ideas? Tag: reg: hang of hdd or os Tag: 331082
  - 20
    - Samsung CDRW/DVD will not write to disc I have Windows XP Professional SP2 stand alone home computer with a Samsung CDRW/DVD SM 308-B. It runs & installs software CD's and DVD's ok. Problem: On my home computer, I cannot copy data or other files from the HD to the (high speed) CDRW disc; but I have no problems on my computer at work that also runs XP Pro. I don't know which CD/DVD is installed at work. At home, the Wizard says the "disc is not useable" and to try another, but I just bought a new pack of High Speed CDRW's. The only files I tried were MS Word processing files and a .wav file. I haven't tried CD-R's because I am transferring data to give to others that they may want to modify later. Home computer does not have any third party CD/DVD RW software. The work computer has Roxio installed but that didn't activate, I had success with the Windows XP version. I checked drivers and everything comes back OK, and updates come back as current. Tried to uninstall - reinstall drivers but it did not change. I also checked that IMAPI service was turned on - which is OK. Device was also set to Record. Any suggestions, or should I just pitch it and get new hardware? Thank you for your help. Tag: reg: hang of hdd or os Tag: 331076
  - 21
    - Why does my USB 2.0 ports not perform at 2.0 speeds? When I connect a device to any of my USB 2.0 ports on my computer, I get a message that says "This device can perform faster if you connect it to a Hi-Speed USB 2.0 port". What can I do to fix this problem? In Device Manager, I do see a Standard Enhanced USB host. I do not have a PCI USB card in the computer. The USB ports are provided by my motherboard (ECS GeForce6100SM-M). It doesn't matter whether I connect the device to the front or the back ports. Tag: reg: hang of hdd or os Tag: 331068
  - 22
    - virus? I have a computer with windows xp loaded that will not boot up. When powered on it passed the post test but will not boot to windows and will not enter safe mode. It does attempt to boot windows but whent he display shoulde be listing the primary master disk, instead of displaying pri.master disk it replaces the r in pri with a red smiley face. Any suggestions? i can't get to the dos prompt either. Thanks for your sugestions. Tag: reg: hang of hdd or os Tag: 331060
  - 23
    - Hard Disk Cooler for Temps above 55C? Hello: I recently installed HardDisk Tune 2.55 [HD Tune]to monitor my Hard Disk: IC35L080AVVA07-0. I believe this HD was made by IBM The status readings for that disk are all OK, except for temperature ranges from 48C---59C. It's generally at about 51C but does go up gradually at times to 59. In Farenheit reading this would be: ~120--138 F The FAQ for HD Tune reads: " The temperature of the hard disk should not exceed 55°C/131°F. By default HD Tune warns you if the hard disk reaches this temperature. In this case it's recommended to use a hard disk cooler to extend the life of the hard disk" What exactly is meant by hard disk cooler, and how is this applied/installed? Can you give me some links for such products? What would be the simplest way to address this? Thanks in advance: -eli ============================== Windows XP Professional Edition Zone Alarm Security Suite 7.0.740.000 HD: IC35L080AVVA07-0 Tag: reg: hang of hdd or os Tag: 331029
  - 24
    - DVD drive disappeared and can't uninstall My DVD drive has disappeared several times. The first time I resolved it by deleting Upper and LowerFilter registry keys (per Microsoft support article 314060 http://support.microsoft.com/default.aspx/kb/314060). This time the Upper and LowerFilter registry keys are no longer there. I still cannot see the drive in Device Manager so I can't uninstall the drive. The drive lights up and I hear the disk spinning, so it doesn't seem to be a power issue. The last time I had this problem it resolved itself after several reboots. This time I'm out of luck. I've spent hours trying to resolve it and I'm desperate - any help much appreciated. Tag: reg: hang of hdd or os Tag: 331020
  - 25
    - Power Surge On Hub Port - Please Help Hi, Please could someone help? I have an Acer TravelMate 800 laptop which has 4 USB ports. I have a Western Digital Passport external hard disk (320GB) and whenever I try to connect this device I see the following error: "Power Surge on Hub Port. The USB Mass Storage device has exceeded the power limits of its hub port." The device never appears in 'My Computer'. I am prompted to disconnect the device and then click on 'Reset'. I can connect a USB mouse in to any one of the ports and it works fine. I can also connect a Kingston Data Traveller pen drive (512MB) in to any one of the drives and that also works fine. It is only this Western Digital Passport external hard disk which causes this error. Can anyone help? Can it be resolved? Any ideas most gratefully accepted. Tag: reg: hang of hdd or os Tag: 331016

your problem is in RAM. plz change your RAM or remove CMOS battery, turn on & off ur computer. place back ur CMOS battery

if problem solved reply me.

Top