Lost all my macros

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - run time error Word recently froze up while using it, and now when I open it, I receive the following: Run-time error'-2147024809 (80070057)':Can't move focus to the control base because it is invisible, not enabled, or of a type that does not acept the focus. I can click on End and open Word, but there is no toolbar at the top and no file, edit, view, help and no ability to print anything. Does anyone have any ideas or have you seen this before? Thanks. Tag: Lost all my macros Tag: 75896
  - 2
    - Word 97 problem My wife's computer running Win 98SE and Word 97 has developed a problem following a less than competent shut-down. On booting up a box entitled 'I/O Monitor Initialise Error' containing the message 'Missing virus pattern file' appears. Word loads OK, but some files will not open; the 'illegal operation' message appears; and the program shuts down. In one or two cases the program refuses to open the file on the grounds that it has no proper 'doc' suffix - which it has. All these files open OK in Wordpad and Notepad, or in the Word 2000 program on my machine. I have re-installed Word 97 and installed an AVG virus checker, but to no avail. Can anyone help? -- Roy Bailey West Berkshire. Tag: Lost all my macros Tag: 75895
  - 3
    - Macros not enabled in Word xp After installing Office Xp Word on Windows 98 computer Word opens with warning that macros are not enabled. I cannot print or save documents as I get same warning. Microsoft Knowlege Base Article 290949 suggest changing security level if problem occurs in Word 2002 but it doesn't work for me in Word XP. Tag: Lost all my macros Tag: 75894
  - 4
    - Word 2000 This is a multi-part message in MIME format. ------=_NextPart_000_00C4_01C3E32B.9D980370 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Currently having a problem in Word 2000 installed freshly on a new HP = computer. Working with a table, when I try to cut a large section, = approximately 4 rows and 5 columns, the computer freezes with the hour = glass. This happens sporadically. If I select the same area and drag & = drop it works just fine. What could be causing this? --=20 Tony ------=_NextPart_000_00C4_01C3E32B.9D980370 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Diso-8859-1"> <META content=3D"MSHTML 6.00.2800.1276" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=3D#ffffff> <DIV><FONT face=3DArial size=3D2>Currently having a problem in Word 2000 = installed=20 freshly on a new HP computer.  Working with a table, when I try to = cut a=20 large section, approximately 4 rows and 5 columns, the computer freezes = with the=20 hour glass.  This happens sporadically.  If I select the same = area and=20 drag & drop it works just fine.  What could be causing=20 this?</FONT></DIV> <DIV> </DIV> <DIV><FONT face=3DArial size=3D2><BR>-- = <BR>Tony</FONT></DIV></BODY></HTML> ------=_NextPart_000_00C4_01C3E32B.9D980370-- Tag: Lost all my macros Tag: 75893
  - 5
    - Can't see inserted picture When I attempt to Insert a picture into a Word document I see nothing except handles and thin black border. In the past the photo was inserted into the Word document. When I right click inside the area where the picture should be, a drop down box appears that allows me to open a picture object. When I do this I see the picture. When I click on close picture I return to the original document and all I see is what I saw before. When I am in "open picture object" screen and right click on the picture and select copy, I can go to my original Word document and paste the photo there. Tag: Lost all my macros Tag: 75884
  - 6
    - re: low memory resources What does the error mesage "low memeory resources" mean when I am working in Microsoft Word 2000, and attempting to print or move text somewhere else. Thanks, Al Olsen Tag: Lost all my macros Tag: 75881
  - 7
    - Cannot open word files I get the message that the file is unavailable when I try to open a word document. I cannot open Excel workbooks either. This happened after I installed Office XP SP2. Tag: Lost all my macros Tag: 75880
  - 8
    - heading style defaults I read somewhere that if I tried to delete an in-built heading style, I couldn't and that Word would simply reset it to the heading's default. --- I can't figure out how to 'try to delete' a heading style Going back to the heading's default would suit me perfectly. When editing a paper for someone from Korea, I introduced heading styles so that I could make a Table of Contents, and saved the modified heading styles to the template. Later I realized that the heading styles I was working on (from a Korean computer, typing in English) were based on Normal style which included Korean - so that the heading styles on my computer now include Korean (although they are based on MY Normal style which uses US English as the default). It works, but I would like to remove the Korean language residue. I have tried looking into the language part of modify, but I can't see that there is anything there to work with to delete something - only to add a language (I can see that I need to learn advanced templates - but right now, I just want to get things back to where they were.) Tag: Lost all my macros Tag: 75879
  - 9
    - Macros-enable or disable Every time I turn on Word 2002 there is a message to enable or disable a Macro-I have tried to follow the instructions because I think it has something to do with a Certificate, but nothing works. The macro that is showing up is c:\program files\microsoft office\office 10 \startup\LEXlink.dot. This obviously has something to do with a LEXIS program I installed, and I am really not sure if I will need this macro. Short of trying to delete the file is there any way to let word know that the macro is safe, so I don't have to click "enable macro" everytime I start Word? Tag: Lost all my macros Tag: 75878
  - 10
    - in heading style, removing 'keep with next' the problem with 'keep with next' is that #2 heading numbering doesn't start again after an intervening #1 heading, etc. - the result is I, A,B, II C, D, III, IV, E, F - so, it works for#1 headings - but it is unacceptable for #2 (or #3) headings - without it working, you can't make a correct Table of Contents Tag: Lost all my macros Tag: 75877
  - 11
    - Show/ Hide Symbol I am using Office XP with all the service pak's. In my word documents the show/hide symbol appears. When I click the show/hide icon to make it disappear so only the I-beam marks the placement of text the show/hide symbol will not disappear. Tag: Lost all my macros Tag: 75871
  - 12
    - WINWORD.EXE- Application Error.......The memory could not be "read" When I try to open an existing file and even opening a new file I ge this error message: Microsoft Word: WINWORD.EXE - Application Error The instruction at "0x01f6216b" referenced memory at "0x00000000". Th memory could not be "read". I've been on the Microsoft website and installed ALL the Office update as well as ALL the Windows updates my computer needed, after scannin for updates. I restarted, and I still get that same error message. Any ideas? Please help ----------------------------------------------- ~~ Message posted from http://www.ExcelTip.com ~~View and post usenet messages directly from http://www.ExcelForum.com Tag: Lost all my macros Tag: 75868
  - 13
    - Hyperlinks won't format Hey guys, thanks in advance. Have Word 2000 and recently it hasn't been letting me format any hyperlinks. When I do type one in it looks like this {HYPERLINK "http://www.yahoo.com"}, without being blue or underlined, just the black text. The same problem happens when I try to copy/paste from a web page. All of the hyperlinks revert to text that look like the example above. I've gone through the tools -> autocorrect path and checked the format box and unchecked it and also reinstalled word, but nothing seems to help. Any suggestions. Tag: Lost all my macros Tag: 75863
  - 14
    - Word 97 loses font selections Recently upgraded from Office 95 to 97 and also to Windows 98. Word will not access all fonts when new document is opened, but they are contained in the appropriate Windows/Fonts folder. It also does the same when a Word file from another computer is opened. Tag: Lost all my macros Tag: 75862
  - 15
    - Delete Block & Home problems I used to Block text, hit Delete, and it was gone. Now I get a little message on the left end of the Statue Bar that says "Delete Block No(Yes)"-- how do I get back to a simple one-step delete?? (It works OK in other programs, just not Word). Also, when in mid-page in Word, I used to hit "Home" and the cursor immediately jumped to the beginning of the line. Now it does nothing until I hit the left arrow too (after)-- then it jumps to the beginning. "End" works fine. Again, how to get back to one step?? Thanks in advance for any "HELP"........ Tag: Lost all my macros Tag: 75858
  - 16
    - Problem with Inserting objects from file in Word XP I have a problem with Word XP that just started to occur. If I drag and drop a file or use Insert|Object|From File I get the error "Word cannot obtain the data for the blah.blah link." I have no idea why this has stopped working. I've tried all the usual web searches but can't find a fix. Anyone have a solution? Thanks Cameron Tag: Lost all my macros Tag: 75854
  - 17
    - Server threw an exception Clip Organizer cannot complete the operation. The server threw an exception. Error Code 0x80010105 I had this problem with Word 2002 and still have it with Word 2003. What do I need to do to fix this? Thanks for any help. Tag: Lost all my macros Tag: 75853
  - 18
    - Word 2002 will not load files Suddenly Word 2002 will not load any .dot or .doc files. I just installed McAfee virusscan ver 8. And I uninstalled and rein stalled Word with no change. Tag: Lost all my macros Tag: 75848
  - 19
    - arbitary overwrite from attached normal.dot WORD 2000 From time to to time, in say 5-10 page documents, exactly 256 bytes of stuff overwrites the current text. The 256 bytes are copied from Normal.dot attached to the current document. (The first 128 bytes can be found exactly in the original Normal.dot file). Confirmed by examining the documents and normal.dot using a hex editor; for several different documents and 4 different normal.dot's since its happening to 4 people on 4 different computers). Anyone else experiencing this ? Tag: Lost all my macros Tag: 75847
  - 20
    - Word Opens w/previous doc I have MS Word (XP). Recently, every time I open up word, instead of starting with a blank page, it starts with an old doc and calls it document1. Can you help, because I am at a lose to know what to do. Thank You Doug lonewolf1a@att.net Tag: Lost all my macros Tag: 75845
  - 21
    - abnormal program termination When I close a Word file I get a Runtime Error! message, and the program must be shut down. Does anyone know how to resolve this? Tag: Lost all my macros Tag: 75843
  - 22
    - lost # on jewel case for installation I recently had to replace the hard drive on my laptop. Afterwards, Windows ME works fine but I need to reinstall Microsoft Word 2000. I have lost the jewel case that has the # needed for installation over the past year. Is there another way to install Word or is my CD useless? Tag: Lost all my macros Tag: 75837
  - 23
    - XP Word keep trying to install After an upgrade of office 2000 to office XP, AND I try to open word for use the installation start up and ends in the following error error 1606 could not acess network location %:lluserprofile%\application\data\Microsoft\officer\data Also It will not allow to Repair\Remove\Install I always get the error above. Tag: Lost all my macros Tag: 75836
  - 24
    - Word documents frozen I have Microsoft Office XP Pro SE (2002) loaded on a Windows 2000 PC. I started experiencing problems with Word files freezing up, first intermittantly which progressed to every time I try to open a new or existing file. I can type one or two letters and then it freezes. If I do Control, Alt, Delete and cancel out of it, often it unfreezes and I can type another letter or two, but then it freezes again. I have tried all the fixes that I found listed but nothing helped, including uninstalling both Office and Windows and reinstalling. I then reformatted the hard drive and started fresh, hoping that if it was due to a corrupt Registry, then the problem would be fixed. But exactly the same thing is happening. I have spent so much time on this and I still can't use Word. Now I am wondering whether it is a compatability problem with other software. I have Adobe Acrobat 5, Symantec Antivirus Client, and the All-in-Wonder Radeon 8500DV installed. Has anyone heard of incompatibility issues with these products? I hope someone can help! Thanks, Sue Tag: Lost all my macros Tag: 75833
  - 25
    - Symbols in Equation Editor do not work Whenever I use Equation Editor, the =, + and - symbols appear correctly when I type, but when I close the Equation Editor box they are covered by strange black symbols, circles and other shapes. It also happens with symbols like alpha and beta. Sometimes symbols in normal text i.e. not in Equation Editor, do not show themselves correctly either, although =, + and - do. Equation Editor works fine in WordPad though. A friend said it may be due to my printer, which I am having problems with, as it may be unable to print the symbols and so they do not show up properly on screen. However, I uninstalled the printer and the problem has not gone away. PLEASE can anyone help? On an unrelated (probably?) note, my Word has a small faint "half open square" made up of two short lines with the point of the half square nearest to the text, in each corner of every page above/below and to the left/right of all the text. This could be due to my printer as well, although the lines do not appear on printouts as far as I am aware. Tag: Lost all my macros Tag: 75832
- Next
  - 1
    - Run time error 2147.... Word 2000. Following a crash moving and resizing a graphic I get the above error message each time programme is opened. Cancelling allows entry but standard toolbar has gone and File and Tools buttons on task bar do not operate. Everything else works OK. Any suggestions as to how to overcome? I have done a complete reload of OFFICE but problem still persists Tag: Lost all my macros Tag: 75829
  - 2
    - Locking Documents I am using Microsoft Word 2000 SR-1 on a Windows ME system. My word documents sometimes lock up on me. I am the only user and not on a network. How are these documents locking up, and what can I do to unlock them ? I checked the Microsoft site, and it says to use CTRL+ALT+DELETE to open the Windows Security dialog box, but when I do that, I only have choice to end task. I have done a search on my computer for Windows Security, Task Manager, and Winword.exe and I don't have any of these things. Can someone please help ? Thanks in advance Tag: Lost all my macros Tag: 75818
  - 3
    - Adobe error Word 2002 disabled Adobe. I enabled it, but still can't get the icon to appear within Word. I don't know how to convert my Word documents to pdf. Tag: Lost all my macros Tag: 75817
  - 4
    - Word 2002 Hangs in Open dialog Box In Word 2002 (10.5815.4219) SP-2 when I open the Open Dialog box and click the down arrow on the Look in: field Word hangs for about a minute. It evetually comes back with the diretory listing. If I have switched to another app while waiting, the directory listing window apears in the app I have switched to(Just the directory listing window not the entire Open Dialog). This problem occurs with Excel as well. I am running Windows XP Home 5.1.2600 SP1 Build 2600. Is anyone else seeing this problem? Any solution? Thanks Jay Tag: Lost all my macros Tag: 75811
  - 5
    - msword 2000 file saving problem Hi I am a user of MsWord 2000. When I am saving a file, I am getting following error. This is not a valid filename. Try one or more of the following. *Check the path to make sure it was typed correctly. *Select a file from the list of files & folders(D:\) Could any one help me to get rid of this error. Rest of the Office products are working ok. Thanks pappu kiran WireFree Innovision Tech. Ltd. No.54, Richmond road. Behind Big Kids Kemp Bangalore-560025 karnataka(state) India. Phone:080-5594911 ext 43 e-mail: pkiran@bplitl.com Tag: Lost all my macros Tag: 75810
  - 6
    - MS word help 2000 When I try and open MS word help, nothing happens, but when I click on ctrlaltdelete it says I have anywhere from two to six mshelp's open. Can anyone explain this Thanks sally Tag: Lost all my macros Tag: 75809
  - 7
    - Microsoft Word Crashes I have Microsoft Word 2000 installed on my Windows 2000 computer an everything works fine. However there is another computer in the office. Both are connected vi the network but if I shutdown the second computer then Word 200 crashes with a GPF error and does not work again until I turn on th computer. In essense, word does not function without the secon computer being active and connected to the network? I have tried uninstalling office 2000 and re-installing whilst no connected to the network and the problem persists. Does anybody hav any idea how I can get around this? Cheers in advanc ----------------------------------------------- ~~ Message posted from http://www.ExcelTip.com ~~View and post usenet messages directly from http://www.ExcelForum.com Tag: Lost all my macros Tag: 75804
  - 8
    - msword 2002 problem I hope you can help. Installed MSword2002. When I type my page it becomes black and the type is hidden due to the font color also being black. Anything I enter on the page is typed under this black screen. If I hit enter or pg down I see a full page of black as if the page has been selected or highlighted. I cannot see what I type unless I change the font color to white. ( black page white print) or unless I use reveal then clear. I have uninstalled word and then reinstalled but it returned the exact same way. I have tried to change all types of formatting codes to no avail.. please help. Ran a virus ck. program ok It happens on every document I type in word. Tag: Lost all my macros Tag: 75803
  - 9
    - Internal Error 2349 - Detect Repair Word 2000 SR1 Pro Ran a Detect & Repair Option on the above and during repair received the following: "INTERNAL ERROR 2349 Please contact product support for assistance" Followed by: "Setup failed" Was online at the time and had CD installed. Can anyone help with solution to this problem. Graham Page Tag: Lost all my macros Tag: 75802
  - 10
    - Very Weird Problem with Word I have Word 2002 that came shipped with my PC together with Works Suite 2002. Had been running sluggishly so I thought I would Remove then Add using add/remove. Removed and reinstalled but would not work. Now I can't remove even. Get message Patch Pacakge cannot be opened. Verify that patch package exists and you can opend it ..... I also tried intalling word 97 just to see if that would work and have same problem. Can someone please give me an idea of what might be wrong ? Thanks Tag: Lost all my macros Tag: 75798
  - 11
    - MS 97 used with Athlon XP1700 (1.5GH) I used Word 97 OK on old 330MH processor. It worked fine. But my faster new processor is causing Word to overlook text data pasted in from an outside program. Case in point: I send Bible scriptures to the Word 97, using the paste command ^(v) from a 'side by side' running program. Sometimes the send 'appears' to have worked, but no scripture text appears in Word. Maybe another 'send or two' will cause it to be accepted. Also I call for a single spacing between scriptures. This spacing changes, sometimes one, maybe two spaces the next time. Also the text scroll speed gets out of hand, too fast! If you try to select text to highlight, when you hit the bottom of the screen, it goes into overdrive to the end of the text. CAN THE SCROLL SPEED BE SLOWED DOWN? Any solutions? Thank You, Ken Boyer Email PatKen@paonline.com Tag: Lost all my macros Tag: 75797
  - 12
    - Word Not Printing Right All, Im using a Office XP with Service Pack 2 installed with Windows XP Professional as Operating System. Everytime I use the Word application and typed up a document and print, it comes out just on the left side of the paper the whole paragraph is the left side. I check the printing settings and all that, I also check the settings on word but I still get the same result. Any help I would really appreciate it... Here is the error message that Im getting "The margins of section 1 are set outside the printable area of the page. Do you want to continue?" Thanks in advance.... Tag: Lost all my macros Tag: 75796
  - 13
    - error in winword.exe I have Works Suite 2000. This week, when I try to open Word from Works Suite, or a Word document from the History portion of Works, or when I click the File tab on Word, I get a message that says: winword has caused an error in winword.exe winword will now close. Anyone know why and what I can do about it? Tag: Lost all my macros Tag: 75795
  - 14
    - Word Stops Responding with Bullets and Numbering Windows XP with Office 2002 and latest updates. Everytime that I try to use, or edit "outline" Bullets and Numbering the program stops responding. I can format several lines to use simple numbering, but the results are unexpected as text randomly jumps throughout the document. I've tried to repair the installation, uninstall and reinstall, and tried to create new documents with no change in this problem. Please advise. Tag: Lost all my macros Tag: 75794
  - 15
    - Cannot change fonts When I try to change fonts in Wort 97 I started getting an error message saying Cannot load Library "lxaiPRP.DLL. This just started and I can't change fonts at all. Thank you Tag: Lost all my macros Tag: 75792
  - 16
    - Office 2003 - EVAL Hi everyone, I had installed the 30 day Eval copy of office 2003 for myself and the office manager here, to test it out. Everything was working fine for a couple of weeks, and then one morning, we both had latency issues opening up word and excel. I had uninstalled and then reinstalled, still the same problem. This happens whether we're opening an existing document, or if we open just the app and then open the file from there. This also happens whether it be a new doc created in 2003, or one that was created in XP and then opened in 2003. I have gone to http://word.mvps.org/FAQs/AppErrors/ProbsOpeningWord.htm but i am not sure if any of these solutions can help out with 2003. I haven't found any latency issues with power point or access as of yet. Any feedback is greatly appreciated in advance. Thanks! Tag: Lost all my macros Tag: 75785
  - 17
    - Saving files in Word 98 Files take forever (3-4 minutes) to save in Word 98 after installing SP4 in Windows 2000. Are there compatibility problems? Tag: Lost all my macros Tag: 75784
  - 18
    - Saving Word 98 files Ever since installing SP4 on Windows 2000, when saving files in Word98, the program hangs and takes 3-4 minutes to save a very small file. Is Word98 not compatible with Windows 2000 SP4? Tag: Lost all my macros Tag: 75783
  - 19
    - can't uninstall word 2002 i have work suite that came with my dell xp. I had to put on a different hard drive and now i can't get word 2002 to uninstall. It says it can't read the patch package. I don't know what that means. I went to knowledge base but didn't know what i was doing. the rest of the suite uninstalled fine. Tag: Lost all my macros Tag: 75782
  - 20
    - Not enough memory or disk space... Hi I'm getting this error when tryinng to print from word using the file>print option. Printing works when i use the icon on the tool bar. Machine has plenty of memory and hdd space, and the temp dir is empty. Also get the same error when trying to save a doc. Also same error when trying to send email in Outlook. I also tried removing Office and reinstalling...Any words of wisdom would be appreciated. Tag: Lost all my macros Tag: 75781
  - 21
    - Formatting I have a user running Word 2000 and who prints to an HP4ML printer. When she prints, some of the letters print on themselves. I've tried a couple of driver changes (PS) and they didn't help. I'm trying to get a PCL driver, but have been unsuccessful. Is this a driver or Word problem? Thanks, John Tag: Lost all my macros Tag: 75777
  - 22
    - Word 2000 Format Changes When I make a format change on one line in my document in Word 2000, it changes the entire document; if I click "Undo", it changes the rest of the document back to how it was, except for the line I wanted to change originally. Any ideas? Tag: Lost all my macros Tag: 75774
  - 23
    - Unable to save: visual basic pop-up After many years of running with no particular problems, the PC woke up and claimed some sort of Registry Error, which is said it could correct. After "correcting" itself most programs required re-installation, Norton anti-virus will not come up and Word will not Save other than as "Document 1". At the start and end of each Word session I get two pop- ups: The header says "Microsoft Visual Basic" The texts are "compiler error in hidden module: autoexec" and "compiler error in hidden module: main" I have reinstalled Office 97 twice, with no change. What do I do now? (Also, I am not in the US now, a further complication.) Franklin Porath frankporath@hotmail.com Tag: Lost all my macros Tag: 75773
  - 24
    - Why is the document messed up after 'Print Preview'? It happened on two of my XP Word files each of which is less than 1MB. After I pressed the 'print preview' button, the document got messy with figures overlapping each other and a lot of messy characters. I closed the file without saving it, and opened it again, but it was still the same. The strange thing is that after I waited for a couple of minutes and opened the file again, it recovered with only a few text boxes shifted from their original locations. Could anyone let me know more about this? It is quite scary! Thanks very much! Tag: Lost all my macros Tag: 75772
  - 25
    - word runtime error 5894 I trying to select a footer or header range in word vba code. error message reads "command only available in print layout mode. the code will process if i change the layout mode on word (toolbar -> view). but if I change the view mode in code using wdPrintView i still get the error any ideas anyone ta Rob Tag: Lost all my macros Tag: 75766

I had a driver problem with a label maker while using word.
...so I installed the label maker, and in the process I
have lost all my macros....where did they go?

Top

Re: Lost all my macros by Richard

Richard
Sat Jan 24 04:20:13 CST 2004

They should be in the Normal template. Hope you made a backup copy.

"AKB" <anonymous@discussions.microsoft.com> wrote in message
news:436d01c3e37b$b86b05d0$a601280a@phx.gbl...
> I had a driver problem with a label maker while using word.
> ...so I installed the label maker, and in the process I
> have lost all my macros....where did they go?

Top