dvd combo doesn't work since upgrading to sp3

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - how do I send sound to multiple outputs If I have a creative soundblaster and I have four different sources I'd like to send sound to: 1. headphones 2. mini speakers 3. LCD TV 4. receiver Is there some kind of good switching device out there to do this, or is it more common to route the sound from the pc to the reciever, then from the reciever to the other three sources, requiring me to have it on whenever I want to hear sound from any of the four sources? Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332477
  - 2
    - d drive missing i used patition magic to transfer free space from d drive to c drive the d drive does not show on the my computer list the drive exists and i have transfered free space suggestions? -- ethanhunt22 ------------------------------------------------------------------------ ethanhunt22's Profile: http://forums.techarena.in/member.php?userid=51042 View this thread: http://forums.techarena.in/showthread.php?t=981358 http://forums.techarena.in Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332476
  - 3
    - Windows disconnects CDRom at startup Hi I have a laptop which makes disconnects the CD/DVD drive at startup. I recieve a message that the drive has been safely disconnected. If I start windows in failsafe mode the cd is ok. Any ideas what can cause this and a solution? Thanks Rickard Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332469
  - 4
    - Installing the Zalman CNPS9700 LED I have a couple of questions here. Now don't tell me to go to their website and get their support. Their support is down for a couple of weeks. I have a Intel Socket 775. I want to know if I need to remove the motherboard to put the backplate on. Anotherwords, do I need to install anything on the underside of the motherboard? Also I want to know which bolts I put the pressure on when I'm screwing them in. Do I put pounds of pressure on the Four (4) Clip Support Fixing Bolts for Socket 775 or do I put the pressure on the Four (4) Bolts ( for installing the cooler)? Anotherwords, there are 4 short bolts and 4 long bolts, which ones do I put the pressure on when I'm installing the cooler? Or am I wrong all together and I don't put pressure on any of the bolts? Then, can you tell me what part of the components I put the pressure on? I have a feeling it's the short bolts I put pressure on. I would greatly appreciated any hints someone could me on installing the cooler. Thanks, attilathehun1 Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332443
  - 5
    - xp pro sp2 Intel p4 2.4 - processor stopped? I've noticed after the pc is up and running, the service(processor driver), service key name(processor), startup type(Automatic), status(stopped). How can the processor drive be stopped? Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332442
  - 6
    - keyboard doesn't work on ms wireless multimedia keyboard I have a ms wireless multimedia keyboard 1.1 which has stopped working yes, I have replaced the batteries! the multimedia keys work phil170258but not the keyboard itself I installed new software Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332435
  - 7
    - HP 932 printer dosen't show in device manager Hi Everyone, On my WinXP Pro SP3 computer, I have installed a HP 932 printer , that dosen't show in device manager . I've had the printer for several years, and it always works well with my computer . But the other day I realized that the printer dosen't have a entry in device manager. Does anyone have any ideas on why the printer dosen't show in device manager ? Thanks ! -- your friend, Larry Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332422
  - 8
    - how to get rid of program from windows xp? Hi I have windows xp on a pc , I am trying to install rise of legends, but it is saying '' remove R. Of Legends demo'' we have been into add remove programs screen and removed but it has left the title on the page and I cant get rid of that although its showing no Kbs in program size column What do I do next? I have searched for any files and nothing found -- Mirey86 Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332414
  - 9
    - HP NX9000 - Synaptics touchpad, mouse and keyboard problems I have a problem with my HP nx9000, mouse and keyboard are not working correct. Mouse pointer stops (get stuck) for 0,5-1 sec on the screen during normal movements, then go on. It comes every 5-6 seconds continuously. Also keyboard - some "blank" typing, it miss some symbols, with no reaction. It seems like some operation is always on, hard drive i/o operation indications every 5-6 secs. "Filemon" software shows permanent "query information" to "netshellicon" non-existing folder/file every 10-15 seconds. Help me!!!! XP SP2 installed, HP all upated drivers installed, "Synaptics" drivers also I have final. Only thing is no ok - battery is dead, I'm working from net. But all battery controlling issued in "devices" I turned off. On W2k this problem I don't remember. Thank you! Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332411
  - 10
    - Upgrading to USB 2.0 Hi, I want to upgrade my old machine (anno 2001), which is running OS: Xp pro sp2, to USB 2.0. Mainboard: MS-6330 v.5.X based on chipset: VIA KT133A (VT8363A & VT82C686B) I have been searching for a suitable card and have come up with this, but I am not sure: http://catalog.belkin.com/IWCatProductPage.process?Product_Id=107412 My worry is: Is it compatible with the VIA chipset? Does anyone out there have any experience with this card and VIA? I realize VIA is not held in high regards, so I fear the installation might cause compatibility problems. Am I being too cautious? Are other cards you would like to recommend? Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332405
  - 11
    - external drive queries I'm using Windows XP, SP3 on my 5-year-old Dell desktop computer, which has a 60GB internal hard drive and USB2. I want to be able to clone my internal hard drive to an external USB drive (or more than one, for security). I've been getting great information and advice here about these drives. After reading through everything, I have a few more questions: 1. If I clone my internal hard drive to an external USB drive and the internal drive crashes, how difficult would it be to install the external drive in my computer in place of the dead drive? I've been told here that all you need to do is take the external drive out of its USB enclosure and put it into the computer in place of the drive that's there. Would I need adapters or anything else that I might not have on hand? As far as I know, my computer can handle a large (>137GB) internal drive--although I'll make sure before I buy one. 2. I believe external drives are generally FAT32 format whereas internal drives are NTFS (mine is NTFS for sure). a. Would that be an issue in connecting the external drive internally? b. Would it be wise to reformat the external drive? c. Would cloning the internal drive onto the external drive reformat the external drive? 3. Originally I planned to get a very large external drive. However, given that my internal drive is only 60GB and I haven't used even half of it, would it make more sense to get, say, a 160GB external drive if it would be used only as a clone for the internal drive? (Someone suggested that I simply get a large internal drive, clone the smaller drive to it, and switch the larger one to become the main drive. I may decide to do that as well, but I like the idea of being able to store the external drive away from the computer.) 4. I've gotten conflicting opinions on whether to get a desktop external drive or a portable: a. Is either type more reliable generally? b. Are there particular drives whose housing allows better airflow than others--or that even have a fan? I've been told I could just put together my own drive, using a good enclosure, but I'm not sure I'm up to that. Sorry to keep coming up with more questions! I've been using a computer for many years and backing up my data as best I can, but this is the first time I've thought about how to deal with a major crash. Thank you! Jo-Anne Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332391
  - 12
    - nvidia / momentary black screen / refresh ! ...just unnecessarily fought for an hour or more to fix a momentary "black screen" or "refresh" if you prefer, every time something is mouse clicked in nvidia control panel, .....after uninstalling and installing newer nvidia drivers. !!!! To cut a long story short, after a hunt on the web, spotted a couple of people who were told it was the "fault" of the monitor - I prodded the power off button on the monitor, (older Xiod / Samsung CRT), then after a few seconds turned it back on - "PROBLEM GONE !" ...so there you are, if you upgrade Nvidia drivers, and get a momentary balck screen, every time you click on something in nVidia control panel, or the sytem tray icon for nvidia, and if you happen to be using an old, but newish !! CRT, simply turn it off and back on again - i.e. it's a temporary condition in the monitor. ...no would this have happneed if I'd had an LCD on that PC ? regards, Richard Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332381
  - 13
    - Windows -no disk I receive the error message "Windows - no disk Exception Processing Message c0000013 Parameters 75b6bf9c 4 75b6bf9c" I am sending the error report from the event viewer Event Type: Error Event Source: HDD Info Service Event Category: None Event ID: 6 Date: 6/2/2008 Time: 11:18:09 AM User: NT AUTHORITY\SYSTEM Computer: DESK Description: CheckTemperature. Exception. hr = 0x80004003. Thanks for any assistance. Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332371
  - 14
    - Hard Disk Problem Since two weeks ago, I had a hard disk problem. It said: "\Device\Harddisk1\D, has a bad blocks" I want to ask some questions, I think it is really long because I want to know the most reliable answer/opinions so I'm write clearly about my condition: 1.What should I do now? Now I'm in the middle of backing up my data by copying them, but event viewer sometimes gave me in the middle of copying: a.An error was detected on device \Device\Harddisk1\D during a paging operation. b.The device, \Device\Ide\IdePort0, did not respond within timeout period. c.A CRC error (Someone tell me it is because the data that was copied is in Bad Blocks. Someone tell me that these event are caused by the Bad Blocks because these event start appearing as my HD get Bad Blocks, but I want to be sure that I don't have any other hardware problems. Also, someone tell me, another hardware error doesn't cause bad blocks. Is it true? Could someone clarify this? 2.I wonder what caused the bad blocks? Because, there is 3 HD in my Computer. The first one is where I installed my Windows. It is 6 years old and never had any Bad Blocks problem. Now it still doesn't. (I hope it doesn't/won't appear because I make two partition on it C:/ and D:/ and many important files especially in D:/, C:/ is where I installed Windows and many other programs.). The second one is the HD with Bad Blocks.It was bought 1 years and 3 month ago. Some people said it was because overheating but this HD has lower temperature in SMART Test (41 C while the other two is 43-45 C) and sudden movement, I still don't think this is the cause because if it it true, the other two could also have Bad Blocks but it doesn't happen. The third one is my Brother HD that has same type and was bought on same day with my HD that has Bad Blocks. His still doesn't any problem with Bad Blocks. Using Speedfan, The fitness of my HD that has Bad Block is only 57% while my 6 years old HD is 98% and my brother 95%. So, I wonder what caused the differences, I used all the HD with same working time ,obviously (all the HD is powered up as my PC is powered up). A Comupter technician tell because there is too much data in my HD, I think that not really correct, my 6 years old HD in D:/ partition has only 1% free space from 20GB (about 110MB), while this HD with Bad Blocks still has about 16-20% free space from 160GB (about 35GB). 4.Some people say that Bad Blocks could be cause by Logical or/and Physical problem on the HD and if it was Logical, it could fixed with some program/software, it is true? 5.I've brought my PC with all the HD to a Computer Technician and he told me that the HD (that with Bad Blocks) is fine and he told me to format it to fix this problem. Should I do as he says or get a new HD? 6a.If I should/must get a new HD, should I run a HD Check Utility as precaution there is not Bad Blocks in the new HD? 6b.If I copied backup data from my External HD, will the new HD get Bad Blocks problem? 7.In my brother HD there is a weak sector when I'm verify his HD using HDDScan, there is a folder that took about 15-30 seconds to access, it is about 15GB and has about 30.000+ files.This folder was always like that since several months ago when it was created, it holds several games for PC. Does this cause the weak sector/ was caused by the weak sector? Thanks. Sorry it is really long Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332370
  - 15
    - WinXP won't open downloaded EXE files. I've a friend with WindowsXP Home. She just installed a new modem and got dial-up service. (Lives in the boonies.) She downloaded the Skype and ZoneAlarm setup executable, but when she tries to run them she gets an error that Windows can't open them, not a valid executable. I made sure EXE and LNK are in the file types associated with Application and Shortcut. Also, she can run cmd.exe, so, it's not an association problem...it must be those files. Had had her look at the properties, and both say foo.exe as opposed to foo.ex_ or some other indication that they weren't fully downloaded files. Any ideas what I can check or do? Thanks! Liam Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332368
  - 16
    - startup I started my computer but it gets as far as splash screen then hangs up for 2 hours before loading. I took out the cmos battery for 20 seconds then when i put it back in the computer booted normally. When i closed the computer down and tried to open up again the same problem occured. I replaced the cmos battery, but i still have the same problem. When i first turn on the computer i hear no post beeps. Please help someone. Thanks Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332367
  - 17
    - which Asus P5K motherboard ? I need to buy an Asus motherboard for a new PC. P5K seems to be a good choice, yet there are so many variations of this motherboard. Some have small heat sinks, some have elaborate heat sinks. Please give me some advise on how to narrow things down. Thanks. Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332352
  - 18
    - The battery on the motherboard If the battery is not working anymore will that cause the PC to stop working? I checked the 3 volt 2032 battery and it was dead. The PC one day didn't start up. Nothing was replaced or upgraded or installed. It quit one day and that was it. If I put a new battery onto the motherboard will it start up and be ok? Any help would be greatly appreciated. Thanks, attilathehun1 Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332328
  - 19
    - mp3 will not start i thought that since the zune player would not zync with my computer , I would just buy a samsung and all my troubles would go away . WRONG . when my daughter connect her samsung mp3 to my computer a ballon tells us found new hardware - mtp device . then the ballon will minamize and come back ,again and again . the player seems to be in a startup loop . I have tried different connection points , unpluging the printer and restarts . nothing helps . please help . my 15 year old is going to explode if she cannot listen to her taylor swift . Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332321
  - 20
    - Internal WD Hard Drive I just installed a new seta WD 400gb hard drive. I cannot see the hard drive under the my computer folder however the diagnostic tools can find the drive. Any thoughts? Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332300
  - 21
    - geheugen probleem Compaq Presario 6000 series Doordat de Compaq Presario van mijn dochter nogal traag was geworden, leek het mij zinvol om het register eens onderhanden te nemen met Registry Mechanic. Er werden heel wat fouten gevonden en hersteld. Bij de systeeminfo ontdekte ik echter dat het RAM-geheugen van deze PC 224 MB zou zijn in plaats van 256 MB. Het BIOS geeft echter nog steeds 256 MB aan. Bij de Windows systeemeigenschappen staat ook 224 MB. Ik heb met een aparte opstart cd-rom van Windiag het geheugen langdurig getest. Daarbij werden geen fouten gevonden. Hoe kan het dat er geen fouten worden gevonden terwijl ik wel 32 MB geheugen mis? Heeft het ontbreken van die 32 MB consequenties voor de goede werking van de PC en is het noodzakelijk om de DIMM te vervangen, of kan ik er gewoon een extra DIMM van 256MB of 512MB bijplaatsen? Er wordt nu slechts één van de 2 geheugenbanken gebruikt. Marius Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332294
  - 22
    - floppy am just building a 2nd box and plugged in the floppy cable into the MOB and found that the drive has more pins than this cable has ,need an answer please With kind regards From OZ Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332287
  - 23
    - DVD writer drive not accessible? I have a DVD Combo with CD writer (D drive in my PC) and I have also a Dual Layer DVD writer (E drive). Both are SONY make. Kept a DVD in D drive and copied it to E Drive using Nero, Jolly Well. E drive is working properly as per the properties. When I make a DVD using Nero Express 6 (this came with the DVD burner), the DVD plays well in Drive D and when I hit Explore Drive/Device D, it displays all the contents in the DVD. But when the same DVD is kept in Drive E, hitting Explore shows nothing in it. Clicking on E drive in windows Explorer says E:\ is not accessible--Incorrect function. Where is the problem any guidance on this please? dkb Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332279
  - 24
    - cleaning LCD monitor I've been getting so many warnings about what not to use to clean LCD monitors that I haven't a clue what I CAN use safely. Mine is 5 years old and really needs to be cleaned with more than a quick wipe. What can I use that won't damage it? Thanks much! Jo-Anne Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332264
  - 25
    - Green Gauze Monitor and Slowdown at Windows Loading Screen Hey all, recently when I start my computer I get a green rolling screen which after 20 seconds flicks to the black bios startup. During the bios check the screen flashes green as if it's degauzing several times...then after 5 minutes of the windows loading screen windows starts up in a really slow manner, the deskop appears, then goes blank, then the icons and tool bars appear. My computer has always started really quickly and I've never had the green gauzing effect...even when the monitor powers down it fades to a bright green dot in the middle of the screen. Once the tedius loading it out of the way windows actually works fine, and even high spec games like CoD4 run without error (but the screen does flash green whilst changing resolution to play them) I assumed that it was the monitor itself, but that doesnt explain why windows is taking ages to load...is it a problem with the graphics card? do you think it's hardware or software based? I'd really appreciate any advice Thanks a lot Al Specs AMD Athlon 64 X2 4200+ Radeon Sapphire x1600 AM2NF3-VSTA motherboard Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332260
- Next
  - 1
    - Seagate FreeAgent Ext Drive I have been trying to look up my freeagent ext drive to my dell dimension B110. no luck. thought it might be the drive, but it worked first time when i plugged it into a different pc. any suggestions? Thanks Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332248
  - 2
    - large external drive OK? I have a 5-year-old Dell desktop computer running Windows XP SP3. I want to buy my first external hard drive and have my eye on an Iomega 500 GB drive. One of the reviewers of this drive at Amazon said that it wouldn't work with her older computer, which is about the same age as mine. The reviewer asked at a local computer store and was told that in general the large external drives don't work with older computers. (My internal drive is only 50 GB, as I recall.) Is that indeed the case? Thank you! Jo-Anne Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332238
  - 3
    - pioneer dvr can't install anything Hello...........This is my first post. I have been using a Pioneer dvr-610 (device manager says Pioneer dvd-rw dvr-110d) with win XP and I have never been able to install anything from it. For some reason I get messages basically saying it's unable to complete setup.exe and autorun. To setup the computer I had to use an A-Open dvd rom. The Pioneer will play music cd's. I dual boot XP with win 98 se and the Pioneer works perfectly when I'm in win 98. I've looked through many of the posts here but nothing quite like my problem seems to exist. I don't know exactly how to tackle this problem. Any help will be greatly appreciated..... Thanks....... Mark Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332235
  - 4
    - tracert times out I want to do a tracert on comcast.net (my ISP) and it always times out, yet I can get e-mail and see newsgroups. What does it mean then and what to do to do a tracert? Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332232
  - 5
    - Another USB Quandary I'm playing with two things, an Intel DG965SS mobo and Microsoft's UVCView.exe USB tool. UVCView shows that there are seven root hubs, two of which contain the magic word: Enhanced, which means they are Hi-Speed USB. The board has ten physical ports. When I inventory the physical ports....plug in a device and see which root hub/port is connected to each physical port, none of the physical ports match up to the two Enhanced Root hubs shown in UVCView. At first glance that would mean I don't have any hi-speed USB ports, right? But, the Intel product specs claim hi-speed on all ten physical ports. So, is it possible that UVCView isn't showing me the entire story, and that the mere presence of an Enhanced root hub (anywhere) means I've got hi-speed everywhere? Do some motherboards have mixed USB...some full-speed and some hi-speed? If so, how do I determine which is which? -John O Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332215
  - 6
    - CD-DVD missing from 'My Computer' My CD-DVD is missing in all applications. This happened 3 weeks ago and I fixed it with DougKnox's fix. last night I tried three fix's from here including Knox's, this time nothing works! DVD seems to disappear after microsoft auto updates go onto my laptop. Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332192
  - 7
    - earthing Vs system stuck(hang) can it is possible a system get hang because of not proper earthing?? actually i got new pc i changed all the parts of system like MB, RAM Processor but still it hangs , my vendor says it is the problem of EARTHING ... can is it possible?? please suggest me thanks Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332191
  - 8
    - Computer shutting down randomly I am fixing a computer for a friend. It seems to shut down without any reason and then reboot (no BSOD). I reformatted the hard drive, put in new memory, new video card and new soundcard to bypass the onboard audio/video. It seemed to work ok, but after about 45 minutes, it shut down. I clean the CPU fan, checked all the connections and cannot find the source of the problem. I have upgraded to SP2 as well, but again - I thought at first it might have been a virus or software problem, but now I am not so sure. I am going to run the ASUS probe software and see if the temperature is fluctuation, but it seemed quite cool. Any ideas? Does this sound like a motherboard issue or a power supply? Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332180
  - 9
    - 64 bit xp I am having a problem getting xp to see all 4 gigs of ram on windows xp 64 bit.... I still am not finding the right answer after much research... I even did the old boot tab on msconfig but still nothing Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332173
  - 10
    - Original WinXP Pro OEM disc (before any sp releases) I want to install a 1 terabite hard-drive and would like to make a slipstreamed WinXP install disc that has LBA. Will slipstreaming SP3 accomplish this? Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332168
  - 11
    - No Audio for DVI-D input When I connect my ViewSonic LCD monitor by the DVI-D cable the sound is gone. I have tried with uninstalling/reinstalling the Realtek sound driver but it doesnt work whenever the DVI is connected. The sound is as good as before when RGB is connected. My computer is AMD 4800+ processor in ASUS M2N-VM DVI motherboard. Please help. Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332150
  - 12
    - WD External Hard Drive (connected by USB Port) Is it possible to switch my desktop pc internal hard drive ( "C" drive) which has only 8.35GB of Storage space and I think is the primary/boot hard drive,and assign my new WD External Hard Drive w/160 GB of storage space as the primary hard drive? It can't be as simple as just changing the drive letters , can it?...any info or suggestions is greatly appreciated.......THANKS....Mario33 Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332146
  - 13
    - Using CHKDSK with XP I ran chkdsk (from within My Computer) on my system drive. It completed the first couple of phases but then said that it could not complete chkdsk. I was expecting it to give me the option to schedule chkdsk when the PC was re-booted but to no avail. I decided to re-boot anyway but chkdsk did not run. How do I carry out a full chkdsk on my PC? I'm running Win XP Pro SP3. JPC Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332144
  - 14
    - =?windows-1252?Q?www=2Eelectronics=2Dmac=2Dsony=2Ecom___Samsung_=2D_T10_4GB=2A_MP?= http://www.electronics-mac-sony.com/goods.php?id=306 Contact us : 7*24 hour On-line service: MSN/Email:electronics-china-2008@hotmail.com Our website: www.electronics-mac-sony.com Product Description Product Description With a 4GB* flash drive capacity and an extended 30 hours of battery life, this MP3 player ensures you'll be able to listen to your tunes wherever you go.Product Features4GB* flash drive Pocket-size design measures just 0.3" thin and weighs just 1.6 ounces Supports MP3, WMA and WMA DRM music formats; plus JPEG, MJPEG, MPEG4 AVC, MPEG4 XviD, DivX and WMV video formats Touchpad interface is easy to use Built-in FM tuner; Bluetooth audio streaming Integrated voice recorder lets you take notes and record memos USB interface for convenient connections Rechargeable battery provides up to 30 hours of playback Music management software included *Note: Actual formatted capacity less.With a 4GB* flash drive capacity and an extended 30 hours of battery life, this MP3 player ensures you'll be able to listen to your tunes wherever you go.Product Features4GB* flash drive Pocket-size design measures just 0.3" thin and weighs just 1.6 ounces Supports MP3, WMA and WMA DRM music formats; plus JPEG, MJPEG, MPEG4 AVC, MPEG4 XviD, DivX and WMV video formats Touchpad interface is easy to use Built-in FM tuner; Bluetooth audio streaming Integrated voice recorder lets you take notes and record memos USB interface for convenient connections Rechargeable battery provides up to 30 hours of playback Music management software included *Note: Actual formatted capacity less. Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332142
  - 15
    - unable to install Realtek High Definition Audio drivers 5423 I am unable to install Realtek High Definition Audio drivers. The install fails irrespective if I attempt to install from CD included with motherboard or downloaded file from web site. InstallShield starts then halts and advises Realtek High Definition Audio driver install has failed. InstallShield then closes. I had tried to uninstalled the audio drivers from the device manager, but it says u dont have any audio drivers installed. i tried all the possible options. My mother board serial is 'Genuine Inter (R) Desktop Board D945GCNL' and the audio driver is "AUD_ALLoS_5423_PV_Realtek' or 'Realtek High Defination Audio Driver 5.10.0.5423' Any assistance is appreciated. Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332133
  - 16
    - keyboard problem hi. my ps/2 keyboard is not working right. When I press "S" key it will show "I", some numeric keypads also dows not show any value. I have tried chaning the keyboard to US-International but still the error exist. I am using Windows XP Pro with SP2. thanks in advance. Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332131
  - 17
    - Parallel port driver - language version Hi ! I'm experiencing the following problem. I'm using a small program NASM to control windows XP home edition parallel port. For that I use Userport.exe and UserPort.sys wich is copyed to c:\windows\system32\driver. In windows xp home edition portuguese, it works. When using an english version, it locks NASMIDE but Windows works normally. Another thing I noticed is that the edit.com (wich I believe is used by NASMIDE) also hangs... Any ideas please ? Why does Userport.exe work in the portuguese version ? Thank you very much. Regards David Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332129
  - 18
    - HP Image Zone - uninstall/reinstall problem Hi Guys, Had a HDD go bad on me, and replaced it. Cloned the old HDD to the new one and did a repair install because some of the windows files got corrupt. All good now execpt for one thing: HP Image Zone now comes up running installer, then gathering information then the weird bit - it bring up a dialog box with some text saying something to the effect that: "The rescource you are trying to use is on a CDROM or other media, please select device" I then have a button "Browse" and a drop down box simple with "1" in it. Ordiniarily when you see this type of message it gives you the name of the file its trying to find, but in this case I get just the "1" and pointing it at the CDROM via the browse button with the HP cd in doesnt seem to help. So i tried a uninstall/reinstall via Add remove programs, that failed, so I did it via the HP CD, but after reinstalling - same error. Anybody got any other suggestions? Upgrade MS .Net maybe? Please help, Cheers -Al WIN XP SP2 Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332124
  - 19
    - FREE Tutorials on HTML XHTML CSS JavaScript XML XSL ASP SQL ADO FREE Tutorials on HTML XHTML CSS JavaScript XML XSL ASP SQL ADO VBScript, SAP - ABAP visit ebooks.univdatabase.com Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332119
  - 20
    - Problem installing hardware I cannot install my IEEE 1394 controller or a 5-button MS USB Intelli-mouse optical or an HP Laserjet 1100 printer. The hardware is detected and properly identified but the driver install ends with: There is a problem installing this hardware: IEEE 1394 Controller An error occurred during the installation of the device The data is invalid I get the same error for the mouse. For the printer I get: Printer driver was not installed. Operation could not be completed. I am running Windows XP SP3 with all updates installed (same problem when it was SP2). Uninstalling and re-installing does not help. Any ideas? Thanks... Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332112
  - 21
    - How many video cards can be used on 1 machine? Currently have a single Radeon HD 3800 (3 outputs on 1 card) and are using both DVI outputs to 2 monitors wile the svideo goes to the TV. Can I add an additional VGA card for a projector? Will the display output to all of these work? If yes, do I need to stick with a Radeon so that Catalyst Control Center will see and control the new video output? Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332090
  - 22
    - Unable to install Realtek drivers ASUS MB - P5GC-MX/1333. XP Professional SP-2. 3+ Terabytes Hard Drive available. 3 gig RAM. I am unable to install Realtek High Definition Audio drivers. The install fails irrespective if I attempt to install from CD included with motherboard or downloaded file from ASUS web site. InstallShield starts then halts and advises Realtek High Definition Audio driver install has failed. InstallShield then closes. Any assistance is appreciated. Thank you. -- daveiosys Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332074
  - 23
    - Strange booting After formatting the HD and adding a new one on my Intel pentium 4 PC I noticed a strange behavior: I need to press any key on the KB to have it boot. Then everything runs fine. Any idea? Thanks, Andrea Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332062
  - 24
    - Delay selecting items in Explorer on external drive When clicking on any item - folder or file - in Windows Explorer for a USB2 external drive, there is a four/five second delay till that item gets highlighted. Happens every time only for one particular external drive. During that time everything is frozen. Except for this delay everything works fine. Do we need to look out for anything? Drive tested free of malware and viruses. Regards and thanks for any insights. Rubicon --------- Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332058
  - 25
    - Trying to recover XP after failed upgrade to SP3 I had my system just the way I wanted it and everything I wanted to do worked. Then I upgraded to SP3. SP3 wouldn't boot and nor would safe mode so I had to "repair" my installation by reinstalling my original SP1 installation disk and installing SP2 over the top of it. Sadly my system is nowhere near the state it was in before. Since SP3 caused this problem and SP3 intransigence in not allowing me to remove it in the usual way has caused a lot of problems that would take me 20 mins to list here ... however A brief list RPC server not working. Now partially fixed DCHP has to be started manually each time I start the machine. NVIDIA driver installation program doesn't recognise NVIDIA Geforce FX5200 card and won't install. I have downloaded 4 different drivers and have the CD driver which will run but still won't fire up the card upon a reboot. Drivers are: 71.89_win2kxp.english 91.31_winxp2kmce_english_whql 169.21_forceware_winxp (US version) 169.21_forceware_winxp (International version) Some programs won't run from links. AVG email detection disabled. Specs: Pentium 4 2.8GHz. 1.25Gb DDR PC2100 Ram I also have Windows 2000 Professional on the computer and that has no trouble booting or recognising the graphics card. Any suggestions? -- Bill Jillians, a dude BJ must be the king idiot here, because I've laughed out loud at his posts. - River (25/11/2007) Tag: dvd combo doesn't work since upgrading to sp3 Tag: 332055

Can someone suggest why my dvd/cd will not recognize any type of disc since I
upgraded to the sp3 service pack? The driver and hardware say they are
running fine but the player will not read any type of disc.

Top

Re: dvd combo doesn't work since upgrading to sp3 by Shenan

Shenan
Thu Jun 05 18:20:17 PDT 2008

davey wrote:
> Can someone suggest why my dvd/cd will not recognize any type of
> disc since I upgraded to the sp3 service pack? The driver and
> hardware say they are running fine but the player will not read any
> type of disc.

Honestly - sounds coincidental.

Can you boot off a bootable CD?

--
Shenan Stanley
MS-MVP
--
How To Ask Questions The Smart Way
http://www.catb.org/~esr/faqs/smart-questions.html

Top

RE: dvd combo doesn't work since upgrading to sp3 by geraldo

geraldo
Sun Jul 06 11:40:00 PDT 2008

I don't know how to put thye start rip on the windows media player 11
"davey" wrote:

> Can someone suggest why my dvd/cd will not recognize any type of disc since I
> upgraded to the sp3 service pack? The driver and hardware say they are
> running fine but the player will not read any type of disc.

Top

Re: dvd combo doesn't work since upgrading to sp3 by Shenan

Shenan
Sun Jul 06 13:17:13 PDT 2008

davey wrote:
> Can someone suggest why my dvd/cd will not recognize any type of
> disc since I upgraded to the sp3 service pack? The driver and
> hardware say they are running fine but the player will not read
> any type of disc.

geraldo feliciano wrote:
> I don't know how to put thye start rip on the windows media player
> 11

How is that in any way related to anything previously posted and/or this
particular newsgroup?

http://www.microsoft.com/windows/windowsmedia/knowledgecenter/easystart/mp11guide.aspx

--
Shenan Stanley
MS-MVP
--
How To Ask Questions The Smart Way
http://www.catb.org/~esr/faqs/smart-questions.html

Top