creating web folder in word
Hi All,
I am using word 2000 windows xp sr2.
I would like to know if it is possible to create a new folder on my web site
from within word? I can log into the site using word but, I don't know if I
can create a new folder on it. Any help would be appreciated. thanks,
--
Regards, Gary Metzler
Outta Sight Travel, Inc.
610 NW Marion Ave.
Port St. Lucie FL 34983
Phone: 772-336-8747
send to: gmtravel@bellsouth.net
http://www.outtasighttravel.com
Msn messenger: gmetzler1150@hotmail.com
Skype name: garymetz Tag: lost Office 2003 when I backed up in Vista OS Tag: 113916
Corrupt fonts?? MAC
All of a sudden Word (Mac version 11.3.6) will not completely open. First I
had a bunch of "corrupt font" windows open, I mean like a lot. Then I
forced quit because it would not stop popping up (saying a different font
each time). Know It just starts to open and starts the beach ball swirl and
nothing??? Any ideas.
I have a quad core MAC Pro Tag: lost Office 2003 when I backed up in Vista OS Tag: 113914
Word 2007 crashes with the following error:
AppName: winword.exe AppVer: 12.0.4518.1014 AppStamp:45428028 ModName:
unidrvui.dll ModVer: 0.3.1296.1 ModStamp:411096b7 fDebug: 0 Offset: 0000bf65
Any ideas what this could be?
I have been trying to fix this since this time yesterday morning and nothing
is working. I have tried uninstalling and reinstalling and I have read all
of the Microsoft help files. Nothing is working. I use Word everyday for
work, so when it crashes, I lose money! Can anyone help me? Tag: lost Office 2003 when I backed up in Vista OS Tag: 113909
Custom toolbars not saved; Adobe-related fix doesn't work
Word 2003 (Pro) has stopped saving custom toolbars and toolbar locations.
Every time I start it, I have to turn off the same toolbars and move them
around to where I want them.
The fixes that I have found, related to the Adobe 7.0 toolbar, don't work.
For one thing, I have only ever had the free Reader and not full-blown
Acrobat, so I've never had the toolbar installed in the first place. I had
not made any changes to the software that I'm aware of, other than MS
updates, before the problem started. Updating Adobe Reader itself did not
resolve the problem. Holding down shift then going to "save all" doesn't
seem to have any effect, either--although it saves normal.dot, the toolbars
are still all over the place when I open Word again.
Am I looking in the wrong place for the solution? All the answers I have
found in searching the internet seem to be related to the Adobe Acrobat
toolbar. Tag: lost Office 2003 when I backed up in Vista OS Tag: 113907
I cannot type single line format in a document. Word has taken o
While typing a legal document I was using a three line separation between the
end of a paragraph and the succeeding "header". After a while, word began to
insert a three-line break between each paragraph irrespective of insertion of
a header.
At this point I cannot reset the line spacing to single line. I enter
single line in the format/paragraph area, but the space between lines in the
document continues to be double at the least. Also, a tiny black square now
appears at the left margin of each line. I don't know what I did to bring up
this black square, but I cannot delete it and I think it has something to do
with my inability to control the line spacing.
I would appreciate hearing from anyone who has experienced similar problems
and can help me regain control of my document. I am using Word 2003.
Thank you Tag: lost Office 2003 when I backed up in Vista OS Tag: 113895
Recipients can't open Word 2007 Documents
Recipients can't open word 2007 documents sent as attachments. Attachments
show a .docx suffix once received. What can I do to fix? Tag: lost Office 2003 when I backed up in Vista OS Tag: 113891
formatting in document is too complex
I am having a similar issue. The document I am opening is a .docx and when
using Word 2000 I get the message that the doc is too complex. I have the
2007 compatibility fix loaded on the station. The numbering in the doc
appears to get out of wack too. I don't seem to have a problem with this on
my 2003 station. Any ideas what this could be? Tag: lost Office 2003 when I backed up in Vista OS Tag: 113885
e-mail signature
I added a new e-mail account to my Microsoft Office Outlook, and changed word
to the default editor, but now the e-mail signatures won't work. In the
e-mail options box it says "select the signatures associated with" and has
the new account's mail server in the drop down box. I think that's why it's
not working. How can I change the info in the drop down box to the old mail
server. Also I looked in control panel under mail and it shows the old mail
server as the only account, but when I go to tools, e-mail accounts in
Outlook it only shows the new account's mail server. Tag: lost Office 2003 when I backed up in Vista OS Tag: 113882
Save problems
Everytime I try to use "Save As" on new documents it closes Word and loses
most of the document (back to last auto save). When I reopen Word I can try
to use the restore , but often there is a large part of the doc missing. I
have tried just using "Save" on default Document 1 name, but this sometimes
does the same thing. Is this a bug and is there a patch? Tag: lost Office 2003 when I backed up in Vista OS Tag: 113858
how to close dialog box
Every time I tried to close my computer I get the message I can't close word
before first closing a dialog box, I don't think I have one open, how do I
get rid of it Tag: lost Office 2003 when I backed up in Vista OS Tag: 113856
How can I stop Word reverting to another font when I am typing
When I am typing in Word I sometimes delete a word or space only to find that
a whole paragraph leaps back into Times New Roman 10 italic, when I was
happily typing in Arial 12. Sometimes when I cut and paste within a document
the font changes. Sometimes when I insert a file into a larger file the font
changes.
It drives me mad. What can I do? Tag: lost Office 2003 when I backed up in Vista OS Tag: 113849
2000 won't open
I have Word 2000 that will not open. I know others have had the problem too,
and you suggest http://word.mvps.org/FAQs/AppErrors/ProbsOpeningWord.htm.
I've been there several times and done EVERYTHING suggested to fix the
problem. Still won't open. I've repaired about 3 times, I've uninstalled
and reinstalled; and I've run my virus program. Nothing works. What now?
The only time it will open is if I go to Start/Run/winword.exe /a. But, that
only works each time I do that, it doesn't repair the problem. it is
suggested not to continually open word using that method. What can I do now? Tag: lost Office 2003 when I backed up in Vista OS Tag: 113846
how can i repair the trnslation system
hi,
Can I ask for your help?
I used to use the word dictionary, but it doesn't work now, I don't know why.
And this is the message that appears (The service could not respond. Ensure
the service is installed and try running Detect and Repair (Help menu) before
you use this service again).
So please if any one can help I'll be thankful.
Best Regards,
Hadeer Tag: lost Office 2003 when I backed up in Vista OS Tag: 113845
The Word 2007 slows down after I insert a comment
I am using a trial version that comes with toshiba satellite notebokes. Every
time I insert a comment the Word 2007 slows down. If the documents has
comments there is no problem, until I insert a new one. Tag: lost Office 2003 when I backed up in Vista OS Tag: 113844
what will you do for unrecognized charectors appearing in the word
2003 microsft word. i have unrecognized charector ( appear like a Pie sign)
appear in the beginning of each sentence as i type anything with 2003 word. i
tried hard to get rid of by deleting everytime, still does not go! what
should i do? Tag: lost Office 2003 when I backed up in Vista OS Tag: 113841
Excel 2007 crashes when opening a file
I recently installed the trial version (hopefully, because paying that
much money for a non-working software would have killed me) of MS
Office Home & Student on my brand new laptop (Acer Aspire 5684, Vista
Home Premium). Everything seems to be working fine except that
litteraly 99% of the time I try to open an file created with a
previous version of Excel (that is .xls files, created either by
OpenOffice or old versions of Excel), Excel 2007 just crashes with the
following problem details :
Problem signature:
Problem Event Name: APPCRASH
Application Name: EXCEL.EXE
Application Version: 12.0.6024.5000
Application Timestamp: 465f21c3
Fault Module Name: OLEAUT32.dll
Fault Module Version: 6.0.6000.16386
Fault Module Timestamp: 4549bd95
Exception Code: c0000005
Exception Offset: 000041c0
OS Version: 6.0.6000.2.0.0.768.3
Locale ID: 1033
Additional information about the problem:
LCID: 1033
Brand: Office12Crash
skulcid: 1033
Interestingly, it doesn't crash so often (if at all) when loading
Excel, the opening the files via the menus. But still, this is very
very annoying. Anyway, until this problem is resolved, I won't buy the
unlimited version of Office...
If anybody can help...
S.M. Tag: lost Office 2003 when I backed up in Vista OS Tag: 113839
Compute Statistics function fails to work
I have a VBA macro that uses the ComputeStatistics method to calculate the
page that a paragraph is on like so:
Set myRng = myPara.Range
myRng.Start = 0
intPage = myRng.ComputeStatistics(wdStatisticPages)
and it works great for almost all the Word documents that I use it on,
however I have one file that simply will not calculate the statistics on a
Range (even the currently selected Range). In this file, the
ComputeStatistics method always returns 0 for every statistic type in every
range that I create. I tried adding the Word Count toolbar to the file and I
noticed that the Word Count toolbar always shows the page or word count for
the entire file - never for the current selection; wheras in other files the
Word Count toolbar shows the statistics for the currently selected range.
Does anyone know why the ComputeStatistics method would fail in a particular
Word file? The files I'm working with have essentially got the same layout,
they're based on the same template and use the same styles. I'm working in
Word 2003 on Windows XP. Tag: lost Office 2003 when I backed up in Vista OS Tag: 113838
Word only prints part of page
On one document, Word only prints part of the page - the "Heading 1" heading
and the bullets, but none of the other text whatever. It prints a couple of
other documents just fine.
I cut and pasted the text via Notepad into a new document. This printed OK
until I format ed the heading as "Heading 1". Then this document too printed
in the same messed-up way.
I assumed the problem was a corrupt normal.dot. I'd had an error message
about this a week or so ago, but no sign of any problem until now. So I
deleted normal.dot and allowed Word to build a new one, which is all I
thought I had to do to un-corrupt it. No joy, still prints only the heading
and the bullets.
Any suggestions gratefully received.
Andy W Tag: lost Office 2003 when I backed up in Vista OS Tag: 113837
office word wont open says installation file ZA561402.CAB is miss
i CHANGED FROM ADMINISTRATOR TO USER IN MY WINDOWS XP AND SINCE WHEN I TRY TO
OPEN AN ATTACHMENT SOMEONE SENDS ME OFFICE WORD ERROR COMES UP: REQUIRED
INSTALLATION FILE ZA561402.CAB IS MISSING.I CAN'T FIND IT.DOES ANYONE KNOW
THANKS. Tag: lost Office 2003 when I backed up in Vista OS Tag: 113827
Error: No printer found.
Hi:
Can you please tell me HOW do I solve the above error; the printer is
there
- Lexmark Z82 - and I can print test page; is something wrong with the
registry; I unistalled and reinstalled the drivers, printer, but still
no
luck?!
Also, I cannot print from other docs. as well?! I have XP home and MS
Office 2003.
Thanks,
> >> > Dan Tag: lost Office 2003 when I backed up in Vista OS Tag: 113825
Drag-copy of MT equation from one table cell to another produces e
Operating environment:
Windows XP
Windows Vista
Microsoft Word 2007
MathType 6.0a
Equation Editor 3.0
This describes a problem where Word 2007 crashes upon attempting to
right-click-drag-copy MathType items from one table cell to another. This
happens with MathType and Equation editor objects only. When attempting to
select-right-click-drag-copy from one cell to another Word Crashes with the
following:
Problem Event Name: APPCRASH
Application Name: WINWORD.EXE
Application Version: 12.0.4518.1014
Application Timestamp: 45428028
Fault Module Name: mso.dll
Fault Module Version: 12.0.6017.5000
Fault Module Timestamp: 461db01f
Exception Code: c0000005
Exception Offset: 0004afee
OS Version: 6.0.6000.2.0.0.256.6
Locale ID: 1033
Additional information about the problem:
LCID: 1033
Brand: Office12Crash
skulcid: 1033
This problem does not happen with earlier version of Word. Tag: lost Office 2003 when I backed up in Vista OS Tag: 113824
"exceeded pages" error message
In Word 2007 WP: I'm suddenly getting a locked program with error: You have
exceeded the number of pages that can be supported by microsoft word. There
should be no page number issues with these documents. Occurs after work in
document for 5-10 minutes. Tag: lost Office 2003 when I backed up in Vista OS Tag: 113823
Word Crashes daily (and then some)
For years, I have had to deal with MS word crashing on me daily. I have spent
hundreds of dollars on upgrades to no avail, and technical support people
have never been able to help, even when I can understand their English. Now,
the upgrade to Office 2007 trial version does not even offer support! What
kind of company is this that will gladly take my money for a product that
does not work and then not give me decent technical support? I thought to try
the trial in hopes that it would correct the crashing problem, but it is as
bad or worse than before. ANY ONE OUT THERE HAVE a CLUE ABOUT SOLVING THIS
PROBLEM
From Ready-to-switch-to-Mac-any-day-in-PA! Tag: lost Office 2003 when I backed up in Vista OS Tag: 113822
Conflict with Word & Outlook
I use Office Pro 2003 - If I open Word before I open Outlook, then the Word
window opens fully in the screen. Sometimes though, when I close a file (not
exit), Word closes entirely. Also, if I open Word after I open Outlook, then
Word will not fill the screen and you cannot move it up to the top of the
screen or use the maximize button to make it bigger. Is there a patch for
this problem? Tag: lost Office 2003 when I backed up in Vista OS Tag: 113819
Slow start
When I start Word (MS Office 2007 Professional) it takes way to long time. It
says Configurering installationsfiles, but it´s not the first time I open the
program.
I have tried to reinstall. All my other Office 2007 programs starts up fast.
My home version has no problems.
Can anyone help ? Tag: lost Office 2003 when I backed up in Vista OS Tag: 113818
Word baseline shifts after inserting a Windows Meta File into Word
Operating environment:
Windows XP and Windows Vista
Using Microsoft Word 2007
This describes a situation where the inclusion of a windows Meta file (WMF)
causes any following text baseline to shift downward. (In this case, to
create the WMF Iâ??m using Design Scienceâ??s MathType 6.0a) The problem
manifests itself after the document has been saved and reopened. Clearly the
cursor is using the bottom edge of the WMF bounding box as a reference point
for the baseline following it. Since itâ??s entirely possible for a WMF to
occupy more vertical space than the typical line height, this is not
acceptable.
To reproduce the problem:
1. Launch Word 2007 and type some text.
2. Insert any WMF (MathType or other) at the end of the text line.
3. Save and close the document. Then reopen it.
4. Place the cursor to the right of the WMF and begin typing.
Note the baseline is now aligned with the WMF bottom boarder of the bounding
box and more importantly, is now out of line with the text that precedes the
WMF
Additional information to consider:
- This problem does not occur with versions of Word earlier than 2007
- This problem does not occur if the document was saved from 2007 to a
pre-2007 format
- This problem occurs with the inclusion of WMFs regardless of origin (Not
just MathType)
Iâ??m not looking for a quick fix per se; rather Iâ??d like to know what changed
in 2007 to cause this? Was it a design decision or is this a bug in Word? Has
anyone else experienced this same problem and reported it? What was the
response? Tag: lost Office 2003 when I backed up in Vista OS Tag: 113817
Adding items to QAT while viewing .doc files causes QAT item to di
Operating environment:
Windows XP
Windows Vista
Microsoft Word 2007
This describes a problem where additions made to the Word 2007 Quick Access
Toolbar while viewing .doc files do not persist after closing and
re-launching Word. Note that this problem only manifests itself when adding
third-party items to the QAT, not when adding Microsoft Wordâ??s ribbon
elements to the QAT.
Steps to reproduce the problem: It will be necessary to have any of the many
third party add-ins installed. In this particular case, we are using our
MathType 6.0a
1. Launch Word 2007 and open a pre-2007 file (.doc).
2. While viewing the .doc file, choose any of the buttons located under the
MathType tab in the Word ribbon. Right-click it and choose, Add to Quick
Access Toolbar.
3. Close Word.
4. Launch Word either from the Start menu or by double-clicking the original
.doc file.
5. Note the item that was added to the Quick Access Toolbar doesnâ??t persist.
It has been suggested that Word 2007 has the ability to save Quick Access
Toolbar items either in the context of a specific document, or such that it
is available in every session of Word. However in this test the saved item
does not persist in the original .doc file or in any new or subsequent
session of Word. Tag: lost Office 2003 when I backed up in Vista OS Tag: 113815
MS Word 200 Error
Hi All,
I am getting this error message when I try to launch Ms Word:
"The BKOLET component is missing. Please contact your System Administrator".
I was wondering if someone has encountered this and how do you fix it?
Thanks
--
Jahrzee Tag: lost Office 2003 when I backed up in Vista OS Tag: 113814
Bug in Office Word 2007
1. Open a text document in word 2007
2. Select all text.
3. Press 'word count' button on the Review/Proofing area
4. See how Character count and several other figures are misreported
(last character cut off)
Example:
http://i13.tinypic.com/4uneesn.png
Workaround. NEVER select text in a document when trying to count word/
character numbers, Word 2007 will cut off the last digits. Tag: lost Office 2003 when I backed up in Vista OS Tag: 113810
Opening Word 2007
Just upgraded to Vista and Office 2007 (1 of 15 in our office) and find it
impossible to open Word 60-70% of of the time. I navigate from the Windows
logo bottom left to Programs to Microsoft Office to Word 2007.
A dime Word background appears then immediately a window:
"Microsoft Office Word has stopped working. Windows is trying to recover
your information" - the window changes to...""Microsoft Office Word has
stopped working. Windows will close the program and notify you if there is a
solution - it freezes there so that the "Close Program button must be clicked.
Then a window appears with the full path and says the file cannot be found.
Try typing it in again correctly - although nothing was ever typed in.
I have uninstalled and installed the entire Office application several
times. My only solution is to keep trying until eventually it opens and then
never close Word.
Any suggestions would be greatly appreciated. Tag: lost Office 2003 when I backed up in Vista OS Tag: 113806
Copy hyperlink error in Word 2007
Hyperlinks are not copied and/or pasted correctly in Word 2007.
Here's my process:
1. I right click on a hyperlink in Word 2007 and select "copy hyperlink".
2. I click on text where I need to paste the hyperlink to.
3. I click hyperlink, which opens a dialogue.
4. I press Control V to paste in the hyperlink.
5. The hyperlink is wrong.
This is for hyperlinks that are extremely long. I cannot shorten the length
of the hyperlink or provide an example because this is a document from a
client.
----------------
This post is a suggestion for Microsoft, and Microsoft responds to the
suggestions with the most votes. To vote for this suggestion, click the "I
Agree" button in the message pane. If you do not see the button, follow this
link to open the suggestion in the Microsoft Web-based Newsreader and then
click "I Agree" in the message pane.
http://www.microsoft.com/office/community/en-us/default.mspx?mid=7156788b-7895-4a31-9ba1-0383e59abfae&dg=microsoft.public.word.application.errors Tag: lost Office 2003 when I backed up in Vista OS Tag: 113802
How can I convert a .docx document to a .doc document?
I sent a word document to someone and when it was revised, it was returned
as a .docx. What software would I need in order to open document? Tag: lost Office 2003 when I backed up in Vista OS Tag: 113799
Word for Mac - missing Tab command
Starting several weeks ago, I no longer have a "Tab" command within the
"Format" menu of Word. Thinking that perhaps I had forgotten something
simple, I went to the Word help menu, and was instructed that the Tab command
is in the Format menu. But it is absolutely not there. The list in the Format
menu includes character, paragraph, section document, and numberous other
items, but Tab is nowhere to be found. Where could it possibly have gone? I
used to use it all the time.
I am using an iMac G-5, running Mac OS 10.4.10, with Office 2004 for Mac.
I had upgraded to Word 11.3.5 and just this morning to 11.3.7. But still no
Tab command. I keep thinking I'm missing something obvious, but can't figure
out what it is. Any help would be appreciated. Thanks. Tag: lost Office 2003 when I backed up in Vista OS Tag: 113794
word locks up if place hand on keys for 8 sec w/o typing, why?
Co worker says word locks up if he places hands on keyboard without typing.
He said there was an error message that said something about 8 seconds.....
He couldnt give me complete message or error #. How do you unlock work
document so you can continue? Couldn't duplicate what he did. Tag: lost Office 2003 when I backed up in Vista OS Tag: 113792
Word 2007 - Unable to use mouse to select text
Running Vista - Home Premium and downloaded the latest updates for Vista and
Office that came out this morning 8/15/07. Since updating I am unable to use
my mouse to select a point in a document or highlight text. I can only use
it to change options in the toolbars at the top and sides of the screen. Can
still use keyboard arrow keys to naviagate my way around.
Any help would be appreciated. Tag: lost Office 2003 when I backed up in Vista OS Tag: 113791
font
I am selecting text and trying to set them to Arial, however, even though the
font reads 'Arial' or whatever I choose, the font remains as Cambria.
Any idea how to resolve this so that I have the font set as Arial? Tag: lost Office 2003 when I backed up in Vista OS Tag: 113786
Pl timer error message
Every time I open word I get "cannot create PLwrdtmr.PLTimer Error =
-2147024770 Automation error The specified module could not be found"
After I cancel the error message, it pops back up a couple of times then
finally goes away. This did not use to happen and I have no idea why it's
doing it now. Is it possible it's a conflict with another program (I also
run PC Law software)? Tag: lost Office 2003 when I backed up in Vista OS Tag: 113782
Inserted objects don't display
Any objects (charts, pictures, hyperlinks, TOC entries, captions tec.) do not
display. Instead of the text or picture that should appear, a description
such as the following appears in it's place:
{ EMBED Excel.Chart.8\s }
These objects print as they should, but do not display. I have unchecked the
'Picture Placeholders' option already.
Can anyone help please? Tag: lost Office 2003 when I backed up in Vista OS Tag: 113778
Document map does not navigate when clicked
I have a large MSWord document previously created in Word2003.
When I convert this file to the 2007 format and open it the document map
will display, but I cannot use it to navigate the doc.
I also cannot use outline view (it says there is not enough memory, and
since I have 4GB that seems unlikely).
Both still work fine in compatibility mode with the 2003 file.
Any suggestions?
Running XP Pro with all updates, twin dual core Xeon 2GHz processors
Thank you
Ian Tag: lost Office 2003 when I backed up in Vista OS Tag: 113777
why are auto text categories empty
Why are the auto text categories empty when I try to use the auto text
function to insert saved phrases and standard Word phrases.
This function used to work but now it does not. Tag: lost Office 2003 when I backed up in Vista OS Tag: 113774
Multi laguage add-in technical problem
I installed the Multi Language Pack from Microsoft (2007 edition) on Windows
XP professional and Office 2007, and I have the following technical
difficulties:
1) when spellchecking or typing in a language that has diacritics or
hyphens, such as Romanian, instead of the correct symbol or letter I get a
little square inserted within the word. This problem persists in all the
fonts except Cambria, where everything works fine.
2) HOWEVER, if I print that document using the Cambria font, which seems to
display the diacritics correctly, it'll print pages of gibberish digits. To
print it correctly, I need to select all and choose another font such as
Times New Roman. That will do it.
Any suggestions? Tag: lost Office 2003 when I backed up in Vista OS Tag: 113773
Trouble converting to PDF from MS Word
1. One of the images that looks good on MS-Word direct print out, gets messed
up (background greyed) when converted to PDF.
2. I have a symbol for centerline in my MS-Word by typing 2104 in a document
and press Alt+X. It looks good when directly printed to a printer, but shows
up as question mark when converted to PDF.
3. Is there a way I can see my pdf file, in a way as if I am reading the
book.,, with the first page starting from right. I know I had this feature in
Acrobat 5.0 and not in the newer versions.
4. Would appreciate if any of you can direct me to a good acrobat tech form
which is free. I couldnt located a free one in Adobe's website.
Thanks, for your always great support. Tag: lost Office 2003 when I backed up in Vista OS Tag: 113772
right mouse pop-up menu erro
There are two pop-up menus on right mouse in word. One does formatting and
the other is available only if the word is misspelled (has wavy red
underline). Problem: I must click twice on misspelled words to get the list
of possible corrections. Is this normal? Is anyone else seeing this?
Type the following "Thisi a bad". Note the red wavy underline, and right
mouse click the word "Thisi". I see the cut/paste pop-up menu. Then right
click again, now I see a list of words to try to replace. Tag: lost Office 2003 when I backed up in Vista OS Tag: 113771
Disabled Macros for Printing
I know that this has been posted before, but I have tried all of the
solutions that were previously presented and nothing has worked.
I am getting the error, "The macros in this project are disabled." I have
already changed the macro security to low and I also set it to trust all
add-ins and templates. I still get the error when I go to File > Print.
I just started getting this when I upgraded to Vista. I am still running
Word 2003.
Any ideas? I am trying to run the macro for a program called deskPDF that
creates PDF files from .doc files. Tag: lost Office 2003 when I backed up in Vista OS Tag: 113770
Typing issue
I am running Running Word 2007 on Windows XP on new PC with lots (2 GB) of RAM.
User cannot type fast without letters being skipped. Tried new keyboard. I
watched user press harder but this install of Word 2007 simply will not
tolerate moderate typing speeds. Roughly every 7th to 10th letter skipped.
Visible response of screen display of each letter to keyboard touch has a
slight hitch in it.
The same typing speed DOES NOT cause problems in WordPad or Notepad. Same
user has no problem in Word 2003 for years.
Office Diagnostics found no problem.
There is a Spellex medical spell checker. Other than that, this setup is
plain vanilla with largely default settings. What else can I adjust to solve
this problem? Tag: lost Office 2003 when I backed up in Vista OS Tag: 113769
Word, Outlook and Lotus Notes
Hi I use both Outlook 2007 and Lotus Notes, Lotus Notes is my default mail
client.
When I start Word 2007 I get a message "Either there is no default mail
client or the current mail client cannot fulfill the messaging request.
Please run Microsoft Office Outlook and set it as the default mail client."
Word is then closing or hangs.
This was not a problem when I used Office 2003.
Thanks Tag: lost Office 2003 when I backed up in Vista OS Tag: 113768
people favourite websites
Dear Friend,
I have found some websites:
for msn messenger,
http://www.hotmailpk.com/
For
entertainment,spotlight.articles,interviews,dailyupdate;Wrestling;gosips;amazing
pictuers;cookingrecipes;lifestyle;
htttp://www.familyandtwist.com/
for sms messeges, smsjokes,
http://www.smstwist.com/
for beauty tips
http://www.familypk.com
Visit these websites:
For Myspace.Com users visit:
http://www.myspacepk.com/
To learn a language visit:
http://www.codedcode.com/
To download world's best wallpapers for your computer visit:
http://picture-g Tag: lost Office 2003 when I backed up in Vista OS Tag: 113767
How to solve memory deficiency for office assistant
I get an error message when I try to select a different office assistant in
"office 2003" "there is not enough memory available to complete this
opperation". Tag: lost Office 2003 when I backed up in Vista OS Tag: 113766
Used back up in Vista. Now my MS Office programs won't run until Windows
installs them. They do open, eventually.