word problem with paste

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - MSWord locks up when I paste in from web I often receive e-mails and like to save them to Word. Sometimes Word locks up when I attempt to paste. Tag: word problem with paste Tag: 109402
  - 2
    - Conversion from HTML to RTF does not work properly. When I converted a 5.5 MB dictionary (all in Latin charecters, using Times and Symbol fonts) to RFT for publishing, the following happened: (1) all the end-of entry markers CHR(183) (Greek full stop) disappeared. (2) combinations of accented letters (é, è etc.) with the following (or preceding) letter were changed into Chinese characters. Please, how can I prevent these changes to happen? TIA, kind regards, Rob van Albada, Amsterdam. Tag: word problem with paste Tag: 109397
  - 3
    - Word & Excel opening problem I resently re-installed Microsoft Office on my XP. When I open Word and Excel it opens a window which says "Preparing to Install". This happens everytime! It won't go directly into the program if I select a particular document and indicates that a window is open and can't open the document until the window closes. I am presuming that it is the "Preparing to Install" window is the one delaying it. It really slows the process down. This doesn't happen with Power Point or other programs; just Word and Excel. Is one of my settings wrong? And how do I correct this issue? -- Rick Wolfe Malaspina Coach Lines Tag: word problem with paste Tag: 109393
  - 4
    - Track Changes is off, but a formatting change is highighted... Hi All, I am editing a document in Word 2002 (10.5522.4219) SP-2. in preparation for delivering some Word formatting training. It had track changes enabled when I received it. I have turned off Track Changes and Accepted All Comments. However, when I then apply a Heading style, a change is tracked. I cannot work out why, or how to turn it off. Grrrrr!! Any help most appreciated. Alastair Tag: word problem with paste Tag: 109389
  - 5
    - Word settings won't hold I recently upgraded to Microsoft Office 2003 (student-teacher edition), hoping in part to get rid of a persistent problem in which my preference settings are constantly replaced by a consistent set of settings that I never chose. I carefully uninstalled the old version before installing the new one, but the problem persists. Nothing seems to prevent this, not even going through the register (at great peril, I know) and deleting all the references to Microsoft Office I could find. Creating a new normal.dot template didn't help, either. I can't figure what triggers this reversion to the unwanted settings. It doesn't happen immediately, or upon any event I can identify, but it never takes long. It either happens in the same computer session or the next time I turn on the computer and open Word. Other Office programs, Excel at least, don't seem to have this problem. Any suggestions? Thanks. John Craig NOSPAMjcraig007@highstream.net__________________________ Remove NOSPAM from address to reply. Tag: word problem with paste Tag: 109382
  - 6
    - file open very slow With frequency (but not 100% of the time) when I do a File>Open, it takes more than a minute for the dialog box to come up. Windows Explorer and other programs show a list of all the files in this directory quickly (although there are a lot of files: 2.2 GB in the folder and its subfolders. the subfolders maybe have half this). Is this a known problem with Word? Is there something I've got wrong? Can I fix this? Thanks for any help, Huck Tag: word problem with paste Tag: 109374
  - 7
    - Cannot print to a network printer Hi all. I have a network printer that work fine whith programs as notepad or works or the printer test page. But when I try to print from Ms Word 2003 I receive an error: winword.exe... application hang..... Someone can help me? I have Xp sp2 and office 2003 sp2. Tag: word problem with paste Tag: 109365
  - 8
    - file open menu very slow to open With frequency (but not 100% of the time) when I do a File>Open, it takes more than a minute for the dialog box to come up. Windows Explorer and other programs show a list of all the files in this directory quickly (although there are a lot of files: 2.2 GB in the folder and its subfolders. the subfolders maybe have half this). Is this a known problem with Word? Is there something I've got wrong? Can I fix this? Thanks for any help, Huck Tag: word problem with paste Tag: 109360
  - 9
    - macro runs but does not work as expected Hi, I created a macro by recording search and replace actions (replacing text as well as styles). The actions worked fine when recording the macro. The macro runs without error - but also without any effect. Thanks in advance for your support and best regards! Ulrike == Here is one of the actions of the macro: -- Selection.Find.ClearFormatting Selection.Find.Style = ActiveDocument.Styles("Heading 1") Selection.Find.ParagraphFormat.Borders.Shadow = False Selection.Find.Replacement.ClearFormatting Selection.Find.Replacement.Style = ActiveDocument.Styles("Ã?berschrift 1") Selection.Find.Replacement.ParagraphFormat.Borders.Shadow = False With Selection.Find .Text = "(" .Replacement.Text = "(" .Forward = True .Wrap = wdFindContinue .Format = True .MatchCase = False .MatchWholeWord = False .MatchWildcards = False .MatchSoundsLike = False .MatchAllWordForms = False End With Selection.Find.Execute Replace:=wdReplaceAll -- And here is the whole macro (but as far as I can see, in principle the find-replace action is just repeated with other parameters): Sub Signum_Manuskript_Formatvorlagen() ' ' Signum_Manuskript_Formatvorlagen Makro ' Makro aufgezeichnet am 10.12.2006 von Ulrike SchÃ¤fer ' Selection.Find.ClearFormatting Selection.Find.Style = ActiveDocument.Styles("Heading 1") Selection.Find.ParagraphFormat.Borders.Shadow = False Selection.Find.Replacement.ClearFormatting Selection.Find.Replacement.Style = ActiveDocument.Styles("Ã?berschrift 1") Selection.Find.Replacement.ParagraphFormat.Borders.Shadow = False With Selection.Find .Text = "(" .Replacement.Text = "(" .Forward = True .Wrap = wdFindContinue .Format = True .MatchCase = False .MatchWholeWord = False .MatchWildcards = False .MatchSoundsLike = False .MatchAllWordForms = False End With Selection.Find.Execute Replace:=wdReplaceAll Selection.Find.ClearFormatting Selection.Find.Style = ActiveDocument.Styles("Heading 1") Selection.Find.ParagraphFormat.Borders.Shadow = False Selection.Find.Replacement.ClearFormatting Selection.Find.Replacement.Style = ActiveDocument.Styles("Ã?berschrift 1") Selection.Find.Replacement.ParagraphFormat.Borders.Shadow = False With Selection.Find .Text = "[" .Replacement.Text = "[" .Forward = True .Wrap = wdFindContinue .Format = True .MatchCase = False .MatchWholeWord = False .MatchWildcards = False .MatchSoundsLike = False .MatchAllWordForms = False End With Selection.Find.Execute Replace:=wdReplaceAll Selection.Find.ClearFormatting Selection.Find.Style = ActiveDocument.Styles("Heading 1") Selection.Find.ParagraphFormat.Borders.Shadow = False Selection.Find.Replacement.ClearFormatting With Selection.Find .Text = "^p" .Replacement.Text = "" .Forward = True .Wrap = wdFindContinue .Format = True .MatchCase = False .MatchWholeWord = False .MatchWildcards = False .MatchSoundsLike = False .MatchAllWordForms = False End With Selection.Find.Execute Replace:=wdReplaceAll Selection.Find.ClearFormatting Selection.Find.Style = ActiveDocument.Styles("Heading 2") Selection.Find.ParagraphFormat.Borders.Shadow = False Selection.Find.Replacement.ClearFormatting Selection.Find.Replacement.Style = ActiveDocument.Styles("Ã?berschrift 2") Selection.Find.Replacement.ParagraphFormat.Borders.Shadow = False With Selection.Find .Text = "[" .Replacement.Text = "[" .Forward = True .Wrap = wdFindContinue .Format = True .MatchCase = False .MatchWholeWord = False .MatchWildcards = False .MatchSoundsLike = False .MatchAllWordForms = False End With Selection.Find.Execute Replace:=wdReplaceAll Selection.Find.ClearFormatting Selection.Find.Style = ActiveDocument.Styles("Heading 2") Selection.Find.ParagraphFormat.Borders.Shadow = False Selection.Find.Replacement.ClearFormatting With Selection.Find .Text = "^p" .Replacement.Text = "" .Forward = True .Wrap = wdFindContinue .Format = True .MatchCase = False .MatchWholeWord = False .MatchWildcards = False .MatchSoundsLike = False .MatchAllWordForms = False End With End Sub Tag: word problem with paste Tag: 109340
  - 10
    - Word Processor will not open up in works 8 If this is not the place to post this question please forgive and tell me where i can post it. I have Works 8 on my computer and all of a sudden i can not open the word processor program even though the other programs open up with no problem. It acts as if the program is "hung-up" i get no error messages it just does not open. I have been trying to fix this all day and i give up. anyone know how to fix this problem???? Tag: word problem with paste Tag: 109335
  - 11
    - Word Spellcheck finds old footer I just ran a spell/grammar check on a document in Word 2003 and it found an error in a footer--but that footer has been replaced. I can't find it in the document in Print view or when I print it out. Why is this happening, and can I make it go away? Tag: word problem with paste Tag: 109325
  - 12
    - Security warning when MS Word is opened When I open Word, a security warning pops up saying that the doc I'm opening contains macros that may contain viruses, etc. Since I'm only trying to open a new doc, or any of dozens that don't contain macros, why is this happening, and how do I get rid of this? Tag: word problem with paste Tag: 109321
  - 13
    - File permission error and Windows Live OneCare I keep getting "word is unable to complete save due to file permission error" since installing Live OneCare. Disable the Firewall and the problem goes away. (Saving to my hard drive, btw)Obviously, I don't want to adhere to this workaround. Also, if I launch Word 2003 in Safe mode via the Ctrl-key, the problem seems to disappear as well. What's the likely problem? The solution? Thanks. WindowsXP|SP2 Tag: word problem with paste Tag: 109318
  - 14
    - Word 2007 / Displayed Math Text Direction Printing Bug I'm not sure if this is the right forum for this sort of questions, but..= =2E I noticed this simple issue, which appears to be a bug to me, as I=20 reproduced it on several computers =E2=80=8Eand installations of Word 200= 7=E2=80=8E. I=20 wonder if anybody else experiences that too? Is it a known bug? Or=20 else, any idea what's going wrong to me? Attached is a short Word 2007 document (.docx) demonstrating the=20 following problem: When entering displayed equations (using Word 2007=E2=80=99s built in mat= h=20 entry, I.E. Alt+=3D) alone in a line =E2=80=8E=E2=80=8E(not surrounded by= any text),=20 equations in paragraphs with right-to-left directionality (switched=20 using =E2=80=8ECtrl+Shift) simply do not appear in the printed or PDF/XPS= =20 exported output. Inline equations =E2=80=8E=E2=80=8E(surrounded by text) = do not produce=20 that problem.=E2=80=8E The simple workaround is to change the directionality of all display=20 equation paragraphs to left-to-=E2=80=8Eright. Since there is no text aro= und=20 display equations, that will only have any other side effects in =E2=80=8E= terms=20 of paragraph spacing.=E2=80=8E Any ideas? -- Tom --=20 Tom Alsberg - certified insane, complete illiterate. Homepage: http://www.cs.huji.ac.il/~alsbergt/ * An idea is not responsible for the people who believe in it. Tag: word problem with paste Tag: 109316
  - 15
    - MS Word crashes when typing "Quando me l'hanno" in italian Hi I have discovered that Word crashes when: - the language is Italian - I type the sentence "Quando me l'hanno" I use MS Office XP in italian with the last updates, this happens both on Win 2000 and Win XP (both updated). Is there anybody that could explain why this happens? Perhaps the spelling/grammar checker fails? The sentence is a correct italian sentence, though incomplete. If I change the language to english the error does not happen. If I apply the Italian language the error appears again. Ciao A Tag: word problem with paste Tag: 109313
  - 16
    - Beta 2007 user When I try to open documents in word 2007 I get the following error message. "This document is unavailable" Wheter it is 2003 format or new document using word 2007. What is up? Tag: word problem with paste Tag: 109310
  - 17
    - You do not have a World Wide Web start page registered on your computer. Using Word 2002, I get the above message when I click Start Page on the Web toolbar. Searching for the message, I find an Excel list of error messages noting that this is msg. # 2816. That's it. How do I register a WWW start page on my computer? Don't tell me to do it in IE7's Internet Options | General tab. The reason I'm messing with this in Word is that IE7 won't let me change my Start Page (Home Page). KB has been no help in this. Tag: word problem with paste Tag: 109306
  - 18
    - microsoft word icon disappearing out of start> programs> MS office> ???? where would it go... could it be a virus??? the program itself is still there under the office11 folder, but pinning this shortcut to the desktop of over 2000 users is very time consuming HELP!! Tag: word problem with paste Tag: 109299
  - 19
    - Word 2007 When i put graphs into MS Word 2007, the graphs appear on the page, bu when i try to print them, the graphs do no appear. The text around the come out, but just a blank spot where the graph should be. Any ideas -- E Machin ----------------------------------------------------------------------- E Machine's Profile: http://www.officehelp.in/member.php?userid=543 View this thread: http://www.officehelp.in/showthread.php?t=128015 Posted from - http://www.officehelp.i Tag: word problem with paste Tag: 109291
  - 20
    - Protect Form Button not available I am trying to design and form but after inserting a macro, the Protect Form Button is greyed out and I can no longer use the form. Any help would be appreciated. Tag: word problem with paste Tag: 109285
  - 21
    - Illegal operation in winword.exe A user has had a problem 2 times in this area. She opens a document (it's always a mail merge doc) and she gets the error illegal operation in winword.exe at 0167:301...... I've copied the file to other PC's and the same problem occurs. I've searched the MS KB but didn't find much help. Is there any way to recover the contents of the file? I've looked in the file recovery folder but there's no file. Thanks, Diane Tag: word problem with paste Tag: 109278
  - 22
    - Track Changes & Word Crashing We have a file from another company where they have added track changes. When we open the Word file, within 3 seconds it crashes, recovers itself and then crashes again, and again. It would seem that the track changes are the problem. I've looked at the forum and it's obviously corrupt and there was a helpful link to how to mend a corrupt file - Save As Webpage (which I did) and then Save back to Word (which I don't seem to be able to do - it's not on the File type list). however, even the saved as webpage version doesn't show the tracked changes so probably not any point. All the other options (check section breaks) I can't do as the file crashes so quickly - before you do anything! We've tried from a CD version of the file (in case the mail systems were corrupting it) and this has the same problem. Any clues anyone? Thanks in advance. Tag: word problem with paste Tag: 109275
  - 23
    - Text not aligning with right hand indent marker. I run Word 97 and have a recent problem whereby any entered text overruns the right hand indent marker by 2 cms exactly according to horizontal rule. I can manipulate the text to somewhere near the marker (per document), by altering settings by trial and error in (File / Page setup) but this is a very temporary setting. The left hand markers are unaffected in any way, i.e. operation and functionability. I hope I've just pressed the wrong button. I think not. Cheers for now Tag: word problem with paste Tag: 109274
  - 24
    - Word toolbars/add ins I hope someone can help. I recently reformatted my pc. Re-installed office 2003 and did all the online updates. Since then my toolbar customizations refuse to stay, the toolbars revert to the default as soon as I close/re-open word. Also, I use a program called style writer, usually there is an add in in the toolbar, but when I try to install it now, it tells me I don't have word 2003 on my system, even though I know I do. I try to copy the necessary files to the word 2003 startup folder, which brings back the tool bar add in, but tells me it can't run it because the macro is disabled. So I lowered macro security then I get a "runtime error 9 subscript out of range" error message until I delete the files I'd put in the word startup file. I've tried re-installing word and deleting the normal.dot file and it's still the same. Does anyone have any idea what's causing this and how I can fix it? Thanks in advance Tag: word problem with paste Tag: 109271
  - 25
    - Cannot not access the help function I am getting a weird error whenever I click the Help Button. I could not find the answer to my problem on the regular site so I thought I would ask here. When I click the help button it displays this error message: The setup controller has encountered a problem during install. Please review the log files for further information on the error. When I press ok to exit out of the error, it then displays this: CLView can't display Help. CLView cannot install the necessary files due to Windows installer error 33. The process cannot access the file because another process has locked a portion of the file. Tag: word problem with paste Tag: 109269
- Next
  - 1
    - documents will not save or paste I can not save documents and when I try to paste the document will no accept it -- sdrja ----------------------------------------------------------------------- sdrja5's Profile: http://www.officehelp.in/member.php?userid=538 View this thread: http://www.officehelp.in/showthread.php?t=127778 Posted from - http://www.officehelp.i Tag: word problem with paste Tag: 109268
  - 2
    - Word 2003 closes on its own shortly after opening When I open Microsoft Word (or Wordpad or an Outlook message) it closes itself after about ten seconds. If I open Task Manager after opening a Word document I can watch the winword.exe process start off using 11K of memory, then incrementally jump around 20K at a time until around 250K, at which point the application closes. I'm wondering if anyone has seen this before. Tag: word problem with paste Tag: 109267
  - 3
    - Can't Fix Corrupted Document Hi, I was working on a document on one of my school's computers which I believe was running Office (MS Word) 2k3. I saved it to my zip drive only to discover (upon opening it on a different computer in the same computer lab) that the data was corrupt and unreadable. I have never had this happen before, even when saving other documents in this fashion. I've tried both the recovery/repair solutions Word suggests as well as just about every shareware recovery program in existence, but nothing fixes the file or even returns the text. Every time I run one of the programs, it either stops responding or just claims the repair process failed, and I'm back to square one. I''m pretty much out of solutions at this point, so I was hoping someone here might have something new I could try. Thanks in advance, Tom Tag: word problem with paste Tag: 109261
  - 4
    - Word 2003 Slow Startup Recently, Word 2003 has begun talking more time to start up. Even when opening the application without a document specified, it takes 20 seconds after the application opens to when I can do something with the document (for instance, as soon as I see the blank document, I see the cursor on the empty page blink two or three times, I click on the File menu item, the blinking cursor goes away, and it takes 20 seconds before the menu dropdown appears and the cursor starts blinking again). When I open Word by clicking on a document, those 20 seconds are added to the normal time it takes to load the document. Opening an existing document within Word after the delay is over adds no further delay. None of the other Office 2003 applications show anything like this. I've tried: - starting Word by running "winword /a" - renaming Normal.dot - there's nothing in my Startup path, so I couldn't move or rename them - deleting the Data key in the registry - changing my default printer to another one that's definitely local (the prior one was definitely local, too) - turning off Journaling in Outlook - repairing Word To the best of my knowledge, this started sometime after installing Windows Defender, Microsoft OneCare, and IE7. Tag: word problem with paste Tag: 109258
  - 5
    - Default return address disappears after closing program I use Office 2003. In Word 2003, i address envelopes using my printer. When I used to use Office 2000 with Word 2000, my default return address was stored so I could use it over again. In Word 2003, to make a return address the default, you enter it in a different location (Tools>Options>User Info.). When I close Word 2003 & re-open it the next day to address an envelope, my default return address is gone & I have to re-enter it. Why is this loss occurring & how can I prevent it so my return address does not have to be entered each time I re-open Word 2003? Tag: word problem with paste Tag: 109256
  - 6
    - Why do so many questions go unanswered here? I found that posts on "error starting ms help" from months ago have never been answered. Is this list moderated? are there any resident experts or MS employees who weigh in with helpful responses? MS Office is a complex program with only online help. If you dont have constant internet access or you cant get help when the program wont access online help, you have had it. I have. -- editor Tag: word problem with paste Tag: 109250
  - 7
    - Word 2007 file saving errors 1. In Word 2007, I modify files that were originally formatted as Word 2002, Word 2003 or Word 97-2003. But when I try to "save" them, Word renounces "due to a file permission error". The only way is to "save AS" and manually re-enter the original file name. It did not help to set Word Options - Save to the default format of "Word 97-2003 document". 2. How do I "get permission" to delete the tmp files produced by Word 2007? TIA, Sven Tag: word problem with paste Tag: 109249
  - 8
    - i can not open pdf files when i try to open pdf files, they open in unreadable text Tag: word problem with paste Tag: 109248
  - 9
    - My label templates are no longer working correctly. The label templates on my computer are suddenly not working correctly. It appears as though 1 row of labels gets shifted onto a 2nd page, and when you print the page of labels, the text is no longer centered on the label, it's almost going onto 2 labels. When I opened a label template on a different computer and compared the 2 side by side, the difference I could see was that the bad template had 3 carriage returns on it, one at the very top, one at the bottom of the page and one at the end of the 2nd page. The working template only has one carriage return at the very bottom of the page. Word won't let me delete the extra carriage returns. What can I do? And any idea what caused this to happen in the first place because it seems to have infected all of my other label templates too. Tag: word problem with paste Tag: 109246
  - 10
    - Difficulties opening documents... sorta Word 2003 Windows XP Home If I use the My Documents shortcut and open a document, it works fine. If I open up word, click on the "Open" button and then click on the downpointing arrow to see the folder structure then word hangs for 30 seconds before showing the folders. Suggestions? Tag: word problem with paste Tag: 109244
  - 11
    - remove default shortcuts word 2007 my places bar One of the most annoying features of Office 2007 is that some moron at microsoft decided you want to save your files in 'my documents', 'my recent documents' and other useless rubbish bins. Although it is possible to add your own locations, it seems impossible to get rid of the damn defaults, which clutter up the bar. Why can't we decide for ourselves? The registry setting HKEY_CURRENT_USER\Software\Microsoft\Office\12.0\Common\Open Find\Places\StandardPlaces\ looks like the place to delete these buggers. But I have not managed to do it. Even if I delete the keys, they come back. Does anyone know how to utterly and forever remove these stupid places, like 'Trusted Templates'?? Tag: word problem with paste Tag: 109242
  - 12
    - Word 2003 Document Corruption I have a user that keeps having document corruption. He is able to work on the document for an extended period. Then at some point when opening it all the tables get corrupted. I am attaching a sample that is before and after corruption. I cannot determine what the cause is or how to prevent it. Any suggestions greatly appreciated. I tried to attach the files but they are too large for the news server. I can send them to someone if they want to look at them. Brian Hoyt Tag: word problem with paste Tag: 109195
  - 13
    - Word 2000 Crash My Word 2000 decided to crash a few weeks ago. It was installed as part of Office 2000, and all other programs (excel, powerpoint, etc) still work. I tried uninstalling and reinstalling, I've also gone into the regedit (with the help of a computer programmer) to make sure all of Office was gone before reinstalling, and it still doesn't work. All other programs work. Other than putting in the recovery disk and wiping my computer completely clean (which I really don't want to do) any suggestions? Would upgrading to 2003 or 2007 help? -- Audrey Tag: word problem with paste Tag: 109194
  - 14
    - doc signing - Word 2007 vs Word 2003 I have a certificate and key pair on a smart card. The certificate was obtained from a Microsoft 2003 CA on my local domain. It was created using the SmartcardUser template and I can use it for all the usual things (log onto Windows, sign/encrypt e-mail, sign Word documents, etc). I can successfully use this cert and key pair to sign Word documents with Word 2003, but I get an error when I use this same cert/key pair to sign documents with Word 2007. I traced the CSP calls that Word 2007 makes and it seems that Word 2007 is passing an incorrect parameter to CryptGetUserKey when it attempts to get a handle to the key pair associated with my certificate. Word 2007 passes a keySpec value AT_SIGNATURE to CryptGetUserKey. Since my cert and key pair is a AT_KEYEXCHANGE cert and key pair the call to CryptGetUserKey returns NTE_NO_KEY and Word 2007 errors out. Word 2003 correctly passes the keySpec value AT_KEYEXCHANGE to CryptGetUserKey and thus finds the key pair and successfully signs the document. It's been my experience with Word 2003 and previous versions of Word that the keySpec value passed to CryptGetUserKey is taken from the keySpec property of the certificate selected for signing. However, despite the fact that the 'keySpec' property on my cert is AT_KEYEXCHANGE, Word 2007 passes a keySpec value AT_SIGNATURE to CryptGetUserKey. I can successfully sign a document with Word 2007 only if I use signing-only (i.e. AT_SIGNATURE) cert/key pairs. I can't sign a document with Word 2007 with dual-use (i.e. AT_KEYEXCHANGE) cert/key pairs Is this new behavior intentional or is it a bug? Thanks, Jim Miller P.S. The Word 2007 tests were done on a Vista machine. The Word 2003 tests were done on both Vista and Windows XP. Tag: word problem with paste Tag: 109190
  - 15
    - runtime error -2147417848 (8001010a) using Word 2003 I currently have a Access application that generates multiple MailMerge Documents for printing based on the action selected. My organization has just recently went through a migration of computers, OS and Office products. My application was written in Office 2000 and now we are using Office 2003. Now when people use the application they get the following error: runtime error '-2147417848 (8001010a)' Automation error The message filter indicated that the application is busy. I have looked at the task manager (which show no current activity) and reviewed both the options tab in Word and in Access for any possible wrong settings with no success. Has anyone had this problem using Office 2003? Tag: word problem with paste Tag: 109189
  - 16
    - Folders written by Word 2000, but changed to Word 2003 Hi: By using "Micro Vault, Virtual Expander," I bakced up some folders which were written by Word 2000. This is my first computer and mostly used. However, when I tried to look at those files by clicking Icon on the second computer, the box popping up in the middle of the screen, 'Word 2003,' not 'Word 2000.' Hence, on the second computer I am not able to access the folder written by Word 2000 on the first computer. My question is: How am I able to look at the files written by Word 2000 on the second computer? Thanks for your help in advance. Tag: word problem with paste Tag: 109185
  - 17
    - Screen tips not working in Word I have transferred Office XP and my Word 2002 files to a new computer. The screen tips are not working for footnotes and endnotes in my Wor documents; that is, the pointer will flicker when over the referenc mark and very occasionally the screen tip will come up. I have enable 'Show screen tips'. Any suggestions -- patric ----------------------------------------------------------------------- patrick's Profile: http://www.officehelp.in/member.php?userid=531 View this thread: http://www.officehelp.in/showthread.php?t=127266 Posted from - http://www.officehelp.i Tag: word problem with paste Tag: 109176
  - 18
    - Text Box creation over picture in header In Word 97 on Win 98, and in Word 2000 in Windows XP at least: A floating picture covering the whole page is in the template header (set to no wrap). When a new document is created from the template, it is not possible to start drawing a text box on the normal page within the area of the picture. If the header/footer is then selected, and the main page is then reselected, it is now possible to start drawing text boxes. I would like to inform Microsoft of this fault but could see no way on their website to do so. ---------------- This post is a suggestion for Microsoft, and Microsoft responds to the suggestions with the most votes. To vote for this suggestion, click the "I Agree" button in the message pane. If you do not see the button, follow this link to open the suggestion in the Microsoft Web-based Newsreader and then click "I Agree" in the message pane. http://www.microsoft.com/office/community/en-us/default.mspx?mid=09492075-1226-44e2-abc1-01acd98eeead&dg=microsoft.public.word.application.errors Tag: word problem with paste Tag: 109163
  - 19
    - ms word 2000 - text form field character limit I have created a form in MS Word 2000 which contains text form fields for entry. I have had a customer complain that when they print the form after entry it doesn't print everything they have typed into the form field. This led me to believe that there are limitations of the number of characters that a form field can contain. Am I correct on this? If so what is the limitation and is there a work around? Thanks for your help on this. Tag: word problem with paste Tag: 109162
  - 20
    - are wombats good? I'm not really sure whether Wombats are any good. The picture on Wikipedia looks like a horrid little Pig. Quite Obscene. Just not English. 27 -- Posted via a free Usenet account from http://www.teranews.com Tag: word problem with paste Tag: 109160
  - 21
    - Problem copying from Word 2002 to Frontpage 2002 My husband has decided that he wants a web for his nearly daily writings. Similar to a blog, but with more control. He wants to be able to pick and choose from the responses that he posts. I have built a number of web sites using FrontPage 2002 and earlier versions, but I've never had this problem before. My husband sends me his formatted text with his choices of fonts... Comic Sans MS, sizes...9 pt, paragraph spacing...9pt, paragraph indentation...1 inch on either side for some paragraphs. We also figured out how to create a template with styles that he can apply to the various paragraphs in Word, and that has helped a lot. So, theoretically, all is well within Word. After he finishes saving his file, he sends it to me as an e-mail attachment. I open it and copy it into a page in FrontPage. The results vary, depending on the filetype he uses (we've been experimenting), but none produces the correct font display when that FrontPage page is viewed from Internet Explorer, Mozilla, or Mozilla Firefox. I have played around with copying it from one page to another and back again in FrontPage and also in Word, just to see if the HTML that's driving the whole business is changing behind the scenes somehow. Even in the best case, I still have to do some re-formatting, and I'm in the process of practicing with styles in FP just to make my re-formatting efforts easier. The site is http://www.blogitoergosum.net Your help would certainly be appreciated. Tag: word problem with paste Tag: 109158
  - 22
    - where are wombats? Can someone tell me whether Wombats live only in Australia, or also on other continents? Apart from zoos, of course. We all know that Wombats are to be found in Zoos. 27 -- Posted via a free Usenet account from http://www.teranews.com Tag: word problem with paste Tag: 109157
  - 23
    - word hangs with paste I've got the same problem: Copy & paste crashes, hangs Word 2002 - VanWals - Reply 17-Nov-06 05:56:02 I am using Word 2002 SP3 and installed the Office security updates (in October). I'm not sure the updates have anything to do with this, it's probably coincidental but it never happened until recently. When I copy text from an email or from a website, Word stops responding. Usually it's a large amount of text, but sometimes it can be no more than a paragraph. I don't get an error message -- the hour glass appears and stays and when I click on the X to close the Word window, "this program is not responding" appears in the title bar and then I get a message saying that the program is not responding and it closes. There is no mention of memory issues (I have lots of memory). Any ideas as to why this has started all of a sudden and how to fix it? Thanks, VanWalsh EggHeadCafe.com - .NET Developer Portal of Choice http://www.eggheadcafe.com Tag: word problem with paste Tag: 109149
  - 24
    - Bizarre behaviour in 2007 RTM When I create a spreadsheet object in Word, I can edit it no problem. When I deselect the spreadsheet and then try to edit it again, I get the following error: "The program used to create this object is Excel. THat program is not installed on your computer. To edit this object, yopu must install a program that can open the object." I have uninstalled and reinstalled Office, to no effect. I have also tried uninstalling, reinstalling and deleting all office folders (in appdata and other areas). Still no dice. I had 2007 Beta and 2007 Beta TR2 on my machine nad have never encountered this problem until the RTM. Is there any way to solve this issue or do I have to reinstall WIndows to make office work properly? Tag: word problem with paste Tag: 109148
  - 25
    - Word 2002 Crashs/Registry problem? Word (2002) appears to be working properly until trying to open or close a file. The program then locks up indefinitely, displaying the working/waiting symbol. The program has to be terminated via the task manager and the end program dialog box as it is completely locked up. When running the program again, it will autorecover the document that I was attempting to save, but repeats the above problem again when attempting to save the file or open any other file. Tag: word problem with paste Tag: 109146

word hangs after working ok. using office 2003 since it was released and now
all of a sudden it hangs up when trying to paste from an email. i have
cleaned up the computer, ran virus checker, spy checker, defrag and office
updates. it worked for a day and then hung up again, can anyone help?
thanks

Top

Re: word problem with paste by Jay

Jay
Fri Dec 15 14:19:06 CST 2006

Try http://www.gmayor.com/what_to_do_when_word_crashes.htm.

--
Regards,
Jay Freedman
Microsoft Word MVP FAQ: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

rwf99 wrote:
> word hangs after working ok. using office 2003 since it was released
> and now all of a sudden it hangs up when trying to paste from an
> email. i have cleaned up the computer, ran virus checker, spy
> checker, defrag and office updates. it worked for a day and then
> hung up again, can anyone help? thanks

Top

Re: word problem with paste by Terry

Terry
Fri Dec 15 14:22:22 CST 2006

Try using Edit, PasteSpecial, Plain Text.

--
Terry Farrell - MS Word MVP

"rwf99" <u30257@uwe> wrote in message news:6acfe275b9f27@uwe...
> word hangs after working ok. using office 2003 since it was released and
> now
> all of a sudden it hangs up when trying to paste from an email. i have
> cleaned up the computer, ran virus checker, spy checker, defrag and office
> updates. it worked for a day and then hung up again, can anyone help?
> thanks
>

Top