Accessing to Show Desktop

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Suggestion on how to make newsgroup messages easier to read Newsgroup messages would be easier and quicker to read if the text of each message appeared at the TOP of each message, instead of BELOW the text of the previous message(s), which makes it necessary to scroll down past the previous message(s) before you can read the new message. Larry Tag: Accessing to Show Desktop Tag: 55365
  - 2
    - Unwanted changes in font and size When I copy/paste or cut/paste a block of text from one place in a document to another, the copied text is in a new font and a new size. Sometimes the unmoved text just above the moved text changes in font and size. Then I have to edit to return all text to the original font and size. I suspect this might be a wordperfect feature that I somehow activated. How do I turn that feature off? (Word 2000, Windows 98) McGyver Tag: Accessing to Show Desktop Tag: 55362
  - 3
    - Indenting I'm using Word 2000. When I indent a single line and then hit return, the second line is automatically indented. I'd like the cursor to go to the margin instead. How can I set this up? Thanks. Bob Stringer -- To reply by e-mail please replace "NotHere" with "spamcop" in my address Tag: Accessing to Show Desktop Tag: 55358
  - 4
    - show text found before replacing I'm replacing text using wildcards in Word 2002(win98se). I don't want = to use "Replace All". The problem is, when I select "Find Next" Word = finds the text(around 5-6 lines long) but I can't see the entire text I = can see only the last line of the selection(at the top of the document = window). I have to then use the scrollbar to see what's been found which = is a real trouble for large files which I'm working with. I need to see the entire text selection so I can decide to keep/replace = the text selection. How can this be done? Thanks for any clues. I'll check back after a while. Vivek Tag: Accessing to Show Desktop Tag: 55352
  - 5
    - Vertical writing While editing my text, suddenly some 100-150 lines (from the middle of my text) went to vertical, like: m y c o m p u t e r so that some 70 new pages were created (each of them with 1 vertical line only). When I try to remove "indents" (new line symbol) then the above lying letter disappears. Can I restore original version of my text? Thanks Jan Kowalski Tag: Accessing to Show Desktop Tag: 55349
  - 6
    - Problem with viewing A4 Print Layout Hi, I just got a copy of Microsoft Word 2003. The problem I am having i that when I start a new document the page layout on screen look strange. I have selected A4 size and print layout view but can't see to solve the problem. You will see what I mean if you click on th screenshot below: 'Screenshot' (http://homepage.ntlworld.com/element110/Image1.jpg) As you can see the page layout looks out of proportion. When I compil a document and print it there are no problems it's just the look of i puts me off. When I open older documents, they display as they should, in A format. Has anyone any idea why this is happening and what I can do to fix it? Many thanks, Neil ----------------------------------------------- ~~ Message posted from http://www.ExcelTip.com ~~View and post usenet messages directly from http://www.ExcelForum.com Tag: Accessing to Show Desktop Tag: 55338
  - 7
    - How can I show certain size area and write in it. Back again, I'm having problems getting this done.How can I outline an area with dotted lines and then write in it. What I like to do is write in that area and then cut it out along the dotted line. I like the area to be 3x5" Your help is much appreciated........Peter Tag: Accessing to Show Desktop Tag: 55337
  - 8
    - Cdrw Missing registry Keys? I have just followed procedure to correct the problem of not having a recording tab in the properties box. When I have reached the end of the registerykey to change the value there is no driver volume(guid). Q1 how do I replace that ke Q2 do i have to reinstall the driver from a cd as it is an old cdrw drive but is compatible with xp. Tag: Accessing to Show Desktop Tag: 55336
  - 9
    - Word acting strange My Word program has become very slow to open, and when it opens, if I click on "file", it shifts to a total white screen for a few seconds, before finally opening and presenting the file menu. If no one knows what this is, it would help to learn how to reinstall on XP. I have the Ofice CD--I tried to "X" word and then reinstall, but it didn't change anything despite appearing to uninstall/install. Is there a way to uninstall JUST Word, and then reinstall? Tag: Accessing to Show Desktop Tag: 55332
  - 10
    - Word 2003 "Getting Started" Pane is Pain I know I'm going to feel like an idot when someone points-out the obvious, but... After (hapilly, for the most part) using Office 2003 for several weeks, I've turned-off the "getting started" task pane in the applications. By unchecking "Startup task pane" from Tools|Options|View in Excel, for example, it no longer appears when I start the program. But it doesn't work in Word 2003!?!? It doesn't matter if "Startup task pane" is checked or unchecked in Word, it always appears on startup!?!? What am I missing? Tag: Accessing to Show Desktop Tag: 55331
  - 11
    - lines appearing on page I have one computer that puts lines up and down and across on all documents I open. Thise documents open fine on all other computers without lines apearing on the screen. Must be a local computer setting. Not tables on any of the documents. Eliminate gridlines does not stop this problem. Thanks for your help in advance. Will Fleenor Tag: Accessing to Show Desktop Tag: 55309
  - 12
    - Pushing new styles to our users We are using Word 2002 SP2 on Windows 2000 SP4 PC's. We are migrating from WordPerfect 9 and are doing fairly well so far. We have created an add-in, library.dot on a network drive, which we copy down to users' PC's upon login in order to give them access to macros which should work across templates. That way, we can make changes to the network copy which gets pushed to the users at their next login. I now want to give them access to new styles we've created which need to work across templates, but I read in the newsgroups, that although toolbars and macros work from add-ins, styles don't. How can I push the new styles to our users that they can use across different template types? Just in case there is a better way to do it, the styles are for the purpose of double-indenting a block quote. Although, Word has a block quote style, we need ones with varying amounts of indention, so I created new styles with the correct indention. TIA, Allison Orange Systems Project Administrator Florida Public Service Commission aorange@psc.state.fl.us Tag: Accessing to Show Desktop Tag: 55308
  - 13
    - Defining Forms in Word 2002 First, apolgies for posting to three groups ... wasn't sure which was the best place to ask about this. I've come across some paper stock that consists of basically 3 IBM "punch cards" mounted via perforations on an 8.5"W x 10.5"L carrier. I would like to define this physical form to Word 2002 so that I can "call it up" when necessary. The 3 punch cards are each 7.3"W x 3.25"H. (In other words, they're in what I guess would be landscape mode). The first of the 3 punch cards begins at the top of the 8.5 x 10.5 carrier. At the bottom of this card, after the perforations that allow it to be separated from the carrier, there is a strip of .25"carrier before the perforations that designate the top of the 2nd card. This repeats after the 2nd card leading to the 3rd; there there's another .25" strip before the end of the physical carrier. I hope that the description above makes sense; I'm sure my terminology isn't the most accurate in terms of Word. The question(s) is(are) 1) What's the proper terminology ... form / template / paper / ??? 2) How do I define this "thing" to Word? Ideally, I would like for Word to recognize that at the end of the "logical" page (IOW, the 1st, or 2nd, or 3rd card), the next logical page begins on the next punch card on either the same, or next "carrier". Again, does that make sense? Thanks very much in advance ... I love these punch cards for notetaking or especially for sending people directions when they need them ... they're so convenient when you're driving. If I could just print them out from Word, it'd be even that much more so. I'm VERY much a Word novice. Phil Z Tag: Accessing to Show Desktop Tag: 55307
  - 14
    - missing server service Wehn I connect to the Internet (broadband connection) I get a message the server has not started. Whne I go to MMC the server service is no longer there to restart. How does one go about restoreing this service Thanks Tag: Accessing to Show Desktop Tag: 55306
  - 15
    - Defining forms in Word 2002 First, apolgies for crossposting to the three groups ... wasn't sure which was the best place to ask about this. I've come across some paper stock that consists of basically 3 IBM "punch cards" mounted via perforations on an 8.5"W x 10.5"L carrier. I would like to define this physical form to Word 2002 so that I can "call it up" when necessary. The 3 punch cards are each 7.3"W x 3.25"H. (In other words, they're in what I guess would be landscape mode). The first of the 3 punch cards begins at the top of the 8.5 x 10.5 carrier. At the bottom of this card, after the perforations that allow it to be separated from the carrier, there is a strip of .25"carrier before the perforations that designate the top of the 2nd card. This repeats after the 2nd card leading to the 3rd; there there's another .25" strip before the end of the physical carrier. I hope that the description above makes sense; I'm sure my terminology isn't the most accurate in terms of Word. The question(s) is(are) 1) What's the proper terminology ... form / template / paper / ??? 2) How do I define this "thing" to Word? Ideally, I would like for Word to recognize that at the end of the "logical" page (IOW, the 1st, or 2nd, or 3rd card), the next logical page begins on the next punch card on either the same, or next "carrier". Again, does that make sense? Thanks very much in advance ... I love these punch cards for notetaking or especially for sending people directions when they need them ... they're so convenient when you're driving. If I could just print them out from Word, it'd be even that much more so. I'm VERY much a Word novice. Phil Z Tag: Accessing to Show Desktop Tag: 55305
  - 16
    - Trying to use forms in word 2000 I am trying to create a form for our INTRANET page. I am using Word 2000 to do this. I believe I have the form created correctly. The problem is when I submit the form the data does NOT go into the .txt file that I want it to. The best that I can tell it does not go anywhere. If anyone has any suggestions on this I would greatly appreciate it. Thanks TED Tag: Accessing to Show Desktop Tag: 55303
  - 17
    - 22k file expands to 515k by printer I have a one-page doc with a simple 25 row x 4 column table. Only half of the cells have two words in each (Arial 9 pt font), and the other cells are blank. There is nothing else on the page. The file size reads 22kb, but when the HP 6mp printer begins to print it reads it as a 515kb file. Does anyone know why, and is this normal? Thank you. Tag: Accessing to Show Desktop Tag: 55299
  - 18
    - Need some help with automating Here is my situation, I print lables from word which I put on employee time tickets. Each lable has the employees name,ID number, and th work week. I was wondering if there is a way to only type the wor week in once and have it fill out all lables. Any help with this woul be greatly appeciated!!! Thanks in advance, Darrel ----------------------------------------------- ~~ Message posted from http://www.ExcelTip.com ~~View and post usenet messages directly from http://www.ExcelForum.com Tag: Accessing to Show Desktop Tag: 55291
  - 19
    - Screen shot file size I am making a word document for work which requires a good number of screen shots. I noticed that the file size for the document has grown to 6 MB. Is there a way for me to convert the screen shots pictures in the document to a format to create a smaller file size? Thank you! ------------------------------------------------ ~~ Message posted from http://www.ExcelTip.com/ ~~View and post usenet messages directly from http://www.ExcelForum.com/ Tag: Accessing to Show Desktop Tag: 55289
  - 20
    - Transfer Files Winword 6 to Works 7 I am using Windows 98 SE and WinWord 6.0. Going to switch to Windows XP and Microsoft Works 7.0. Can I use 'Backup' to save files on a floppy and 'Restore' them to the new Works 7.0? Is there another way of saving the data files from WinWord and transferring them to Works 7.0. ------------------------------------------------ ~~ Message posted from http://www.ExcelTip.com/ ~~View and post usenet messages directly from http://www.ExcelForum.com/ Tag: Accessing to Show Desktop Tag: 55288
  - 21
    - Print Selection (including headers) I want to be able to select some text, which goes onto the next page, and then print it (by Print Selection) including the header that occurs between the selected text? TIA Tag: Accessing to Show Desktop Tag: 55276
  - 22
    - making stacked fractions How would I get Word to make stacked fractions regardless of the fraction. I figured out how to get it to do it with 1/2 and 3/4 and it won't do it for any other values, like 7/9, for example. Also, the stacking only works with certain fonts. -- Richard Chalmers Design Engineer, Weatherend Estate Furniture rchalmers@weatherend.com Tag: Accessing to Show Desktop Tag: 55264
  - 23
    - Indentation and tab markers on horizontal ruler don't snap I am using MS Word 2000 on a computer with Windows XP Professional operating system. My preferred measurment unit for the horizontal rules is inches. In the past, whenever I openned a new word document, I was able to get the Indentation and tab markers on the horizontal rulers to snap to the 1/8" tick marks. On this computer though, whenever I open a new word document, these markers on the horizontal ruler don't snap to any of the tick marks. If I open a document sent to me by somebody else where the markers snap, then it will always snap, but I can't turn on the snapping feature on a new document. I would appreciate any help from anyone on this issue. Tag: Accessing to Show Desktop Tag: 55262
  - 24
    - Word XP footnotes won't renumber I have Office Xp and I have created 30 foonotes in a document. I want to delete footnotes 7-14. Normally, when I want to delete a footnote from the body of the text and also delete it from the footnote area of the page I just go to the footnote in the body and delete it and it automatically deletes it from the footnote area as well. I deleted the footnotes this way and they were deleted from the body and the footnote area but for some strange reason (no virus found) the renumbering of the footnotes did not work. So what you see in the footnote area is footnote 6 and then it goes straight to footnote 15. Why is it not renumbering all of a sudden??? I tried to copy and paste the text into a new document with no luck. I also tried the document on a machine running MS Word 2000. What is even stranger in Word 2000 is that all of the footnotes 7-14 show up in the footnote area and all of the footnotes except for number 7 show up in the body of the file. Isn't that weird that the same file would have 2 sets of issues on 2 different versions of MS Word. Basically what I need to happen is for THe Xp version of the file to renumber footnotes automatically after I remove any footnotes. Help Please. Tag: Accessing to Show Desktop Tag: 55261
  - 25
    - Template change This has gotta be simple. . . but, I can't figure it out. I want my new documents to open with a "normal" template, i.e. certain margins, Times NR font, and size 14 font. How do I change the "normal template" to these specs, so when I click "new document" these specs will be in place? Thanks in advance. Kakadu Tag: Accessing to Show Desktop Tag: 55259
- Next
  - 1
    - select less than a paragraph One of my coworkers has some feature enabled in Word 2000 that causes entire paragraphs to be selected any time a paragraph boundary is crossed in selection. (FWIW, the selection gets extended on mouse-up, not while he's dragging.) Does anyone know how to turn this off? It's driving him nuts. It doesn't happen for me, and we can't see what the difference in settings is between us. Both of us have "Use smart cut and paste" and "When selecting, automatically select entire word" turned OFF. Tag: Accessing to Show Desktop Tag: 55258
  - 2
    - Creating a table of labels... How do I go about creating a table of addresses to print out on labels without doing a mailmerge? Tag: Accessing to Show Desktop Tag: 55254
  - 3
    - XP -Word I have installed word into my computer but it keeps asking me for a product key to register it. I have entered the Yellow Lable Product key code in but it will not accept it. I purchased this through my college. What should I do??? Tag: Accessing to Show Desktop Tag: 55251
  - 4
    - Footer Problems I have a two line footer on my resume. On the screen in print view all is great. When it printsonly the top half of the first line prints. Any ideas what the problem is? I changed the margins from 1 to .5? still have the problem. Thanks. Tag: Accessing to Show Desktop Tag: 55244
  - 5
    - Why do I have to hit Enter twice? Hi there, I've noticed with a document I'm working on that when I hit enter a the end of a paragraph the cursor only moves on one space. When continue typing, however, a new paragraph does start. Anyone know wh this happens and how to correct it? Thanks, Graha ----------------------------------------------- ~~ Message posted from http://www.ExcelTip.com ~~View and post usenet messages directly from http://www.ExcelForum.com Tag: Accessing to Show Desktop Tag: 55241
  - 6
    - Poor appearance of font on screen Following a crash, I have had to re-install Windows XP Home and all my software, including Office XP Pro with SP1. Since then, the on-screen fonts in Word appear poorly-spaced and "blocky". The appearance sometimes improves, or changes, after the text has been highlighted. Can anyone help? Thanks Peter ------------------------------------------------ ~~ Message posted from http://www.ExcelTip.com/ ~~View and post usenet messages directly from http://www.ExcelForum.com/ Tag: Accessing to Show Desktop Tag: 55240
  - 7
    - Search & Replace Pattern Matching I would like to search and replace a single quote (') that occurs on every line of my document. How do I pattern match that? I tried "^'" (without the double quotes) in the Search field...but, it finds nothing!?!?! Thanks in advance!!! Tag: Accessing to Show Desktop Tag: 55237
  - 8
    - Equation 3.0 Why wont equation editor allow me to change an equation style from math to text in a document? 2 previous equations in the same document were converted today, however yesterday, the same equations in the same document on the same computer would not allow any styles to be changed. Any help here would be appreciated. Thank you Tenille Brimson Tag: Accessing to Show Desktop Tag: 55235
  - 9
    - Clip Art When I try to insert clip art in my Microsoft Word document I can't find it. Is it possible I delaeted the folder with this information in it? I am running Microsoft Word 2002 on XP. Is there a place I can retreive this Clip Art? Al Tag: Accessing to Show Desktop Tag: 55230
  - 10
    - standard toolbar messed up Dear all, The standard toolbar on my pc has disappeared, even when the toolbar is ticked under View-toolbars it is not there. The toolbar is not on the same line as any other toolbar. Resetting the toolbar has no effect. Even the little box that appears when one makes a customised toolbar has gone. Has anyone met this before? Thanks, Danny Tag: Accessing to Show Desktop Tag: 55229
  - 11
    - "little tricks" I have received answers to these questions several times and have resolved to save them to my hard drive several times. Nonethless, I can't find the answers to here goes Isn't there a way to start a new session of word (xp) with the documemnt that the last session was closed with, preferably at the point of last edit? Isn't there a windows / word way of editing a small part of a file, sending it to the desk top and opening a new word session that way... Hmmm I like to think I am articulate but I obviously am not Tag: Accessing to Show Desktop Tag: 55224
  - 12
    - Microsoft word 2000 I was wandering are there any microsoft word 2000 software availible for download on the net. If so were, because when I go to microsoft download center all I see are downloads for updates. I dont have product number or anything the computer was a hand me down. So I am trying to download a free version of microsoft word 2000 (original one, I have window 2000 professional) if all possible and microsoft excel also. Thank you in advance Tag: Accessing to Show Desktop Tag: 55221
  - 13
    - Envelope size I am trying to print addresses on common, rectangular envelopes for X-mas card using MS word. Please tell me what size of envelope I should select. Satoshi Tag: Accessing to Show Desktop Tag: 55218
  - 14
    - Tables -- one row to a page I have a customer for whom I do a report that contains a large table--three columns, but sometimes 5 rows, sometimes 100. And the third column has to be totaled. No problem there. But sometimes she requires that each row of the table be on its own page. This came up for the first time since I've been using Word, and I accomplished it by putting my cursor in each row and hitting Control-Shift to insert a hard page break. But my formula result at the bottom right cell of the table turned into an error message: "Table Index Cannot Be Zero." I entered the formula and tried again, with the same results. I also notice that there is some sort of spacer at the top of each page before the table row. So obviously the way I chose to put one row on each page doesn't work very well, and Word is treating each page as its own table. Can you tell me the best way to put each row on a page of its own? Should I tell Word I want each box to be at least X inches long, so only one row can fit on each page? Tag: Accessing to Show Desktop Tag: 55215
  - 15
    - word processing in Word I'm converting from WP to Word. In WP there is an icon on the toolbar which adds the path file to the document so that when you have the hard copy you can easily determine where it is located. I presume Word has something similar but I can't seem to locate it. Can you help me? Tag: Accessing to Show Desktop Tag: 55209
  - 16
    - Space between words inconsistent Hello, Using Word X on a powerbook, OSX.3 (Panther). I cannot seem to get the text to display without very odd spacing between words. I've tried kern/no kern, and worked with many different fonts. Is there a way to get the inter-word spacing to be equivalent throughout a document or line? Thanks very much. Mike ------------------------------------------------ ~~ Message posted from http://www.ExcelTip.com/ ~~View and post usenet messages directly from http://www.ExcelForum.com/ Tag: Accessing to Show Desktop Tag: 55204
  - 17
    - How to select a portion of a table ? Hi, I want to select, with VBA code in a macro, all the cells from cell(5,3) to cell(12,7) How can I do this ? thanks in advance ------------------------------------------------ ~~ Message posted from http://www.ExcelTip.com/ ~~View and post usenet messages directly from http://www.ExcelForum.com/ Tag: Accessing to Show Desktop Tag: 55203
  - 18
    - Cannot read text with .wps extension Created some text documents in a PC running Windows XP Home. It has Microsoft Works 6.0 installed. All the text documents created in this PC have a .wps extension. Trying to copy info (using a floppy disk) to another PC running Windows 95C. It has Microsoft Works 4.5 as well as Microsoft Word 2000. Every time an attempt is made to use either Microsoft Word or Microsoft Works to read any of the documents, all that comes up is a group of small squares and symbols. Absolutely nothing legible. Any ideas as to how to get the text to read? Thanks in advance. ------------------------------------------------ ~~ Message posted from http://www.ExcelTip.com/ ~~View and post usenet messages directly from http://www.ExcelForum.com/ Tag: Accessing to Show Desktop Tag: 55202
  - 19
    - Word won't open! Would appreciate if anyone can advise me: I am using a winXP machine with Office2000 installed. One day, every time I opened Word a 'This program has to close...' window came up and Word would shut down. Having researched the problem on the web I am aware of the 'renaming normal.dot' tactic, but running a search does not find any instances of normal.dot. I then tried running the command 'winword /a' which successfully opened Word, but as soon as I try to access any of the menus I get the same problem. I have deleted the 'data' key from the registry that is advised on some sites but no improvement. If I try to repair Word the machine tries to open windows installer but then fails. I have also uninstalled and reinstalled Office, but still no good. Does anyone know what I can do to fix the problem without resorting to formatting the drive and starting again. Many thanks ------------------------------------------------ ~~ Message posted from http://www.ExcelTip.com/ ~~View and post usenet messages directly from http://www.ExcelForum.com/ Tag: Accessing to Show Desktop Tag: 55201
  - 20
    - Word Index to PDF Hello, I'm using Word 2000, Windows 2000 Pro, and Acrobat 5.0. I'm converting a 300+ page Word .doc (2058 kb) to PDF using the "Acrobat|Convert to Adobe PDF" menu selection. Question 1: What is the direct way to create a PDF with linked index entries form a Word .doc? Question 2: In case the answer to question 1 is "No way exists, as everybody knows," then I ask, is it not remarkable that Word index entries are not automatically linked?! Question 3: Can I at least streamline the conversion process so the Word index tags don't fill the PDF with empty calories? (Elaboration follows.) When converting a Word .doc full of index tags to PDF, how do I streamline the process to minimize the PDF filesize? It seems to me that the Word index tags are hard for Acrobat to digest. After I add the index tags, the conversion takes much longer and produces a much bigger file. Currently, I've indexed about 1/4th of the .doc and the PDF is 5101 kb. So the Word .doc with index tags results in a PDF twice the size of one without index tags, yet the fatter PDF doesn't offer anything more except a few-page index...correct? I also converted the doc via printing to the acrobat printer driver and the distiller. These methods produce a PDF of about 1500 kb, almost instantly, and have everything (I think) the 5101 kb PDF has except TOC links. Correct? Thanks for entertaining my questions. ------------------------------------------------ ~~ Message posted from http://www.ExcelTip.com/ ~~View and post usenet messages directly from http://www.ExcelForum.com/ Tag: Accessing to Show Desktop Tag: 55200
  - 21
    - Word menu bar hide I recieved a word document with a macro, I suppose, that has deactivated or hide Word menu bar. How can I manage to activate it again? is there any way for it? Thank you very much. ------------------------------------------------ ~~ Message posted from http://www.ExcelTip.com/ ~~View and post usenet messages directly from http://www.ExcelForum.com/ Tag: Accessing to Show Desktop Tag: 55199
  - 22
    - Task Pane remain open pls I wish for the Task Pane to remain open at all times after each document is loaded or until i choose to close it within a document (not all documents). Currently the Task Pane loads at startup but after i open a documents, it disappears - annoying. How can i do this please? Running Word 2002 on XP. Tag: Accessing to Show Desktop Tag: 55193
  - 23
    - Fractions I am composing a handout for Turkey cooking times and '31/2 hours' doesnt look right. How do I make 1/2 look more like a proper fraction? Tag: Accessing to Show Desktop Tag: 55183
  - 24
    - Custom Labels Hi everyone Does anyone know where the specifications are stored when you create a custom label? Any help would be wonderful! Thanks in advance. Tag: Accessing to Show Desktop Tag: 55182
  - 25
    - question about documment recovery hello everybody/ u have been working on a document' and suddenly i had to leave my home. i left the computer running and the WORD working. when i came back home i accidently closed the WORD window and told him NOT to save changes made. is there anyway to recover the document??? its important. i checked the AutoRecovery optiong and it is turned on, and the Autosave interval is 10 minutes. thanks alot to whoever will try to help me!!! yarden@nunex.co.il Tag: Accessing to Show Desktop Tag: 55174

During installation of software, the installation screen occupies the whole
desktop. There is no way to click "Show Desktop". I need Show Desktop to
retrieve software code which was stored in one of my txt files. Clicking
Tab did not minimize the installation screen. Help would be appreciated.
Satoshi

Top

Re: Accessing to Show Desktop by Satoshi

Satoshi
Sat Dec 20 19:55:19 CST 2003

I made a mistake by posting to a wrong NG. Satoshi

"Satoshi" <satoshi@thuntek.net> wrote in message
news:bs2uem$93pgb$1@ID-115609.news.uni-berlin.de...
> During installation of software, the installation screen occupies the
whole
> desktop. There is no way to click "Show Desktop". I need Show Desktop
to
> retrieve software code which was stored in one of my txt files. Clicking
> Tab did not minimize the installation screen. Help would be appreciated.
> Satoshi
>
>

Top