wmi and resetiing DTC log
Hi guys,
i nedd reset a dtc log through a WMI or VBS script.
How i can do it ?
Thanks in advance Tag: how to view event trace log files(.etl) ? Tag: 114856
w2k3 as a domain 2000 mixed
Hi friends, I've seem that here in my job we have a w2k3 server but the
domain is "w2000 mixed" .... should I promote it to a w2k3 domain? why
should I? which benefit offer this?
thanks friends
HB Tag: how to view event trace log files(.etl) ? Tag: 114847
install new replica DC
Hi friends, can you recomend me a link where I can find "best practice" in
installing a new w2k3 server to act as new replica DC for a existing domain
with only 1 DC....?
thanks friends
HB Tag: how to view event trace log files(.etl) ? Tag: 114846
Open as Web Folder
In Internet explorer 7 I can File:Open then open a web site in "Open as Web
Folder" mode.
Can someone please tell me what procol is being used for that connection.
Thanks Fred Tag: how to view event trace log files(.etl) ? Tag: 114842
Error code 0x80070035 - The network path was not found
We recently purchased a pair of new servers and installed Windows Web Server
2008 on them.
During the initial setup of the servers I was able to copy data back and
forth from the existing 2003 Web Edition server and our 2003 R2 file server.
Once I had all the data I needed on one of the 2008 servers I put them both
on the DMZ and configured them identically. When it was time to transfer the
data (C:\inetpub), or even browse, from one server to the other I was unable
to do so. As I said before the servers are identical, the same users and
shares on each, both are members of a workgroup called DMZ.
The error message:
Title Bar â?? Network Error
Windows cannot access \\servername
Check the spelling of the name. Otherwise, there might be a problem with
your network. To try to identify and resolve network problems, click
diagnose.
Details:
Error code 0x80070035
The network path was not found.
If I click the â??Diagnoseâ?? button it tells me it canâ??t be repaired
automatically. This happens in both directions, server1 to server2 and
server2 to server1. Going from memory here is what I have tried so far making
one change at a time, I think:
â?¢ I can ping each server from the other
â?¢ I can use â??webemtestâ?? to authenticate and connect from server1 to server2
and server2 to server1
â?¢ The Windows Firewall service has been disabled on both servers
â?¢ Disabled UAC, this has been turned back on at this point
â?¢ Set both servers to use LM & NTLM â?? use NTLMv2 session security if
negotiated
â?¢ The workgroup DMZ has been set to be a private network on both servers but
changed back to public once and awhile, I think when other Network and
Sharing Center features are turned on or off
â?¢ Network and Sharing Center - Network discovery, file sharing, and password
protected sharing are all turned on, printer sharing is not because I am
unable to turn it on. Each time I try it resets itself to off after I click
apply (Web edition limitation â?? no print services?).
â?¢ File and printer sharing is enabled on the NIC
â?¢ Each server has a static IP, these are different of course
â?¢ I added records to the host file since DNS isnâ??t an option on Server 2008
Web Edition.
There may be more but I canâ??t think of it right now. I tried everything I
can think of short of calling Microsoft. Is this some type of limitation
imposed by Microsoft? I know the web edition is supposed to be scaled down
but seriously?! Do I need to run files to our web server with a USB stick
every time I want to update a web page?
Thoughts?
--
Jeremy Tag: how to view event trace log files(.etl) ? Tag: 114840
Does Hyper-V need shared disk
I need to set up a lab but don't have SAN. In the past I have been using MS
VM. Since Hyper-V RC is available can I use it without SAN?
Thanks. Tag: how to view event trace log files(.etl) ? Tag: 114839
Home directory maintenance
We have 60 teachers in AD each is assigned a home folder where my documents
lives.
How can I delete the home folder when a teacher leaves the school? Tag: how to view event trace log files(.etl) ? Tag: 114833
File access auditing
Server 2000 SP4 running AD.
I have read many posts about how to log file and folder
access, but it doesn't seem to work. I've enabled auditing
of object access in a group policy on the domain controller.
I've changed the properties of the folder to be audited and
added the groups to audit and what's to be audited.
Nothing shows up in the security event viewer when files
are accessed, changed, added or deleted.
It's got to be something I've overlooked.
Can anyone steer me in the right direction?
--
Jordon Tag: how to view event trace log files(.etl) ? Tag: 114827
Automatic Updates options are all grey out for the for all the DCs
Hi, Everyone,
There is a weird thing happened to all the domain controller computers (all
Windows server 2003 std) in our company. I have not noticed when exactly this
started. It seems that the Automatic Updates options at our domain
controllers are grey out. I used to check "Notify me but don't automatically
download or install them" because i don't feel comfortable if i just let the
updates automatically install to the domain controllers. But recently i
noticed the all domain controllers just do the automatic updates and I am
not able to change this settings because all the options at Automatic Updates
(from Control Panel) are grey out.
I checked the default domain group policy, all shows not cofigured for the
windows updates. No other group policy linked to the domain controller OU. It
seems this started to happen when I load some Windows critical updates to the
servers couple of months ago.
Does anyone know how to troubleshoot this or at leasts point me to the
correct direction to check?
Thank you very much for any help from you guys.
John Tag: how to view event trace log files(.etl) ? Tag: 114825
Volume shadow service
Hi,
I wanted to find out ... ideally in a microsoft windows 2003 network
consisting of ISA Server 2004, Exchange 2003, domain controller, file server
and sql server 2000 - what should one VSS?
At the moment we are only using VSS on the file servers.
Are their any other servers that one should VSS as per best practicses?
Thanks Tag: how to view event trace log files(.etl) ? Tag: 114823
Backup Exec not talking to VSS on Windows Server 2003 R2
Hello all,
I am not really sure where to put this thread so here goes.
I have come into a company where they are having a problem backing up
one of
the domain controllers. I am seeing an error message ID# 13, Source:
VSS. It
is showing a username in the registry that is no longer valid. When I
go to
the properties of VSS it is showing to use the System account. My
problem is
this: 2 DC's, one getting a successful backup and the other is not.
Both have
the same error message, and both are configured the same from what I
can see.
Can someone help me with this issue? This is getting to be very
confusing.
Thank you in advance for all of your help. Tag: how to view event trace log files(.etl) ? Tag: 114820
Username and Password greyed out
Here's one I've never run across before. I have a Windows 2003/SP2 domain
controller that I remotely manage via logmein IT-Reach. The client called
and said they couldn't log into the machine locally because the username and
password boxes were greyed out. I tried to log in via logmein IT-Reach. I
got the same thing. Straight RDP, same thing from both inside and outside the
network. I'm not finding much on the net about it. This is the only server
on this segment. Running AD, F&P, App, DNS, DHCP. I was hoping someone here
has seen this before. The only solution I've found so far is to do a
cold-start.
TIA
Jon Tag: how to view event trace log files(.etl) ? Tag: 114819
Determining AD account signed in in Domain
How can I determine if an account is signed in on a Windows 2003 domain? I
would not know what computer the account signed on and I would like to find a
procedure to determine what computer the account is signed on. Is this
possible?
--
Greg Tag: how to view event trace log files(.etl) ? Tag: 114818
Perflib error
Hello All,
I encountered a problem every time I tried to start the performance
counter(We had a customized counter), the error message said the
counter could not be started, asked me to refresh, check the log or
reinstall, checked the log, error 1015 - Perflib found. Somehing
related with the performance counter timeout...any one knows how to
solve this problem and make the counter run again?
OS: Win2000 Server
Thanks !
Ben Tag: how to view event trace log files(.etl) ? Tag: 114817
CALs on DC replica
Hi friends, we have a W2k3 server installed from a "ilegal cd from the
street", I mean, without purchased license (bad work from the last IT mgr) ,
since I´m working here I already purchase a new legal License of W2k3 R2 with
40 CALs and I´m planning to install it on a new server to act as DC replica
of the existing domain.
My question is: when I configure the new server as DC replica, what happend
with my CALs legaly buyed? all the clients will work without problems? Tag: how to view event trace log files(.etl) ? Tag: 114814
Clients lose WServer 2003 connection every afternoon
Our network seems to be running fine, except that any clients still attached
to the server (Windows 2003 SBS on a dual Xeon platform) around 6:00 PM
locally lose access to the server. This means they cannot save their work or
contact our time card system. The network was set up in late March and we
have had no trouble. This has started recently, probably within the last
three weeks. There have been no changes made to the network, policies, rights
or such since early April.
Any and all help would be appreciated. Tag: how to view event trace log files(.etl) ? Tag: 114812
Touble with deleting a folder under Profiles (Roaming)
I cannot delete the user folder under profiles.
I have removed the user and see no other connection to the user.
How do I delete it?
thx Tag: how to view event trace log files(.etl) ? Tag: 114809
renaming of computers
I have about 80-100 machines, mix of windows XP and professional (PCs and
thin clients) and want to change the computer name on all of them. Is there
a easy way to do that instead of individually changing and would it create
any problem?
They are on Windows 2003 sever. Tag: how to view event trace log files(.etl) ? Tag: 114807
How to backup network printers
Hi All,
I'm trying to find a way to backup and restore the network printer
settings for a server I have to reinstall.
I found PrintMig from MS but it seems it backup\restore only the
settings for local printers and not for network ones.
Does anybody have an idea about that?
Thank you very much Tag: how to view event trace log files(.etl) ? Tag: 114806
New server and Exchange 2007
I am looking to put a new Domain Controller onto my network and am looking
for advice/tutorials/step by step instructions even to add teh server and
transfer all teh jobs from it to the new one i.e. DHCP, DNS etc.
I am also looking to put a new Exchange 2007 box in to replace my current
Exchange 2003 box. I am looking for specs for the server and for the best
method of setting it up and transferring mailboxes etc to it.
Once these jobs are both done, I need to completely remove the 2 current
servers from teh domain. Again, I need some instructions on this as well.
TIA
--
ats@jbex
All the power's in the hands
Of people rich enough to buy it
While we walk the street
Too chicken to even try it
The Clash - White Riot Tag: how to view event trace log files(.etl) ? Tag: 114805
Diskmanagement does not show drive letter
Hi,
Got a problemem with mounting drives on an windows 2003 Enterprise server SP2.
After mounting a disk from a san the windows server does not show a drive
letter to the mounted disk. Windows explorer does show a drive letter,
windows command does show a drive letter but under windows disk management
there is no drive letter assigned to the disk.
If you want to add a drive letter to the disk it gives a error, but in you
got to the explorer of command prompt you can browse to the folder and files.
After a server reset a drive letter is assigned and is working fine.
The reason why restating is not an option is that the mounted disk must be
available for the backup. So restarting the server several times a night is
not really a solution.
Anybody an idea why windows is behaving like this, and even more important
is there a know solution to it beside restarting the server.
Thanks Tag: how to view event trace log files(.etl) ? Tag: 114801
Windows Server 2008 Backup on more external HDD
Hi,
I try to use windows server 2008 backup - I have problem with backup on two
external HDD. I set up backup with no problem by wizard. Then when back
start - windows start two jobs but one failed because another was start.
How set windows backup for backup on more external disk in one time?
Peter Tag: how to view event trace log files(.etl) ? Tag: 114799
NTBackup - The device reported an error on a request to write data to media.
Hi,
I'm having some problems with NTBackup. We currently have 5 servers which we
have two NTBackup jobs set-up on each server. One backup job for each server
is for backing up system state. The next backup job which runs after that
backs up the files and then the system state backup.
The problem that I am getting is that on some days the backups on different
servers fail, its currently random as to which backup will fail and on what
day. When they fail the error log always contains the following:
Error: The device reported an error on a request to write data to media.
Error reported: Unknown error.
Then if it was an exchange backup
Error: SERVER\Microsoft Information Store\First Storage Group is not a valid
drive, or you do not have access.
If it was a file backup (the drive letter will change depending on where the
files are being backed up.
Error: E: is not a valid drive, or you do not have access.
If I go and run that schedule task again it will succeed. Because the
backups can run perfectly I think that the error which is being reported is
not correct because obviously the drives are accessible. What I'm thinking
it could be (I'm guessing here) is that maybe this is the error that you get
when doing a backup across the network and maybe the network connection
drops out for a second.
I really need to get this sorted and working, does anyone have any ideas on
what I should do here?
Cheers
Damon Tag: how to view event trace log files(.etl) ? Tag: 114788
Bare Metal Domain Controller Migration
Hello,
We have a domain controller running on a dell 2850 server which we want to
migrate to a new piece of hardware. This machine is a domain controller,
smtp server and DNS server. For a host of reasons we need the new hardware
to run a domain controller with the same name and same IP address as the
currently running domain cotroller. We have started to investigate products
from Symantec, PlateSpin and Altiris. One of the reasons we feel like we
need to look at such products is that we don't feel like the server can be
down for an extended period of time. To do this manually would require
demoting from the domain, changing the name, IP, etc. Then Bringing up new
server, promoting to DC, configuring smtp, etc. This would take a long time
if it went smoothly with no problems. Any advice you might suggest or
vendors that would be helpful would be much appreciated.
Thanks. Tag: how to view event trace log files(.etl) ? Tag: 114785
Intel Quad Core CPU
Hi
Can I assume that the power of an Intel Core 2 Quad Q6600 2.4 GHz is
equivalent with four 2.4 GHz CPU? Faster? Slower?
It would be great if there is a bench mark that compares a quad core CPU
with four SMB CPUs.
Thank you,
Max Tag: how to view event trace log files(.etl) ? Tag: 114783
How can I confirm I can access an NTP server
Greetings,
I really would like to see a 593 event showing up in the system log, that to
me would be positive confirmation. I have bounced the time service, done a
w32tm -s (it's a 2000 box), and the /querysntp returns the correct value.
My 11 warnings have stopped, but I would feel better if I got some "positive
feedback" so I know the new time server is actually working for these
servers. On one of my servers, I got a 593 shortly after bouncing the
service, and this one has the Update Rollup for SP4 installed, the other two
servers don't and they don't get the 593 after bouncing the services. I
don't know if this make's a difference. If anyone has any information on
this topic it would be most appreciated.
Thanks! Tag: how to view event trace log files(.etl) ? Tag: 114776
Do we have internet connector licence for windows 2008?
Hi,
Do we have internet connector license for windows 2008? Is there any online
Microsoft resource that explains windows 2008 internet connector license
Thanks.Max Tag: how to view event trace log files(.etl) ? Tag: 114766
"replacing invalid security ID" message leads to an hours-long scan on startup, how to fix?
I have a 2003 Windows Server server that on startup starts an hours-long
scan of the filesystem saying: "replacing invalid security id with default
security id..."
I think this might have resulted from an automatic RAID rebuild of the disk,
though I am not certain. The files behave normally once I abort the scan.
I am wondering how I can fix this while the server has Windows loaded up. I
don't want the server offline for hours and hours. The server is local to me
and I have full administrator rights on and total control over the system.
Ideas?
Thank you,
-KF Tag: how to view event trace log files(.etl) ? Tag: 114765
Multiple Connections for Mapped Drives
I have situation at a site where we have login scripts mapping a "home"
folder for users that create a "W:" . This mapping seems to lock access back
to the server when I try to access the server with the administrator account
while still being logged on as the user on the local machine. As soon as I
disconnect the "w:" I can then authenticate to the server as administrator.
Steps I have taken:
1.) reset permissions on the users shared home folder.
2.) deleted local profile
3.) checked "open shares" on server to make sure the account does not
already have a file or directory open or locked.
There are 7 or 8 other mapped drives in the users profile. And only when I
delete this one does it allow me to authenticate to the server as
administrator
Any help would be useful. Tag: how to view event trace log files(.etl) ? Tag: 114760
Audit logon fail
Hello, We have a service account that blocked continously but we unknow what
server and service have this acount.
How I config the audit in domain to look this server and service?
Thanks. Tag: how to view event trace log files(.etl) ? Tag: 114758
Print Server Sizing/Best Practice
Hello,
We are moving from Novell (NDPS) print servers and LPR printers to Windows
print servers. Since I haven't configured such an environment before, I have
begun researching my options and thought I would post here as well. I'm
familiar with how to configure a print server I but I want to make sure it's
appropriate for our larger environment.
AD running on Win2k but will soon be 2003 R2 or 2008.
1,300 users
1,100 xp machines
20 or so HP LaserJets on the network
Roughly 65 Xerox network multi-function printers that are managed by Xerox
Managed Services.
I just want to make sure that performance does not suffer and that
reliability and redundancy can be achieved. We probably don't need instant
fail-over but I would say it's acceptable if the users can't print for an
hour or two (mgmt. is getting this together soon.) Deployment is up to the
Workstation team/Xerox but I'll be working closely with them and would really
like to automate it as much as possible. GPO, Con2Prnt, rundll32, etc.....
I was thinking of using VM's on our SAN so we could utilize VMotion and HA.
Maybe even use some VM's and a physical box as well. I was hoping there was a
way to print to a group of servers or something like a cluster. I don't think
we will be able to create a true cluster as I've never done this before and
we would have to purchase additional hardware but it's not out of the
question.
I'll be researching this but I would appreciate any advice!
Thanks, Tag: how to view event trace log files(.etl) ? Tag: 114754
Will we see an SP3 for Server 2003?
I have had a look around the Internet but so far cannot see any mention of
the likelihood of a Service Pack 3 for Server 2003. SP3 for XP finally
arrived so I thought it would appear for Server 2003 soon afterwards.
Anyone heard anything? Tag: how to view event trace log files(.etl) ? Tag: 114748
offline files not available for one server
Hello
We have 1 windows appliance server where all of the shares do Not give the
user the option to make available offline.
is this a server end setting? I have set GP to allow offline for users.
any clues appreciated
carl Tag: how to view event trace log files(.etl) ? Tag: 114746
2 Q's
HY,
1st, we have about 8 pc's in company, most of them on win xp home. Some of
them have to map disk on server every day. How can we make them maped all
the time.
2nd, our server is supposed to copy disk c: to disk which I cant see, so in
case of trouble we just change disk's . If it does do I have to see the
second disk or not, until change?
Hope you understand my Q...
M M-N Tag: how to view event trace log files(.etl) ? Tag: 114743
don't see task scheduler running in server 2003
I noticed that my scheduled Symantec Antivirus CE scans were not running when
they were supposed to these last 5 days
I read this may be a problem with the task scheduler not running
I open services.msc and see the task scheduler has status of started but
when I look in the task manager, I do not see svchost.exe in the processes
tab. Shouldn't this be running? If I go to services.msc and restart the
task scheduler, I still do not see svchost.exe running in the processes tab
of the task manager. I am using windows server 2003 service pack 2. Tag: how to view event trace log files(.etl) ? Tag: 114742
pre-authentication failure
I have a user whose account was locked because of preauthentication failure
and his failure code was 0x18 which is normally a bad password. What does bad
password mean? Does it mean wrong password. Moreover my user's account was
locked when he was already log on to his machine. His pc did not save any
other user password under user management. Pls advise why his account was
locked, thks in advance. Tag: how to view event trace log files(.etl) ? Tag: 114740
best practise group structrure
lads, i am going to design a new site.( several servrs). i am looking for
microsoft best practise for the group desgin(local,global,...). someone an
idea about this? thanks. Tag: how to view event trace log files(.etl) ? Tag: 114733
mail server problems
Apologies in advance for being something of a novice!
I'm attempting to install the communigate pro mail server on my
windows 2003 server vps.. It all went smoothly apart from the webmail
service. For some reason, even though the http user port (8100) is
open listening, I can't get any external connections through. I can
connect to the webmail service fine locally. Likewise, all other http
services of the mail server, admin etc. work fine locally, but not
from the internet.
But I can connect to the mail server fine through pop3 methods etc.
over the internet and it's relaying mail fine through smtp.
I've tried disabling the firewall and IPSec to no avail.. so I can't
understand what's blocking access to the thing! After attempting to
fix it for about 2 days now I think I need help ;-)
Would really appreciate somebody pointing me in the right direction.
Cheers,
David Tag: how to view event trace log files(.etl) ? Tag: 114731
Windows 2008 Server - cannot copy files from server to another machine; reverse works ok
Hi!
My Windows 2008 Server started acting up on me all of a sudden.
Every time I try to copy a larger file from it to a network share on another
machine, it freezes, reporting that the local file I am trying to copy
cannot be found ("Item Not Found" error dialog", or that there is a network
error accessing the local (!)file. Sometimes the copy works a bit at the
beginning, then the speed crumbles to < 10KB/sec, and the errors pop up.
All machines are in a Windows 2003 AD, the 2008 box is a workstation, not a
dc server.
I managed to disable all advanced tcp features (RSS, Chimney offload,
receive windows tuning, congestion control), and now I can at least transfer
files to a Windows 2003 server (slow; 4MB/sec). Transfering to vista x64
(also with modified txp features) still doesn't work.
What's funny is that going in the oposite direction - putting the files onto
the windows 2008 server box - works without a hitch. From the Vista box it
goes with cca. 11 MB/sec.
Any hints on how to fix this? The 2008 Server is my primary development
workstation and this is a *major* pain.
Thanks & Best Regards,
Sigmund Tag: how to view event trace log files(.etl) ? Tag: 114729
Want to delete print job, but access is denied
Hi,
When regular w2003 domain clients want to erase one or all print jobs on
their local printer they get an 'Access is denied' message. How can
they erase local print jobs without logging in as local admins...?
Also they have experienced problems when trying to delete large print
jobs sent to a network printer. Do they have to be members of the print
administrators group in one or both cases above...?
jake Tag: how to view event trace log files(.etl) ? Tag: 114727
Date of folder and files not correct
We have a small problem.
When we upload folders or files to our server the date of timestamp what
ever you want to call it, will have a date / time in the future. This doesn't
happen to all the files.
Does anybody know what we can do about this?
Maarten M. Tag: how to view event trace log files(.etl) ? Tag: 114726
Map a range a port to a computer in server 2003
I've set up a home server, which acts as a router by using the Routing and
Remote Access tool in Windows Server 2003.
It works fine, but yesterday my brother told me that he wanted to host an
AOC game, so I need to map a bunch of ports (like TCP Ports 28800-29000) to
his computer.
In Routing and Remote Access tool, I can just map these port one by one. But
there are 200 ports in this case! So what can I do to map these ports
efficiently.
Thank you very much. Tag: how to view event trace log files(.etl) ? Tag: 114725
Block IP addresses: Windows 2003 server
Hi, I have around 120 IP Addresses I want to block from my Webserver
(Windows 2003 server). I assumed that I could just do it nice and
easily much like APF firewall in Linux by pasting the ip addresses
into a text file....
After spending the last few hours looking all over the Internet I
cannot for the life of me find a nice easy way program to basically
say..
"If the request is from this ip address deny it"
I looked at using ZoneAlarm but people said it was not compatible with
Windows 2003 Server.
Any recommendations about how I can this more then welcome.
Thanks
Markus Tag: how to view event trace log files(.etl) ? Tag: 114724
At least one service or driver failed during system startup
After a DC in Windows 2003 domain started, a popup window shows up:
"At least one service or driver failed during system startup. ..."
I checked Apps Event log and found the error "The Kerberos Key Distribution
Center service hung on starting". However, all the automated-start services
have started including this one. Why this window popup? Is it possible there
is some manual-start service not start? If it is not, how to stop this window
poping-up? Thanks. Tag: how to view event trace log files(.etl) ? Tag: 114721
Server Hangs
Greetings,
My Win2K3 SP1 domain controller locks up every day and I have not been able
to find a reason for the lock-up. The Event Viewer shows no errors and no
STOP errors are generated. The controller simply does not respond to
keyboard, mouse, or network communication, requiring a reset to bring it
back up. When it does reboot, there is no indication that anything went
wrong. This started occurring shortly after I implemented a software mirror
on my C:\ drive (boot drive). In fact, after rebooting, the mirror always
resynchs. Could it be that there is an issue with the software mirror?
Short of breaking the mirror, are there any diagnostics that I could run?
If the mirror is the cause, what could be leading up to the lock up? Could
a bad drive in the mirror array (there are two) cause a lock-up?
The computer is not overheating and there are no exclamation points in the
Device Manager display. After rebooting, the mirror resynchs without error
and the system hums along fine until the next lock-up. No dump files are
generated. Are there any monitoring tools that I can run to audit the
machine activity so that I could review a log file after rebooting from a
lock-up?
Please - any help is very much appreciated. Thank you in advance.
--
=================================================================
William Schroeder, MCSD, CIDD
Email: william@fanatical.us Tag: how to view event trace log files(.etl) ? Tag: 114718
EARN DOLLARS 100% HOME BASED BUSINESS
HI I AM DOING HOME BASED BUSINESS WITH PART TIME I AM GETTING GOOD
EARNING DAILY MINIMUM OF THE PAYMENT WEAKLY $100 JUST CLICK HERE YOU
DEFIANTLY YOU WILL WON .WOW!! Get seen -- get paid! You can now get
paid to drive your car, wear T-shirts, and more! Just join the EyeEarn
Advertising Network and start earning money effortlessly while you go
about your day! It's fun, easy, and no experience is necessary!
http://www.eyeearn.com/10122618/signup Tag: how to view event trace log files(.etl) ? Tag: 114715
How to install a windows 2008 in a Hyper-v enviroiment
Hello friends
I tried to install a windows 2008 in a hyper-v server.
The VM settings are this:
512 Mb Ram
SCSI Controller
SCSI Disk
When I try to install, the wizard tellme have no disk to install, how I
install this Disk Controller??
The version of Hyper-V is RC1 (6.0.6001.18010)
thanks, and sorry for my english. Tag: how to view event trace log files(.etl) ? Tag: 114712
Messages about corrupt files
I get some weird messages about corrupt files when making a backup of files
on a network location.
I am using DFS. The files are on a virtual location with two domain
controllers hosting this location. The files are also replicated to two
folders. When backing up throught the network location I get error messages
about some files being corrupted. When backing up the same files from one of
the folders locally the backup works fine.
System w2003. The problem happens as well as making backups on a 2003 server
as well as on an XP Professional workstation.
Please advise. Tag: how to view event trace log files(.etl) ? Tag: 114708
How to view event trace log files.
event trace log files are created by trace logs of peformance logs .