Printing only to limited outline levels

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Word Text Borders Won't go Away I created text borders by pressing the shift+8 key continuously until a dotted line was created the entire width of the page. These lines were used to separate line items in text. I went to "Format"+ "Borders & Shading" and attempted to remove all borders from my document. All borders were then removeable except for a few. They seem to stick to the bottom of a page or the top. I have not entered any data into footnotes or headers. Any suggestions on how to rid my document of these stubborn borders? Thanks! -- tcdominic Tag: Printing only to limited outline levels Tag: 103842
  - 2
    - Sending documents from Word 2007 to friends with Word 2006 I'm not a computer person at all and just got a new laptop with Microsoft Office with Word 2007. I have tried to send two friends documents from my computer and they both have Word 2006 and said they weren't able to open it. One friend said 2006 and 2007 are not compatible. Help!! I'm really frusterated! Tag: Printing only to limited outline levels Tag: 103840
  - 3
    - Setting a style on a list item I can't seem to set a style on a list item without it taking it out of the list. If I have: 1) test1 2) test2 And I set something like "Heading 1" to set the style based on "list" or something else, it takes it out of the list and the list becomes: test1 1) test2 How do I set a style that doesn't affect the list and only does nothing to the text or list. I am just trying to set up a style that I can use in my TOC. Thanks, Tom Tag: Printing only to limited outline levels Tag: 103835
  - 4
    - Table of Contents multiple styles I am trying to create a table of contents which I can almost get to work. The problem is I need 2 styles for the same level. The way the document is set up, most of the lines I want on level 1 are Times New Romans and 12. The appendix happens to be in Times New Romans and 16. Level 2 happens to be Times New Romans and 12 also. So what I did was set up Headings 1 and Headings 2 as Times New Romans 12 and Headings 3 as Times New Romans and 16 (and applied Headings 3 to Appendix. But if I try to set the TOC levels of Headings 1 and Heading 3 to level 1 and Headings 2 to level 2, Headings 3 becomes unchecked and doesn't show up in the contents at all. Is there some way to set up the table of contents to use the multiple styles for the same level? Thanks, Tom Tag: Printing only to limited outline levels Tag: 103833
  - 5
    - File Folder Labels Hi All, I created a label (Avery 5366) and selected New Document so that I could see the gridlines of all the labels on the page. I saved this file as File Folder Label. When I open this file, the gridlines are gone and I can't tell what label I am on. Is there a way to show the lines again? Tag: Printing only to limited outline levels Tag: 103826
  - 6
    - How can I have a Math Type tool bar show all the time? Every time I need to add a math symbol it takes about 4 or 5 key strokes. With my old version of Word, I could have the Math Type tool bar visible all the time. Is that possible with this difficult to use new version? Tag: Printing only to limited outline levels Tag: 103825
  - 7
    - Office 2007 Speech Recognition - or lack thereof Does anyone have any resolution to the fact we've lost the ability to use XP's speech recognition engine if a clean install of office 2007 (had to uninstall office 2003 as the 2007 install failed 1st time around...) was performed ? MSKB states Office 2007 does not support this feature...I've attempted to re-install the 2003 on top of 2007 (by deselecting all programs except for speech...) with no luck - Thanks for your help ! Tag: Printing only to limited outline levels Tag: 103824
  - 8
    - MS Word 2007 Compatability Ok, am frustrated...after upgrading to Office 2007 from 2003, I cannot open any Word 2007 documents from this one PC. I've set the default save to Word 97-2003 to save as a .doc file, but when I send these to users of Office 2003 I'm told the error messages include words like, ...problem opening this file, ....corrupt, etc... I've attempted the diagnostics (no problems resulted) - haven't tried to re-install to see if it will do the old Microsoft "repair...." - Anyone got ideas ? I don't want to (unless I have to) roll back because it "kludges" things all up! Ugh. Thanks ! Tag: Printing only to limited outline levels Tag: 103823
  - 9
    - View word 2007 as 2003 I am a new user to Word 2007, and I need to change the view, so that the program looks like Word 2003. PLEASE HELP. My job is suffering, as I am a writer and this new version SUCKS! Tag: Printing only to limited outline levels Tag: 103820
  - 10
    - how do i make picture bigger from original size? is there anyone who can help me on how can i make the picture i inserted in a word document larger than its original size? i'll appreciate all answers! Tag: Printing only to limited outline levels Tag: 103810
  - 11
    - Cursor position? This question has been submitted in the past with no response. Does MS Word 2007 have a feature to show the horizontal position of the cursor in a line of text. Thanks for any help Jerry Tag: Printing only to limited outline levels Tag: 103804
  - 12
    - Upside down text Office 2002 A4 portrait folded to make cover of an A5 menu. The event (So-and-so's Dinner) in a text box in the bottom half of the A4 sheet. Historical information in another text box at the top of the A4 so, when folded, it will appear in the back of the cover. How can I rotate the back cover text box 180deg so the text is upside down? (I see text direction in a text box can be sideways up or sideways down so it would be possible to do the whole thing on an A4 landscape with one text box up and the other down, but I should prefer to do it with a180deg rotation.) Will there be any loss of print quality? Francis Hookham Tag: Printing only to limited outline levels Tag: 103797
  - 13
    - how to search delete more than one characters in a document I use search & replace to delete a charachter in a document and it works fine. I would like to delete several characters at the same time. How can I do that??? Please HELP!! Tag: Printing only to limited outline levels Tag: 103785
  - 14
    - Word 2007 Where is 'column break' located?? Tag: Printing only to limited outline levels Tag: 103771
  - 15
    - printing info not needed Recently when I print a Document I also print Data\Microsoft\Templates\Normal.dot with all the information about the document. It is an annoying complete waste of paper. How do I disable this feature? -- Sue Tag: Printing only to limited outline levels Tag: 103768
  - 16
    - Optional Next Style Styles can define the style for the next paragraph. Is there anyway to only use the next style if something is entered? I'd like to create a pair of styles for Q & A. The Q style would format the line for a question and would define the next style as an A style. The A style would format the line as an answer and define the next style as a question. If nothing is entered on the Q style line, then the next line should be Normal. John... Visio MVP Tag: Printing only to limited outline levels Tag: 103767
  - 17
    - Office Standard 2007 Military Appreciation edition This posting is directed to anyone using Office Standard 2007 MAE, or to anyone using Office Standard 2003 MAE. I recently learned that MS offers an Office Standard 2007 Military Appreciation Edition (MAE), at a substantial discount over OS 2007 (The suite was a recently advertised item at my local U.S. Navy Exchange.) As a vet, I qualify for MEA. The MEA suite is a complete OS 2007 suite, however, I am concerned about the EULA. It prohibits the use of the suite for commercial, government, or non-profit usages. Aside from the personal joy that I receive from having genuine MS installed on my home cpu, I also need to bring work home from the office, or I need to initiate work related documents (commercial proposals, etc.) from home. My questions are- If I install MAE, will I encounter compatability issues with a corporate licensed edition? Will a home created document become corrupted at the office, or vice-versa? Will the creation of a corporate document on my home PC, place my company into a potentially illegal positon? If this occurs, or if I open my company to litigation for violating the EULA then the suite is not a bargain. Any comments would be appreciated. -- Tom Conrad Tag: Printing only to limited outline levels Tag: 103765
  - 18
    - prevent font size change when pasting from word to hotmail How can I prevent the font size changing from 14 to 20 when I copy and paste from Microsoft Word to a new hotmail. Tag: Printing only to limited outline levels Tag: 103757
  - 19
    - How do I add a sentence to a document I have a list of books I have in Word and I want to edit or add to the list. How do I do this? Tag: Printing only to limited outline levels Tag: 103737
  - 20
    - How do I insert the filepath name at the bottom of my docs How do I insert the filepath name at the bottom of my docs so that others may find where I have stored my docs from a printed copy. Tag: Printing only to limited outline levels Tag: 103728
  - 21
    - Creating a shortcut I am doing something wrong. I am a newbie. I am using XP pro with 1 gb of ram. I have Word 2003 installed and it is registered. I want to create a icon on the desktop so when I want to use Word 2003, I can just double click on the icon. I clicked on start/programs/microsoft office/right clicked on word 2003/create shortcut. The word 2003 icon doesn't appear on the desktop. Now, if I click on the start button, I see Word 2003(2) right above the start button. How do I get the Word 2003 icon to appear on the desktop? Thanks Tag: Printing only to limited outline levels Tag: 103720
  - 22
    - Office upgrade I thought I would ask you folks for your opinions on something I am thinking of just now: I have Office 2003 Professional installed on my PC (running Windows XP). I bought the Professional version as, at the time, I did quite a bit of stuff on Access. I have recently downloaded a Trial Office 2007 which I quite like. When the Trial version runs out in November, I need to decide on the options, i.e. Purchase a full version of Office 2007 Purchase an upgrade to Office 2007 (this is less expensive but are there disadvantages?) Which version? Now that I no longer use Access very often, would it be OK just to buy the Standard version and continue to (occasionally) use Access 2003 which I have already. I mainly use Word, Outlook and Excel. Your thoughts would be much appreciated. TIA Tag: Printing only to limited outline levels Tag: 103717
  - 23
    - how to go back the previous position when I move the document back and forth, how can I go back the previous position like back button in the IE? Tag: Printing only to limited outline levels Tag: 103715
  - 24
    - table style question, space before and after I want space both before and after a table, but not between rows of a table. Can someone please point me in the right direction? Thanks, Brian Murphy Tag: Printing only to limited outline levels Tag: 103713
  - 25
    - CHECK BOX IN MS WORK Please some one tell me how to insert Check Box in MS. WORD. -- Message posted via OfficeKB.com http://www.officekb.com/Uwe/Forums.aspx/ms-word-general/200709/1 Tag: Printing only to limited outline levels Tag: 103711
- Next
  - 1
    - Horizontal guide Does word have any guide to show exactly where the cursor is in a line horizontally across the page? WP had this feature to show the exact position where the cursor was placed in the line. Thanks for any help Jerry Tag: Printing only to limited outline levels Tag: 103709
  - 2
    - new end notes; old document I have a couple hundred end notes that I manually link to superscripted numbers in the text of an old document. Needless to say, it's tedious to change them manually when I add new end notes. At least I have the end notes renumbering automatically. But how do I convert them so that the superscript number in the text automatically changes when the end note number changes as I add new end notes randomly? Note that there are end notes that are NOT linked to any of the text as well. I'm using Word 2003 and apologize if this is an obvious question, or, more properly, if the answer is obvious. Tag: Printing only to limited outline levels Tag: 103708
  - 3
    - In Office 2007 where did the "Save As" go??? Help!!! I can't find the Save As command in Home Office 2007. Has anyone found it? Please tell me where it is. thx K Tag: Printing only to limited outline levels Tag: 103705
  - 4
    - Blinking Cursor Hi, I just upgraded from Word 2003 to 2007. The cursor blinks and makes typing awkward. I have a 3 gig machine from Dell with 2 gigs of memory. It didn't do this with Word 2003. Any ideas? Thanks, Jim PS Any other information needed? Tag: Printing only to limited outline levels Tag: 103702
  - 5
    - Working spreadsheet within Word The reports I write usually contain 20 pages of written material (word) and another 10-15 pages of spreadsheets (excel). Currently, I make PDFs and put all the excel pages at the end of the document as an appendix. What I'd really like to do is embed the Excel spreadsheet throughout the Word document so that I'm not always saying "see spreadsheet in appendix for details". I know I can paste tables, but I really would like to manipulate the spreadsheet calculations of necessary without having to continually repaste tables, so that's why I'm thinking "embedded" spreadsheet. Additionally, I'd like to "grab" some of the resultant calculations from the spreadsheet and feed it into a line of text within the Word document. I've heard that GoBe Productive can do this, but I really would not like to switch over all of our users...training nightmare... Can I do the above Word/Excel combo? If not, is MS working on it? Tag: Printing only to limited outline levels Tag: 103699
  - 6
    - set default printer for envelopes and labels The default printer for printing labels is set to Manual but I want it to go to auto select or tray 1 but I can't see a way of doing that. How do I set the label printing option in my Word 2003 to default to tray1? Tag: Printing only to limited outline levels Tag: 103698
  - 7
    - Word 2007 Anyone got any idea on how I can total the numbers in a column in a Word Table? I know there is way, as I have done it before, and now forgotten, and I am having no luck in finding and clues in Word Help. Any help gratefully received. Regards Tag: Printing only to limited outline levels Tag: 103688
  - 8
    - QUICK PARTS OR TABLES ARE NOT SAVED TO GALLERY I am facing a problem related to the Task -insert function. The problem is as follows- Whenever I try to save any quick parts or tables to a gallery , it is saved temporarily. Majority times ,when I start the computer's next session ;the saved data is gone. May I request you all to help me about this problem? Regards Tag: Printing only to limited outline levels Tag: 103675
  - 9
    - Can you get back your old file from replacing with another file? Tag: Printing only to limited outline levels Tag: 103665
  - 10
    - Printing Documents I just got a new computer with Vista and Windows Professional. I am working in Word and every time I want to print I get an error that says The Active Directory Domain is Currently Unavailable. My printer is connected to my computer, how come I can't print in any of the Microsoft software programs? I need to resolve this so that I can print my documents. Please help. Thanks Tag: Printing only to limited outline levels Tag: 103664
  - 11
    - Duel Language Documents Is there a way to set word to always accept a document when the first word can be either English or Spanish, then subsequent parts of the document can alternate between the two languages. My normal template is set to English, claro. -- Yours, Dan S. Notably: not a sock Tag: Printing only to limited outline levels Tag: 103661
  - 12
    - Reappearing document I am working with MS office 2007. A small document keeps surfacing when ever I press the office-button/new/create. I don't know what I did, but without even being aware of it, it keeps coming up instead of a blank screen. I can save it by any name, close and delete it, but whenever I call for a blank document again it comes up on the screen. Did I somehow save the document as some sort of template? I close MS office and even reboot. However when I open office and try the sequence, office-button/new/create, the same document or material comes up on the screen instead of a new blank screen or document. Any help would be appreciated. Jerry Tag: Printing only to limited outline levels Tag: 103658
  - 13
    - Spell check not woking in Vista My spell check is not working in vista. I was advised to got to Tools, Options, and change language to English. I tried but under Tools, I have no option tab. Please advise how to get my spell check working. It now says Lanuage is not available in English. Please help! Tag: Printing only to limited outline levels Tag: 103656
  - 14
    - missing dictionary file hello, i'm using word on a mac and it wont spell check because i'm missing the dictionary file. i can't find the original file for download anywhere on the net. can someone please email it to me or suggest a dictionary file i could download from somewhere or, perhaps theres another file alreay on the mac that i could direct word to use... thanks a lot for your help, maxslomoff@gmail.com Tag: Printing only to limited outline levels Tag: 103654
  - 15
    - office 2003 and 2007 is it possible to have BOTH office 2003 and 2007 on the same computer? if so, how do I do this? -- Message posted via http://www.officekb.com Tag: Printing only to limited outline levels Tag: 103650
  - 16
    - Size of WORD file Hello, I got a WORD document from a friend, 677 kb size. I opened and re-saved it (under a different name) without making any modification and the size went down to 72 kb. Both documents appear identical when opened. My friend runs on MS-XP-SP2. His WORD is XP-2002-SP3. I run on MS-W2000-SP4 ; my WORD is same as his : XP-2002-SP3. The settings might of course be different. What can be the cause of having such a big 677 kb file, containing apparently no more information than the small 72 kb file ? How can one avoid create such a big file ? Thank you in advance for your help and explanations. Jean-Pierre BELGIUM Tag: Printing only to limited outline levels Tag: 103647
  - 17
    - recent documentss unable to clear documents from recent document list Tag: Printing only to limited outline levels Tag: 103632
  - 18
    - Word 07 closes when I send a document by email I have had difficulty emailing a document in Office (word) 07. I changed the settings on the options as suggested and word just failed. What am I doing wrong? Tag: Printing only to limited outline levels Tag: 103630
  - 19
    - need field to remove the first word in a cross reference I have a cross-reference field in my document to a bookmark that contains several words. Is there any way to remove the first word and display the rest? Thanks Brian Murphy Tag: Printing only to limited outline levels Tag: 103629
  - 20
    - Word not saving a default option. Why not? Hey guys, I was having a problem with Word 2007 earlier today. It was creating spaces between lines of text where I didn't want it to. For example: It would do this instead of do this. I figured out how to correct the problem by going to Paragraph and checking the "don't add space between paragraphs of the same style" option. Then I clicked on the "default" button, and clicked on YES to change the template. However, I opened up a new document and it went back to adding spaces again. I tried reselecting the option, clicking on default twice--once before I checked the option, once after, all sorts of things, but Word simply won't save it as default. Anything I can try? Thanks! Tag: Printing only to limited outline levels Tag: 103628
  - 21
    - weird paragraph marks Using Word 2k. I've been given a Word file with what looks like simple slabs of text, just one paragraph after another. I'm processing the file for DTP, and my layout app was choking on what it saw as huge paragraphs. In Word I have tabs and pars visible, and I see the backwards P at the end of each paragraph (not the bent arrow for a manual linebreak). But there is something odd about many of these paragraphs. If I save to RTF and open the file resulting in Wordpad, many of these marks have disappeared and the paragraphs run together. If I do a triple-click in Word, to select a para, several of these "paragraphs" are highlighted, over a page. If I do search and replace for ^p, only a few paragraph marks are found. Ultimately I found that by saving as HTML, then opening that in Word again, then saving back, I converted these things to "normal" paragraph marks. Any idea what's going on, and a simpler way to convert them to normal paragraph markers? -- Posted via a free Usenet account from http://www.teranews.com Tag: Printing only to limited outline levels Tag: 103624
  - 22
    - OFFICE 2007 first line in aragraph indent How does one shut off the feature where the first line in a paragraph is indented? Thank you very much for any help here. Jerry Tag: Printing only to limited outline levels Tag: 103623
  - 23
    - How do I get ..... without using the . key and can write over it? II'm very sorry I can't be more accurate in my describing but Iâ??m trying to figure out how to get dotty underling - without underlining the word as well. I want the space between the words e.g.: Chapter 2 ...............pg74 - but without hitting full stop 20 times. With this you can also write over it. It Automatically adjusts to the test on the line. I really hope someone understands what Iâ??m meaning and can help me! Thank you - Tag: Printing only to limited outline levels Tag: 103620
  - 24
    - Gray background problem I have obviously unintentionally changed a setting somewhere. I don't know which one. Problem: I suddenly have a gray background on all my Word doc page numbers as well as all the other small graphics. There appears to be a gray outline/background around the smaller graphics. I tried the <Format/Borders and Shading/Shading/none> option and that doesn't help. Any help would be appreciated. Tag: Printing only to limited outline levels Tag: 103617
  - 25
    - tables I want to draw in landscape format 2 separate grids adjacaant to each other Tag: Printing only to limited outline levels Tag: 103615

HI,

Is it posible to print a document in its outline view, with only a certain
levels printed? say only upto level 2.

To explain further, I have a document with multiples .. i need one hard copy
with the contents of all levels and another hard copy with only the heading
and subheadings. Can i do this from the same document or do i create
another document?

Thanks for any inputs.
Ramesh

Top

Re: Printing only to limited outline levels by Stefan

Stefan
Wed Sep 19 06:11:58 CDT 2007

In Outline view, show only the levels you want and then print (not via Print
Preview).

--
Stefan Blom
Microsoft Word MVP

"Ramesh" wrote in message news:%23XjKzzq%23HHA.5360@TK2MSFTNGP03.phx.gbl...
> HI,
>
> Is it posible to print a document in its outline view, with only a certain
> levels printed? say only upto level 2.
>
> To explain further, I have a document with multiples .. i need one hard
> copy with the contents of all levels and another hard copy with only the
> heading and subheadings. Can i do this from the same document or do i
> create another document?
>
> Thanks for any inputs.
> Ramesh
>

Top