Can't open .jpg in Word, says it is not a valid Win32 file

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - "file permission error" warning When saving the same Word document now, after having used it for a long time continually, I receive a warning that says: "Word cannot save your document due to a file permission error." This does not allow me to save the new changes to the document right away, but if I try to save it again, it does. The warning is recurrent and I cannot get rid of it. What do I do to circumvent this problem? Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105709
  - 2
    - normal.dot I just got a new Dell Dim E510 computer with Windows XP and I installed Word 2000 from MS Works Suite and some add ins also got installed. If I look in Add/Remove it lists it shows the following: Microsoft Works 2000 Microsoft Works 2000 Setup Launcher Word In Works Suite Add-in On my new computer with XP: When I got this new XP computer I had my files and settings transferred (including Word files). My computer came with WordPerfect ,but I did not like it so I installed Word 2000 as mentioned above. When I close WORD documents, I get many messages re changes have been made to the normal dot template, changes have been made to the global template, locked for editing etc. No matter what I select to do, I still have trouble. I have deleted and recreated the normal.dot template according to directions at http://www.officearticles.com/word/about_normal_dot_in_microsoft_word.htm (I thought these were very good directions). Dell software support had me uninstall and reinstall WORD. I may or may not have tried to remove just the Word Ad-Ins - I don't remember anymore. WORD has been reinstalled and the Ad-ins are back. I need very specific step-by-step directions from an MVP if possible on how to get rid of these messages. I understand it is not a good idea to just close the office assistant. On my old computer with Win. 98SE I know these messages can be gotten rid of. When I first had Win. 98SE with Works Suite 2000 I had the same problem. Someone at Microsoft (for a large fee) got the problem straightened out. I do not remember exactly how it was done. I had NAV on the Win 98SE system and there was an option to enable office plug ins. I had to disable them because Norton always wanted to run a virus scan on every word document I opened. That fixed the virus scan issue. I do not have NAV on this computer. I have McAfee Security System. I believe the other issue of always getting normal dot change messages had something to do with the add-ins and may have been fixed by removing them; however, I believe I was told at the time that might cause a problem. I believe the problem has something to do with the Works 2000 Task Launcher. I did not use any other programs in the Works Suite so I suppose this did not matter to me. Should I just remove the Add-Ins on the XP? Many thanks Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105707
  - 3
    - Font is messed up "there is insuffiecient disk or memory space" He I keep getting a message saying that there is insuffiecient disk or memory space word cannot display requested font and now my term paper is all messed up and is just a bunch of grey bars what should I do. Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105705
  - 4
    - MSC Files This problem happes to me before and someone gave me a good hand, but I can't find it in my files. My files with extension MSC "Administrative Tools" do not open anylonger. It might be they are corrupted or simply with light problems. Anyone had this experience and can assist me ?? Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105700
  - 5
    - how to disable accessing clipboard from web pages hi when ever i open a webpage i am getting a message window showing " do u want to allow this webpage to access the clipboard " options: allow, dont allow . when i hit any one the window is closing and opening and more over the original webpage is also not working without closing this. help me regarding this Thanks in advance Regards, Sai Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105699
  - 6
    - Opening Word at a different point How do I change which file Word opens at when initially opening a file ? Blair Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105697
  - 7
    - In Help, you refer to "'hanging indent" with "Left Indent" icon. In reviewing online MS Office Help on the types of "indents", the instructions referred to a "Hanging Indent", which should have had an icon shaped like an upward pointing arrow. However, the icon displayed was that of a "Left Indent", which is shaped like a "box". This should be corrected. I reached this "Help" section by searching under "Set Margins" on MS Office Help and selecting the first selection, starting with ""Measure up .... " ---------------- This post is a suggestion for Microsoft, and Microsoft responds to the suggestions with the most votes. To vote for this suggestion, click the "I Agree" button in the message pane. If you do not see the button, follow this link to open the suggestion in the Microsoft Web-based Newsreader and then click "I Agree" in the message pane. http://www.microsoft.com/office/community/en-us/default.mspx?mid=da6143f8-d686-4561-a8d0-544e4d48c09f&dg=microsoft.public.word.application.errors Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105696
  - 8
    - Word keeps formatting entire text when I highlight one line I am writing a document, from scratch (not editing another file). Every time I try to format a line (like preceding the next section), the entire page of text reformats. I have tried deleting checs on boxes in Autocorrect and Auto correct while you type, and gone in to all the other options under the Tools Options menu, removed the track changes tool bar and looked at the revealed formatting. Still can't get this to stop "spreading" the format changes. Help! -- Jaramya Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105691
  - 9
    - Word 2003 "key" errors I have a user converting to Office 2003, and in Word, she has found two features that don't appear to be working: 1. When she highlights a word and presses the Delete Key, she gets a message "Delete Block?", and she has to press Y for yes to delte the highlighted text. 2. When she uses Ctrl+Home to get to the beginning of a document the she gets the Find and Replace dialog box (it also works correctly with the Ctrl+G and Ctrl+F). Anyway, I've looked in Tools/Options and can't find anything that is turned on that would effect this? Appreciate any help! Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105690
  - 10
    - Document reformats into a column Hello, Word 2002 - When I typed a letter and send it to the printer the text goes into a column. Then when I open up a new document I can only type in a column, which I have not selected to work in a column at all. Thanks, Jay Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105688
  - 11
    - User Loses Graphic Headers Hey Everyone, I have a user that loses her graphic headers when she tries to print. Loses them in print preview and on the printout. Others can print this document without losing the headers. So I am thinking that nixes the corrupt document theory. nay ideas? Thanks! Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105683
  - 12
    - Opening Word 2003 New install of Office 2003. When opening Word get this message: PROBLEM WITH SHORCUT...."the d rive or network connection that the shortcut "shortcut to MARKETIN.Ink" r efers to is unavailable. What the heck? It bogs down opening the application and the window pops up twice. Tried uninstalling and installing Office, still get this message. Not using a shortcut to open Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105680
  - 13
    - Compile Error - Only when Word launched from Outlook I have a set of global templates stored in the STARTUP folder. They perform a variety of functions customising Word for use in our company. We have recently found that there seems to be a problem when printing an attachment in an email message, or opening an attachment from an email when Word is not already open. We get a compile error "Compile error on hidden module bPrint" We can then see that one of the templates has been disabled, and have to enable it in the list found in Help, About MS Word. I know that users should not be opening/printing attachments from emails, but they still do and then phone us to complain that nothing works. I thought that the customisation of the Normal.dot may have been causing a problem, so I removed that a couple of weeks ago, and it doesn't seem to have made any difference. Has anyone seen this before or have any idea what might be causing it? It's causing some major headaches now! Many thanks, K Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105677
  - 14
    - Using Word 2003(XP), text boxes and WordArt not printing. Help!! When Word documents are created with Text, text boxes and wordart, only text is being printed. Have three Canon printers that all work OK otherwise. Canon say my trouble must be in the Word programme. Can you help me please? Keith Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105673
  - 15
    - Deactivate Office from old to new computer How do I deactivate Office from my old computer to my new laptop? Is it necessary for me to deactivate one for the other, or is there a way to use them on both computers? Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105670
  - 16
    - Start up compile error I installed Office 2003 on my laptop computer and I receive this error when Word starts and when exiting. "Compile Error in Hidden Module AutoExec" I tried reinstalling Office and the error still in there. I have checked the other programs in the office suite and they all start correctly. Is there any way to correct this. thanks Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105668
  - 17
    - "unavailable" documents Word 2002....second re-installation. I have a number of doc.s in the My Documents folder. When I try to access them on my laptop I am greeted by an error message: The file XXXXX is not available (XXXXX being the title of the document). I can copy doc.s to a disc and use them on other computers, but not my laptop. I've tried removing and re-installing Word to no avail. WHAT am I doing wrong? Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105664
  - 18
    - how do I stop a file appearing when i open word When I open word I always get the same file appearing which I then have to delete to cotinue Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105663
  - 19
    - "uninstallation procedure ignores if installed files are in use" i am getting a problem during the uninstallation(MSI) if the installed exe file are in use that means this file is locked.it simply ignores the files rather than showing a dialog box message during uninstallation procedure.it happens only with the exe file of less size.i am not getting the thing why it is showing this type of behaviour.plz suggest... Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105660
  - 20
    - Misspelling of SI units Notice kWh exist whilst kW/h do not exist and no warning appears in MS Word. Conversely GWh exist and MS Word ENG version underlines it as misspelling suggesting MHz instead which in fact exists but has nothing to do with energy units. ---------------- This post is a suggestion for Microsoft, and Microsoft responds to the suggestions with the most votes. To vote for this suggestion, click the "I Agree" button in the message pane. If you do not see the button, follow this link to open the suggestion in the Microsoft Web-based Newsreader and then click "I Agree" in the message pane. http://www.microsoft.com/office/community/en-us/default.mspx?mid=3f1df5ce-c167-46fb-9a95-a3f628aed9ad&dg=microsoft.public.word.application.errors Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105653
  - 21
    - SI units are symbols, not abreviations: km & kWh vs km. & Kwh. MS Word spelling in Spanish suggests the referred abreviations. This is corrected in the English language version using the symbols instead. Besides SI international standardsSpanish language in particular differentiates between symbols and abreviations. No abreviation is recognized for units and they must be displayed in full or symbol only. See DRAE apendix ---------------- This post is a suggestion for Microsoft, and Microsoft responds to the suggestions with the most votes. To vote for this suggestion, click the "I Agree" button in the message pane. If you do not see the button, follow this link to open the suggestion in the Microsoft Web-based Newsreader and then click "I Agree" in the message pane. http://www.microsoft.com/office/community/en-us/default.mspx?mid=2870f5b9-1c0f-45ac-a6ae-8df7b716f593&dg=microsoft.public.word.application.errors Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105652
  - 22
    - Footnotes that appear on a page before the "insert" I have a 30 page document where footnotes seem to get corrupted. In addition to appearing at the bottom of an earlier page, they also skip some numbering. This is as though there are hidden inserts. When I do a find, there do not seem to be any extra inserts. Any suggestions? Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105650
  - 23
    - New 3-1/2 inch disks. Can't retrieve any files. I have used some new 3-1/2 disks and saved files on them for a couple months. Now I can't retrieve any of the files. Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105646
  - 24
    - Word 2003: Save: File permission error I create a document, save it with a name to MyDocuments, and start typing, saving frequently. My documents is on Drive C, there is plenty (10's of gigs) of space available. Then I'll get a file permission error when saving. If I instruct it to try again, it renames the file Backup of MyDocumentName.doc, but then gets the error again. Try again and it renames it Backup of Backup of MyDocumentname.doc. Eventually I loose the document or it becomes corrupted. MS KB's indicate network problems (No, I don't think so, this is Drive C we're talking about), or not enough space (not the problem), or anti-virus software (well, this is MS One Care installed, but I tried disabling that and the problem still recurrs), or issues of "page file expanding" (to eliminate that as a possibility, I set the page file to a fixed value of 4096 min, 4096 max, so it cannot be changing!). So, now I'm stumped. Any thoughts folks?? Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105645
  - 25
    - can't open email attachments or click into open documents My client is using Office XP Word 2002. Openning attachments opens Word but not the document. If I click to open a document from My Documents or other folder (explorer), Word opens but not the document. If I open Word and find the document and open it, the document opens but I cannont click into it. I can use my arrows keys to go into the docment and edit it but can't click into it. If I run Word in safe mode I can click into the document and open e-mail attachments. I have no firewalls running, have run Norton full system AV scan, updated and ran Spybot and AdAware and have found no problems. All this use to work 3 weeks ago. My client is not aware of any changes made to the system 3 weeks ago. Any thoughts? Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105630
- Next
  - 1
    - Adobe Acrobat Tabs disappear I convert word files to Adobe acrobat every day during for my work. on the top of the word document there are usually two adobe tabs to convert the documents. sometimes these disappear only to reappear later. sometimes they never reappear causing me to reinstall acrobat. any ideas? thanks in advance. -- bob Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105629
  - 2
    - All documents opened within Word 2000 open as read only I don't know why this is happening but all documents opened within Word 2000 open as read only. If I go through windows explorer and open the document it opens fine. I'm using Windows XP SP2, Office 2000 and files are stored on a Windows 2000 file server. Help!! Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105628
  - 3
    - microsoft word corrupt files I type up a document and save it. When I go back to the file some of charactors have been changed to jibberish. Office version 2003 Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105627
  - 4
    - Why do my new documents in word 2003 have the 1 on them? If I start a new document, it already has the number 1 on the left margin. I can't delete it, the numbering key isn't on, and it prints it when I use the document anyways? Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105625
  - 5
    - Duplex printing error in Word 2007 When I try to do duplex printing in Word 2007 Beta 2 I have a problem. If I print 1 document it works fine. If I then try to print another document it ignores the duplex setting in the printer properties and prints single sided. To overcome this I have to shutdown the document and application and then restart it all, print 1 document, shutdown, etc, etc. Other than that I quite happy with 2007 Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105624
  - 6
    - Event Type: InPageError: P1:c000009c, P2:00000003 can not use word WERb6de.dir00 Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105622
  - 7
    - Word 2007 Address selection error In Word 2003, I created a page of labels. Each label contains a unique address. In Word 2007, if I highlight an address in one of the labels and choose "Mailings - Envelopes", an addressed envelope is generated but frequently it uses one of the other addresses on the page and not the one highlighted. e.g. if the text in cell A2 is highlighted, the address that appears is from cell C1 (it is always the C1 address that appears when it goes wrong). Note: This is when highlighting text within the label. If the label (cell) itself is selected, the address that appears is always the left hand label in that row. Is this a bug or am I doing something wrong? -- Paul Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105621
  - 8
    - Word 2003 locks up every time I click save? I'm writing papers in word 2003(win2000sp4)sp2. and I click the save icon and every thing in word locks up ultimately loosing my info. "I'm not going to tolerate this much longer" its not plug-ins took them out, Oh, when I try to shut down I"m plagued with Normal.dot already exist, no matter what I click I can't get it to go away. The only reason I use windows any more is for Office. They better patch this quick. Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105619
  - 9
    - "the file normal.dot already exists..." Hi, I have seen lots of posts about people getting this error when quitting word. However, a friend of mine gets it every time he logs in (on XP Pro he is using multiple accounts simultaneously and there is one specific account that gives this error whenever he logs in) any ideas what might cause this? Andy Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105618
  - 10
    - normal.dot This is the one thing that has caused me the most aggrevation over the past 6 years. The more I read about it, the more confused I become. On my Win98Se I had Works Suite with Word 2000 Word also has add-ins. I was constantly getting messages about normal dot, global templates, read only files. Finally someone fixed it somehow. I think they deleted the Word Ad-in or plug-in and I never had that problem again. Now I have a Windows XP. It did not come with Word pre-installed so I put my Word 2000 on the system. I guess it put a partial Works 2000 on also and the Word add-ins came in with the Word. I have a 30-paid software support from Dell and they tried several things like removing the Word Add Ins from Add/Remove, deleting normal then showing hidden files and deleting normal.dot and even uninstalling and reinstalling Word to no avail. What is the magic fix? Any help will be appreciated. Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105616
  - 11
    - Removal of Occult Data Hi! Whenever I open the Word, he/she appears a dialogue box with the title: " Removal of Occult Data: I wander when beginning the tool of Removal of Occult Data. Try to reinstall her ". How should I proceed? Thank you. Fernando Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105613
  - 12
    - WHERE IS A SAVE OPTIONS LOCATED AT? Hello dearest, Today I am posting these questions, because I really do not know how to find out how to work of problems. That why I really need help from all of you people, please help me to solving out, Thanks. PS. I have open an application forms, and when I get into an application forms trying to filling out, however I cannot typed. Is because of the hand have showing and it will not let me type. I cannot figure out how to solving problem. Could you please helping me to solving out of those problems please? Thanks. My e-mail address is (tolovingyouforever4@yahoo.com); please reply an answer back to me, Respectfully yours, A.H.K. Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105606
  - 13
    - I want to change web formatted page to normal blank page in word Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105604
  - 14
    - How to use command line to create a new document based on a templa I try to create a new file with this command line: (...)\winword.exe /tMyPlantilla.dot I get an error message of this type: "The file you tried to open was not found. ..." If I try to use normal.dot or any of my own templates located in the template directory I always get the same message. Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105598
  - 15
    - When I save a form in word it is convereted to a straite word dou when I save a form in word it is converted to a strait word doucment and will not work as a form again Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105593
  - 16
    - RoboHelp/Word 2002: Topic Titles/ID Automatically Changing Iâ??m posting a problem/solution that my team ran into recently in hopes that it will save other people time if they find it also. Problem: I have a Help project created on an XP machine, using RoboHelp Classic, with Word 2002. There are over 1500 topics in the project, It is compiled as Webhelp, contains 1,667 objects, and is 22.8 MB in size. While working in my project this week, I noticed 4 of my topics in the RoboHelp Explorer view suddenly had a prefix of "placeCity" in front of the topic title. It only appeared in the explorer view and the Properties dialog, but not in the document or topic itself. When I tried to change the topic title in the Properties dialog and save, it acted like it saved, but when I looked in the explorer view, they still had the strange, new prefix. Then I noticed approximately 6 or 7 topics had the words "State" and "stockticker" added to the topic IDs which showed up as broken links. But when I looked at the compiled Webhelp file names, they looked normal. I exited RoboHelp. When I went back in, I received the following message: "RoboHelp Explorer has detected that there are unregistered routines used by the following features in this project. -Html Topics or hotspot links to Html pages displayed in the Help window. -Link to a Html page, displayed in the browser. Do you want RoboHelp to make the necessary updates?" I never saw this message before so I selected Yes. (This message also appeared to another user on our network, crashed their computer, but their project was fine afterwards â?? they were using a Word 2003). I don't know if selecting Yes stopped any more chances of RoboHelp automatically renaming topic titles and topic IDs or what it did. I was afraid I might have a virus, so I spent a whole day running virus/spyware software. The results found NO virus but I did have some Malware which I removed. I didn't know if this caused my problem with RoboHelp or not. Solution: We had other users guide us that it could be similar to the font problem (with KB917334) that people were currently running into. We checked and found a Microsoft patch had been loaded around the time that our problems started: KB917335 for Word 2002. We deleted the patch, rebooted the system, deleted all of the rtf files from project, and then started RoboHelp. All issues were corrected. We have now turned off automatic updates to that computer until our release has gone out. Any ideas on other solutions? Will this be fixed in the future? Is this a Microsoft or an Adobe issue? Thanks, Annie Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105592
  - 17
    - Equation Editor menu always on in Word 2003 after crash. Help? I was working in Word 2003, using Equation Editor. EE crashed (pop-up window to send error report). Now each time I start Word, whether accessing that file or not, the EE menu (File, Edit, etc) appears above the Word menus. Does anyone know why and how to remove it? Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105591
  - 18
    - Having Trouble Opening documents in Word 2000 I am the IT person (such that it is) for my office. We have fairly new computers (about a year old) that have 111 GB of space, of which only about 19 GB is used. The computers have Norton's System Works and Personal Firewall on them. We also have an older copy of Word - Office 2000 Professional - on the computers. We've not had much problem with them until recently, and I believe it was directly after I downloaded a recent update from Office and from Norton's. I don't know which one is the problem, but I'd like to know what to do to solve it. Word documents open fine when you open them from anywhere BUT the "File, Open" commands inside Word itself. If you try to open a document from within Word, the Open dialogue and the list of folders and documents comes up and then it freezes. You can't click on anything, you can't open anything. Sometimes, if you wait about 5 minutes, you can click on a file that's currently in the window, but you can't scroll over past whatever the current window is. We've also had the problem where, if you do get it to scroll across the screen at all, it goes directly to the end of the document list, rather than one screen at a time, and you have no control over where it stops. We use Word a LOT at work and I'm getting a lot of complaints and frustration. Anything that could help would be very much appreciated. Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105590
  - 19
    - Word VBA 6.0 Vs VBA 6.3 I am currently running a macro in Word 2000 and VBA 6.0 which works fine. But when I try to run it in Word 2000 with VBA 6.3 on a different computer I am getting an error. Error: Compile error - Method or data member not found On Line: Verify.txtResult.Text Verify uses a text control from RICHTX32.OCX. It is very peculiar that it deos not work on VBA 6.3. Any idea why this happens and any resolutions??? Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105588
  - 20
    - word 2003 will not open at all after saving document from internet I reviewed a handout sample document from a library research seminar on the internet, then saved to my main computer and then saved again under a different file name. The file immediately minimized and would not open at all. You can see the minmize action but can't see the document. Tried opening Word 2003 itself and could not. Unable to open word or any word documents. Can save to a flash drive and open on another computer. I have a seminar presentation tonight at 6:30 PM, so HELP? Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105587
  - 21
    - trying to open file on cd. error mswrd 832cvn off 97 i have been given a cd with files saved on it some saved as rich text which are no problem to open and other saved as a word document but my computer will not open these. it comes with an error message "MSWRD832CNV". how can i get around this problem. my microsoft office is 97. Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105586
  - 22
    - Cursor Dissapears in Print layout View Hi, The cursor in Word 2000's Print Layout view dissapears if there is a spelling or grammar error on the line when presing the enter Key. Any assistance would be highly apprecitated King regards, Reema Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105585
  - 23
    - Is there a recent worm out that prevents MSword from opening? Every time I try to open Word or any document in Word I get an error message that says word has to shut down and asks if I want to send an error report. Also, I don't know if this has anything to do with it but when I reboot my pc I also get an error message saying lfpsd10N.exe cannot run. Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105580
  - 24
    - the text crunched altogether on each line When I went to print a letter I had just corrected, the text all crunched to the right hand margin, every letter on top of each other. What do I do? -- RJM Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105579
  - 25
    - How can doc be retrieved if Word experieced error opening file? I am needing to know if a word document can be retrieved if Word Experienced an error opening file. I need that document that is possibly corrupt. Tag: Can't open .jpg in Word, says it is not a valid Win32 file Tag: 105578

When I attach or try to open a .jpg within Work I get the error message that
iti is not a valid Win32 application

Re: Can't open .jpg in Word, says it is not a valid Win32 file by Buckland

Buckland
Sun Jul 02 14:47:39 CDT 2006

Hi Mark,

MS Word cannot open picture files such as JPEGs. You can use Insert=>Picture from File to insert them into an open document or copy
and paste them into Word.

If your Word installation has become damaged then Word may be trying to use an unmatched 'setup.exe' file from another program on
your computer.
========
<<"mark" <mark@discussions.microsoft.com> wrote in message news:EE44B666-73D5-4DA4-B17E-EF906FBFBFAF@microsoft.com...
When I attach or try to open a .jpg within Work I get the error message that
iti is not a valid Win32 application>>
--
I hope this helped you,

Bob Buckland ?:-)
MS Office system products MVP

>>*Courtesy is not expensive and can pay big dividends<<

LINKS to the 2007 Office System

1. Read about it, try it, or watch the movie :)
the 2007 Microsoft Office system info,
online Test Drive, or downloadable beta is at
http://microsoft.com/office/preview

2. Already have 2007 Office System Beta 2?
Send Microsoft your feedback (with pictures)
http://sas.office.microsoft.com/

3. Use the 2007 OfficeOnline website without Office2007

a. Install the ActiveX access control
http://office.microsoft.com/search/redir.aspx?AssetID=XT101650581033
b. then visit http://officebeta.iponet.net

Top