XP DISC PROBLEM
I get a message on windows setup to insert a disc, when the disc I'm using
has been used to intall windows before. It is a HOME SP2 edition and has
upgrade on it, does that makes any difference? It boots from disc to check
pc, but then i get that once at install. Thanks please help Tag: When I open up Live Communications Server Admin Console??? Tag: 1917572
sp3/usb problems
Since upgrading to sp3 I've had numerous problems with usb
ports. I used one to plug in a Firelite external drive. It would show
up as removable drive I:. I uninstalled sp3. I'm back to sp2, but now
my external drive does not show up in My Computer. A check of Tweakui
shows many of the available drive letters having a red dot with a
question mark inside. Drive I: is one of them. Any ideas what the dots
mean? Since I use this external drive to backup my system I'm in a bit
of a panic! I used Device Mgr. to remove the usb ports and then they
reinstalled on the next boot. Any help please!! TIA Tag: When I open up Live Communications Server Admin Console??? Tag: 1917562
Insufficient system resources
Using Iomega Storecenter 022E52 1TB (i.e. NAS) with high end gigabit network
and laptop with 2 gig ram and 100 gig hard drive...
I cannot copy large files (i.e. 25 gig) to the NAS drive. Everytime it
makes it about 90% of the way through, and then fails. The error message is
always the same (from event viewer below): "Insufficient system resources
exist to complete the requested service."
Operation with partition "C:" was terminated.
Details
Tag = 0x0
Error writing the file. (0x40003)
function = "WriteFileNoCache"
Tag = 0x7CEB2CDC9FB1212B
Insufficient system resources exist to complete the requested service.
(0xFFF0)
code = FFFFFFFF800705AA
Tag = 0xBD28FDBD64EDB816
Please advise.
Bob Tag: When I open up Live Communications Server Admin Console??? Tag: 1917561
Microsoft Security Bulletin Revision
The revision I am referring to is MS07-042-CRITICAL. When I download the
appropriate version (Windows XP Home Edition SP2) before installation I am
asked whether I want to modify, repair or remove the item in question. I am
stumped as to what selection to make so any help would be appreciated so I do
not make the wrong choice. Thank you in advance for your help. Tag: When I open up Live Communications Server Admin Console??? Tag: 1917548
WMM Automatic shutdown
Recently windows movie maker has been shutting itself down for no reason.
Sometimes all I have to do is put a clip on the timeline and it shuts down
automatically, can someone please help me with this problem? Tag: When I open up Live Communications Server Admin Console??? Tag: 1917535
TRAVELLING WITH LAPTOP??!!! HELP!
Hi there, not sure if I am in the right forum but just a quich question...I
have a Sony Vaio and will be taking it to Italy for 6 months...any idea what
i would need or what kind of adaptor I would need in order for me to use it
over there?? could I just get a travel plug convertor? any help much
apprecciated! thanks very much!!
--
husky13 Tag: When I open up Live Communications Server Admin Console??? Tag: 1917526
Building a new PC
Hello
I am going to be building a new PC soon. Either dual core or quad core.
It will be running XP Pro
However Will I need a SP2 CD or will my SP1 CD work?
My licence is also OEM does this matter?
If it does matter what do I do if I cannot find another XP licence?
Thanks Tag: When I open up Live Communications Server Admin Console??? Tag: 1917525
Net framework 1.1 and 2
Hi folks,
I've just finished reading that when you install NF 2 after 1.1, it can
break 1.1.
If you use Media Centre and x64.
And you're meant to uninstall NF 2 or something then reinstall it to fix it.
I've also just noticed, this has happened on the PC I'm on now (using x32).
Both 1.1 and 2 are installed.
(under 1.1 in add/remove programs, its says readme, instead of a site. It
points to repairRedist.htm
Even tho the link under 1.1 says the 1.1 install maybe corrupt, would
programs that require 1.1 still run or not?? I
dont really fancy uninstalling .Net framework 2 after I've just installed
it, (and reinstalling it), just because of some cockup / bad programming.
Is there some kind of fix to fix it. So, 1.1 doesnt get screwed up after you
install NF 2? And to save someone uninstalling and reinstalling NF 2? Tag: When I open up Live Communications Server Admin Console??? Tag: 1917524
full name of shortcut icon
Hi
I usually have a shortcut icon on the desktop. It would be a very
important icon for my daily work. Its name would be also quite long.
Then I find I cannot see the full name of this shortcut icon, unless I
click it.
How to have the full name of this shortcut icon, even I didn't
click it?
Mike Tag: When I open up Live Communications Server Admin Console??? Tag: 1917518
burning windows xp to disk
ok, so I downloaded windows xp professional media center edition 2005 and it
came an rar archive. now to use this as a windows c.d. I have to burn it to a
c.d. as an iso. so How do I do that? I have Nero and when I click the option
for "burn image to disk" I have to browse for the file. and when I go to the
location of the file, it's not shown, I think that's because it's not an iso.
Can anybody help me please? If your confused I'll make it simpler. Windows xp
professional in a rar archive, how do I burn it to disk to use it as a
windows c.d. THANKS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Tag: When I open up Live Communications Server Admin Console??? Tag: 1917515
XP can not recognize second HDD
I added a new samsung spint point F1 1T hard disk (SATA) to my PC
(dell dimension 5100, which had a 250G HDD as SATA master already) .
The bios can see the new hard disk correctly. Also the boot disk
Samsung provided can see it, format it.
But when I log in XP (SP3), the new driver can not be see anywhere,
either in Disk Management or device manager.
Any suggestion ? Tag: When I open up Live Communications Server Admin Console??? Tag: 1917504
TO DOWNLOAD 64-BIT XP PROFFESSIONAL
it's fully free downloadable on
http://polticsinfs.blogspot.com/ Tag: When I open up Live Communications Server Admin Console??? Tag: 1917496
SQL Dumper library failed initialization
This is the message I get everytime I restart my computer at the log in page.
"SQL Dumper library failed initialization. Your installation is either
corrupt or has been tampered with. Please uninstall then re-run setup to
correct this problem."
I think I did this accidentally when I was in add/remove programs. All I
know is I removed something (I was in a hurry and tired) accidentally and now
when I restart my computer, I get the above message. I don't know what the
program is that this message is referring to in order to remove it and add it
back.
I would appreciate it if you could direct me in the right direction.
Thank you in advance. Sheila Wilkes
--
http://cozyhomejewelrystore.com Tag: When I open up Live Communications Server Admin Console??? Tag: 1917491
Marc Jacobs Quilted Leather Wallet Coffee - www.luxury-gift.org
Marc Jacobs Quilted Leather Wallet Coffee - www.luxury-gift.org
Luxury Gift : http://www.luxury-gift.org
MARC JACOBS handbags : http://www.luxury-gift.org/Handbags/MARC-JACOBS.html
Marc Jacobs Quilted Leather Wallet Coffee Link :
http://www.luxury-gift.org/Handbags/Handbags-6701.html
Marc Jacobs Quilted Leather Wallet Coffee Information :
Brand : MARC JACOBS handbags
Code :
Description :
- Marc Jacobs Quilted Wallet in Cream Leather- Two padlock-clasp flap
pockets on the exterior with MARC JACOBS inscribed- Polished bronze
hardware- Six credit card slots, two large pockets for currency or
receipts, and two large open compartmentsMade in ItalySize: 7.75" x 4"
x 1" (W18 x H10 x D02 CM)This wallet comes with: Marc Jacobs tag/card,
and Marc Jacobs dust bag.
Marc Jacobs Quilted Leather Wallet Coffee Link :
http://www.luxury-gift.org/Watches/Handbags-6701.html Tag: When I open up Live Communications Server Admin Console??? Tag: 1917486
Memory/CPU usage of explorer.exe
I have an external hard drive connected to my desktop computer (Compaq
Presario running Windows XP Home edition). Lately, when I try to open the
drive in Windows explorer, my computer has been freezing up. I am unable to
open files stored on the external drive, or use other programs until I close
the drive with Task Manager. T.M. says the drive is not responding, CPU
usage shoots up to 100% and stays there, and memory usage for explorer.exe
often reaches 40,000-45,000KB. I have run two separate virus/malware removal
programs trying to find something that might be hijacking the CPU/memory
usage, but both have come up clean. The drive's manufacturer has no
solutions other than "something's in there". Does anyone know what could be
causing this issue and how I can resolve it? Tag: When I open up Live Communications Server Admin Console??? Tag: 1917475
Windows Search Setup
I was cleaning out a few unused processes on my computer and I think I may
have stopped something from running which makes the windows search feature
work. I tried to re-install it but as a do i get an error saying:
"Setup has failed. Make sue terminal Services are enabled before re-running
setup"
now everything I can find says that terminal Services is for remote desktop
access, so why would this need to be enabled to install a search program and
where would you find it to enable/disable it anyway?
Please help. Tag: When I open up Live Communications Server Admin Console??? Tag: 1917469
Missing boot file:ntosknl.exe
Missing boot file:
I was reading about the missing ntoskrnl.exe file and I have the same
problem with my desktop computer.
This is the problem:
No safe mode is accessable or previous well last boot available. All say the
same about missing ntosknl.exe
I tried the R console and could not pass the "enter the administration
password" since the xp pro OS was installed by the previous owner I don't
have a clue of it. I pulled the HD and plugged it in as -slave in my other
comp.; I can browse it and see all files, but I have little or no knowlegde
of how to replace or repare the missing file in question. Nor do I know if
it's possible to do through this method.
I wish I could retain those programs and files in that HD.
Any help in this matter will be greatly appreciated. thank you all. Tag: When I open up Live Communications Server Admin Console??? Tag: 1917468
Can any type of cleanup be done after installing Windows XP SP3?
This is a multi-part message in MIME format.
------=_NextPart_000_0032_01C8DAFE.50D42D50
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
I installed Windows XP Service Pack 3 (SP3) back on May 10, 2008. I was =
hoping that this installation process would automatically remove all of =
the "C:\WINDOWS\$NtUninstallKB------$" and a few other Uninstall Folders =
that were applied during the life of the previous Windows XP Service =
Pack 2 (SP2), and which have now become obsolete with Windows XP Service =
Pack 3 (SP3). Unfortunately, this did not happen. I vaguely recall =
that when I installed Windows XP Service Pack 2 (SP2) back in August, =
2004, all of the then previous Uninstall Folders were automatically =
deleted.
As an extreme example, I did a search for urlmon.dll, which has been =
frequently updated with Microsoft security fixes during the last four =
years. I came up with a total of 36 copies of urlmon.dll on my =
computer, most of which are in the above type of =
"C:\WINDOWS\$NtUninstallKB------$" and a few other Uninstall Folders. =
In addition, I found both urlmon(3).dll and urlmon(4).dll (with the same =
size and version number) in C:\WINDOWS\System32. =20
In fact, it appears that a very large number of DLLs in =
C:\WINDOWS\System32 now have two duplicate copies of the previous =
version of each DLL that was replaced with a new DLL by Windows XP =
Service Pack 3 (SP3). Most of these previous version DLLs have the =
numbers (3) and (4) after them. However, some of these previous version =
DLLS have the numbers (2) and (3) after them like usbmon(2).dll and =
usbmon(3).dll.
I believe that some substantial cleanup is needed after installing =
Windows XP Service Pack 3 (SP3). Is there any automatic cleanup utility =
that I can run? If not, then can anyone inform me what I can safely =
delete from all of this mess that has resulted in multiple copies of =
most DLLs? Can I safely delete all DLLs with numbers after them like =
the above examples in C:\WINDOWS\System32? I will greatly appreciate =
any assistance or other information in this matter. =20
Richard A. Landkamer
------=_NextPart_000_0032_01C8DAFE.50D42D50
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.6000.16674" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV>I installed Windows XP Service Pack 3 (SP3) back on May 10, =
2008. I=20
was hoping that this installation process would automatically remove all =
of=20
the "C:\WINDOWS\$NtUninstallKB------$" and a few other=20
Uninstall Folders that were applied during the life of the previous =
Windows=20
XP Service Pack 2 (SP2), and which have now become =
obsolete with=20
Windows XP Service Pack 3 (SP3). Unfortunately, this did not=20
happen. I vaguely recall that when I installed Windows =
XP Service=20
Pack 2 (SP2) back in August, 2004, all of the then previous=20
Uninstall Folders were automatically deleted.</DIV>
<DIV> </DIV>
<DIV>As an extreme example, I did a search for urlmon.dll, which =
has been=20
frequently updated with Microsoft security fixes during the last four=20
years. I came up with a total of 36 copies of urlmon.dll =
on my=20
computer, most of which are in the above type of=20
"C:\WINDOWS\$NtUninstallKB------$" and a few other Uninstall =
Folders. =20
In addition, I found both urlmon(3).dll and urlmon(4).dll (with the=20
same size and version =
number) in C:\WINDOWS\System32. =20
</DIV>
<DIV> </DIV>
<DIV>In fact, it appears that a very large number=20
of DLLs in C:\WINDOWS\System32 now have two =
duplicate=20
copies of the previous version of each DLL that was replaced =
with a=20
new DLL by Windows XP Service Pack 3 (SP3). Most of these =
previous=20
version DLLs have the numbers (3) and (4) after them. =
However, some=20
of these previous version DLLS have the numbers (2) and (3) after them =
like=20
usbmon(2).dll and usbmon(3).dll.</DIV>
<DIV> </DIV>
<DIV>I believe that some substantial cleanup is needed after installing =
Windows=20
XP Service Pack 3 (SP3). Is there any automatic cleanup =
utility that=20
I can run? If not, then can anyone inform me what I can safely =
delete from=20
all of this mess that has resulted in multiple copies of most=20
DLLs? Can I safely delete all DLLs with numbers after them =
like the=20
above examples in C:\WINDOWS\System32? I will greatly =
appreciate=20
any assistance or other information in this matter. =20
</DIV>
<DIV> </DIV>
<DIV>Richard A. Landkamer</DIV></BODY></HTML>
------=_NextPart_000_0032_01C8DAFE.50D42D50-- Tag: When I open up Live Communications Server Admin Console??? Tag: 1917467
email getting automatically deleted
using imap with email server so that email can be dumped to desktop and
laptop. using laptop with outlook express. on laptop when email comes in,
it gets a slash through it (deleted) and when exiting outlook the emails are
purged. email can be read but can't be kept on laptop unless each is
selected and undeleted Tag: When I open up Live Communications Server Admin Console??? Tag: 1917465
Linksys tech support live chat transcript - enjoy!!!!
I had a PC come across my desk that had Linksys drivers for a WUSB54G
installed - but the install somehow failed. If you tried to uninstall the
Linksys app pops up and fails to uninstall saying that some file (it doesn;t
say which) is missing and the uninstall aborts. If you try and re-install,
it says you can't reinstall until you untinstall. This would not be a
problem except that the Linksys software is interfering with another adapter
also that I tried to install to get away from Linksys hell.
I even deleted all WUSB* from the Windows directories and all WUSB* registry
entries that I could. The uninstall and reinstall both still fail.
Frustrated as hell (isn't that how we all are when we contact technical
support?) I went online to get some help from Linksys, and this is what I
got.
--------------------------------------------------------------------------------------
Sunmay Jagtap (40437): Hi, my name is Sunmay Jagtap (40437). How may I help
you?
Jim: I have a WUSB54G v1 that I installed - something went wrong with the
install and I tried to uninstall - it then said a file was missing and
aborted the uninstall - when I try and reinstall it says I have to uninstall
first - what the hell?
Sunmay Jagtap (40437): I can understand your concern's. May I please know
the model number and version number with the serial number ( S/N no ) of all
the linksys product you are using .
Jim: I don't have it - I left work already - its at work - do you mean to
tell me that you don;t have a simple uninstall for your products?
Sunmay Jagtap (40437): Well, if you uninstall it from the all program or
add or remove program , it should get uninstalled .
Jim: ARE YOU READING THI+
Jim: THIS
Jim: PAY ATTENTION
Jim: If I try and unsinstall it says there is a missing file
Jim: If I try and re-install to replace whatever file is missing it says I
have to uninstall first
Sunmay Jagtap (40437): That's the only option to have it uninstalled . If
you are not able to do that , you can get back to us from the work place ,
so that we can try to troubleshoot that adapter .
Jim: But I CANT FKING UNINSTALL because the file is missing
Jim: I WILL NEVER EVER BUY ANOTHE LINKSYS PRODUCT
Sunmay Jagtap (40437): Do you know the file name you were missing ?
Jim: NO - your beautiful software sdoesn;t tell me what file is missing
Sunmay Jagtap (40437): It seem's you are very frustrated , I do understand.
Please let me know if you are not having that adapter with you as of now,
how I could help.
Sunmay Jagtap (40437): I am there to resolve your issue , however there
might be many reasons , behind it as it is not getting uninstalled .
Jim: You must have a simple uninstall app that cleans a system of all
Linksys WUSB files....Norton has stuff like that for their products. I
really dont get why you would put out an uninstall that will not uninstall
if a file is missing - WHY DOES THAT MATER? Youre uninstalling it
Sunmay Jagtap (40437): It will be very difficulty for me to assume the error
and resolve it or give you a proper resolution on it .
Jim: Why?
Sunmay Jagtap (40437): If the operating system is not giving you any
resources to uninstall it like a .sys file is corrupted or missing , you
can face this issue .
Jim: Its not the OS!!!! YOUR SOFTWARE UNINSTALL APPLICATION FAILS saying a
file is missing and it does not tell me what file is missing\
Sunmay Jagtap (40437): If you fill that the Uninstall wizard on the adapter
CD is not working , you can try it in some other computer . I am sure you
should get to a proper conclusion .
Jim: Then, as if that wasn't stupid enough, your software will not
re-install without uninstalling - which your software won;t do because some
phantom file is missing that it will not tell me what file that is....
Jim: They'll love reading this in the newsgroups.....
Sunmay Jagtap (40437): It also happen's that the software even after
uninstalling , remain's in your registry , so you might need to clean up
from that registry .
Jim: So your software doesn't clean up its own mess?
Jim: If your software puts in a registry entry, when it is removed (WHICH I
CANNOT DO) it should remove ALL registry entries
Sunmay Jagtap (40437): Well, registry belong's to your operating system not
any device .
Jim: YOUR SOFTWARE WROTE TO IT IT CAN DAMN WELL CLEAN UP AFTER ITSELF
Jim: Unless your coders arent that bright
Sunmay Jagtap (40437): Is the adapter more than 3 years old or less than
that ?
Jim: Less
Sunmay Jagtap (40437): You can try to download the latest driver's for your
adapter and in that you will get the setup wizard as well, you can try to
use the new one .
Jim: You have to be the worst rep ever!!!! I have told you time and time
again that the software install fails because it says it is missing a file
and you can't overwrite it with another install because it makes you try to
uninstall first - WHICH I CANT FUCKING DO!
Sunmay Jagtap (40437): I appreciate you high technical skill you are
possessing , and getting to a conclusion that it is the software issue.
Being I a technical representative , I am afraid I will not be able to
assume thing's and give you a solution as they will be improper and wrong
on my part .
Jim: Really? Well, I am not as technically proficient as you. I only
taight my first programming class 25 years ago. I only own a small computer
company and I only write programs for attorneys and banking institutions.
Sp forgive me if I fail to see how you can screw up an installation so
completely that it will neither install OR uninstall.
Jim: I'm off to post this in the newsgroups - maybe I can save other
unsuspecting people from Linksys hell.....
Sunmay Jagtap (40437): That's great! to know you are doing very well on your
part . However , you do not have any product detail's and the device with
you , so it will not be possible for me to have it troubleshooted . Please
let me know if you have any option's or what resolution should you like from
my end , that can help you to resolve this issue ?
Jim: It is a WUSB54G version 1. I fail to see why a serial number is needed
when you know the model and version of the product. I also fail to see how
programmers could be so stupid as to code an app that will not uninstall
because it is missing a file that will be deleted anyway during the
uninatall AND to also fail to allow the reinstallation of the application -
forcing an unistall which is not possible due to a missing file - which they
are also too dimwitted to give you any clue as to the name of the missing
file so that it could be replaced. You'd never make it a week at my company.
Sunmay Jagtap (40437): I will suggest you to try to install and install the
adapter in some other computer . If you face the same issue even with some
other computer , you can have the adapter replaced as per the warranty
status from our end , if your adapter is in warranty .
Jim: Why would I screw up a second PC with your software when you can't tell
me how to get it off the first one? You must be out of your mind.
Sunmay Jagtap (40437): On what basic should I assume that it is the software
and not the computer or the registry or the OS?
Jim: When your software will not uninstall because it is missing a file and
it does not say what that ffile is - that is a problem with your software.
Jim: When your software will not overwrite the old install and forces an
uninstall - that is a problem with your software coded by your coders.
Sunmay Jagtap (40437): Well, what un installation Wizard does it use while
uninstalling it ?
Jim: Yours.
Sunmay Jagtap (40437): Are you using windows xp on that adapter computer or
any other operating system ?
Jim: XP Home
Sunmay Jagtap (40437): Have you tried to uninstall the adapter from the
device manager ?
Jim: The device was unplugged. It did not show in the device manager.
Sunmay Jagtap (40437): So have you tried uninstalling the software when the
device is plugged in ?
Jim: No. Is that where it keeps this phantom missing file?
Jim: And why would it delete a file from teh device to unistall from my pc?
Sunmay Jagtap (40437): Well, that might be the case . If the device is not
there in the computer , how can the software get un installed if that
software is not
in use , as it will not respond properly .
Jim: Because the damned files are still on the hard drive. Without the
device pugged in, they should have no reason to be in use and could easily
be deleted - IF your coders knew what the hell they were doing.
Sunmay Jagtap (40437): When you install the linksys software , does it ask
you in between the installation to plug the adapter In ?
Jim: I didn't install the adapter.
Jim: The device does not have to be plugged in to uninstall - at least not
with uninstall software that works.
Sunmay Jagtap (40437): So if the adapter is not installed properly using the
software , I am sure, there might be some issue uninstalling it . Linksys
software needs to be plugged the adapter in the computer in between the
installation and un installation .
Jim: That does not explain why I cannot uninstall the damned software, tell
me what file is missing that prevents me from uninstalling nor does it tell
me why I can't reinstall the software without uninstalling it first which _
and I may have mentioned this before -- I CANT FUCKING DO!!!!
Sunmay Jagtap (40437): Please click on the link below :
URL Received: http://kb.linksys.com/3847
Sunmay Jagtap (40437): Also in windows xp you do not need the linksys
software as linksys has a built in wireless utility called as easy link
advisor .
Jim: How the hell does a link teeling me how to install the device help this
situation?.
Jim: Have fun explaining this little conversation.....if I wanted to waste
my time, I wouldn't waste it with Linksys.
Sunmay Jagtap (40437): If the software can be loaded as you assume without
plugging the adapter , then it should get uninstalled as well , correct?
Jim: What?
Jim: I never said it could be loaded without the adapter!
Jim: Damned off-shore help desks.....
--------------------------------------------------------------------------------------
Have a great day! And smile......after all, we don't *have* to use Linksys,
do we?
Jim Tag: When I open up Live Communications Server Admin Console??? Tag: 1917463
Blue Screen and Windows Startup Problem
I was lowering the voltage on my processor (not a lot) using my ASUS A
Overclocking program which came with my motherboard, and I suddenly go
a blue screen. When I tried restarting my computer Windows XP wouldn'
load. I get to the point immediately before the windows icon and loadin
bar show up, and the screen indefinitely remains black.
In an attempt to fix the issue I was going to use my Windows XP CD'
repair feature, but as soon as all the "Setup is Loading...." stuff end
I get a blue screen. It says: IRQL_NOT_LESS_OR_EQUAL" and the stop cod
is: 0x0000000A (0x000000820, 0x00000003, 0x00000001, 0x80809e19)
Does anyone know what the problem is, or how to fix it Tag: When I open up Live Communications Server Admin Console??? Tag: 1917462
windows validation
I bought a used Dell computer with windows xp prof. already installed. I am
getting a message that windows couldn't pass validation process, then I am
asked to save a file wgaplugininstall.exe which I canceled because I don't
know what to do. thanks a lot for any help. Tag: When I open up Live Communications Server Admin Console??? Tag: 1917452
Sound....
I know this isn't a Windows issue,
I bought some Speakers surround sound, and a subwoofer....
i've had some hooked up to my PC before...
this has three cables to go into the sound card and i hooked them up
but only the ones hooked into output work, not ones hooked into c/
subwoofer, or sside or rear... i ahve an HP a1220n pavillion with the
onboard card...
the last ones i had, had an adapter that the 3 cables plugged into
this adapter that would put them all into the output, i was wondering
do i need to get one of these or what? Tag: When I open up Live Communications Server Admin Console??? Tag: 1917450
Desktop and Web items
I have an issue where, any item selected from WEB under DESKTOP, doesn't show
on my desktop at all. Normal wallpaper shows fine, but not these items.
I'm using Windows XP SP2
Any ideas? Tag: When I open up Live Communications Server Admin Console??? Tag: 1917437
Saving log-in at different web sites
Hi, I have Windows XP and am having trouble at several websites where they
ask for userid and password. It is not being saved so I assume I have a box
somewhere that I need to check or uncheck. Any help would be greatly
appreciated.
Thanks,
--
Michael W. Tag: When I open up Live Communications Server Admin Console??? Tag: 1917436
A Lot fo Indetities
Win XP Home SP3
In Documents and Settings under Application Data and Local Settings, I have
about two dozen different Identities. Some show a modification date back to
2004. The ones in Local Setting have only a Microsoft folder. The ones in
Application Data show as empty folders
Do I need to have all these things? If not, how do I determine which I can
delete?
Thank you very much. Tag: When I open up Live Communications Server Admin Console??? Tag: 1917433
MICROSOFT RUNTIME LIBRARY ERROR- ABNORMAL PROGRAM TERMNATION
I am getting soooooo frustrated ! I am trying to download software from a cd
to run my mp3 player. it gets halfway through downloadinf when i get....
microsoft visual c++ runtime library
error
program: C:\document~1\rac\locals~1\Temp\_is2F.exe
--
THX BUNCHES Tag: When I open up Live Communications Server Admin Console??? Tag: 1917430
Miniscule fonts
I have XP SP3 on a Dell, with Office 2007 Student and Home, and IE7. I can
right click on Desktop/Properties to get the Display Properties, from where
I can manipulate the specified font and font sizes to my satisfaction, which
I have done. However, none of this seems to have any effect on the
minuscule font sizes that appear elsewhere and over which, for the life of
me, I cannot see how I have any control. For example, the Display
Properties box has tiny font sizes, say size 4, Start/Favourites come up in
a tiny size, likewise Start/All Programs. Weird. Start on its own comes up
in big fonts. I can read the tiny fonts, but they why this behaviour and
how can I adjust these? They are driving me mad? Tag: When I open up Live Communications Server Admin Console??? Tag: 1917416
CryptnetUrlCache
Hello.
I have a user that has a roaming profile with maximum amount of 20mb or
Profile space (controlled via GPO) however her profile continues to be
exceeded due to some files that keep growing in her folder located
C:\Documents and Settings\mjimene\Application
Data\Microsoft\CryptnetUrlCache\Content. I have to continually go in and
delte the contents of this folder.
Do you know what this folder is for or do you know how I can fix this problem?
Thanks.
Iram Tag: When I open up Live Communications Server Admin Console??? Tag: 1917409
Microsoft Security Bulletin Revision
The revision I am referring to is MS07-042-CRITICAL. When I download the
appropriate version before installation I am asked whether I want to modify,
repair or remove the item in question. I am stumped as to what selection to
make so any help would be appreciated so I do not make the wrong choice.
Thank you in advance for your help. Tag: When I open up Live Communications Server Admin Console??? Tag: 1917402
Remote Desktop Question...
Hi Guys,
I'm not even sure if this is possible with Win XP.
When i remote into my home PC, who ever is logged in gets kicked off/logged
out. Is there anyway for me to set it up so that when i log it they can see
my every move? Like VNC.... if anyone knows what that is?
Hope this makes sense.
Many Thanks
Steve Tag: When I open up Live Communications Server Admin Console??? Tag: 1917395
Sager Elantech touchpad, blaming XP,can't use program
I have a Sager 5750 that has an Elantech touch pad, I have tried Elantech
website, but support is not available in English. Sager claims it is a
conflict with Xp,
Removed mouse driver completely, through safed mod and regular. XP installed
ps/2 driver, then installed ELantech driver, still does not work.
No other pointing device is installed (removed Logitech wireless mouse to do
above)
Sage claims that XP will not let elantech driver to be installed, looked at
driver of touchpad and it lists many ktp (elantech) drivers and xp drivers.
tried to update driver using elantech file, does not see a driver there.
I downloaded the Elantech/KTP driver from Sager website b/c Elantech does
not have support/drivers avialalbe.
thanks Tag: When I open up Live Communications Server Admin Console??? Tag: 1917394
Cursor jumps to notification area
Hi,
whenever I plug in my external WD HD the mouse cursor will jump into the
notification area and click on random icons. This problem has only recently
started to occur. After the problem appeared I suspected a problem with the
usb drivers which I then un- and reinstalled. Next I reinstalled the mouse
drivers, then I messed with the settings for the mouse and lastely I updated
to SP3. I also checked for viruses and such.
This problem occurs w/ and w/o the optical Logitech mouse plugged in.
HP TC4200 Tablet, XP Pro SP3
Right now I don't know what else to do, can anyone help me here?
Thank you Tag: When I open up Live Communications Server Admin Console??? Tag: 1917373
Restore the Task bar
Hi
I have XP Pro, for some reason my Task bar has doubled in size and has a
second "Quick Launch" section which has an inoperative shortcut that cannot
be deleted.
Is there a way to get my Task bar back to normal.
Thanks Tag: When I open up Live Communications Server Admin Console??? Tag: 1917365
XP Logging on then immediately logging off
I have an HP Pavillion desktop w/ XP (don't know if it's Home or Pro) that
logs off as soon as it logs on. I get welcome screen, logon screen, desktop
wallpaper, then logoff. This happens with the only account on the machine,
the same account in safe mode and the admin account in safe mode. My
research points to a corrupt userinit.exe file in Windows\system32. I
removed the HDD to another computer and replaced the userinit.exe file with
a known good one, then returned the drive to its host machine, but no
change. Further research suggests that a registry key may still point to a
wrong userinit.exe file or wrong path, and I would like to check the
registry to see if this is true. The key is supposed to be:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\
The value is supposed to be (on a machine with Windows installed to C):
C:\WINDOWS\system32\userinit.exe,
This computer is not on my network, so I can't connect to it's registry via
the network. I've booted into recovery console and it asks me to choose
between these two installs:
1. H:\MiniNT
2. H:\I386
I am confused by this because I think there is usually a C:\Windows option
here, or in this case, an H:\Windows. Looking at this drive's folder
structure on another computer, it has a G:\ drive and an H:\ drive. The H
drive has a Windows folder with an I386 folder inside that. The G drive I
believe is the recovery partition and has the MiniNT folder and an I386
folder at it's root. No Windows folder.
I don't know which installation to select and I don't know what commands to
enter to open or check the registry values to see if the key is correct. The
HP recovery utility says that I will have to reinstall all apps that didn't
come with the machine if I use it and I'd like to avoid that. Can anyone
help?
Many thanks,
Rip Tag: When I open up Live Communications Server Admin Console??? Tag: 1917363
Extremely low DVD sound (Media player)
Hia folks
I'm trying to set up PCs and laptops to read DVDs using the Media
Player. Video (and menus, etc) come out ok, but the sound is allways
so low I can barelly hear anything. Even with both sound levels at max
(windows and speaker knob) it's not even a whisper...
I've tried 2 movies on 1 PC and 1 laptop, diferent brands. They are
both on Windows XP Pro. The only thing I can think of is a possible
problem with the codec pack the original installer used... any
thoughts? Tag: When I open up Live Communications Server Admin Console??? Tag: 1917346
Illustrator keys mapping to different characters
I have a co-worker using Adobe Illustrator CS3 on a Windows XP Pro PC.
Starting last week he's noticed in Illustrator and ONLY Illustrator
whatever keys he presses provides the wrong characters. Like "A"
actually produces a "Q", etc.
He's tried reinstalling the program, but no change.
Any ideas what this could be??
Thanks,
Liam Tag: When I open up Live Communications Server Admin Console??? Tag: 1917344
windows xp home edition
i have had disk failure. bought a new disck and am trying to load win xp
onto the the clean new disk. everything seems to go smoothly until it tries
to reboot at which point it takes me back to the install screen with the
message to 1. install, 2 repair, or 3 quit. if i take out the cd and reboot
it does not find the disk. does not boot and tells me it has no disk. Tag: When I open up Live Communications Server Admin Console??? Tag: 1917341
Windows updates wreck display settings
Everytime I download the latest windows update my display settings go to
default: the display sets to the lowest resolution and all of my icons move
from their original position. It is as if the computer boots into safe mode,
(but the display does not indicate that specifically)
I have tried saving the desktop theme to no avail.
Each time I must reset all of the font sizes, re-arrange the icons and reset
the resolution. sometimes I must reboot 4 of 5 times to get it back to
normal. - if I simply reboot under normal conditions, this problem does not
occur.
What is causing this? Tag: When I open up Live Communications Server Admin Console??? Tag: 1917331
XP can't load personal settings, logs in as temp, fix eats all my
I'm running XP Media Center Ed. circa 2002 on an HP Pavillion, if that
matters. I'm afraid I can only describe my problems symptomatically, as I
don't have any technical knowledge on software.
My computer was fine, but a few days ago I booted it up only to have it
"loading personal settings" for a long time. It eventually logged me in, but
I found that my desktop picture (and all other personal settings) were gone
and my desktop was cluttered with, not my files, but Vongo, AOL free trial,
and a slew of other icons, possibly the same ones the computer started with,
but I'm not sure. What's weirder is that clicking "My Documents" only had My
Pictures, Videos, and Music in it, but they were empty except for the
samples. I checked my hard drive usage and all of my docs were still in
there, I eventually was able to access them by following the trail of icons
from My Computer. Other problems I encountered were that each time I
rebooted, Firefox would behave like I had never run it before and my Cookies
would be gone, but anything I downloaded to the Desktop would stay there. A
few times while logging in I got an error messages saying that I would be
logged in as a Temp user, but it appeared to log me in under my own username
anyway. Needless to say, I backed up all of my documents before doing
anything else. I tried a System Restore and was promptly told that nothing
had changed to restore.
My stepfather is a lot more computer-savvy than I am, and he tried to fix
it. He followed this advice:
http://www.computing.net/answers/windows-xp/xp-hangs-in-loading-your-personal-/148106.html
and I confess I have very little idea of what all that does. It helped
though; I can log in normally, retain Appearance settings, and keep cookies
from start to start. We also rearranged my files with cut and paste so My
Documents would actually have my documents in it, and went through /misconfig
to clean up my start-up. And boy, am I glad I backed everything up. Upon
restart my hard drive was twenty gigs lighter and My Documents is stark and
empty again.
I'm using said computer right now, and other than some brief hang-ups it
works. No scanner program or comparing it to my sister's identical, fully
functional computer shows anything wrong with it. Unfortunately it's also
eating my documents.
One help thread I looked in suggested reinstalling Windows completely and
wiping my hard drive clean. Really, I would love to. Unfortunately I've moved
a bunch recently and can't find my WXP CD for this computer, and from what
I've read Dell ones won't do the same thing. Is there anything else I can do
to sterilize and reset this machine without screwing it up? Tag: When I open up Live Communications Server Admin Console??? Tag: 1917330
During the SP3 Upgrade
Is there anything else installed or upgraded ? I assume No IE or OLE.
Fred Tag: When I open up Live Communications Server Admin Console??? Tag: 1917319
Router problems Linksys
I have a 8 port Linksys router that works fine with three existing
computers. I decided to add a fourth which was a new Dell with Windows
XP home. This computer is accessible through the shared folders on the
networks but can not access the internet unless you unplug the router
and plug it back in. This works without fail until you get off the
internet and try to get back on. Then you have to unplug again. This
router is located approximately 60 feet away and requires stair climbing
to access router which tires me out.
1. Computer is accessible through shared folder without unplugging router.
2. Have tried different jacks on router, same results.
4. Tried jacks that other computers works on, same results.
3. Three other computers work fine on this same router.
4. Checked cable and even laid out a cable on the floor to upstairs with
same result.
Any other ideas?
Thanks Tag: When I open up Live Communications Server Admin Console??? Tag: 1917314
The Console tree on the Left hand side does not show up??