word 2002 error

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Application recovery CD requests WORD2002 CD. Sony Notebooks was supplied with OS, Application and Drivery recovery CDs. When Word2002 failed to run after installation of XP service packs 1 & 2, I tried to reinstall the Word2002; the application recovery CD would work OK till choosing the application to be recovered, but would eject the CD asking for WORD 2002 CD to be inserted. When Synaptic Enhancement program maimed the computer totally I recovered the original OS with the CD and still the problem with Word2002 persists. Should there have been a WORD 2002 CD supplied sepearately? What is the solution? Can Office 2000 and Word 2002 coexist - FROM:gskrao@hotmail.com Tag: word 2002 error Tag: 74081
  - 2
    - for Beth re: reply to "file".doc not available I am running Norton AV Corporate Version. As Beth suggested, I go to Options and turn off "Enable Office Plug-Ins". I don't seem to have the "options" button in the menu bar; could this be because I'm using the corporate version? I looked in the help files for "options" and found nothing. I did just install Norton just recently. Any suggestions? Tag: word 2002 error Tag: 74079
  - 3
    - Word 2002 starts and then shuts down I start the programm, it loads, but when I try to use it it shuts down. The error message is the following: AppName: winword.exe AppVer: 10.0.2627.0 ModName: mso.dll ModVer: 10.0.2625.0 Offset: 000199a6 Unfortunately, I don´t have the installation CD. I would appreciate any help. Dave ------------------------------------------------ ~~ Message posted from http://www.ExcelTip.com/ ~~View and post usenet messages directly from http://www.ExcelForum.com/ Tag: word 2002 error Tag: 74078
  - 4
    - Security Warning, Word 2002 XP Home: Word 2002: Security Warning C:\Program Files\Common Files\Microsoft Shared\Smart Tag\FDATE.DLL contains macros by Microsoft Corporation I changed ( in the Word) Tools Options Security level to Medium (or Low) then OK, window close. Open the macro Security window again and it is magically back to High! Why please? Next, which may be better overall solution is to somehow disable Word to look in the C:\Program Files\Common Files\Microsoft Shared\Smart Tag\FDATE.DLL at start up. This will be best solution leaving security level to High, but how to do that please? Will renaming C:\Program Files\Common Files\Microsoft Shared\Smart Tag\FDATE.DLL to C:\Program Files\Common Files\Microsoft Shared\Smart Tag\OLDFDATE.DLL help? Thanks, Dusko Tag: word 2002 error Tag: 74073
  - 5
    - "file".doc not available Running Windows XP and Word 2000. Occuring just recently, can't open word files saved on my C drive. Get message that reads "name of file".doc not available. It will allow me to open the file in WordPad, copy, and paste back into Word. However, when I save again in Word using another file name, I am getting the same message when I try to open the newly created file. What is going on??? Tag: word 2002 error Tag: 74065
  - 6
    - Word 2000-system is dangerously low in resources! I could use my Word program until today and when I would try to open a file I got the message: System is danerously low in resources! Would you like to terminate the following application? Microsoft Word not responding. To get our of this I have to restart the computer. In trying again I get the messages: Msgsrv32 caused a general protection fault in module USER.EXE@0003:00003bab and then, Explorer caused invalid page fault in module USER.EXE@0007:000027C8. At this point the everything is locked up and I have to turn off the computer. I am unable to copy my files to a disk because I can't open anything. Can anyone help? Tag: word 2002 error Tag: 74062
  - 7
    - Memory Access Violation - Kernel 32 Received the subject error when trying to correct a Word 97 problem. I was following the fix identified in Q290771 - "Word stops Responding when you try to start it." What can I do?? Tag: word 2002 error Tag: 74060
  - 8
    - Word 2002 I recently purchased an external floppy drive for my laptop. I can open JPEG and Excel documents directly from a floppy but not Word documents. When I attempt to open a Word document from a floppy Word does not respond. If I copy the Word document from the floppy onto my desktop and double click on the decktop icon Word will open the document. Any suggestions? Tag: word 2002 error Tag: 74059
  - 9
    - Word 2002 error Word loads, but when I try to use it, the programm shuts down. The error message is the following. AppName: winword.exe AppVer: 10.0.2627.0 ModName: mso.dll ModVer: 10.0.2625.0 Offset: 000199a6 Thanks for your help, Dave Tag: word 2002 error Tag: 74058
  - 10
    - amendment to: "unexpected critical error: can't start program" The version of word that I am using is: Word 98 on Mac OS 9.2. Thanks! Tag: word 2002 error Tag: 74056
  - 11
    - Unexpected critical error: can't start program Hello! I need help! I have a Mac G3 with 9.2 and 384 MB of ram. My problem is that whenever I attempt to launch my word program I get the error message, "unexpected critical error: can't start program". Has anyone else ever had this problem and if so, can you share with me how you fixed it? Your help is appreciated. Thanks! Tag: word 2002 error Tag: 74055
  - 12
    - Security Warning, Word 2002 XP Home: Word 2002: Security Warning C:\Program Files\Common Files\Microsoft Shared\Smart Tag\FDATE.DLL contains macros by Microsoft Corporation I changed ( in the Word) Tools Options Security level to Medium (or Low) then OK, window close. Open the macro Security window again and it is magically back to High! Why please? Next, which may be better overall solution is to somehow disable Word to look in the C:\Program Files\Common Files\Microsoft Shared\Smart Tag\FDATE.DLL at start up. This will be best solution leaving security level to High, but how to do that please? Will renaming C:\Program Files\Common Files\Microsoft Shared\Smart Tag\FDATE.DLL to C:\Program Files\Common Files\Microsoft Shared\Smart Tag\OLDFDATE.DLL help? I did not test that before answer from MVP. Thanks, Dusko Tag: word 2002 error Tag: 74054
  - 13
    - Paragraph style error - Level B refers to more than one style I have modified some Heading styles in my document and then I get the error message: Level B refers to more than one style The application will not let me set a paragraph to that style of modify the style. I can get the same effect however by chosing the next lower style and then using the left arrow on the menu bar to raise it up one level. What can I do to get rid of the error message? Tag: word 2002 error Tag: 74053
  - 14
    - Word 97 I'm running Windows XP and have Office 97 loaded. Excel, Powerpoint, etc... all work fine, but I cannot open any word docs Tag: word 2002 error Tag: 74052
  - 15
    - Typing In Word Hangs I have a problem similar to an earlier posting. When I open MS Word, I type one or two characters and then Word hangs up. After a minute or so, Word will allow me to type another couple of characters and then hangs again. The problem goes away when I open MS Word in safe mode (Start, Run, type in "winword /a", Press "Enter"). The computer I'm using has AMD's Athalon XP 1900+ processor, 1GB DDR SDRAM, Windows 2000 (SP4 and all patches), and Office XP Pro (2002 w/SP2 and all patches). Possibly related is Outlook. When I open Outlook, it also opens MS Word. If I originate e-mail, what I type in the first e-mail is displayed in the MS Word Window. After sending it, second and subsequent e-mails originated during that session are displayed in a regular message window. Does anyone have any ideas how to fix the Word problem? Is it related to Outlook? Thanks, Dave Tag: word 2002 error Tag: 74051
  - 16
    - Office 2003 files I am having problems with office 2003 in my new pc. For some reason I can't open any files, old or new from any of the office applications. Does anyone have a solution for this problem? Kind regards Tag: word 2002 error Tag: 74039
  - 17
    - Word documents disapear with a save error... When saving a document located on the server from one of=20 the clients an error message pops up telling the user that=20 there is something wrong with the disk where he or she is=20 trying to save the document. At the same time the network=20 connection is getting the red X on it as if it wasnt=20 accesible, which it is, when accesing it from explorer.=20 Thats when the real problem reveals itself, the document=20 you were trying to save is now gone. Its not on the server=20 or anywhere to be found on the local machine.=20 The event log shows nothing that can help me with this=20 problem, both server and client log is checked for the=20 specific time when it occours. The disk on the server=20 looks fine. Other shares on the same disk doesnt seem to=20 be affected.=20 This problem has occured 7 - 8 times in a couple of weeks=20 and my custommers are not to happy with it.=20 They are running a SBS2000 server, Windows 2000=20 professional desktops and Office2000.=20 Uppdated antivirus software is running on all the=20 computers in the network.=20 Hope that someone out there has seen or experinced this=20 and can give me some tips on how to fix it.=20 Thanks in advance. G=F6ran Bergegran. Tag: word 2002 error Tag: 74033
  - 18
    - 822528 Word 2002 Control toolbox reverts to design mode I can't locate the darned hotfix on the web site - only Knowledgebase articles. It requires SP 2 (I have) and I only want to download the file below. CAn someone help me with finding the file without having to contact microsoft support professional? 13-June-2003 Winwordop.msp size 3,038,032 This shouldn't be this hard.....thanks. Tag: word 2002 error Tag: 74030
  - 19
    - Word 2003- Visual C++ Runtime Library Error I can't open Word documents. Microsoft Visual C++ Runtime Library- Runtime Error- "Program:C:\Program Files\ Microsoft Office\OFFICE11\WINWORD.EXE" 'abnormal program termination' We have a new Gateway computer furnished with 'Office Basic', we are set up for (2) users. One user can use all Office programs, the other user gets the error message when trying to open Word documents. Excel & Outlook appear to work fine. I have re-installed the program and downloaded all available updates for Word with no luck. I appreciate any suggestions for fixing this problem. Tag: word 2002 error Tag: 74027
  - 20
    - Word 2002 duplex printing My last post didn't seem to appear so this is a repeat attempt to make a post. Manual duplex printing simply asks me to load the next piece of paper in the sheet feeder when it hasn't printed the first page and prints nothing else when I respond to the "OK" in the dialog box. Page setup is multiple pages 'book fold' and 'all' sheets. I am running Windows 98SE, Word 2002 and using a Lexmark 1100 printer. Auto duplex printing seems to work OK, but is only suitable for a different printer and so is no use to me at the moment. Does anyone have any suggestions? Tag: word 2002 error Tag: 74015
  - 21
    - winword error it tells me eorror when I open word 2000 it says winword has caused an error in winword.exe can you help me? Tag: word 2002 error Tag: 74014
  - 22
    - Saving document problems-write protect/read-only I added microsoft word to my microsoft works suite and I can't seem to get it to work properly. I am having trouble saving any of my work to a cd-rw. Everytime I try to save my work the message comes up: write-protected or read-only. I teach school and I really don't want to have to change the name and save my lesson plans everytime I try to exit! How do I get it to let me save changes so that the only time I create a new file is when I start a new week? Tag: word 2002 error Tag: 74013
  - 23
    - so confused about write protect i have been reading about write-protect. I still don't understand how the disc got "write-protected" in the first place. I know my cd-rw is not full but I keep getting an error that my changes to a file can't be changed or copied because of a write protected cd. Tag: word 2002 error Tag: 74011
  - 24
    - Word Opens Slowly I am still having trouble with Word and wonder if anyone has new ideas. It opens slowly and if I interrupt it opening by trying to click, it may freeze. Otherwise it works fine, just opens and closes slowly. If I open it in winword.exe /a, it does fine. I have tried deleting normal.dot, the registry data key, and have deleted temp files. If I look for Add-ins, including the Com add-ins, there has never been anything in the windows. I wonder if Adobe or Symantec has left something somewhere--but where and what could be causing the conflict? I am using NAV Corporate Edition, and Adobe Reader 6.0. Thanks. Tag: word 2002 error Tag: 74008
  - 25
    - word 2000 I click on word 2000. It opens. Norton 2004 scans at botom of screen. No page comes up and screen goes white then message "Word has encountered a problem and needs to close. We are sorry for the inconvenience. The eror reporting states: App ver. 9.0.0.2717 mod vbe6.dll mod.ver 6.0.84.35 offset 0004eaf1 exception info code 0x000 000 5 flags 0x00 000 000 record ox oooo oooo oooo oooo address 0x000 000 00 6504 What the? Tag: word 2002 error Tag: 74005
- Next
  - 1
    - MS Word version I am using windows 98 and I have MSoffice 4.2 which includes Word 6.0c. When I get documents from others, they are not formatted properly. Most of the information is just a bunch of symbols and I can't read the document. I think I need to upgrade my Word product. I tried to load Word 2000 and it would not take on my system. What version of Word can I upgrade to be able to read documents sent to me in higher versions? Also, where can I obtain the vesion of Word that is then suggested? Tag: word 2002 error Tag: 74004
  - 2
    - can not access address book I hope some one out there has the answer to the address book problem. I have windows xp and word 2002. When I want to access the address book I in word I get a message saying I have to log on to microsoft exchange. I don't have microsoft exchange , that I know of. Is there anyway around this problem? Thanks so much. Tag: word 2002 error Tag: 74002
  - 3
    - Page borders in Word Office 2000 Using an hp psc 1205 printer, I cannot print a complete page border - the bottom section is cut off. How can I rectify this? I have tried all variations of page set-up to no avail Tag: word 2002 error Tag: 73998
  - 4
    - Word Closing Document Without Prompting To Save Hi, I'm using Word 2000 and just recently noticed that when I close a document that I've been editing, Word is closing it without prompting me to save the changes. Sure enough, when I reopened the same document, all the changes that I'd made to the document were gone. Is this symptomatic of a macro virus? Any advice appreciated. Please reply to newsgroup. Tag: word 2002 error Tag: 73994
  - 5
    - how do i download word for windows me i am in the middle of switching files to a different computer and somehow WORD no longer works. It asked me to get the program off the cd - i dont have the cd. can i download WORD from online and where? thanks Tag: word 2002 error Tag: 73990
  - 6
    - dictionary I try to use the dictionary but when i do, it says that i'm not connected to the internet but I am! What do i do? Tag: word 2002 error Tag: 73989
  - 7
    - document not registered I appreciate it a lot if ayone could help me solving the following problem only the last two days everytime I open a document with word I get the message cannot open document is not registered. I click ok and can't Word doesn't work properly for instance I can't copy and paste. I need your help, I am so frustrated and I use Word a lot. Thanks Tag: word 2002 error Tag: 73985
  - 8
    - duplex printing in word 2002 With page setup, pages, as 'book fold' and, sheets set as 'all' I was trying to do duplex printing but had problems. 1. Checking the Manual duplex box for printing produces a message to reload the printer manual feeder, but it prints nothing at all. Any suggestions here? 2. Auto duplex printing on my one-side-at-a-time Lexmark 1100 printer prints the pages in the right place but on separate sheets of paper instead of being back-to-back. It appears Word assumes a printer capable of printing both sides of the page at once. How do I get Word to automatically print page 12,1,2,11,10,3,9,4,8,5,7,6 automatically, but with the necessary turning of pages after page 3? Tag: word 2002 error Tag: 73984
  - 9
    - Find dialog problem I have Word2000 with Win2000 as OS. When I open Word and type some text and go for Edit Find, the Find dialog box comes up but the Word document that I have becomes minimized. I tried Format, Font. I tried File, Print, etc-all these dialog boxes are ok. I removed norton to see. It helped a bit.In previous docs I do not have this behaviour. But if I open Word and create new document I have this problem. Please suggest. Tag: word 2002 error Tag: 73980
  - 10
    - Delete key not recognized in Word 2000 With text selected, pressing the delete key once or many times does nothing. The backspace key works immediately unless the delete key has just been pressed, in which case backspace takes two presses to work. The delete key works normally on unselected text in Word, and on selected text in a message like this one. If anyone has a suggestion, it will be much appreciated! Thanks, Ed Tag: word 2002 error Tag: 73978
  - 11
    - TOC \p I am trying to careate a Table of Contents with the page number right after the entry (not in the right column) WHAT I GET Contents Boy meets girl 1 Boy falls in love 7 Boy looses girl 12 Boy gives up 15 ONLY ONE SPACE BETWEEN HEADING AND NUMBER, I WANT MORE WHAT I WANT Contents Boy meets girl 1 Boy falls in love 7 Boy looses girl 12 Boy gives up 15 the \p option will allow me to change only the FIRST char. Example: TOC \p "xyz" gives me Boy meets girlx1 Boy falls in lovex7 Boy looses girlx12 Boy gives upx15 I am running: WS Word 2000 (9.0.2720) from help: Field codes: TOC (Table of Contents) field { TOC [Switches ] } \p "Separators" Specifies the characters that separate an entry and its page number. For example, the field { TOC \p "---" } displays a result such as "Selecting Text- --53." The default is a tab with leader dots. You can use up to five characters, which must be enclosed in quotation marks. Tag: word 2002 error Tag: 73975
  - 12
    - Horizontal & Vertical rulers missing in Word 2000 Hello, I am using Word 2000 and in the Print Layout both the top and side rulers are missing. I went to Tools. Options and the the Vertical Ruler is checked. How do I get the rulers to show up in the print layout? Thanks! Tag: word 2002 error Tag: 73972
  - 13
    - Wd2002 will not open When trying to open Word 2002 from the top of the start menu, it will not open. It will only put a blank button on the task bar like a program is open. I cannot close the button by right clicking. If I do a ctrl-alt-del, it says "Osa [not responding]". If I choose this and end program, it will close the button. I can open Word from start-menu - programs. Tag: word 2002 error Tag: 73970
  - 14
    - WORD 2000 Hello! Hoping someone can help me with Word 2000 problems. Each time I try to start Word 2000 it opens, then a box comes up with the following: THIS APPLICATION MUST BE INSTALLED TO RUN. PLEASE RUN SETUP FROM THE LOCATION WHERE YOU ORIGINALLY INSTALLED THIS PROGRAM. Unfortuntaley I cannot find a setup file in their. Does anyone know how I can correct this? Thanks so much! Danny Tag: word 2002 error Tag: 73966
  - 15
    - Page Numbering doesn't print what I am seeing on the preview I have my page numbers set as "Page 1 of 5, Page 2 of 5, Page 3 of 5, etc." All of a sudden... ALL my word documents are previewing like they should be - but printing as: Page 1 of 1, Page 2 of 2, Page 3 of 3, etc I have had this document FOREVER and this has NEVER been a proble... I am embarrassed to admit I have NO IDEA what is causing this HELP (And THANKS!) Tag: word 2002 error Tag: 73964
  - 16
    - cannot make Word my default program Whenever I open a Word document, it opens with WordPad,unless I right-click and go through the "Open with Word" routine. (This just started happening; I have no idea how I changed the default.) How can I change it back, so everything just opens with Word? Tag: word 2002 error Tag: 73959
  - 17
    - Save in in Save AS slow to respond Office 2002 in Word and powerpoint Click on save as or (save on a new document), then click on SAVE IN when the dialog box opens. It takes about 50 seconds for the save in box to respond and drop down. After that it works fine until the program is closed and reopened. If I click a second time before it responds the app hangs. Tried reinstalling Office 2002 and it did not help. Excel and access work fine. Can't find any info in KB's or newsgroups Tag: word 2002 error Tag: 73955
  - 18
    - Microsoft Word Problem This morning I opened my computer and opened Microsoft Word to get a blank document to prepare a letter. When I click on the icon it opened but it had a letter that I prepared on Wednesday, which had been named and closed. No matter what I do delete, clear or whatever that letter comes up when I open word, what can I do to correct this Tag: word 2002 error Tag: 73954
  - 19
    - Distorted page display in Print Layout View Hello I'm running Word 2003 though I once had this problem in Word XP. In print layout view, the size and shape of the page is wrong. It looks like an 8 1/2 by, say 9" tall page, instead of the 8 1/2 by 11" page that it ought to be. I tried deleting Normal.dot, but that didn't help. In the past, I could call up an old letter and it would display correctly. Now, though, that isn't working either. Everything else seems to work fine. If I go to reading layout view or print preview, things look fine. The printed document looks fine too. It's only in the print layout view that things are displayed incorrectly. Any help? Tag: word 2002 error Tag: 73953
  - 20
    - Class already exists I am using Visual Studio Tools for Office with Word 2003 on XP Pro. In the code behing page, I open a dialog window for information. This window opens and closes just fine but randomly I get an error paerforming the form.showdialog whcih returns the following : "System.ComponentModel.Win32Exception: Class already exists at System.Windows.Forms.WindowClass.RegisterClass() at System.Windows.Forms.WindowClass.Create(String className, Int32 classStyle) at System.Windows.Forms.NativeWindow.CreateHandle(CreateParams cp) at System.Windows.Forms.Control.CreateHandle() at System.Windows.Forms.Form.CreateHandle() at System.Windows.Forms.Control.get_Handle() at System.Windows.Forms.Form.ShowDialog(IWin32Window owner) at System.Windows.Forms.Form.ShowDialog() at WordTemplateProject1.OfficeCodeBehind.ThisDocument_New() in D:\TestApps\WordTemplateProject1\ThisDocument.vb:line 132" Has anyone experience this error or have suggestions on the casue? Dialog being shown has two text boxes and two command buttons. No processing is being performed in the form since it is just part of a demo. TIA for any help or suggestions Tag: word 2002 error Tag: 73952
  - 21
    - Error 1706: No valid source.... I have a computer with WinXP and Word 2000 plus Excel 2003/Outlook2003. We need Word 2000 for a specific application. Everything was fine until I did the updates for the Word2000. We have the users as restricted but did the updates as Admin. When starting Word as a restricted user, it give the error: "Error 1706. No valid source could be found for product Microsoft Word 2000 SR-1. The Windows installer cannot continue." It will only give this error when logged in as the restricted user. I don't want to give the users any more rights than they absolutely need so how can I get around this? I found the KB article relating to something similiar but it didn't work. I have tried to see what part of the registry is being accessed so I can change the values if necessary, but no luck. I hope someone can help me. Thanks in advance, Jerry Tag: word 2002 error Tag: 73946
  - 22
    - Word freezes? I recently changed a few things on my system and now I can't get word (from office 2000) to work. My system freezes completely, and when I press ctrl/alt/delete - it says I'm dangerously low on resources - Wierd because I have tons of space left on all drives. I even removed office 2000, then reinstalled it, but still the same problem with word? Maybe it's a template problem, since I deleted a couple last week? Any help would be greatly appreciated. Gareth Tag: word 2002 error Tag: 73943
  - 23
    - CD Key not recognized I am trying to reinstall Office 2000 Upgrade. All is fine, except Word asks for the CD key, and doesn't accept the key on my jewel case. No chance of it being the wrong copy with this jewel case. Suggested solutions? Thanks Louis Tag: word 2002 error Tag: 73936
  - 24
    - Word cannot complete the save due to a file permission error Hi everyone, Has anyone come across this problem? It seems to have started after linking a BMP file in my DOC. Removing the link to the BMP clears the problem. Thanks Tag: word 2002 error Tag: 73929
  - 25
    - Word 2003 When I exit Word 2003, I receive the following VB error: Object variable or With block variable not set (Error 91. Though I have not changed anything, I am not a programmer. Tag: word 2002 error Tag: 73927

When I'm shutingdown word I get this message:

AppName: winword.exe
AppVer: 10.0.2627.0
ModName: vbe6.dll
ModVer: 6.3.91.8
Offset: 000192d1

Top

Re: word 2002 error by Suzanne

Suzanne
Mon Jan 05 09:12:29 CST 2004

See section 2(d) of
http://www.mvps.org/word/FAQs/AppErrors/ProbsOpeningWord.htm

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://www.mvps.org/word
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"ivana" <ivana@algebra.hr> wrote in message
news:061201c3d381$cd025570$a401280a@phx.gbl...
> When I'm shutingdown word I get this message:
>
> AppName: winword.exe
> AppVer: 10.0.2627.0
> ModName: vbe6.dll
> ModVer: 6.3.91.8
> Offset: 000192d1
>

Top