Re: can't start windows after power failure by Anna
Anna
Sun May 11 11:56:50 PDT 2008
> "OR" <oeivinr@online.no> wrote in message
> news:ua1CMzysIHA.2292@TK2MSFTNGP03.phx.gbl...
>> OS: Windows XP professional. I leave my computer running through the day
>> and switch it off at night. One day when the computer was running all by
>> itself, there were several power cuts/failures from the power company and
>> now my computer won't start windows. The logon sequence reaches as far as
>> the black screen after Post and Boot from cd: I see Windows Advanced
>> Options Menu flashing past, but no error message. Then the computer shuts
>> down and reboots all by itself. This goes on and on and it is very
>> difficult to shut down the computer. One has to pull out the power lead.
>>
>> Any suggestions what has gone wrong and how to solve it. I hope I dont
>> have to reinstall Windows
"Pegasus (MVP)" <I.can@fly.com.oz> wrote in message
news:%23t9T2HzsIHA.4848@TK2MSFTNGP05.phx.gbl...
> Press F8 repeatedly during the early boot sequence, then try booting
> into Safe Mode or "Last known good configuration".
"OR" <oeivinr@online.no> wrote in message
> Can't get into Safe Mode. The menu just flashes past. The computer reboots
> before I can do it.
"Pegasus (MVP)" <I.can@fly.com.oz> wrote in message...
> If you pressed F8 rapidly and repeatedly during the boot-up
> stage and if the machine did not pause with the usual boot-up
> selection menu then your boot environment may be damaged. You
> could try to boot the machine with a WinXP boot diskette. Here is
> how to make one:
> 1. Format a floppy disk on some other WinXP PC.
> 2. Copy these files from the i386 folder of your WinXP CD to
> the floppy disk:
> i386\ntldr
> i386ntdetect.com
> 3. Click Start / Run and type this command:
> notepad a:\boot.ini
> Now paste the following lines into notepad:
> [boot loader]
> timeout=10
> default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
> [operating systems]
> multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP
> Professional" /fastdetect /noexecute=optin
> Watch out - the last line is a long line!
> Save and close the file.
> 4. Change the BIOS boot order of your own PC so that it uses
> the floppy disk drive as its primary boot device, then boot
> your PC from the floppy disk.
OR:
It's possible this may be a hardware-related issue that's causing your
problem due to the A/C power failure (and possible power
surge(s)/fluctuations) that you recently experienced. But for the moment
we'll assume you're dealing with a corrupted OS brought on by those
power-related issues.
Assuming Pegasus's suggestion is a no-go...
And further assuming you have an XP Pro installation CD that will permit you
to undertake a Repair install, do so...
I trust you understand we're talking about the "second" repair install of
the XP OS that one can undertake using the XP OS installation CD, *not* what
Microsoft terms the Repair install when you first get to the Welcome to
Setup screen after booting to the XP installation CD. (That *first* Repair
option will merely let you access the Recovery Console - the "second"
Repair, in effect, reinstalls the OS on your system).
I'm assuming you have some familiarity with this process. (It's roughly akin
to fresh-installing the OS yet not tampering with existing programs,
user-created data, etc. that presently exists on your system.) But if you
need further details, so indicate.
Since you obviously have access to another computer, it would also be a good
idea in the meantime to download the HDD diagnostic utility that's usually
available from the website of the manufacturer of your HDD and check out the
disk. In most cases this bootable diagnostic program can be installed on
either a floppy disk or a CD.
If the Repair install is a no-go it could very well be a hardware problem
that's involved here.
Just one other thing...
Before you undertake any further measures with your PC in order to correct
the problem - whether it's what I suggested, or Pegasus's suggestion, or
anyone else's proposed course of action - if there is any user-created data
on the HDD that's absolutely crucial to you and which you could not tolerate
its loss - then before you do *anything* further re that system, either
install the HDD as a secondary HDD in another computer or in a USB or other
external enclosure and attempt to access its contents so that you can copy
off the data you need. Then you can play around with it.
Anna