When closing app get error "word cannot complete save"

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - MI5 Persecution: cost of the operation -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= -= MI5: cost of the operation -= -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Here's what a couple of other people on Usenet (uk.misc) had to say regarding the cost of running such an operation... PO: >Have some sense, grow up and smell reality. What you are talking about PO: >would take loads of planning, tens of thousands of pounds and lots of PO: >people involved in the planning, execution and maintenance of it. You PO: >must have a very high opinion of yourself to think you are worth it. PM: >But why? And why you? Do you realize how much it would cost to keep PM: >one person under continuous surveillance for five years? Think about PM: >all the man/hours. Say they _just_ allocated a two man team and a PM: >supervisor. OK., Supervisor's salary, say, #30,000 a year. Two men, PM: >#20,000 a year each. But they'd need to work in shifts -- so it would PM: >be six men at #20,000 (which with on-costs would work out at more like PM: >#30,000 to the employer.) PM: > PM: >So, we're talking #30,000 x 6. #180,000. plus say, #40,000 for the PM: >supervisor. #220,000. Then you've got the hardware involved. And PM: >any transcription that needs doing. You don't think the 'Big Boss' PM: >would listen to hours and hours of tapes, do you. PM: > PM: >So, all in all, you couldn't actually do the job for much less than PM: >a quarter million a year. Over five years. What are you doing that makes PM: >it worth the while of the state to spend over one and a quarter million PM: >on you? Those are pretty much the sort of calculations that went through my head once I stopped to consider what it must be costing them to run this operation. The partial answer is, there have been periods when the intensity has been greater, and times when little has happened. In fact, for much of 1993 and the first half of 1994, very little happened. Although I don't think that was for reasons of money - if they can tap into the taxpayer they're not going to be short of resources, are they? The more complete answer is in the enormity of what they're doing. Relative to the cost to British pride of seeing their country humiliated for the persecution of their own citizens, isn't is worth the cost of four or five people to try to bring things to a close in the manner they would wish? To the government a million or two is quite honestly nothing - if they can convince themselves of the necessity of what they're doing, resources will not be the limiting factor. 55 -- Posted via a free Usenet account from http://www.teranews.com Tag: When closing app get error "word cannot complete save" Tag: 109549
  - 2
    - aaaaaahhhhhhhhhhhh helpmyspacebarisnotworkingwhatdoidowhatwhatwhaaaaaaaaaaaaat! Tag: When closing app get error "word cannot complete save" Tag: 109545
  - 3
    - Word freezes, then crashes Hello, Iâ??ve been using a version of Word contained in Office 2000 Professional for about 4 years now without any problems (except the â??usualâ?? formatting headaches, for which Iâ??ve found help here). I first used it on Win 98, and Iâ??m now using XP Home SP2. Recently, Word started acting strangely indeed. As I type, the program suddenly freezes, without any warning. Then, hitting any key appears to make Word scroll very quickly through the document, until it suddenly freezes up again. The program then appears to take up most of the CPU usage, and the computerâ??s fan turns up to high speed. Itâ??s impossible to do anything in the document and, within a few seconds, or perhaps longer (it seems to depend), the program just crashes without any warning, and all open word documents close. I de-installed Office, as well as its the corresponding registry keys, and after shutting down the computer, etc., I re-installed Office. I thought this would make the difference... but it didnâ??t. My Word documents still exhibit the same behaviour. And itâ??s become very annoying indeed. After de-installing and re-installing Office I was a little surprised to see that, when opening Word after the re-installation, my old customised toolbars were showing instead of the default ones (nothing fancy, just reduced down to the icons one uses most often). I didnâ??t quite understand why this was, but might it be a clue as to why Word is still acting in the same way? Iâ??ve checked out some comments and some help pages linked to through the discussions here (â??Corrupt documentsâ?? and â??What to do when word crashes, etc.), but I canâ??t seem to find anything similar. Any help or suggestions would be appreciated. Thanks in advance, Steve (P.S.: Iâ??m not connected to a default printer). Tag: When closing app get error "word cannot complete save" Tag: 109541
  - 4
    - HOW CAN I FIX THE NTLDR? DOES ANYONE KNOWS HOW CAN I FIX THE NTLDR? Tag: When closing app get error "word cannot complete save" Tag: 109536
  - 5
    - Invisible Font list in Word 2003 We have Office 2003 with five licenses. Four of the installations work fine. The fifth one, which is also on the newest computer, has problems. This computer runs XP Home and is a VisionsBook Pro 3000 laptop with an Acer hard drive. In Word, when we use the font styles in the formatting bar many of them are invisible. It is as if many of them have been typed in white. The space is there for them and if I click on the empty space the font name appears in the window and is usable. But until I actually click on it to use it I have no clue as to which font I am choosing. I have 17 blank spots between Arial (not the Arial family - the rest are all invisible) and Bookshelp Symbol 7. The fonts are installed. They are visible in Publisher but not in Word (nor in Power Point as I just discovered). They are visible in WordPad and in WordPerfect. I have tried changing the default printer to no avail. I have uninstalled an reinstalled Office 2003 two or three times to fix thsi problem. We would like to see the font names so we can choose whether or not to use them before we click on them. Thanks, Mary Tag: When closing app get error "word cannot complete save" Tag: 109524
  - 6
    - Error Printing Documents with equations Hey ! I am using the oldest beta (beta tester :) and there is a bug. I did a paper for the university using some equations. When i print the paper, some dont come out, even that i see them on the screen. I need to save it as a *.doc file, and it saves the equations as pics, but the quality is awfull. Known bug ? Please consider this as a report, i know that the beta is over. if there is a quick fix or it is fixed in official 2007 version please let me know. Thanks. Tag: When closing app get error "word cannot complete save" Tag: 109523
  - 7
    - what is a marquee program that will enable scrolling text messages -- geald Tag: When closing app get error "word cannot complete save" Tag: 109521
  - 8
    - Word 2007: Error on insert cover page (cannot open this document template) When I click on Insert | Cover Page, I immediately get an error message: Word cannot open this document template. (C"\..\1033\Building Blocks.dotx) I thought it might be related to having some of the beta's on this workstation, so I removed all of the office products and reinstalled fresh and it still happens. Any suggestions? This is with Office 2007 Enterprise Edition. Thanks, Richard Tag: When closing app get error "word cannot complete save" Tag: 109507
  - 9
    - Word 2007 won't quit Hello, On Windows XP SP2 Word 2007 will not quit without using the task manager. Any suggestions for a remedy? Thanx! Tag: When closing app get error "word cannot complete save" Tag: 109503
  - 10
    - Having problems with Word scroll bar positions - Vertical and Horizontal Anyone know which registry setting or config file holds the scrollbar position? It doesn't seem to be happening on all document templates we use. Others do not have the same issue (with misalignment of start position) when using the same templates. The cursor is fine - it's just the scrollbars. Tag: When closing app get error "word cannot complete save" Tag: 109499
  - 11
    - Update causes 100% CPU Utilization I recently updated Word 2003 to the latest version and now clicking the mouse when it's open or opening it for email purposes results in Word taking up 100% of resources for at least 10 seconds. Sometimes Word won't recover and it crashes and will send you through a loop of recovery and reopening that never ends. I uninstalled and reinstalled Word 2003. It worked fine prior to service pack 2 updates. Afterwards (and I think there is a SP3) the problem started and has rendered Word the ultimate time waster. I've only noticed a document on old versions doing this with the answer being to update. Has anyone seen this? Tag: When closing app get error "word cannot complete save" Tag: 109493
  - 12
    - Used System Restore: Word 2003 gives Error: 25090 now I did a System Restore. Adobe Photoshop CS needed to be connected by phone to Adobe to reaffirm it's key. Adobe CS suite now works. However, now Publiser and Word and EXCEL don't want to work. They take minutes and minutes to come up with a screen, and then minutes to load a document. Got a "Error 25090" when trying Words HELP-->DETECT & REPAIR function. Did not work. Something with XP System Restore and the Adobe programs losing the fact that they were registerd (almost 2 years now) programs and having to be re-registered over the Internet with Adobe and this happening at the same time means the problem must be connected with the register program on-line function and doing a system restore. Tag: When closing app get error "word cannot complete save" Tag: 109484
  - 13
    - Word freezes when attempting to open a document that is protected for forms with no password. I have a user that is unable to open word documents that a few months ago they could. These are very vanilla docs with radio buttons... nothing fancy. They are saved and protected selecting Forms on the protection options, with no password. When they are unprotected by another user, this user can then open them up. But when they try to open one that is protected (again, no password) word becomes unresponsive. The only option is then to CTL/ALT/DEL and to end task. The interesting thing is that other users can open these with on problems. In fact I can logon to this PC as the Administrator and they open using the same Word install perfectly fine. I have confirmed this user has local Admin rights. In fact the files she is pulling from the Novell server are setup in her personal folder which only she has rights too (in addition to admin). We have tried to save them to new names and have the user open the new copies and still have the same result. We have attempted a Office 2000 repair and a reinstall with no changes. Help! Matt Tag: When closing app get error "word cannot complete save" Tag: 109483
  - 14
    - word2007 wont print single label correctly hi, I was trying to print a single label in word 07. Regardless of where i specified the label to print (column 2 row 3) word printed it in column one, row one. Any one else notice this? Any ideas to correct? Thanks, Richard Stricker Tag: When closing app get error "word cannot complete save" Tag: 109478
  - 15
    - SCROLLING TOOLBAR IS NOT INSTALLED;PLEASE INSTALL -- geald Tag: When closing app get error "word cannot complete save" Tag: 109471
  - 16
    - Email Word attachment won't convert from Encoded Text My wife's laptop computer has Word 2002. She receives email attachments frequently from an office where she does some work. The .doc attachments they send her don't open. Instead she gets a pop-up Convert File From: Encoded Text which shows the File Conversion is Windows Default. When she converts the attachment she gets gobledy-gook followed by rows of *y*s. We've tried options other than Encoded Text with no success. What next? Will appreciate any help anyone can give us! Tag: When closing app get error "word cannot complete save" Tag: 109470
  - 17
    - Automatic formatting? I'm editing an enormous document, and everything has been going fine until this evening. Nothing has been changed, but the autocorrect is suddenly not working! My straight quotes remain straight and my em dashes remain two hyphens. I checked to see that it was all still selected in the options, and it is. Why did it stop correcting? How can I make it start again, when all the correct options are already selected? Tag: When closing app get error "word cannot complete save" Tag: 109461
  - 18
    - TOC normal view differs from print view Word 2000 SP3 100 page new document with lots of graphics, using custom template. Insert auto TOC Normal view shows proper TOC organization. Print view mixes up header3 subtopics under the wrong header1 chapter, only for the first two chapters. Html view shows mysterious tabbed positions of the problem header3 TOC entries. All remaining TOC entrties are normal. Also, if I delete TOC and build another TOC, it always wants to replace my TOF (table of figures) even when the insertion cursor is no where near the TOF. Any guidance would be appreciated. Thanks Tag: When closing app get error "word cannot complete save" Tag: 109460
  - 19
    - Hidden Files and copies with squiggles I hid "my document" folder without a password. When I went back in to unhide "my documents" folder there were 4 files that looked like this; ~$tober 12 (1mb of file October 12) ~WRL0002.tmp (exact copy of file October 12 but renamed) ~$Oct 20 (Oct 20 -1mb) ~$ec 1-2 (Dec 1-2 -1mb) 3 files were only 1mb. I'm just wondering why these are here? I had not accessed these files recently and it seems strange they were the only ones in a folder with about 20 other documents that this happened too. And I have about 20 other folders in the my document folder. Could they have been opened although I had them hidden and that is why the extra files? I have never had this problem before although it is the first time I have hid files. Any incite would be appreciated. Tag: When closing app get error "word cannot complete save" Tag: 109459
  - 20
    - How to level up columns? Dear expert, I'm an editor of a learned journal. Often I have to spend lot of time in leveling up the base line of two columns at the ends of every page and every section. What I did was to modify the spacing by adjusting the number of line before and after a paragraph, or other similar approaches. The thing is that the manipulation was hard to control and it automatically "jumps". Could any know better way to do so? Is there any function in the Word? BTW, I use MS Office 2000. Thanks a lot! Roger Tag: When closing app get error "word cannot complete save" Tag: 109453
  - 21
    - Re: lost Mircrosoft Word My computer was unplugged while I was backing up. I had to start ove and set up my computer again (Microsoft Windows XP Prof) after that m documents wouldn't open, and I got error message: 25090 office sourc engine - microsoft Officer edition 2003. then another saying look fo office source engine and try uninstalling it. Fatal error durin installation. I then went into remove programs and removed it becaus it keep giving me this error message everytime I would touch something It got rid of the messages, but now I can't find my Microsoft Word t reinstall it -- zbeth ----------------------------------------------------------------------- zbeth7's Profile: http://www.officehelp.in/member.php?userid=555 View this thread: http://www.officehelp.in/showthread.php?t=128873 Posted from - http://www.officehelp.i Tag: When closing app get error "word cannot complete save" Tag: 109448
  - 22
    - Landscape function will not work - error message: "Increasing righ The work-around for this "unknown" problem is combersome and time-consuming. Simply find a "Normal.dot" file on another computer, copy it, and restore it to the problem computer. Instant fix. Tag: When closing app get error "word cannot complete save" Tag: 109445
  - 23
    - Problems opening a doc created in 2002 with 2003 I'm trying to complete a government from that was created in Word 2002 but when I open it with my 2003 version, all data I input comes up in the "tracking changes" format and won't allow me to check boxes. All text comes up in red and underlined. Tag: When closing app get error "word cannot complete save" Tag: 109439
  - 24
    - Crash on Table Edit I spent much of the last two weeks at work working on a document in which I made use of tables to achieve various fomatting - a line with left justified and right justified text - several lines with columns of vertically alligned text - that sort of thing. All went well - for a while. But, then as we got close to the deadline for finishing with this document I encountered a problem. Whenever I tried to edit the structure of one of these tables or delete one, Word would crash. "Word has encountered a problem and neeeds to close . . . ." When I restarted with the repaired document, there were no repairs to see, but there was a message that that the file had incluced a "date integrity error." I was using Word 2003 on a computer with Windows XP SP2. One additional clue: The file had been processed by the "Remove Hidden Information" tool from Microsoft. Does anybody have any ideas about: i) What caused this, or ii) How to fix it? John Tag: When closing app get error "word cannot complete save" Tag: 109438
  - 25
    - Word 2003 File Saving Error When I am using Microsoft Word 2003 and saving my document periodically, after 15-20 minutes the name in the blue bar changes to it's temp name (~$filename), and it won't let me save it. Furthermore, the original file disappears and is replaced by the temp name in Windows Explorer. When I try to open the file in recent documents it can't be found, and when I click on the temp file it can't be openend. The only way around it is to copy the text, open a new document and paste it in, delete the temp file, and re-save it. It won't let me save the file as ANY name after it changes to its temp name. Is there some way to fix this, or do I need to repair/re-install Office? Thanks for the help guys! Tag: When closing app get error "word cannot complete save" Tag: 109436
- Next
  - 1
    - Problems with Left-to-Right language Good day; - My new OS is XP prof service pack 2 (updated) - I am running Microsft office 2000 premium on my computer backed with Microsoft office 2000 proofing tools fully installed . - My keyboard is a QWERTY carrying both alphabetsâ?? letters, Latin and Arabic, and both numbers Latin and Arabic. - In international settings under languages Ã details Ã settings, in addition to English and other languages, I have added the language Arabic (Saudi Arabia) with the following keyboards layout options: Arabic (101) and Arabic (102). In Microsoft Word, whether using keyboard layouts Arabic (101) or Arabic (102), I encounter the following two problems: 1. While all buttons relative to Arabic letters function normally, when I push the buttons relative to the Arabic numbers nothing shows up!!! I even tried to push all the buttons on my keyboard to see whether other buttons correspond to the Arabic letters, no luck? I tried again changing the Arabic language to (Egypt) it did not work. What should I do? 2. While all commands present on the formatting toolbar function properly including Bold letters, Font, alignment, ectâ?¦, font size does not. In fact, when changing font size using the command on the formatting toolbar the command will always show the preset size it does not change; however; if afterwards I check font size in: Standard Toolbar Ã Format Ã Font, the font size indicates the one I have newly set!!! The major problem however, is that the font size on the document itself does not change?! N.B.: This problem is not present while working with English Language! What should I do? P.S.: previously I had windows 98 Arabic Edition as OS on my computer and I did not had such problems! Thanks in advance Carlo Tag: When closing app get error "word cannot complete save" Tag: 109435
  - 2
    - Printing a gradient background How can I get Word2003 to print a single full-page-stretched 2-colour gradient background, rather than tiling the small image many times across the page? The gradient background is displayed correctly in print preview, but then prints wrongly. We've tried many different pages, PCs and printers - all do the same so we presume the 'fault' is within Word. Tag: When closing app get error "word cannot complete save" Tag: 109432
  - 3
    - word problem with paste word hangs after working ok. using office 2003 since it was released and now all of a sudden it hangs up when trying to paste from an email. i have cleaned up the computer, ran virus checker, spy checker, defrag and office updates. it worked for a day and then hung up again, can anyone help? thanks Tag: When closing app get error "word cannot complete save" Tag: 109427
  - 4
    - MSWord locks up when I paste in from web I often receive e-mails and like to save them to Word. Sometimes Word locks up when I attempt to paste. Tag: When closing app get error "word cannot complete save" Tag: 109402
  - 5
    - Conversion from HTML to RTF does not work properly. When I converted a 5.5 MB dictionary (all in Latin charecters, using Times and Symbol fonts) to RFT for publishing, the following happened: (1) all the end-of entry markers CHR(183) (Greek full stop) disappeared. (2) combinations of accented letters (é, è etc.) with the following (or preceding) letter were changed into Chinese characters. Please, how can I prevent these changes to happen? TIA, kind regards, Rob van Albada, Amsterdam. Tag: When closing app get error "word cannot complete save" Tag: 109397
  - 6
    - Word & Excel opening problem I resently re-installed Microsoft Office on my XP. When I open Word and Excel it opens a window which says "Preparing to Install". This happens everytime! It won't go directly into the program if I select a particular document and indicates that a window is open and can't open the document until the window closes. I am presuming that it is the "Preparing to Install" window is the one delaying it. It really slows the process down. This doesn't happen with Power Point or other programs; just Word and Excel. Is one of my settings wrong? And how do I correct this issue? -- Rick Wolfe Malaspina Coach Lines Tag: When closing app get error "word cannot complete save" Tag: 109393
  - 7
    - Track Changes is off, but a formatting change is highighted... Hi All, I am editing a document in Word 2002 (10.5522.4219) SP-2. in preparation for delivering some Word formatting training. It had track changes enabled when I received it. I have turned off Track Changes and Accepted All Comments. However, when I then apply a Heading style, a change is tracked. I cannot work out why, or how to turn it off. Grrrrr!! Any help most appreciated. Alastair Tag: When closing app get error "word cannot complete save" Tag: 109389
  - 8
    - Word settings won't hold I recently upgraded to Microsoft Office 2003 (student-teacher edition), hoping in part to get rid of a persistent problem in which my preference settings are constantly replaced by a consistent set of settings that I never chose. I carefully uninstalled the old version before installing the new one, but the problem persists. Nothing seems to prevent this, not even going through the register (at great peril, I know) and deleting all the references to Microsoft Office I could find. Creating a new normal.dot template didn't help, either. I can't figure what triggers this reversion to the unwanted settings. It doesn't happen immediately, or upon any event I can identify, but it never takes long. It either happens in the same computer session or the next time I turn on the computer and open Word. Other Office programs, Excel at least, don't seem to have this problem. Any suggestions? Thanks. John Craig NOSPAMjcraig007@highstream.net__________________________ Remove NOSPAM from address to reply. Tag: When closing app get error "word cannot complete save" Tag: 109382
  - 9
    - file open very slow With frequency (but not 100% of the time) when I do a File>Open, it takes more than a minute for the dialog box to come up. Windows Explorer and other programs show a list of all the files in this directory quickly (although there are a lot of files: 2.2 GB in the folder and its subfolders. the subfolders maybe have half this). Is this a known problem with Word? Is there something I've got wrong? Can I fix this? Thanks for any help, Huck Tag: When closing app get error "word cannot complete save" Tag: 109374
  - 10
    - Cannot print to a network printer Hi all. I have a network printer that work fine whith programs as notepad or works or the printer test page. But when I try to print from Ms Word 2003 I receive an error: winword.exe... application hang..... Someone can help me? I have Xp sp2 and office 2003 sp2. Tag: When closing app get error "word cannot complete save" Tag: 109365
  - 11
    - file open menu very slow to open With frequency (but not 100% of the time) when I do a File>Open, it takes more than a minute for the dialog box to come up. Windows Explorer and other programs show a list of all the files in this directory quickly (although there are a lot of files: 2.2 GB in the folder and its subfolders. the subfolders maybe have half this). Is this a known problem with Word? Is there something I've got wrong? Can I fix this? Thanks for any help, Huck Tag: When closing app get error "word cannot complete save" Tag: 109360
  - 12
    - macro runs but does not work as expected Hi, I created a macro by recording search and replace actions (replacing text as well as styles). The actions worked fine when recording the macro. The macro runs without error - but also without any effect. Thanks in advance for your support and best regards! Ulrike == Here is one of the actions of the macro: -- Selection.Find.ClearFormatting Selection.Find.Style = ActiveDocument.Styles("Heading 1") Selection.Find.ParagraphFormat.Borders.Shadow = False Selection.Find.Replacement.ClearFormatting Selection.Find.Replacement.Style = ActiveDocument.Styles("Ã?berschrift 1") Selection.Find.Replacement.ParagraphFormat.Borders.Shadow = False With Selection.Find .Text = "(" .Replacement.Text = "(" .Forward = True .Wrap = wdFindContinue .Format = True .MatchCase = False .MatchWholeWord = False .MatchWildcards = False .MatchSoundsLike = False .MatchAllWordForms = False End With Selection.Find.Execute Replace:=wdReplaceAll -- And here is the whole macro (but as far as I can see, in principle the find-replace action is just repeated with other parameters): Sub Signum_Manuskript_Formatvorlagen() ' ' Signum_Manuskript_Formatvorlagen Makro ' Makro aufgezeichnet am 10.12.2006 von Ulrike SchÃ¤fer ' Selection.Find.ClearFormatting Selection.Find.Style = ActiveDocument.Styles("Heading 1") Selection.Find.ParagraphFormat.Borders.Shadow = False Selection.Find.Replacement.ClearFormatting Selection.Find.Replacement.Style = ActiveDocument.Styles("Ã?berschrift 1") Selection.Find.Replacement.ParagraphFormat.Borders.Shadow = False With Selection.Find .Text = "(" .Replacement.Text = "(" .Forward = True .Wrap = wdFindContinue .Format = True .MatchCase = False .MatchWholeWord = False .MatchWildcards = False .MatchSoundsLike = False .MatchAllWordForms = False End With Selection.Find.Execute Replace:=wdReplaceAll Selection.Find.ClearFormatting Selection.Find.Style = ActiveDocument.Styles("Heading 1") Selection.Find.ParagraphFormat.Borders.Shadow = False Selection.Find.Replacement.ClearFormatting Selection.Find.Replacement.Style = ActiveDocument.Styles("Ã?berschrift 1") Selection.Find.Replacement.ParagraphFormat.Borders.Shadow = False With Selection.Find .Text = "[" .Replacement.Text = "[" .Forward = True .Wrap = wdFindContinue .Format = True .MatchCase = False .MatchWholeWord = False .MatchWildcards = False .MatchSoundsLike = False .MatchAllWordForms = False End With Selection.Find.Execute Replace:=wdReplaceAll Selection.Find.ClearFormatting Selection.Find.Style = ActiveDocument.Styles("Heading 1") Selection.Find.ParagraphFormat.Borders.Shadow = False Selection.Find.Replacement.ClearFormatting With Selection.Find .Text = "^p" .Replacement.Text = "" .Forward = True .Wrap = wdFindContinue .Format = True .MatchCase = False .MatchWholeWord = False .MatchWildcards = False .MatchSoundsLike = False .MatchAllWordForms = False End With Selection.Find.Execute Replace:=wdReplaceAll Selection.Find.ClearFormatting Selection.Find.Style = ActiveDocument.Styles("Heading 2") Selection.Find.ParagraphFormat.Borders.Shadow = False Selection.Find.Replacement.ClearFormatting Selection.Find.Replacement.Style = ActiveDocument.Styles("Ã?berschrift 2") Selection.Find.Replacement.ParagraphFormat.Borders.Shadow = False With Selection.Find .Text = "[" .Replacement.Text = "[" .Forward = True .Wrap = wdFindContinue .Format = True .MatchCase = False .MatchWholeWord = False .MatchWildcards = False .MatchSoundsLike = False .MatchAllWordForms = False End With Selection.Find.Execute Replace:=wdReplaceAll Selection.Find.ClearFormatting Selection.Find.Style = ActiveDocument.Styles("Heading 2") Selection.Find.ParagraphFormat.Borders.Shadow = False Selection.Find.Replacement.ClearFormatting With Selection.Find .Text = "^p" .Replacement.Text = "" .Forward = True .Wrap = wdFindContinue .Format = True .MatchCase = False .MatchWholeWord = False .MatchWildcards = False .MatchSoundsLike = False .MatchAllWordForms = False End With End Sub Tag: When closing app get error "word cannot complete save" Tag: 109340
  - 13
    - Word Processor will not open up in works 8 If this is not the place to post this question please forgive and tell me where i can post it. I have Works 8 on my computer and all of a sudden i can not open the word processor program even though the other programs open up with no problem. It acts as if the program is "hung-up" i get no error messages it just does not open. I have been trying to fix this all day and i give up. anyone know how to fix this problem???? Tag: When closing app get error "word cannot complete save" Tag: 109335
  - 14
    - Word Spellcheck finds old footer I just ran a spell/grammar check on a document in Word 2003 and it found an error in a footer--but that footer has been replaced. I can't find it in the document in Print view or when I print it out. Why is this happening, and can I make it go away? Tag: When closing app get error "word cannot complete save" Tag: 109325
  - 15
    - Security warning when MS Word is opened When I open Word, a security warning pops up saying that the doc I'm opening contains macros that may contain viruses, etc. Since I'm only trying to open a new doc, or any of dozens that don't contain macros, why is this happening, and how do I get rid of this? Tag: When closing app get error "word cannot complete save" Tag: 109321
  - 16
    - File permission error and Windows Live OneCare I keep getting "word is unable to complete save due to file permission error" since installing Live OneCare. Disable the Firewall and the problem goes away. (Saving to my hard drive, btw)Obviously, I don't want to adhere to this workaround. Also, if I launch Word 2003 in Safe mode via the Ctrl-key, the problem seems to disappear as well. What's the likely problem? The solution? Thanks. WindowsXP|SP2 Tag: When closing app get error "word cannot complete save" Tag: 109318
  - 17
    - Word 2007 / Displayed Math Text Direction Printing Bug I'm not sure if this is the right forum for this sort of questions, but..= =2E I noticed this simple issue, which appears to be a bug to me, as I=20 reproduced it on several computers =E2=80=8Eand installations of Word 200= 7=E2=80=8E. I=20 wonder if anybody else experiences that too? Is it a known bug? Or=20 else, any idea what's going wrong to me? Attached is a short Word 2007 document (.docx) demonstrating the=20 following problem: When entering displayed equations (using Word 2007=E2=80=99s built in mat= h=20 entry, I.E. Alt+=3D) alone in a line =E2=80=8E=E2=80=8E(not surrounded by= any text),=20 equations in paragraphs with right-to-left directionality (switched=20 using =E2=80=8ECtrl+Shift) simply do not appear in the printed or PDF/XPS= =20 exported output. Inline equations =E2=80=8E=E2=80=8E(surrounded by text) = do not produce=20 that problem.=E2=80=8E The simple workaround is to change the directionality of all display=20 equation paragraphs to left-to-=E2=80=8Eright. Since there is no text aro= und=20 display equations, that will only have any other side effects in =E2=80=8E= terms=20 of paragraph spacing.=E2=80=8E Any ideas? -- Tom --=20 Tom Alsberg - certified insane, complete illiterate. Homepage: http://www.cs.huji.ac.il/~alsbergt/ * An idea is not responsible for the people who believe in it. Tag: When closing app get error "word cannot complete save" Tag: 109316
  - 18
    - MS Word crashes when typing "Quando me l'hanno" in italian Hi I have discovered that Word crashes when: - the language is Italian - I type the sentence "Quando me l'hanno" I use MS Office XP in italian with the last updates, this happens both on Win 2000 and Win XP (both updated). Is there anybody that could explain why this happens? Perhaps the spelling/grammar checker fails? The sentence is a correct italian sentence, though incomplete. If I change the language to english the error does not happen. If I apply the Italian language the error appears again. Ciao A Tag: When closing app get error "word cannot complete save" Tag: 109313
  - 19
    - Beta 2007 user When I try to open documents in word 2007 I get the following error message. "This document is unavailable" Wheter it is 2003 format or new document using word 2007. What is up? Tag: When closing app get error "word cannot complete save" Tag: 109310
  - 20
    - You do not have a World Wide Web start page registered on your computer. Using Word 2002, I get the above message when I click Start Page on the Web toolbar. Searching for the message, I find an Excel list of error messages noting that this is msg. # 2816. That's it. How do I register a WWW start page on my computer? Don't tell me to do it in IE7's Internet Options | General tab. The reason I'm messing with this in Word is that IE7 won't let me change my Start Page (Home Page). KB has been no help in this. Tag: When closing app get error "word cannot complete save" Tag: 109306
  - 21
    - microsoft word icon disappearing out of start> programs> MS office> ???? where would it go... could it be a virus??? the program itself is still there under the office11 folder, but pinning this shortcut to the desktop of over 2000 users is very time consuming HELP!! Tag: When closing app get error "word cannot complete save" Tag: 109299
  - 22
    - Word 2007 When i put graphs into MS Word 2007, the graphs appear on the page, bu when i try to print them, the graphs do no appear. The text around the come out, but just a blank spot where the graph should be. Any ideas -- E Machin ----------------------------------------------------------------------- E Machine's Profile: http://www.officehelp.in/member.php?userid=543 View this thread: http://www.officehelp.in/showthread.php?t=128015 Posted from - http://www.officehelp.i Tag: When closing app get error "word cannot complete save" Tag: 109291
  - 23
    - Protect Form Button not available I am trying to design and form but after inserting a macro, the Protect Form Button is greyed out and I can no longer use the form. Any help would be appreciated. Tag: When closing app get error "word cannot complete save" Tag: 109285
  - 24
    - Illegal operation in winword.exe A user has had a problem 2 times in this area. She opens a document (it's always a mail merge doc) and she gets the error illegal operation in winword.exe at 0167:301...... I've copied the file to other PC's and the same problem occurs. I've searched the MS KB but didn't find much help. Is there any way to recover the contents of the file? I've looked in the file recovery folder but there's no file. Thanks, Diane Tag: When closing app get error "word cannot complete save" Tag: 109278
  - 25
    - Track Changes & Word Crashing We have a file from another company where they have added track changes. When we open the Word file, within 3 seconds it crashes, recovers itself and then crashes again, and again. It would seem that the track changes are the problem. I've looked at the forum and it's obviously corrupt and there was a helpful link to how to mend a corrupt file - Save As Webpage (which I did) and then Save back to Word (which I don't seem to be able to do - it's not on the File type list). however, even the saved as webpage version doesn't show the tracked changes so probably not any point. All the other options (check section breaks) I can't do as the file crashes so quickly - before you do anything! We've tried from a CD version of the file (in case the mail systems were corrupting it) and this has the same problem. Any clues anyone? Thanks in advance. Tag: When closing app get error "word cannot complete save" Tag: 109275

Something has happened to Word. When I close out of the application I
receive an error that says "Word cannot complete save." Also occurs when
closing out of Outlook (which uses word as the email editor). Searched the
forum and web, but cannot find a solution.

Word/Office 2003
Win. XP Pro (all updates and SP2)
Windows Live OneCare

- Tried a "repair" install of office - no change
- Deleted the Word template file (C:\Documents and Settings\Troy
Chollar\Application Data\Microsoft\Templates) - no change
BUT the templates folder had a ton of .tmp files.

Any suggestions/advice would be greatly appreciated.

- Troy @ TLC

Top

Re: When closing app get error "word cannot complete save" by Terry

Terry
Wed Dec 27 02:35:22 CST 2006

With all applications closed, go to the templates folder and delete all the
temp files. Then go to C:\Documents and Settings\Troy Chollar\Local\Temp and
delete all the temp files abandoned there too. Then try the following FAQ
which includes problems closing (despite its name). See
http://word.mvps.org/FAQs/AppErrors/ProbsOpeningWord.htm

--
Terry Farrell - MS Word MVP

"Troy @ TLC" <troy at tlccreative dot com> wrote in message
news:epEnbiWKHHA.3424@TK2MSFTNGP02.phx.gbl...
> Something has happened to Word. When I close out of the application I
> receive an error that says "Word cannot complete save." Also occurs when
> closing out of Outlook (which uses word as the email editor). Searched the
> forum and web, but cannot find a solution.
>
> Word/Office 2003
> Win. XP Pro (all updates and SP2)
> Windows Live OneCare
>
> - Tried a "repair" install of office - no change
> - Deleted the Word template file (C:\Documents and Settings\Troy
> Chollar\Application Data\Microsoft\Templates) - no change
> BUT the templates folder had a ton of .tmp files.
>
> Any suggestions/advice would be greatly appreciated.
>
> - Troy @ TLC
>

Top