Remote access

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Swap o/s back to XP ? Hi all, I recently bought a new laptop, loaded with Vista. It highjacked my home wireless network It is doing my head in !! Want to swap back to XP Is it easy to do ? Tag: Remote access Tag: 1934699
  - 2
    - Where is SP3? I have Auto-update set for "Notify me but let me choose when to download." A month or so ago, SP3 was offered and I didn't dl it right away, just left the shield sitting there. About two weeks ago, I decided I had the time to install it so I clicked on the "Download." The shield went away and I assumed the update would be available for installation shortly. But two weeks later it still hasn't shown up. Is it normal for the SP3 update to take so long to download? Reply-to address is real John Tag: Remote access Tag: 1934698
  - 3
    - just after instalation of Windows Xp - disk size : 238M, used : 11 Yesterday, I installed Windows Xp and in a "partition dialog" in setup it has been displayed : C:\ size(238M)/used(115M). After that, the installation format my disk, but only in not used space (size - used). So after installation, on absolutely empty computer (only the programs and drivers installed with Windows) in the Properties of C: there are : used space 115M, Capacity 238M. What can I do? Tag: Remote access Tag: 1934693
  - 4
    - Error constantly showing on start up Hi. New to all this so excuse me if I have done something wrong ! I constantly get the following message and do not understand it. Can someone help please. C\WINDOWS\TEMP\LUProdRg.exe cannot be found. Thanks Tag: Remote access Tag: 1934680
  - 5
    - Hard Drive activity Is it normal for the hard drive to be constantly active? While looking at a web page, without clicking any links, I notice that the hard drive light is continually flashing. I also noticed that the CPU usage went as high as 50% when I was simply viewing a web page. What might be the cause of this? I ran a virus scan with NOD 32 and it came up empty. Tag: Remote access Tag: 1934679
  - 6
    - windows will not boot, and now will not install Ok bear with me as I try to explain this. -There was a power outage in my area and my computer restarted. After restarting it would hang at the Windows loading screen with the blue bar, and it would stay like that forever. -I went into safe mode which works fine and tried a system restore to an earlier date, and still wouldn't load. -Went back into safe mode and it said Restoration Complete. Ran msconfig to do a diagnostic boot...still no luck. -Ran chkdsk /r using Recovery Console, said it fixed the errors but still hangs at the same screen. Ran Samsung HD utility and detected ECC errors. -Tried to do a Repair Windows installation using an original Windows cd, so it was SP1 when I had SP2. I tried a Windows XP Pro SP2 cd but there was no repair option so I went to my original, which was Home. -Through the install there was a few errors such as COM+, directdb.dll, inetcomm.dll,msoe.dll and wab32.dll. I clicked okay with all of them and installation completed fine. -After restarting, loading would be REALLY slow, and actually wouldn't go past the wallpaper. I checked task manager and explorer.exe isn't even there. -Went into safe mode, which was super slow as well, and same thing with the no icons. Ran safe mode with Command prompt and opened system restore, only to find no restore points. -Got my hands on a Sp3 Windows Home cd, and got it to the Installing files screen where it shows a Do you wish to install this non verified SoundMAX HD audio driver, and it freezes. It said this when I first did the Repair install but I could get past it, this time my mouse/keyboard freezes up. I am now at a loss as to what I should do other than formatting. Any help guys? Thanks Tag: Remote access Tag: 1934676
  - 7
    - Windows Messenger link under IE 6 Hi there, Does anyone know that why there is a sudden Windows Messenger link in my Internet Explorer 6 Tools menu. I have not installed Windows Messenger in that machine. Does it related to Windows XP SP3 or hotfix? And how to hide this? Please advise? Thanks Ivan Tag: Remote access Tag: 1934673
  - 8
    - good backup/imaging software? Looking to do a one-time hard-drive image for back-up. Not something that continually monitors changes, but something I can run whenever I feel the need to perform a backup to save to a DVD and load in the event of a system crash. Preferably free (if anything is available). I've bought a computer with three recovery CDs I can use to restore the computer to the state in which I bought it, but I have made so many changes since then, I would like to make a new recovery disc (DVD preferably). The CDs I have load Norton Ghost in a DOS environment. From there, I can choose to load from image to disc (I think is the option). Can I use this same app to backup and create a new and more current image? Thanks in advance for any help in this (I know very little about backup and recovery software). Tag: Remote access Tag: 1934659
  - 9
    - burning files on cd question. http://www.nerd-out.com/darrenk/1500/1500_firmware.htm The above site gives information on how to burn a file on a cd. It says(in the middle of the page) "Burn U1500AM.ROM to a blank CD-R/CD-RW. Be sure to apply these specifications before burning the disc: Data CD, ISO9660, Mode 1, "Close"/"Finalize" disc session. " How do you apply the specifications: "Data CD, ISO9660, Mode 1, "Close"/"Finalize" disc session" to the cd when I burn files on it??? The article also says the cd file must be exactly 524,288 bytes. I burned the file without the specifications and it was only 421,888 bytes. Is it because the specifications were not applied? How do I apply the specifications? Thank you in advance. Tag: Remote access Tag: 1934642
  - 10
    - Fragmentation of large video file OS=Windows XP Pro SP2 I downloaded a 1 hour video, file dn008.0318.mp4 from democracynow.com using the video player Miro.exe. The 451,294 KB, file had 6,264 fragments. When I use this process I typically get this degree of high fragmentation. Q1 - Is such high fragmentation to be expected with video files? Or does this indicate that I have a problem? Windows defrag couldn't defrag it (or several other video files.) Piniform defraggler showed 3 fragments after Defragging it. Information will be appreciated, Stan Hilliard Tag: Remote access Tag: 1934641
  - 11
    - IE: can't change home page from MSN.com Win XP, IE. Neighbor can't change from default msn.com home page to Comcast.net home page. I confirmed the problem.....IE tools, options, changed to www.comcast.net, apply, ok. IE automatically changes back to msn.com the next time IE is opened. would appreciate suggestions. tia. Tag: Remote access Tag: 1934637
  - 12
    - Microsoft Optional Hardware (Optional) Update Recently, I selected the update, "SIS-Display-SIS 741", from the subject site and restarted my computer, running WindowsXP Home. At the end of the reboot, a pop-up titled "keyhook.exe - Entry Point Not Found". The enclosed text read: RealKeySting@CSISReg@SAHPAD0H0PAUHKEY__@@K@Z could not be located in the dynamic link library SISBase.dll. Microsoft's Download History indicated the update completed, I found "SIS-Display-SIS 741 in the Device Manager and diabled it. The pop-up error message repeated for several reboots. Finally, I enabled, SIS-Display-SIS 741. A search indicated Keyhook.exe" was located at C:\WINDOWS\system32. It was not readily available during a physical check, which is a little confusing. The only other thing I can think of is to see if I can get, keyhook.exe, off the internet and install it. However I'm not familiar with whether I can get it or where to put it. I could use a lot of help on this, please. Tag: Remote access Tag: 1934635
  - 13
    - KB936929 I have the shield by my clock which says "updates are ready for your computer". Clicked on it and eventually it said it was for SP3. I canceled out all the panels and now I still have the shield saying I have updates. I'd rather not have SP3 (had d/ld a few months ago and was lucky in that it found errors and didn't take), so how can I get rid of this shield? Tag: Remote access Tag: 1934634
  - 14
    - Manually Removing Certain Registry Key Types What are the possible consequences of manually removing the following type of registry key: hkey_local_machine \software\microsoft\windows\currentversion\internet settings\zonemap\domains\ (website) If my understanding is correct, the values of this key will set the security/privacy settings of the IE browser for the specified website. For the case of malware, the malware would create this key and set the security level to "Trusted" for the website. It would then direct the browser to the website and run more malicious code from that site. Using REGEDIT, I looked to see how many keys I had of this type and found a huge amount. I estimate about 500. None of the websites are those that I visit regularly, or maybe never visited at all. A lot of them seem to have foreign domains. I want to get rid of them. It seems like the registry saves everything. There is also the potential embarrassment factor. A worst case scenario is that a computer savy girlfriend inspects my registry and demands to know why I have a key from moscowwhores.com. I don't remember ever visiting this site and it's not really the way I roll. These keys have two parameters: REG_SZ (value not set) and REG_DWORD = 0x00000004 (4) Can anyone tell me what these values mean? What could go wrong if I engage in mass deletement of these type of keys. Thanks Scott Los Angeles Tag: Remote access Tag: 1934632
  - 15
    - can't transfer animation file to website files I have a webpage that was created for me that contains animation. I want to transfer this webpage to my website files on the internet. I have this file stored on my computer in the MY Documents section. Everytime I open this file on my computer the animation is blocked and I have to right click the script and active x warning bar that pops up and click allow. I need to transfer this file to my website files, but when I do, the animation does not come with it. How can I stop internet explorer from blocking the animation so that I can transfer the COMPLETE file to my website files? The animation company made the program on a MAC if that will help you. My OS is WINDOWS XP HOME EDITION My browser is now Internet Explorer 6 because I uninstalled Internet Explorer 7 thinking that would help, but it didn't. I need this done now, but none of ther help sections show how to do it. So what do I do? Completely shut down all security just to transfer that one file? And if so ...how do I do it? I have tried using FTP, but the same thing happens. The words transfer, but not any of the animation, yet if functions perfectly on my PC (as long as I right click that stupid allow active content bar. -- Tony G. Tag: Remote access Tag: 1934624
  - 16
    - Windows could not start because the following file is missing or corrupt C:\windows\system32\config\system Switched on my 2nd PC tonight and got a black dos screen :- Windows could not start because the following file is missing or corrupt C:\windows\system32\config\system ...rather than wade through http://support.microsoft.com/kb/307545 I've just booted from Norton Ghost cd and am now restoring a Norton Ghost *.v2i full hd backup taken 13-08-2008, from 2nd hd (in same the machine), and its' now 58% into "Copying volume data over existing volume" This PC has been as solid as a rock for many weeks, ...nay ...several months ! Any ideas as to what could have knocked it for six ? I replaced the D-sub monitor lead with a DVI-D lead before I switched it on, ...can't believe that this blew up the registry !!!! ...have been trying to think what I could have done to it, the last time I used it but, I'm sure I didn't do anything nasty or stupid. I think a Windows update went in during my last session with it but, that seemed fine. regards, richard Tag: Remote access Tag: 1934615
  - 17
    - Disable 2 Windows keys. Info please on how to disable the two Windows keyboard keys - thanks. Mr. Tong Tag: Remote access Tag: 1934583
  - 18
    - Verbatim Store n Go 1GB stopped working, installs wrong driver when Hi, When I plugged the drive in "Verbatim Store n Go 1GB" after adding some files to it from another computer, as I have done many times, XP went and installed the drive as something else using different drivers! Now I have uninstalled it, rebooted, inserted the drive again and same result! It now see's it as a "USBest USB2FlashStorage USB Device". Whats going on?? How do I get it back to normal? It shows up in my computer, but when I try to open it, it says "please insert a disk in drive f:". Drive shows up as zero size. Thanks for reading, any info would be great! Tag: Remote access Tag: 1934574
  - 19
    - SP 3's Warning: "The server you are connected to is uding a security certificate that cannot be verified" XP Pro SP3 With SP3 came this new warning: "The server you are connected to is using a security certificate that cannot be verified" How can I stop this warning! The server is an ATT IP server over which I have no control. Now every time I get email this appears. It is annoying. TIA for any or all thoughts and fixes. EagleOne Tag: Remote access Tag: 1934573
  - 20
    - Sound card not visible after OS Re-Instalation. Greetings, Due to miscellaneous problems, I just reformated my hard drive and re-installed the OS from disks. Unfortunately, in spite of the fact that the BIOS indicates that sound functionality is enabled, the hardware menu under the system folder does not show the sound hardware and or drivers. Perhaps the built-in sound card has gone bad? Or is anyone else aware of any BIOS/OS parameter and/or installation I can execute to re-add the sound hardware and drivers? Otherwise, any tips on pinpointing the sound card as the faulty component would be appreciated. Thank you for your help. Jean-Pierre Tag: Remote access Tag: 1934565
  - 21
    - WiFi/dial-up/SP3download Hi got some good advice last time,try my luck again. Have dial-up but am booting wifi off nephew next door. Keeping dialup right now cause having to reboot sometimes 3-4 times a day running next door to unplug and plug back in the range extender is pain in hinny, my problem is the dialup express is running along with the wifi even when I haven't used it to get on the net, and by doing that it make the whole thing go way slower,didn't always do it now is everytime it loads anything. Do I disable it & if i do what do i do if i need it again? Second ? I allow Microsoft to show new updates & one showed up other day for SP3 when I started to down load it, it said backup files, turn of applications that where running and such, so not sure about it I stoped it now don't know if part is downloaded, or thats why dialup working the way it is. I need Help Please. Tag: Remote access Tag: 1934563
  - 22
    - Service Users and domain printer mapping I have a machine that uses a Users running at the service level and am trying to map a printer shared off of a win98 computer that is part of our 2000 level domain. The machine that the service user is running on is not part of the domain. It is fairly heavily customized and seems to be having problems keeping the mapping. I can map the printer manually no problem but it doesn't seem to want to remember the password(even though we checked the box) and I can't access the keymgr so I can't set that to remember any passwords. Any Ideas? Tag: Remote access Tag: 1934546
  - 23
    - FTP Problem Hi, I am having a very odd problem with FTP. Basically, it won't work. The FTP client seems to connect but then issues an error and no files appear on the remote server. The last time I needed to use FTP was in February of this year, and it worked fine. Now, when I try it, it goes nowhere. I have tried several different FTP clients and accounts, all with the same outcome. It is not a firewall problem; I run only Win XP Pro firewall and have tried it with that disabled + anything else that even MIGHT effect connections. I have tried it in Safe Mode with no success which makes me think it is not a conflict with another app - though I don't believe I have added anything lately. I am attaching the Session Log from WS_FTP Pro to the end of this note in case that might help. HELP PLEASE!!!!!!!!!!! Olen ###################################### WINSOCK.DLL: WinSock 2.0 WS_FTP Pro, Version 8.0, 2003.05.23 Finding Host nursesaregreat.com ... [2008.08.29 05:05:50.909] Connecting to 209.92.50.51:21 [2008.08.29 05:05:50.929] Connected to 209.92.50.51:21 in 0.020028 seconds, Waiting for Server Response [2008.08.29 05:05:51.560] 220 vws0101.fast.net FTP server (Version wu-2.6.1-0.6x.21) ready. [2008.08.29 05:05:51.560] Host type (1): Automatic detect [2008.08.29 05:05:51.560] USER nursesar [2008.08.29 05:05:51.610] 331 Password required for nursesar. [2008.08.29 05:05:51.610] PASS (hidden) [2008.08.29 05:05:51.710] 230-Please read the file README [2008.08.29 05:05:51.960] 230- it was last modified on Fri Jun 14 11:52:59 2002 - 2267 days ago [2008.08.29 05:05:51.960] 230 User nursesar logged in. [2008.08.29 05:05:51.960] SYST [2008.08.29 05:05:52.010] 215 UNIX Type: L8 [2008.08.29 05:05:52.010] Host type (2): UNIX (standard) [2008.08.29 05:05:52.010] Sending "FEAT" command to determine what features this server supports. [2008.08.29 05:05:52.010] FEAT [2008.08.29 05:05:52.060] 500 'FEAT': command not understood. [2008.08.29 05:05:52.060] Apparently, this server does not support the "FEAT" command for automatic discovery of features. [2008.08.29 05:05:52.060] Sending the FEAT command is optional. You can disable it in the site options of the profile. [2008.08.29 05:05:52.060] PWD [2008.08.29 05:05:52.110] 257 "/home/web/n/nursesaregreat.com" is current directory. [2008.08.29 05:05:52.210] CWD /home/web/n/nursesaregreat.com/htdocs [2008.08.29 05:05:52.261] 250 CWD command successful. [2008.08.29 05:05:52.261] PWD [2008.08.29 05:05:52.311] 257 "/home/web/n/nursesaregreat.com/htdocs" is current directory. [2008.08.29 05:05:52.321] TYPE A [2008.08.29 05:05:52.361] 200 Type set to A. [2008.08.29 05:05:52.411] PASV [2008.08.29 05:05:52.461] 227 Entering Passive Mode (209,92,50,51,8,175) [2008.08.29 05:05:52.461] connecting data channel to 209.92.50.51:8,175(2223) [2008.08.29 05:06:13.411] PORT 192,168,0,3,5,54 [2008.08.29 05:06:28.923] Error reading response from server. [2008.08.29 05:06:28.923] Port failed [2008.08.29 05:06:54.881] QUIT [2008.08.29 05:06:56.393] Error reading response from server. [2008.08.29 05:06:56.393] Failed receiving response from server [2008.08.29 05:06:56.393] Dead connections are not restarted For "QUIT" commands. [2008.08.29 05:06:56.393] Connection closed. Ready for next connection. Tag: Remote access Tag: 1934541
  - 24
    - FTP Problem Hi, I am having a very odd problem with FTP. Basically, it won't work. The FTP client seems to connect but then issues an error and no files appear on the remote server. The last time I needed to use FTP was in February of this year, and it worked fine. Now, when I try it, it goes nowhere. I have tried several different FTP clients and accounts, all with the same outcome. It is not a firewall problem; I run only Win XP Pro firewall and have tried it with that disabled + anything else that even MIGHT effect connections. I have tried it in Safe Mode with no success which makes me think it is not a conflict with another app - though I don't believe I have added anything lately. I am attaching the Session Log from WS_FTP Pro to the end of this note in case that might help. HELP PLEASE!!!!!!!!!!! Olen ###################################### WINSOCK.DLL: WinSock 2.0 WS_FTP Pro, Version 8.0, 2003.05.23 Finding Host nursesaregreat.com ... [2008.08.29 05:05:50.909] Connecting to 209.92.50.51:21 [2008.08.29 05:05:50.929] Connected to 209.92.50.51:21 in 0.020028 seconds, Waiting for Server Response [2008.08.29 05:05:51.560] 220 vws0101.fast.net FTP server (Version wu-2.6.1-0.6x.21) ready. [2008.08.29 05:05:51.560] Host type (1): Automatic detect [2008.08.29 05:05:51.560] USER nursesar [2008.08.29 05:05:51.610] 331 Password required for nursesar. [2008.08.29 05:05:51.610] PASS (hidden) [2008.08.29 05:05:51.710] 230-Please read the file README [2008.08.29 05:05:51.960] 230- it was last modified on Fri Jun 14 11:52:59 2002 - 2267 days ago [2008.08.29 05:05:51.960] 230 User nursesar logged in. [2008.08.29 05:05:51.960] SYST [2008.08.29 05:05:52.010] 215 UNIX Type: L8 [2008.08.29 05:05:52.010] Host type (2): UNIX (standard) [2008.08.29 05:05:52.010] Sending "FEAT" command to determine what features this server supports. [2008.08.29 05:05:52.010] FEAT [2008.08.29 05:05:52.060] 500 'FEAT': command not understood. [2008.08.29 05:05:52.060] Apparently, this server does not support the "FEAT" command for automatic discovery of features. [2008.08.29 05:05:52.060] Sending the FEAT command is optional. You can disable it in the site options of the profile. [2008.08.29 05:05:52.060] PWD [2008.08.29 05:05:52.110] 257 "/home/web/n/nursesaregreat.com" is current directory. [2008.08.29 05:05:52.210] CWD /home/web/n/nursesaregreat.com/htdocs [2008.08.29 05:05:52.261] 250 CWD command successful. [2008.08.29 05:05:52.261] PWD [2008.08.29 05:05:52.311] 257 "/home/web/n/nursesaregreat.com/htdocs" is current directory. [2008.08.29 05:05:52.321] TYPE A [2008.08.29 05:05:52.361] 200 Type set to A. [2008.08.29 05:05:52.411] PASV [2008.08.29 05:05:52.461] 227 Entering Passive Mode (209,92,50,51,8,175) [2008.08.29 05:05:52.461] connecting data channel to 209.92.50.51:8,175(2223) [2008.08.29 05:06:13.411] PORT 192,168,0,3,5,54 [2008.08.29 05:06:28.923] Error reading response from server. [2008.08.29 05:06:28.923] Port failed [2008.08.29 05:06:54.881] QUIT [2008.08.29 05:06:56.393] Error reading response from server. [2008.08.29 05:06:56.393] Failed receiving response from server [2008.08.29 05:06:56.393] Dead connections are not restarted For "QUIT" commands. [2008.08.29 05:06:56.393] Connection closed. Ready for next connection. Tag: Remote access Tag: 1934537
  - 25
    - Icons in "My Network Places" I've searched Google Groups and this newsgroup and can't find the answer to what should be a very simple problem. In my home network, when I view My Network Places, I see every available share on all computers on the network. I don't want to see all the shares available, I only want to see the computers on the network as I do in Windows 2000 and Vista. How can I change this behaviour? -- Posted via NewsDemon.com - Premium Uncensored Newsgroup Service ------->>>>>>http://www.NewsDemon.com<<<<<<------ Unlimited Access, Anonymous Accounts, Uncensored Broadband Access Tag: Remote access Tag: 1934536
- Next
  - 1
    - How to remove zxmshwin.dll? My Symantec detect this file in Windows\system32 directory but it could not delete it. I tried to manually delete it but it still does not work. Any ideas? Thx, Andy Tag: Remote access Tag: 1934512
  - 2
    - Hanging up at shut down problem Dell XPS Home - 300 G hard drive, 4 G RAM XP/SP3 Kaspersky Internet Suite 7.0- SpybotSearch & Destroy-Spyblaster- Windows Defender- All Windows Updates current: For about a month, when I shut down my pc, shut down seems to 'hang'. I get the normal shut down screen,"savings settings' windows is shutting down'etc." Then a second or two later, get a black screen, and then back to shutting down, etc. again. This time my pc does shut down. I cannot pinpoint anything I could have done to cause this. Only changes made during this timeframe is uninstalling previous version of S &D & installing latest version (V1.6.0.31) and installing any windows/office 2007 updates. Also installed a second printer. I am NOT very experienced in how to troubleshoot what could be causing this. i was advised to look at the Event Log, but that is way over my knowledge to interpret. Also was suggested to do this (below) but I don't know what that is, or what it does, so didn't know if I should try that or not?? I would appreciate any help or suggestions you can offer me, but please, explain in simple terms or steps that i can follow. Thank you so much for your assistance. You might try running chkdsk /r on the boot drive. You mentioned several other items/procedures, but I don't recall seeing any mention of that. Chkdsk Explained, Understanding What Chkdsk Does - http://support.microsoft.com/kb/314835/EN-US/ Start/Run...type chkdsk /r, with a space between k and /. Type Y, hit Enter. Reboot. Tag: Remote access Tag: 1934504
  - 3
    - training & jobs =93Join us to make future=94 FOR OPT/F-1 STUDENTS FREE TRAINING FOOD ACCOMODATION H1B PROCESSING FOR L1/ L2/ H1/ H4/ EAD/ GC EXCELLENT OPPRTUNITIES TRAINING PLACEMENT Highly Competitive offers for New H1b Transfers About Us: V2 technology inc is serving NJ since 2005, for us our employees are of utmost importance. Our highly skilled and dedicated instructors train you explicitly in market-related technologies for today and tomorrow. We will work with you in developing marketing strategies and finding the assignments of your choice. We not only help you get a job but we build your long lasting careers!!! What are we Looking for: Excellent communication skills. Valid F1/ OPT/ CPT/ H1/ H4/ L1 or valid work status (EAD, GC). Bachelors=92 degree in CS/ IT or previous IT experience. Preferably (not mandatory) Master's Degree in Computers/ Electronics or previous IT experience. Willing to relocate anywhere in USA. What=92s The Deal: H1-B sponsorship to F1/ OPT/ H4/ L1/ L2/ E3/ EAD Transfer of H1 & L1 visas. Green Card sponsorship through PERM Job focused professional training in Java/ J2EE .NET Documentum Share point Oracle Data Modeling Relocation assistance- airfare, hotel accommodation, car rental etc Guarantee lowest bench period. Employee referral program. Effective Resume writing help, Marketing and Placement. Technical mock interviews. Preparation of In Person Interviews 100% Guaranteed placement Get in Touch: Contact immediately to know more about the opportunities with us at: 609-843-0312 or write mail at jobs@v2techinc.com Contact person : John Tag: Remote access Tag: 1934499
  - 4
    - Windows could not start............. I'm getting a "Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM" error message. With the Windows Setup disk I tried running the repair console but when prompted to select which Windows installation to log onto I select the correct drive and I get the BSOD that says ...."Windows has been shut down to prevent damage to your computer REGISTRY _ERROR". I'm stuck! I can't even get into SAFE MODE. Please Help! Thanks in advance. Tag: Remote access Tag: 1934488
  - 5
    - turning off all unnecessary programs .... Is there a list of only the basic files need on startup? How do I turn off those I don't need so they don't interfere with what i am working on in XP? thanks Tag: Remote access Tag: 1934487
  - 6
    - Task bar appears during PowerPoint show Help! For some reason my PPT 03 on my XP machince periodically show the task bar during a PPT show. Seems as something is scanning .... Advise? Tag: Remote access Tag: 1934481
  - 7
    - question testing Tag: Remote access Tag: 1934480
  - 8
    - searching text Is there a program (freeware?) who can find some tekst in any file on a PC what extension it may have THanks for any response Tag: Remote access Tag: 1934478
  - 9
    - Nel_Stack_Inpage_Error Stop:0X00000077 (0XC000000E) Ever since I downloaded Windows XP Service Pack 3, The Blue screen, (death screen) periodically comes up, and NEL_STACK_INPAGE_ERROR appears, with the bottom part of the screen that says stop:0X00000077. Sometimes, after I shut my computer off, let it sit, and re-start it, I can get it running again. Sometimes it will take 3 or 4 restarts to accomplish this. Any help would sure be appreciated. Tag: Remote access Tag: 1934475
  - 10
    - Skype crashing Windows XP when I click green call button When I click green call button on Skype, Windows XP crashes immediately. Done Skype installation and setup so many times on XP and this has never happened. Any suggestions would be most appreciated. -- Margy South Africa Tag: Remote access Tag: 1934474
  - 11
    - Microsoft warns of IE8 lock-in with XP SP3 Microsoft warns of IE8 lock-in with XP SP3 Also notes other problems, including crashing Windows Live Mail http://computerworld.com/action/article.do?command=viewArticleBasic&articleId=9113739 Remember, Beta is for testers!!!! Tag: Remote access Tag: 1934472
  - 12
    - tweak TCP/IP stack How do I tweak the TCP/IP stack in XP? I have DSL at about 2 Mb/sec. Eventually, I will upgrade to FIOS. I suppose that there is software that I can download & I know that there are Registry settings that I can change or add. Is there a wizard in XP (I have XP Pro.) that I can use to tweak the TCP/IP stack? Does TweakUI or Powertoys tweak the TCP/IP stack? So, in other words, what are my options? Thank you. David Tag: Remote access Tag: 1934467
  - 13
    - MDAC 2.8 SP1 on Windows XP SP3 Hello all, I'm trying to install MDAC 2.8 SP1 on a machine that has XP SP3. I'm getting the following error: "This setup does not support installing on this operating system". Does anyone know of a way around this? I need that version of MDAC for some software we need to install on all PCs. Thanks in advance. Tag: Remote access Tag: 1934445
  - 14
    - Windows wont start I have the black screen with white text you get when windows is sfhut down due to a power interruption for ecample, When I try to start windows using any of the menu options ie safe mode, safe mode with networking, safe mode with command prompt, or normally, I just still keep getting the afore-mentioned screen back again. Any ideas? Tag: Remote access Tag: 1934442
  - 15
    - File sort reversed in common dialog For several days now, the list of files and folders is reversed in any application which uses a common dialog for File/Open and File/Save. That is, the files and folders beginning with "Z" are at the top of the list. I can correct it temporarily by right-clicking and choosing "sort by name" but the next time I invoke File/Open or File/Save it is backwards again. How can I fix it permanently? - Rich Tag: Remote access Tag: 1934440
  - 16
    - Need a batch file set priority My OS is WInXP. I have an application. I want to set its priority to below normal or low after I start this application. I desire to do it through a batch file. How can I do it? Thanx/NSP Tag: Remote access Tag: 1934437
  - 17
    - Remote Desktop Does Windows SP3 update installs Remote Desktop? After installing the SP3 update I noticed Remote Desktop program appears in Start menu. I dont need this new functionality add-on and want uninstall it. How to make this correctly? Tag: Remote access Tag: 1934418
  - 18
    - FTP Problem Hi, I am having a very odd problem with FTP. Basically, it won't work. The FTP client seems to connect but then issues an error and no files appear on the remote server. The last time I needed to use FTP was in February of this year, and it worked fine. Now, when I try it, it goes nowhere. I have tried several different FTP clients and accounts, all with the same outcome. It is not a firewall problem; I run only Win XP Pro firewall and have tried it with that disabled + anything else that even MIGHT effect connections. I have tried it in Safe Mode with no success which makes me think it is not a conflict with another app - though I don't believe I have added anything lately. I am attaching the Session Log from WS_FTP Pro to the end of this note in case that might help. HELP PLEASE!!!!!!!!!!! Olen ###################################### WINSOCK.DLL: WinSock 2.0 WS_FTP Pro, Version 8.0, 2003.05.23 Finding Host nursesaregreat.com ... [2008.08.29 05:05:50.909] Connecting to 209.92.50.51:21 [2008.08.29 05:05:50.929] Connected to 209.92.50.51:21 in 0.020028 seconds, Waiting for Server Response [2008.08.29 05:05:51.560] 220 vws0101.fast.net FTP server (Version wu-2.6.1-0.6x.21) ready. [2008.08.29 05:05:51.560] Host type (1): Automatic detect [2008.08.29 05:05:51.560] USER nursesar [2008.08.29 05:05:51.610] 331 Password required for nursesar. [2008.08.29 05:05:51.610] PASS (hidden) [2008.08.29 05:05:51.710] 230-Please read the file README [2008.08.29 05:05:51.960] 230- it was last modified on Fri Jun 14 11:52:59 2002 - 2267 days ago [2008.08.29 05:05:51.960] 230 User nursesar logged in. [2008.08.29 05:05:51.960] SYST [2008.08.29 05:05:52.010] 215 UNIX Type: L8 [2008.08.29 05:05:52.010] Host type (2): UNIX (standard) [2008.08.29 05:05:52.010] Sending "FEAT" command to determine what features this server supports. [2008.08.29 05:05:52.010] FEAT [2008.08.29 05:05:52.060] 500 'FEAT': command not understood. [2008.08.29 05:05:52.060] Apparently, this server does not support the "FEAT" command for automatic discovery of features. [2008.08.29 05:05:52.060] Sending the FEAT command is optional. You can disable it in the site options of the profile. [2008.08.29 05:05:52.060] PWD [2008.08.29 05:05:52.110] 257 "/home/web/n/nursesaregreat.com" is current directory. [2008.08.29 05:05:52.210] CWD /home/web/n/nursesaregreat.com/htdocs [2008.08.29 05:05:52.261] 250 CWD command successful. [2008.08.29 05:05:52.261] PWD [2008.08.29 05:05:52.311] 257 "/home/web/n/nursesaregreat.com/htdocs" is current directory. [2008.08.29 05:05:52.321] TYPE A [2008.08.29 05:05:52.361] 200 Type set to A. [2008.08.29 05:05:52.411] PASV [2008.08.29 05:05:52.461] 227 Entering Passive Mode (209,92,50,51,8,175) [2008.08.29 05:05:52.461] connecting data channel to 209.92.50.51:8,175(2223) [2008.08.29 05:06:13.411] PORT 192,168,0,3,5,54 [2008.08.29 05:06:28.923] Error reading response from server. [2008.08.29 05:06:28.923] Port failed [2008.08.29 05:06:54.881] QUIT [2008.08.29 05:06:56.393] Error reading response from server. [2008.08.29 05:06:56.393] Failed receiving response from server [2008.08.29 05:06:56.393] Dead connections are not restarted For "QUIT" commands. [2008.08.29 05:06:56.393] Connection closed. Ready for next connection. Tag: Remote access Tag: 1934415
  - 19
    - FTP Problem Hi, I am having a very odd problem with FTP. Basically, it won't work. The FTP client seems to connect but then issues an error and no files appear on the remote server. The last time I needed to use FTP was in February of this year, and it worked fine. Now, when I try it, it goes nowhere. I have tried several different FTP clients and accounts, all with the same outcome. It is not a firewall problem; I run only Win XP Pro firewall and have tried it with that disabled + anything else that even MIGHT effect connections. I have tried it in Safe Mode with no success which makes me think it is not a conflict with another app - though I don't believe I have added anything lately. I am attaching the Session Log from WS_FTP Pro to the end of this note in case that might help. HELP PLEASE!!!!!!!!!!! Olen ###################################### WINSOCK.DLL: WinSock 2.0 WS_FTP Pro, Version 8.0, 2003.05.23 Finding Host nursesaregreat.com ... [2008.08.29 05:05:50.909] Connecting to 209.92.50.51:21 [2008.08.29 05:05:50.929] Connected to 209.92.50.51:21 in 0.020028 seconds, Waiting for Server Response [2008.08.29 05:05:51.560] 220 vws0101.fast.net FTP server (Version wu-2.6.1-0.6x.21) ready. [2008.08.29 05:05:51.560] Host type (1): Automatic detect [2008.08.29 05:05:51.560] USER nursesar [2008.08.29 05:05:51.610] 331 Password required for nursesar. [2008.08.29 05:05:51.610] PASS (hidden) [2008.08.29 05:05:51.710] 230-Please read the file README [2008.08.29 05:05:51.960] 230- it was last modified on Fri Jun 14 11:52:59 2002 - 2267 days ago [2008.08.29 05:05:51.960] 230 User nursesar logged in. [2008.08.29 05:05:51.960] SYST [2008.08.29 05:05:52.010] 215 UNIX Type: L8 [2008.08.29 05:05:52.010] Host type (2): UNIX (standard) [2008.08.29 05:05:52.010] Sending "FEAT" command to determine what features this server supports. [2008.08.29 05:05:52.010] FEAT [2008.08.29 05:05:52.060] 500 'FEAT': command not understood. [2008.08.29 05:05:52.060] Apparently, this server does not support the "FEAT" command for automatic discovery of features. [2008.08.29 05:05:52.060] Sending the FEAT command is optional. You can disable it in the site options of the profile. [2008.08.29 05:05:52.060] PWD [2008.08.29 05:05:52.110] 257 "/home/web/n/nursesaregreat.com" is current directory. [2008.08.29 05:05:52.210] CWD /home/web/n/nursesaregreat.com/htdocs [2008.08.29 05:05:52.261] 250 CWD command successful. [2008.08.29 05:05:52.261] PWD [2008.08.29 05:05:52.311] 257 "/home/web/n/nursesaregreat.com/htdocs" is current directory. [2008.08.29 05:05:52.321] TYPE A [2008.08.29 05:05:52.361] 200 Type set to A. [2008.08.29 05:05:52.411] PASV [2008.08.29 05:05:52.461] 227 Entering Passive Mode (209,92,50,51,8,175) [2008.08.29 05:05:52.461] connecting data channel to 209.92.50.51:8,175(2223) [2008.08.29 05:06:13.411] PORT 192,168,0,3,5,54 [2008.08.29 05:06:28.923] Error reading response from server. [2008.08.29 05:06:28.923] Port failed [2008.08.29 05:06:54.881] QUIT [2008.08.29 05:06:56.393] Error reading response from server. [2008.08.29 05:06:56.393] Failed receiving response from server [2008.08.29 05:06:56.393] Dead connections are not restarted For "QUIT" commands. [2008.08.29 05:06:56.393] Connection closed. Ready for next connection. Tag: Remote access Tag: 1934414
  - 20
    - font failures in wordpad save dialog Xp pro (SP-3 and all current updates) I've noticed an odd bug in my laptop. Wordpad displays blank boxes forfilename text in dialog boxes. Someone gave me a fi earlier but I lost it. What was that fix? Tag: Remote access Tag: 1934404
  - 21
    - Application lock-up In Excel 2007, while saving a spreadsheet; selecting, deleting or inserting columns; etc, an hourglass appears on my monitor and I can hear the local hard disk spinning (the sound is more noticeable than when the hard disk is not being accessed). But, after the process ends, the hard disk repeatedly speeds up and slows down and I can't work on the spreadsheet (the hourglass remains on my monitor). Task Manager's "Application" page shows that "Microsoft Excel" is "Not Responding". And, the "Processes" page shows that the "Mem Usage" for EXCEL.EXE does not change. What is causing this problem and how can I resolve it? Tag: Remote access Tag: 1934398
  - 22
    - download adobe illustrator + photoshop cs3 http://gpirate.com/search?hl=en&q=illustrator&btnG=Search download adobe illustrator + photoshop cs3 http://gpirate.com/search?hl=en&q=illustrator&btnG=Search Tag: Remote access Tag: 1934393
  - 23
    - How do I copy the folder structure? When I archive photos downloaded material to DVD, I need the folder structure in Windows Explorer printed on the surface of the DVD. Is there any way to copy and paste the exploded folder structure from Explorer to a printer so as to print this on a DVD? This would save a lot of labelling. Please help, Frank Tag: Remote access Tag: 1934379
  - 24
    - Is this normal? I am using Windows XP Pro SP3 and use AVG 8.0 as my sole Antivirus and Antispyware protection. I scan once a week and update everyday. I have been using this product for a few years (since AVG 6) and not once (okay, maybe once or twice in three years) has it found a virus or spyware, other than tracking cookies. I don't use the internet very often except to visit "mainly" the links in my Favorites list. I also do several Google searches, but also use AVG's Link Checker to navigate to safe pages only. Is it normal to be 100% virus and spyware free, or is AVG letting viruses and spyware through without seeing it? Or maybe I am simply fortunate to not have run into any malware as such? (I have visited some "questionable" sites before and even then, had no threats found!) I don't ever get pop ups or a slow computer environment (characteristic of spyware) and my home page has never changed. I don't think any unauthorized programs are doing something they shouldn't, based on normal computer activity. Does it sound like my computer is clean? Is AVG a good product, or am I unknowingly infected by threats? Or is it too hard to say? Or am I asking too many questions! Tag: Remote access Tag: 1934378
  - 25
    - usb hard drive My pc with Windows XP is having a problem putting things on USB hard drive. I have tried to put Files (like My Docs) to USB hard drive. There are indications it's doing that. However, the files in USB drive don't open with any content. Won't let me delete them, either. Get an error message which says there are files in the directories. Now, I have one of the low priced USB port things I bought off Ebay and put in. Could be something wrong there. What does this sound like? Tag: Remote access Tag: 1934377

I have a laptop and a desk top computer. I work out of town and have my lap
top with me. Is there a way I can access my home computer from my laptop if
both are logged on to the internet

Top

Re: Remote access by JF

JF
Sat Aug 30 06:43:22 PDT 2008

*Bonjour GregNga * !
<news:365FD087-BAAD-4A73-B3CD-B8F6A4E7E691@microsoft.com>

> I have a laptop and a desk top computer. I work out of town and have my lap
> top with me. Is there a way I can access my home computer from my laptop if
> both are logged on to the internet

what do you think of
www.teamviewer.com

--
Regards, Jean-François

Top