KB940510 UPDATE

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - XP SP 3 After installing XP SP3 automatic updates does not work! It keeps telling me it could not install updates. Anybody have any Ideas? -- eldend Tag: KB940510 UPDATE Tag: 254868
  - 2
    - XP SP3 Problem I am having trouble with 2 PCs that once the XP SP3 update is finished, refuse to restart correctly. Both get the same errors. Its the BSOD with a stop error as follows: STOP: 0X0000008E (0X00000003, 0X80AB912C, 0XEF12198C, 0X00000000). Beginning of physical memory dump. Then the blurb about restarting the PC if its the first time the error has appeared. After 3 restarts still the same error on both PCs. The BSOD doesn't give any additional info. Any ideas?? Thanks, Larry Hearold Tag: KB940510 UPDATE Tag: 254864
  - 3
    - sp3 update If you want to fix this than when your computer goes to ask you what to start it in start it in safe mode network. when you get there then go to control panel, add and remove programs, ad find sp3 and removeit. it will take a little while to unload but when it's done re boot and all shoulg be well. -- freeport38 Tag: KB940510 UPDATE Tag: 254859
  - 4
    - can't install sr3 Hi All, When I try to install sr3 I get an access denied error. What can I do to fix this? I am using windows xp home sr2. -- Regards, Gary Metzler Outta Sight Travel, Inc. 610 NW Marion Ave. Port St. Lucie FL 34983 Phone: 772-336-8747 send to: gmtravel@bellsouth.net http://www.outtasighttravel.com Msn messenger: gmetzler1150@hotmail.com Skype name: garymetz Tag: KB940510 UPDATE Tag: 254850
  - 5
    - Lost Toolbar After XP SP3 Update I successfully applied XP Professional SP3, no known problems at this time. A minor annoyance is that the "Address" toolbar has disappeared from the list of available toolbars for display when right-clicking the Windows toolbar. How do I get it back? TIA -- Jim Beachy Tag: KB940510 UPDATE Tag: 254847
  - 6
    - SP3 download error 0x80070006 - "The handle is invalid" I have tried the various workarounds for downloading SP3, but I still get the same error just as SP3 starts downloading: 0x80070006 "The handle is invalid." I'm pretty sure I have SP2 loaded already. WHat else could be going wrong? Thanks in advance. Tag: KB940510 UPDATE Tag: 254846
  - 7
    - vista code 80244019 i get this code and it tells me it can't search for updates ..... any help would be appreciated Tag: KB940510 UPDATE Tag: 254843
  - 8
    - Zune 2.5 update issue Last night updated to the new version of Zune, the firmware installed just fine and I downloaded some TV shows which all synced up to the device. The problem is that now nothing will play, I select a song, push play and it just blinks.. Same with video, and even the radio wont work. What's the deal, is there anything I can do to fix this? Tag: KB940510 UPDATE Tag: 254842
  - 9
    - SP3 Download for XP MCE 2005? Please could someone point be to a downloadable version of SP3 which is compatible with XP MCE 2005, if such exists? I ask because I recall reading that SP3 for MCE is only available via Windows Update and the download I've found specifies "Supported Operating Systems: Windows XP Home Edition ; Windows XP Professional Edition ; Windows XP Service Pack 1; Windows XP Service Pack 2", i.e. not MCE. For me, Windows Update has only produced a series of failures on two systems, so I'd like to try something else. Thanks for any help or clarification. Dick K Tag: KB940510 UPDATE Tag: 254837
  - 10
    - Windows XP Home edition SP3 update stops PC booting up I updated windows XP home last night with SP3 the update hung and I had to reboot after 2 hours. When it rebooted a blue screen flashed up and the PC rebooted. It just circles around in this loop. I tried safe mode but it did the same. I can't tell what the blue screen says as it flashes past too quickly. I then tried reinstalling windows, but get back to the same problem when I try to update to SP3. I can now boot into safe mode and restore to before the SP3 update. But if I leave windows in this condition it won't have any of the security updates. Can anyone help please, I'm only a home user and not very technical. Tag: KB940510 UPDATE Tag: 254835
  - 11
    - Does the SP2 CD image access the Internet during install? I have downloaded the SP3 CD image from the MS Download Centre and copied it to a CD. You recommend that during SP3 installation the anti-virus is disabled, in which case I would like to disconnect the machine from the Internet. Does the SP3 install process access the Internet when running from the CD image? Also, my machine (under French XP Prof) will not run well if Automatic Updates are activated - it hangs initialising the updates, displaying the list of installed programs, accessing the E:\ drive, etc. Will this cause problems with the installation of SP3? (Note that with the auto update service deactivated, it runs fine). Will SP3, if successfully installed, eliminate the above problems? -- David Llewellyn Tag: KB940510 UPDATE Tag: 254830
  - 12
    - Windows XP SP3 update Have tried twice to install this update and both times it has caused the computer to 'hang' when about half-way through. Prog.Man indicates that the program is still running - but after two hour (each time) I have had to forcibly shut the computer down. Please help -- annch Tag: KB940510 UPDATE Tag: 254829
  - 13
    - Windows Media Player icon for SP3 in Control Panel Add/Remove list This is a multi-part message in MIME format. ------=_NextPart_000_000A_01C8B0BD.613A0900 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi I installed Windows XP Service Pack 3 yesterday, but I had to cancel the = download/installation twice before what seemed to be a successful = install. The cancellations were on account of its taking longer than I = thought was usual.... Microsoft Update shows SP3 as installed after those two cancelled = updates. No outstanding high priority updates are shown there. Likewise = the Belarc Advisor tells me SP 3 is installed.=20 System Tools-->System Inforamtion also indicates that SP 3 is installed. The entry in the Add/Remove programs at the Control Panel also shows: = Windows XP Service Pack 3 to be installed.=20 However, there is a windows Media Player icon next to the SP3 entry in = the Add/Remove list instead of the usual Windows Update type icons. I notice a similar Windows Media Player icon for the Microsoft = Compression Client Pack 1.0, probably installed ~2 years ago, but not = sure if it was likewise downloaded via Windows Update. So far I haven't experienced any issues with the SP3. However, I do find = that Windows Media Player icon next to the service Pack 3 entry very = baffling. Can I assume all is well nonetheless?=20 Any explanations for that odd icon? Does it indicate some corruption in the installation of SP3? Thanks in advance: -eli =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D Windows XP Professional Edition SP3 Zone Alarm Internet Security Suite 7.0.470.000 ------=_NextPart_000_000A_01C8B0BD.613A0900 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Diso-8859-1"> <META content=3D"MSHTML 6.00.6000.16640" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY> <DIV><FONT face=3DArial size=3D2>Hi<BR><BR>I installed Windows XP = Service Pack 3=20 yesterday, but I had to cancel the download/installation twice before = what=20 seemed to be a successful install. The cancellations were on account of = its=20 taking longer than I thought was usual....</FONT></DIV> <DIV><FONT face=3DArial size=3D2><BR>Microsoft Update shows SP3 as = installed after=20 those two cancelled updates. No outstanding high priority updates are = shown=20 there. Likewise the Belarc Advisor tells me SP 3 is installed. = </FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>System Tools-->System Inforamtion = also indicates=20 that SP 3 is installed.<BR><BR>The entry in the Add/Remove programs at = the=20 Control Panel also shows: Windows XP Service Pack 3 to be installed.=20 </FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2><STRONG>However, there is a windows = Media Player=20 icon next to the SP3 entry in the Add/Remove list instead of the usual = Windows=20 Update type icons.</STRONG></FONT></DIV> <DIV><BR><FONT face=3DArial size=3D2>I notice a similar Windows Media = Player icon=20 for the Microsoft Compression Client Pack 1.0, probably installed ~2 = years ago,=20 but not sure if it was likewise downloaded via Windows Update.<BR><BR>So = far I=20 haven't experienced any issues with the SP3. However, I do find that = Windows=20 Media Player icon next to the service Pack 3 entry very = baffling.<BR><BR>Can I=20 assume all is well nonetheless? </FONT></DIV><FONT face=3DArial = size=3D2> <DIV><BR>Any explanations for that odd icon?</DIV> <DIV> </DIV> <DIV>Does it indicate some corruption in the installation of=20 SP3?<BR><BR><BR>Thanks in advance:<BR></DIV></FONT> <DIV><FONT face=3DArial = size=3D2>-eli<BR>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D<BR><BR>Windows XP=20 Professional Edition SP3<BR>Zone Alarm Internet Security Suite=20 7.0.470.000</FONT></DIV></BODY></HTML> ------=_NextPart_000_000A_01C8B0BD.613A0900-- Tag: KB940510 UPDATE Tag: 254823
  - 14
    - Error 0x87FF054F while installing SP3 During installation of Service Pack 3 gets the message of internal erro and error code 0x87FF054F. In svcpack.log file I found the lines Trying CheckVLKForBlock again Error: CheckVLKForBlock failed delied subke HKEY_CLASSES_ROOT\CLSID\{00020420-0000-0000-C000-000000000046}\InprocServer3 from registry but still not installing. The last lines from svcpack.lo are 172.375: Trying CheckVLKForBlock again 173.235: Error: CheckVLKForBlock failed 173.297: Inventory complete: ReturnStatus=536741199, 138531 ticks 173.344: Num Ticks for invent : 138594 175.578: UnRegisterSpuninstForRecovery, failed to delet SpRecoverCmdLine value, error 0x2 175.578: DoInstallation: Failed to unregistering spuninst.exe fo recovery. 175.610: Internal error. 184.844: Update.exe extended error code = 0x1ffe054 -- Mechmea ----------------------------------------------------------------------- Mechmeat's Profile: http://forums.techarena.in/member.php?userid=4855 View this thread: http://forums.techarena.in/showthread.php?t=96391 http://forums.techarena.i Tag: KB940510 UPDATE Tag: 254818
  - 15
    - Windows SP3 ddoes not recognize my OS's language. Downloaded the stand alone file for an update to SP3 in my Windows XP Media Center Edition computer but although I downloaded the right file (SP3, Swedish version), I keep getting the message that installation is not possible since the file and my OS have different languages. I know that not to be the case since my OS is in Swedish as well. Does anybody have any ideas as to what the glitch may be? Thanks. Tag: KB940510 UPDATE Tag: 254813
  - 16
    - uninstalling SP3 was told by MS Support not to use Add/Remove when removing SP3 but instead to use System restore to revert to previous points prior to installing SP3. SInce I cannot revert to a previous point created by System point prior to installing SP3, I am thinking of reinstalling SP3 without remove it or remove it and then reinstall it. Which option would you guys recommend? Tag: KB940510 UPDATE Tag: 254809
  - 17
    - System restore After installing SP3, unable to revert to a point prior to installing SP3. anyone else? Tag: KB940510 UPDATE Tag: 254807
  - 18
    - Hardware devices not recognized after SP3 update Just updated XP Pro to SP3. I thought it went smooth until I realized that Windows XP Pro does not recognize either of my two optical drives, a DVD ROM and a DVD-RW. The drivers are installed and updated, at least according to Device Manager, but it can not locate them - they are listed in Device Manager. I continue to get an error message, Code 41. How do I fix this? RSinn Tag: KB940510 UPDATE Tag: 254798
  - 19
    - I learned, SP 3 I learned several months ago about this website after having issues wit another MS Update. It only took a week or two for them to send out a fi for the problem. But, what a pain. I learned after that experience to come here prior to downloading an updates from our trusty MS. It seems it is paying off once again. will not download SP 3 anytime soon until I here that it doesn't screw up m computer. The reason is because I don't have hours and hours to spen learning how to stay calm and muddle my way through the MS maze o fixit articles. I have a job and a little bit of a life. Why woul anyone who uses this forum make a major MS download without checkin here first?? So, thanks forum -- lernm ----------------------------------------------------------------------- lernme's Profile: http://forums.techarena.in/member.php?userid=3748 View this thread: http://forums.techarena.in/showthread.php?t=96386 http://forums.techarena.i Tag: KB940510 UPDATE Tag: 254797
  - 20
    - windows xp service pack 3 partial install! So I downloaded service pack 3 and got to the end and it said installation failed and then said that service pack 3 was partially installed and my computer might now work right, then my computer restarted. I would like to know how to correct this, my computer seems to be fine, everything is running right, but I would like to be able to install the update. Tag: KB940510 UPDATE Tag: 254796
  - 21
    - Error Code 0x8007F0F4 when trying to install SP3 on windows xp Anyone knows this problem and how to fix it? Tag: KB940510 UPDATE Tag: 254795
  - 22
    - 80072EE2 error on Vista SP1! I'm receiving the 80072EE2 error and I just updated to Vista SP1. I tried the resolve methods offered by Microsoft but it seems the documentation is written for XP machines. Does anyone have suggestions? Tag: KB940510 UPDATE Tag: 254779
  - 23
    - Service Pack 3 Setup Error I am doing an update to SP (Pro) to SP 3 for a client. They have 7 PCs that need this update. On three of the PCs I am getting the following error. Service Pack 3 Setup cannot update a checked (debug) system with a free (retail) version of Service Pack 3, or vice versa. The COA is valid on all theree. Two are Dell and one is an OEM version. I don't quite understand the error and have had no luck in finding it anywhere. Need some help please. Thanks, Larry Hearold Tag: KB940510 UPDATE Tag: 254773
  - 24
    - Error Code: 0x80200010 when trying to XP SP3 I've tried to update my system and keep getting Error Code: 0x80200010 . I'm cluless. I've tried to seach the code but only get very old posts. HELP Tag: KB940510 UPDATE Tag: 254763
  - 25
    - Wireless Failure after Service Pack 3 After configuring a new installation of XP at Service pack 2 Compact wireless usb adapter (model wusb54gc) I connected to the update site to download the patches and went ahead with sp3. Since instaling sp3, if I use the XP configuration utility I cannot get any connection and if I use the Linksys tool, I get a very low speed. The only way I got this to work was deleting and reinstalling the device driver. Needless to say I have stopped all upgrading until we can figure out why wireless is being disrupted. Is it USB related or is it wireless? Any suggestions would be appreciated. Tag: KB940510 UPDATE Tag: 254753
- Next
  - 1
    - windows xp service pack 3 can anyone help me out here with this question: Loooking on this discussion board, i can see that there are problems with sp3, however I still decided to go and download it. BUT when I go to the windows update website to get SP3, it tells me that infact there are no critical updates to install which means it does not show service pack 3. I do not understand why as I have service pack 2 installed and the update was put on windows update this morning. Anyone know why i have currently denied access to service pack 3? I AM A HOME USER SO THE CONFLICT ISSUE WITH SP3 DOES NOT AFFECT ME. Help would be appreciated because at least you guys on this board can download SP3. Tag: KB940510 UPDATE Tag: 254740
  - 2
    - Error 0xc0000142 After Loading XP SP3 I loaded SP3 for XP and now all I have is the blue screen of death. STOP: c000021a {Fatal system Error} The Windows Logon Process system process termenated unexpectedly with status of 0xc0000142 (0x00000000 0x00000000). The system has been shutdown. Any idea what I can do -- rameses ----------------------------------------------------------------------- ramesess's Profile: http://forums.techarena.in/member.php?userid=4853 View this thread: http://forums.techarena.in/showthread.php?t=96376 http://forums.techarena.i Tag: KB940510 UPDATE Tag: 254739
  - 3
    - Failed Download kb936782 Reveiw download history shows update kb936782 failed for IE7 XP. I went to add/remove programs and removed it from my laptop. What do I do now to re-download the update because when I ran Microsoft updates It couldn't finish from error code 0008300 something to that affect? -- Centurion Tag: KB940510 UPDATE Tag: 254732
  - 4
    - Is there a way to verify if SP3 is properly installed? This is a multi-part message in MIME format. ------=_NextPart_000_0006_01C8B062.87BA0D60 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hello: I installed the SP3 for Windows XP this morning. the process didnt go = smoothly at all. I had to cancel it twice. It finally installed. The was = a cmd prompt after the installation completed rebootstating "access = denied!!!". But after this all went smooth. The Windows Update site shows it was installed. windows xP Service Pack = 3 also shows as installed in the Control Panel. However, the icon next = to this entry in the Add/Remove program is that of Windows Media Player, = and not what one might expect in the way of icons for a Windows update.=20 The earlier windows updates are no longer showing in the Control Panel. = I assume that's becuase the SP3 has replced them. Can you tell me if there is some simple user-friendly program such as a = file check I can run to verify if SP 3 is correctly installed? I'm concerend given the difficulties during this mornnig's installation = procedure and that Windows Media Player icon in the Control Panel next = to Windows XP SP3. Thanks in advance: -Eli =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D Windows XP Professional Edition SP 3 Zone Alarm Internet Security Suite 7.0.470.000 ------=_NextPart_000_0006_01C8B062.87BA0D60 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Diso-8859-1"> <META content=3D"MSHTML 6.00.6000.16640" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY> <DIV><FONT face=3DArial size=3D2>Hello:</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>I installed the SP3 for Windows XP this = morning.=20 the process didnt go smoothly at all. I had to cancel it twice. It = finally=20 installed. The was a cmd prompt after the installation completed = rebootstating=20 "access denied!!!". But after this all went smooth.</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>The Windows Update site shows it was = installed.=20 windows xP Service Pack 3 also shows as installed in the Control Panel. = However,=20 the icon next to this entry in the Add/Remove program is that of = <STRONG>Windows=20 Media Player</STRONG>, and not what one might expect in the way of icons = for a=20 Windows update. </FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>The earlier windows updates are = no =20 longer showing in the Control Panel. I assume that's becuase the SP3 has = replced=20 them.</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>Can you tell me  if there is some = simple=20 user-friendly program such as a file check I can run to verify if = SP 3 is=20 correctly installed?</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>I'm concerend given the difficulties = during this=20 mornnig's installation procedure and that Windows Media Player icon in = the=20 Control Panel next to Windows XP SP3.</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>Thanks in advance:</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>-Eli</FONT></DIV> <DIV><FONT face=3DArial = size=3D2>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D</FONT></DIV>= <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>Windows XP Professional Edition  = SP=20 3</FONT></DIV> <DIV><FONT face=3DArial size=3D2>Zone Alarm Internet =  Security  Suite=20 7.0.470.000</FONT></DIV></BODY></HTML> ------=_NextPart_000_0006_01C8B062.87BA0D60-- Tag: KB940510 UPDATE Tag: 254725
  - 5
    - Windows XP SP3 and .NET upgrades I installed SP3 version 20080414.031525 downloaded from Microsoft today. Installation went OK. Two packages failed (KB928365 and KB928366). Those are .NET 2.0 and .NET 1.1 SP1. There is .NET 2.0 already installed but I cannot either repair or remove it (Contol Panel->Add/Remove Software). I tried to install those two many times. KB928365 - error code 0x663 KB928366 - error code 0xE0434F4D There was an error window: SLx(x).tmp (x(x) was different each time). SLx(x).tmp has encountred a problem and needs to close. History of ugrades: From 2004 it was a plain vanilla XP Home. I had no problem. MSI Motherboard with Athlon64 3000+, 2.0 GHz and 1.5 GB RAM. HDD 120 GB + 320 GB. Dual boot Windows and Ubuntu 8.04 on separated physical drives. A month ago I needed SP2 to run a new hardware (E-MU Tracker Pre USB 2.0). So I upgraded to SP1 + upgrades, SP2 + upgrades. Everything was fine until upgrades to SP2. My computer did boot, past GRUB (dual boot menu), XP screen and Welcome but my desktop had a strange red mark, and my mouse and keyboard were dead. Last known working... didn't help. I started from the last automatic recovery point using Safe Mode. Now everything was fine. At least it seemed so. Sony Vegas didn't work anymore. An error occured during the current operation. The Microsoft .NET runtime could not be initialized. Please install the .NET Framework (download is available from Windows Update). Well, that was the first time I tried to repair and uninstall .NET. Didn't work. Than I installed SP3 RC2. Everything was smooth. But the same problem with Vegas. Now I installed the finel version od SP3 (uninstalled SP3 RC2 before). The Vegas (.NET) problem persist plus upgrades of .NET. Should I try to uninstall .NET 1.1? Or just install entire .NET without uninstall? -- ZoxX Tag: KB940510 UPDATE Tag: 254716
  - 6
    - Windows XP SP3 Would have been nice if Microsofts Sub-Contractors would have gotten the bugs out of release version! Tried 3 times to install and haf way thru it locked up! Telling all my friends to not install til Microsoft gets the bugs out! MAYBE MICROSOFT SHOULD HIRE AMERICAN WORKERS AND NOT HIRE FROM OVERSEAS BECAUSE WE DO NOT HAVE ANY AMERICAN WORKERS SMART ENOUGH TO RELEASE WITH BUGS IN IT! -- Ken Tag: KB940510 UPDATE Tag: 254713
  - 7
    - started with "blue screen and ended up with "missing system32\hal. Hi folks... I'm praying somone can assist me as I've been waiting to hear back from Microsoft on this as it started (when I noticed - my daughter's computer) when trying to run updates from Microsoft. Her system is older, running XP Pro and there isn't much on it believe it or not. AVG is the anti-virus and I've also tried running some registry scans. No avail, but cleaned a few things up. Mostly having to run in Safe Mode and Safe Mode w/Networking, yet will still eventually end up getting that blue screen and many times re-looping and getting stuck & F8 doesn't always work either. Again, this is my daughterâ??s computer, and I believe this started about a week or so ago. She finally told me a few days ago and when I started taking a look at her system, this is all new, not past issues Iâ??ve experienced. 1. The first thing I tried to do was to run a scan on her system to see if there were virus, etc. 2. Then I tried to run a windows update and thatâ??s when I personally encountered the first blue screen of manyâ?¦ 3. I had already attempted many times to Use the â??Last Known Good Configurationâ?? to no avail, a few times the system couldnâ??t even get to running Windows without having returned directly to the blue screen. 4. Then I was able to use the Safe Mode with Networking, tried running Windows Update that way, didnâ??t work. Multiple attempts each ending in Blue Screen 5. I noticed that a message finally gave me something about a Driver issue, so went to Device Manager, and updated/reinstalled drivers a display screen and a multimedia device (neither of which I am familiar), but then the Device Mgr was clear. 6. Then attempted to run Windows update and it did actually download the Visualization Tool & Installed, thought I was actually getting somewhereâ?¦ But then after it asked me to continue on with scanning for updates, I was back to the blue screen and it proceeded to no longer be able to start Windows again, just re-routing back to Blue Screen. 7. Last Known Good Configuration again, didnâ??t work. I do have screen shots of the blue screens it gives, but the error codes are of no help as the four it gives me, always change. I've finally turned the damn thing off as it was just re-looping to blue screen and couldn't load windows, so after 3 days of tyring to figure it out, I've given up.... Lastly, apparently my daughter turned the computer on, and now all it shows is a black screen with the "missing system32\hal.dll" file. Now I've seen this when I got a brand new system running both Mac & OS systems, when I loaded windows. I figured out a work around for it on the Mac, but this system only runs Windows, so not sure what to do from here with it... She has some things on her system that she's hoping I don't have to do a fresh install so any suggestions are tremendously appreciated. Please let me know what further info I can provide to be of assistance. Thanks so much, Sunny Tag: KB940510 UPDATE Tag: 254707
  - 8
    - Device manager and Network connection w/SP3 Since the install of service pack 3 for windows I have not been able to use the device manager or to see current conenctions on a LAN. Any work arounds to permit me to see this information. I use this a great deal while I travel Tag: KB940510 UPDATE Tag: 254706
  - 9
    - MBSA/Update Inventory Tool Anyone have an idea as to what version of XML parser is required for MBSA 2.1 and/or Microsoft Update Inventory Tool? None of the March/April Office patches are showing as required and I'm thinking it might be the version of XML parser - 3.0, no SP - that I'm running. Thanks! Tag: KB940510 UPDATE Tag: 254703
  - 10
    - Where'd SP3 Go? I had one of those notices (the little yellow shield icon in my systray)when I booted up today saying that new updates were available for my computer, and the icon's details said it was XP SP3, so I hit the the "download" button and the icon disappeared and nothing downloaded. I rebooted my computer to see if the icon would come back and it didn't. The I went to the normal Microsoft Program Update site and let it check my system for available updates and it only showed the latest Windows Authentication update being available, nothing else. What gives? Tag: KB940510 UPDATE Tag: 254697
  - 11
    - Win XP SP3 failure Error Code: 0x80004005 Win Update told me today that SP3 was ready to download. Tried and it failed after about 20 minutes after downloading a "preparing your computer for download". Tried a 2nd time with same result each with the error code Error Code: 0x80004005. Seems to be a different code to other people, so what is it and how can I overcome it. Tag: KB940510 UPDATE Tag: 254695
  - 12
    - Some computers does not download updates... Hi all, A week ago I installed WSUS 3.0 SP1 on a Windows Server 2003 (domain controller) computer. I had been running WSUS 1.0 for many years without problems. Now I configured everything and it looks all is OK but my test PC does not get the updates. Everybody is reporting to the WSUS server. I authorized a bunch of updates for this test PC. In my settings there is not timeline for updates to avoid clogging the slow link to remote sites when time expires. I have also configured BITS to restrict bandwidth usage by WSUS to certain computers. The BITS remains the same as was configured to work with WSUS 1.0. I already checked the result policy by using Group Policy Management console to a test PC and the policies are applied as expected. I checked the IIS log on the WSUS server to check if the test PC is downloading the updates and I found a log like this to appear several times a day since new WSUS installation GET /selfupdate/WSUS3/x86/Other/wsus3setup.cab 0805061117 80 - 10.10.10.150 Windows-Update-Agent 200 0 0 and no more. This is the only GET I have for 10.10.10.150 computer. Instead other computers are downloading updates. For example: GET /Content/37/C87E2FE94DD873224AFA65E2AF2473CA3E307A37.CAB - 80 - 10.10.41.222 Microsoft+BITS/6.6 206 0 0 It is curious but it looks like all computers in the network 10.10.10.x are experiencing the same problem like 10.10.10.150. The WSUS server is located in the same 10.10.10.x network What can be wrong? Any hint is welcomed Thanks in advance Sammy These are my test PC 10.10.10.150 GPO WSUS settings: Policy Setting Winning GPO Allow Automatic Updates immediate installation Enabled WSUS Test Allow non-administrators to receive update notifications Enabled WSUS Test Automatic Updates detection frequency Enabled WSUS Test Check for updates at the following interval (hours): 1 Policy Setting Winning GPO Configure Automatic Updates Enabled WSUS Test Configure automatic updating: 3 - Auto download and notify for install The following settings are only required and applicable if 4 is selected. Scheduled install day: 0 - Every day Scheduled install time: 03:00 Policy Setting Winning GPO Enable client-side targeting Enabled WSUS Test Target group name for this computer Test Policy Setting Winning GPO Specify intranet Microsoft update service location Enabled WSUS Test Set the intranet update service for detecting updates: http://netserverback Set the intranet statistics server: http://netserverback (example: http://IntranetUpd01) Tag: KB940510 UPDATE Tag: 254685
  - 13
    - XP SP3 Major flaw I was wondering if anyone else had this issue. On my wife's HP and my son's PC, did new installs, however express update chooses to install SP3 which then prevented any other updates from being downloaded or shown after. Thinking it installed all updates, Windows live mail, etc... would not install. After contacting the support, the only thing that worked was to restore to the fresh install prior to SP3 and then live apps worked and installed flawlessly. Another thing, I updated manually and even then had a hard time and had to go back to the update site manually, "not from PC" else couldn't get any updates besides the SP3 update. What a mess. A note:even when trying to go to update site using browser, if SP3 installed first, couldn't get any other updates. My PC handled it fine but I already had all my updates and wasn't a fresh install as the other two. My suggestion, manually install ALL updates except for SP3 , then SP3 although, I am not chancing installing SP3 on those systems quite yet. Paul -- Duh-Oh! Tag: KB940510 UPDATE Tag: 254683
  - 14
    - error code 0x80070003 i keep trying to download xp sp2 but i get the message error code 0x80070003 any suggestions?... Tag: KB940510 UPDATE Tag: 254675
  - 15
    - Vista Ultimate Wont Update When manually checking I keep getting various errors for the last two days. Is it just busy servers (SP frenzy) ?? I noticed this morning that I had problems downloading Newsgroup messages to Windows Mail also, which makes me think that maybe it's a problem at MSFT's end. -- Peter Toronto, Canada XP Pro SP3 x 2/Vista Ultimate SP1 Triple Boot Tag: KB940510 UPDATE Tag: 254667
  - 16
    - WindowsUpdate_80070658 Office updates fail to install. When I got the update that installed service pack 1 for office 2007 all of my shortcut icons disapeared and all office shotcuts wont work . so inorder to open and office program I resorted to finding the icons and puting the new shortcuts on my desktop. Now I have an update for office that has been trying to install and fails repeatedly since 4/8 as a result I am NOT a happy person. and really tired of the fact that MS refuses to adress this issue. if anyone has a solution (Beside switching to Mac which Will be my next computer) then please let me know. Tag: KB940510 UPDATE Tag: 254665
  - 17
    - XP SP3 hung, hung and crashed (3 failures) Existing software: Windows XP Professional SP2, IE7. 1. [First installation attempt] Automatic updates says updates available. It's SP3. Yippi. Accepting, then update icon disappears and after some hours of absolutely nothing, I go to Windows Update site. 2. [Second installation attempt] Installing from Internet Explorer. The EULA is even more offensive than usual, granting the right for Microsoft to install anything and to collect information about anything without even notifying me. Oh well, I accept anyway (I mean, I'd already done so without even glancing at it, the first time, I think). Progress meter is *fakeware*. First completely blank, then after half hour or so some activity but lying about what it does. E.g. downloading with zero network activity (I'm checking in Task Manager, yes it's really just lying). When it finally hangs completely there's still something ticking in IE: it acquires a new handle each second (almost precisely), without releasing. Other progs show zero activity. No CPU, no i/o. 3. [Third installation attempt] Checking Windows Update for what to do. Following directions, I download complete SP3 as single file, reboot, and joy over joys uninstall is invoked automatically and actually works (or seems to!). I turn off network connection, turn off antivirus (AVG), run the thing from downloaded file, and when I return to computer after some time there's Just In Time Debugging reporting some access violation or whatever it was in the install program, i.e. a crash. Checking the update log there are no obvious error codes, but it seems there are more installation attempts than I did explicitly. Uninstall works automatically on reboot this time also, although fucks up connection to USB disk and reports it's unformatted, would I like to format? LOG: First attempt starts with 10.906: In Function GetReleaseSet, line 1211, RegOpenKeyEx failed with error 0x2 10.906: In Function GetReleaseSet, line 1240, RegOpenKeyEx failed with error 0x2 This is repeated some tens of lines below. 104.750: DoInstallation: CleanPFR failed: 0x2 104.766: In Function GetReleaseSet, line 1211, RegOpenKeyEx failed with error 0x2 104.766: In Function GetReleaseSet, line 1240, RegOpenKeyEx failed with error 0x2 Then much further down there's a long list of "failed to query driver path" 159.734: Failed to query DriverPath of ROOT\LEGACY_AFD\0000 0x2 159.734: Failed to query DriverPath of ROOT\LEGACY_BEEP\0000 0x2 159.734: Failed to query DriverPath of ROOT\LEGACY_DICAPI\0000 0x2 159.734: Failed to query DriverPath of ROOT\LEGACY_DIMAINT\0000 0x2 159.734: Failed to query DriverPath of ROOT\LEGACY_DIPORT\0000 0x2 159.734: Failed to query DriverPath of ROOT\LEGACY_DMBOOT\0000 0x2 159.734: Failed to query DriverPath of ROOT\LEGACY_DMLOAD\0000 0x2 159.734: Failed to query DriverPath of ROOT\LEGACY_EMU10K1\0000 0x2 159.734: Failed to query DriverPath of ROOT\LEGACY_FIPS\0000 0x2 159.734: Failed to query DriverPath of ROOT\LEGACY_GPC\0000 0x2 159.734: Failed to query DriverPath of ROOT\LEGACY_HTTP\0000 0x2 159.734: Failed to query DriverPath of ROOT\LEGACY_I2OMGMT\0000 0x2 159.734: Failed to query DriverPath of ROOT\LEGACY_IP6FW\0000 0x2 159.734: Failed to query DriverPath of ROOT\LEGACY_IPNAT\0000 0x2 159.734: Failed to query DriverPath of ROOT\LEGACY_IPSEC\0000 0x2 159.734: Failed to query DriverPath of ROOT\LEGACY_KSECDD\0000 0x2 159.750: Failed to query DriverPath of ROOT\LEGACY_MMC_2K\0000 0x2 159.750: Failed to query DriverPath of ROOT\LEGACY_MNMDD\0000 0x2 159.750: Failed to query DriverPath of ROOT\LEGACY_MOUNTMGR\0000 0x2 159.750: Failed to query DriverPath of ROOT\LEGACY_NAVAP\0000 0x2 159.750: Failed to query DriverPath of ROOT\LEGACY_NDIS\0000 0x2 159.750: Failed to query DriverPath of ROOT\LEGACY_NDISKIO\0000 0x2 159.750: Failed to query DriverPath of ROOT\LEGACY_NDISTAPI\0000 0x2 159.750: Failed to query DriverPath of ROOT\LEGACY_NDISUIO\0000 0x2 159.750: Failed to query DriverPath of ROOT\LEGACY_NDPROXY\0000 0x2 159.750: Failed to query DriverPath of ROOT\LEGACY_NETBT\0000 0x2 159.750: Failed to query DriverPath of ROOT\LEGACY_NULL\0000 0x2 159.750: Failed to query DriverPath of ROOT\LEGACY_PARTMGR\0000 0x2 159.750: Failed to query DriverPath of ROOT\LEGACY_PARVDM\0000 0x2 159.750: Failed to query DriverPath of ROOT\LEGACY_PFMODNT\0000 0x2 159.750: Failed to query DriverPath of ROOT\LEGACY_PGPDISK\0000 0x2 159.750: Failed to query DriverPath of ROOT\LEGACY_PGPMEMLOCK\0000 0x2 159.766: Failed to query DriverPath of ROOT\LEGACY_RASACD\0000 0x2 159.766: Failed to query DriverPath of ROOT\LEGACY_RDPCDD\0000 0x2 159.766: Failed to query DriverPath of ROOT\LEGACY_SFMAN\0000 0x2 159.766: Failed to query DriverPath of ROOT\LEGACY_SYMEVENT\0000 0x2 159.766: Failed to query DriverPath of ROOT\LEGACY_SYMTDI\0000 0x2 159.766: Failed to query DriverPath of ROOT\LEGACY_TCPIP\0000 0x2 159.766: Failed to query DriverPath of ROOT\LEGACY_TCPIP6\0000 0x2 159.766: Failed to query DriverPath of ROOT\LEGACY_VGASAVE\0000 0x2 159.766: Failed to query DriverPath of ROOT\LEGACY_VOLSNAP\0000 0x2 159.766: Failed to query DriverPath of ROOT\LEGACY_WANARP\0000 0x2 180.141: Failed to query DriverPath of USB\VID_0C45&PID_6025\5&384F3D3&0&1 0x2 This is followed directly by 190.484: OEM file scan used 58937 ticks 306.109: c:\windows\system32\drivers\nv4_mini.sys is in the list of oem drivers...skipping copy! 306.594: c:\windows\system32\nv4_disp.dll is in the list of oem drivers...skipping copy! 478.234: AnalyzePhaseOne: used 346687 ticks 478.266: AnalyzeComponents: Hotpatch analysis disabled; skipping. 478.266: AnalyzeComponents: Hotpatching is disabled. 478.281: FindFirstFile c:\windows\$hf_mig$\*.* 481.141: Service Pack 3 Setup encountered an error: The update.ver file is not correct. 481.469: Service Pack 3 Setup encountered an error: The update.ver file is not correct. 481.844: Service Pack 3 Setup encountered an error: The update.ver file is not correct. 481.906: Service Pack 3 Setup encountered an error: The update.ver file is not correct. 482.609: Service Pack 3 Setup encountered an error: The update.ver file is not correct. 483.578: Service Pack 3 Setup encountered an error: The update.ver file is not correct. 483.703: Service Pack 3 Setup encountered an error: The update.ver file is not correct. 484.859: Service Pack 3 Setup encountered an error: The update.ver file is not correct. 485.484: Failed to open c:\windows\$hf_mig$\KB912812\update\updatebr.inf 485.484: Failed to open c:\windows\$hf_mig$\KB916281\update\updatebr.inf 485.500: Failed to open c:\windows\$hf_mig$\KB918899\update\updatebr.inf 485.500: Failed to open c:\windows\$hf_mig$\KB920213\update\updatebr.inf 485.594: Failed to open c:\windows\$hf_mig$\KB924496\update\updatebr.inf 485.688: Failed to open c:\windows\$hf_mig$\KB932168\update\updatebr.inf 485.688: Failed to open c:\windows\$hf_mig$\KB933729\update\updatebr.inf 485.813: Failed to open c:\windows\$hf_mig$\KB943460\update\updatebr.inf The end of that first session (I assume it's the automatic update) is 1208.672: [dumpDownloadTask] Update.exe posting request file to download a total of 47612362 bytes (19742937 bytes in patches and 27869425 bytes in fallbacks) 1208.734: dumpDownloadTask returned 0xf200 (more files to download) 1303.469: UnRegisterSpuninstForRecovery, failed to delete SpRecoverCmdLine value, error 0x2 1303.469: DoInstallation: Failed to unregistering spuninst.exe for recovery. 1303.969: Service Pack 3 installation did not complete. 1303.969: Update.exe extended error code = 0xf200 Next session starts with 14.984: ================================================================================ 15.000: 2008/05/07 02:49:33.859 (local) lacks the "driver path" failures, and ends with 109.375: Service Pack 3 installation did not complete. 109.375: Update.exe extended error code = 0xf201 Next session starts with 15.140: ================================================================================ 15.156: 2008/05/07 03:04:31.062 (local) 15.187: C:\WINDOWS\SoftwareDistribution\Download\dd9ab5193501484cf5e6884fa1d22f9e\update\update.exe (version 6.3.13.0) 15.578: Failed To Enable SE_SHUTDOWN_PRIVILEGE and includes the failed driver paths and update.ver not correct. There's more registry failed stuff: 1034.531: DeRegistering the Uninstall Program -> Windows XP Service Pack 2, 2 1034.625: DeRegistering the Uninstall Program -> Windows XP Service Pack, 0 1044.765: FileInUse:: Detection disabled. 1081.265: Conditional load of section MSN.Block.Condition succeeded 1081.406: CheckRegistryValue: RegOpenKeyEx for SOFTWARE\Microsoft\Active Setup\Installed Components\{FDC11A6F-17D1-48f9-9EA3-9051954BAA24} KeyName failed :0x2 1081.406: CheckRegistryValue: RegOpenKeyEx for System\WPA\Starter KeyName failed :0x2 1094.156: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x2 1094.187: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x2 1094.765: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x2 1095.546: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x2 1095.765: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x2 1095.968: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x0 1096.234: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x0 1096.296: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x0 1096.390: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x0 1096.562: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x2 1096.562: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x0 1096.593: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x0 1096.750: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x0 1096.875: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x2 1097.031: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x0 1097.296: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x0 1097.437: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x0 1097.484: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x2 1428.875: Num Ticks for Backup : 418407 1433.218: Installed AppPatch version is 0005000100000003 1526.906: Num Ticks for creating uninst inf : 98031 1527.046: Registering Uninstall Program for -> Windows XP Service Pack, Service Pack 3 , 0x0 1541.093: Conditional load of section MSN.Block.Condition succeeded 1541.093: CheckRegistryValue: RegOpenKeyEx for SOFTWARE\Microsoft\Active Setup\Installed Components\{FDC11A6F-17D1-48f9-9EA3-9051954BAA24} KeyName failed :0x2 1541.093: CheckRegistryValue: RegOpenKeyEx for System\WPA\Starter KeyName failed :0x2 It copies a lot of files. But I'm not sure if this is an uninstall or what. The log could be more clear. After above continues with even more sections. -- A: Because it messes up the order in which people normally read text. Q: Why is it such a bad thing? A: Top-posting. Q: What is the most annoying thing on usenet and in e-mail? Tag: KB940510 UPDATE Tag: 254663
  - 18
    - Service Pack 3 Failure After Installing Service Pack 3 for Windows XP on my HP Pavilion 1510n Media Computer, I cannot start Windows. It keeps rebooting repeatedly if I choose to start it normally, and Last Known Good Configuration does not work. How can I get rid of Service Pack 3? Tag: KB940510 UPDATE Tag: 254653
  - 19
    - How to get SP3 on CD ??? When click on "...order SP3 on CD" at... http://www.update.microsoft.com/microsoftupdate/v6/default.aspx?ln=en-us ... there seems to be no direction for how to request the CD. Suggestions ??? -- akm Thanks again for your help. ---- Ah, the miracle of computers!... someone also said "To error is human, but to really screw up it takes a computer!" Tag: KB940510 UPDATE Tag: 254652
  - 20
    - Problem with install XP SP3 Hello When I install SP3 do XP i Have big problem. In the moment "Checking space for installation" i Have error not enough space please add 4Mb more. Actually I Have 50GB free space. After installation I see error 0x8007F003 Please Help me. Tag: KB940510 UPDATE Tag: 254648
  - 21
    - All Microsoft updates fail After a recent software error i needed to reinstall Windows XP. After the inital install, I begin to use MS update, but shortly after i install IE7 i can no longer use MS update. the files download but when installing it fails without an error code. Install XP with SP2 from CD Install Symantec Endpoint Protection 11 Install wireless driver Install MS update (over windows update) and Genuine advantage and other items that are required to access MS update Install SP3 Install all other critical updates (IE 7) Install updates to IE 7 All further updates fail, and removing the last update, IE7 and Symantec do nothing except stopping me to upgrading back to IE7. I'm going to go and do a reinstall without symantec now, so with the exception of the wireless drivers all the software will be MS, trying to narrow down where the issue is. If anyone has come across the issue before or knows of a fix i would most appreciate it. Tag: KB940510 UPDATE Tag: 254645
  - 22
    - Still cannot hide updates. I followed your directions on hiding updates in xp but when I clicked on the download all it does is change from a + to a - sign, I don't know what you mean by expand, when I expand mine all is does is gives me details about the download. I want to hide the SP3. I am not installing that thing. Can you give me instructions again about how to hide the download. The ones that you gave before to someone does not work for me. thanks Tag: KB940510 UPDATE Tag: 254643
  - 23
    - Fehlernummer: 0x80072EE2 hello i have a new problem now i have make the indication on the website microsoft for the problem with sp3 for winxp but now i have a new problem with the website microsoft update; I had this sentence which appeared when I wanted to use the service update of Microsoft somebody can it come me has the assistance!!! Tag: KB940510 UPDATE Tag: 254642
  - 24
    - Update installation failures Yesterday I had to reinstall Windows XP. I updated it via SP3. However, Windows subsequently discovered a number of additional updates. I have tried to install the following updates three times without success. Realtek AC'97 Audio Microsoft Windows XP _________________________ Windows Malicious Software Removal Tool - April 2008 (KB890830) Microsoft .NET Framework 1.1 Service Pack 1 Windows Internet Explorer 7 for Windows XP There was no error code. Can someone help me with this? Tag: KB940510 UPDATE Tag: 254634
  - 25
    - SP3 Error code Ox80072EFE SP3 will download but not install. Error code 0x80072EFE any ideas what this means? Am using XP Home Edition with Windows OneCare as anti Virus. Tag: KB940510 UPDATE Tag: 254631

Just install KB940510 update on my sony vaio vgn FZ21E Vista Homme premium.
Windows media no more working and also my network interface.
impossible to uninstall KB940510 and restore do nothing.
How to fix it, wait for an another update or reinstall the system.

Top

RE: KB940510 UPDATE by fox

fox
Thu May 08 09:24:08 PDT 2008

I do have also many VAIO software no more working like VAIO UPDATE, VAIO
online help, â?¦
help is needed !

"fox" wrote:

> Just install KB940510 update on my sony vaio vgn FZ21E Vista Homme premium.
> Windows media no more working and also my network interface.
> impossible to uninstall KB940510 and restore do nothing.
> How to fix it, wait for an another update or reinstall the system.

Top