Windows Fax in Win Server 2003
I was using Windows Fax on my terminal server running Win 2003 Server. It
worked OK for years and I would route the incoming faxes to a folder on the
network. Recently there were lines missing on each received fax so I tried
to install a new fax program that would allow me to make flow control
changes, unlike the Windows fax program/service. The new program didnâ??t work
at all so I reinstalled Windows fax except now I cannot route the received
faxes to the old folder that used to receive them or any other folder for
that matter, regardless of their permissions. When I try to set the routing
up in the configuration wizard or directly in the device properties, I get
the following error message: The FaxService cannot access the folder
specified. This didnâ??t happen in the past and Iâ??m pulling my hair out trying
to figure out how to correct it. I have this problem regardless of whether
Iâ??m logged on as the network administrator or the local computer
administrator. Please help.
Also, where is the inbox folder located on the computer? Tag: see my web. very interesting Tag: 116179
xp ftp behind stock SBserver 2003 works ONCE after xp reboot...
multiple XP Pro stations going through an SBS2003 box, internet works
fine.
However, if one ftp's from an XP box to an external site, it will Only
work after the
xp box is rebooted, and ONLY the first time - every subsequent ftp
immediately gets connection closed. If i turn on the ftp service on
SBS2003,
then of course ftp works fine, but only to the server, not to the
outside
world. I'm at a loss to explain this behavior - can anyone offer a
guess as
to whether the problem lies on the XPP boxes, or on the SBS2003
box??? It
seems it must be the SBS2003 box, as the connection to external sites
does
actually work the one time... And please, no debate about using ftp -
the real
problem is a program that uses ftp in the background, so ftp Must
work! And no,
rebooting the box each time won't work, because the program first does
a test
connection when it starts (which works) then it goes to the main
screen, re-opens
an ftp connection to send the real data, which fails... Lovely, eh? Tag: see my web. very interesting Tag: 116176
View actual server display
I am using Remote Desktop to connect into our server. However, I cannot see
any windows that are popped up on the server display. We have a scheduled
task that runs a process and if that process fails it leaves a pop-up error
message window that I can only see by going to the server and looking at the
display.
Is there any way to see exactly what is showing on the server display so
that I can close the pop-up window from my desktop? Thanks.
David Tag: see my web. very interesting Tag: 116167
Icon's changing location on desktop after copying profile
Hello,
When I copy a created profile to the default user profile on Vista the icon
locations on the desktop change. Everything works great, just the icons are
moved. Does anyone know how to make the icons stay where they were set?
Thanks. Tag: see my web. very interesting Tag: 116164
recovery process?
What's the basic recovery method for the following scenario?
1) Windows Server 2003 Standard (runnign purely as the single network domain
controller)
2) A small 15-user network, single domain
3) Have a good "system state" backup available from ntbackup
4) Hard drive failed / server crash.
Recovery method???...
1) Replace failed hard drive
2) Reinstall Windows 2003 Standard fresh
3) Run restore of "system state" backup?
Any glaring gotchyas to be aware of?
- anthonyx26 Tag: see my web. very interesting Tag: 116160
DC Changes time
I have a 2008 server that is a DC. It also is the PDC master. Everyday at
9:00am the server rests the time back by 28 minutes. I have it configured to
get the time from the US Navy's NTP server. Because this is a PDc the whole
domain get the time from this server. Tag: see my web. very interesting Tag: 116150
mbr to gpt disks
We have to expand our disk space on our file server, we are running out of
disk space. Unfortunately to do so would go over 2 tb so we have to convert
from mbr to gpt. I thought this would be seamless, i.e add the disks in raid
the go into windows disk manager and convert.
To my horror according to microsoft you have to delete the partition then
convert to gpt then you have to go through the hassle of restoring your
data. Is there any way of doing this without have to delete data and
restore? Tag: see my web. very interesting Tag: 116128
windows 2008 server and .net 3.5 framework language pack problem
I have a problem and I can't find any help in whole internet search
I can install .net framework 3.5 language pack (Turkish or French what ever)
succesfuly on windows server 2008, but when user select the culture, asp.net
controls can't render in this culture language.
same application and same language pack, windows 2003 has no problem
how can I enable .net lang pack on windows 2008.
can anyone guide me when can I find the solution
thank you Tag: see my web. very interesting Tag: 116126
32bit / 64bit
I see we can buy Standard OR Enterprise versions.
In each version can we choose to install as a 32bit or 64bit installation?
In other words both Standard and Enterprise versions contain BOTH 32bit and
64bit installations? Tag: see my web. very interesting Tag: 116124
replica fendi chanel prada lv d&g versace dior armani sunglasses for
Discount Coach Sandals, Dior Sandals, Prada Sandals, Chanel Sandals,
Versace Sandals, Crocs Sandals, LV Sandals, ( G U C C I ) Sandals, UGG
Sandals, Burberry Sandals, Women's Sandals Men's Slippers From
China
Discount, Prada Sunglasses, Discount, D&G Sunglasses, Discount, Fendi
Sunglasses,Discount,Burberry Sunglasses Discount, Chanel Sunglasses
Discount, LVSunglasses Discount, Dior Sunglasses Discount, (G U C C
I ) Sunglasses Discount, ArmaniSunglasses Discount, Versace
SunglassesDiscount, A&F Sunglasses Discount, LV Sunglasses
For more AAA products pls visit:
http://groups.google.com/group/rec.music.opera/browse_thread/thread/30cd1ce52968c9fc/a9ff553f65becc4c?hl=en&lnk=st&q=discount+edhardy+t-shirts#a9ff553f65becc4c Tag: see my web. very interesting Tag: 116122
Programs to Backup DHCP, Active Directory, Registry, Etc
Aside from doing a full system state backup, does anyone know of a program
that would maintain a full set of Daily / Weekly / Monthly backups the
Windows DHCP, Active Directory, and Registry? I realize it is not brain
surgery to write it yourself, but I would value having some high quality
commercial software for such an undertaking as well, mainly for error
checking and notifications about failures to backup files.
--
Will Tag: see my web. very interesting Tag: 116119
Share/NTFS Permissions - grant more rights further down the tree
Can someone please assist to help me achieve this?
I have a folder structure similar to this
-\Shared\Data1\Data2
I have 2 groups of people
Everybody
Admins
I need to achieve the following permissions to these folders for these groups
Data1 - Everybody=R; Admins=C
Data2 - Everybody=C; Admins=C
Now, I can easily achieve rights for Everybody by granting 'C' permissions
to 'Share' for the 'Everyone' group; assigning 'R' perms to 'Data1' for
'Everyone and 'C' perms to 'Data2'.
And for Admins, I have granted 'C' perms to the 'Share' for the 'Admins'
group; assigned 'C' perms to both 'Data1' and 'Data2' for 'Admins'.
Testing shows that the permissions for Everybody works as intended, but the
permissions for Admin follow the security of Everybody and they have only 'R'
perms to 'Data1'.
Now I suspect that this is to do with the fact that Admins are members of
both the 'Everyone' and 'Admins' groups. I'd appreciate confirmation of this
from someone who knows for sure.
I'd also appreciate any suggestions you may have for how I can achieve the
above. Tag: see my web. very interesting Tag: 116117
question about group policy in server 2003
Dear all,
I have 2 questions about group policy:
1. Are there any policy or method to prevent access only part of folder in C
drive but not the whole C drive.
2. How to block some specific websites through server 2003 by using group
policy? I have already listed the websites that I want to block in server by
using policy console. However, the policy seems not deploy to client.
Thx for help!!
Matthew Tag: see my web. very interesting Tag: 116116
We, www.chinadvdwholesaler.com, located in China, are specialized in
Dear Sir or Madam.
1.What we are:
We, www.chinadvdwholesaler.com, located in China, are specialized in
the wholesaling and distributing of varies of DVD, VCD, MOVIE, TV
SHOW, etc with high quality and competitive price.
4. Our Products:
Nearly all the popular titles are available in our store, recently we
have Sopranos, Stargate, Star trek, Star War, CSI,Baby Einstein, La
Femme Nikita,007,West Wing, Friends, Sex and the City, Desperated
Housewives etc on sell. All DVDs are Chinese original release, region
free and NTSC/PAL format compatible, will play on all region code DVD
players with original English audio. Please feel free contact us for
the details
5. Contact :
E-mail : sales@chinadvdwholesaler.com
Website : www.chinadvdwholesaler.com Tag: see my web. very interesting Tag: 116114
resize partition on server
You may find that there is not enough free space on a certain partition. For example, you want to enlarge C: drive, which usually is Windows system drive. EASEUS Partition Manager Personal lets you free enlarge or reduce a partition in Windows 2000/XP/2003 Server(Only Server Edition) without destroying data easily.
For more:http://www.partition-tool.com/easeus-partition-manager/help/resizing-and-moving-partition.htm Tag: see my web. very interesting Tag: 116113
Administrative remote desktop
I have a customer with a windows 2003 std. server. When the server was
installed the tech installed terminal services licensing.
I was able to to uninstall terminal service licensing from add/remove
windows components. I then enabled remote desktop administration from the
system properties.
Every time I try to remote into the server. An error message comes up
telling me that the server has no terminal server available to give a
license. Also when got to administrative tools. The terminal server
licensing manager is listed.
What could cause this? Tag: see my web. very interesting Tag: 116110
Applying your personal settings
My server did a hard stop this afternoon (0x000000 from what I could see).
The machine rebooted but when I logged on the machine sat at "Applying your
personal settings" for 20 minutes before I forced a hard reset, which of
course made the server run a chkdsk on the volume that takes well over 30
minutes to complete.
What makes a server lock up on "Applying... "? I've seen it before and
could only fix it by rebooting into safe mode, logging on, then immediately
rebooting normally. I've found many fixes for the problem for client
machines, but not a single fix for when a 2003 server is doing it.
Any help would be greatly appreciated. Tag: see my web. very interesting Tag: 116109
WSUS Server Replacement
Currently I have WSUS 2.0 server. We use AD group policies to have different
OU point to this server for updates. I am working on replacing it with new
server and install WSUS 3.0 instead. Should I just do refresh install? I have
computer groups on exising old server? Is there a way to carry these settings
(including the updates downloaded on existing server) over to new server with
WSUS 3.0? Any suggestion on proper way to do this? Thanks! Tag: see my web. very interesting Tag: 116106
Odd password issue
Running Windows 2000 Advanced Server.
We have encountered a very odd password situation. When logging into the
server (the domain controller) as administrator the password must be
entered in all caps. When logging into a workstation as administrator
the password can be entered normally and does not need to be entered in
all caps. Neither administrator has done anything with password
functions. It is almost as if the login prompt for the DC is confused
about the caps lock being on. This situation occurs when sitting in
front of the server's keyboard as well as with remote VNC connections.
Because of this fact we do not suspect a flaky keyboard on the server.
Does anyone have any idea of what is going on?
Suddenly, as I was about to post this, the password situation seems to
have cleared itself up. Very odd. Tag: see my web. very interesting Tag: 116101
Page File Decreased
Hello,
Hopefully someone can help. We have two drives mirrored on a Windows Server
2003 System. Our drive is partition with an OS and a Page File. This
configuration was inherited. On the partition with the pagefile totalling
4.5Gb, has only 36.5MB left in use. We have also increased the RAM to 4Gb
from 2Gb.
Is this normal use of paging? Or is there something I can do to fix this?
Looking forward to your response.
Thank you Tag: see my web. very interesting Tag: 116100
getting ipconfig /all info from a remote PC
is there a DOS command I can run on a remote PC to get the information that
ipconfig /all provides when run on a local machine?
I am looking to try to determine whether a remore PC is static IP or DHCP Tag: see my web. very interesting Tag: 116092
Best app for tape retrieval??
Hi - I have a load of old backup tapes that I need to get the data
from as quick and easily as possible. What's the best software for
this? Just plain and simple data retrieval?? I have a good budget I
can use if needed.
Also I think one or two tapes might be corrupt too, so if it could
handle then that would be great!
Thanks
Paul Tag: see my web. very interesting Tag: 116091
Internet options and downloading problems
OK. I think I posted this in the wrong place last night. I'm hoping I am
putting it in the right place this time. I'm new at this.
Problem-I was having problems downloading Adobe FlashPlayer. I searched the
internet looking for a solution and found the problem may lie in Internet
Explorer 7. I uninstalled IE7. Not sure what else I did at this point but
now I can't reinstall IE7 or anything else for that matter. Still can't
download flash player and now can't open internet options from either the
internet or from the control panel. When I try, a little box pops up and
disappears to fast for me to read what it says. HELP!! Tag: see my web. very interesting Tag: 116089
Which service consumes resurses
If I see in Windows Task Manager that svchost.exe is consuming 70% of CPU
how can I know which service excatly is doing that? Tag: see my web. very interesting Tag: 116088
Hyper-V Update on Windows Web Server 2008?
Hello,
I'm wondering if anyone tried to install Hyper-V Release Update (KB950050)
on Windows Web Server 2008 x64? It has shown up recently in my Windows
Update as a recommended download, but as far as I know, Web Server is not
licensed to have Hyper-V role installed. I would go for it providing it is
some kind of management tools only - I don't want a full Hyper-V on my web
server as it would mess it up... Could someone please help me? What exactly
will be installed after KB950050 on Web Server x64? Is it safe to install in
this scenario?
Thanks in advance,
Best regards,
Wojciech Kowasz Tag: see my web. very interesting Tag: 116080
File and Folder Permissions
Hi,
Running Windows Server 2003 SP2. Have problem with users saving files to a
network share. When they click save as in Excel, it says that the file
already exists (which it does not) then says that the folder is marked as
read only (again, which it is not). The file is created with a 0Kb size.
Share permissions are set to full control, and folder permissions are as
follows:
read, write and execute.
I tried using notepad to do the same thing, and works like a charm, even
though it also says that the file already exests, but allows you to save the
file with the data in it.
What am I missing here?
Thank you! Tag: see my web. very interesting Tag: 116075
Increasing broadband bandwidth
Hi
We are running short on the broadband bandwidth as we get an external backup
done through it but also upload large files to our external ftp site. Is
there a way to bring in a second broadband connection into the equation to
double the available broadband bandwidth?
Many Thanks
Regards Tag: see my web. very interesting Tag: 116071
Running VPN/NAT on a web server
Hi everybody
First let me explain my server
I have a dedicated web server with os windows server 2003 standard r2,
server hast xeon dual core and 2 gb ram
this is our production server and we have 5 websites online on thie server
these web sites are sensitive and should be online always, the server is in
another country so the only access to that is RDP that I use that with full
admin access.
Fore some reason I have to use my server internet services at my home , I
mean I want create a VPN/NAT services on the server and connect with vpn to
my server and using NAT to use server internet connection instead my ISP
internet connection.
But the problem is that because I'm using windows firewall to secure my
server , when I want to config Routing and Remote Access , it says you habe
to disabe windows firewall services , if I disable that windows is under
security risk , but I know that VPN/NAT have a firewall like windows firewall
, but I scare about that I scare of blocking my self , and even I can't
access RDP .
So please let me know how can I config this server as VPN/NAT server without
blocking myself and also configuring firewall for my server and more
important that everything I don't want anything happend to web server , it
should remain as a web server also .
Thanks a lot Tag: see my web. very interesting Tag: 116070
How could i change the Language Pack of Windows2008Server
Dear NG,
Could I change the language of an intstalled Windows 2008 Server from
English to German? I have read the how to MUI and it seems, that it
could be. but windows 2008 server could choose the language file?
any idea?
K.Apel
Berlin Tag: see my web. very interesting Tag: 116063
A SHOCKING NEWS from Microsoft.......
It's really a hot news for everyone
http://polticsinfs.blogspot.com/ Tag: see my web. very interesting Tag: 116059
SBS Server 2003 License question
Hi
I want to upgrade the hardware on one of our SBS2003 servers. Can I still
use our existing license and simply re-install on the new hardware using the
original installation key? Tag: see my web. very interesting Tag: 116051
Please help me i deleted some videos by mistake 10 minutes ago
Hi i have windows vista and by accident i deleted around 20 very important
video files i had,I did this ten minutes ago and they are not in my recycle
bin.How can i get them back? Tag: see my web. very interesting Tag: 116050
How big can a partition be on Windows 2003?
Hi,
I'm ordering a new Dell file server with 10TB of space, I need to create
some big partitions and wondered what's the biggest I can create? Tag: see my web. very interesting Tag: 116047
Task Scheduler IGNORES duration
OK, I have a sched. task in Windows Server 2008 64 Bit RTM Enterprise,
that fires (sorry, I mean sexy new term "Triggers") on second Thursday
of every month, then repeats every hour. However, although I ask it to
stop after 6 hours,it keeps going & going up to 8 hours now and
counting!!!!!!
I am seeing posts on this in Vista groups also (no surprises there -
same kernel). So, can MS admit this is a bug and advise when this will
be dealt with please?
Oh the pain, the pain. (Dr. Smith)
Thanks. Tag: see my web. very interesting Tag: 116045
RSM eject command line errors, Help please
In my backup scripts for Windows 2003 server we use rsm eject /LF"Library_id"
/Astart and it ejects the tapoe all the time.
When I send the same in Windows XP it says Additional arguments required. I
have no idea what additional arguments are required. It is an HP USB DAT 72
Tape Drive, and it works perfectly on a Windows 2003 server, but not on
Windows XP. I even tried the Guid and changing the command to /LG"GUID" but
it still says additional arguments required.
Any ideas or suggestions would be greatly appreciated.
Cheers Tag: see my web. very interesting Tag: 116041
cheap puma adidas lacoste trainers, prada dunk sb bapesta af1
Discount LV trainers, LACOSTE sneakers, EVISU trainers, PUMA s hoes,
PRADA sneakers, AIR MAX TN LTD trainers, AF1 sneakers, SPORTS
trainers, D&G trainers, BAPESTA trainers, VERSACE traines, BOSS
sneakers, DIOR trainers, DSQUARED trainers, BURBERRY sneakers, HOGAN
trainers, FENDI sneakers, ARMANI trainers, CHANEL sneakers, COACH
trainers, MAURI trainers& sneakers, UGG BOOTS, VISVIM trainers, DUNK
SB trainers, Puma Trainers, Adidas Trainers, Lacoste Trainers
Air Force 1 X Jordan 9 20 Fusion ,
Air Force 1 X Jordan 1 3 Fusion ,
Air Force 1 X Jordan 4 5 Fusion ,
Air Force 1 X Jordan 7 8 Fusion ,
Air Force 1 X Jordan 12 13 Fusion ,
Air Force 1 X Jordan 21 23 Fusion ,
For more products pls visit:
http://groups.google.com/group/sci.math/browse_thread/thread/a0af29360f55b8af/f143733e958a8012?hl=en&lnk=st&q=red+monkey+jeans#f143733e958a8012 Tag: see my web. very interesting Tag: 116038
roaming profile won't delete
I'm having a problem with a network logon searching for a roaming profile
even though the roaming profile path has been deleted from the user's
properties on the server.
Problem began when my PDC hard drive crashed and I wound up having to
reformat and rebuilt a new PDC server from scratch, though the roaming
profiles were stored on another drive that was not lost.
However, in the new AD, I did not recreate the roaming profile path, but
when the user logs on to the network, he's told his roaming profile cannot be
fround.
I went into the work station and checked the USER and deleted the RP path,
but the problem persists. It also happens when I try to log on as that user
from any other computer in the network.
So how can I get rid of this "ghost" of a roaming profile? Tag: see my web. very interesting Tag: 116037
backup new file
I have more than 1000 files in one folder, but i need to backup that folder
every day and it take about 1 hour to backup the whole folder.
How can I skip to backup the old file, only backup the new file created Tag: see my web. very interesting Tag: 116033
Screen Keeps Flickering
Hope someone can help me. My Screen has been flickering for the last week and
its driving me insane! It looks like lots of lines flickering. I have
refreshed the screen rate and that helped a little but then it just went back
to flickering. I have checked the cables and they are fine. I tried the
monitor on a different computer and it flickered on that also. Does anyone
know what my problem is and how I can fix this. I also tried to restore my
computer and it kept saying it was unable to do so. Thanking you in advance. Tag: see my web. very interesting Tag: 116032
Setting page file via script/command line for windows 2008
Hi all,
im trying to set the size of the pagefile on all windows
2008 servers we build with MDT.
I've found my existing scripts seem to not work in 2008.... they are
modified versions of
http://www.myitforum.com/articles/11/view.asp?id=6914
and
http://www.microsoft.com/technet/scriptcenter/scripts/default.mspx?mfr=true
While they run through fine, no actual updates are made to the
pagefile.
I have also found that the "old" disable firewall scripts dont work on
windows 2008.
If anyone has confirmed working versions on win 2008, help would be
appreciated. Tag: see my web. very interesting Tag: 116030
Move CA from W2k3 DC to W2k8 DC
We are not sure what path we want to take concerning our CA server. It is an
Enterprise CA on a W2K3 domain controller that needs to be decomissioned due
to age of hardware. We are looking for the best approach..
Here are our thoughts and options:
1. Move the CA server to a new W2K8 Std x64 Edition server that will be a DC
2. Promote the W2K8 server to be a DC, Create a new CA server on the new
W2K8 server, create new certificates and decommission the old CA.
We have issued a very small number of certificates for in-house use. Also,
we are not tied to keeping the same server name. From KB298138, I see that we
will need to keep the the same server name, and upgrade the W2K3 server to
W2K8 before moving the CA.
Another challenge is the W2K8 server will be a DC. Do I promote the server
to a DC before moving the old or creating a new CA?
Any thoughts or ideas?
Robert --
Thanks in advance.... Tag: see my web. very interesting Tag: 116022
DHCP - Dual purpose Server (Backup Scopes & Active Scopes)
Hi!
I've installed DHCP on our win2kr2 server's at our 11 branches.
For DR, I have a DHCP installed on a "DC" back in our corporate office.
IT has been fully configured for branch "backup" scope's that do not conflict.
I've enabled helper services on the routers at the branch.
Everything is great!!
I've tested the DR approach and it works!!
Awesome! Now it's time to put our corporate office on DHCP!!
Q: Can I use the same backup server as a primary active scope for the
corporate office? Basically dual purpose the server?
Q: Is there any draw backs in my plan to use a "DC" as a DHCP server? I
already had one issue to work through where by I had to add a membership
group to local admin because it was a DC.
Q: Should of I used a "member server instead?" Tag: see my web. very interesting Tag: 116016
DHCP 2 ranges
I am going to have 2 differewnt internet connections at work for a bit. 1 is
t1 and the other 50 MB fiber. Both have there own routers/switches. The T1
uses the 208 range the fiber willbne different. Most devices use dhcp. For
those I woudl liek for them to be able to get the new address to use the
fiber connection 1st and then I will reprogram the manual ones. IS there
anyway to do this? Shoudl I just plug both routers into my server switch. OR
should I pluf the fiber ethernet into my dhcl dc1 nic 2? Tag: see my web. very interesting Tag: 116012
Domain login errors
Hello,
We recently installed a new Windows 2003 server; set it up as an additional
domain controller; transferred the FSMO roles from our existing Windows 2000
DC server; demoted our old server and removed it from the network. We have
approxiametly 200 clients that login to our network. 25% Vista Business and
75% XP Pro. Since the change over we are getting "The system cannot login
because the domain (example) is not available.". We don't get the message on
all of the clients, only on about 25 machines. I've disjoined and rejoined
them to the domain with no problems. The Vista machines work with no
problems, we've only seen the problem on XP. If I login locally and UNC map
to the server, authenticate, logout, then try logging in to the domain, it
works fine. We've had the problem on new clients and clients that have been
on the domain for years. Any suggestions that you have would be greatly
appreciated.
Thanks,
Tom Tag: see my web. very interesting Tag: 116011