PAGEREF field help! Please

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - enable option buttons at runtime i have a userform with two listboxes, and six optionbuttions. the options buttons are split into 3 pairs of two. at the outset only the first pair of option buttons is enabled. the following code tests to see if more than one selection is made in a listbox, and if it is, then enables a relevant pair of option buttons. Private Sub Listbox1_change() 'check to see if there is a multiple selection Dim i As Integer Dim Acount As Integer Acount = 0 With Userform1.Listbox1 For i = 0 To .ListCount - 1 If .Selected(i) Then Acount = Acount + 1 End If Next i End With If Acount > 1 Then Userform1.OptionButton5.Enabled = True Userform1.OptionButton6.Enabled = True End If Userform1.Repaint End Sub this code works fine, when i run the code, by stepping through it. In fact i don't need the Userform1.Repaint line, when i run it this way. But the appearance of the userform doesn't change when i run the code normally. Is there some other trick to getting this change to happen? thanks for your help. Tag: PAGEREF field help! Please Tag: 81202
  - 2
    - Re-post Chad, This message refers to a previous post dealing with auto popoulating multiple pages of forms with repetitive info. I am trying to create a single document that has four separate forms. The of the two of the forms use the same information. I form is built on pleading paper. 1. How do I add these forms into one document? 2. I would like to auto populate the two similar for forms. My attempts at this have failed thus far. I also discovered while trying to copy the form built on pleading paper, the vertical lines running the full length of the paper do not transfer. I also discovered that trying to add a new page after this form resulted in the new page being formatted as pleading paper. Any help would be verrrrrrrrrrrry appreciated!!!!!!!! Thank You, mojr Tag: PAGEREF field help! Please Tag: 81200
  - 3
    - Send mouse event in Word? Is there anyway to send a left mouse click event? I just need to have it click down once where my cursor is. The reason behind this is that I am using a webbrowser to display my Word Document and it is losing focus after I insert a bookmark from my ActionsPane. Anyway, is it possible to send a mouse event that way? Thanks! -- Brenda Tag: PAGEREF field help! Please Tag: 81194
  - 4
    - Form Fields & UserForms Interactions HeLp! Great Forums for everthing Office but sometimes there is a lot of reading required when you want to do something that seems simple and to no avail! Here is the issue: Our firm uses templates to create Functional Analsys Documents. The first two pages of the FA Doc have on them two types of form fields. (Hopefully I got all the terminology correct as I am a newbie to this type of programming.) Ones that can be edited by the user and ones that can get updated by refrence when pressing the <F9> function key from within the field. I wanted to simplify this by creating an optional user form that can be called up through a Custom Menu. I have manage to do so but I'm running in to updating the text fields in the user form correctly. The first time I use the user form the defaulted values from the form fields get displayed in the user form correctly. I used the following code when initailizing the user form; Private Sub UserForm_Initialize() With UserForm1 .TextBox2.Text = ActiveDocument.FormFields("Text2").Result .TextBox1.Text = ActiveDocument.FormFields("Text1").Result .TextBox3.Text = ActiveDocument.FormFields("Text6").Result .TextBox4.Text = ActiveDocument.FormFields("Text4").Result .TextBox5.Text = ActiveDocument.FormFields("Text3").Result .TextBox6.Text = ActiveDocument.FormFields("Text5").Result End With End Sub Which I obtained through reading in this forum. I attached the follwoing code to a command button that update the form fields without killing them ( I had some trouble keeping the form fields in tact until once again you forum came to the rescue); Private Sub CommandButton1_Click() With ActiveDocument .FormFields("Text2").Result = TextBox2 .FormFields("Text1").Result = TextBox1 .FormFields("Text6").Result = TextBox3 .FormFields("Text4").Result = TextBox4 .FormFields("Text3").Result = TextBox5 .FormFields("Text5").Result = TextBox6 End With UserForm1.Hide End Sub All runs A-Ok until I change the value on the actual FA Document by clicking on the form field then calling up the user form through the custom menu. The values in the user form recall the previous values that I entered the last time I used the user form. It's as if the user form has a buffer that doesn't get reloaded after the first time the user form is called up. How can I have the user form reflect the changes of the FA Doc fields No mater how menay time the user form is called up? I want to be able to edit these field from either the FA Doc form fields or the new user form but alway displaying the correct values! I have done quite a bit of reading that my eyes a bugging out and can't hurdle this one yet! HeLp! -- Thanks, Bugs Tag: PAGEREF field help! Please Tag: 81187
  - 5
    - how does a check box work? clk'ng on it = nothing ? boswell6@sbcglobal.net <- recently new Tag: PAGEREF field help! Please Tag: 81175
  - 6
    - Word VBA Code Cleaner I've seen several suppliers of Excel VBA Code Cleaners, but none that is focused on Word VBA. Any knowledge/opinions out there? /BosseH Tag: PAGEREF field help! Please Tag: 81174
  - 7
    - track changes and Reviewer (WP) - compatible? I've got WP 12 and use Reviewer (which is Track Changes in WORD). Has anyone been able to view both the Word and WP "changes"? ex. If I Review a document in WP then send it to a Word person for them to Track Changes will they see my WP Reviewer edits? thx. krista Tag: PAGEREF field help! Please Tag: 81164
  - 8
    - Large Document Creation We have created a program in VB & VBA that assists users in creating midsize documents daily. There will be one file for each day anywhere from 3-25 pages in length. We need to combine these documents once a year into one large file to be published into a book. The document is straight text. No images. In the end it will be approximately 1500-2000 pages in length including table of contents and index. We hope to index and do TOC using Word's automated features. Before we attempt this I would like to know any limitations of Word. Can Word handle a document of this size? What do we need to do to prevent file corruption? Are there any special steps we need to take? What is the easiest way to combine all the daily files into one at the end? We looked at Master Docs but read about corruption. Tag: PAGEREF field help! Please Tag: 81163
  - 9
    - Filling in School Dates in Word? Hi all-- I think I've reached the point where I need to program in Word. I teach a class, and my syllabus lists each class number, the day and date, and the assignment. I get tired of manually replacing the dates each semester and would like to do it automatically. This is what I'd like: Class #1 <Day>, <Date> Assignment So if I teach every Tuesday in fall of 2006, I'd like to give it the start and end dates (8/22/06 first day of class, 12/12/06 last day of class) and have it fill in the proper dates for each class throughout the semester. If I were to teach every Monday and Wednesday, I'd like it to fill in everything from 8/21 to 12/13 that semester. To add to the confusion, it would be nice, but maybe not possible, to have it skip spring break holidays or other days off. Maybe I could input which dates classes are canceled and have it adjust accordingly. Am I asking too much? Thanks for any help. --- Peg ladypegasusgarbage@yahoo.garbage.com Take out the garbage!! Tag: PAGEREF field help! Please Tag: 81162
  - 10
    - Word VBA causing my outlook to freeze up. I am having problems with my Outlook freezing when I run macros containing WORD VBA in them. I posted this to the Outlook forum, but the MVP there suggested I try here as it is the Word VBA code that seems to be causing this. Since outlook is set up to use word as my email editor I want to be able to take advantage of macros stored in my Normal.dot template to perform some simple text searches & replacements. After running a macro in an email message window (new messages or replies) , the send button along with every other button/tool on that row of Outlook toolbars (i.e. the Accounts drop-box, the attachment icon, address book button, options, etc.) becomes disabled. I kind of need the SEND button! I click, but nothing happens. The buttons are all dead. They no longer change color when hovered over, or animate, etc. I've tested it on 3 machines at work as well as my computer at home and can replicate it 100% of the time. I have isolated the problem to one Selection.Find statement, but haven't done any exhaustive testing to be sure something else can't trigger it as well. Here's the example: Sub RemovePhone() ' ' RemovePhone Macro ' Macro recorded 2/14/2006 by JG ' Selection.Find.ClearFormatting Selection.Find.Replacement.ClearFormatting With Selection.Find .Text = "^#^#^#-^#^#^#-^#^#^#^#" .Replacement.Text = "" .Forward = True .Wrap = wdFindContinue .Format = False .MatchCase = False .MatchWholeWord = False .MatchWildcards = False .MatchSoundsLike = False .MatchAllWordForms = False End With Selection.Find.Execute Replace:=wdReplaceAll End Sub The last statement in the sub -- the Select.Find -- is the only one that, if commented out or removed, stops the freezing behavior. Any help would be greatly appreciated as this is driving me crazy and slowing me down having to manually replace text in each message. Thanks! Jim (Using Office XP Pro SP3 with windows XP Pro.) Tag: PAGEREF field help! Please Tag: 81161
  - 11
    - Word VBA causing my outlook to freeze up. I am having problems with my Outlook freezing when I run macros containing WORD VBA in them. I posted this to the Outlook forum, but the MVP there suggested I try here as it is the Word VBA code that seems to be causing this. Since outlook is set up to use word as my email editor I want to be able to take advantage of macros stored in my Normal.dot template to perform some simple text searches & replacements. After running a macro in an email message window (new messages or replies) , the send button along with every other button/tool on that row of Outlook toolbars (i.e. the Accounts drop-box, the attachment icon, address book button, options, etc.) becomes disabled. I kind of need the SEND button! I click, but nothing happens. The buttons are all dead. They no longer change color when hovered over, or animate, etc. I've tested it on 3 machines at work as well as my computer at home and can replicate it 100% of the time. I have isolated the problem to one Selection.Find statement, but haven't done any exhaustive testing to be sure something else can't trigger it as well. Here's the example: Sub RemovePhone() ' ' RemovePhone Macro ' Macro recorded 2/14/2006 by JG ' Selection.Find.ClearFormatting Selection.Find.Replacement.ClearFormatting With Selection.Find .Text = "^#^#^#-^#^#^#-^#^#^#^#" .Replacement.Text = "" .Forward = True .Wrap = wdFindContinue .Format = False .MatchCase = False .MatchWholeWord = False .MatchWildcards = False .MatchSoundsLike = False .MatchAllWordForms = False End With Selection.Find.Execute Replace:=wdReplaceAll End Sub The last statement in the sub -- the Select.Find -- is the only one that, if commented out or removed, stops the freezing behavior. Any help would be greatly appreciated as this is driving me crazy and slowing me down having to manually replace text in each message. Thanks! Jim (Using Office XP Pro SP3 with windows XP Pro.) Tag: PAGEREF field help! Please Tag: 81160
  - 12
    - VBA code merge Word doc with Excel data Trying to come up with VBA code from within Excel that will mail merge a MS Word document called NewComerTaxLeads.doc with the opened data sheet called 2006 in a workbook called NewComerTaxLeads.xls. I would really appreciate any & all help you can give me. mikeburg Tag: PAGEREF field help! Please Tag: 81159
  - 13
    - Copying field headers when exporting data I'm creating a VBA script in Access that will take data selected by a basic query, place it in an Excel worksheet, and format the data. I cannot figure out how to take the headers from the fields I select in the query and place them at the top of the Excel sheet. I do not want to hardcode the field names, as this script will be reused on various datasets. Anyone have a suggstion? Thanks, Andrea Tag: PAGEREF field help! Please Tag: 81158
  - 14
    - Command line arguments for "Open and repair" ? Hello, I would like to know if this is possible to open a file with the "Open and Repair" option with some command line argument. It would be something like: Winword Mydoc.doc /[open and repair tag] Thanks Tag: PAGEREF field help! Please Tag: 81155
  - 15
    - Template causes Word to Crash--Recompiling fixes problem We have a fairly sophisticated MS Word template. The last version that we sent to our users gave us a real surprise. Many of our users had Word crash when they opened a document that was based off the Template. Word would give the error that reads something like "couldn't read memory at location xxxxxx to yyyyyyy". It would also crash with the same error when they created new documents based off the template. To fix it, we went to their PC, opened the template, compiled the template, then saved the template. Word worked fine after that. Can anyone offer any general troubleshooting techniques? I don't even know where to begin on what could be causing this. Thanks in advance for the help! Tag: PAGEREF field help! Please Tag: 81150
  - 16
    - macro help I created a macro in bold type, the strange thing is that it only comes out bold every other time! How do I resolve this..Thank you Tag: PAGEREF field help! Please Tag: 81142
  - 17
    - common dialog control in word VBA Hi I have written a macro that pulls data in from an excel sheet and puts it in a word doc. I want to allow the user to select which excel file they want to use by ideally using the common dialog control to allow them to navigate to the file they want. Is there any way of doing this, particularly without using a form to trigger the dialog control. I have had a look round the net and it seems a WinAPI call(s) are required. Any help would be appreciated. Thanks Martin Tag: PAGEREF field help! Please Tag: 81132
  - 18
    - How to copy all textbox content of doc1 to doc2 - and back? In a document, various text boxes with formatted text, even with tables in them, exist. I would like to cut all textbox content in all text boxes and copy it to a second document for editing, and once edited, move the content back to the original textboxes. I have this macro (see below), but it copies (it should cut) and it deletes all formatting and tables. Is there a better way to cut? How do I get the content back to the original textboxes? Shirley Nomey. Sub CopyFromTextBoxes() Dim I As Integer, Boite As Shape, ThisDoc As Document Set ThisDoc = ActiveDocument Documents.Add For Each Boite In ThisDoc.Shapes If Boite.Type = msoGroup Then For I = 1 To Boite.GroupItems.Count With Boite.GroupItems(I).TextFrame If .HasText Then Selection.InsertAfter .TextRange Selection.InsertParagraphAfter Selection.Start = Selection.End End If End With Next Else With Boite.TextFrame If .HasText Then Selection.InsertAfter .TextRange Selection.InsertParagraphAfter Selection.Start = Selection.End End If End With End If Next End Sub Tag: PAGEREF field help! Please Tag: 81131
  - 19
    - putting signature in document I would like to know how to sign a document after completing my work Tag: PAGEREF field help! Please Tag: 81130
  - 20
    - Populating a document form a userform I have a userform which populates an address formfield on a letter, the trouble with it is when the second and subsequent lines are entered then a square precedes the text. Is there anyway that these squares can be removed? To have the userform populates just a bookmark would normally resolve the situation but I have a textbox which needs to be populated which is over a picture and all the text is populated into that unless I use formfields! Any other solutions would be greatly appreciated though. -- Mark Tag: PAGEREF field help! Please Tag: 81126
  - 21
    - Accessing VBA code from external program through Automation Hi, is it possible to extract the VBA source stored in a DOT from an external program using the Word Automation interface? Second, is it possible to alter this source code from an external program? Thanks in advance, Jo Tag: PAGEREF field help! Please Tag: 81124
  - 22
    - Disable X Hi all, is there any way to hide or disable X button (at the top right of the window) to avoid a user to close Word? Thanks in advance. Mauricio Barcelona, Spain Tag: PAGEREF field help! Please Tag: 81122
  - 23
    - range horizontal position on page I am using the Information property with the parameter wdHorizontalPositionRelativeToPage in order to get the position of all the hyperlinks in a document, However, starting with the second page it always return -1. I think because the second page is not on the screen. But how can I get around this? Thanks, Cris Tag: PAGEREF field help! Please Tag: 81121
  - 24
    - Repagination Hello, Well, I have an unusual repagination problem. I understand that background repagination (in Normal View) may be turned off along with the screen updations. Sub MakeAllFast() ActiveWindow.View.Type = wdNormalView ActiveDocument.Repaginate Application.ScreenUpdating = False Application.Options.Pagination = False End Sub Sub MakeAllNormal() Application.ScreenUpdating = True Application.Options.Pagination = True ActiveDocument.Repaginate End Sub I am working on a huge 200 page document which needs automation and I simply call 'MakeAllFast' before the Find and Replace loops and 'MakeAllNormal' after the loops. This works as expected and I do not see the "Word is repaginating ..." message on my computer which runs Microsoft Word 2003. However, the problem occurs when I install the template on Word 2000 based machines. Inspite of ensuring that background pagination is turned off and Normal View is being used, I still keep getting the "Word is repaginating..." message on these computers. I have no idea why. What takes 30 seconds on my computer takes around 6-7 minutes on the other computers that use Word 2000. I thought that background repagination in normal view should work the same in all versions of Word. Can somebody please shed some light on this? I did break the code and ensure that the options.pagination was false and activewindow.view.type was 1 (Normal) on the 2000 machines before the main loop got executed. I still got the "Repagination" message. Thanks a lot for any help. Vince Tag: PAGEREF field help! Please Tag: 81118
  - 25
    - Adding watermark to the document I recorded a macro to insert watermark in a document. The document has multiple sections and different first page and primary headers. Word adds the watermark perfectly but when I run the macro the watermark is not available on many pages and also it is not centered on the page. Has anybody else faced this problem too? Any comments will be appreciated Thanks, Tag: PAGEREF field help! Please Tag: 81112
- Next
  - 1
    - Adding watermark to the document I recorded a macro to insert watermark in a document. The document has multiple sections and different first page and primary headers. Word adds the watermark perfectly but when I run the macro the watermark is not available on many pages and also it is not centered on the page. Has anybody else faced this problem too? Any comments will be appreciated Thanks, Tag: PAGEREF field help! Please Tag: 81111
  - 2
    - msgbox html I have a file "summary.html" that i use as "htmlbody" for sending emails created in html with personal functions. I'd like to show this file as a msgbox. If i open it as an object of filesystem i have as message "<body><Table ..." and so on How can i display the fle html as a messagebox before creating emails? tia, marco Tag: PAGEREF field help! Please Tag: 81108
  - 3
    - VBA vs. VB6? I'm just curious: how similar/different are VBA and Visual Basic 6? I'm more or less functional in VBA at this point and have just seen a job posting where Visual Basic 6 is a "nice to have". I'm wondering if it would be reasonable to cite my experience with VBA as proof that VB6 would not be a big challenge? Or are they totally different animals? -- Rhino Tag: PAGEREF field help! Please Tag: 81104
  - 4
    - Copying a range from excel into word I have an excel sheet in which there are several named ranges. I would like to write a macro to copy the information, create a new word doc and then paste into the new word doc. Do I write it from excel or from word. How do I control the paste function? Tag: PAGEREF field help! Please Tag: 81101
  - 5
    - font color how can i change color for example font.color = wdColorRed for the text i replace? like this Dim rDcm As Range Set rDcm = ActiveDocument.Range With rDcm.Find .Text = strfind .Replacement.Text = strReplace .Execute Replace:=wdReplaceAll .... end with tia Marco Tag: PAGEREF field help! Please Tag: 81097
  - 6
    - Getting to the end of range Hello I use Range object to insert text in paragraphs. when text is inserted, the cursor still stays at the beginning (at the book mark). Set rBMRange = .Bookmarks("P1_WhatYouMightGetBack").Range rBMRange.Text = Trim(rsMYS!para_text) I want to carry on typing more text from database, without having unnecessary bookmarks. How do I get to end of text, and how do I type carriage return (selection.typeparagraph with selection). Tag: PAGEREF field help! Please Tag: 81089
  - 7
    - Error automatically adding bookmarks in Word 2003 Hi, i am having trouble creating a macro that creates a bookmark, then uses the selection as the name. I have written the following macro... Sub AddBookmarkUsingSelection() Dim strSelection40 As String Dim lngBookmarkCount As Long strSelection40 = Left(Replace(Selection, " ", ""), 40) lngBookmarkCount = Application.ActiveDocument.Bookmarks.Count With ActiveDocument.Bookmarks .Add strSelection40, Selection.Range .DefaultSorting = wdSortByLocation .ShowHidden = False End With MsgBox "Bookmark number " & lngBookmarkCount + 1 & " added: " & strSelection40, vbInformation End Sub ... but as soon as i run it, it gets to the '.Add strSelection40, Selection.Range' range then stopps with an error: 5828 - Bad bookmark name. If i analyse the contents of the variable strSelection40 in the Immediate window it confirms that the string contains no blanks. If i then assign the same string value back to the string, the macro runs as required, see Immediate below: ? strSelection40 Mainnut strSelection40 = "Mainnut" Does anyone know a workarround for this? Thanks in advance. Mark Tag: PAGEREF field help! Please Tag: 81088
  - 8
    - Totaling Columns I have a document that i am in the process of formatting, however i need to total up columns of data. I know where the bottom on the data will be and can activate the cell either at the last column with data or the column below this. this action is then repeated within my loop. Can anyone help?? Tag: PAGEREF field help! Please Tag: 81085
  - 9
    - Can i change the Expansion Pack Dyanamically for diff Templates? Hi, I am working on WORD 2003 Smart Document Solutions. I am using Vertigo Managed Smart Document wrapper. Is it possible for me to change the XML Expansion pack dyanamically based on the template i open, If i have multiple templates on the same machine. I want to know if this can be done? Tag: PAGEREF field help! Please Tag: 81084
  - 10
    - Is there a mouseover VBA event I can use to tickle a hot spot comm Good morning and happy VD: In Excel, I can insert a comment into a cell, and excel puts a little red flag in the corner of the cell, and you can mouseover that flag and see the comment. Does anyone know how to make a "hot spot" in word such that when you mouseover a flag, it displays some text not visible otherwise? I already know how to insert comment in word and then do the show-hide trick, but then you see all the junk in the entire document, which is not the behavior we desire. Thanks in advance for any suggestions. -- Ron Ehrlich -- Ron Ehrlich Tag: PAGEREF field help! Please Tag: 81077
  - 11
    - VBS sript to remove menu items Hello, all: We have recently installed ADOBE ACROBAT 7.0. Hard-coded into one of their DLLs is an instruction to add the 'Adobe PDF' and 'Acrobat Comments' menus to the WORD Menu Bar. Short of uninstalling part of the product, there is no way to stop Adobe from adding these menu items. Is it possible to run a simple script that removes the ADOBE menu items when WORD starts up? Or would a macro be better? Right now, I'm manually removing these menu items whenever I start the application. Thanks! Mike Tag: PAGEREF field help! Please Tag: 81073
  - 12
    - Macros disappearing Can someone direct me to an easy to read article on transporting macros with your document. I have written on several occasions about this project and keep getting more frustrated. Latest.... I have a large forms template with many macros in it. When the template is accessed as the basis for a new word document some of the macros disappear. I made sure all of the macros were in the template by going to the organizer and copying them over. Security is set to low and when the form was first created...it worked great. It has however been through several iterations and passed from person to person through email....which I stopped them from doing because I think server rules were stripping the macros. I need to get this project finished and assure the endusers that they will have the macros needed to make the form work. I would appareciate any advice you can give. The endusers will need to email completed forms to each other, because they may use that form with minor content changes as the basis for another study, etc. Tag: PAGEREF field help! Please Tag: 81066
  - 13
    - How to find differences in images while comparing 2 word documents Tag: PAGEREF field help! Please Tag: 81062
  - 14
    - i have a major problem hey i need to get a document that was replaced during saving this project is due 2/16/o6 so i really need ur help Tag: PAGEREF field help! Please Tag: 81055
  - 15
    - cannot activate product? Hi um i was about to activate the office 2003 product when all of a sudden I get this message ( Your installation cannot be activaged because you have activated up to the imit for you product key). i would like to know what they are talking about Help please Thank you. Tag: PAGEREF field help! Please Tag: 81053
  - 16
    - AttachedTemplate is missing...please help me find it! Hey everyone, I am trying to change the AttachedTemplate property of a document using C# and the office2003 PIA. in VBA, the property is there, and no problem using it. in C#, with the referances to the com dll, the document object doesnt have the property! I saw tons of code samples in C# using that property, so I must be doing something wrong. my project does not compile! help! Tag: PAGEREF field help! Please Tag: 81050
  - 17
    - how to run a macro in another active document Is it possible to have a button on my custon toolbar run some code in another document that is open. the other document that has the code is called "Schedule.dot". The code is sub Finder() thanks, ck Tag: PAGEREF field help! Please Tag: 81037
  - 18
    - creating a taskpane Is there any examples of how to create your own taskpane. Is would serve much better than a toolbar for me. I'd like to put some links on it to run different macros. You you customize this new taskpane like changing the font size and color? thanks, ck Tag: PAGEREF field help! Please Tag: 81035
  - 19
    - How do I capitalize the letter following "Mc" or Mac" in a name? Mail merging from an Excel list with names in all caps, some caps and all small. First, used "PROPER" in Excel to convert names to standard initial capital letter, the rest small. How can I then capitalize the letter following "Mc" or "Mac" in Scottish names? Tag: PAGEREF field help! Please Tag: 81034
  - 20
    - VBA access to Header references ? I am writing a macro that translates Word documents to PmWiki format. I want to convert cross-references to internal page links. I find no information about any collection of the existing references. The only information I find is about how to insert new references. Any ideas ? Tag: PAGEREF field help! Please Tag: 81032
  - 21
    - Getting the actual footnote/endnote symbol I am writing a macro to translate Word documents into PmWiki format. I want to get the actual character Word displays for as the footnote or endnote symbol (e.g. *, =87). Does the Footnote/Endnote object have a secret property with this information ? Can I at least access the Word function that returns the symble given the index and format ? TIA Tag: PAGEREF field help! Please Tag: 81030
  - 22
    - Deleting a Macro from a VBS Script I have a large number of documents that have a digitally signed macro in them. I am attempting to mass-delete this macro from the documents. I created a VB Script which searches the given directory, instantiates a Word Object and opens each file one at a time. How do I delete a macro if I have a Word.Document Object and I know the name of the macro? My current VBCode is attached. Thanks in advance for any help. -Jim -------------------Begin Included VB Script----------------- 'Set Type of Files To Act Upon DocumentType="Microsoft Word Document" 'Generate Objects for Filesystem, Folder, and Files within the current folder Set FileSysObj = CreateObject("Scripting.FileSystemObject") Set FileSysFolder = FileSysObj.GetFolder(FileSysObj.GetAbsolutePathName(".")) Set FileSysFiles = FileSysFolder.Files Set Word = CreateObject("Word.Application") Word.Visible = True 'Loop through each File In the Folder For Each ObjFile in FileSysFiles If (objFile.Type = DocumentType) Then Doc_Name = FileSysFolder & "\" & objFile.Name Word.Documents.Open(Doc_Name) 'INSERT CODE TO DELETE MACRO AutoOpen Word.Documents(Doc_Name).Save() Word.Documents(Doc_Name).Close() End If Next Word.Quit --------------------End Included VB Script ------------------------------------ Tag: PAGEREF field help! Please Tag: 81029
  - 23
    - toolbar button running a macro in a different document Is it possible to set the .OnAction property of a toolbar button to run a macro in a different Word document that is open? The Document name is "SP Template" that contains the macro I want to run. thanks, ck Tag: PAGEREF field help! Please Tag: 81026
  - 24
    - Macros have disappeared All my macros have disappeared. When I open the list it is empty and opening VBA it is empty as well. Normal.dot is still in the right place. It will be many hours work creating them all over again. Any suggestions how I might get them back and what the cause might be? Thanks Dudley Tag: PAGEREF field help! Please Tag: 81024
  - 25
    - different letterhead layout I have created a layout for the letterhead of the company I work for. I created it where the logo and address are right aligned. There are also 3 more partner logos below the company logo and address(also right aligned). The logos are seperated from where I want to control where the text goes via a vertical line. I do not want anyone to be able to edit (meaning screw up) the layout when I send it out to the franchises. I know about inserting headers and footers and keeping them behind the text, but about a situation like this? I appreciate your help. Also, the layout is also saved as an indesign file, pdf, and a jpeg. Maybe I can set a background image, but can you do that for print and not only web? Tag: PAGEREF field help! Please Tag: 81019

We are in the process of creating a directory book at work with about 5000
resources in it. Now the problem is: When it originally was merged after hand
tweaking (removing some items, spaces, etc.) it seems it was merged with
errors such as page numbers don't match in the <pageref></pageref> field. My
desparate question is - Is there an easy way to resort the document so that
the PAGEREF fields are corrected?

ie - right now let's say the product Window Pane is on page 45 but the
merged document Table of Contents says it's on page 256 (this is what is in
the tags <pageref></pageref>.
I cannot start from scratch as too many fields have been edited but I'm
going crazy now and need an easy way to correct. PLEASE HELP!
--
Mich

Top

Re: PAGEREF field help! Please by Jezebel

Jezebel
Thu Feb 16 03:37:29 CST 2006

Select the entire document and press F9 to update fields.

"Mich" <mrunaway@msn.com(donotspam)> wrote in message
news:701E62F3-BFA4-4D1D-B92F-BD8C833835C6@microsoft.com...
> We are in the process of creating a directory book at work with about 5000
> resources in it. Now the problem is: When it originally was merged after
> hand
> tweaking (removing some items, spaces, etc.) it seems it was merged with
> errors such as page numbers don't match in the <pageref></pageref> field.
> My
> desparate question is - Is there an easy way to resort the document so
> that
> the PAGEREF fields are corrected?
>
> ie - right now let's say the product Window Pane is on page 45 but the
> merged document Table of Contents says it's on page 256 (this is what is
> in
> the tags <pageref></pageref>.
> I cannot start from scratch as too many fields have been edited but I'm
> going crazy now and need an easy way to correct. PLEASE HELP!
> --
> Mich
>

Top