Creating XLST / Transform File

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Alot of Content Controls in a VSTO Word solution causes CPU max ou I am trying to develop a Word 2007 VSTO solution which contains about 1000 content controls. This sounds like a lot but it is a fairly simple solution with just a lot of repeating data. After deploying the solution I open the document and click inside one of the content controls which causes Word to max out the CPU while it does "something". I wish I knew what the something was so I could fix it. (My guess is that it is binding all the controls but it should not take that long on a superfast computer.) Note that after first click, the document seems to work fine -- navigating to other controls etc. and no CPU problem. This problem is reproducible by simply creating a new VSTO Word 2007 document solution and adding a Plain Text content control and copy/pasting it down in the document 1000 times. Then deploy it. You don't even need to do anything in the customization (add events etc.), just deploy as-is. Below are the results I have seen which shows that the problem gets exponentially worse: 600 Controls (25 pages) Response: 11 seconds 900 Controls (38 pages) Response: 35 seconds 1200 Controls (50 pages) Response: 1 min 20 seconds I would really like to be able to develop this as a Word solution so if somebody has any info on this at all it would be much appreciated. (Please don't respond and tell me to do an InfoPath solution.) Thanks alot, jbstrive Tag: Creating XLST / Transform File Tag: 115151
  - 2
    - Can I make a label blink? Hi, I put a label on an useform. Can I make the words on the label blink regularly? Thanks. Mike Tag: Creating XLST / Transform File Tag: 115149
  - 3
    - Apply "Space Before 18 pt" on all the paragraph immediately following Dear Experts, I would like to achieve the following using Word VBA: I would like to apply an "18 pt space before" to the paragraph immediately following a table. For example: Table cell Table cell Table cell Table cell Table cell Table cell Table cell Table cell Table cell Paragraph immediately following the table (spacing before: 18 pt) The macro should loop through the document and apply this to all occurrences. Help is much appreciated. Thank you very much in advance. Regards, Andreas Tag: Creating XLST / Transform File Tag: 115143
  - 4
    - Apply another font to all text boxes within a canvas or to grouped Dear Experts: Below macro changes all text within text boxes to "arial ,bold, Size 8". So far, so good. This macro is working a. But I also got text boxes within canvasses. How do I have to change the code so that text boxes within canvases also get their font changed to "Arial Bold 8"? b. I also got grouped text boxes in my document. How do I have to change the code so that grouped text boxes also get their font changed to "Arial Bold 8"? Help is much appreciated. Thank you very much in advance. Regards, Andreas Sub ApplyFontToTextBoxes() Dim shp As Word.Shape For Each shp In ActiveDocument.Shapes With shp.TextFrame If .HasText Then .TextRange.Font.Name = "Arial" .TextRange.Font.Size = 8 .TextRange.Bold = True End If End With Next shp End Sub Tag: Creating XLST / Transform File Tag: 115142
  - 5
    - Reference Books Since the GUI in Word 2007 is drastically different than that of Word 2003, I was wondering whether there's a book that described the differences. Tag: Creating XLST / Transform File Tag: 115140
  - 6
    - VBA - Word 2002 form | auto-SUM function for bookmarked table cell I've created a protected Word 2002 form that allows users to enter data into text fields. This form will then be printed out and turned in. I want to SUM 2-3 table cells that are bookmarked income_1, income_2, etc... and display the result in a TOTAL cell below the values. I can use a Word SUM Function to SUM the bookmarked values, but I have to update that manually. This form is for others, so I would like the SUM function to happen automatically. Is there VBA code to automatically SUM the values in the cells bookmarked income_1, income_2, etc...? And display it in another cell? I thought maybe it could be a BookMark-Change event that will fire the Macro. Or maybe I could put a button in the form that says "Calculate" and then that would fire the manual "update" function via VBA code. I hope you understand what I am asking. Tag: Creating XLST / Transform File Tag: 115137
  - 7
    - VBA - totally disable Enter Key in Word Form? Keypreview in Word? FIRST, I've read the MS KB article on how to insert 4 macros into a word form to make the enter key act as a tab, and that is not the answer I need. I want to keep the conditional formatting in my data-entry table cells in my Word form. I see a lot of questions that ask this, but none that seem to ask/answer this specific question. I want to totally disable the use of the Enter key in my Word form, NOT try to use it as TAB. I have created a form in Word 2002, which will be a template that users can use to create a new form they can fill out. I am using EXACT row heights, and the form is ready to go. However, I don't want the user to be able to press the ENTER key in the form because it creates a new line, and I'm working with NOVICE users, so I don't want ANYTHING to be confusing at all (or the work won't get done!). So, I want to totally disable ENTER key use via a Word function or VBA, so that nothing happens when they press it, maybe just a Message-Box telling them that ENTER is disabled (they can navigate by TAB and MOUSE). Surely this is possible, especially in VBA code. Does Word have a Keypreview property that I can change? Set KeyValue=0, or something? When the doc opens, a Macro runs that disables the enter key by setting its value to 0? If you can help me with this, I'd appreciate it. A reading of many discussion threads got me close to the answer, but doesn't have my situational context. Tag: Creating XLST / Transform File Tag: 115136
  - 8
    - Character Limits and Macro Spell Check I have a document with forms in it, and there are a few sections where I have to limit the number of characters. So I inserted a Legacy Form Field text box and then limited the characters through properties. However, when I try to run a spell check macro, it is spell checking all of my other form fields (these are RichText content controls), except for this one. I tried inserting a RichText content control into the Legacy Form Field, but that wouldn't work either. I just need to limit the characters people are typing in this section and then spell check. To be honest, I don't even care if it's protected or not. I've tried this macro: Sub SCForm() ActiveDocument.Unprotect Selection.WholeStory Selection.LanguageID = wdEnglishUS ActiveDocument.CheckSpelling ActiveDocument.Protect Type:=wdAllowOnlyFormFields, NoReset:=True End Sub And this one: Sub FormsSpellCheck() ' If document is protected, Unprotect it. If ActiveDocument.ProtectionType <> wdNoProtection Then ActiveDocument.Unprotect Password:="not2day" End If ' Set the language for the document. Selection.WholeStory Selection.LanguageID = wdEnglishUS ' Perform Spelling/Grammar check. If Options.CheckGrammarWithSpelling = True Then ActiveDocument.CheckGrammar Else ActiveDocument.CheckSpelling End If ' ReProtect the document. If ActiveDocument.ProtectionType = wdNoProtection Then ActiveDocument.Protect Type:=wdAllowOnlyFormFields, NoReset:=True End If End Sub The same thing happens. It checks everything but the character limiting one. I also tried the one recommended on the MVP, and I couldn't get that one to work at all. I wasn't quite sure what to copy/paste and what to delete from that huge section. Thanks in advance. Tag: Creating XLST / Transform File Tag: 115133
  - 9
    - Mouse Wheel I have a user form with a multipage tab. Some of the tabs in the userform have vertical scroll bars with a hight up to 1500. The user can use the scroll control to move up and down. I have one user who wants to use the wheel on the mouse to move up or down. I cannot find any reference to the mouse wheel. Does anyone know if this is possible? I would appreciate any help you can offer. Thank you, SoCal Rick Tag: Creating XLST / Transform File Tag: 115132
  - 10
    - How do I calculate time in form fields? I have a user form that users enter the time they began a project and the time they end a project. I need it to calculate hours and minutes. I'll admit to being a "newbie" on fill forms, so I can use any help I can get! Thank you! Tag: Creating XLST / Transform File Tag: 115128
  - 11
    - save file wihout macros I have a template that generates a standard letter for a user based on inputs. The macros are used to generate the correct text given a users input. The template works well. However, sometimes we will need to access the document later on. I do not want the users to run the macros again. Is there a way to strip the macros out of it and just save the file? My code ends with: If Response = vbYes Then date2 = Format(Now, "MM-d-yyyy") filetypename1 = strfilename & " " & date2 ChangeFileOpenDirectory "J:\PIH\ENGINEER\CFP\" MsgBox filetypename1, vbOKOnly, "File name would be: " ActiveDocument.SaveAs FileName:=filetypename1, FileFormat:=wdFormatDocument, AddToRecentFiles:=True End If Any help would be appreciated! Tag: Creating XLST / Transform File Tag: 115123
  - 12
    - Set Focus and Incorrect Dates I'm having a problem with getting SetFocus to work and with 1/1/2008 being recognized as later then 12/31/2007. I have listed the code below. (Sorry this is so long). It originally had a Cancel = True on the Event but I was asked to remove it. The reason being if the txtBenefitPeriodEndDate is before the txt BenefitPeriodBeginDate but it's the begin date that was entered incorrectly then the user has to enter a date in the txtBenefitPeriodEndDate before it will allow them to get back to the txtBenefitPeriodBeginDate. The two sets of dates I have work together. They are: txtBenefitPeriodStartDate txtBenefitPeriodEndDate (must be later then txtBenefitPeriodStartDate) txtHRAStartDate (must be later or equal to txtBenefitPeriodStartDate) txtHRAEndDate (must be later then txtHRAStartDate and equal to the txtBenefitPeriodEndDate) Since they do work together I just want to remove the text from txtBenefitEndDate and keep the cursor there because if it moves to txtHRAStartDate then I get that message if I click into txtBenefitPeriodStartDate. Here is the code for txtBenefitPeriodEndDate and txtHRAStartDate: Private Sub txtBenefitPeriodEndDate_Exit(ByVal Cancel As MSForms.ReturnBoolean) ' 5.) Benefit Period End Date must be greater then 4.) 'Benefit Period Start Date. If txtBenefitPeriodEndDate.Value < txtBenefitPeriodStartDate.Value Then MsgBox "The Benefit Period End Date must be" _ & vbCrLf & "after the Benefit Period Start Date." txtBenefitPeriodEndDate = Null txtBenefitPeriodEndDate.SetFocus End If End Sub Private Sub txtHRAStartDate_Exit(ByVal Cancel As MSForms.ReturnBoolean) ' 6.) HRA Start Date must be later or equal to 4.) Benefit Period Start Date If txtHRAStartDate.Value < txtBenefitPeriodStartDate Then MsgBox "The HRA Start Date must be later or" _ & vbCrLf & "equal to the Benefit Period Start Date" txtHRAStartDate.Value = Null txtHRAStartDate.SetFocus End If End Sub I am just beginning to learn and am very confused why SetFocus doesn't seem to work. It seems to work fine if I want it to go in a forward motion but if I try to get it to stay where it is or go backwards it just doesn't work. Also, the dates. It works if 01/01/2008 (txtBenefitPeriodEndDate) is before 01/02/2008 (txtBenefitPeriodStartDate) but not if 12/31/2007 is prior to 01/01/2008. Any help I can get is greatly appreciated. Thanks. Tag: Creating XLST / Transform File Tag: 115118
  - 13
    - Word 2007 Color Scheme I can't find a way to switch color schemes using VBA in Word 2007. I know you can apply a theme but i only want the colour scheme. Tag: Creating XLST / Transform File Tag: 115115
  - 14
    - delete line containing a certain text string I receive files containing many lines starting with the word 'Table' and ending with the string '== =='. These are interspersed with a few lines also beginning with 'Table' but ending with various different strings. I want to delete the lines endiing '== ==', leaving only the others. Each line ends with a paragraph mark (after the strings mentioned above.) I've tried to do this with the Help available in Word and the advice given in this discussion group but so far failed. Can anybody help? -- Terry Sycamore Tag: Creating XLST / Transform File Tag: 115102
  - 15
    - Blind print out of pages I am to build a template for users to use and what it is to have is a button that prints our specific sections of text. Basically, a user locates a heading in the document and then clicks on the button and the code in the button has to figure out how many pages are under that heading and print them. How would I code something like that? Tag: Creating XLST / Transform File Tag: 115100
  - 16
    - HELP! Text Form Fields values disappear on print I have a word document with over 400 text form fields. The fields are filled in through a user control. When I print preview the document, it looks fine. When I print it, the first thing that happens is all of the values in the text form fields disappear. Any ideas would be greatly appreciated. Thank you, SoCal Rick Tag: Creating XLST / Transform File Tag: 115093
  - 17
    - Filtering Columns in Word? Hi, Iâ??m trying to implement something similar to AutoFilter in Excel. I have several tables in a document. Two of the columns in each table are called â??Service Descriptionâ?? and â??Type of inspectionâ?? respectively. Since there are only three Types of inspection, a simplified version of those two columns could look as follows: â??Service Descriptionâ?? â??Type of Inspectionâ?? Description1 C1 Description2 C1 Description3 HGP Description4 HGP Description5 MI Description6 MI Let's suppose that every table has something similar to what's shown above. What I would like to accomplish is that through the click of a button or a macrobutton field or whichever you consider is the most appropriate event handler, every table in the document gets filtered based on the Type of Inspection. I was thinking about having three macrobutton fields, called "CI", "HGP" and "MI", so that upon double-clicking "CI" for example, every table in the document hides/unhides the appropriate rows. (i.e it only shows the rows that correspond to a CI Inpection Type). Is there a way to accomplish this? How can I refer to each table in a document? and moreover, How can I select the appropriate range to hide it based on the clicked button? Thank you, Juan Tag: Creating XLST / Transform File Tag: 115087
  - 18
    - Word Macro for Printing Sections Hello, We have a form letter which is 2 pages. We do a mail merge from an Excel sheet. The mail merge creates a new word document with all of the form letters addressed to the different addressees. It appears that Word turns each set of pages into a section. This is fine. We then fax these to the addressees using our fax printer. I have created a macro that prints each section as an individual document which then gets faxed to the customer. The problem is the number of sections is a variable. One week it may be 90 the next it may be 100. The macro I created has 140 print sections in it. This works fine until the last section. Because the macro has 140 sections the last fax has not only the 2 pages it should have but then it back tracks and adds an additional 2 pages until it gets to 140. So the last fax may have 80 pages in it. I need the macro to understand how many sections there is and stop when it gets to the end. Any advise would be great! Thank you. Tag: Creating XLST / Transform File Tag: 115086
  - 19
    - Preventing macro from copying over from template to document I have made a template which just puts in a date range then autosaves the file to a particular name when you close it. This create a new document, but all the macro coding from the template file is copied into the document. How can you set it so that the coding from the template isn't copied into the document? I would also prefer if the file isn't saved on close, but if the name and location of the document is just set by the macro (so when you go file>save it still lets you change the name and location if you want). But i coulnd't get it to go to the right directory. This is the code i have: Private Function WeekStart() As Date Dim wday As Byte wday = Weekday(Date) Select Case wday Case 1 WeekStart = Date Case 2 WeekStart = Date - 1 Case 3 WeekStart = Date - 2 Case 4 WeekStart = Date - 3 Case 5 WeekStart = Date - 4 Case 6 WeekStart = Date - 5 Case 7 WeekStart = Date - 6 End Select End Function Private Sub Document_Close() Sunday = Format(WeekStart() + 7, "d") Saturday = Format(WeekStart() + 13, "d MMM yy") FileTitle = Sunday & " - " & Saturday & ".doc" ActiveDocument.SaveAs "J:\Editorial\Magellan\Sickness Absence\Afghan\" & FileTitle End Sub Private Sub Document_New() Selection.GoTo What:=wdGoToBookmark, Name:="DateRange" Selection.InsertBefore Format(WeekStart() + 7, "dddd, d MMMM") Selection.InsertAfter " to " Selection.InsertAfter Format(WeekStart() + 13, "dddd, d MMMM yyyy") End Sub Thats all in the ThisDocument module. Thanks Tag: Creating XLST / Transform File Tag: 115079
  - 20
    - How can I get the time of the last input event (key and mouse I have done a small program in VB.NET that uses the GetLastInputInfo function to retrieve the time of the last input event. It checks every second and it works well in Windows XP. However, when I install the program in VISTA it crashes. Does anyone know how I can get the time of the last input event (key and mouse activity) in VISTA? Any direction and help is most appreciated! Best regards, Tomas :) Tag: Creating XLST / Transform File Tag: 115076
  - 21
    - Selecting a paragraph I need to add '<B>' at the beginning and '</B>' at the end of the particular paragraph then move to the beginning of the next paragraph. The following works if the insertion point is at the beginning of the paragraph but falls down if not. I have tried various key combinations to try to get to the beginning of the paragraph but if the insertion point is already there they fall down too. Selection.HomeKey Unit:=wdLine, Extend:=wdExtend Selection.MoveLeft Unit:=wdCharacter, Count:=1 Selection.HomeKey Unit:=wdLine, Extend:=wdExtend Please help Francis Hookham Sub htmlBold() Selection.MoveDown Unit:=wdParagraph, Count:=1, Extend:=wdExtend Selection.Cut Selection.TypeText Text:="<B>" Selection.PasteAndFormat (wdPasteDefault) Selection.MoveLeft Unit:=wdCharacter, Count:=1 Selection.TypeText Text:="</B>" Selection.MoveRight Unit:=wdCharacter, Count:=1 End Sub Tag: Creating XLST / Transform File Tag: 115071
  - 22
    - Template with Conditional Formating I am looking to create a template or form in Word 2003 that will contain a variable number of items each with a drop down list. For example... Body Text Exhibit A: Drop Down List ... Exhibit N: Drop Down List Body Text The drop down list for each exhibit will be the same, but the drop down item selected for first exhibit would be different from the next. I want a way for the user to indicate what their last exhibit will be (any letter A-N), lets say 'D' and then only have Exhibits A through D be available. Also, when the template is printed then only the relevant exhibits and body text should print. Any help would be appreciated. Tag: Creating XLST / Transform File Tag: 115069
  - 23
    - Continuous Numbering of Pages Across Files I'm trying to consecutively number pages across a large number of files that are all in the same folder. I'm trying to use the IncludeText field tip that Cindy Meister mentions on her website but I'm running into all sorts of weird problems. I've had this working on a few files and then "magically" the fields no longer work and indicate there are syntax errors. I'm talking about in the files that were working. Does the IncludeText method actually work? Is there a better method? I'm using Word 2003 under Windows XP. Thanks in advance for any help/tips. Brian Tag: Creating XLST / Transform File Tag: 115066
  - 24
    - Word 2007 Global Building Blocks Hi, I have put my Word 2007 autotext entries into one file as a BB.dotx and saved it in the default startup directory as noted in file Locations. I also create a .dotm macros file that access any custom autotext from that BB.dotx file. There is another program that has a template in the same folder. For some reason when this other programs template is running I get an error that says my BB.dotx or Macros.dotm file says it is read-only. The .dotx and .dotm files get pushed out to the users C:/ drive and is not on a network. If I change my Macros.dotm file to be 2003 compatible then only the bb.dotx file gives an read-only warning. Now I noticed if I saved my BB.dotx file to the ...\Application Data \Microsoft\Building Blocks folder, then I don't get the error anymore. However the problem is I don't want the Building Blocks to be in the users directory. Is there a way to change the global location for Building Blocks or a better way of doing this? Thank you for your time and help. Kerri Tag: Creating XLST / Transform File Tag: 115060
  - 25
    - Macro to access Outlook 2007 Hello, Ok, so here's my issue. Do to the security settings in my office, Outlook 2007 is set up so you can not write any VBA code or create any macros. But I have this report that is made up every morning and I have began the processes of trying to automate this report in Word 2003, and in this doc I have calculated fields, linked excel charts/graphs, etc... . But a couple tables that are in this report are emailed to me every morning. The emails come as an attachment which opens up IE and displays a table. So what I'm trying to do(if possible), is to use VB in word to pullOut/extract or whatever the correct terminology is and place that table into word. Possible? Tag: Creating XLST / Transform File Tag: 115048
- Next
  - 1
    - change font color macro In Word 2003, I've written a macro to change specific parts of the text in a document to Dark Red (RGB 128,0,0) with a Find/Replace. I tested and created the Find/Replace first, then duplicated the actions to record the macro. When I do the F/R manually, it works just fine; it also works while I'm recording it. After I finish the recording and run the macro, however, it does everything EXCEPT change the color. What am I doing wrong and how can I fix it? Here's the text of my macro: ' FixResumeProjectName Macro ' Macro recorded 6/25/2008 by klsigel ' Selection.Find.ClearFormatting Selection.Find.Replacement.ClearFormatting With Selection.Find .Text = "---*---" .Replacement.Text = "^&" .Forward = True .Wrap = wdFindContinue .Format = True .MatchCase = False .MatchWholeWord = False .MatchAllWordForms = False .MatchSoundsLike = False .MatchWildcards = True End With Selection.Find.Execute Replace:=wdReplaceAll Selection.Find.ClearFormatting Selection.Find.Replacement.ClearFormatting With Selection.Find .Text = "---" .Replacement.Text = "" .Forward = True .Wrap = wdFindContinue .Format = False .MatchCase = False .MatchWholeWord = False .MatchAllWordForms = False .MatchSoundsLike = False .MatchWildcards = True End With Selection.Find.Execute Replace:=wdReplaceAll End Sub Thanks- Karen Tag: Creating XLST / Transform File Tag: 115046
  - 2
    - Block a document from email Hello all I would like to know how to block a document from being emailed, for example if it had a specific word in it - maybe in the properties. I don't really want to lock the document and I wondered if there was a way of coding a template to block it from email. Does anyone know if that is possible? Thank you. Aehan Tag: Creating XLST / Transform File Tag: 115045
  - 3
    - Defining a specific range Hi there, I'm trying to create a macro that opens Word documents in a folder and searches for the words "Changes due to". However, I want the search to take place in a range that starts at the "Overview" word (in a Heading 2 style) and ends when the next Heading 2 is met. I've done some searches on this forum, but I can't find this specific definition of my range. Thanks for any help. Carlos Tag: Creating XLST / Transform File Tag: 115041
  - 4
    - New Page Event Hi, I'm looking for a "new page" event, which insert a text box whenever user add a new page. Is that possible? Thanks, Faruk Tag: Creating XLST / Transform File Tag: 115033
  - 5
    - Where else can I go for word programming support? Can anyone recommend other venues for word programming support? I've been stuck on an issue for a couple of weeks, and for the first time have not found a resolution by posting here. Are there other forums or newsgroups where it'd be appropriate to post word programming questions? Tag: Creating XLST / Transform File Tag: 115019
  - 6
    - Can't enable the macros in Word - system says it is but it is NOT Went on line, followed instructions, but my system says macros are enabled, but I still get the most annoying message that they are disabled every time I open a WORD document Tag: Creating XLST / Transform File Tag: 115016
  - 7
    - cycle through embedded excel chart objects in code I have a doc with several excel object charts. Can I cycle through these in VBA and change the location of the source file (excel file)? I need this so the pair (word and excel file) will work even if I move them to a different location. Thansk. Jesper Tag: Creating XLST / Transform File Tag: 115014
  - 8
    - remove warning when updating linked excel chart-objects I have a word-document with several charts that are linked to an excel file. When I open the doc a warning appears asking whether I want to update the objects. Can I get rid of this? Thanks. Jesper Tag: Creating XLST / Transform File Tag: 115013
  - 9
    - Insert values from Excel at Bookmarks in Word Hi, I have a word document (Document1) with five bookmarks. I have an excel workbook (Workbook1) with three sheets. I want to insert values from different cells in the excel workbook into the five bookmarks. The values in the excel workbook are placed in different cells in the three worksheets. What would the be the code to accomplish this? I assume the mail-merge option is out because it requires a list. The data here is scattered across the different worksheets. Thanks in advance for the help. Regards, Raj Tag: Creating XLST / Transform File Tag: 115004
  - 10
    - inserting blank line I have a template which has a userform for the user to choose which type of letter. the form has a dropdown and formfield("text13") For 2 of the types I hide the dropdown and the formfield. For the other type when I display the dropdown and formfield, I need to insert a blank line before my next paragrapgh. In my macro I populate 1 text field and then need to insert the blank line: I've tried the insertafter as seen here but to no avail. Sub NoRefPPD() ActiveDocument.FormFields("Para2").Result = "Enclosed, please find a copy of the report stating that you have reached Maximum Medical Improvement from the " & _ "above-noted injury." ActiveDocument.Bookmarks("Text13").Range.InsertAfter (Chr(13)) End Sub How can I insert a blank line or additional carriage return after ("Text13") ? Thanks, Bryan Tag: Creating XLST / Transform File Tag: 115002
  - 11
    - Update Links I have about 5 links in my Word doc all lnked to 5 different excel files. They are set to update automattically when the document opens. But if some one changes the excel file it does not reflect it in the document until I update the links manually by either goin to edit/links then updating them, or by right-clicking on each and updating them seperatley, or by opening and closing the document. But what I want to have is a commandButton that when clicked it updates all the links in the document. Tag: Creating XLST / Transform File Tag: 114999
  - 12
    - Calling form fields by string-name? Dear All The name of my form is "form1". It contains two input fields: "field_1" and "field_2". For both files I'd like to have the same action, done in function "TextFieldName". Function SetTextField(TextFieldName As String) form1.<<Name_of_Field_n>>.Font = 0 End Function What is the syntax to pass a string as a form-name-object? Kind regards Oliver I've been trying with: - form1("TextFieldName").font = ... - form1.Item("TextFieldName").font = ... - form1.Index("TextFieldName").font = ... .. with no luck... Tag: Creating XLST / Transform File Tag: 114996
  - 13
    - How do you set files for multiple users at the same time? Tag: Creating XLST / Transform File Tag: 114993
  - 14
    - Inserting a Page Number in a Table in a Header I'm trying to insert a page number field inside a table inside a header. Basically, I want the text in Cell 1,1 to print, then Cell 1,2 should have "Page X" in it. Here's what I have so far: With ActiveDocument.Sections(1).Headers(wdHeaderFooterPrimary).Range 'Wipe out header .Select Selection.Delete 'Add table .Tables.Add Range:=ActiveDocument.Sections(1).Headers(wdHeaderFooterPrimary).Range, NumRows:=1, NumColumns:=2 .Tables(1).Cell(1, 1).Select Selection.TypeText Text:="Text goes here" .Tables(1).Cell(1, 2).Select 'Selection.TypeText Text:= Dim rng As Range Set rng = .Tables(1).Cell(1, 2).Range rng.ParagraphFormat.Alignment = wdAlignParagraphRight rng.Text = "Page " rng.Collapse wdCollapseEnd rng.Fields.Add rng, wdFieldPage Unfortunately, at that last line, I get Run-Time Error 4605: "This command is not available." I've narrowed it down to the fact that it's in a table. How can I fix this? I'm working on Word 2007 12.0.6311.5000. Thanks! Tag: Creating XLST / Transform File Tag: 114992
  - 15
    - Input on how to generate charts in word from Access data I need to automatically generate a word document that has a number charts (approx 17). If needed I can predefine the properties of each chart (type, axis, title etc). The data is in a Access database. Pulling data into a template would be fine if possible, or anything else that works. Could you give me some pointers as how to go about this? Should I export data to an Excel file with predefined charts and then automatically link these into the word document? Or should I export values directly into word and use the Graph-object to display the charts? I'm very good at Access VBA, moderately good at word-vba. Thanks for any input. Jesper Tag: Creating XLST / Transform File Tag: 114985
  - 16
    - how to pause running application hello, How to pause an application which is creating an word report? i want to pause these word report generation and want to resume it after i restarting the system. The data for word report generation is taking from MS Access and SQL server. Tag: Creating XLST / Transform File Tag: 114984
  - 17
    - Problem Inserting graph Hi, I use the code below which I got from here to insert a line graph, which works. But shows a bar chart before changing to a line graph which can take some time to change and seems to be messing things up. So I have place the following code after it to to pause things to see if it helps. Dim StartTime StartTime = Timer Do While Timer < StartTime + 60 DoEvents ' Yield to other processes. Loop While this does seem to help, sometimes, itâ??s a bit slow and takes a bit to long. Is there a way of refreshing things so that the change is immediate? Also do I have â??diag.ChartType = xlLineâ?? in the right place? I would like to point out I have changed it so it now takes the data from a file and not a table. Why does this change the num lock? Is there anything else I shold know? Sorry i may have to many questions in one message Sub Test() 'You need to set a reference to "Microsoft Graph 11.0 Object Library" in 'Tools > References (VBA Editor menu bar). 'Declare some variables: Dim o_OLE As Word.OLEFormat Dim diag As Graph.Chart Dim docCurrent As Document Dim rngInsertGraph As Range Dim docSourceData As Document Dim tblData As Table 'Then, set the variables, like: Set docCurrent = ActiveDocument Set docSourceData = Application.Documents.Open("C:\My Documents\test.doc") Set tblData = docSourceData.Tables(1) 'Inserting graph at beginning of paragraph 2 in document. _ You could use the current selection instead... Set rngInsertGraph = docCurrent.Content.Paragraphs(2).Range rngInsertGraph.Collapse wdCollapseStart rngInsertGraph.InlineShapes.AddOLEObject ClassType:="MSGraph.Chart.8", _ FileName:="", LinkToFile:=False, DisplayAsIcon:=False Set o_OLE = rngInsertGraph.Paragraphs(1).Range.InlineShapes(1).OLEFormat o_OLE.DoVerb wdOLEVerbShow Set diag = o_OLE.Object 'Manipulate the object like this: With diag diag.ChartType = xlLine With .Application.DataSheet 'Assuming row one and column one contain headers _ which means that .Cells(1,1) is empty 'Get header from docSourceData: .Cells(1, 2).Value = Left(tblData.Cell(1, 2).Range.Text, _ Len(tblData.Cell(1, 2).Range.Text) - 2) .Cells(1, 3).Value = Left(tblData.Cell(1, 3).Range.Text, _ Len(tblData.Cell(1, 3).Range.Text) - 2) .Cells(1, 4).Value = Left(tblData.Cell(1, 4).Range.Text, _ Len(tblData.Cell(1, 4).Range.Text) - 2) .Cells(2, 1).Value = Left(tblData.Cell(2, 1).Range.Text, _ Len(tblData.Cell(2, 1).Range.Text) - 2) ' If you have more than two rows... ' .Cells(3, 1).Value = Left(tblData.Cell(3, 1).Range.Text, _ ' Len(tblData.Cell(3, 1).Range.Text) - 2) ' .Cells(4, 1).Value = Left(tblData.Cell(4, 1).Range.Text, _ ' Len(tblData.Cell(4, 1).Range.Text) - 1) .Cells(2, 2).Value = Left(tblData.Cell(2, 2).Range.Text, _ Len(tblData.Cell(2, 2).Range.Text) - 2) .Cells(2, 3).Value = Left(tblData.Cell(2, 3).Range.Text, _ Len(tblData.Cell(2, 3).Range.Text) - 2) .Cells(2, 4).Value = Left(tblData.Cell(2, 4).Range.Text, _ Len(tblData.Cell(2, 4).Range.Text) - 2) ' If you have more than two rows... ' .Cells(3, 2).Value = Left(tblData.Cell(3, 2).Range.Text, _ ' Len(tblData.Cell(3, 2).Range.Text) - 2) ' .Cells(3, 3).Value = Left(tblData.Cell(3, 3).Range.Text, _ ' Len(tblData.Cell(3, 3).Range.Text) - 2) ' .Cells(3, 4).Value = Left(tblData.Cell(3, 4).Range.Text, _ ' Len(tblData.Cell(3, 4).Range.Text) - 1) 'Etc. 'By default, a newly inserted chart is 4x4. _ So, if you have 3 columns and only 2 rows, delete extra stuff .Columns(5).ClearContents .Rows(3).ClearContents .Rows(4).ClearContents End With 'Sample code to manipulate the chart istself .HasLegend = False ' .Application.PlotBy = xlColumns ' .Width = CentimetersToPoints(15) ' .PlotArea.Width = CentimetersToPoints(8) ' .Axes(xlCategory, xlPrimary).TickLabelSpacing = 10 ' .Axes(xlCategory, xlPrimary).TickLabels.Orientation = 90 End With 'And do not forget to destroy the objects: 'Deactivate the graph object diag.Application.Quit 'Clear objects Set diag = Nothing Set o_OLE = Nothing SendKeys "{ESC}" docSourceData.Close wdDoNotSaveChanges docCurrent.Range.InsertAfter "New text inserted after chart was created." End Sub -- Rich... http://www.jadwizracing.co.uk Tag: Creating XLST / Transform File Tag: 114983
  - 18
    - Word 2007 DocVariable losing vbCr on File Close/Open Hello all I am storing data from a UserForm in a Word 2007 document in DocVariable fields. Some docvariables are being loaded from multiline textboxes via code like: ActiveDocument.Variables.Add "v1", TextBox1.Text For test data, assume I type in "a" plus ENTER plus "b" into the text box (without the double quotes) - so my textbox contains an "a" plus a vbCrLf plus a "b". After running the above Variables.Add line in my OK_click routine and closing down the userform, I then run this macro to display the contents of the docvariable (all Dim statements etc removed to keep it short): Sub aaa() v = ActiveDocument.Variables("v1") For i = 1 To Len(v) s = s & Asc(Mid(v, i, 1)) & " " Next MsgBox s End Sub As expected, this displays "97 13 10 98". If I now save the document in native DOCX or DOCM format, close it, reopen it, and then rerun the same macro, it will now display "97 10 98". The action of closing and re-opening the document loses the vbCr (i.e. the ascii 13). This is NOT what happens in earlier versions of Word. Any ideas on how to stop this? All of the {docvariable v1} field codes in the document display correctly (i.e. show the paragraph mark) until you close and reopen the document. After reopening the document the "a" and the "b" will be on the same line - i.e the paragraph mark is now missing in the document. C'ya all Trevor Tag: Creating XLST / Transform File Tag: 114977
  - 19
    - How do I find speech recognition free, now that 2007 does not inc lude speech recognition Tag: Creating XLST / Transform File Tag: 114976
  - 20
    - ReProtect = Reset Forms Help, I'm using the following code to re-protect form fields in Odd Numbered Sections. It works great except it is also resetting the form fields. Here is the code that I am useing. Thanks for your help. Sub reprotect() Dim sPassword As String For Each oSection In ActiveDocument.Sections 'If the section's index / 2 <> 0 (odd) protection needed' If oSection.Index Mod 2 <> 0 Then oSection.ProtectedForForms = True Else 'no protection needed(even)' oSection.ProtectedForForms = False End If Next If lProtected <> wdNoProtection Then sPassword = "" ActiveDocument.Protect Type:=lProtected, NoReset:=True, Password:="" End If End Sub -- Eric the Rookie Tag: Creating XLST / Transform File Tag: 114971
  - 21
    - Editing template with Image to be changed. I have over 100 documents and I have to change a small image that needs to be changed. Is there a way to search a document for the first graphic Object it finds and replace them with another one? I have some scripting that replaces text, but I'm not 100% sure how the image part of it would work since I haven't been able to recover the actual object name. Thanks Tag: Creating XLST / Transform File Tag: 114968
  - 22
    - Way to print out more then first page I have a word document that has a Table of Contents that uses hyperlinks. The user selects the article they would like to view via the TOC and is taken to the document. from there they click on a button on the page that is to print out the document currently in view. However some of the documents have overflown into two or more pages. Is there a way to build a function that the document runs prior to the user clicking on the TOC so that the function knows the number of pages assigned to each link in the TOC. That function then passes the number of pages to the Application.PrintOut method to assure that all the pages are printed? The function would have to be smart enough to figure out the pages as this function would be embedded in a template file for further use by the users. Tag: Creating XLST / Transform File Tag: 114965
  - 23
    - Macro - Subtract one day from current date Hello, I have been reading past posts from people who want to auto put a date in their document that is not currentdate. I have read "WORD Date & Time Manipulation: Tips & Techniques" document and I tried doing exactly what it has and I am not getting any closer to my goal. So I think a macro could be the best bet. So what I want to do (and I am open to suggestions about how it should be done), I want to insert a date in a field, text box or whatever works best, and have the macro subtract one day from the current day(TODAY) so it will show yesterday's date, in this format "d-MMMM". HELPPP!!!! Tag: Creating XLST / Transform File Tag: 114964
  - 24
    - Creating a Macro that will only print the current page I am having difficulty with this task. I am unable to record a macro that will only print one page. I have created a faux macro and edited it to include the following: Public Sub PrintCurrentPage() With Dialogs(wdDialogFilePrint) .Range = wdPrintCurrentPage .PrintToFile = False .Execute End With End Sub but it prints the entire document and not just the current page. Can anyone help me with this. I am using Outlook 2003 on Windows XP. Thanks in advance Tag: Creating XLST / Transform File Tag: 114957
  - 25
    - Footer Macro in Word - Section Count I'm trying to create a macro that can copy the information in the Footer on the first page (section one) to the rest of the footers in the remainnig sections. The macro needs to know how to count the sections and use that number to 'repeat' the copy/paste function. Does that make sense? Can anyone help? Thanks! Tag: Creating XLST / Transform File Tag: 114954

I'm attempting to use MS Word 2007 to open an XML file - generated by
InfoPath 2007 - and then apply a transform to get the data in the format I
want it, and be able to modify it within MS Word 2007.

Can I actually create the "transform" (.xls) file within MS Word 2007? Can
someone recommend a guide to create the transform?

Thanks!

Top

Re: Creating XLST / Transform File by Cindy

Cindy
Thu Jul 10 07:55:13 PDT 2008

Hi =?Utf-8?B?Q2hhcmxpZSBCcm93bg==?=,

> I'm attempting to use MS Word 2007 to open an XML file - generated by
> InfoPath 2007 - and then apply a transform to get the data in the format I
> want it, and be able to modify it within MS Word 2007.
>
> Can I actually create the "transform" (.xls) file within MS Word 2007? Can
> someone recommend a guide to create the transform?
>
The better place to ask this would be the xml or xsl (not xls - that's an
Excel file) newsgroup.

Yes, you could write this in Word and save it as a "plain text" file. But Word
has no special tools that will help you to do so.

Cindy Meister
INTER-Solutions, Switzerland
http://homepage.swissonline.ch/cindymeister (last update Jun 17 2005)
http://www.word.mvps.org

This reply is posted in the Newsgroup; please post any follow question or
reply in the newsgroup and not by e-mail :-)

Top