Security and VB References

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Using Distributed Link Tracking to fix Hyperlinks Does anyone have references or experience with using Distributed Link Tracking to fix hyperlinks to documents in your domain. This works for OLE references and short cuts, but it appears not to work automatically for hyperlinks. -- Old Ed Tag: Security and VB References Tag: 105055
  - 2
    - Word VBA refernces to .tlb I have a vs2007 project using created extensibility add-in for Word 2007. As such I must load my dotm file, switch to developer/visual basic (ALT F11), selected references, locate the .tlb file and add it. This all works fine as does the .net code The problem occurs (occasionally) as I make changes to the .net code. Sometimes when I initiate the Word process, I will get a dialog box "could not open macro storage". When I start Word, load the .dotm file, ALT F11 to open VBA and check references, I notice the .net project I am using is listed as missing. It still has a check beside it. I uncheck to project, close references, open references again, locate the project name (it is still in the available refernces - just un checked), recheck the project, save and close the .dotm, I am once again able to use word as expected with the addin functioning correctly This does not happen every time I change the project code. I often transfer the solution and develop on other computers then transfer to solution back to the original development computer. This effort always requires the dropping of the project and then locate anc check it in VBA. I expect this project to be in use for at least 5 years with many changes to the code. I have worked out a deployment scheme that will auto deploy and install the project as users login. The requirment to reload the reference in VBA will be a problem. Is there a registry change that I can record and push back during deployment? Where is the information aboout loaded refences in VBA for Word maintained? How can I inform Word (in an automated way) that the refernce to the .tlb file is valid? Tag: Security and VB References Tag: 105051
  - 3
    - change font size of whole document hello everyone Ihave the following code to change font size. Its not working. Also, how do I deselect the text after executing the code. Selection.WholeStory If Selection.Font.Name = "Tahoma" Then Selection.Font.Size = 15 End If any help will be appreciated thanx ahmed Tag: Security and VB References Tag: 105049
  - 4
    - Userform Coding Problem that I need help with! I'm hoping that someone can help me figure out a coding problem that I SCREWED UP. I had this code in my Microsoft Word VB Editor that you see below. The code worked PERFECTLY until I stupidly tried to edit it without first making a backup. I know, first rule of any work is to make a backup, so I can't believe I forgot to do that. As an FYI, the "code" contained below was interfacing with one of my Excel Workbooks, and allowed me to chose a client name from a dropdown menu (in Excel), and when the name was chosen, Excel would call up a "Word", and the Userform that was created would also open. This would then allow me to input narrative comments into the Userform. As a result of my "editing", I can select a client name (on the Excel Workbook), but "Word" and "The Userform" no longer opens (actually it looks as if it is trying to open, but cannot). If some kind and knowledge person could look at the code below and let me know if you see anything that I am leaving out I'd greatly appreciate it. Dan The Code in the MS Word Sample.doc VB Editor Module Sub UpdateComments(parm1) On Error Resume Next Documents.Open FileName:=parm1 If Not FileExists(parm1) Then ' Check if file/folder exists ..... MsgBox "File " & parm1 & " does not exist", vbOKCancel Exit Sub End If UserForm1.Show vbModeless End Sub _____________________________________________________________________ Function FileExists(fname) As Boolean ' Returns TRUE if the file exists Dim x As String x = Dir(fname) If x <> "" Then FileExists = True _ Else FileExists = False End Function Tag: Security and VB References Tag: 105048
  - 5
    - IF Field breaking bullets Hello, i'm have having a problem in Word 2003 for PC. When I create an IF field as part of a bulleted list, the indent is correct but the bullet is removed. The problem seems to be caused by the carriage return in the result of the IF field. this causes the bullet to be removed on whichever line the field is placed. A few examples follow (? is the bullet point): EXAMPLE 1 ï?§ Bullet 1 { IF "T" = "T" "Bullet 2" "Bullet 3 ï?§ Bullet 4" } ï?§ Bullet 5 Bullet 2,3 and 4 are being inserted by an IF Field and if the condition is true then Bullet 2 is inserted, otherwise Bullet 3 and 4 are inserted. RESULT 1 ï?§ Bullet 1 Bullet 2 ï?§ Bullet 5 however, the problem is that the bullet point for Bullet 2 is removed. EXAMPLE 2 ï?§ Bullet 1 { IF "T" = "F" "Bullet 2" "Bullet 3 ï?§ Bullet 4" } ï?§ Bullet 5 notice that the IF field should display Bullet 3 and 4 now RESULT 2 ï?§ Bullet 1 Bullet 3 ï?§ Bullet 4 ï?§ Bullet 5 in this case Bullet 4 was inserted correctly. but again no bullet for the first one. the perplexing case is when the IF conditional field is inserted after Bullet 1. EXAMPLE 3 ï?§ Bullet 1{ IF "T" = "T" " Bullet 2" " Bullet 3 ï?§ Bullet 4" } ï?§ Bullet 5 this should insert a hard return before Bullet 2. this results in: RESULT 3 Bullet 1 ï?§ Bullet 2 ï?§ Bullet 5 any help would be appreciated Andre' Tag: Security and VB References Tag: 105043
  - 6
    - searching a range Can someone tell me what is wrong with this code? What I am trying to do, is set a range to the first 5 sections of a document. Then I want to find a particular string. If I find it, I want to clear that search and search for something different. However, the search is not working (at all). It is not finding the string that is actually in the document. (I tried changing noticeplus.find to selection.find, which appeared to work. But as I got deeper into the macro, I found that it was not doing what I wanted (It wasn't just searching the range that I set, it was searching the entire document). I know I have done this before and I know it is going to be something simple and stupid, but it just has me stumped at the moment. Thanks for any help. Dim noticeplus as range Selection.HomeKey Unit:=wdStory Set noticeplus = ActiveDocument.Range(Start:=ActiveDocument.Sections(1).Range.Start, End:=ActiveDocument.Sections(5).Range.End) With noticeplus.Find .ClearFormatting .Text = "Electronic" .Replacement.Text = "" .Forward = True .Wrap = wdFindStop End With If noticeplus.Find.Execute("Electronic") = True Then Selection.Collapse 1 Selection.HomeKey Unit:=wdStory Set noticeplus = ActiveDocument.Range(Start:=ActiveDocument.Sections(1).Range.Start, End:=ActiveDocument.Sections(5).Range.End) With noticeplus.Find .ClearFormatting .Text = "in accordance with your contract" .Replacement.Text = "" .Forward = True .Wrap = wdFindStop End With 'Expert if If noticeplus.Find.Execute = True Then Selection.Collapse 1 Selection.HomeKey Unit:=wdStory Tag: Security and VB References Tag: 105036
  - 7
    - An alternative to "Forms" Hi. I'm working with Vista and Word 2007. I'm trying to create some templates for documents. I'd like to be able to have certain locations/spots within the document that I can hit a key, quickly jump to and enter in some information, then hit a key and jump to the next pre-designated location to enter in more information. I realize that a "form" allows this, by tabbing. But it has two problems: 1) It is cumbersome--I find that when I set up a form, from then on the typing within it slows down to an excruciating pace, undoing the time-saving of the quick jump. 2) Forms open in "protected" mode, and in my documents I will not only be entering info in some spots, but I will be modifying info in other locations, so I have to stop and "unprotect" after I've done the "form" part, and it would be easier to just move through the document from top to bottom, jumping to some spots, then stopping and modiying some info in others. At a former workplace, Word had been modified so that when you hit "F9", it would jump to some pre-set spot, which was designated in the template with something like {ASK }. I don't know whether this was a macro with a field, or what. But it met the need I described above--I could jump from spot to spot, enter in new info, then make changes to some of the text that was pre-set. Would anyone know how to achieve this in my current documents? I am advanced at Word features, but not at all knowledgeable about programming. Thanks. dc Tag: Security and VB References Tag: 105034
  - 8
    - I need IS NOT (<>) operand for Font.Name In the sub below I need to make line six return 'true' on any OTHER font that the one listed. I've tried all the normal operands and nothing works. The sub purpose is to replace all fonts with one single font. Thanks, Mike Sub ReplaceFont() With Selection.Find ' Clear all previously set formatting for Find dialog box. .ClearFormatting ' Set font to Find for replacement. .Font.Name = "Arial" ' Clear all previously set formatting for Replace dialog box. .Replacement.ClearFormatting ' Set font to Replace found font. .Replacement.Font.Name = "Times New Roman" ' Don't find or replace any text. .Text = "" .Replacement.Text = "" ' The following parameters must be set as follows ' to find only text formatted for the specified font. ' .Forward = True ' .Wrap = wdFindContinue ' .Format = True ' .MatchCase = False ' .MatchWholeWord = False ' .MatchWildcards = False ' .MatchSoundsLike = False ' .MatchAllWordForms = False End With ' Perform the find and replace. Selection.Find.Execute Replace:=wdReplaceAll End Sub Tag: Security and VB References Tag: 105031
  - 9
    - read xml file with vba i need to read the data in an xml file using vba to store the data in a string. can anyone provide any code samples on doing this? Thanks in advance. Tag: Security and VB References Tag: 105030
  - 10
    - Sequentially number multiple copies of a document IN DUPLICATE (NCR) using a macro My apologies for the long subject line; it's essentially exactly what I am looking for. I copied the example of the macro offered on the MVP site to sequentially number a document and it worked perfectly-I've been tasked with printing out 3,000 of them. The document will be used for Property Management (inventory)control, but now they would like the form printed out in duplicate, on carbonless copy paper. Is there a VBA string that I could apply to the sequential numbering to duplicate a copy of each number? Thanks very much in advance for any help with this. Tag: Security and VB References Tag: 105024
  - 11
    - disigning a form I am designing a fill in document . i want some text fields like name to automatically type into another text field in the latter of the same document once filled in how do i do this? Tag: Security and VB References Tag: 105020
  - 12
    - How can I automatically determine a document idle time & close it I need to write some vba code to determine a specific document's idle time and if its more than 3 minutes it needs to save and close the document without affecting other documents I might be working on. Tag: Security and VB References Tag: 105016
  - 13
    - Problems with Replace Hello, I'm a little bit new to Word VBA. Been working with Excel VBA for a while. I built the following macro to delete text that had the style of "Instructions" applied to it. The idea is for the user to execute this after they're done filling out the document. For the most part, it works well. There are a couple of problems however. If the instructions are immediately followed by a table, inserted JPG, etc. it doesn't delete the preceeding text. It could be a single space, a line of text, whatever. The issue is when the text (styled with "Instructions") immediately preceeds something WITHOUT a hard return, it doesn't get deleted. Please give me some guidance. I appreciate your help. Sub Test2() Dim objDocumentRange As Range Dim strTargetStyle As String Dim strResultText As String strTargetStyle = "Instructions" strResultText = "" Set objDocumentRange = ActiveDocument.Range With objDocumentRange.Find .Style = strTargetStyle .MatchAllWordForms = True .Text = strResultText .Execute Replace:=wdReplaceAll End With End Sub -- Programmer on Budget Tag: Security and VB References Tag: 105002
  - 14
    - Applying a paragraph style SOMEtimes wipes out bold/ital--why? Hi all, This is a very odd problem, much more easily explained with a sample file, which I can email to you if you're interested. Simply put, I'm applying a paragraph style in Word XP (2002) to various paragraphs. The style does not apply or remove bold, italics, or underlines, so I assumed it wouldn't affect those character styles when they're present in the paragraphs I'm styling. Mostly, that's the case, but not always. Which is very confusing to me! There are three basic scenarios, and the third one does NOT act the way I think it should: 1) I apply the style to a "Normal" paragraph with SOME bold or italics. As expected, the bold and italics remain after the style has been applied. 2) I apply the style to a "Normal" paragraph that is ENTIRELY bold, italicized, or both. Word XP seems to treat the bold/ital as a modification of the "Normal" paragraph style ("Normal+Bold", say, for the whole para) instead of being character styles. Therefore, the style I applies wipes out the bold/ital. I guess I can see why that would happen. 3) This is the mystery. I have a row in a two-column table in which one cell is entirely bold and one is not. I merge the two cells, then replace the paragraph mark Word inserts with a tab, so it's all one paragraph. The resulting paragraph consists of non-bold text, then a tab, then bold text. Applying the style to this paragraph wipes out the bold. If I copy and paste this paragraph outside the table, the same thing happens. The end result is a sample file I can send in which there are two paragraphs, one from scenario 1 and one from scenario 3. They both LOOK the same--they're not bold until the last word. But applying the same style to each causes bold to be kept in the first case and dropped in the second. I know that scenario 3 is complicated, but I can't tell why the merging, find-and-replace of the tab, etc. would cause that paragraph to behave strangely. Finally, to conclude this epic post, this is not limited to any particular set of paragraphs--it happens consistently across many hundreds of pages of material. Anyway, the sample file is far easier to understand than this lengthy post, so let me know if you want to see it. Many thanks in advance--I'm afraid I really don't understand the "Paragraph Style + Character Style" issues at all. Ben Tag: Security and VB References Tag: 105001
  - 15
    - Is this possible or am I crazy? Hi Everyone, I work at a telephone call site. Currently we use a freeware program that uses the Net Send command in conjunction with a database that allows us to send instant pop up messages to individuals and preassigned groups of people. The problem I am running into is that every time IT pushes out an update I have to run around to apx 100 machines and reinstall the program. What I am wondering is do any one think it would be possible to convert this to a web page? I am a newbie to Front Page and know enough about Access to make me dangerous. :) I do have a couple of Front Page books to help me if any one thinks this project is even possible. What I visualize is a drop down box to select recipients an input area for the message and a button when clicked would send the message. Any ideas would be greatly appreciated. Have a GREAT day and weekend everyone!!! Deb Tag: Security and VB References Tag: 104999
  - 16
    - "Save-as" to docm format I placed the 'save as' command on my customize toolbar so I could select the default format easily. I also set my default save option to the macro enabled. When I click the customize dropdown and select the default file type, it comes up as a .docx format. I am trying to automate this somewhat to go through a whole series of files and I don't see a batch conversion wizard. -- Del Jackman Civil Engineer Mankato, MN Tag: Security and VB References Tag: 104996
  - 17
    - Convert footnotes to ordinary text Hello, I have a large document with several hundred footnotes. I'm looking for a code to replace the footnote reference with the actual footnote text. Any ideas on where to start? -- Fredrik E. Nilsen Tag: Security and VB References Tag: 104991
  - 18
    - Missing ComboBox Combination Hello I have a User form created is VBA I have a combo box and it does not work below are all the codes for this combobox Private Sub ComboBox2_Change() ' enter value to unload combo box 2 ActiveDocument.FormFields("Text84").Result = ComboBox2.Value Private Sub UserForm_Initialize() ComboBox1.ColumnCount = 1 'Load data into ComboBox ComboBox1.List() = Array("offer", "renew") ComboBox2.List() = Array("New", "Expired", "Scheduled to Expire") ComboBox3.List() = Array("Pricing Specialist", "Senior Pricing Specialist") End Sub Private Sub CommandButton1_Click() With ActiveDocument .Bookmarks("Text71").Range _ .InsertBefore TextBox1 .Bookmarks("Text72").Range _ .InsertBefore TextBox2 .Bookmarks("Text84").Range _ .InsertBefore ComboBox2 .End With UserForm1.Hide When I test the form and I get to the comboBox2 and I select an option I get the error message Run-Time error "5941': The requested member of the collection does not exist. when I click debug the following is highlighted Private Sub ComboBox2_Change() ' enter value to unload combo box 2 ActiveDocument.FormFields("Text84").Result = ComboBox2.Value Please How do I correct this? I have tried to no avail thanks Tag: Security and VB References Tag: 104990
  - 19
    - Master -Sub documents Hi I am trying to create a set of master/subdocuments. The source files are on my network drive. I create the first document, and then goto Outline and insert a subdocument. However when i view this is appearing as a link rather than displaying the doucment itself. if I do the same on my laptop, i can see the subdocument. Can someone tell me what I'm doing wrong? Thanks Alexey Tag: Security and VB References Tag: 104985
  - 20
    - Pathname for IncludeText for server file -network disk IncludeText for Word 2003 needs a pathname to define where the file is. It works well (with the double \\'s) if the file is on the originating PC. Does not work if on Networked Disk. Looking at DocProperties & Explorer, etc. only gives "\\Server\documents\filename But doesn't \Network or something need to be prefixed too ? Or maybe 3 \\\'s or something ? Or maybe C:\\Users\\owner\\Desktop\\Network\\Server\\documents\\filename... ALL examples show as C: ... etc. So maybe C:\Network\Server... or similar ? Tag: Security and VB References Tag: 104980
  - 21
    - Auto Filling Headers I am creating a template for memo's and other transmittals and need to come up with a way to make whatever is written in the subject, project, and date fields at the top of the document to auto populate in the header of each subsequent page. I have a feeling this will be accomplished with bookmarks and REF fields, but beyond that I am completely stumped. Thanks for the help. Tag: Security and VB References Tag: 104977
  - 22
    - Font showing smaller I have this strange problem. Of a set of 5 identical textboxes (there are each other's copies) 2 show a smaller font when the form is active. The font used is Tahoma normal 8pt, but it shows as 6-7pt. Deleting one and copying a correct one does not change this effect. Is looks the same as the 8pt boxes when I change the font to 9pt. I ran the form on mutiple PC's, same result. Can't figure it out. Tag: Security and VB References Tag: 104969
  - 23
    - text box info depending on what is selected in a dropdown Hi there, this is my first post. I have to change my company's letterhead. At the moment it is on a basic word template so the secretary just has to type her boss' name next to the "please ask for" but my boss wants to change it so that each manager's direct dial number is shown underneath their particular name, so i've started a userform but am at a loss for what to do now!! I was wondering if i could create a dropdown or combo box that shows each manager and then depending on whoever gets selected, their individual direct dial will show up in a text box? I have had a scout round the groups but to be honest, i am really not sure how to go about this. Sorry if this has already been asked - as i said, i have searched the groups but cant really see anything. Any help would be most appreciated Tag: Security and VB References Tag: 104964
  - 24
    - Determining length of line Word 2000 I want to use something other than the 3 characters provided as tab leader options. As an old C programmer, I outlined the algorithm I would use, but don't know if VBA has the right methods. If a method could return the 'length' of a line of text using a variable width font and then subtract that from the total length available (left margin to the leader tab), you could then divide that length by the width of my leader character to determine how many to insert. I am just thinking out of the box ;-) I imagine VBA can tell me the number of characters in a line, but for a non-fixed-width font, that won't help. I need it in pixels, or points, inches or some other "real" unit. Then it would need to iterate through each line of the selection and do the actual replacement. Possible? Tag: Security and VB References Tag: 104963
  - 25
    - Creating, Populating, and Using a 2-dimensional array I used to write in VB quite a bit (back in the 90s) but haven't had occasion to write anything in a while. Now I am trying to get my head back in the game. After surmounting the loss of Application.FileSearch with six hours of frustration until I found the Dir() command I thought I would ask a basic question prior to jumping into the frustration again. I have a set of files (143) that I have created using VB and three templates. The files are all named cryptically, for example: A26Checklist.doc A27Studyoutline.doc B01checklist.doc B02checklist.doc B03studyoutline.doc What I would like to do is cycle through the 143 files in the folder, open each one, take the first three characters of the document name, fill a variable with a text string based on the first three characters, do a little searching and replacing with the text string, and then close the document in question. I know how to cycle through the files using Dir(pathname & "*.doc). I know how to use the Mid() command to get my text strings out of the doc.name. I know how to do the searching and replacing once I have the text string in variable. But for some reason my aging brain isn't getting the right code for setting up and populating the array. I tried to get around the question by just creating a giant "Select Case" statement, but unfortunately VB won't let me do that inside of the "For...Next" loop that I wanted to do to go through the Dir()'s. The 3-character names and text strings all are unique: A26 = "EmergencyResponse" A27 = "Board Operation" B01 = "Unit Overview" B02 = "Unit Utilities" B03 = "Tank Gauging" This seems to be a natural two-dimensional array. The question is how do I define it and populate it? Then how do I get VB to give me, for example, "Tank Gauging" for the B03 code? I did a lot of searching in the internet before I thought to come look into Microsoft's online community. So perhaps I am just frustrated and should read all the strings in here. I would appreciate any help. Bill Dannenmaier Tag: Security and VB References Tag: 104961
- Next
  - 1
    - programme fucntioning problems number,x, from cell A3 and a positive integer, n, from cell B3 then returns into cell C3 the value of x raised to the power n divided by n factorial. where x in cell a3 = 2 and n in cell b3 = 5 im using this formula, but when i run it nothing happens, how do i make this vba programme run and return the value? the vba programmes is ok its just no running anything or doing anything to my spreadsheet when i need it to return into cell C3 i think i need to delcare the vaiables, but not sure how to doo it. basically i need help in order for my spreasheet of the numbers x and n to return in cell a3 the value of x raised tot he power n divided by n factorial but nothin is happening in the spreadhseet, can any one tell me or show me how to do this please i really want to do this, but cant this is the vba programme: Public Function MyFunction(X As Double, N As Long) As Variant If (N <= 0&) _ Then MyFunction = "N must be an integer greater than zero" Else MyFunction = (X ^ N) / WorksheetFunction.Fact(N) End If End Function Tag: Security and VB References Tag: 104960
  - 2
    - Word Count Macro I need to write a macro to count words according to my own needs: Any set of characters (A-Z,a-z,0-9) with white space on either side, including first and last word, excluding XHTML tags and hyphens. I'm new to macros and would appreciate any help in doing this. Thanks in advance. Tag: Security and VB References Tag: 104957
  - 3
    - Escape key won't stop me macro! In either Word or Excel, the escape key won't work when my macros are running to break into them. Maybe I've disabled it somehow (but it works for all other purposes). I've got a Toshiba Satellite laptop. Can anyone help? Tag: Security and VB References Tag: 104956
  - 4
    - Create references to template files Hi We currently have a template (add-in) that runs when Word starts. It creates some new menus and shortcuts to other templates. A lot of our templates contain a AutoNew macro which does the same in all the templates. I would like to insert the AutoNew code in one template file and the call the code from all the other files. The only way I can see how to make a reference is in the Visual Basic editor under Tools -> References. But it seems to be a static reference I create, and I want to place the template containing all the macros in each users folder. The big question is....... Is there another way to create the references, i.e. with a function? Best regards Lasse Tag: Security and VB References Tag: 104953
  - 5
    - Changing Page Orientation Within a Document Hi All, Do anyone know that there is any way to change the page orientation within a document, say, page 1 is Landscape and page 2 is Portrait by C# coding?? Thanks. Leo Tag: Security and VB References Tag: 104952
  - 6
    - shortcut or macro for "Paste Unformatted Text" I would like to create either a keyboard shortcut or a macro for Paste>Paste Special>Unformatted Text. The problem I have is that when I get to the command, I cannot stop the macro recorder; hence, when I play the macro it doesn't work. I'd like to do the same thing for "add entry to autocorrect." In Word 2003 I had keyboard shortcuts for both of these and they saved me lots of time. Tag: Security and VB References Tag: 104949
  - 7
    - Checking for the existence of a Macro Here's a curly one for you all! I have a series of standard 'office practice' type templates (Fax, Letter, Memo, etc.) all of which contain code for creating the document in the first place. This code saves the input in document variables to allow the code to be rerun should the user get to the end and realise they forgot something. The rerun code works a treat - or at least it does in the one prototype template that I've done so far. ;) I also have a global 'toolkit' type template that's designed to make doing some key functions easier or just make Word work like it should work: e.g. insert/delete a landscape section without stuffing up everything; apply bullets/numbering using the 'List' styles instead of whatever Word wants to use; copy/reset the standard styles in a document. This works really well, too. But now for the tricky part... I know I could provide access to the rerun macro in each template in a variety of ways: add a custom button a standard toolbar or create a custom toolbar for each template or some such. However, since I'd rather not mess around with any of the standard toolbars (and have my Rerun Template button get lost in the clutter) and since I don't want to create a bunch of 1-button toolbars and since the toolkit already has a custom toolbar, what I'd really rather do is have a button on the Toolkit toolbar for invoking the rerun macro. But I have some concerns and questions. First, as would be expected, if just add a button to the Toolkit toolbar for the rerun macro in a specific template, it only works with a document based on that particular template. And since there are 11 templates, I would have to add 11 buttons and then trust the users (stop LAUGHING!!!) to click the right one or try to trap errors or show/hide buttons based on the attached template for a document... and I don't even want to think about what would happen if there were multiple documents open... GAHHH!!! So I reckon a better approach would be to have a macro (and associated button) in the toolkit template that just calls the rerun macro in the attached template. I can guarantee that the name of the macro in each template would be the same, so that's no problem. However, I'm concerned/unclear about: 1) how to check that the attached template does indeed contain a rerun macro; and 2) the actual syntax for calling the macro in the attached template. Suggestions? Recommendations? Or have I just spent too much time with the sheep and am now delusional to even consider it? -- Cheers! The Kiwi Koder Tag: Security and VB References Tag: 104948
  - 8
    - Drop down list size in a form Hello, I have a form with a drop down list with 63 entries. I found out that the drop down in a form will only accept 25 entries. This is really a very simple form and I was wondering if anyone has a good workaround to get more than 25 entries into a drop down list. Thank you for any help you can provide. Tag: Security and VB References Tag: 104939
  - 9
    - How do I lock the size of a drop down menu inserted in word? I'm a business process SME in my industry, but an intermediate level user of the Office tools. I'm building a mock web interface using Word 2003 and the various forms available. Is there a way to lock the size of a drop down menu I've inserted, (once I've sized it to fit the menu text content) without protecting the entire form (which appears to lock down the entire document) ? Tag: Security and VB References Tag: 104930
  - 10
    - Need Macro to UnBold TOC My TOC is bold and I want it unbold. All my Headings are Character Bold (from another application) so I changed all Heading Styles to be NOT bold so they remain bold. But the TOC stays bold independent of the style definition of bold or not bold. I can manually select the TOC an unbold it but would like a macro to select TOC an unbold it. Thanks Tag: Security and VB References Tag: 104927
  - 11
    - Working with SUBs Kinda new to writing subroutines within VBA. I didn't realize that all the module-level variables declared in the body of the procedure are not available to you in the SUB. I guess I have to pass any that are needed in the SUB, as arguments? Is there another technique? Tag: Security and VB References Tag: 104924
  - 12
    - Macro list drop down Hello, I think this is a really silly question but...I have created a form and within the form I have a text field for which I want to add a macro when a user enters the field. So I clicked on the drop down to pick the macro and I noticed that the way macros are listed makes no sense at all. The macros in normal.dot are for the most part just listed by themselves, i.e. without mentioning the module they're in. But then one of them is listed as <module name>.<macro name>. Some of the other listings sometimes include the name of the template, sometimes not. There seems to be no rhyme or reason to how macros are listed. Could someone clarifiy this for me? Thanks very much. Tag: Security and VB References Tag: 104920
  - 13
    - Stop Printing Hello In a bid for Sustainable working (reducing my companies carbon footprint) i'm trying to limit the amount of printing done on my network. i can block printing using VBA in Excel but i'm scoobied about how to do it in word any ideas ? Tag: Security and VB References Tag: 104918
  - 14
    - Copy commandbar from template to normal.dot Hey, I want to copy a commandbar from my current template to the normal.dot template. This has to happen when the user opens the template, so it has to be done i VBA code. It also have to make a check to see if the commandbar is already in the normal.dot file. I have seached the internet and haven't really found anything that could solve me problem... hope that there is someone in here that has a solution. Mvh Birger Tag: Security and VB References Tag: 104913
  - 15
    - Counting Merged Records Hello, I've been writing a word macro that takes 2 excel files and merges them into 2 different documents. What I am trying to do is to count the Records being merged and display them in a message box. However, where ever I put MsgBox .RecordCount, I get a message box saying -1. The code I am currently using is :- Sub MergeStickers() ' ' MergeStickersMacro ' Macro recorded 3/19/2007 by GOakham ' strFileZ = Format$(Date, "yy-mm ") Const sFILE As String = "Fulfillment" Const sPATH As String = "\\Server\Dir\Dir2\Dir3\" Const sVAR As String = "" Const sVAR2 As String = " UK" ChangeFileOpenDirectory "\\Server\Dir\Dir2\Dir3\" Documents.Open FileName:="New Merge Settings2.doc", ConfirmConversions:=False, ReadOnly:=False, AddToRecentFiles:=False, PasswordDocument:="", _ PasswordTemplate:="", Revert:=False, WritePasswordDocument:="", _ WritePasswordTemplate:="", Format:=wdOpenFormatAuto ActiveDocument.MailMerge.MainDocumentType = wdFormLetters ActiveDocument.MailMerge.OpenDataSource Name:=sPATH & sVAR & _ Format(Now - 1, "dd-mm-yy ") & sFILE & ".csv" _ , ConfirmConversions:=False, ReadOnly:=False, LinkToSource:=True, _ AddToRecentFiles:=False, PasswordDocument:="", PasswordTemplate:="", _ WritePasswordDocument:="", WritePasswordTemplate:="", Revert:=False, _ Format:=wdOpenFormatAuto, Connection:="", SQLStatement:="", SQLStatement1 _ :="", SubType:=wdMergeSubTypeOther With ActiveDocument.MailMerge .Destination = wdSendToNewDocument .SuppressBlankLines = True With .DataSource .FirstRecord = wdDefaultFirstRecord .LastRecord = wdDefaultLastRecord LNewDOC = ActiveDocument.Name End With .Execute Pause:=False End With ' Windows("New Merge Settings 2.doc").Activate ' ActiveWindow.ActivePane.VerticalPercentScrolled = 0 ' Windows(1).Activate 'MsgBox ActiveDocument.Sections.Count & " Pages." 'MsgBox ActiveDocument.MailMerge.DataSource.RecordCount '' ChangeFileOpenDirectory "\\Server\Dir\Dir2\Dir3\" Documents.Open FileName:="New Merge Settings2.doc", ConfirmConversions:=False, ReadOnly:=False, AddToRecentFiles:=False, PasswordDocument:="", _ PasswordTemplate:="", Revert:=False, WritePasswordDocument:="", _ WritePasswordTemplate:="", Format:=wdOpenFormatAuto ActiveDocument.MailMerge.MainDocumentType = wdFormLetters ActiveDocument.MailMerge.OpenDataSource Name:=sPATH & sVAR & _ Format(Now - 1, "dd-mm-yy ") & sFILE & sVAR2 & ".csv" _ , ConfirmConversions:=False, ReadOnly:=False, LinkToSource:=True, _ AddToRecentFiles:=False, PasswordDocument:="", PasswordTemplate:="", _ WritePasswordDocument:="", WritePasswordTemplate:="", Revert:=False, _ Format:=wdOpenFormatAuto, Connection:="", SQLStatement:="", SQLStatement1 _ :="", SubType:=wdMergeSubTypeOther With ActiveDocument.MailMerge .Destination = wdSendToNewDocument .SuppressBlankLines = True With .DataSource .FirstRecord = wdDefaultFirstRecord .LastRecord = wdDefaultLastRecord End With .Execute Pause:=False End With MsgBox "Auto Merge complete.Now put the stickers in the Printer,and press the OK Button", vbInformation, "Phew...Finished" End Sub Any help would be great Tag: Security and VB References Tag: 104909
  - 16
    - possible to copy/fill Bookmarks with VBA dynamically ? Hello! My Problem is, that i have to fill a Word Document(Template) with DataBase Data... I Found out how to set Bookmarks in the Document and correctly fill them with the Data from the DB. Now the question : Is there a way to define Bookmarks in the Template, lets say in one row in a table and fill this table according to the length of my DataBase data ? (Copy the row WITH the Bookmars and add it to the table as many times as i need it) Cheers Martin Tag: Security and VB References Tag: 104907
  - 17
    - manipulating word document one character at a time I'm moving some text around manually in a word doc using some c# (I couldn't find a word.csharp newsgroup, please respond in vba if it makes you feel more comfortable though). Moving characters around a word document one character at a time is extremely slow. Even if the document isn't visible. Can someone offer a suggestion to speeding the below code up? I'm thinking about some sort of way to tell Word to not process events (or something like that) while I'm moving everything one character at a time. Range cellRange = aDoc.Tables.Item(1).Cell(1, 1).Range; object collapseDirection = WdCollapseDirection.wdCollapseStart; for (int i = mergeFields.Characters.Count; i > 0; i--) { string character = mergeFields.Characters.Item(i).Text; if (mergeFields.Characters.ShapeRange.Shapes.Count == 0) { // add this character directly to our range object fieldText = character; // add our field object type = WdFieldType.wdFieldEmpty; cellRange.Collapse(ref collapseDirection); cellRange.Text += character; // remove this character from its original position object unit = WdUnits.wdCharacter; object count = 1; mergeFields.Characters.Item(i).Delete(ref unit, ref count); } } Any help is appreciated Thanks Tag: Security and VB References Tag: 104898
  - 18
    - What's the statement to invoke a macro within the active Word docu The statement for MATLAB invokes a macro that has been defined within the active Excel spreadsheet file is:handle.ExecuteExcel4Macro('!macroname()'),but I can't find the correct statement for MATLAB invokes a macro that has been defined within the active Word document, maybe it is one of word's externatal interface functions as ActiveX Automation Server. please help me. Tag: Security and VB References Tag: 104895
  - 19
    - how to make a check box work I have a fax cover sheet that has marco check box but I cant check or uncheck the boxes. Please help Thanks JWG Tag: Security and VB References Tag: 104894
  - 20
    - smart-tags and hyperlinks I need to be able to process a document and have certain text strings recognized and turned into a hyperlink to launch an external .exe program with that text as a parameter. This doesn't look quite possible with the word hyperlink capability (it adds a "#" between the .exe name and the parameter that isn't processed correctly). Can I do this with smart-tags? Can I write the programs needed for smart-tags in VBA or do I need to learn vb.net to do this? Thanks. Chip Tag: Security and VB References Tag: 104885
  - 21
    - macro to highlight text in carrots Is there a macro that I could use to highlight text in carrots? I would like the dark gray highlighting color. For example, here is a section of the document. <question> <quest>Having a good attitude about school and work and feeling good about what you achieve.</quest> <answer>career wellness</answer> </question> I need everything inside the carrots to be highlighted dark gray. Thanks. Tag: Security and VB References Tag: 104883
  - 22
    - Debug Macro in Word 2007 I have recorded a macro which inserts header & footer & address Autotext entries but when I try to run it bombs on the first line & comes up with error 'Run time error 5941 Requested member of the collection does not exist' My autotext entries are CIMSHeader, CIMSFooter & CIMSAddress - I have no idea what Plain Number 1 is referring to..... I don't know anything about VB so no idea what the problem is and any help much appreciated - code as follows Sub CIMSInvoice() ' ' CIMSInvoice Macro ' ' ActiveDocument.AttachedTemplate.BuildingBlockEntries("Plain Number 1"). _ Insert Where:=Selection.Range, RichText:=True NormalTemplate.BuildingBlockEntries("CIMSHeader").Insert Where:=Selection. _ Range, RichText:=True If ActiveWindow.View.SplitSpecial <> wdPaneNone Then ActiveWindow.Panes(2).Close End If If ActiveWindow.ActivePane.View.Type = wdNormalView Or ActiveWindow. _ ActivePane.View.Type = wdOutlineView Then ActiveWindow.ActivePane.View.Type = wdPrintView End If ActiveWindow.ActivePane.View.SeekView = wdSeekCurrentPageHeader NormalTemplate.BuildingBlockEntries("CIMSHeader").Insert Where:=Selection. _ Range, RichText:=True ActiveWindow.ActivePane.View.SeekView = wdSeekMainDocument ActiveDocument.AttachedTemplate.BuildingBlockEntries("Plain Number 1"). _ Insert Where:=Selection.Range, RichText:=True NormalTemplate.BuildingBlockEntries("CIMSFooter").Insert Where:=Selection. _ Range, RichText:=True WordBasic.ViewFooterOnly NormalTemplate.BuildingBlockEntries("CIMSFooter").Insert Where:=Selection. _ Range, RichText:=True ActiveWindow.ActivePane.View.SeekView = wdSeekMainDocument ActiveDocument.AttachedTemplate.BuildingBlockEntries("Plain Number 1"). _ Insert Where:=Selection.Range, RichText:=True NormalTemplate.BuildingBlockEntries("CIMSAddress").Insert Where:=Selection _ .Range, RichText:=True NormalTemplate.BuildingBlockEntries("CIMSAddress").Insert Where:=Selection _ .Range, RichText:=True ActiveWindow.ActivePane.VerticalPercentScrolled = 0 If ActiveWindow.View.SplitSpecial <> wdPaneNone Then ActiveWindow.Panes(2).Close End If If ActiveWindow.ActivePane.View.Type = wdNormalView Or ActiveWindow. _ ActivePane.View.Type = wdOutlineView Then ActiveWindow.ActivePane.View.Type = wdPrintView End If ActiveWindow.ActivePane.View.SeekView = wdSeekCurrentPageHeader Selection.MoveDown Unit:=wdLine, Count:=3 Selection.TypeBackspace WordBasic.GoToFooter Selection.MoveDown Unit:=wdLine, Count:=4 Selection.TypeBackspace ActiveWindow.ActivePane.View.SeekView = wdSeekMainDocument End Sub Tag: Security and VB References Tag: 104881
  - 23
    - Understanding IncludePicture I have a report that pulls a button image from a specified directory, my command: {includepicture "C\{mergefield inventory#}.jpg \*mergeformat} - this almost works. The two problems that I have are 1) I would like to specify the size of the box that the image is pulled into. These images are all buttons, but when the image is pulled into the document, I have a large box with a small image and now the table is no longer the size that I have created it to be. Is there a way that I can draw a box and import the button image into it?? 2) My other problem is when the report merges, I have to refresh the document to bring in the images? Is this what I expect with a merged report that uses the "includepicture"?? Thanks, Diane Tag: Security and VB References Tag: 104880
  - 24
    - Word x Access PT-BR Pessoal preciso de uma ajuda. Ã? o seguinte, tenho um banco de dados e gostaria de fazer uma mesclagem com um texto, seria o seguinte: Quando eu abro o word eu digito um nome que estÃ¡ cadastradro no banco de dados e o word substitui todos os campos x no texto para com os dados referentes daquele nome no banco de dados. Tem como fazer isso no word? Valeu a ajuda. Tag: Security and VB References Tag: 104879
  - 25
    - Using ActiveDocument.GoTo in a loop I've got a document with 3 table of contents levels and I want to reduce this to 1 level. I know that the table of contents is defined byTC fields in 3 consecutive paragraphs. So I want to replace the TC field in the first paragraph by the new text, delete the TC fields in the next 2 paragraphs, then move on to the next TC field. It's the last part I can't figure out. I can get the contents of the first TC field using: Dim aRange As Range Set aRange = ActiveDocument.GoTo(what:=wdGoToField, Which:=wdGoToFirst, Name:="TC") I can then make the modifications, but how would I move on to the next TC field? I can use: Set aRange = ActiveDocument.GoTo(what:=wdGoToField, Which:=wdGoToNext, Name:="TC") But how can I test if the GoTo was successful? Is there a property of aRange I can use to loop through all the TC fields of the document until all have been modified or deleted? Because I'm going to delete fields, I can't use the "for each fld in activedocument.fields" approach. Any other suggestions? Advance thanks for any help, John Hendrickx Tag: Security and VB References Tag: 104878

I have a sales person who install Office 2007 on there computer. The quoting
software we use uses Word to create order forms. But I need to turn the
Security level to low and go into VB area and check the approraite dll files
under references.

I don't have 2007 and trying to talk over the phone to find them has been
interesting. I can't find the Security Area, I was able to get into the VB
area but the references are grayed out or not available.

So where is the secuity area and how can I make the references available?

Thanks.....

Top

RE: Security and VB References by jeffh13

jeffh13
Mon Sep 10 13:22:13 CDT 2007

Ok I found were to change the macro security...

But I still have to change the References in VB. But the reference option
is greyed out.. Not available...

"JeffH13" wrote:

> I have a sales person who install Office 2007 on there computer. The quoting
> software we use uses Word to create order forms. But I need to turn the
> Security level to low and go into VB area and check the approraite dll files
> under references.
>
> I don't have 2007 and trying to talk over the phone to find them has been
> interesting. I can't find the Security Area, I was able to get into the VB
> area but the references are grayed out or not available.
>
> So where is the secuity area and how can I make the references available?
>
> Thanks.....

Top

RE: Security and VB References by jeffh13

jeffh13
Mon Sep 10 14:22:02 CDT 2007

Thanks anyways...

Found it...

"JeffH13" wrote:

> Ok I found were to change the macro security...
>
> But I still have to change the References in VB. But the reference option
> is greyed out.. Not available...
>
> "JeffH13" wrote:
>
> > I have a sales person who install Office 2007 on there computer. The quoting
> > software we use uses Word to create order forms. But I need to turn the
> > Security level to low and go into VB area and check the approraite dll files
> > under references.
> >
> > I don't have 2007 and trying to talk over the phone to find them has been
> > interesting. I can't find the Security Area, I was able to get into the VB
> > area but the references are grayed out or not available.
> >
> > So where is the secuity area and how can I make the references available?
> >
> > Thanks.....

Top