How do access Office templates in Word2003?

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Embedded Calendar I'm creating an electronic form, with several date entries. I would like to have an embedded calendar to select and fill in the date entries. I would appreciate any help! -- Message posted via http://www.officekb.com Tag: How do access Office templates in Word2003? Tag: 73421
  - 2
    - Table of contents I have created a table of contents that loks very normal. like a heading tab, then page number like below. I know I can create a link from the text "Chapter One" to the place that chapter starts, but with editing and changes often the page number will change ie: I add some text and this pushes Chapter Two to page 27. Is there a way to automatically link the page number to the page that chapter starts on. Currently the only way I can think to do it is to go through the document and change the page numbers in the TOC manually. Since I make changes often, there must be a better way to change the page numbers. Table Of Contents Chapter One Page 14 Chapter Two Page 26 Tag: How do access Office templates in Word2003? Tag: 73415
  - 3
    - How do I type A over X without using the fraction bar? How do I type the variable A over X without typing it like a fraction or division (while using microsoft office)? Thanks Tag: How do access Office templates in Word2003? Tag: 73413
  - 4
    - How do I download Microsoft equation 3.0? Where do I go to download Equaton 3.0? It did not install when I installed Word 2003? Tag: How do access Office templates in Word2003? Tag: 73411
  - 5
    - Track changes question This might seem a petty problem for some of you out there and again, i am aware that there might be no solution. Anyway, i will ask the question and someone might reply. I was proof reading a document and I made some 80 changes to a single word/I suggested another synonym. However, now that I am almost finished I am not convinced I made the right decision so I would like the original word back. I know I could do it word by word (reject changes) but that would take me ages. Is there any way of doing it all at once and for the document not to look as if it was in a battlefield. Tag: How do access Office templates in Word2003? Tag: 73404
  - 6
    - complete header with all button and address bar is missing in wor. Somehow everything has been removed from word, unable to do anything like print or insert objects or change the font size. Tag: How do access Office templates in Word2003? Tag: 73401
  - 7
    - How do I stop text from writing over other text in word? I am typing my term paper. Everytime I go back to edit, or change a word, the new text I type writes over the old text I already had written. This is very bad, because I cannot change anything, without having to write the whol sentence, or paragraph, over. There must be a setting somewhere I can change. Can anyone help me? Thank you! Nicole Tag: How do access Office templates in Word2003? Tag: 73395
  - 8
    - mailing labels I want to print mailing labels merging from a data-base, but I don't want to send to each record, only selected records. How do I do that? Thanks. Janice Tag: How do access Office templates in Word2003? Tag: 73391
  - 9
    - Letter spacing problem I'm noticing the spacing between some letters in my documents is not really evenly balanced. I do not recall seeing this in Word 97. I'm now using 2000. Any suggestions much appreciated. thanks Tag: How do access Office templates in Word2003? Tag: 73389
  - 10
    - Keeping first row of multiplage table In Excel, I can say I want the first row (my column headins/titles) to print at the top of every page. I have a 20 page table in a Word doc and I want it to do the same thing. is that possible in Word? Tag: How do access Office templates in Word2003? Tag: 73386
  - 11
    - what is outlook what do i do on outlook give an example Tag: How do access Office templates in Word2003? Tag: 73385
  - 12
    - How do I center two columns of type along a middle line in Word? I want this result: President Jane Ellen Doe Vice President Joseph Roberto Roe Secretary Mary Schmo Communications Joyce Ann Low Please help. Tag: How do access Office templates in Word2003? Tag: 73383
  - 13
    - Font errors I have a problem with fonts in word 2003. In a 5 page document I will get font spacing errors like the one in the example below in 6 or 7 places. The E in THE is actually right after the H with no space in between, however it prints (Both on screen and printer) like it is shown in the example. There does not seem to be any rhyme or reason to this. I have uninstalled and reinstalled both word, then Office with no help. I tried detect and repair. This is only happening in word, and not any other Office applications. Any ideas greatly appreciated. Thanks EXAMPLE: TH EEND Tag: How do access Office templates in Word2003? Tag: 73380
  - 14
    - Points before and after How do I keep Word 2003 (no problems in previous versions) from randomly switching from "pts" to "line" when I change the increments for Before and After Paragraph Spacing? In my Options-General tab, I am using POINTS. The numbers I am entering are different everytime but they are labeled "pts" at the time I am changing them and then I change the number while "pts" still remains in the dialog box, and all of a sudden the measurement is much bigger by far than I chose. The "pts" has changed to "line". This doesn't happen all the time. I format desktop publishing type of documents at a fast pace and and use this command hundreds of times a day for exact page layout. Why has this changed in Word 2003? And how do I control it? Tag: How do access Office templates in Word2003? Tag: 73378
  - 15
    - Setting Even pages and odd pages different margins for book bindi. I need to set odd pages with a larger right margin, and even pages with large left margin for binding two page to single sheet. Do I have to set each odd and even page? Tag: How do access Office templates in Word2003? Tag: 73368
  - 16
    - how do i fix a compile error in hidden module : auto exec ? office in office small bussiness edition the message compile error in hidden module : auto exec always appears when I start word or excel how do I fix this? Tag: How do access Office templates in Word2003? Tag: 73367
  - 17
    - Word Conversion Feature I recently came across Word's conversion feature. (Templates, Other, Batch Conversion) Wow! ..never knew that existed. My question..does this produce direct formatting? Are the styles preserved? I would like to have it match the style in Word by looking at the text and saying "hey, you look like BodyText2 so I'll convert you and format the paragraph as BodyText2" or am I asking the impossible. I know there are third-party utilities that do this but was wondering if we can "customize" this feature. Thanks in advance! Tag: How do access Office templates in Word2003? Tag: 73361
  - 18
    - where can i get new fonts i am trying to get new fonts for my word program and i can't seem to figure it out i had my resume created in Atlanta font but my computer doesn't have it so it makes my resume look weird Tag: How do access Office templates in Word2003? Tag: 73359
  - 19
    - cursor size How do I change/adjust the blinking cursor? Tag: How do access Office templates in Word2003? Tag: 73350
  - 20
    - Table emergency I'm picking up on a document someone else started, which is a form in tables. There are times when I'd like for the cell margins to be 0 all around instead of the default 0.08 on the right and left. No matter how many times I go into the box and change it, it goes right back to the default. I'm sure there's a way to change this default, but I don't have time to pursue it now and hope someone has the answer at their fingertips. Thanks for this and all of your help. Tag: How do access Office templates in Word2003? Tag: 73343
  - 21
    - Word 2003 keeps forgetting my default address & envelope size I keep entering my address in both the envelope tool and the options page but unlike Word 97, 2003 seems to keep forgetting it. Is there another setting that I am missing? Tag: How do access Office templates in Word2003? Tag: 73336
  - 22
    - forms help - drop down boxes I've created a form and am having trouble getting the drop-down boxes to behave like I want them too. The user of the form should select an item from the drop down box, but I want the result to be a code for the item. So, for example, if the user chooses the item "black," once he/she tabs out of the field, the code "blk" should populate that field. This will be true of most of the drop down boxes in my form. I do not want to use the code itself in the drop down list, because in most cases, the correlation will not be this simple. I've tried a macro to accomplish this, and though the behavior is correct, once the user moves out of the field, the result code (i.e. "blk") is added to the list of available items in the drop down box. Any ideas? Tag: How do access Office templates in Word2003? Tag: 73317
  - 23
    - new, odd behaviour i'm sure i haven't changed any settings - but prior to today i could select a word and type and it would replace the selected word with what i'm typing - now it inserts it in front of the selected word - using Word 2003. Cheers JulieD Tag: How do access Office templates in Word2003? Tag: 73305
  - 24
    - Table of content & Section When i tried to insert table of content in a word document ( 80 pages ) the option of right align is disabled . also when i tried to insert section break in the same document (type new page ) a continuos section inserted instead. Please help Tag: How do access Office templates in Word2003? Tag: 73304
  - 25
    - i can't open any word documents in word-- why is that? can anyone help me? I try to open a word document but it tells that it is unavailable what does that mean? it opens just fine in word pad. Tag: How do access Office templates in Word2003? Tag: 73301
- Next
  - 1
    - Access word without 25 character CD Key? I purchased a used Gateway Notebook computer on Ebay. The software is registered in the name of "Jeffrey." to fill inthe rest of th blanks on the installation, the program calls for entering a "25 character CD Key. It says it can be found on the back of the CD jewel case. My Word CD's did not come in any Jewel CD case. How do I register this software or access the program? Tag: How do access Office templates in Word2003? Tag: 73292
  - 2
    - Moving Word normal.dot template Hi > I'm running Windows XP Home and Word 2000 > > Does anyone know if I can move my Word templates to My > Documents for ease of backing up and still have them available when I choose New Document in the application? > -- Many thanks JD Tag: How do access Office templates in Word2003? Tag: 73285
  - 3
    - Need a daily journal template to use as a business diary... The subject matter says it all. I am looking for a form to use for a day to day diary for my business. Hopefully it will include an imput for sales figures, problems to be addressed, weather information or othe conditions. Appreciate your help. Thank you. Tag: How do access Office templates in Word2003? Tag: 73281
  - 4
    - smart tags What are some of the benefits smart tags. Tag: How do access Office templates in Word2003? Tag: 73271
  - 5
    - I want to re arrange the order of my pages. I made a booklet to advertise our new business. When I was done I relized that I didn't like the order my pages were in. How do I re organize my pages. Tag: How do access Office templates in Word2003? Tag: 73268
  - 6
    - How do you insert a graphic in a single envelope? How do you insert a graphic in a single envelope? Tag: How do access Office templates in Word2003? Tag: 73264
  - 7
    - Can't indent twice! We are struggling with the changeover to Word 2000, made necessary because with our new network software WordPerfect kept crashing. In creating legal documents it is important to keep manual control of numbering and lettering. This is because we are often quoting from the middle of other documents, and we often have to start with (say) subparagraph "r", skip to "t", and go on to sub-subparagraph (iii), etc. I see that to indent after a number or letter, you type the number or letter, hit TAB, then CTRL+T (hanging indent), and type. The text wraps around and you get an evenly indented paragraph after the letter number. For example: 2. Blah blah blah blah blah blah blah blah blah blah blah blah blah blha blha blha alah alhaal bla ha lh. 3. Blah lahg lha a blh ablh a blh blah blah blh alh l alh lha lha lah . etc. But this doesn't work if you want to indent twice. What I want is: 3. a. Blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah b. blah blah blah blah blah blah blah blah blah blah blah blah blah blah After hitting the TAB after "a.", I hit CTRL+T -- but then the "a" gets indented too. Further, only the first line indents twice -- the text then wraps back to the first indent. Hitting CTRL+M is even worse because the "3" gets indented as well. Making a doubly indented paragraph is a routine, everday task, and I assume the solution must be simple too. How do I get it to indent twice without indenting the number and letter too? Tag: How do access Office templates in Word2003? Tag: 73257
  - 8
    - How to read table of contents Hi all, I have assignment in which I have to convert Doc to chm file. I am able to get Table Of Contents. But I am not able to get heirarchy (tree) of Table Of Contents. e.g Introduction and Scope 2 1 Database Tables 2 1.1 Requirements 2 1.1.1 Data 2 1.1.2 Links to Other Tables 2 2 Database User Profiles 5 2.1 Authors 5 2.1.1 Likely Tasks 6 Introduction and Scope The primary purpose of the database is to support traceability (requirements through design and verification). 1 Database Tables 1.1 Requirements Ideally, the Requirements table will contain all requirements across all projects. 1.1.1 Data The following types of data will be stored in the Requirements table. Each record will store an individual requirement, one or more sentences containing a single occurrence of the word ?shall.? (Actual field names and values are TBD.) Question : 1. How can I get Content of TOC And Reference Content like TOC = 1 Database Tables 2 Content = Introduction and Scope The primary purpose of the database is to support traceability (requirements through design and verification). Any kind of help from you appreciated for this project. From Jigar Shah -- Message posted via http://www.officekb.com Tag: How do access Office templates in Word2003? Tag: 73244
  - 9
    - How do I auto copy data from cell in a word table to another cell. I have a word table and in it i need to duplicate data into other cells - how do i format the other cells to automatically copy the original cells data - Please Tag: How do access Office templates in Word2003? Tag: 73243
  - 10
    - Importing multi page Tiff's Hi, Our photocopier can scan multiple page documents into a single MTIFF file. When I open this file in a graphics program i see the individual pages. When i use Insert - Picture from file in Word 2000 and select this picture, only the first page is inserted. Is there some way to import picture files without doing each one individually? Thanks, John Tag: How do access Office templates in Word2003? Tag: 73239
  - 11
    - Footnote problem I used to have Word 2000. In it, when I pointed mouse to a footnote insertion (a superscript number in a text), a small flag and then the footnote text would appear in a small window, which was quite a convenience. Recently, I have installed MS Word 2002 on my Windows XP Home SP2. Now, when I point mouse to a footnote, all I get is a flicker and no text or anything. Is this normal for Word 2002? Did Word 2002 abandoned this footnote option? Is there a way to get it back? Any assistance is appreciated. -- Ilya Zeldes Fort Myers, Florida Tag: How do access Office templates in Word2003? Tag: 73235
  - 12
    - Language bar problem I have MS Word 2002 installed on my Windows XP Home SP2. I use switch between English and Cyrillic keyboards, which worked fine for some time in all applications - Word, Outlook Express, etc.. However, recently, the switch (Left Alt+Shift) stopped to work in Word, although it continue to work in all other applications. In Word, I still can switch between keyboards manually, by clicking on a language icon and choosing language. How can I restore the switch in Word? -- Ilya Zeldes Fort Myers, Florida Tag: How do access Office templates in Word2003? Tag: 73234
  - 13
    - Convert Word file to wordperfect Is there software to convert a word file to WordPerfect so it can be viewed by a neighbor who has WordPerfect not word? Any help appreciated. Thanks. Phil Tag: How do access Office templates in Word2003? Tag: 73233
  - 14
    - how do i edit a downloaded wordview file how can i edit an word viewer that i downloaded as an e-mail???? and if so why in the hell doesnt the damn keyboard type if all the connections are in and all software is working????? someone please help??? Tag: How do access Office templates in Word2003? Tag: 73232
  - 15
    - How do I delete a pasted email which automatically shows in Word? I copied and pasted a hotmail email to a file but the same email always automatically appears when Word is opened. How do I stop this happening so that when Word is opened, a blank document appears? Tag: How do access Office templates in Word2003? Tag: 73231
  - 16
    - Delete a pasted email which now automatically shows when Word is o I recently copied and pasted a hotmail email to a file in Word. The same email now always appears automatically whenever Word is opened. How do I stop this from happening so that a blank document appears when Word is opened? Tag: How do access Office templates in Word2003? Tag: 73229
  - 17
    - How can I type on top of a document that has already been create.. Please help Tag: How do access Office templates in Word2003? Tag: 73227
  - 18
    - HOW DO I DOWNLOAD MICROSOFT WORD? IM PROGRAMMING A NEW COMPUTER I'm trying to down load microsoft word to my computer, but don't know where to go on the web to get it or where to begin. Do i have to buy the doftware mayself or can i get it from the internet? Im a brand new user to a computer. Your help is needed. Thanks Tag: How do access Office templates in Word2003? Tag: 73226
  - 19
    - Document Map In viewing the Document Map, the highlight is the same color as the heading, so I cannot tell what heading is being highlighted. I don't want to change the color of my text, how can I change the color of the highlighting in the Document Map. I have Word 2000, SR-1 Also, a lot of my headings do not show up in the map, sometimes I have to re-type the heading before it will appear, and sometimes no matter what I do it does not appear. What can I do to fix this? Tag: How do access Office templates in Word2003? Tag: 73225
  - 20
    - How do I activate the dictation toolbar in word perfect to train . for office 2000 small business Tag: How do access Office templates in Word2003? Tag: 73222
  - 21
    - Embedded Excel I made a word document into which i embedded an Excel sheet. When i select the excel sheet and 'right click' on it i got the option to "Worksheet Object" edit/open/convert... I made some changes to the excel sheet and need to get the "window" / portion of the sheet shown in the word doc larger - but how ? I tried the 'drag' tabs in combination with Shift, CRTL, AltGr etc........ Lars ;-) Tag: How do access Office templates in Word2003? Tag: 73217
  - 22
    - - can i type info o... i have a conidentiality agreement to fill out - how can i type info on this document then print with new info on document Tag: How do access Office templates in Word2003? Tag: 73211
  - 23
    - How do I set up Outlook as my default email program replacing Out. I recently installed Outlook replacing Outlook Express but I don't know how to gain access to my ISP using Outlook. How do I set this up? Tag: How do access Office templates in Word2003? Tag: 73208
  - 24
    - Windows 2000- No longer stands alone? Five years ago I bought Windows 2000 as a separate program and have used it with three versions of my OS, never installing Office. Now I'd like to know if I can update it. MS Support pages don't show a self-standing Word program that is even available as an upgrade. Windows 2003, it seems, comes bundled with Office. Does that mean I'll be obliged to buy Office if I want a later version of Word than my 2000? Tag: How do access Office templates in Word2003? Tag: 73207
  - 25
    - Microsoft "help" should not refer to other programs. I want help . How do I set up and use an address book with Microsoft Word? I do not use Outlook, but do use Outlook Express as my email program. When I try to access addresses, all I get is the email address from OE, not the full mailing address. Tag: How do access Office templates in Word2003? Tag: 73203

I cannot access MS Office templates when using Word 20003. Going to
tools/templates and add-ins there is nothing. Doing a search I can locate
them but how can I access from Word.
Many thanks
mpsmith@aapt.net.au

Top

Re: How do access Office templates in Word2003? by Doug

Doug
Tue Feb 08 05:24:34 CST 2005

Have you tried File>New?

--
Please respond to the Newsgroup for the benefit of others who may be
interested. Questions sent directly to me will only be answered on a paid
consulting basis.

Hope this helps,
Doug Robbins - Word MVP
"Kiwi" <Kiwi@discussions.microsoft.com> wrote in message
news:3848AAFD-C3AA-4933-B227-1E8C6431A670@microsoft.com...
>I cannot access MS Office templates when using Word 20003. Going to
> tools/templates and add-ins there is nothing. Doing a search I can locate
> them but how can I access from Word.
> Many thanks
> mpsmith@aapt.net.au

Top