is there a newer version of srvinstw.exe for Win2k3?

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Is it wrong to create security groups on mydomain/Computers container? Hi all, I'm creating security groups of computers to assign different domain level GPOs to each of them. In the past I created such groups in Active Directory Users and Computers in mydomain/Computers instead of mydomain/Users. In the past it looked to me more natural. But I always wondered why Microsoft creates groups of computers in mydomain/Users? For example in my W2K3 domain controller "RAS and IAS Servers" , "Domain Computers", "Domain Controllers" groups are created in mydomain/Users. Is it any problems with creating security groups in mydomain/Computers? Does not it works the same if they were created in mydomain/Users? Thanks in advance Sammy Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 112140
  - 2
    - Monitor if a port is being used Hi, is there a tool which allows be to monitor and log whether a port has been used on a Windows 2003 server? We have opened up a port on our remote firewall to a server and just want to log the access on this port. Our firewall can't do this :( Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 112139
  - 3
    - WSUS client stops talking to server On a 100 device NT4 domain - with a 2003 based WSUS 2 server talking to W2K clients. A few workstations just decided not to talk to the server any more. Their WSUS log has an entry saying 2008-04-29 14:13:34:226 1200 6e4 Misc WARNING: Error: 0x80092026 when verifying trust for C:\WINNT\SoftwareDistribution\SelfUpdate\Default\wuident.cab From that point on, even if I re-install the WSUS client it registeres with the server but then will not talk to it to find out what updates it needs. This affects approx 10% of my workstations, each at slightly different update stages, and I am at a loss on how to get these talking again. 50% plus of my devices have ALL updates downloaded the remaining 40% are nearly there and this 10% are miles away and doing nothing. The WSUS client diag program gives pass on all but three entries which are NONE (for winhttp local machine proxy and bypass proxy and autoconfig URL proxy) Anyone else seen this? I have done the usual, detcect now etc etc and deleted registry entries but nothing -- Dave B Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 112137
  - 4
    - CMOS (non-volatile harware) clock sycronisation I have a number of Windows member servers in an AD forrest and in steady state w32time keeps there clocks approximately right (+-200ms). However when they are rebooted their clocks are (for a short time) all over the place (for 10-30 minutes) because, it would appear, that nothng is keeping the CMOS (non-volatile harware) clock in sycronisation with the Windows clock. On Linux I'd just create a cron job to do "clock -uw" periodically but I can't find any equivalent on Windows. Please note: I'm asking how to get Windows to keep the *CMOS* clock synced so that when servers are rebooted their clocks start out *approximately* right *before* w32time manages to syncronise to a time server. Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 112136
  - 5
    - Adding Server 2008 DC to 2003 Domain New to server 2008. I have an existing 2003 domain with 2 DCs. Can I simply go thorough the 2008 setup with a new machine and make it a 3rd DC? Any special pre-installation steps? Also, what about adding it to a 2000 domain (with two DCs)? I know about "adprep" being required when upgrading from 2000 to 2003. But what about simply adding a 2008 DC to an existing 2000 domain? Advice, links appreciated. Thanks, Frank Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 112133
  - 6
    - Server 2008 x64 Fax Server with x32 XP Clients I have a 64 bit Windows Server 2008 Standard server configured with the fax server role. I can't seem to figure out how to add x32 drivers so I can "print" to the shared fax device on the server from my 32 bit XP clients. I can send a fax from the server without a problem. When I try to add the x32 drivers to the shared fax printer on the server, I'm prompted to "please provide a printer driver". I've tried pointing to 32 bit XP media, 64 bit Server 2008 media, tried loading the driver from an XP and Vista PC via the server share, but it doesn't accept any of these paths. From my XP PC, I can browse to the share on the server & connect the fax print device. It appears on my XP PC as "Fax on %servername%". I can open the fax console on my XP PC & see jobs that are in the outbox (submitted from the server). When I attempt to create a new fax from the XP fax console, I get an hourglass for a brief moment, and then nothing. If I try & print to the fax "print" driver from the XP PC, I get nothing. I believe with the x32 W2K3 fax server I worked with a wizard came up asking for the fax number, select a cover page, etc. I'm assuming this is because I don't have the x32 fax driver loaded on the server. Any ideas on how I can add this? Thanks in advance for your assistance. Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 112129
  - 7
    - USB2 issues with Win 2000 Hi, I've got a Windows 2000 server that does not play well with USB2 devices. It will go as far as mounting a USB2 drive, but if you try to read or write to it more than just a little bit, it has issues. If you do a quick format on it, it wil fail. Any ideas what is causing this? How can I reload the USB2 drivers somehow? I have another Win2k SP4 that works great with USB2 drives... Thanks, Alan Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 112126
  - 8
    - Internal network remote desktop control Dear all, I have a Windows 2003 server network with over 100 pc's on and wish to use remote desktop to support them but not by logging the user off. Suggestions please. Cheers Adam Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 112124
  - 9
    - VPN server one nic Hi, We have all our servers behind the firewall, all clients are on the other side of the firewall and are secured from the internet by additional firewall which blocks Windows file sharing etc. We want make posible for our coworkers to access our fileservers and other services from home. Can we configure server to be vpn server with one nic card? We will open than ports in the firewall only to this server. What port should we open than? MarcusB Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 112120
  - 10
    - Migrating local user accounts between two Windows Server 2003 mach Hi - I hope this is the right place to ask this. I need to migrate applications between two web servers. Currently there are a large number of local computer accounts on the old machine. I want to transfer all or most of those (with passwords and groups) to the new machine. I've struggled to find out how to do it. There are lots of tools and advice for AD migration, but I've not found anything for Windows 2003 single machines Can anyone give me some pointers? Cheers Iain Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 112113
  - 11
    - Performance counters Does anyone know what are the recommended values for performance counters in Windows system. I'm not talking about the most obvious ones like Disk Time, Processor Time or AverageDiskQL. I tried googling for it but couldn't find any source that would give me a list with recommended values Thanks yaro Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 112112
  - 12
    - Dualbooting Vista Windows 2008 Hi Currently I have Vista installed on my main computer, but I'm about to do a dualboot installation with Windows 2008 Server on a dedicated drive. Are there any issues I need to be aware of going into this or is this a straight forward process? Currently using Vista Ulitmate 32bit, and installing Windows 2008 server 64bit on dedicated drive. /A. Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 112109
  - 13
    - Making a user Local Admin on domain computers Hi Is there a way to make a domain user local admin on the domain computers. I have a trainee at work and I would only like to give his account local admin right on the domain computers. It would be a bit tedious to give him local admin rights manually on 170 workstations. Thanks in advance /Nick PS. This is a Server 2003 domain Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 112107
  - 14
    - REAL: Windows Vista/7 Free DVD (Limited Time) w/ free Alienware www.ubersite.com - Future of media What do you think of the site. Will you join? What do you want to see in the future? You can get windows free at www.linux.com -- Users of Ubersite Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 112098
  - 15
    - domain logon issue Hello. I am having problem on a member server running Windows Server 2003 SP1. It took 30 minutes to log on to the domain after a reboot. The server seemed to be forever hanging at "applying settings..." before it finally connected to the domain. I found a lot of errors with event ID 1053, source: userenv. "Windows cannot determine the user or computer name. (The specified domain either does not exist or could not be contacted.) Group Policy processing aborted." ____________________ Running netdiag.ext shows some errors: Testing trust relationships... Failed Testing Kerberos authentication... Failed DC discovery test. . . . . . . . . : Failed Find DC in domain 'MyDomainName': [FATAL] Cannot find DC in domain 'MyDomainName'. [ERROR_NO_SUCH_DOMAIN] DC list test . . . . . . . . . . . : Failed 'MyDomainName': Cannot find DC to get DC list from [test skipped]. List of DCs in Domain 'MyDomainName': Trust relationship test. . . . . . : Failed Test to ensure DomainSid of domain 'MyDomainName' is correct. 'MyDomainName': Cannot find DC to get DC list from [test skipped]. [FATAL] Secure channel to domain 'MyDomainName' is broken. [ERROR_NO_LOGON_SERVERS] Kerberos test. . . . . . . . . . . : Skipped 'MyDomainName': Cannot find DC to get DC list from [test skipped]. LDAP test. . . . . . . . . . . . . : Failed Cannot find DC to run LDAP tests on. The error occurred was: The specified domain either does not exist or could not be contacted. Find DC in domain 'MyDomainName': [WARNING] Cannot find DC in domain 'MyDomainName'. [ERROR_NO_SUCH_DOMAIN] ________________ MS Help says: To verify that the domain controller can be contacted through Domain Name System (DNS), try to access \\mydomain.com\sysvol\mydomain.com, where mydomain.com is the fully qualified DNS name of your domain. This test also failed. ________________ I tried to connect to this server from a couple of client computers. One client is ok. The other client got the following: The Mapped network drive could not be created because the following error has occurred: The specified network name is no longer available. When I tried to connect to it via UNC, it also errored out: There are currently no logon servers available to service the logon request. Sorry for the long post. Thanks for your help. TL Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 112094
  - 16
    - Server 2008 thin client requirement - Advice Hi, Colleague of mine wants to remove laptops from his organisation and go with thin clients. No probs there. He has only 1 physical server, and would like to upgrade to windows 2008 at the same time. Is 2008 running DC, and terminal services a supported configuration ? Would need to be app mode as there will be 5 clients.... I could stick a VM in Hyper-V I guess for the TS reqwuirement, just want to get people's view on the best solution. Thanks in advance. Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 112093
  - 17
    - Forcing "List in the directory" for a printer? At my office, we are currently doing some spring cleaning on our printers, rearranging some units, tweaking installations, etc. We have a label printer on the network and it's currently being shared by one of the workstations. All this is fine, and others can use the "Browse" feature to find it and access it through that machine. What bothers me is there is no "List in the directory" check box alongside the "Sharing" settings. It's simply not there. It would be useful if uses could go one place (Active Directory on our SBS 2003 server) to add printers instead of digging through two different interfaces. If I add the printer through the original workstation, however, I *do* get a "List in the directory". box. Can somebody tell me what controls "List in the directory"? Windows has so many hidden options in the Registry, I was thinking it could be as simple as adding a new value or flipping something from 0 to 1. I did find where the check box setting would be stored, at HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers\ in the Attributes value for the specific printer, but setting bit 14 on and restarting the computer didn't force an entry in Active Directory. I realize I can also manually add a printer in Active Directory Users & Computers, but am not sure I can direct it to that particular workstation for the drivers. I've also browsed AD manually and have an idea which settings are needed and where, and might even try doing this manually. But what is the easiest way to accomplish this? Is the missing check box caused by an actual .dll or .exe ? Could the printer just be installed wrong? Thanks for any suggestions. Todd Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 112092
  - 18
    - Cheapest price on Windows Server 2008? What is the cheapest price anybody has found for Windows Server 2008 Standard? US or UK. Thanks ss. Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 112088
  - 19
    - No login window appears after server running for some time New IBM xSeries 3400 server running Windows 2003 R2 with all of the latest patches. Member server in an SBS2003 domain. Since going in the server has worked fine except after some period of time, we go to the console and the screen is totally dark grey. Pressing Ctl+Alt+Del does nothing -- no login prompt appears. Similarly, any attempt to connect via RDP doesn't give the login...just the grey background. This only happens after the server has been running for some time. We'll force a restart of the server and all will be fine for a day or longer (the login appears at the console and is available through RDP). Then, for no discernible reason, the problem recurs. Nothing strange appears in the event log. The only thing different between this server and other similar boxes that we've installed is the version of Pervasive SQL. This box is running version 10, whereas prior installations were version 9 or older. Pervasive professes no knowledge of the problem. I'm lost as to how to troubleshoot. -- Doug Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 112087
  - 20
    - Remote event viewer access without being a server admin? Hi, I want to give a set of developers access to view a Window 2003's event viewer logs remotely using an MMC snap-in without granting them administrator access to the server? Does anyone know how/where I grant those specific rights? Thanks, Paul Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 112081
  - 21
    - Group Policy and the Legal Message For whatever reason, when I apply the message in GPMC the computers I applied it to don't ever display the legal message before login, or at all. I have the option enabled in my GPO, and the computer is also in the OU, and I also added the computer to the list of stuff it affects in the GPMC console, but still no results even after a restart. What am I doing wrong? Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 112073
  - 22
    - SCSI Enclosure Device in Windows 2008 Hi I have a storage array that supports SCSI Enclosure Services on LUN ID 254. In Windows 2008 this appears as Generic SCSI Enclodure Device under System Devices in Device Manager. I need to send SCSI inquiry on this device but I am not able to figure out which device name I should be using. I initially thought this will appear as another \\.\PHYSICALDRIVEn but it did not. How do I find out the device name for this device? Thanks jas123 Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 112071
  - 23
    - Netmeeting Transition We want to transition our netmeeting.companyX.com server from Windows 2000 to 2003. What is the best way to do this? There are ILS locator settings, but I think if we change the IP in DNS to the new server..we may be fine (as long as it is installed and working on Win2003). Any help is appreciated! Steve Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 112067
  - 24
    - Q While discussing the development of a new backup strategy for your company, a colleague uses the term TARGET.What is she referring to? The system hosting the tape drive? The backup deivce? The data object to be backed up? The media in the backup device? Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 112058
  - 25
    - How to recognize a hardlink I wonder if and how I can distinguish a hardlink from a regular file without a dubfinder. Is there something like the inode-count on linux-ext3 on NT6? Regards Thorsten Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 112055
- Next
  - 1
    - View Processor Queue Is there a piece of software to show us what is in the processor queue? One of our servers has been throwing our monitor off stating the process queue is too large. I checked into it and found the queue length gets upto 12 when it should be around 6 or 8 at max. Although this annoynance lasts less than a minute and does not hurt production. We want to see what is queued at the time this warning is tossed by the monitor so we can determine if we need to separate roles to another server or tweak software already on the server to not use certain features. All software I have tested so far gives all running processes and not what is queued at any given moment. Thanks Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 112054
  - 2
    - bump bump Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 112050
  - 3
    - Resizing the C drive I have a Dell PowerEdge 1850 with a 67GB RAID-1 set runing Windows Server 2003 The C drive is 12GB and I want to extend it to 20GB I can blow away the D and E drives and recreate them later What is the best way to extend the C-drive. I do not want to rebuild this server as it has apps that I did not install or configure and I don't wanna have to figure them out. I have Partition Magic 8 I have Ghost 7.5 There is also NTBACKUP with ASR I thought I read that ASR doesnt restore Applications, just OS. This can't be true. If I use ghost I will have to leave the domain, ghost and then rejoin the domain (I've found in the past that ghosted when on the domain just puts the new machine into a reboot loop). The question is, if I make a ghost image of this 12GB C-drive, when I burn to the server again will it just recreate the 12GB partition or can I rezise to 20GB. Thanks Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 112046
  - 4
    - WSUS 12GB to download!! Hiya I have used WSUS for about 2/3 years without much issue. Now I notice when I synched that there were 12GB and 75 files of downloads - which seems a huge amount. So far it has taken three days and has only done 25%. I am suspicous something is not right, as I have never seen such a huge download requirement before. Just wondering if this is something for me to be concered about, as it is like it has lost all it's history and started again. My main concern if it pushed ALL updates to the clients then they would all take a few hours to install, and amy interferre with business. TIA Lewej Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 112044
  - 5
    - Problem with KB948496 Is there any known issue with the security patch KB948496, released by Microsoft in March. Each time I installed the patch on a particular "W2K3 R2 64Bits edition SP2", I can no longer be able to connect with "Remote Connection" to the Server. And if the Server in not yet in AD-Domain before installing the patch, then no possibility to add the server to an AD-Domain. Any idea how this could resolved Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 112042
  - 6
    - Migrating From NT 4 server to Server 2003 I have to migrate our NT 4.0 server over to a new server 2003 box, will I be able to install the 2003 server into the same domain name or do I need to create a new domain, if it is not possible to keep the same domain name, will I have to copy the users profiles on there desktops over to new profile when they join the new domain? Does ADMT have this fuctionality Brian Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 112036
  - 7
    - services.exe I, too, have been experiencing this services.exe leak on two different Windows 2003 server (mine and my client's). Could you tell me the program you are referring to that set the limits? thanks. Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 112033
  - 8
    - Static WINS mapping migration Done a lot of googling on this subject but can't seem to find the answers. I have a number of Windows 2003 WINS servers in a spoke/hub replication topology. There are some static WINS mappings scattered about the different servers but I'm looking to remove one particular server (call it SRV-A) from the topology but cant seem to see the recommendation way to migrate a static WINS mapping whilst maintaining 100% uptime and availability of the record. In the lab I had limited success manually readding the records statically to another owner (SRV-B), this bascially just duplicated the record on the new owner, 1 version of the records was set to infite with owner SRV-B and 1 set of records with expiration of next week and SRV-A as the owner. I then manually deleted all records with SRV-A as the owner but found that the SRV-B records would not replicate correctly. To resolve I had to delete the SRV-B records aswell and recreate. This obviously causes me an issue as by doing this I will potentially cause an outage in production while the records replicate naturally around the environment So the question is, does anyone know the recommended way of changing the owner of a static WINS mapping? Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 112030
  - 9
    - Off topic question: I have two product keys, how can I tell what software they go with? I've gotten the sleeves and the disks mixed up I think? Is there a way to tell what software belongs to what key? Thanks Kelvin Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 112028
  - 10
    - DFS Upgrade Hello guys, I have the following problem: 2 Windows 2003 Domain Controllers(to keep it simple DC 1 and DC 2). Each DC is a DFS server with replication between. Because replication was very slow, we decided to upgrade both DC's to Windows 2003 R2, so we could use DFRs instead of FRs. DC 1: Windows Server 2003 -> in place upgrade to Windows Server 2003 R2. DC 2: Windows Server 2003 OEM -> we installed a new domain controller DC 3 with Windows Server 2003 R2 and removed DC 2. So current environment: DC 1: Windows Server 2003 R2 DC 3: Windows Server 2003 R2 (both SP2) We installed DFS on DC 1 and DC 3. Everything went fine until we started to replicate the DFS Folders. DC 3 seems to work fine (We don't receive any errors in the event viewer) Unfortunatly, DC 1 logs an error with event id 4004: The DFS Replication service stopped replication on the replicated folder ... So we have now 3 folders with data on DC 3 but the data is not replicated to DC 1. We stopped the DFS replication to avoid all the 4004 errors being logged. Any ideas? Remark: When upgrading DC 1 to Windows Server 2003 R2, we got the next problem after the reboot. Windows File protection: Event id: 64005 System protected file <file path> was replace with another version. -> winsevnt.dll We didn't replace the file because R2 should be the newest and correct version, no? Thx in advance! Mike Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 112026
  - 11
    - Mounted volumes and Shadow Copy - 2003 Hi All I am trying to create a file system that uses mounted volumes within a folder structure. The file system needs to have Shadow Copies available. It appears that although I can create shadow copies for mounted volumes it is impossible for users to use the previous versions tools to restore files within these mounts. Is this correct or is there a workaround? Many thanks Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 112019
  - 12
    - All my SCSI/HBA controllers stopped to work Windows 2000 Hello, After installing another HBA-card I lost all my SCSI or HBA devices. I was installing HP MPIO for Eva 4000, when I got blue screen. I managed to restore my system to a ide hard disk. Now all my SCSI controllers say that "A driver for this device was not required, and has been disabled." if I check them from device management. Same if I try to reinstall drivers. Any idea what could cause this? Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 112018
  - 13
    - Deactivate Data Execution Prevention Hello, I have a Win 2003 R2 SP3 Terminal Server, DC and Printserver is a Win2003 SBS. The Terminal Server stops working because of some problems with the spooler service. I would like to know if I can deactivate "Data Execution Prevention" by setting it from "only neccessary windows programs and services" to "all programs/services with exceptions" (sorry, translated from german). I am not sure what services/programs are monitored before and after the change. Also the result is not clear. Currently, our programs stop responding until I start the spooler service, however, what will happen after the change - bluescreens? I know that the cause of the problem may be one of the locally used and redirected printers in the TS sessions, however, I do not know which one causes the troubel. And we have many printers, as there are 4 subsidiaries with many printers connected to the TS. The events do not tell me which printer caused the trouble, it just says that the spooler service had to be stopped. Is there a way to restart the service automatically when it was stopped by the data execution prevention? regards arno Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 112015
  - 14
    - Backup application\system\security Logs in server 2003 Hi I need to backup application\system\security Logs in server 2003 once a week, Can I do it with automatic process or program or bacth file? thanks Lior Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 112011
  - 15
    - Change email for domain Here is the scenario I have a small business server 2003 and the domain is domain.com. I need to change the domain email to thedomain.com. Right now I setup the recipient policy on the exchange server to accept mail from thedomain.com. However when I reply to a message the reply says domain.com and I need it to say thedomain.com. So what do you think? Thanks Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 112008
  - 16
    - nat/basic firewall we have a windows 2003 std server i want to turn off its firewall, which is under Routing and Remote access - IP Routing - NAT/Basic Firewall I want to turn this off and only use my hardware firewall as we have new software which uses IIS and something is blocking remote access to this from out the office although it works ok in the office Look forward to your reply Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 112001
  - 17
    - scheduler fails to start task five hours after session close Hi all, I have a strange behavior on my servers where the scheduled tasks fail to start with message "Could not start". I looked around to find a more detailed explanation message, but was not able to locate any log file. Googling for similar terms did not help either so I did a bit of investigation. Here is the setup: Servers are on a domain but are not the domain controller I open sessions onto them using Terminal Services. I logoff once I have finished a session, using the start menu. I added one task every hour on the hour that calls the same batch file with the same credentials, those of the session I opened. Here is what I observed: If I keep the session opened, the tasks run fine. If I close the session and open a new one more than 5 hours later, the first four tasks have run fine, but the last ones failed with the "could not start" message. For instance, I logoff at 9:05AM, log back in at 4:05PM, the tasks scheduled at 10, 11, 12, 1 and 2 worked but those at 3 and 4 failed with the "Could not start" message. All the servers on which this happens are under Win2003 server with SP2 applied. Could anyone help me with this? Should I post this message on another group? Thanks in advance for any help Regards Olivier Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 111998
  - 18
    - Unattend file for Server 2008 I deploy my servers using the HP Rapid Deployment Pack, which images servers using a standard answer file. My disks are a 146GB mirrored array. By default the install uses all the space and I get a 146GB C drive. I need the boot partition to be 15GB In Win 2003 I add the line ExtendOemPartition=7500 to the answer file and I get the partition size I want. I have tried modifying the answer file for 2008 by adding the size line (as seen below) to the disk configuration. <DiskConfiguration> <Disk wcm:action="add"> <DiskID>0</DiskID> <WillWipeDisk>true</WillWipeDisk> <CreatePartitions> <CreatePartition wcm:action="add"> <Order>1</Order> <Size>15360</Size> <Type>Primary</Type> <Extend>true</Extend> </CreatePartition> </CreatePartitions> <ModifyPartitions> <ModifyPartition wcm:action="add"> <Order>1</Order> <PartitionID>1</PartitionID> <Active>true</Active> <Format>NTFS</Format> <Letter>C</Letter> </ModifyPartition> </ModifyPartitions> </Disk> <WillShowUI>OnError</WillShowUI> </DiskConfiguration> This does not work and the install stops with an error, just as the Windows install begins that says "Windows could not prepare the partition selected for installation" Any help on how to correctly modify this install file is appreciated. Thanks Chris Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 111995
  - 19
    - Windows 2008 Enterprise - OEM or Licensing Hi all, I'm just about to take the plunge with purchasing Windows 2008 Enterprise across the board (I would use standard but am worred about the 250 user max on TS Gateway... is this per server or per farm?) If I buy Licensing I presume I will have to buy CAL's as well. However, if I buy OEM I will get 25 CAL's with each copy (presumably with each copy I get 25 users, not just 25?). Therefore, as OEM is cheaper, I'm presuming by drawback is that the product lives and dies with the server? Can I still use Virtualisation if required to run up to 4 hosts on each box? TIA for any comments! Nothing is easy with licensing.... Mike Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 111990
  - 20
    - Windows 2000 migration to 2003 We have 4 DCs, each one at a different site. The main DC, with the global catalog running windows 2000 in mixed mode resides in NY. The 4 DCs are on machines that are 10 years old and need to be replaced. Ideally, I would like to replace each site one at a time.I would like to keep the same domain name. I would also like to transfer the machine name and IP address to the new server. Below are my 3 options. Which one is best. TIA 1. Use ADMT. From what I read, this tool is only usefull if the domain is different. Is this true? 2. Replace the DCs with the new 2000 machines, move roles over to the new machine and perform an upgrade to Win 2003 using ADPREP/FORRESTPREP AND ADPREP/DOMAINPREP 3. Install a new machine as a windows 2003 member server, promote to DC. -- Greg Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 111970
  - 21
    - Can't format Soft-RAID5 on Windows Server 2003 Hi, I have a noname SIL3114 4-port SATA-Controller on an ASROCK P4V88+ (VIA-chipset with 2-Port onboard sata). With RAID5-BIOS, Windows Server 2003 started formatting my 4-HD-Array but couldn't complete it ("the format did not complete successfully"). The same happens when I use the SATA-Controller with a simple BIOS without onboard-RAID functions. Neither Quick-format nor longformat could complete the format. I also tried different cluster- and volume-size with no success. Any ideas? Should I use another special format utility? Marcel Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 111969
  - 22
    - iFolder similar service on Windows Server We have whole infrastructure build on Windows 2003 Server domain. We have some SQL servers etc. We was asked to make possible for our users to access to the files from home. In Novell they have iFolder but what we need to have to make such service on Microsoft. Is there anything similar? MarcusB Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 111963
  - 23
    - chkdsk raid 5 I have been getting insufficent memory errors when I attempt to copy large pst files from our file and print server. This is also the case when I try to run scanpst (yes, I know there is no support for networked psts). My question is if it is ok to run chkdsk over a raid 5 volume? I have ran it in read only mode, but am concerned about possible corruption. Any words to the unwise on how to conduct preventative maintanance on a RAID 5 volume? Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 111961
  - 24
    - Support Tools for Server 2008 / Vista? Hi @ all, where I csn find the Support Tools for Server 2008 (not RSAT)? Or is it possible to run the Srv2003-Support Tools on Srv2008? Any idea? -- THX, Jens K. -- Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 111960
  - 25
    - DEP options greyed out in 2008 bcdedit Hello, I was having issues with a program running in 2008 so I tried a bcdedit command that I found on the web but can't seem to find any more. When I go to Data Execution Prevention under system properties, advanced perfromance options - I can't check either option even though I'm logged in as administrator. Anyone know the right command to enable it as it was? Thanks Tag: is there a newer version of srvinstw.exe for Win2k3? Tag: 111957

The Srvinstw.exe tool is the graphical user interface (GUI) version used to
create remote services. I got it from Windows 2000 resource kit. Just
wondering if there is a newer version or replacement for win2k3?

Thanks.

Top