Word 2007 Spellcheck not working
I have just started using Word 2007 (was using office 2000) and my spellcheck
is only catching the grammatical mistakes but not the spelling errors.
I.E. only green curlys and no red ones.
I have already ensured that:
"Do not check spelling and grammar automatically"
"Detact language automatically"
"Hide spelling errors in this document only"
"Hide grammar error in this document only"
are ALL UNchecked.
"Check spelling as you type"
"Mark grammar errors as you type"
"Check grammar with spelling"
are all CHECKed
Please advice!! Tag: SKU1E3,CAB Tag: 115406
Can't Make Line Shape Longer
I am using the drawing feature of Word 2007. I draw a horizontal line by
holding down the Shift key while drawing.
Later, if I want to make the line longer, I select it, hold down the Shift
key and drag one of the ends of the line. This is supposed to let me make the
line longer without changing the orientation of the line. What it does
instead is make the length of the line extend clear off the end of the
document, to what seems like infinity. At that point there is no way to make
the line shorter again since I can no longer see its end.
Is there a fix or a work-around for this problem? Tag: SKU1E3,CAB Tag: 115403
comments initials change when printing
hello everyone, i have been having this little problem and it's driving me
nuts.
word 2003
when i add a comment on my document my initials show up. and as i add on
more comments, the comments with my initials get numbered.
now the problem is when i print them. my initials disappear and they get
replaced by other letter(s). sometime just a letter. the comments remain
and the numberings.
so in summary, my initials in my comments get replaced by letter(s) when i
print the document.
any help would be appreciated.
thanks in advance.
R. Tag: SKU1E3,CAB Tag: 115400
remove addins from Word 2007
I have Word 2007 and some addin called Zeon is stopping Word from opening
properly. I don't know what this addin is but can someone please tell me how
to remove it?
Thanks--
Millie Tag: SKU1E3,CAB Tag: 115391
"Invalid Source Specified" Word 2007
I have WORD 2007 OFFICE. When I use the INSERT CITATION button, and I enter
a new source first, the citation that appears in the document then always
says INVALID SOURCE SPECIFIED.
And, when I try to insert the WORKS CITED in the document, by using the
BIBLIOGRAPHY button, this appears in the document, "THERE ARE NO SOURCES IN
THIS DOCUMENT"-- but the 3 sources are shown in the bibliography.
please HELP!! Tag: SKU1E3,CAB Tag: 115390
Cant add page border
Word drives me to distraction. I,m using an A4 page, the set up knows its an
A4 page but when I try
to add a border to an entire page it only does it on both sides. I,m almost
at stage where I get a ruler out and do it,
be a darn sight quicker. Any ideas?
Many thanks
John Tag: SKU1E3,CAB Tag: 115387
blank document has symbol
I've reviewed and tried the fixes in "blank document not blank" but they
don't work. I recently installed Word 2002 onto my new laptop. Its operating
system is Vista. I have the same program on my office computer & it works
fine but from the first, when I open Word the blank document has a border
(for lack of a better word) in each corner. It looks like part of a square...
top left corner has right and bottom of square, top left has left and bottom,
etc. I can't click on them or access them in any way. Maybe its because I'm
trying to use this program in Vista. Any help would be appreciated. Tag: SKU1E3,CAB Tag: 115385
Insert Symbol causes loop
In Word 2002, the Insert Symbol function frequently enters a loop, where the
window updates continuously, and no commands are recognized. Pressing escape
repeatedly and clicking on the top bar manages to shut the window and return
to Word, but the function is rendered useless.
This typically occurs when a symbol from a particular font has been used,
and another font is chosen from inside the Insert Symbol dialogue, which does
not utilize that particular slot. First inserting a Wingdings symbol and
later trying to choose a Unicode font is a good example of what would trigger
this.
I have experienced the problem on several different computers. Tag: SKU1E3,CAB Tag: 115381
New Blank Document
When I start up Microsoft Word an old document always comes up. How do I get
rid of it for good so that it will be a new blank document each time I go
into Microsoft Word? Tag: SKU1E3,CAB Tag: 115369
THIS DOCUMENT COULD NOT BE REGISTERED ERROR IN WORD
when opening a new empty document or any existing document in WORD (2003)
I now always receive the error message :
"This document could not be registered. It will not be possible to create
links from other documents to this document"
Other than this annoying message, there does not appear to be any other
effect.
This message only recently started appearing.
I don't know what the message means, I could find no reference in the Office
help site to this message, nor any reference to "registering a document"
anywhere in the Word help.
I have tried running regsvr32 for old32.dll - no effect on the problem.
we also tried completely uninstalling MS Office 2003 and reinstalling it -
also no help.
Another recent problem of much more significance is that I now am unable to
use
MS Access at all, whenever I attempt to open an existing database or just
open the bare program I always get the error message
"A problem occurred while MS Office Access was communicating with the OLE
server or ActiveX control"
It is impossible to regain control of Access, whenever we close the message
box, it just reopens again, and we cannot do anything at all in Access
including closing down the program. We have to kill it in Task manager. Tag: SKU1E3,CAB Tag: 115368
downloading to word
I would really appreciate it if someone could tell me what to do as far as
trying to download to word...whenever something needs to be downloaded to
word, a screen pops up and says what language can you read the file in????
In addition; while typing it constantly moves the typing space around and
frequently causes me to go back and fix the spelling of words...I would
really appreciate any help. Tag: SKU1E3,CAB Tag: 115366
Page Number and Table of Contents
When I try to set up Page X of Y, I get this: "{PAGE \* mergeformat } | Page"
and when I try inserting the Table of Contents I get this: "{TOC \o "1-3 \h
\z\u}" what am I doing wrong or what setting is turned on or off?
My email is rmitchell@charter.net Tag: SKU1E3,CAB Tag: 115363
Formatting entire document, not selected text
I am trying to format individual words in Word (italisize, bold, unerline,
etc) and individual bullet points. But whatever I do to one word in the text,
the program does it to all words in the text. So trying to boldface one word
boldfaces all words in the entire doc. Any suggestions? Tag: SKU1E3,CAB Tag: 115357
after deleting a footnote Word does not renumber the notes
I have used Microsoft Word's automatic numbering system to write footnotes in
an article I am writing. But when I tried to delete two footnotes Microsoft
Word did not renumber the footnote. I need help to correct this error. Tag: SKU1E3,CAB Tag: 115354
Footnote Creates an Additional Footer
Weird Word 2003 problem in one document. When I insert a footnote, I get an
additional complete footer above the footnote, which is itself above the
standard document footer. This additional footer is from a previous
document. I can't select the additional footer in either doc editing mode or
header/footer editing mode. Text flows gracefully around the additional
footer, but I can't find a way to delete this. Have tried export to XML and
back, no change.
Do I have a corrupt template? Tag: SKU1E3,CAB Tag: 115353
APA sytle format
The APA style format does not allow for correct citations when a document is
retrieved from an internet source. For example, this is the correct way this
should be referenced:
Jedd, M. (2005, October). Merits of Planning. PM Network , pp. 58-63.
Retrieved October 30, 2007, from Business Source Premier database.
however, MSWord 2007 does this:
Jedd, M. (2005, October). Merits of Planning. PM Network , pp. 58-63.
Are their plans to correct this? Tag: SKU1E3,CAB Tag: 115352
Word 2003 fatal error
Suddenly my Word program has started to encounter a fatal error. After a few
seconds the "Microsoft Word has encountered a problem and needs to close."
message appears and I have to close the program. I have uninstalled and
reinstalled the program to no avail. Uninstalled and reinstalled Office to
no avail.
Any help greatly appreciated. Tag: SKU1E3,CAB Tag: 115351
Word 2007 won't save a .docx file, saves ONLY to 2003's .doc
I created a fiule on word 2007 from blank, iit saved..later, i edited it and
when i tried to save it Word would just crash. I tried several times, even
copied pasted the entire text to a new blank doc, and had no luck.
However, the file does saves as a word 2003 .doc file from the same word
2007...I have no idea what the problem can be. I could send the trouble file
to anyone if he need to investigate further...
judas Tag: SKU1E3,CAB Tag: 115350
Run-time error
I am receiving Run-time error '5825' object has been deleted.
I started receiving this after opening visual basic and looking around. I
didn't think that I deleted or changed anything... Tag: SKU1E3,CAB Tag: 115348
"Read-Only" file insanity
I'm writing along in Word '07, saving with no problems, then suddenly my file
becomes "Read-Only" without my permission. When I go outside of Word, or
inside of Word, the file's properties has Read-Only NOT checked. Word just
seems to be tossing it in. Then I have to save it to another file, then
resave it to its proper name.
This is SO very annoying. Is there a fix? Tag: SKU1E3,CAB Tag: 115346
my paragraphs condense to less than an inch when I print.
Just starting today, I typed up a document and sent it to print and as soon
as it printed, the paragraphs condensed all their text to less than half an
inch (all the letters sit on top of each other). The only way I can see the
text is if I look in Reading Layout, but when I print or when I look at
regular layout I can't read the text. Please help!! Tag: SKU1E3,CAB Tag: 115345
Time/date on comments keeps getting reset
I am working in Word 2003 with a document containing comments from many times
and dates. Within the past day or so, I've seen that when I roll over the
comments, they give a time/date within the past few minutes, as though I've
just entered them all. Fortunately, the correct author has been preserved in
each case, but I'd really like the correct date/time there as well. Any
suggestions?
Thanks! Tag: SKU1E3,CAB Tag: 115343
How do I get Word to Recognize EndNote X?
One month ago, I was able to use Cite While Your Write between EndNote X and
Word 2003. Now, I cannot get Word to recognize that EndNote exists. I have
not consciously changed anything, although I did import a Word file from a
Mac. I have Windows XP. Thanks for the help. nancy Tag: SKU1E3,CAB Tag: 115342
Can't print symbols
We have 2 users, both on Word 2000; when one user prints a document to the
departmental printer, some symbols appear as blocks - when a second user
prints the same document to the same printer, the symbols appear as they
should. Any answers??? Tag: SKU1E3,CAB Tag: 115334
Word 2003 spelling in Swedish language does not work
My installation is Word 2003 in Swedish. When I create documents in English
the spelling and grammer works fine, but in Swedish I get the error message:
"Microsoft Office Word cannot check the spelling or grammer in this
document. This function is not installed. Do You want to install it now?" (I
have translated the message to English).
When I press YES I get the error message:
"Microsoft Office Word cannot check spelling or grammer in this document.
The function is not available"
When I press OK I get next error message:
"Microsoft Office Word cannot check spelling or grammer in this document. An
error occured and the function does not longer work correctly. Do You want to
repair it now?"
When I press YES I get #2 of the messages above. After a few iterations
spelling the error messages does no longer appear, and spelling is obviously
disabled in the present document.
In my former installation (Office 2000) I had about the same problem.
Please help!
//Johan Tag: SKU1E3,CAB Tag: 115327
word2003/vista emails unreadable
had xp with word2003 got new computer with vista loaded word2003 now when we
open emails (wich always opened just fine with xp)it now opens in some wierd
lingo like y with dots above it and other strange computer lingo, Tag: SKU1E3,CAB Tag: 115325
Speech recognition error
I can use dictation without problem in the spreadsheet and database
applications in Works 8.0 and Internet Explorer. However I am unable to
dictate into a document within Word 2002; it works OK in the help dialogue
box however. When trying to use it within a document, the Dictation tab
activates Voice Command, unless I open up Help and then it works fine. Voice
Command tab works normally in all applications I mentioned. Already
re-installed Word. Tag: SKU1E3,CAB Tag: 115323
problems with microsoft works and word files
Whenever I try to open Microsoft Office word processor files in Microsoft
works word processor 8.5 it says it cannot be opened and that the file is
corrupted which is incorrect I would like to know is there anyway to correct
this very urgent. Tag: SKU1E3,CAB Tag: 115321
Word 2007 Annoying Problem
Whenever I close Word 2007, even a blank document, I get the "M/S Word has
encountered a problem and needs to close" error. It then automatically
restarts and can keep going like that endlessly until or unless the
'automatic restart' box is unticked. It's driving me nuts.
This problem has developed recently for no reason I can determine. Office
diagnostics does locate any problem with my installation, which was the
'subscription' version.
Any suggestions please. Tag: SKU1E3,CAB Tag: 115317
Document Information Panel error
When I try to access the Document Information Panel I get an error message;
"The Document Information Panel was unable to load."
Is there a setting that needs to be checked/un-check?
I tried a repair office with no luck.
Any and all assistance with this is appreciated. Tag: SKU1E3,CAB Tag: 115314
Track Changes
I have a user that is trying to record his track changes but the auther
color is the same as the previous auther. How can this be if MS Word is set
to Auther? According to what i have read it should auto pick atleast eight
different colors on its own.
I have loaded the same document onto my computer and i receive a different
color for each auther. So, it seems the issue is isolated to the users
computer. However, I have no idea what this setting could be because i have
set the users comptuer to the same settings as mine. Any ideas???
Thanks in advance!! Tag: SKU1E3,CAB Tag: 115311
Ordered and Unordered Lists
We have an internal application done in Visual Studio 2003, VB.Net, which
generates Word documents. I have a document that has an ordered list where
the list items are full length paragraphs (not a simple list like "Pancake
Ingredients: 1. Egg, 2. Milk, 3. Mix, etc.). I went to generate this
document, and when I open it up in Word 2003, everything shows fine. When I
open the document in 2007 (we have the converter pack for Word 2003 to Word
2007 and vice versa), the list is gone. All the contents are there, but the
numbering is gone.
Is this a known bug in Word 2007, and if so, is there a workaround for it,
or do we need to re-write the document in Word 2007 format (i.e. .docx or
.docm)?
Thanks in advance. Tag: SKU1E3,CAB Tag: 115309
Save as command
I am using MS word 2003 under windows vista operating system.
I get an error message (MS office word is not responding) whenever I try to
save a document in a different folder (other than a default folder) using
"save as" command. I did unstill the MS office 2003 and installed again, but
the problem still exits.
I tried using the "save as" command in other office 2003 programs (excel, po
wer point, front page), same problem occurs.
Appreciate the help. Tag: SKU1E3,CAB Tag: 115307
Wrong font when document opens
I have document that was partly in English and partly in Hebrew. I have
opened and closed it in the past with no problems. Now when I open it the
Hebrew portion is in Greek (I think), but the Format/Fonts dialog box
indicates that the font remains Hebrew. Can I fix this without retyping the
Hebrew? Tag: SKU1E3,CAB Tag: 115306
Tools menu will not expand
I can't get my tools menu to expand. I've tried both suggestions I've found
here, resetting (deleting) the registry entry, and the winword.exe /a (which
works for only for that instance of opening Word, but not when opening
subsequent documents or instances of the program. The only add in I have is
Endnote, but the problem persists whether or not it and it's macros are
enabled. Tag: SKU1E3,CAB Tag: 115303
"Wait for the printer" message
Hi all
I am using Office 2003, did run Office update ActiveX and everything is fine
on my PC.
Now when I open a Word document I got the message "The printer has not yet
responded, but the Microsoft Office program may be able to proceed without
printer information. Do you want to continue to wait for the printer?".
If I say "yes" the question comes back after a while.
If I say "No" I got Word hanging in a kind of Blank Window Mode.
Do not know what to do and haven't found yet any relevant information.
--
Thanks for your help Tag: SKU1E3,CAB Tag: 115301
All characters move to left margin
Why? Every now and then all the characters in one of my word documents moves
to the left margin. If I change the font from New Times Roman to Arial, the
characters return to their correct position. But, I use New Times Roman as
my default font. Where do I begin to figure this out?
Arthur Tag: SKU1E3,CAB Tag: 115295
Word Cannot obtain the data from the excel.sheet.8 link.
I am trying to insert a link from an excel file into a word document using
paste special, then clicking the paste link option and then selecting
unformatted text. When I do this, it get Word Cannot obtain the data from the
excel.sheet.8 link.
This happens with any option when paste link is selected. When paste is
selected it inserts the data.
This normally works. We move the files around, and use a macro to change the
path when the file is opened: SetLinkedImagesLocalPath(). The existing links
work fine. Just can not insert new ones. If I do it the old fashioned way in
type out the {LINK } field, it works fine also. My users will not go for
having to type the link field out.
Anybody know why this is not working?
--
KT Tag: SKU1E3,CAB Tag: 115292
Inking broken in 2007
Machine: Gateway TA6 tablet. OS: XP-Pro tablet.
Problem: When a Word 2003 (.doc) file is opened then marked in ink
(Review-Start Inking), and then saved as a Word 2007 document, all the ink is
shifted far from the original location.
Fix: Do mark-ups as you please, then before saving, click once on â??select
objectsâ?? (inking ribbon), and then save. The ink will remain in the proper
place. This fixes the document for all subsequent opening of the file and
inkings so that you need not do the â??select objectsâ?? again; just proceed
normally.
Attitude Fix: *sigh*, I've nothing for that. It's a pain here because we
have about 7,000 of these machines in use. Tag: SKU1E3,CAB Tag: 115290
Word doc. now won't open properly in word but opens fine in WordPa
I actually have a bunch of the same type of document...all created in Word
2003 that for some reason, when I open them with Word, they only show the one
graphic that was in the layout...all the text and other layout is gone. Then
if I 'open with' WordPad or other word processors, everything is there...so I
don't 'think' the file is corrupt.
I have other similar type documents that work just fine in Word....anybody
have an idea??
Thanx!
Jay Tag: SKU1E3,CAB Tag: 115289
winword.exe causes problem for disk on key
When I try to disconnect the usb disc on key I get a warning that I
can't disconnect now. If I open the task manager and manually close
the winword.exe, I can safely disconnect.
Is it only me?
If not, what causes that?
Why does winword.exe works even after closing all word windows?
How can I prevent this?
Thanx! Tag: SKU1E3,CAB Tag: 115284
Can't Save or Create Documents in Word 2003
Hi, everyone.
I am running Word 2003 on a 64-bit Vista Ultimate system, and it
just became unusable. :-(
After installing several programs, I tried to run Word and was
informed that there was a problem with an add-on, and I was asked
if I wanted to disable it. I said yes. It then asked if I wanted
to reload the document template; I again said yes.
Now I find that New, Save, Save As, Save as Web Page, Options,
and numerous other menu items are grayed out.
A Web search found a suggestion that the Normal template had been
corrupted and that it might help to delete it. Unfortunately,
that didn't help.
Any ideas?
Thanks.
--
Keith Tag: SKU1E3,CAB Tag: 115280
Word 2007 Index feature with Vista is not working for concordance
Word 2007 with Vista is not accessing a Concordance Table to create an Index
in a large document. Any suggestions? It worked fine in Word 2007 with XP!
I followed Microsoft instructions online
Thanks, JG Tag: SKU1E3,CAB Tag: 115275
My selection is locked
I am unable to open a new document, type anything, etc. Everytime I try, I
get a message the my selection is locked and must be changed. How do I do
that? Tag: SKU1E3,CAB Tag: 115273
Can't open WORD 2000
Can't open WORD - just keeps trying to open. When I reboot, this message
appears: RUNDLL Error loading C:\WINDOWS\system32\livjaqpa.dll The
specified module could not be found.
I tried "Repair" for Office 2000, reinstalling the CD, that did not work. Tag: SKU1E3,CAB Tag: 115261
Word/Excel mail merge displays truncated value in "Go to Record" f
The "ones" position of the value displayed in the "Go to Record" field is
truncated in Word 2003 SP3. For example, if I enter "99" into Word's "Go to
Record" field, Word correctly displays a document merged with the data from
record 99 of my Excel address database. If I enter "123"
(one-hundred-twenty-three) into Word's "Go to Record" field, Word again
correctly displays a document merged with the data, this time from record
"123" of my Excel address database. However, "12" is displayed in Word's "Go
to Record" field. The "3" has been truncated from the correct valued of
"123." How can I report this bug to Microsoft?
-
Peter Sale
USA Tag: SKU1E3,CAB Tag: 115256
Mail merge with link to Excel truncates value displayed in next re
Ever since I installed SP3 onto my Office 2003 my Word based mail merge jobs
truncate the value displayed within Word's "Go To Record" field after 99. For
example, if I enter 122 in this field, and press enter, Word correctly pulls
the merge data for the 122nd record from the appropriate Excel spreedsheet,
and Word correctly displays the merged Document, but the value displayed in
Word's "Go to Record" field is only 12 rather than 122. How can I "report"
this Office SP3 bug to Microsoft?
-
Peter Sale
USA Tag: SKU1E3,CAB Tag: 115255
Word 2007 refusing to close
Word 2007, Vista Ultimate, ThinkPad T61
-------------------------------------------
This event will occur repeatedly with Word, then cease for a few days, then
begin again. I haven't found the connecting elements as yet.
1. I have been working on a Word document, saved it, and clicked on "exit"
to close Word.
2. Word closes down and a message appears saying an error has occured
forcing Word to close.
3. Usually a message appears saying that a certain (long name) .tmp file
can't be found.
4. Word then restarts.
I don't want it to restart and I have no idea what temp file it's looking
for.
Any thoughts?
Dave Tag: SKU1E3,CAB Tag: 115254
When starting Word this often appears ;cant find missing file SKU1E3,CAB.
eventually Word appears but what is this file
"Chil" <Chil@discussions.microsoft.com> wrote in message
news:F2810DA8-0520-408B-A30C-85F3D055D400@microsoft.com...
> When starting Word this often appears ;cant find missing file SKU1E3,CAB.
> eventually Word appears but what is this file