can I feed powerpoint from a word document?

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Excel sheets in a Word document I have a Word document that has two seperate embedded Excel sheets in it. How can I get a value from one sheet into the other sheet using VBA? For arguments sake, let's call them sheet1 and sheet2, and I would like a value from sheet1!A1 to be automatically entered in sheet2:A1 once the value in sheet1:A1 is updated. Tag: can I feed powerpoint from a word document? Tag: 109215
  - 2
    - How to designate two open docs as different objects? I have two documents open. It would be a royal pain to have to browse for them; I just have the folders open and open the two docs needed. I need to desginate one document as "doc1" and the other as "doc2" (Both are Dim'd As Document objects.) I tried a bit with a UserForm, but culdn't get it to work. So in my code, I Stop the code, which lets me click in a doc, then F5 in the VBE and Stop again to click in the second doc, then F5 again to run. MsgBox "Click in the first document" Stop Set doc1 = ActiveDocument Set rng1 = doc1.Range(Selection.Range.Start, doc1.Content.End) MsgBox "Click in the second document" Stop Set doc2 = ActiveDocument Set rng2 = doc2.Range(Selection.Range.Start, doc2.Content.End) Is there an easier, more seamless way to do this? Ed Tag: can I feed powerpoint from a word document? Tag: 109213
  - 3
    - Modifying a recorded macro in Word 2003 I began a small project that involved the following steps: 1. Copy a large amount of table data from my health insurer's site. 2. Save the table in a text file to get rid of the table formatting. 3. Copy the resulting text to Word where I could use "Find/Replace" editing to remove redundant data and formatting. 4. Record a macro of all the Find/Replace steps for later use on data updates. 5. Copy results (now a list of tab delimited records) back to a text file. 6. Import text file into an Excel worksheet. All this worked fine, except that when I ran the macro from the keyboard I had to keep pressing the shortcut keys as if the macro was being stepped through the several code segments. Not being very accomplished in writing or recording macros, I don't know how to get the macro to run as a single operation without all the keyboard intervention. Can anyone offer a solution or a link to same? Tag: can I feed powerpoint from a word document? Tag: 109207
  - 4
    - keyboard shortcuts for macros i have assigned a keyboard shortcut (Alt+N,L) to a macro i recorded. i would like to change the key board shortcut and i cant find a way to it? i would be more interested in finding out how to do this without going into writing macros which i am not very good at. thanks, david Tag: can I feed powerpoint from a word document? Tag: 109186
  - 5
    - Word 07 - See Clipboard Contents? Can anyone advise me of a way to see the contents of the Clipboard in Word 2007? I need to see if what's been copied correctly matches a specific instance of data. Thank you! Tag: can I feed powerpoint from a word document? Tag: 109176
  - 6
    - Protect Form code Hi, How do you make the following code Protect only? This code will protect an unprotected form AND unprotect a protected form. I just need it to Protect. Sub ProtectForm() If ActiveDocument.ProtectionType = wdNoProtection Then ActiveDocument.Protect Type:=wdAllowOnlyFormFields, _ NoReset:=True Else ActiveDocument.Unprotect Password:="" End If End Sub Tag: can I feed powerpoint from a word document? Tag: 109174
  - 7
    - How word is started I would like to know if it is posible to determine if how word has been started. I have been tiraling running word across a network when it normally starts it loads a global template which carries all the sub routines needed to do various things built into forms that are produced. However other programs also use word as as a front end for doucuments they contain within them, but because when the load word it takes an long time because it is loading all the routines etc from the globally loaded template. So here is what I would like to do if posible. if word is opened by one of these other programs other than by the icon word doesnt load the template if however its not opened. I have used the following to determine if open by the icon Sub iconstart() ' 'checks to see how word has been launched ' Dim strCommandLine As String 'get the commandline by calling the CmdLinetoString function, which follows strCommandLine = CmdLinetoString(GetCommandLine()) If Len(strCommandLine) <= Len(Chr(34) & Application.Path & _ "\" & "winword.exe" & Chr(34) & " ") Then 'Following only runs if Word was launched from its icon ActiveDocument.Close SaveChanges:=wdDoNotSaveChanges 'closes document without saving End If 'End If End Sub Public Function CmdLinetoString(ByVal lngPtr As Long) As String Dim strReturn As String Dim StringLength As Long 'get the length of the string (not including the terminating null character) StringLength = lstrlen(lngPtr) 'initialize our string so it has enough characters including the null character strReturn = String$(StringLength + 1, 0) 'copy the string we have a pointer to into our new string lstrcpy strReturn, lngPtr 'now strip off the null character at the end strReturn = Left$(strReturn, StringLength) 'return the string CmdLinetoString = strReturn End Function but is there a way of determining which program has opened word????? I am using word 2003 Thanks in anticipation Tag: can I feed powerpoint from a word document? Tag: 109167
  - 8
    - how do I add scripts to my word doc? I would like to add jscript to my Word document. Is this possible? Tag: can I feed powerpoint from a word document? Tag: 109165
  - 9
    - Hide and show components Hi : ) I am build some kinda of reports and I have some information I would like to let the user show if he/she want to see or not. If he/she want to see, he/she will click in image component. But I would like to use the 'same' (visually talkin) component to hide the data. This is a sample: Private Sub Image1_Click() Selection.GoTo What:=wdGoToBookmark, Name:="interfaces_lista" Selection.Find.ClearFormatting With Selection.Find .Text = "" .Replacement.Text = "" .Forward = True .Wrap = wdFindContinue .Format = False .MatchCase = False .MatchWholeWord = False .MatchWildcards = False .MatchSoundsLike = False .MatchAllWordForms = False End With Selection.Tables(1).Select With Selection.Tables(1) With .Borders(wdBorderLeft) .LineStyle = wdLineStyleDashSmallGap .LineWidth = wdLineWidth050pt .Color = 14540253 End With With .Borders(wdBorderRight) .LineStyle = wdLineStyleDashSmallGap .LineWidth = wdLineWidth050pt .Color = 14540253 End With With .Borders(wdBorderTop) .LineStyle = wdLineStyleDashSmallGap .LineWidth = wdLineWidth050pt .Color = 14540253 End With With .Borders(wdBorderBottom) .LineStyle = wdLineStyleDashSmallGap .LineWidth = wdLineWidth050pt .Color = 14540253 End With With .Borders(wdBorderHorizontal) .LineStyle = wdLineStyleDashSmallGap .LineWidth = wdLineWidth050pt .Color = 14540253 End With With .Borders(wdBorderVertical) .LineStyle = wdLineStyleDashSmallGap .LineWidth = wdLineWidth050pt .Color = 14540253 End With .Borders(wdBorderDiagonalDown).LineStyle = wdLineStyleNone .Borders(wdBorderDiagonalUp).LineStyle = wdLineStyleNone .Borders.Shadow = False End With With Options .DefaultBorderLineStyle = wdLineStyleDashSmallGap .DefaultBorderLineWidth = wdLineWidth050pt .DefaultBorderColor = 14540253 End With Selection.Tables(1).Rows.Height = CentimetersToPoints(0.6) Selection.Font.Color = wdColorGray80 Selection.Font.Size = 8 Selection.GoTo What:=wdGoToBookmark, Name:="interfaces" End Sub So, when I click in the icon, a table shows up with some data, and to 'hide' it, I use: Sub interfaces_compact() Selection.GoTo What:=wdGoToBookmark, Name:="interfaces_lista" Selection.Find.ClearFormatting With Selection.Find .Text = "" .Replacement.Text = "" .Forward = True .Wrap = wdFindContinue .Format = False .MatchCase = False .MatchWholeWord = False .MatchWildcards = False .MatchSoundsLike = False .MatchAllWordForms = False End With Selection.Tables(1).Select With Selection.Tables(1) With .Borders(wdBorderLeft) .LineStyle = wdLineStyleSingle .LineWidth = wdLineWidth050pt .Color = wdColorWhite End With With .Borders(wdBorderRight) .LineStyle = wdLineStyleSingle .LineWidth = wdLineWidth050pt .Color = wdColorWhite End With With .Borders(wdBorderTop) .LineStyle = wdLineStyleSingle .LineWidth = wdLineWidth050pt .Color = wdColorWhite End With With .Borders(wdBorderBottom) .LineStyle = wdLineStyleSingle .LineWidth = wdLineWidth050pt .Color = wdColorWhite End With With .Borders(wdBorderHorizontal) .LineStyle = wdLineStyleSingle .LineWidth = wdLineWidth050pt .Color = wdColorWhite End With With .Borders(wdBorderVertical) .LineStyle = wdLineStyleSingle .LineWidth = wdLineWidth050pt .Color = wdColorWhite End With .Borders(wdBorderDiagonalDown).LineStyle = wdLineStyleNone .Borders(wdBorderDiagonalUp).LineStyle = wdLineStyleNone .Borders.Shadow = False End With With Options .DefaultBorderLineStyle = wdLineStyleSingle .DefaultBorderLineWidth = wdLineWidth050pt .DefaultBorderColor = wdColorWhite End With Selection.Tables(1).Rows.Height = CentimetersToPoints(0#) Selection.Font.Color = wdColorWhite Selection.Font.Size = 1 Selection.GoTo What:=wdGoToBookmark, Name:="interfaces" End Sub So, there is some way to use the control to show up the table (code 1), and if the table is show and I click in the control again it hides (code 2)? I tried to hide the component... but I didnÂ´t get sucess. Thanks for any info. Tag: can I feed powerpoint from a word document? Tag: 109162
  - 10
    - Word 2007 Dotm vs. Dot, slow loading of Word Hi, I have a DOT file, it's rather large (3,5MB) but works fine in Word 2003 and Word 2007. The file has lots of functionality, userforms, modules and a custom commandbar and i've already converted it to DOTM (1,5MB) with Custom Ribbon UI instead of the commandbar. The problem is, that the DOTM file ENORMOUSLY slows down Word 2007 startup (the dot-file needs to be in the startup folder). When I just load the old DOT file (exactly the same functionality, but not in the new format) Word 2007 startup speed is fine. But then I cannot have Custom Ribbon UI. Is this a known issue or is there a way to speed up the loading of my DOTM file? I really want to be able to use the Custom Ribbon UI XML. P.S. I know my DOT file maybe should be a real Add-In (VSTO DLL or whatever) but that will not happen soon for many reasons. Tag: can I feed powerpoint from a word document? Tag: 109161
  - 11
    - FormField I have linked text to a FormField on my document and it changes when I manually change the selected item of the FormField. However, when I change the item in a Macro like so it doesn't change the linked text to match: ActiveDocument.FormFields("PortfolioAnalyst").Result = PersonSelected Has anybody ever dealt with this before? Thanks! Tag: can I feed powerpoint from a word document? Tag: 109158
  - 12
    - Help writing a picture formatting macro Hello, I was wondering if you guys could help me. I am trying to write a macro to format a picture I have pasted into a word document. Unfortunately the wrap to text and advanced functions of the format picture tab are not available when writing a macro. I have seen someone here had the same problem and the following code was posted: With myShape .WrapFormat.Type = wdWrapTopBottom .WrapFormat.DistanceTop = InchesToPoints(0.2) .WrapFormat.DistanceBottom = InchesToPoints(0.2) .RelativeHorizontalPosition = wdRelativeHorizontalPositionPage .Left = wdShapeCenter The thing is my requirements are different to this and now matter how I change the code above I can't get it to work. Can anyone help please? I need the options Wrap type = Square Horizontal Alignment = Other and in the advanced options Absolute position 4.23 from the right of the page Absolute position 0.00 below paragraph. I know this is quite complicated and a big ask - but if anyone can help it would be amazing as i have to format pictures according to this layout about 20 times a day as part of my job and a macro would totally help me out. Thanks, Sotiris Tag: can I feed powerpoint from a word document? Tag: 109150
  - 13
    - Protect Form macro errors When I activate the Protect Form function on my templates and then open them via a 3rd party preview screen I get a series of error messages before the macro works. I need to protect the form for the form fields to work and the templates are for a 3rd party system so I cant have these errors appearing. The errors persist with the AutoOpen macro and I cant set up an entry macro as the form needs to be protected for that to happen - a bit of a catch 22!! Any ideas would be appreciated. Tag: can I feed powerpoint from a word document? Tag: 109143
  - 14
    - unlink Footer/Header in VBA Hi, I need your help desperately. I've been trying to get this to work since yesterday but to no avail. I was trying to insert Header/Footer using VBA in word 03. This will involve section breaks insertion into the document. My problem is i think i haven't really put the following code in the right place. Selection.HeaderFooter.LinkToPrevious = Not Selection.HeaderFooter. _ LinkToPrevious Different Sections will have different Header and Footer in the document. Here is my code of inserting a section of "Bibliography" into the document. This might be placed in the middle of the document. Sub InsertBibliography() 'Apply Header for previous section If ActiveWindow.View.SplitSpecial <> wdPaneNone Then ActiveWindow.Panes(2).Close End If If ActiveWindow.ActivePane.View.Type = wdNormalView Or ActiveWindow. _ ActivePane.View.Type = wdOutlineView Then ActiveWindow.ActivePane.View.Type = wdPrintView End If ActiveWindow.ActivePane.View.SeekView = wdSeekCurrentPageHeader Selection.HeaderFooter.LinkToPrevious = Not Selection.HeaderFooter. _ LinkToPrevious Selection.Delete Unit:=wdCharacter, Count:=1 Selection.Delete Unit:=wdCharacter, Count:=1 Selection.Delete Unit:=wdCharacter, Count:=1 Selection.Delete Unit:=wdCharacter, Count:=1 Selection.Delete Unit:=wdCharacter, Count:=1 Selection.Delete Unit:=wdCharacter, Count:=1 Selection.Delete Unit:=wdCharacter, Count:=1 Selection.Delete Unit:=wdCharacter, Count:=1 Selection.Delete Unit:=wdCharacter, Count:=1 Selection.Delete Unit:=wdCharacter, Count:=1 Selection.Delete Unit:=wdCharacter, Count:=1 Selection.TypeText Text:="Header 1" Selection.MoveRight Unit:=wdCharacter, Count:=2 Selection.Delete Unit:=wdCharacter, Count:=1 Selection.Delete Unit:=wdCharacter, Count:=1 Selection.Delete Unit:=wdCharacter, Count:=1 Selection.Delete Unit:=wdCharacter, Count:=1 Selection.Delete Unit:=wdCharacter, Count:=1 Selection.Delete Unit:=wdCharacter, Count:=1 Selection.Delete Unit:=wdCharacter, Count:=1 Selection.Delete Unit:=wdCharacter, Count:=1 Selection.Delete Unit:=wdCharacter, Count:=1 Selection.Delete Unit:=wdCharacter, Count:=1 Selection.Delete Unit:=wdCharacter, Count:=1 Selection.Delete Unit:=wdCharacter, Count:=1 Selection.Delete Unit:=wdCharacter, Count:=1 Selection.Delete Unit:=wdCharacter, Count:=1 Selection.Delete Unit:=wdCharacter, Count:=1 Selection.Delete Unit:=wdCharacter, Count:=1 Selection.TypeText Text:=vbTab & vbTab & "Date Issue" Selection.MoveDown Unit:=wdLine, Count:=1 Selection.MoveLeft Unit:=wdCharacter, Count:=16 Selection.Delete Unit:=wdCharacter, Count:=1 Selection.Delete Unit:=wdCharacter, Count:=1 Selection.Delete Unit:=wdCharacter, Count:=1 Selection.Delete Unit:=wdCharacter, Count:=1 Selection.Delete Unit:=wdCharacter, Count:=1 Selection.Delete Unit:=wdCharacter, Count:=1 Selection.Delete Unit:=wdCharacter, Count:=1 Selection.Delete Unit:=wdCharacter, Count:=1 Selection.Delete Unit:=wdCharacter, Count:=1 Selection.Delete Unit:=wdCharacter, Count:=1 Selection.Delete Unit:=wdCharacter, Count:=1 Selection.Delete Unit:=wdCharacter, Count:=1 Selection.Delete Unit:=wdCharacter, Count:=1 Selection.Delete Unit:=wdCharacter, Count:=1 Selection.Delete Unit:=wdCharacter, Count:=1 Selection.Delete Unit:=wdCharacter, Count:=1 ActiveWindow.ActivePane.View.SeekView = wdSeekMainDocument Selection.InsertBreak Type:=wdSectionBreakNextPage 'Selection.InsertBreak Type:=wdPageBreak Selection.TypeText Text:="Bibliography" Selection.MoveLeft Unit:=wdCharacter, Count:=12, Extend:=wdExtend Selection.Font.Color = wdColorGreen Selection.Font.Bold = wdToggle Selection.Font.Size = 16 Selection.MoveRight Unit:=wdCharacter, Count:=1 Selection.TypeParagraph Selection.Font.Size = 12 Selection.Font.Color = wdColorAutomatic 'Apply Header for Bibliography If ActiveWindow.View.SplitSpecial <> wdPaneNone Then ActiveWindow.Panes(2).Close End If If ActiveWindow.ActivePane.View.Type = wdNormalView Or ActiveWindow. _ ActivePane.View.Type = wdOutlineView Then ActiveWindow.ActivePane.View.Type = wdPrintView End If ActiveWindow.ActivePane.View.SeekView = wdSeekCurrentPageHeader 'Selection.HeaderFooter.LinkToPrevious = Not Selection.HeaderFooter. _ LinkToPrevious Selection.TypeText Text:="Company Name" Selection.MoveLeft Unit:=wdCharacter, Count:=11, Extend:=wdExtend With ActiveDocument.Bookmarks .Add Range:=Selection.Range, Name:="clientname" .DefaultSorting = wdSortByName .ShowHidden = False End With Selection.MoveRight Unit:=wdCharacter, Count:=1 Selection.TypeText Text:=vbTab & vbTab & "Report Line1" Selection.MoveLeft Unit:=wdCharacter, Count:=12, Extend:=wdExtend With ActiveDocument.Bookmarks .Add Range:=Selection.Range, Name:="reportline1" .DefaultSorting = wdSortByName .ShowHidden = False End With Selection.MoveRight Unit:=wdCharacter, Count:=1 Selection.TypeParagraph Selection.TypeText Text:=vbTab & vbTab & "Report Line2" Selection.MoveLeft Unit:=wdCharacter, Count:=12, Extend:=wdExtend With ActiveDocument.Bookmarks .Add Range:=Selection.Range, Name:="reportline2" .DefaultSorting = wdSortByName .ShowHidden = False End With ActiveWindow.ActivePane.View.SeekView = wdSeekMainDocument 'Apply Footer If ActiveWindow.View.SplitSpecial <> wdPaneNone Then ActiveWindow.Panes(2).Close End If If ActiveWindow.ActivePane.View.Type = wdNormalView Or ActiveWindow. _ ActivePane.View.Type = wdOutlineView Then ActiveWindow.ActivePane.View.Type = wdPrintView End If ActiveWindow.ActivePane.View.SeekView = wdSeekCurrentPageHeader ActiveWindow.ActivePane.View.SeekView = wdSeekCurrentPageHeader If Selection.HeaderFooter.IsHeader = True Then ActiveWindow.ActivePane.View.SeekView = wdSeekCurrentPageFooter Else ActiveWindow.ActivePane.View.SeekView = wdSeekCurrentPageHeader End If Selection.TypeText Text:=vbTab & "Page S" Selection.Fields.Add Range:=Selection.Range, Type:=wdFieldPage Selection.HeaderFooter.LinkToPrevious = Not Selection.HeaderFooter. _ LinkToPrevious With Selection.HeaderFooter.PageNumbers .NumberStyle = wdPageNumberStyleArabic .HeadingLevelForChapter = 0 .IncludeChapterNumber = False .ChapterPageSeparator = wdSeparatorHyphen .RestartNumberingAtSection = True .StartingNumber = 1 End With Selection.MoveUp Unit:=wdLine, Count:=3 Selection.MoveRight Unit:=wdCharacter, Count:=7 Selection.TypeBackspace ActiveWindow.ActivePane.View.SeekView = wdSeekMainDocument End Sub Bibliography Section will have its own Page format in the Footer namely Page S1, Page S2, and so on. Whereas for the content of the doc, Page 1, 2, etc. is used. Greatly appreciate if anyone might be able to give me your advise here. Thank you in advance Tag: can I feed powerpoint from a word document? Tag: 109142
  - 15
    - How to convert word to html with .net I store word docs in a sql2005 database as images. I can retrieve the docs from the database as byte arrays. I need to be able to then save the docs as temporary files on the server in html format. I think I sould be able to use microsoft.office.interop.word to accomplish this but I have no idea how to start. I am using asp.net 2.0 and vb.net. If anyone has any vb ( or c# code that I could use, I would really appreciate it) Tag: can I feed powerpoint from a word document? Tag: 109140
  - 16
    - Saving When I save my 100 page document at say page 50 and then close it and re-open it, it always goes back to the beginning. Is there any way to have it open where you saved it last? Tag: can I feed powerpoint from a word document? Tag: 109139
  - 17
    - How do I calculate the number of checkboxes chosen on a Word form How do I set a calculating text form field to count check box form fields that have been selected? Tag: can I feed powerpoint from a word document? Tag: 109135
  - 18
    - Show today's date Hi! Every day I write a report. In the heder of that report is todya's date. Is there any way that I can write code (or some other way) so that the date in the header is always todays date? Thanks! Tag: can I feed powerpoint from a word document? Tag: 109129
  - 19
    - Get a list of a word document reviewers I would like to write a macro that will display a list of the document reviewers to the macro user for selection. The macro will then be able to jump to the next revision made by the selected reviewer. However, i could not find a simple way of getting the list of reviewers (as appears in the Reviewing tool bar). The only way i could think of, is walking through all revisions and look for the author of each one, but this may take tool long. Any idea? Tag: can I feed powerpoint from a word document? Tag: 109127
  - 20
    - Dynamic userforms Hello, I have created a Word template with a userform attached which appears on-screen for the user to fill-in and subsequently insert information into a letter. The macro which initiates this pop-up userform works great. However, it would be nice to place a date field into the userform that displays the date a developer last made a change to either the macro or userform associated with my template. Essentially, I would like to have a dynamic form in the sense that it displays the date when the template is saved. As you know, changes to macros and forms only take effect when the associated template is saved. I know this feature can be done with Javascript for webpages. Is there something similar under the hood of VBA for Word? Iâ??m trying to take the headache away from the developers so they will not have to manually insert a date each time they save changes to the macro and/or form. Not only would this be invaluable to developers for quality assurance but it would keep the end user informed to updates. Thanks! Ellen Tag: can I feed powerpoint from a word document? Tag: 109126
  - 21
    - Code to remove 'Enter' Symbols I recieve Text files that come from a HTML form and they are delimited by comma. One of the fields allows people to paste in account information that has a set format and adds in TABs and Line breaks or the symbols you get get when you hit enter. I need to scrub this out of file. Is there any little script that I can run in Word that would remove these? THanks! Mark Tag: can I feed powerpoint from a word document? Tag: 109125
  - 22
    - Function shortcut help Hi, I recently saw some VB code and there was a shortcut and I was hoping someone knew what is its correct term. When creating an object that required parameters (or a function), rather than putting blanks or nulls in optional parameters, the code named the param and gave it a value. In other words, if the function was defined as functionName(optionalParam1, optionalParam2, optionalParam3, optionalParam4) it could be called as functionName(optionalParamName3=paramValue3, optionalParamName4=paramValue4) or something like that. I would like to read more about this, but what is it called? Tag: can I feed powerpoint from a word document? Tag: 109117
  - 23
    - Macro to Search for Keyword in Files I'm trying to set up a search for keywords in a specific set of files. I don't want to have to go through and check the multitude of boxes over and over again. Ideally a macro button to execute such a search would be a Godsend. Anybody have any ideas? Thanx. Tag: can I feed powerpoint from a word document? Tag: 109114
  - 24
    - Serial Number Macro Problem with zeroes I use the following macro in Word 2003 to produce sequentially numbered certificates & have 2 problems with it. Sub SEQserialnumber() ' ' SEQserialnumber Macro ' Macro created 11/09/2007 by Sharon ' Dim Counter As Long Dim Message As String, Title As String, Default As String, NumCopies As Long Dim Rng1 As Range ' Set prompt. Message = "Enter the number of copies that you want to print. Get it right you can't stop it!" ' Set title. Title = "Print" ' Set default. Default = "1" ' Display message, title, and default value. NumCopies = Val(InputBox(Message, Title, Default)) ' Edit from Jay Freedman to enable user to specify serial number Message = "Enter the starting serial number" Title = "Serial Number" SerialNumber = Val(InputBox(Message, Title, Default)) 'Next line added to cause Ask field to fire pop-ups ActiveDocument.Fields.Update Set Rng1 = ActiveDocument.Bookmarks("SerialNumber").Range Counter = 0 While Counter < NumCopies Rng1.Delete Rng1.Text = SerialNumber ActiveDocument.PrintOut SerialNumber = SerialNumber + 1 Counter = Counter + 1 Wend 'Recreate the bookmark ready for the next use. With ActiveDocument.Bookmarks .Add Name:="SerialNumber", Range:=Rng1 End With 'Next line added to update { REF SerialNumber } 'This is more selective than just updating all the fields; in 'particular, the Ask fields (which have .Type = wdFieldAsk) won't be 'updated the second time. Dim Fld As Field For Each Fld In ActiveDocument.Fields If Fld.Type = wdFieldRef Then Fld.Update Next ActiveDocument.Close SaveChanges:=False End Sub Problem 1: I know find out that serial numbers begin with zeroes e.g. 0000001 to 0000005. If zeroes are entered they do not print and they must do so to much pre-printed labels. Problem 2: The 2nd serial number instance is not printing. This is a mergefield in the document as below. { REF SerialNumber \*MERGEFORMAT } I would be truly grateful for some help with both of these, thanks. Tag: can I feed powerpoint from a word document? Tag: 109107
  - 25
    - Word Macro opening Mail Merge Template I am attempting to upgrade a Word Macro from Word 2000 that runs as a forground task scheduled via windows scheduler on a unattended server. During the running of the macro it opens a template built for mail merge that latter dynamically attaches to a CSV data source. The issue I am having is that under 2003 opening the templete stops with "Opening this document will run the following SQL command:" goes on to list the CSV data source file path which I believe is a request to attach the data source. I need to suppress this request message. Currently the template is being opened with "Documents.Add Template:=Tmplt, newtemplate:=True, documenttype:=0" The current folder contains the template named in the variable "Tmplt". Suggestions? -- Ron H Tag: can I feed powerpoint from a word document? Tag: 109099
- Next
  - 1
    - Convert Microsoft Word document to jpeg, multi-page TIFF image Website: http://www.joyprinter.com Joy Image Printer is a high-performance virtual printer which enables you to convert any printable document into standard BMP, GIF, JPEG, PNG and TIFF image, and keep the exact look and feel of the original document. Since the converted image has the complete information from the original file without altering characters or fonts, you don't need to install the original software to view the document. Key Features: (1) Installs as a standard Windows printer, works for all Windows applications directly (2) Converts any printable documents like doc, xls, ppt, rtf, html and CAD into images (3) Supports BMP, GIF, PNG, JPEG and TIFF formats (4)Creates Thumbnails for Printing document (5)Dynamic file and folder generation based on macros (6)Supports both single and multi-page TIFF file formats Tag: can I feed powerpoint from a word document? Tag: 109098
  - 2
    - Subroutine Library I am looking foran efficient way to build a subroutine library. I have thought of just using an excel file with a lot of mofules or using access. They each have drawbacks. How are you managing your subroutines? Tag: can I feed powerpoint from a word document? Tag: 109095
  - 3
    - Remove "TEXT" from CommandBar This is what I am using to remove but in this instance it is not suitable - it does not remove it? I use this in 2003/2007 - any help would be appreciated to get "Style" TEXT removed from CommandBar would be appreciated! 'If you want to remove the item from the menu, you can do it like this: Sub RemoveDoStyles() Dim cb As CommandBar Dim ctl As CommandBarControl CustomizationContext = NormalTemplate Set cb = CommandBars("Text") For Each ctl In cb.Controls If ctl.Tag = "Style" Then ctl.Delete End If Next End Sub This is the macro that puts the "Style" TEXT on the CommandBar? Sub DoStyles() Dim StyleCount As Integer Dim J As Integer Dim x As CommandBar, z As CommandBarComboBox On Error Resume Next StyleCount = ActiveDocument.Styles.count Set x = CommandBars.Add("AllMyStyles", msoBarPopup) Set z = x.Controls.Add(msoControlComboBox) z.Caption = "Active Styles:" For J = 1 To StyleCount If ActiveDocument.Styles(J).InUse Then z.AddItem ActiveDocument.Styles(J) End If Next J z.Text = Selection.Style x.ShowPopup Selection.Style = z.List(z.ListIndex) CommandBars("AllMyStyles").Delete End Sub Tag: can I feed powerpoint from a word document? Tag: 109091
  - 4
    - Is word at end of the line When I seach for a word with the code: Selection.Find.ClearFormatting With Selection.Find .Text = " on" .Replacement.Text = "" .Forward = True .Wrap = wdFindContinue .Format = False .MatchCase = False .MatchWholeWord = False .MatchWildcards = False .MatchSoundsLike = False .MatchAllWordForms = False End With Selection.Find.Execute Is there a way to determinine is the word is the last word on that line? I want to certain words to be moved to the next line if they are at the end of a line. Tag: can I feed powerpoint from a word document? Tag: 109087
  - 5
    - assistant goodbye At the beginning of your code, you set isVisible = Assistant.Visible If the end of your code has .Animation = msoAnimationGoodbye ...and then you finish up with Assistant.Visible = isVisible But if the assistant wasn't visible when the user start the code, then this last line does away with the previous line of animation, so that the assistant just disappears. ...is there a way to fix this? Tag: can I feed powerpoint from a word document? Tag: 109085
  - 6
    - Am I at the end of the document In my code I have: Selection.EndKey unit:=wdLine ...this puts me at the end of that line. It's there a way to tell if that is the last line in the document? thanks. Tag: can I feed powerpoint from a word document? Tag: 109082
  - 7
    - Unicode Find Question Can Unicode be used in the range.Find function? In this case, the Cyrillic font word is pasted in a textbox (MS Forms 2.0 library) that a range.Find.execute() routine uses as its Find.Text. How do you assign an entire Unicode word to Find.Text? Word 2003, Windows XP. Tag: can I feed powerpoint from a word document? Tag: 109078
  - 8
    - Formfield Question I have a document and in it there are 35 checkboxes (Formfields). I have a form to edit the document but I canâ??t set the checkboxes in the document as checked/unchecked base on how the form is filled out. How do you write a macro so that if the checkbox in the form is checked/unchecked it will check/uncheck the checkboxes in the document? Tag: can I feed powerpoint from a word document? Tag: 109076
  - 9
    - Supress blank text Using Word 2003 with Windows XP My VBA skills - Fair I have a template which I inherited. It is a monthly activity report for off site workers. The template contains 6 areas for acitivity reporting. Each area has 25 entry possiblities. In the first area - Meeetings - off site employees are required to report the meetings they attended. There is MeetingDate1, followed by MeetingReport1 all the way down to MeetingDate25 and MeetingReport25. What I would like to do is find some way of supressing any of the Meeting fields that are blank when the report prints. Right now, the report prints over 5 pages but most of the time there may be only 10-15 lines of actual text. Tag: can I feed powerpoint from a word document? Tag: 109075
  - 10
    - Copy borders I want to copy all borders of an HTMLDivision object to a selection. The HTMLDivision will be deleted before the copy. What is the best way to do this without doing so for each individual border? Tag: can I feed powerpoint from a word document? Tag: 109074
  - 11
    - Help with Clipboard / moving data Hello, I have a word vba app (word 2003) that has to get a lot of data from the clipboard, then parse it / display some of it. The clipboard data is in a table format, copied from another application that I can not access programmatically and get zero help from the IT dept here. When I copy it onto the clipboard, all of the stuff that I want is in the first table, but it also copies some text and possible a picture file after the table (which I subsequently ignore when parsing the data) Currently, I copy the data onto the clipboard from the other application, then paste it into a new document, then the table/data is read into an array and the sorting etc takes over and every thing is good. The orginal paste is deleted Is there a way to get the table data directly from the clipboard into a multicolumn array? I have only the vaguest idea what a dataobject is in connection to this and how this could be used with the clipboard object, the word help file is pretty slim. Thanks, Jim jimoc@comcast.net Tag: can I feed powerpoint from a word document? Tag: 109067
  - 12
    - Checkboxes I have a template and in it there are 20 checkboxes. I have created a user form to edit the template. How do I save the checkbox info in the form back to the checkboxes in the template? Tag: can I feed powerpoint from a word document? Tag: 109047
  - 13
    - Merging Bookmarks I have a Word 97 form with bookmarks. I have a command button with code that sends the bookmarked data to an Access database. I want to include in the code a way to check Bookmark A. If Bookmark A contains no data, insert the data from Bookmarks B and C into Bookmark A. Thanks for any help you can give me Ron Tag: can I feed powerpoint from a word document? Tag: 109046
  - 14
    - Problem in macro referencing a Com Class built on Dotnet 2.0 Hi Everyone, I am having a hard time working with Com dll with Word 2003. This is my first post in this forum and i desperately need help. I thank you in advance. Scenerio: I created a Com Class in VB.Net 2.0, which has some public properties, functions. I use WebClient in the class to download data. I created the setup using Deployment Wizard containing Test.dll and Test.tlb. I Install it in a test system and reference the Test.tlb in a word Macro. i can create an object of my com class. Set a property with text. Display the property in a msgbox. The Code as follows: Dim obj As New Testproject.TestClass obj.MyStr= "The Macro works" MsgBox (obj.MyStr) Problems: When i run the macro it gives me error as: -2147024894 File or assembly name Testproject, or one of its dependencies, was not found. Regards Rohim Tag: can I feed powerpoint from a word document? Tag: 109045
  - 15
    - Help text not showing Help text that I have added to a form field does not show on the status bar.... so, I tried putting it into the Help key (F1) but the help text does not appear. Any suggestions? Tag: can I feed powerpoint from a word document? Tag: 109042
  - 16
    - Control Color for Multipage pages I am able to set the backcolor for a Multipage, but the individual pages (and their tabs) maintain the color (apparently) of System:ButtonFace. There is no 'BackColor' in the Properties list at the left for the individual pages. Is there a way to control the color of the individual pages, and their tabs. Ed (in Virginia) Tag: can I feed powerpoint from a word document? Tag: 109032
  - 17
    - Changing chemical notation Hello, I have very large documents with chemical formulas and notation (ex. CH4 or H2SO4 but never 3H2O (The three is at the biggining of the word)) I would like to: For each word in the selection (after I selected something) chek if there is a number sticked (and after) the first and or second and or third ...... letter; if so the to change all the numbers in that word to subscript numbers. I dont have any experience working with word VBA (some with excell VBA) thanks a lot Tag: can I feed powerpoint from a word document? Tag: 109030
  - 18
    - Can I Use VBA to register global templates? Does anyone know how to use VBA to write a windows registry key that tells Word where a global template is located? My Problem: I have several workgroup templates that contain references to one global template which contains a ton of code I use again and again from my workgroup templates. As I create the templates, I use "Tools, References" to set the references. At that point I am logged in as myself and my global template is in the default word startup folder (in the user profile). (I want to keep the folder in the default location so I am not affecting other people who may also be programming for Word and expect to put their templates there.) WHAT IS HAPPENING: Several different people may log onto any given computer. As they do, a login script copies their templates into place for them. WHEN THIS HAPPENS, sometimes my reference gets broken. It seems it is not looking to the current startup folder for the global template -- rather it looks to the other person's location. Internet research tells me when Word looks for referenced, it looks in a location listed in a registry key for that template first. I tried using vba to look for broken refs and fix them, but this isn't working because my templates crash with a "can't find project or library" compile error due to other code in them, before they can even run the "fix references" code. I BELIEVE the problem is that the windows registry key for the global templates is still listing the template in the previous users profile and it is either an old version of the template, or not in a "trusted" location and won't load due to macro security. If I could run a line of code in an autoopen macro in my global template that sets that windows registry key to the current users Word startup directory I THINK that would fix the problem. But I have no idea what they key is or how to write to the registry. Sorry so long! Please help...!!!! Tag: can I feed powerpoint from a word document? Tag: 109021
  - 19
    - Macro to make text/field codes superscripted in header/footers. Hello, I want to create a macro that will search the whole document including headers and footers for specified text and then replace with superscripted text. the field codes used are {SUBJECT \*MERGEFORMAT} and {TITLE \*MERGEFORMAT} I found this reference but am not sure how to incorporate the superscript part. http://word.mvps.org/FAQs/Customization/ReplaceAnywhere.htm Does anyone have any advice. I've only used recorded macros and this is my first foray into the macro world. So any advice/guidance is appreciated. Thanks. RenÃ©e Tag: can I feed powerpoint from a word document? Tag: 109019
  - 20
    - clip and copy do not work on toolbar or keyboard I am unable to activate clip and copy toolbar buttons on either my keyboard or the toolbar. The Paste works okay. I have gone into the customize on the Edit menu and tried to correct that way but the changes I make are not retained after I close the customize window. Does anyone have any suggestions. I have just had to install everything as my XP totally crashed and installed XP Office Professional Suite which has Word 2003 etc included. Tag: can I feed powerpoint from a word document? Tag: 109017
  - 21
    - Appending REF Field data to a csv file I'm trying to write a macro to take REF field data in MS Word and save/append that data in a csv file. So far, I've been able to pull the REF field data and put it in a variable named sOutput. (i.e. [sOutput = sInvno & ", " & sDate & ", " & sPartno & ", " & sSerno & ", " & sDesc & ", " & sStatus & vbCr]) The output of this variable outputs each of the data points comma separated. I want to take this data, append it to a csv file and automatically save it without any user interaction. I haven't been able to find any code that can help me. Can somebody help me out? Thanks, Davis Tag: can I feed powerpoint from a word document? Tag: 109011
  - 22
    - Printing contents of a section twice First I am using Word 2003. My macro needs section 2 to be printed twice in a certain order, for example, Client #1, two copies, Client #2, two copies, Client#3, two copies, etc. The number of clients can vary, but the beginning page number in the macro is always Page 2. Then I only need to print 1 copy of Section 1 and one copy each of Sections 3-9. Tag: can I feed powerpoint from a word document? Tag: 109010
  - 23
    - How to "unset" table parameters Hello, I have written two macros for copying and pasting table formats. If the first table does not have a preferred width set, the value is 9999999. The second table may have a preferred width but since I want to make the same as the table copied, I cannot set the preferred width to 9999999 because I get an error. How then do I "unset" this parameter? Also, the preferredwidthtype of the first table does not appear to be wdPreferredWidthAuto. I have a similar problem with cell widths but the width returned is 255919243. I get an error with this one as well. Peter Tag: can I feed powerpoint from a word document? Tag: 109009
  - 24
    - Error closing files and quitting Word 2007 SP1 I'm using C# for Word interop and can't find another newsgroup so here goes. I'm creating an instance of Word 2007 SP1 and successfully loading in a file. However, when I ask it to close all documents, it fails with a COM error of "Command Failed", HRESULT -2146824090. The code I'm using is as follows: // To open the document... // Not included all variables, but should be obvious what they are... object format = WdOpenFormat.wdOpenFormatAuto; this.wordApplication.Documents.Open( ref theFilename, ref missing, ref isReadOnly, ref oFalse, ref missing, ref missing, ref missing, ref missing, ref missing, ref format, ref missing, ref isVisible, ref missing, ref missing, ref missing, ref missing); And to close all documents... object saveChanges = WdSaveOptions.wdDoNotSaveChanges; object missing = System.Type.Missing; this.wordApplication.Documents.Close(ref saveChanges, ref missing, ref missing); When I open another document I get another window for Word which I don't want (all documents must open in the same window). Any suggestions welcome. Thanks. Haydn Tag: can I feed powerpoint from a word document? Tag: 109002
  - 25
    - triggering formfield formatting I have a legal document set up as protected for filling out forms, and some of the field forms have formatting applied to dates & currencies. When I populate the document programmatically, the field formats I need aren't applied until I manually tab through the doc. I tried the code below but it doesn't do the trick. TIA, Eric Private Sub TabThruForm(doc As Word.Document) Dim k As Integer Dim frmFlds As Word.FormFields Set frmFlds = doc.FormFields For k = 1 To frmFlds.Count If k <> frmFlds.Count Then frmFlds(k).Next.Select Next k frmFlds(1).Select End Sub Tag: can I feed powerpoint from a word document? Tag: 108998

I want to build a powerpoint presentation that will be used in many locations
around the world, can I feed a presentation from a word document

Top

Re: can I feed powerpoint from a word document? by Jean-Guy

Jean-Guy
Wed Jan 09 17:59:08 PST 2008

orisons was telling us:
orisons nous racontait que :

> I want to build a powerpoint presentation that will be used in many
> locations around the world, can I feed a presentation from a word
> document

What do you mean by "feed a presentation from a word document"?

How specifically does the fact that the presentation will be viewed in many
locations impact your project?

--

Salut!
_______________________________________
Jean-Guy Marcil - Word MVP
jmarcilREMOVE@CAPSsympatico.caTHISTOO
Word MVP site: http://www.word.mvps.org

Top

Re: can I feed powerpoint from a word document? by orisons

orisons
Wed Jan 09 20:38:01 PST 2008

The text in a powerpoint presentation can be fed from a word document by
opening the word document in powerpoint (I found this out after posting) as
long as the text is formated as "header 1" for the title of a slide, and
bullet points are formated as "header 2" my reasons for this is it is far
easier to translate a word document and import the text than to change each
slide on a presentation.
Thanks for your reply

"Jean-Guy Marcil" wrote:

> orisons was telling us:
> orisons nous racontait que :
>
> > I want to build a powerpoint presentation that will be used in many
> > locations around the world, can I feed a presentation from a word
> > document
>
> What do you mean by "feed a presentation from a word document"?
>
> How specifically does the fact that the presentation will be viewed in many
> locations impact your project?
>
> --
>
> Salut!
> _______________________________________
> Jean-Guy Marcil - Word MVP
> jmarcilREMOVE@CAPSsympatico.caTHISTOO
> Word MVP site: http://www.word.mvps.org
>
>
>

Top