se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - detect new identifier from embedded excel sheet in word template I have a word template with an embedded excel sheet in it. I use a field to display the text from a cell in the sheet in another place in the word document, using the {LINK Excel.Sheet.8 "\\\..path..\\Template.dot" _1135171229!Sheet1!CELLNAME \a \t \* CHARFORMAT { }} Works fine - until I create a new document from the template and the identifier _1135171229 changes its value. I know how to change the identifier through VBA (as I already do the similar thing with the path and document name, which change too.) My problem is this; I can't find any simple way to get that new identifier from the newly created document! Is there any fast and simple way to do that? Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110716
  - 2
    - BUG ScaleHieght and ScaleWidth Alway return 0 For Inline Spreadshe I believe that there may be a bug in Word 2007 related to the ScaleHeight and ScaleWidth of an Inline OLE EXCEL spreadsheet. The issue is that the ScaleWidth and the scale heigh always return 0. Step to reproduce this issue include Open Word 2007 Paste any EXCEL spreadsheet an Microsoft Excel Office Worksheet Object Run the VBA CodeBelow Sub TestInlineObject() ActiveDocument.InlineShapes(1).ScaleWidth = 50 MsgBox ActiveDocument.InlineShapes(1).ScaleWidth End Sub Expected Results: The shape width is scaled 50% MsgBox ActiveDocument.InlineShapes(1).ScaleWidth should return 50 Actual Results: The shape width is scaled 50% MsgBox ActiveDocument.InlineShapes(1).ScaleWidth returns 0 THanks, Nathan Lacoff Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110711
  - 3
    - Code in document to place bookmarked data in Outlook subject line I have a Word document that has bookmark fields. I would like data from some of the bookmarks to show in the subject line when I email the document. We are using Office 97. Can this be done with code in the Word document or is it done in Outlook? Thanks in advance Ron Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110709
  - 4
    - error 5560 I have been using a "Clean up Text" template courtesy of this forum for about 18 months, and have just moved to Office 2007. Now getting Error 5560. Don't know if it is coincidental. The stumbling code (even when there is no text for it to clean) is: .Execute Replace:=wdReplaceAll Is there a way forward? Thanks Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110704
  - 5
    - Word 2003 search macro Hi all, In Word 2003, it is possible to write a VBA macro that searches for a string, positions the cursor at the string found, deletes the string, leaving the cursor where the string had been located. Such code might look like this: Selection.Find.ClearFormatting With Selection.Find .Text = "searchstring" .Replacement.Text = "" .Forward = True .Wrap = wdFindContinue .Format = False .MatchCase = False .MatchWholeWord = False .MatchWildcards = False .MatchSoundsLike = False .MatchAllWordForms = False End With Selection.Find.Execute Selection.Delete Unit:=wdCharacter, Count:=1 However, if the string is not found, the macro deletes the character the cursor is resting on at the beginning of the search. What I want to know is if there is a way to test if the string is not found, so that another action can be taken. Such code might look like this: Selection.Find.ClearFormatting ' on not found, go to label NoSuchStringExists With Selection.Find .Text = "searchstring" .Replacement.Text = "" .Forward = True .Wrap = wdFindContinue .Format = False .MatchCase = False .MatchWholeWord = False .MatchWildcards = False .MatchSoundsLike = False .MatchAllWordForms = False End With Selection.Find.Execute Selection.Delete Unit:=wdCharacter, Count:=1 Exit Sub NoSuchStringExists: MsgBox "Sorry, I could not find this string" Regards, Alan Stancliff Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110699
  - 6
    - autonew mailmerge error Dear All, Working with Word 2003 on XP workstaions, I have a template that is being launched from a database application that uses an autonew macro. I want it to create a new document and do a mailmerge automatically. When I manually run the "RunMerge" sub that I created (after the autonew macro has completed and a new "Document 1" with the merge fields on it is on the screen, the merge completes successfully. However, if I include the code for the mailmerge in my autonew macro, it always fails. In the many permutations I've tried, I most frequently get an error message that says that the object or property doesn't exist, even though I've also produced an error that suggested the new document wasn't an acceptable main merge document. I've set a reference to the MSWORD.olb and provided a fully qualified name for the code. Is this a known problem of some sort? Any thoughts about other good places to look? Thnaks, Ridge (in New Joisey) Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110697
  - 7
    - Disabling click and change events in form initialize Hi, As with all user forms, if you set the value or state of a control in the initialize macro, then the corresponding _click or _change event macro will fire. I am looking for a way to disable this. I want to set the state and values of controls without firing these macros until after the initialize macro is done and the form is displayed. Is there a way to do this? Thanks, Peter Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110695
  - 8
    - Customize the Quick Access toolbar through a Word 2007 macro I am trying to write a macro to customize the Quick Access Toolbar when a Word 2007 document gets the focus and remove it when the document looses the focus. This way only the document that I put the macro into can use it and it is easy for the user to find it. Thanks for any help. Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110692
  - 9
    - Creating Excel Spreadsheet in Word with VBA Kind of a stupid question. Is it possible to create/embed an excel spreadsheet into a word document with VBA? I can just create a regular table and then copy and paste to Excel, but I want to know if there is any better option. Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110689
  - 10
    - How to change the "includeText" field value in the Footer via VB/VBA Hi, Im trying to change the "IncludeText" values in a word document throguh VB (VBA) , I need to change lot of word documents (nearly 500) , I could change the values of the "includtext" fields in the document body using the following ' /// after opened the document lcode = WordDoc.Fields(i).Code If Left(lcode, 12) = " INCLUDETEXT" Then newCode = Replace(lcode, "V:\\", "C:\\") WordDoc.Fields(i).Code.Text = newCode WordDoc.Fields(i).Update End If ' // save and close document and word objects but this code is not changing the "includetext" in the footer.. I dont know how to proceed now..can anyone help me here Thanks Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110686
  - 11
    - Bookmarks in footer - how to edit Hi, Im trying to change the "IncludeText" values in a word document throguh VB (VBA) , I need to change lot of word documents (nearly 500) , I could change the values of the "includtext" fields in the document body using the following ' /// after opened the document lcode = WordDoc.Fields(i).Code If Left(lcode, 12) = " INCLUDETEXT" Then newCode = Replace(lcode, "V:\\", "C:\\") WordDoc.Fields(i).Code.Text = newCode WordDoc.Fields(i).Update End If but this code is not changing the bookmarks or includetext in the footer, I dont know how to proceed now..can anyone help me here Thanks Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110685
  - 12
    - Unable To insert Line Break when selection is in TextBox hi , i am using Word Object Model to insert line break at selection using below statement: applicationObject.Selection.InsertBreak(ref BreakType) where BreakType is defined as object BreakType = MSword.WdBreakType.wdLineBreak; i get an COMException "Command Not available" whenever the current selection is with textBox. (inserted using Insert->TextBox) is anyone aware of alternate way of doing the same? Thanks and Regards, Anita. Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110684
  - 13
    - Disappearing Commandbar buttons [Word 2002/XP] I have a custom command bar with many buttons... but the two most recently added (invoking trivial macros) seem to disappear from the Controls collection even though they are still visually present on the command bar itself... (Word has been restarted since the original customisation) It only seems to happen after the VBA IDE has complained about a compile error though... and all the other buttons are fine... Any ideas? NB - when I say they disappear from the Controls collection I mean that having iterated through all of them they just aren't there anymore, not that e.g. the referencing "name" has been corrupted -- Julian I-Do-Stuff Some Vista stuff, but mostly just Stuff at http://berossus,blogspot.com Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110676
  - 14
    - Creating an Envelop I am trying to create a simple sub to create an envelope. ... Set MyDoc = Wrd.activedocument ' Create new envelopes strAddr = Me.FirstName & " " & Me.LastName & Chr(13) & Me.Address & Chr(13) & Me.City & ", " & Me.RegionID.Column(1) & " " & Me.PostalCode With MyDoc.Envelope .Insert Address:=strAddr, Size:="Size 10" End With ... the code does insert an envelop as section 1 but also leave the original blank doc as section 2. how can I simply get only the envelop without the blank doc section2. I also tried recording a macro to delete section2 but the the envelop revert to an 8.5x11.... Thank you for your help, QB Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110670
  - 15
    - Multiple easy questions. Hello, I would like to know how to: 1) I'm creating a kind of interactive program, what I need to do is to select each word of the document, then for each, select all the characters of the word and then do something with each one of the characters and the go to the next word, until now I have: Sub dfd() Dim oword, ochr As Range Set oword = ActiveDocument.Words For n = 1 To oword.Count oword.Item(n).Select Set ochr = oword.Item(n).Characters For Each ochr In oword 'bla bla bla bla ba Next Next End Sub 2) I would like to create a userform, when the userform is deactivated you are able to correct whatever you want for your document without closing the userform(like the find and replace form, you can change stuff on your document without closing the form) 3) a usrform with 2 bottons, before and next, when the before button is pressed it goes to the last word seleted (or changed) and with the next button it goes to the next word that fill a spesific criteria. Thanks for your help Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110669
  - 16
    - How to change an MS Word document's template before opening? Hi, Does anybody know how to change an MS Word document's assigned template, preferably before the document opens? DSOFile.dll can't do it, and I'm not sure what else that leaves? Any and all pearls of wisdom welcomed and appreciated, Cheers, Al Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110668
  - 17
    - Problem creating Userform Hi - I'm running Word 2000 at work and I'm trying to learn to create a Userform. I've been using the article by Doug Robbins on how to create a Userform and when I code in his example (letter for letter) I get the following error: Compile error: Method or data member not found It seems to be in regards to " .Range_ " in the the line: .Bookmarks("Text1").Range_ Can someone please help me? I'm sure it's a very simple error and one which is probably a simpler over looked area from me. Thanks for you future help.... Darren. Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110665
  - 18
    - Update Textbox1 after combox easy help for beginner! I want only that after I choose in the Combobox1 one value in the textbox1 appear automatically this value! I know it s a stupid question...I'm starting know to work with WBA and so I' reading a lot! Sub MACRO22() UserForm1.Show UserForm1.ComboBox1.RowSource = ThisWorkbook.Worksheets("Foglio1").Range("A1:A3").Address(External:=True) End Sub Private Sub ComboBox1_AfterUpdate() UserForm1.TextBox1.Text = UserForm1.ComboBox1.Value End Sub Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110658
  - 19
    - disable macros in word Hi, I would like to be able to write codes to disable macros in VBA for office word 03 document. I wonder if anyone might be able to guide me on how to do this? Thank you in advance Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110649
  - 20
    - Referencing Bookmarks and Fields Hello I was wondering if there is a way of representing the same bookmark (or field) in multiple places in a word document. I've designed a userform that requires input from the user and places data in appropriate placeholders in a document. For instance, suppose I want a particular phone number (let's say 180 -555-5000) to automatically be inserted into 7 different locations in a document from data extracted from a userform. Must I create 7 different bookmarks/fields in each place I want to see the number represented? I know Wordperfect 9 is capable of inserting the same bookmark with the same data in multiple places so that you avoid creating a new bookmark for the same data. Any thoughts? Thanks. Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110642
  - 21
    - Locating Misspelled words VBA Gerus, Is there a function to locate misspelled words that were identified by Word 2003 & 2007? Thanks. Charlie from Texas Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110638
  - 22
    - Insert {XE "test"}{TC "Test" \l 1} Automation a word report from Access. At run time, I want to be able to insert 2 field type to a company name. One type for a TOC and a second for an index. I'am using a table for an uniform layout. How can I simply insert those field right after the company name in the cell ? Maybe I started all wrong ? Do until rst.eof Set Tbl = Wrd.ActiveDocument.Tables.Add(Wrd.Selection.Range, 8, 2) with Tbl .Cell(1, 1).Range.Text = "Company name :" .Cell(1, 1).Range.Style = wdStyleStrong .Cell(1, 2).Range.Text = rst!CompName 'insert {XE "test"}{TC "Test" \l 1} after the company name... end with wrd.selection.InsertBreak Type:=wdSectionBreakNextPage rst.movenext loop Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110632
  - 23
    - Find page number for each word in document Hi All, I have a Word document for which I'm trying to create an index. I've just started this code, but the idea is to parse through each word and dump out the word and the page number to a CSV file that I can manipulate later on (or dump it to a dictionary object or array or something so I can manipulated it in code). The end result being the 100 least used words in the document should make a halfway decent index. My problem is that I can't figure out how to get the the page number to show up correctly using the following code: Function CreateIndex() Dim fso, NewsFile Set fso =3D CreateObject("Scripting.FileSystemObject") Set File =3D fso.CreateTextFile("c:\book\sampleindex.csv", True) Set objDictionary =3D CreateObject("Scripting.Dictionary") Set colWords =3D Application.ActiveDocument.Words For Each strWord In colWords strWord =3D LCase(strWord) strLetter =3D Left(strWord, 1) If Asc(strLetter) < 97 Or Asc(strLetter) > 122 Then Else ActiveWindow.ScrollIntoView Selection.Range, True intPage =3D Selection.Range.Information(wdActiveEndPageNumber) MsgBox (strWord & "," & intPage) File.WriteLine strWord & "," & intPage End If Next File.Close End Function I'm pretty new to VBA for Word, but I'm not terrible at VBS, so I can sometimes keep up with you =FCber scripters out there. The result of this script is a CSV file that has each word in the document, and the number "1", because wdActiveEndPageNumber always returns a "1". I tried to add the "ActiveWindow.ScrollIntoView" line to scroll to the page, but I have a feeling I'm missing something for that to work. So, any help you guys can offer would be much appreciated. Thanks! Gabe Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110625
  - 24
    - ThisDocument Question I have documents that are created from a template but once they get up into our system get delinked from the template. What I have done is when the document is created it copies all the forms and macros into each document. My question is how do I copy the following macros into ThisDocument? Option Explicit 'reserve memory for an application variable Private WithEvents wdApp As Word.Application Private Sub Document_New() 'assign Word to the application variable If wdApp Is Nothing Then Set wdApp = ThisDocument.Application End If End Sub Private Sub Document_Open() 'assign Word to the application variable If wdApp Is Nothing Then Set wdApp = ThisDocument.Application End If End Sub Private Sub wdApp_WindowSelectionChange(ByVal Sel As Selection) 'quit if active doc isn't attached to this template If ActiveDocument.AttachedTemplate <> ThisDocument Then Exit Sub 'get out of the header if we're in it Select Case Sel.StoryType Case wdFirstPageHeaderStory 'wdPrimaryHeaderStory ActiveWindow.ActivePane.View.SeekView = wdSeekMainDocument frmTable.Show Exit Sub Case Else If Sel.Range.InRange(ActiveDocument.Bookmarks("bktable").Range) Then ActiveDocument.Bookmarks("bkbeforetbl").Select frmTable.Show End If If Sel.Range.InRange(ActiveDocument.Bookmarks("bkProTitle").Range) Then ActiveDocument.Bookmarks("bkbeforetbl").Select frmType.Show End If End Select End Sub Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110623
  - 25
    - Inserting a checkbox using VBA I have a macro in Outlook that will create a word document. I want to insert a checkbox control. objWord.ActiveDocument.Bookmarks("Required").Select objWord.Selection.TypeText CStr(names) basically it select a bookmark, then type in some names. Instead of plain text I want it to be a checkbox with the caption = names. I tried this: objWord.Selection.InlineShapes.AddOLEControl ClassType:="Forms.CheckBox.1" However the checkbox just won't show up. Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110622
- Next
  - 1
    - How to replace OLE in Word? How to see source object in Word? /OLE, please vanish!/ 1) z.B. How to get an underlined blue text and to click on it and to send E-mail INSTEAD OF having this in Word doc: {HYPERLINK "mailto:oat@defgo.ru" }? 2)z.B. How to see real picture instead of reading this: {EMBED MSPhotoEd.3} ? Thank you! Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110620
  - 2
    - GotoBottom Using Word 2003, I have set up a Protected/Unprotected Form Form(set)...The file contains 5 different forms used by the engineering department. All of the forms, with the exception of the first must be able to replicate themselves. The forms are constructed using tables and section breaks as required. At the bottom of each of the forms in the set is a paragraph mark (set to 1.5 points). I am using the small routine (below) as part of the macro to get to the bottom of each page, add a 'page break', and then insert a specific table stored as an autotext entry to create another page in the series. When I record the macro (gotobottom, insert break-page, autotext-add table) the new page is there (bam!). All of the macros for this document are stored in a toolbar for the engineers to use. When I run the macro from the toolbar - the new page is all messed up. The page break is being added in the table above, pushing the balance of the table to the next page along with the addition of the autotext table and a space is added at the top of the original table which also pushes the table further down..... I tried creating a 'dummy' scenario in a blank document and when I initiate the gotobottom by itself, it jumps to the cell marker (outside the table) at the last cell, last row and not to a paragraph mark placed below the table, as I believe it should. If I place two paragraph marks below the table, then the cursor does jump to the first paragraph mark below the table.... can someone please explain what may be happening and how I can correct to get the desired results??? my thanks and best regards, Lenny Sub GotoPgBottom() Dim rTmp As Range Set rTmp = Selection.Bookmarks("\page").Range rTmp.End = rTmp.End - 1 rTmp.Collapse direction:=wdCollapseEnd rTmp.Select End Sub Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110619
  - 3
    - Perform readability statistics Hello, I know that I can get the readability statistics when I execute a grammar check, but is there a way to simply execute the readability statistics without running a complete grammar check. Just run it on the text as is? i am specifically trying to get the Flesch score for a document at the click of a button without any interaction on the behalf of the user. Thank you, QB Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110615
  - 4
    - split repeating table in my form i have repeating table, bind with webservice, receive data from database, data in more than 5000 rows. now i want to split this repeating table in pages, 100 rows per page is this possible without coding??? I use page break in repeating table, but it can't work. thanks -- Message posted via http://www.officekb.com Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110613
  - 5
    - Adding user to word document? Hi, Once I have logged onto my Windows XP machine in work, I was wondering if it was possible to add my user to a word document as soon as it is opened. i.e. I log on as DSmith, could DSmith be inserted into a field in a word document upon open? and if so, how? Appreciate any advice on this. Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110607
  - 6
    - selecting specific text within a cell Office 2003 Pro. I am creating tables in Word and then adding text to these tables and formatting. Qu.1 ------ This example shows 2 bits of text going into one cell. What I want to do is then make "Title text" bold, and I end up always setting the whole cell bold. How should I do this without using an extra row for my title ? Set rng = objWord.ActiveDocument.Tables(intTable).Cell(1, 1).Range rng.Text = "Title text" rng.Text = "Some more text" rng.InsertAfter (strUnit) Qu.2 ------ My table has multiple rows and combination of x1 column or x2 columns: Is it best to create all x1 column and use cell.slit or create all x2 columns and use cell.merge,... or it doesnt matter ? Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110606
  - 7
    - Link to Outlook Contacts I'm wondering if this is possible I'd like to link to an Outlook contact. I know how to grab the information both via MAPI and the address book. However, I'd like to create an updatable link to a specific contact item. Any ideas? Thanks. Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110604
  - 8
    - Word 2003 macro to re-place original clipboard contents I have a WORD 2003 macro that uses the clipboard to do various things. When the macro finishes, the clipboard contains a bit of the stuff the macro put into it. I would like the macro to re-place whatc had originally been in the clipboard. What I would like to have happen is this ****SEMI PSEUDO CODE**************** Sub DummyMacro() ' at beginning of macro copy ' clipboard material into variable Dim myOriginalClipboardVariable as string myOriginalClipboardVariable:= clipboard_contents ' 'Here macro does a bunch of stuff. A 'At the end of the macro, just before exiting 'clear the clipboard clipboard:= "" ' then place stuff that was originally in the clipboard back clipboard := myOriginalClipboardVariable End Sub ******END SEMI PSEUDO CODE********* I realize that this will not work as I have written it, but that's because I am not yet familiar enough with VBA basics. Would anyone mind giving me a hand here? Regards, Alan Stancliff Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110601
  - 9
    - hyperlinks in protected doc I have a table which is protected because it has formfields. I want to put in hyperlinks to a Help file at various points. The only way I've found to do this is to put in unprotected sections where I have the links. This leads to other problems. Any better ideas? Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110599
  - 10
    - Referencing Bookmarks and Fields Hello I was wondering if there is a way of representing the same bookmark (or field) in multiple places in a word document. I've designed a userform that requires input from the user and places data in appropriate placeholders in a document. For instance, suppose I want a particular phone number (let's say 180 -555-5000) to automatically be inserted into 7 different locations in a document from data extracted from a userform. Must I create 7 different bookmarks/fields in each place I want to see the number represented? I know Wordperfect 9 is capable of inserting the same bookmark with the same data in multiple places so that you avoid creating a new bookmark for the same data. Any thoughts? Thanks. Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110593
  - 11
    - VBA code to merge 2 tables I have an authoring software that automatically creates a Word document from text stored in a database. The software allows for VBA code to be run while the Word document is being created. Here's my problem: In one instance, a table is being broken up in 2 pieces with 3 paragraph marks separating the 2 tables. I need the macro to remove the paragraph marks, so that the 2 tables get merged. I have tried researching this in here, but no luck. Any help is appreciated. Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110588
  - 12
    - Built-in properties Hi, I've just found out there is a built-in properties thingy, and I found out that there seem to be 30 of them. However, I had to write some code to list them out (below, in case you need it) and I still don't have definitions of what these properties actually are. It's fairly obvious what most of them are, but what is 'format' for example? The inbuilt help never seems to just give a simple listing of these different options. Why would that be? Here's the code to list them, btw: Sub GetBuiltInDocumentProperties() On Error Resume Next mytext = "" For i = 1 To 255 mytext = mytext & i & " " & ActiveDocument.BuiltInDocumentProperties(i).Name & ":- " & ActiveDocument.BuiltInDocumentProperties(i).Value & vbCrLf Next MsgBox mytext End Sub This lists out properties 1 - 30, but how do I know there isn't a property number 699 (or 6,000,699) for example? Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110587
  - 13
    - Creating Custom Mailing List I want to be able to create a database of my customers and be able to run a program that will print a formatted letter and envelopes to the different customers without having to manually input names and address, what is the best program for this scenario. Thank you Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110580
  - 14
    - Propose save file name Hi. I'm developing an applicaiton, that starts the word, opens a document based on a template and fill some information in it. Then the user can modify this document. If the user wants to save it, the file name in the SaveAs-dialog is "document.doc" The question is: how can I set the proposed name of document by my application? Thanks a lot. Anatoli Rejditsch. Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110577
  - 15
    - Get DropDown Lists in 2007 out of AddIns (Is there a new 2007 board that I should be writing to with this question?) I have written a large program for 2003 (and before). I can create dropdown lists for various selections I need to make, and position them in the toolbar without problem. This is the essential code: Set newlist = mybar.Controls.Add(Type:=msoControlDropdown) For n = 1 To ubound(filenamed) newlist.AddItem filenamed(n) Next newlist.OnAction = "DoStuff" THE PROBLEM: In 2007, the commandbar (list) appears in the AddIns tab. I have created a new tab (called "My Program") that houses other commands regarding the program (so I can at least move those command buttons out of the generic "AddIns" tab). But I cannot figure out how to place the dropdown list into the "My Program" tab. Any ideas? Ed (in VA) Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110574
  - 16
    - opening word 2007 attachmentts Using Office word 2003, how do I open an attahment that is office word 2007? Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110572
  - 17
    - Search for text box formatted to Layout: In line with text Hi. I've managed to set up a macro that hides the content of all text boxes in my document by searching for each text box and setting the contents' font colour to white. However, it only seems to find text boxes that haven't been formatted to 'Layout: In line with text'. Does anybody know way to search for and edit these text boxes as well as the others? Here is the code that I am using: Sub HideAnswers() ' Find each text box and set it's font colour to white Dim aShape As Shape For Each aShape In ActiveDocument.Shapes If aShape.Type = msoTextBox Then aShape.Select Selection.Font.Color = wdColorWhite End If Next End Sub Any help would be really appreciated. Cheers, Dan. Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110571
  - 18
    - embded excel spreadsheet Hi, I tried to embed excel spreadsheet into the word template document but when I try to use macrobutton in this sheet it does not do anything. could somebody tell me why? thanks Peter Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110570
  - 19
    - CALLING EXTERNAL DOCS Hi. How could I call external document to open with macro after selecting macrobutton in userform? I need to have four slightly different templates of document with differencies only in number of active substances what will cause to use of diggerent userforms and different documents. small difference at the beginnign, big difference at the end. could somebody help? Thanks Peter Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110569
  - 20
    - ActiveDocument - AutoOpen Good morning, I am trying to create a macro that will allow me to recall the AutoOpen function of the current document. I have been trying the following with no prevail: From within my Normal.dot file, this one only causes errors. [code] Sub Reset_Document() Application.Run ActiveDocument.ThisModule.ThisProcedure End Sub [/code] and this one does half the job [code] Sub Reset_Document() With ActiveDocument .Reload .ResetFormFields End Sub [/code] and this one only errors [code] Sub Reset_Document() With ActiveDocument .ResetFormFields AutoOpen() End Sub [/code] Now the middle one causes my fields to be cleared, which is nice; but I have some Input boxes that appear when the user opens the document and they do not appear. So my question is: How do I recall the AutoOpen function of my document from a Macro stored in another document? On another note, how do I highlight code? Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110563
  - 21
    - Other groups... Greetings to all, Now that I have a 9-5 desk job, I cannot access the groups with he tools I would like to use. During the last 5 years I was using Outlook Express at home where I used to work as well. Here at the office I am now stuck with Lotus Notes. I tried accessing Usenet with Lotus Notes (It does offer Newsgroup capabilities) and with OE, but I believe the security set up by the IT people at the company is preventing me from making an NNTP connection. So I am using the Web Interface. I am getting accustomed to it. But I noticed that it is called "Word programming." Where are the 5 basic VBA groups I am used to (microsoft.public.word.vba.addins, microsoft.public.word.vba.beginners, microsoft.public.word.vba.customization, microsoft.public.word.vba.general, microsoft.public.word.vba.userforms)? Also, while I was on Google groups, I noticed that there is a group called "microsoft.public.word.vba". I never saw it with OE.... What is it? Was it always around but I just never noticed it thinking it was just a prefix, not an actual group)? Am I correct in asuming that "Word Programing" is in fact "microsoft.public.word.vba.general"? If there is no connection between the Web interface and those 6 groups, how do people, post to those groups? (Presumebly this means that there is no connection betwen Word itself and those 6 groups.) Will I have to use Google to access those groups? Anybody using Google to manage their posts? How is it? Thanks. Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110555
  - 22
    - pictures and W2007 treatment After reading Daiya Mitchell's article "Word Doesn't Know What a Page Is," I wonder if the mailbox treatment that she described (text one one, headers/footers another, floating graphics on another) is still applicable in Word 2007? Here's why I ask. To avoid problems with float over graphics wandering into unwanted places when reflowing text, I have instead placed images into multi column borderless tables as in-line. I do this only when I need to simulate wrapped text. Is this cautionary practice necessary anymore with the new structure of W2007? I have just gotten the 2007 Office Suite and am not XML literate enough to know its impact. Any insights would be appreciated. Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110553
  - 23
    - How to close the template or Document 1 Hi Someone has very kindly helped with some code which I need to ammend in order to be complete but I am not sure how to do it.....I have tried many various possiblities. First thing that happens when a certain document opens is a form appears allowing a user to select a template. This is the code behind one of the buttons on the form. Private Sub CommandButton1_Click() Word.Documents.Add Template:="G:\Template\ent_test.dot" Me.Hide ThisDocument.Close Document1.Close End Sub This works great and opens a new document based on the template closing the original document. This is the code behind the template which fills certain fields with merged data which works perfectly. Sub AutoNew() With ActiveDocument.MailMerge .MainDocumentType = wdFormLetters .OpenDataSource Name:= _ "C:\ENTMRG.DBF", ConfirmConversions:=False .Destination = wdSendToNewDocument .SuppressBlankLines = True With .DataSource .FirstRecord = wdDefaultFirstRecord .LastRecord = wdDefaultLastRecord End With .Execute End With End Sub My only problem is, once the template opens and the macro is run, although a correct document opens, the template or at least a document called Document1 is also open. Ideally, I would like that document to close without saving changes only leaving the document with the merged data open. The reason why is it is giving the user to many options for confusion when closing multiple documents. I hope you understand what I am asking as it is not easy to explain. Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110533
  - 24
    - Open File on ftp site Good afternoon -- I want to set up a command button to open a document sitting on our office ftp site. So, if the file address is ftp://folder/subfolder/document.doc, can someone help me with a code snippet? Thanks in advance. Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110529
  - 25
    - Making a check box that will automatically put in check when click We are making a form that will be filled out on the internet and must have a check box that will put a check mark into the box when clicked on. The directions from "help" are not making it happen. The form has been created and the check boxes added to it, could this be the problem? How to fix? HELP! Tag: se positionner sur un signet =?iso-8859-1?Q?plac=E9?= dans une zone de Tag: 110526

Bonjour,

j'utilise la méthode suivante pour me positionner sur un signet:
signet= "ici"
Set rrange = odoc.Goto(wdGoToBookmark, , , signet)

Ca marche en général très bien... Mais si le signet est dans une zone de
texte (menu insertion/zone de texte), il me dit que le signet n'existe
pas.

En effet, dans word, si j'ouvre le document et fais ctrl-b, le signet
présent dans la zone de texte n'est pas dans la liste.

Il apparait uniquement après avoir cliqué dans la zone de texte.

Quelqu'un pourrait-il me dire comment me positionner si le signet est
dans une zone de texte?

Merci,
Alain

Top

Re: se positionner sur un signet placé dans une zone de texte by Doug

Doug
Mon Feb 25 01:27:42 PST 2008

Assuming that zone de texte is a textbox, using

Dim rrange As Range
Set rrange = ActiveDocument.Bookmarks("ici").Range

will set a rrange to the range of the bookmark (signet?) ici when the
bookmark is located in a textbox.

I trust that your understanding of English is at least as good as my
understanding of French.

Otherwise, you might try posting to microsoft.public.fr.word

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP

"Alain Bourgeois" <brolspam00@skynet.be> wrote in message
news:47C19581.C0A12578@skynet.be...
> Bonjour,
>
>
> j'utilise la méthode suivante pour me positionner sur un signet:
> signet= "ici"
> Set rrange = odoc.Goto(wdGoToBookmark, , , signet)
>
> Ca marche en général très bien... Mais si le signet est dans une zone de
> texte (menu insertion/zone de texte), il me dit que le signet n'existe
> pas.
>
> En effet, dans word, si j'ouvre le document et fais ctrl-b, le signet
> présent dans la zone de texte n'est pas dans la liste.
>
> Il apparait uniquement après avoir cliqué dans la zone de texte.
>
> Quelqu'un pourrait-il me dire comment me positionner si le signet est
> dans une zone de texte?
>
> Merci,
> Alain

Top