I am using Word 2000.
I think I am doing something wrong, but can not figure out what is wrong.
I need to type a lot of temperatures such as 32 degrees (32 "subscript" and
a little o".) When it prints out, the little "o" appears to be in the middle
of the line the charcter (32) is on, instead of up above the character. I
hope this makes sense, since I can not type here exactally what I am trying
to demonstrate.

Does anyone know what I am doing wrong? Please help me as soon as you can,
I have around 100 of these types of characters to do.

Re: degree symbol by Herb

Herb
Fri Aug 26 12:34:26 CDT 2005

I'm a bit confused... Are you using a little o, or are you using the degree
symbol? And, why are you subscripting the numbers? E.g., if you type the
number(s) followed by the actual degree symbol, positioning shouldn't be a
problem: 32° (it might not survive my posting here depending on the
encoding you use to read messages).

You can insert the degree symbol by holding down the Alt key, and typing
0176 on the number pad (the NumLock key needs to be on). After typing it
once, you could create an AutoText or an AutoCorrect item to automatically
insert it for you. Or, you can use Insert - Symbols to assign it to an
easy-to-remember keystroke.

--
Herb Tyson MS MVP
Please respond in the newsgroups so everyone can follow along.
http://www.herbtyson.com
"Aurora" <Aurora@discussions.microsoft.com> wrote in message
news:4C0D45A6-A03B-4360-A457-B19BFD393C36@microsoft.com...
>I am using Word 2000.
> I think I am doing something wrong, but can not figure out what is wrong.
> I need to type a lot of temperatures such as 32 degrees (32 "subscript"
> and
> a little o".) When it prints out, the little "o" appears to be in the
> middle
> of the line the charcter (32) is on, instead of up above the character. I
> hope this makes sense, since I can not type here exactally what I am
> trying
> to demonstrate.
>
> Does anyone know what I am doing wrong? Please help me as soon as you
> can,
> I have around 100 of these types of characters to do.
>



Re: degree symbol by Suzanne

Suzanne
Fri Aug 26 13:59:34 CDT 2005

There is also a built-in keyboard shortcut in Word: Ctrl+Shift+@, Spacebar
(that is, press Ctrl, Shift, and the 2 key simultaneously), release, then
press the Spacebar.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Herb Tyson [MVP]" <herb@1x2y3z.xnw> wrote in message
news:%23jEPpRmqFHA.3304@TK2MSFTNGP11.phx.gbl...
> I'm a bit confused... Are you using a little o, or are you using the
degree
> symbol? And, why are you subscripting the numbers? E.g., if you type the
> number(s) followed by the actual degree symbol, positioning shouldn't be a
> problem: 32° (it might not survive my posting here depending on the
> encoding you use to read messages).
>
> You can insert the degree symbol by holding down the Alt key, and typing
> 0176 on the number pad (the NumLock key needs to be on). After typing it
> once, you could create an AutoText or an AutoCorrect item to automatically
> insert it for you. Or, you can use Insert - Symbols to assign it to an
> easy-to-remember keystroke.
>
> --
> Herb Tyson MS MVP
> Please respond in the newsgroups so everyone can follow along.
> http://www.herbtyson.com
> "Aurora" <Aurora@discussions.microsoft.com> wrote in message
> news:4C0D45A6-A03B-4360-A457-B19BFD393C36@microsoft.com...
> >I am using Word 2000.
> > I think I am doing something wrong, but can not figure out what is
wrong.
> > I need to type a lot of temperatures such as 32 degrees (32 "subscript"
> > and
> > a little o".) When it prints out, the little "o" appears to be in the
> > middle
> > of the line the charcter (32) is on, instead of up above the character.
I
> > hope this makes sense, since I can not type here exactally what I am
> > trying
> > to demonstrate.
> >
> > Does anyone know what I am doing wrong? Please help me as soon as you
> > can,
> > I have around 100 of these types of characters to do.
> >
>
>


Re: degree symbol by Rima

Rima
Fri Aug 26 15:21:16 CDT 2005

You want ° but you're getting o?

Do a find/replace to change all of those faster.

Aurora wrote:
>I am using Word 2000.
>I think I am doing something wrong, but can not figure out what is wrong.
>I need to type a lot of temperatures such as 32 degrees (32 "subscript" and
>a little o".) When it prints out, the little "o" appears to be in the middle
>of the line the charcter (32) is on, instead of up above the character. I
>hope this makes sense, since I can not type here exactally what I am trying
>to demonstrate.
>
>Does anyone know what I am doing wrong? Please help me as soon as you can,
>I have around 100 of these types of characters to do.


--
Message posted via OfficeKB.com
http://www.officekb.com/Uwe/Forums.aspx/word-application-errors/200508/1

Re: degree symbol by Herb

Herb
Fri Aug 26 22:34:39 CDT 2005

Hence, my suggestion to assign it to something easy-to-remember. :-)

--
Herb Tyson MS MVP
Please respond in the newsgroups so everyone can follow along.
http://www.herbtyson.com
"Suzanne S. Barnhill" <sbarnhill@mvps.org> wrote in message
news:ekziIFnqFHA.3672@TK2MSFTNGP11.phx.gbl...
> There is also a built-in keyboard shortcut in Word: Ctrl+Shift+@, Spacebar
> (that is, press Ctrl, Shift, and the 2 key simultaneously), release, then
> press the Spacebar.
>
> --
> Suzanne S. Barnhill
> Microsoft MVP (Word)
> Words into Type
> Fairhope, Alabama USA
> Word MVP FAQ site: http://word.mvps.org
> Email cannot be acknowledged; please post all follow-ups to the newsgroup
> so
> all may benefit.
>
> "Herb Tyson [MVP]" <herb@1x2y3z.xnw> wrote in message
> news:%23jEPpRmqFHA.3304@TK2MSFTNGP11.phx.gbl...
>> I'm a bit confused... Are you using a little o, or are you using the
> degree
>> symbol? And, why are you subscripting the numbers? E.g., if you type the
>> number(s) followed by the actual degree symbol, positioning shouldn't be
>> a
>> problem: 32° (it might not survive my posting here depending on the
>> encoding you use to read messages).
>>
>> You can insert the degree symbol by holding down the Alt key, and typing
>> 0176 on the number pad (the NumLock key needs to be on). After typing it
>> once, you could create an AutoText or an AutoCorrect item to
>> automatically
>> insert it for you. Or, you can use Insert - Symbols to assign it to an
>> easy-to-remember keystroke.



Re: degree symbol by Suzanne

Suzanne
Fri Aug 26 22:58:27 CDT 2005

That isn't so much hard to remember as hard to type. But if you don't use it
very often, it's easier not to rock the boat.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Herb Tyson [MVP]" <herb@1x2y3z.xnw> wrote in message
news:elQmChrqFHA.2592@TK2MSFTNGP09.phx.gbl...
> Hence, my suggestion to assign it to something easy-to-remember. :-)
>
> --
> Herb Tyson MS MVP
> Please respond in the newsgroups so everyone can follow along.
> http://www.herbtyson.com
> "Suzanne S. Barnhill" <sbarnhill@mvps.org> wrote in message
> news:ekziIFnqFHA.3672@TK2MSFTNGP11.phx.gbl...
> > There is also a built-in keyboard shortcut in Word: Ctrl+Shift+@,
Spacebar
> > (that is, press Ctrl, Shift, and the 2 key simultaneously), release,
then
> > press the Spacebar.
> >
> > --
> > Suzanne S. Barnhill
> > Microsoft MVP (Word)
> > Words into Type
> > Fairhope, Alabama USA
> > Word MVP FAQ site: http://word.mvps.org
> > Email cannot be acknowledged; please post all follow-ups to the
newsgroup
> > so
> > all may benefit.
> >
> > "Herb Tyson [MVP]" <herb@1x2y3z.xnw> wrote in message
> > news:%23jEPpRmqFHA.3304@TK2MSFTNGP11.phx.gbl...
> >> I'm a bit confused... Are you using a little o, or are you using the
> > degree
> >> symbol? And, why are you subscripting the numbers? E.g., if you type
the
> >> number(s) followed by the actual degree symbol, positioning shouldn't
be
> >> a
> >> problem: 32° (it might not survive my posting here depending on the
> >> encoding you use to read messages).
> >>
> >> You can insert the degree symbol by holding down the Alt key, and
typing
> >> 0176 on the number pad (the NumLock key needs to be on). After typing
it
> >> once, you could create an AutoText or an AutoCorrect item to
> >> automatically
> >> insert it for you. Or, you can use Insert - Symbols to assign it to an
> >> easy-to-remember keystroke.
>
>


Re: degree symbol by Herb

Herb
Sat Aug 27 11:28:05 CDT 2005

The built-in assignment was impossible for me to remember, since I didn't
see any logic to it. I see no relationship between @ and ° (much easier for
me to remember 0176, for that matter). However, more memorable than either
of those, for me, is Ctrl+Alt+Shift+o, which is what I use... and, weather
fiend that I am, I use it many times during the day. I keep Alt+0176 tucked
away in my brain for when I'm not in Word (e.g., right now).

--
Herb Tyson MS MVP
Please respond in the newsgroups so everyone can follow along.
http://www.herbtyson.com
"Suzanne S. Barnhill" <sbarnhill@mvps.org> wrote in message
news:OSvkdurqFHA.3424@TK2MSFTNGP14.phx.gbl...
> That isn't so much hard to remember as hard to type. But if you don't use
> it
> very often, it's easier not to rock the boat.
>
> --
> Suzanne S. Barnhill
> Microsoft MVP (Word)
> Words into Type
> Fairhope, Alabama USA
> Word MVP FAQ site: http://word.mvps.org
> Email cannot be acknowledged; please post all follow-ups to the newsgroup
> so
> all may benefit.
>
> "Herb Tyson [MVP]" <herb@1x2y3z.xnw> wrote in message
> news:elQmChrqFHA.2592@TK2MSFTNGP09.phx.gbl...
>> Hence, my suggestion to assign it to something easy-to-remember. :-)
>>
>> --
>> Herb Tyson MS MVP
>> Please respond in the newsgroups so everyone can follow along.
>> http://www.herbtyson.com
>> "Suzanne S. Barnhill" <sbarnhill@mvps.org> wrote in message
>> news:ekziIFnqFHA.3672@TK2MSFTNGP11.phx.gbl...
>> > There is also a built-in keyboard shortcut in Word: Ctrl+Shift+@,
> Spacebar
>> > (that is, press Ctrl, Shift, and the 2 key simultaneously), release,
> then
>> > press the Spacebar.
>> >
>> > --
>> > Suzanne S. Barnhill
>> > Microsoft MVP (Word)
>> > Words into Type
>> > Fairhope, Alabama USA
>> > Word MVP FAQ site: http://word.mvps.org
>> > Email cannot be acknowledged; please post all follow-ups to the
> newsgroup
>> > so
>> > all may benefit.
>> >
>> > "Herb Tyson [MVP]" <herb@1x2y3z.xnw> wrote in message
>> > news:%23jEPpRmqFHA.3304@TK2MSFTNGP11.phx.gbl...
>> >> I'm a bit confused... Are you using a little o, or are you using the
>> > degree
>> >> symbol? And, why are you subscripting the numbers? E.g., if you type
> the
>> >> number(s) followed by the actual degree symbol, positioning shouldn't
> be
>> >> a
>> >> problem: 32° (it might not survive my posting here depending on the
>> >> encoding you use to read messages).
>> >>
>> >> You can insert the degree symbol by holding down the Alt key, and
> typing
>> >> 0176 on the number pad (the NumLock key needs to be on). After typing
> it
>> >> once, you could create an AutoText or an AutoCorrect item to
>> >> automatically
>> >> insert it for you. Or, you can use Insert - Symbols to assign it to an
>> >> easy-to-remember keystroke.
>>
>>
>



Re: degree symbol by Suzanne

Suzanne
Sat Aug 27 17:34:03 CDT 2005

I don't bother to remember any of the Alt+0xxx combinations because I don't
have ready access to the numeric keypad. But I have charts where I can
easily look them up (a character is often easier to spot in a printed chart
than in Insert | Symbol).

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Herb Tyson [MVP]" <herb@1x2y3z.xnw> wrote in message
news:OhBuORyqFHA.332@tk2msftngp13.phx.gbl...
> The built-in assignment was impossible for me to remember, since I didn't
> see any logic to it. I see no relationship between @ and ° (much easier
for
> me to remember 0176, for that matter). However, more memorable than either
> of those, for me, is Ctrl+Alt+Shift+o, which is what I use... and, weather
> fiend that I am, I use it many times during the day. I keep Alt+0176
tucked
> away in my brain for when I'm not in Word (e.g., right now).
>
> --
> Herb Tyson MS MVP
> Please respond in the newsgroups so everyone can follow along.
> http://www.herbtyson.com
> "Suzanne S. Barnhill" <sbarnhill@mvps.org> wrote in message
> news:OSvkdurqFHA.3424@TK2MSFTNGP14.phx.gbl...
> > That isn't so much hard to remember as hard to type. But if you don't
use
> > it
> > very often, it's easier not to rock the boat.
> >
> > --
> > Suzanne S. Barnhill
> > Microsoft MVP (Word)
> > Words into Type
> > Fairhope, Alabama USA
> > Word MVP FAQ site: http://word.mvps.org
> > Email cannot be acknowledged; please post all follow-ups to the
newsgroup
> > so
> > all may benefit.
> >
> > "Herb Tyson [MVP]" <herb@1x2y3z.xnw> wrote in message
> > news:elQmChrqFHA.2592@TK2MSFTNGP09.phx.gbl...
> >> Hence, my suggestion to assign it to something easy-to-remember. :-)
> >>
> >> --
> >> Herb Tyson MS MVP
> >> Please respond in the newsgroups so everyone can follow along.
> >> http://www.herbtyson.com
> >> "Suzanne S. Barnhill" <sbarnhill@mvps.org> wrote in message
> >> news:ekziIFnqFHA.3672@TK2MSFTNGP11.phx.gbl...
> >> > There is also a built-in keyboard shortcut in Word: Ctrl+Shift+@,
> > Spacebar
> >> > (that is, press Ctrl, Shift, and the 2 key simultaneously), release,
> > then
> >> > press the Spacebar.
> >> >
> >> > --
> >> > Suzanne S. Barnhill
> >> > Microsoft MVP (Word)
> >> > Words into Type
> >> > Fairhope, Alabama USA
> >> > Word MVP FAQ site: http://word.mvps.org
> >> > Email cannot be acknowledged; please post all follow-ups to the
> > newsgroup
> >> > so
> >> > all may benefit.
> >> >
> >> > "Herb Tyson [MVP]" <herb@1x2y3z.xnw> wrote in message
> >> > news:%23jEPpRmqFHA.3304@TK2MSFTNGP11.phx.gbl...
> >> >> I'm a bit confused... Are you using a little o, or are you using the
> >> > degree
> >> >> symbol? And, why are you subscripting the numbers? E.g., if you type
> > the
> >> >> number(s) followed by the actual degree symbol, positioning
shouldn't
> > be
> >> >> a
> >> >> problem: 32° (it might not survive my posting here depending on the
> >> >> encoding you use to read messages).
> >> >>
> >> >> You can insert the degree symbol by holding down the Alt key, and
> > typing
> >> >> 0176 on the number pad (the NumLock key needs to be on). After
typing
> > it
> >> >> once, you could create an AutoText or an AutoCorrect item to
> >> >> automatically
> >> >> insert it for you. Or, you can use Insert - Symbols to assign it to
an
> >> >> easy-to-remember keystroke.
> >>
> >>
> >
>
>