fail to initialize

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Slow logon via RDP - CopyProfileDirectoryEx <-- Copy from microsoft.public.windows.server.terminalservices JC --> Hi there. I'm troubleshooting some problems we're seeing with slow logons to TS Servers over the WAN. I've enabled userenv logging and am focusing in on a delay during the logon regarding CopyProfileDirectoryEx. Snippet from userenv.log : USERENV(17c.a04) 08:05:20:466 FindTotalDiskSpaceNeeded: Largest 7 file size is 31323818 USERENV(17c.a04) 08:05:20:466 Available 693395968 USERENV(17c.a04) 08:05:20:466 Needed 128652920 USERENV(17c.a04) 08:05:20:466 Src size 85633382 USERENV(17c.a04) 08:05:20:466 Dest size 0 USERENV(17c.a04) 08:05:20:466 Largest hive file 2097152 USERENV(17c.a04) 08:05:20:528 CopyProfileDirectoryEx: Found hive file NTUSER.DAT USERENV(17c.a04) 08:06:07:622 ReconcileFile: E:\userDir\userDir\userName\PROFILE\NTUSER.DAT ==C:\Documents and Settings\userName\NTUSER.DAT [OK] USERENV(17c.a04) 08:06:07:622 CopyProfileDirectoryEx: Found hive file ntuser.dat.LOG USERENV(17c.a04) 08:06:07:685 CopyProfileDirectoryEx: Found hive file ntuser.ini USERENV(17c.a04) 08:06:08:279 ReconcileFile: E:\userDir\userDir\userName\PROFILE\ntuser.ini ==C:\Documents and Settings\userName\ntuser.ini [OK] USERENV(17c.a04) 08:06:08:279 CopyProfileDirectoryEx: Found hive file ntuser.pol USERENV(17c.a04) 08:06:09:029 ReconcileFile: Unable to open temporary file USERENV(17c.a04) 08:06:09:029 ReconcileFile: E:\userDir\userDir\userName\PROFILE\ntuser.pol ==C:\Documents and Settings\userName\ntuser.pol [OK] USERENV(17c.a04) 08:06:09:029 CopyProfileDirectoryEx: Calling ReconcileDirectory for all Directories USERENV(17c.a04) 08:08:26:390 CopyProfileDirectoryEx: Reconcile Directory Done for all Directories I've been trying limit the files/dirs that are contained in the Roaming Profile but compared to the 1:20 or so this function takes, the file copy/reconciliation is taking only 10-20 secs. I've testing this on both Windows 2K3 SP1 and SP2 machines. I'm assuming the hotfix contained in KB899409 is included in SP2 since the version of ntlanman.dll is way higher than the hotfix. I've cranked up userenv to 30002 but that doesn't give me anything more than 10002 ? Does anyone have any ideas or suggestions ? Thanks, JC Tag: fail to initialize Tag: 115941
  - 2
    - Installation locks up eating memory Hi I posted a few days ago about a problem with SBS2003 fresh install locking up during server tools setup on Internet Explorer 6.0 installtion. I had a reply saying it was probably due to an active internet connection. Since this i have installed a brand new harddrive and pulled the plug on the router while attempting the setup. Again the initial part of the setup is fine, its when it gets to the actual server configuration. Its gets as far as installing server tools, the message says its doing internet explorer 6.0. Ive left it at this point for several hours and it gets no futher. A look in the process list shows the setup process is just eating more and more memory. After a few hours it was up past 1gb of memory. I searched the harddrive for what was growing as i was also loosing harddrive space during this point. It turned out it was a log file (eventlog.txt) it keeps adding the same lines over and over again - these are [07/04/08,09:37:38] Setup.exe: GetCustomProperties() [07/04/08,09:37:38] Setup.exe: get_CustomProperties() [07/04/08,09:37:39] Setup.exe: GetCustomProperties() [07/04/08,09:37:39] Setup.exe: get_CustomProperties() [07/04/08,09:37:39] Setup.exe: GetCustomProperties() [07/04/08,09:37:39] Setup.exe: get_CustomProperties() [07/04/08,09:37:39] Setup.exe: GetCustomProperties() [07/04/08,09:37:39] Setup.exe: get_CustomProperties() [07/04/08,09:37:39] Setup.exe: GetCustomProperties() [07/04/08,09:37:39] Setup.exe: get_CustomProperties() [07/04/08,09:37:39] Setup.exe: GetCustomProperties() [07/04/08,09:37:39] Setup.exe: get_CustomProperties() [07/04/08,09:37:39] Setup.exe: GetCustomProperties() [07/04/08,09:37:39] Setup.exe: get_CustomProperties() Ive got lots more logs, but i cant attach them as the message is too big then. The only other thing that mmight be of use was the errorlog.txt - this has the following in [07/04/08,08:35:48] setup.exe: [2] continue setup link may not work properly. Please relaunch via add remove programs or from CD. [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an InstallProblem while trying to set install action override: Microsoft Exchange Messaging and Collaboration Services [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an InstallProblem while trying to set install action override: Microsoft Exchange System Management Tools [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an InstallProblem while trying to set install action override: Microsoft Exchange Domain Preparation [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an InstallProblem while trying to set install action override: Microsoft Exchange Forest Preparation [07/04/08,08:36:06] setup.exe: [2] Could not set IR_MAINT on component: Updating Configuration [07/04/08,08:38:00] WizardUI: [2] ISetupManager::GetGlobalCustomProperty() failed in CPageBase::GetGlobalProperty(): GUID = {F205AE18-9D39-4E3C-A4BA-12FBA060ED91} [07/04/08,08:44:40] Microsoft Integration: [2] ISetupDataFile::GetPropertyValue() failed for account information in ISetupManager::LoadPersistantComponentData(): filename = C:\Documents and Settings\Administrator\Local Settings\Temp\SIT29289.tmp\REBOOT.INI, component ID = {829300FF-C155-11D2-92EF-00C04F79F1A8}\{DC3074B0-7DE8-43C5-B907-E9100CB5FFF2}, property name = (null) [07/04/08,08:44:40] Microsoft Integration: [2] ISetupDataFile::GetPropertyValue() failed for account information in ISetupManager::LoadPersistantComponentData(): filename = C:\Documents and Settings\Administrator\Local Settings\Temp\SIT29289.tmp\REBOOT.INI, component ID = {829300FF-C155-11D2-92EF-00C04F79F1A8}\{F333D98A-C152-11D2-92EF-00C04F79F1A8}, property name = (null) [07/04/08,08:44:41] Microsoft Integration: [2] ISetupComponent::SetInstallActionByUniqueID() failed in ISetupManager::LoadPersistantComponentData(): component name = {685BC054-BB6F-46DB-8DB2-C2DB17DE3E8F}\{1F3267B2-721A-49E5-B688-3A10B81C0A8D}, action id = 2 [07/04/08,08:44:41] setup.exe: [2] ISetupManager::AddGlobalCustomProperty failed in ISetupManager::LoadPersistantData() ({df8ff64a-1967-4871-9e32-ca2f819bab81}) [07/04/08,08:44:42] setup.exe: [2] ISetupManager::AddGlobalCustomProperty failed in ISetupManager::LoadPersistantData() ({c248d3e3-632d-4435-888a-83035c144737}) [07/04/08,08:48:04] WizardUI: [2] ISetupManager::GetGlobalCustomProperty() failed in CPageBase::GetGlobalProperty(): GUID = {FBCCE6F3-9E2D-464D-A4E7-12FBFD515395} [07/04/08,08:48:04] WizardUI: [2] ISetupManager::GetGlobalCustomProperty() failed in CPageBase::GetGlobalProperty(): GUID = {FBCCE6F3-9E2D-464D-A4E7-12FBFD515395} [07/04/08,08:49:42] Server Configuration: [2] Admin: Couldn't get group container for [LDAP://CN=Internet Users,OU=Security Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local] [07/04/08,08:49:42] Server Configuration: [2] Admin: Couldn't get group container for [LDAP://CN=Internet Users,OU=Security Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local] [07/04/08,08:49:43] Server Configuration: [2] Admin: Couldn't get group container for [LDAP://CN=Internet Users,OU=Security Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local] [07/04/08,08:49:43] Server Configuration: [2] Admin: Couldn't get group container for [LDAP://CN=Internet Users,OU=Security Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local] [07/04/08,09:20:18] Monitoring: [2] The instance ID in monitoring reg key is bogus, deleting... [07/04/08,09:20:18] Monitoring: [2] RegOpenKeyEx(Software\Microsoft\Microsoft SQL Server) failed with 80070002 [07/04/08,09:22:04] Networking: [2] An error occurred while copying files for the Networking component. See C:\Program Files\Microsoft Integration\Windows Small Business Server 2003\Logs\SBSMSI-Connectivity.LOG for the list of files that were not copied. You may want to run Setup again and reinstall the component. [07/04/08,09:22:05] Intranet: [2] Failed to get version regkey in CClientX::HrGetSTSVersion. This is a clean install of ClientX. [07/04/08,09:26:53] Client Deployment: [2] Failed to set DACL to C:\Program Files\Microsoft Windows Small Business Server\ClientSetup\Clients [1] [07/04/08,09:26:53] Client Deployment: [2] Failed to set DACL to C:\ClientApps [1] [07/04/08,09:27:00] Client Deployment: [2] Error copying service packs with error [3]. Any help on this would be great. Tag: fail to initialize Tag: 115926
  - 3
    - Printer deployment Hi, I have a problem with some printer. I deployed 3 printers on Windows 2k3 R2 using print management, it all worked fine printers were deployed. I have subsequently had to replace a printer as it reached the end of it's life, I have replaced the printer and deployed it OK however I am unable to remove the old printer, in Print Management I have removed the printer but it still appears on all desktops it was deployed to, if I delete the printers from the PC they reappear. Is there any way I can completely remove the printers so they do not install themselves. Thanks, Jo Tag: fail to initialize Tag: 115924
  - 4
    - supply fendi versace dior armani prada lv sunglasses & sandals at Discount Coach Sandals, Dior Sandals, Prada Sandals, Chanel Sandals, Versace Sandals, Crocs Sandals, LV Sandals, ( G U C C I ) Sandals, UGG Sandals, Burberry Sandals, Women's Sandals Men's Slippers From China Discount, Prada Sunglasses, Discount, D&G Sunglasses, Discount, Fendi Sunglasses,Discount,Burberry Sunglasses Discount, Chanel Sunglasses Discount, LVSunglasses Discount, Dior Sunglasses Discount, (G U C C I ) Sunglasses Discount, ArmaniSunglasses Discount, Versace SunglassesDiscount, A&F Sunglasses Discount, LV Sunglasses For more products pls visit: http://groups.google.com/group/sci.electronics.design/browse_thread/thread/810c9501e1294f2d/7d29dbf8ba6d6efa?hl=en&lnk=st&q=edhardy+t-shirts#7d29dbf8ba6d6efa Tag: fail to initialize Tag: 115920
  - 5
    - Problem with Microsoft WHEA Logger after migrating to 2008 Hello, since we reinstalled our domain Controller in Windows 2008, we have every few minutes a warning from the "Microsoft-Windows-WHEA-Logger", concerning a "Memory Hierarchy Error". The server is a HP DL380 with 4 gigs of RAM, 32 gigabyte SCSI-disk,... I already ran the Memory Diagnostics Tool included in Windows 2008, but it showed me no errors Here is the detail about the event, perhaps some idea what could be the cause: Error Source: Corrected Machine Check Error Type: Memory Hierarchy Error Processor ID Valid: Yes Processor ID: 0x6 Bank Number: 0 Transaction Type: Generic Processor Participation: N/A Request Type: Snoop Memory/Io: N/A Memory Hierarchy Level: Level 1 Timeout: N/A Event Xml: <Event xmlns=3D"http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name=3D"Microsoft-Windows-WHEA-Logger" Guid=3D"{c26c4f3c-3f66-4e99-8f8a-39405cfed220}" /> <EventID>19</EventID> <Version>0</Version> <Level>3</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x8000000000000000</Keywords> <TimeCreated SystemTime=3D"2008-07-08T04:45:38.589Z" /> <EventRecordID>3051</EventRecordID> <Correlation ActivityID=3D"{DBC18E92-DD0E-4B8F-9E77-39CE5828C6B7}" / > <Execution ProcessID=3D"1412" ThreadID=3D"3020" /> <Channel>System</Channel> <Computer> name </Computer> <Security UserID=3D"S-1-5-19" /> </System> <EventData> <Data Name=3D"ApicIdValid">1</Data> <Data Name=3D"ApicId">0x6</Data> <Data Name=3D"MCABank">0</Data> <Data Name=3D"MciStat">0xcc00001f20040189</Data> <Data Name=3D"MciAddr">0x1824100</Data> <Data Name=3D"MciMisc">0x1400002d012a0</Data> <Data Name=3D"ErrorType">9</Data> <Data Name=3D"TransactionType">2</Data> <Data Name=3D"Participation">256</Data> <Data Name=3D"RequestType">8</Data> <Data Name=3D"MemorIO">256</Data> <Data Name=3D"MemHierarchyLvl">1</Data> <Data Name=3D"Timeout">256</Data> <Data Name=3D"Length">1730</Data> <Data Name=3D"RawData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ata> </EventData> </Event> Best regards paulreims Tag: fail to initialize Tag: 115916
  - 6
    - A HOT SHOCKING NEWS FROM MICROSOFT.... TODAY A BIG HOT NEWS FOR EVERYONE FOR MORE DETAILS ON http://polticsinfs.blogspot.com Tag: fail to initialize Tag: 115914
  - 7
    - DHCP server with no active directory Hi, Is there any way to run DHCP server on a standalone server without installing active directory? Thanks, ED Tag: fail to initialize Tag: 115912
  - 8
    - domain change - copy user profiles If I remove an XP client from one active directory domain and then join the same client to another one, is there a way to copy the profile so that the programs and icons will stay the same? I know how to copy profiles in the XP client, I'm just wondering if it works when you remove from a domain and then join a completely different one. Thanks, TJ Tag: fail to initialize Tag: 115911
  - 9
    - boot problem Hi I have windows XP pro on my current system "c:/windows" SATA DRIVE 250GB I have installed another "D:/" SATA drive and copied windows 2003 server image. Bios have boot option "SATA Drive" only no option of disk selection along with other floppy/cd options. Problem is I cannot use dual boot. If I disbale first drive which have win xp then I can boot and run windows 2003 server if I enable first drive it goes to XP not giving me any option to boot through win 2003. I have tried to change boot.ini but no luck Can any one guide me how I can use as dual boot . What entries should I do to use boot ini. My Currrent boot.ini something like this. [boot loader] timeout=30 default=multi(0)disk(0)rdisk(0)partition(2)\WINDOW S [operating systems] multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="Micro soft Windows XP Professional" /noexecute=optin /fastdetect multi(1)disk(0)rdisk(1)partition(1)\WINDOWS="Windo ws Server 2003, Enterprise" /noexecute=optout /fastdetect I have tried this soloution as well. Enable both drives. Insert Windows XP bootable cd into your CD Rom drive and boot from it. At the first prompt select second option "Press "R" to enter recovery console" You'll be asked for Administrator's password, if any. Select you Window Xp installation by enter number 1 or 2, when prompted. You are now on command line. Type following command Code: bootcfg /addYou'll be asked "Which windows installation do you want to add?" Select the installation, in your case Window server 2003, to add in the list. Reboot your system. Thanks in advance and Regards Tag: fail to initialize Tag: 115909
  - 10
    - Windows Explorer Navigation Pane In Windows Server 2008 and Vista, is there any keyboard shortcut to quickly enable or disable the Navigation pane? I already know how to click Organize / Layout / Navigation Pane, but I'm hoping for a one-step shortcut. Thanks! -- Joseph Tag: fail to initialize Tag: 115908
  - 11
    - Page File out of Space Hello, We inhereted a configuration with two hard drives configured on one controller with a capacity of 75Gb total. 32Gb is being used for the OS mirrored. The drive has been partitioned in order to seperate the page file from the OS with 45Gb. Currently the page file is running low with only 11Mb left in use. Is there a way to fix the problem of why would it use up all the paging? We recently loaded up the server with 4Gb of RAM from running only on 2Gb. Any help would be appreciated. Thank you George Tag: fail to initialize Tag: 115906
  - 12
    - Robocopy job errorl with "The handle is invalid" on a large (161GB) I'm trying to use robocopy to do a restartable-copy (/ZB) of a backup image from my server to a full-disk encrypted (truecrypt) hard drive. Whenever robocopy gets to 94.4% of the file though, it starts bombing out saying that "The handle is invalid." The whole message is... ----------------------------------------- 2008/07/07 14:25:20 ERROR 6 (0x00000006) Copying File \\server\share \file The handle is invalid. Waiting 30 seconds... Retrying... ----------------------------------------- It just sits there and keeps retrying. If I kill the job and try to restart it, it starts over from the begining, the /ZB switch isn't working. Is there some size limit for robocopy? I could have sworn that I've copied files larger than this with no problem, but this one just won't take. For reference, I'm copying from sbs2003 SP2 to vista SP1. Any ideas??? Thanks, Mesan Tag: fail to initialize Tag: 115905
  - 13
    - What is the Software Distribution Directory? We have a Windows 2003 Server DC and I was looking at the used space. While looking at the Windows directory I noticed a subdirectory called Software Distribution. A subdirectory of that was Download. There is a total of about 800MB of files in this directory. Some of the files are a few years old. What is this folder and can any of these files be deleted without any negative affect on the system? Tag: fail to initialize Tag: 115901
  - 14
    - Windows Scheduled Task maxed out I am almost maxed on the number of scheduled tasks that I can create. I heard of a registry edit that over comes this limition when using a user account to run the task. does anyone know how to resolve this? I read the kb article about stopping and starting the task service to be able to add another task but that is not a real solution for us. Tag: fail to initialize Tag: 115894
  - 15
    - Windows cannot obtain the domain controller name for your computer network "Windows cannot obtain the domain controller name for your computer network. (An unexpected network error occurred) Group Policy processing aborted." This is from the Application log of the server itself (SBS2003)! Repeats every 5 minutes. Have spent ages trying to find solution without success. I suspect it has to do with MS Virtual PC 2007. I need it to run tests on Windows 2000, XP and Vista without having to have any more hardware. Typically have 2 or 3 virtual PCs running at the same time. They also report Winlogon and Browser failures but browse network fine. Some are domain members others are on the same name workgroup. Server otherwise functions OK with occasional slowness in web browsing probably due to DNS issues when it forgets its own name. It sits on the green channel of IPcop Linux based router and is itself the DHCP server. Making IPcop the DHCP server makes no difference. Any ideas? Tag: fail to initialize Tag: 115893
  - 16
    - creating schtasks to run for a date range every month I am attempting to use schtasks to create some scheduled tasks to run on a monthly basis but am having trouble figuring out the right syntax to get the desired behavior. Basically, I want to run a batch file every day (during the desired date range) starting at a specific time. Some examples: I want a batch file to run every 23rd-30th of each month, starting at 1:00am. I want a batch file to run every 23rd-30th of each month, starting at 10:00am. I want a batch file to run every 15th-21st of each month, starting at 1:00am. I want a batch file to run every 15th-21st of each month, starting at 10:00am. The day-of-month range would be the same every month. There doesn't appear to be a way to specify more than one day, or a day range with the /d parameter. Is the only way to accomplish this to create a separate scheduled task for each day of my desired range? Thanks in advance for any help. Roy Berger Tag: fail to initialize Tag: 115891
  - 17
    - Time server inaccessible Windows Server 2003, SP2, only DC in domain, running AD, DNS, File&Print. W32time gives this series of events in the System log: Information, ID 38: The time provider NtpClient cannot reach or is currently receiving invalid time data from nist.netservicesgroup.com (ntp.m|0x0|x.x.x.x:123->y.y.y.y:123) (where x.x.x.x and y.y.y.y are IP addr. of local and time servers, respectively). Warning, ID 47: Time Provider NtpClient: No valid response has been received from manually configured peer nist.netservicesgroup.com after 8 attempts to contact it. This peer will be discarded as a time source and NtpClient will attempt to discover a new peer with this DNS name. Error, ID 29: The time provider NtpClient is configured to acquire time from one or more time sources, however none of the sources are currently accessible. No attempt to contact a source will be made for 15 minutes. NtpClient has no source of accurate time. I have scrupulously followed the instructions in KB816042. Using nistime-32bit.exe, which also claims to be using UDP port 123, I can get a response from this same server. Any help appreciated. -- TedMi Tag: fail to initialize Tag: 115890
  - 18
    - Quickie on DHCP Split Scope and reservations Hi I am setting up 80/20 split DHCP I have a range 10.140.0.1 to 10.140.9.254 which I have setup on both servers Server 1 has exclusion of 10.140.8.1 to 10.140.9.254 (80% server) Server 2 has exclusion of 10.140.0.1 to 10.140.7.254 (20% server) My question is if I need a reservation for a clicnt with IP say 10.140.0.50 I would obviously set this up on Server 1 but what about server 2 as this address is excluded? What happens to if server 1 is offline? Thanks Tag: fail to initialize Tag: 115886
  - 19
    - Listen port is still open after the process was killed (or quit) Hi, We have a process which use TCP port xxxx as the listener port of service. Now we killed the process (or the program quit) for some reason, but the port xxxx is still open when we monitor it using netstat command and we can not restart our daemon because of the opening port. Can I close port och quit it? This is Windows2008 server. Thanks Pierre Tag: fail to initialize Tag: 115885
  - 20
    - watch actress sexy photo from movie clips http://priyamaniforyou.blogspot.com/ watch actress sexy photo from movie clips http://priyamaniforyou.blogspot.com/ Tag: fail to initialize Tag: 115884
  - 21
    - Upgrading Windows CA Authority Hi, I have a windows 2000 CA that I want to remove from the network. I want to replace this with a 2003 CA but the standard process poses some problems The MS suggested Upgrade/Migration process states 1. Upgrade the 2000 CA to 2003 before migration - the problem here for me is the 2000 DC is very old and I'm fairly confident it wouldn't be sufficient for W2003 2. The new CA should have the same name as the old CA - I already have all the required servers setup and running. Further I would prefer not to have a server named the same as the old one. My question is - considering my preferred network setup requires that I move to a new server with a different name I was thinking that I would follow the process http://support.microsoft.com/kb/889250 to remove the CA that is currently installed on the 2000 DC/CA, remove the 2000 DC/CA then install a brand new 2003 CA on a different server with a different name. Can anyone tell me if there are any implication when doing this. Note: The only Certificate I have manually configured is a Certificate that has been installed for use with Exchange 2003 Outlook Web Access Thanks Tag: fail to initialize Tag: 115881
  - 22
    - Hostname change problem Dear Friends... We have DC at our corporate office & each ADC at our site location.there are 22 location & for each location OU is created in AD. We have single domain.There are nearly 3000 Desktops & servers in whole domain.all desktops are member of OU respective of their site in AD. One Wsus server is installed for patch management & for each site,respective container is created & for each location wsus policy template is applied in AD, Problem:- When ever our desktop engineer on site location, format any desktop so they also change the computer name [Host name].As they never think to give the same old Hostname after installation of desktop. & when they make server as a member of Domain the , Domain server make the Desktop As member of default container =93computer=94 But according to site name this should be the member of its respective OU. Similarly hostname is also not updated in WSUS What should we do to sort out the issue. Can we create any script or bat file & run file after the installation of OS on desktop. Waiting for response .. Thanks in Advance=85 Gaurav Tag: fail to initialize Tag: 115875
  - 23
    - Exchange 2003 into an existing 2000 network Hi peeps, I will be installing a new exchange server into a 2000 domain which already has an exchange (2000) server in. I've found this migration document on the internet http://www.msexchange.org/tutorials/Migrating-Exchange2000-Exchange-2003-Hardware.html but my query is doing the adprep on the existing domain controller (2000 server) is that going to cause and future problems or will it be ok in the log run. David Tag: fail to initialize Tag: 115874
  - 24
    - Hostname change problem Dear Friends... We have DC at our corporate office & each ADC at our site location.there are 22 location & for each location OU is created in AD. We have single domain.There are nearly 3000 Desktops & servers in whole domain.all desktops are member of OU respective of their site in AD. One Wsus server is installed for patch management & for each site,respective container is created & for each location wsus policy template is applied in AD, Problem:- When ever our desktop engineer on site location, format any desktop so they also change the computer name [Host name].As they never think to give the same old Hostname after installation of desktop. & when they make server as a member of Domain the , Domain server make the Desktop As member of default container =93computer=94 But according to site name this should be the member of its respective OU. Similarly hostname is also not updated in WSUS What should we do to sort out the issue. Can we create any script or bat file & run file after the installation of OS on desktop. Waiting for response .. Thanks in Advance=85 Gaurav Tag: fail to initialize Tag: 115873
  - 25
    - Bvlgari B.zero1 Steel and Rubber Bangle Ladies Watch 101196, Best Bvlgari B.zero1 Steel and Rubber Bangle Ladies Watch 101196, Best Luxury Watch - www.luxury-gift.org Luxury Gift : http://www.luxury-gift.org Bvlgari Watches : http://www.luxury-gift.org//bvlgari-watches.html Bvlgari B.zero1 Steel and Rubber Bangle Ladies Watch 101196 Link : http://www.luxury-gift.org/Watches/bvlgari-watch-333.html Bvlgari B.zero1 Steel and Rubber Bangle Ladies Watch 101196 Information : Brand : Bvlgari Watches Series : Bvlgari B.Zero1 Code : Bvlgari-101196 Gender : Ladies Case Material : Stainless Steel Dial Color : Black Bracelet Strap : Stainless Steel and Black Rubber Movement : Quartz Clasp Type : Deployment Bezel : Crystal : Scratch Resistant Sapphire Case Back : Case Diameter : 22mm Case Thickness : Water Resistant : 30m/100ft Stainless steel case. Black rubber covered stainless steel bracelet. Black dial. Scratch resistant sapphire crystal. Deployment clasp. Case diameter 22mm. Quartz movement. Water resistant at 30 meters (100 feet). Bvlgari B.zero1 Steel and Rubber Bangle Ladies Watch 101196 Link : http://www.luxury-gift.org/Watches/bvlgari-watch-333.html Tag: fail to initialize Tag: 115872
- Next
  - 1
    - Longines La Grande Classique - Stainless Steel L4.241.0.12.6 Longines La Grande Classique - Stainless Steel L4.241.0.12.6 (L42410126), Best Luxury Watch - www.luxury-gift.org Luxury Gift : http://www.luxury-gift.org Longines Watches : http://www.luxury-gift.org//longines-watches.html Longines La Grande Classique - Stainless Steel L4.241.0.12.6 (L42410126) Link : http://www.luxury-gift.org/Watches/longines-watch-1505.html Longines La Grande Classique - Stainless Steel L4.241.0.12.6 (L42410126) Information : Brand : Longines Watches Series : La Grande Classique - Stainless Steel Code : L4.241.0.12.6 (L42410126) Gender : Ladies Case Material : Stainless Steel Dial Color : White Bracelet Strap : Stainless Steel Movement : Quartz Clasp Type : Hidden Folding Clasp Bezel : None Crystal : Scratch Resistant Sapphire Case Back : Solid Case Diameter : 24mm Case Thickness : 5mm Water Resistant : 30m/99ft. <li>Stainless steel case and bracelet.<li>Bezel set with 48 diamonds (aprox. 0.48 carats).<li>White Dial with Index hour markers.<li>Reliable Swiss made Quartz Movement. Longines La Grande Classique - Stainless Steel L4.241.0.12.6 (L42410126) Link : http://www.luxury-gift.org/Watches/longines-watch-1505.html Tag: fail to initialize Tag: 115871
  - 2
    - Which is More Powerful Hello, I have the following: 1. Compaq Proliant 5500, Quad Xeon Processors at 733 MHz and 1 Gig of RAM. 2. 1 Compaq Proliant DL580, Dual PIII-733 MHz and 1 Gig of RAM. 3. 1 Compaq Proliant DL380, Dual PIII-733 MHz and 1 Gig of RAM. Which of the 3 computers is more powerful for web hosting? What is the "best" practice for configuring the 3 systems for web hosting?? Thank you, Charles L. Phillips Tag: fail to initialize Tag: 115867
  - 3
    - Adding 2000 server to 2003 Domain Hi, Does anyone know of any issues in adding a 2000 server to a 2003 (R2) domain - as a domain controller or plain file server. I looked about but not much on this. Thanks. Tag: fail to initialize Tag: 115864
  - 4
    - how to change user to LIMITED from ADMINISTRATOR, on Win XP In "User Accounts" on Windows XP, I currently have a user named John who is a "Computer Administrator". I'd like to change this account to "Limited", but it's greyed out, so I can't even select "Limited" as an option. Also, I don't even see a user that is named "Administrator". How do change user "John" from "Computer Administrator" to "Limited" ? Tag: fail to initialize Tag: 115861
  - 5
    - Limit remote acces to server Hi Is it possible to limit remote access to Win2k3 server so that you could remote connect only to the console session (mstsc.exe /console)? If I disable remote access than also /console switch doesn't work, but if I set that only 1 connection is possible to server, it is possible that besides /console session another admin logs into server, but I want that /console session will be the only way to remotely connect to a server. Thank you in advance Regards, Miha Tag: fail to initialize Tag: 115860
  - 6
    - problem with mouse/touchpad using 2nd. monitor When I use big screen LCD TV as monitor, mouse and touch pad become erratic or simply do not work right, any ideas why? on it's own np's, changed mouse and that is not the problem soooo?? Tag: fail to initialize Tag: 115858
  - 7
    - LATEST SHOCKING HOT NEWS FROM MICROSOFT....... YES ITS REALLY HEART BREAKING NEWS FOR EVERYONE http://polticsinfs.blogspot.com/ Tag: fail to initialize Tag: 115856
  - 8
    - server 2003 help have a server 2003 box in which there is either gpo or log in script that doesnt allow admin account to access services on the server need help to find a way to remove this any help greatly apreiated thank you william.hoffmann@gmail.com Tag: fail to initialize Tag: 115853
  - 9
    - 2008 Backup - Device Error? Hello Technet, When running Windows Server Backup from the Server Manager (2008) - selecting VSS full or copy backup, it reaches around 3.8gb on C: then fails with an "I/O device error". We've tried saving to alternate disks and network locations, as well as running wbadmin, same error message. It appears to be failing during the System State backup. Server has been restarted, and checked for any more recent updates, but there is no change. I've found reference to this particular error in Vista where the solution was to go to System Protection and disable Shadow Copy on the drives, then re-enable - though I cannot see the System Protection area in 2008. Shadow Copies are not currently enabled on any drive in the server, and still no change in the error message. Is there another way to fix this problem? Many thanks, Steve Copley R-NAS International Tag: fail to initialize Tag: 115852
  - 10
    - Win2k3 Standard File Server - Missing Data Hello all, I've got a Win2k3 Std SP2 file/member server in an SBS2k3 domain. This file server developed an issue where it would not connect itself to the domain. This was fixed easily with a repair reinstall, but an important issue remains: The file server uses 2 HDD which are mirrored. The HDD is partitioned into the normal system/boot partition, with a logical D drive where user data are staged. Following the OS repair/reinstall, data files for about a 6-month chunk of time simply no longer appeared on the data partition. Also lost was any kind of data file on the boot partition, such as app license files, for example. Nothing was done to attempt to restore the file server to a previous date checkpoint, or LNG, or anything of that nature. Simply the OS repair/reinstall. Of note is that VSS was not enabled for any of the partitions at this time, or previously. I have combed the drives for the MIA files with no joy. Also have run forensic data recovery on the partitions, with absolutely nothing showing up as deleted or similar for the chunk of time in question. Am at a bit of a loss right now as to how to proceed from here to find and restore the missing files. I tend to think they must be somewhere. Am I wrong? Any advice or assistance in how to proceed would be much appreciated. TIA, Fred Orcutt Tag: fail to initialize Tag: 115846
  - 11
    - I can't remember my password - what do I do? My computer is asking for my Windows password but I can't remember it. Any suggestions? Tag: fail to initialize Tag: 115845
  - 12
    - VPN data encryption type Hello, i get that error: The following error occurred in the Point to Point Protocol module on port: VPN5-127, UserName: ABC\ata. The remote computer does not support the required data encryption type. I've an ATA "analog telephone adaptor" which connects to a windows VPN 2003server and i get that nice error. i googled and i found that i MAY need to decrease the Encryption level from 128 to 40 , i'm not sure that this is the solution. because i've another windows 2003 VPN box which had that error in the past, but now working and i don't see some reason, i made identical configuration but i get same error i don't know what to do ,, any Help or redirection would be greatly apperciated Thank you A. Sabry Tag: fail to initialize Tag: 115844
  - 13
    - =?ISO-8859-1?B?LqmpqampqakgLS0gQWN0cmVzcyBTZWNyZXQgQk9USCBST09NIHNjZW5lcyAt?= HAI.......... Guys this web site s very useful to you........... How This site helps.......... how to earn money form online...... In this site, you wil earn more than 10000/- Rs per month.... its true ....... just login this site and << EARN MONEY >> www.freeonlinedollers.blogspot.com www.freedollers.blogspot.com Tag: fail to initialize Tag: 115836
  - 14
    - Dunhill Lighter DuL07031 - www.luxury-gift.org Dunhill Lighter DuL07031 - www.luxury-gift.org Luxury Gift : http://www.luxury-gift.org Dunhill Lighter : http://www.luxury-gift.org/Lighter/Dunhill-Lighter.html Dunhill Lighter DuL07031 Link : http://www.luxury-gift.org/Lighter/Dunhill_Lighter_DuL07031.html Dunhill Lighter DuL07031 Information : Brand : Dunhill Lighter Code : DuL07031 Description : 2007 new design Dunhill Luxury high quality Gas Lighter Very heavy and strong construction. Ion Plating Gold gold 18k polished steel. Weight to exact original. Dimension: 37 mm by 62 mm by 11 mm. Comes with box. Note: we will ship the lighter without gas inside,please prepare yourself. because the gas is tinder,prohibition for shipping. Dunhill Lighter Link : http://www.luxury-gift.org/Watches/Dunhill_Lighter_DuL07031.html Tag: fail to initialize Tag: 115833
  - 15
    - nike air force shoes AFS071058 - www.luxury-gift.org nike air force shoes AFS071058 - www.luxury-gift.org Luxury Gift : http://www.luxury-gift.org af shoes : http://www.luxury-gift.org/Shoes/af-shoes.html nike air force shoes AFS071058 Link : http://www.luxury-gift.org/Shoes/air_force_shoes_AFS071058.html nike air force shoes AFS071058 Information : Brand : af shoes Code : AFS071058 Description : nike air force one men's shoes Dwyane Wade's first signature shoe signifies his arrival as the leader of a new generation of students of the game. Inspired by his passionate energy and reckless abandon on the court, the Wade performance shoe lets you discover a new game, the creation of that new generation. Class is ready to begin, and it starts with the Wade. nike air force shoes Link : http://www.luxury-gift.org/Watches/air_force_shoes_AFS071058.html Tag: fail to initialize Tag: 115832
  - 16
    - system restoring after disaster Hello I use Veritas Backup exec 10d. I conmsider situation when my servers will be totaly destroyed. I know that I able to recover system and all data with IDR whan new server will be exacly like old one. But can I use IDR to restore system/data using different server I mean with different configuraton from different producer ? Thanks in advance Mike Tag: fail to initialize Tag: 115821
  - 17
    - Support for SysInternals Tools Does anyone know how Microsoft is doing support for the SysInternals tools it purchased from the company of the same name? I want to submit an online ticket and I know at one time they had a support staff that specialized in that tool. When I sent email to one of them it bounced back as "Access Denied". -- Will Tag: fail to initialize Tag: 115820
  - 18
    - Continue with existing session Hi, I have got a machine with no keyboard mouse and screen, so I have to control it with remote desktop. I have set it to auto-logon and creates as session automatically, which list's the sound card and uses it. When I connect via remote desktop it creates a new session which I do not want, I want to continue with the one that was create by auto- logon. I can change via task manager but I want it to join that specific one, is there a way to do this? I have tried /console and it does not work and I have restricted the user to one sessions but that does not work either Tag: fail to initialize Tag: 115816
  - 19
    - Packet/Traffic Analysis Hello all, I'd like to monitor traffic flowing through my server 2003 server, and if possible be more specific i.e. something came in on Port 80 and was accessing www.domain.co.uk It's so I can see what traffic is more commonly seen, where it's going, etc and be able to display it in a nice graph, or chart, etc. also, would the same software be able to monitor an external NIC from a remote location to see what traffic is going through that as well as the server NIC? i.e. if I have a load balanced setup I'd like to see what is coming into the router as well as what is coming into each server. Does anyone know of anything? Thanks all Chris Tag: fail to initialize Tag: 115812
  - 20
    - Cannot login: Server 2003 - Warren Post Hi...on joining the domain your system file got currupted which you need to repair using some third party software or windows installation disc If you are able to login in command mode try to use thsi command but make sure you have installation media from where you installed the windows server 2003. Insert the disc and type sfc /scannow If it ask you the path of Disc please assign manually.... It will repair the system files. Tag: fail to initialize Tag: 115811
  - 21
    - command prompt should not display.. - Gaurav create a shortcut to the batch file and run the shortcut (lnk) file as a Scheduled Tasks. The shortcut can be set to run in minimized mode by right clicking the shortcut and selecting it to run minimized from the options Tag: fail to initialize Tag: 115808
  - 22
    - Windows Server 2003 Backup. We are running Windows Server 2003 on an HP Proliant ML350 G4. We are using a Quantum DLT8000 tape backup device. The problem we are having is that the backup never completes successfully. We are trying to back up around 52GB of data split across three hard disks. The Hardware Compression is switched on on the tape drive and our backup command has the /hc:on switch. The tape is a 40/80 GB tape. Service Pack 2 for Windows Server 2003. I have also added the /UP switch to the backup command. The following entry is dropped in the Application Log: Event Type: Error Event Source: NTBackup Event Category: None Event ID: 8001 Date: 04/07/2008 Time: 12:47:05 User: N/A Computer: VNI3 Description: End Backup of 'E:' 'Warnings or errors were encountered.' Verify: On Mode: Append Type: Normal Consult the backup report for more details. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. followed by: Event Type: Error Event Source: NTBackup Event Category: None Event ID: 8019 Date: 04/07/2008 Time: 12:47:10 User: N/A Computer: VNI3 Description: End Operation: Warnings or errors were encountered. Consult the backup report for more details. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. We are using tapes which have been marked as free. The backup log is trucated mid entry and there are no entries in the log file staing what has happened. Any ideas? Tag: fail to initialize Tag: 115804
  - 23
    - Excluding folders from My Document Redirection Hello, I have implemented a Test environment as our company is soon going to implement a policy for EXCLUDING My Music from folder redirection. (As users have a lot of music crap, we think it should remain locally on the machine and should not be stored on the server.) My Test Environment: 1 Windows 2003 BOX, Windows XP machine. Locally networked. Folder Redirection: Works fine. All the My Documents is redirected to \\TESTSERVER\UserData\Username\User Documents Roaming Profile: Roaming Profile is also implemented and user profiles are stored here: \\TESTSERVER\Profiles\Username On the internet I found dozens of articles talking about creating a ADM file for excluding My Music folder. These articles basically talk about creating an ADM which edits a registry entry of "ShellFolders" which edits the "My Music" location. So I created the ADM file which edits the ShellFolder and points it to %user profile%\My Music Here is how 2 seperate GPOS are applied: Please see this Picture: http://img56.imageshack.us/img56/245/picture1fw7.jpg As you can see in the Picture > 1. 1 GPO For Folder ReDirection > 2. Other GPO For My Excluding My Music However I still can see My Music in My Documents. When I check in the registry on Windows XP machine the entry for ShellFolders is \\TESTSERVER\..... instead of %userprofile%\My Music I am referring to these links on the internet: http://www.eggheadcafe.com/software/aspnet/31171752/exclude-my-music-from-red.aspx http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/2003_Server/Q_21811952.html?sfQueryTermInfo=1+exclud+group+music+polici+redirect Is there anyway by which My Music can be excluded in folder redirection. Has someone ever implemented this? If yes please share how? Regards, Tag: fail to initialize Tag: 115803
  - 24
    - GPO Vista Issue Hi, Apologies in advance from a "newbie" here if this is the wrong forum- seems the most appropriate on Google Newgroups. I manage our school network- nothing too exciting- 3 servers running Server 2003, mandatory profiles for the pupils and GPO objects to lock down the desktop managed through Active Directory. I am experimenting with Vista on our client machines at present and have some very weird issues. I've set up new GPO objects and the repository as explained in the Vista help guides for GPO, and edited them with the MMC plug in on a Vista machine. I have set up the Vista machine, joined it to the network, and then logged in as a pupil. The first time the pupil logs in, the desktop lockdown GPO objects all apply and the computer works as expected. However, if that pupil logs into the same machine again, the GPO is no longer applied. Which is very odd. Any suggestions or advice gratefully received before it drives me completely mad! Cheers, Steve Tag: fail to initialize Tag: 115800
  - 25
    - Networking issue Hi All, Please could someone help else .... I have a desperate problem with my machine at work when i try to syncronize with folders and files over the network. It can Literally take all night and even a few hours during the day to actually syncronize my PC to the Server connected at a different site. This for me is now approaching desperation and i am seriously considering quitting my job over it. I have a windows XP machine which connects to a Cisco 2950 switch which then connects to a Cisco 800 router - it passes a firewall into the cloud back through the firewall into a F&P server in a different town. I am unsure as to how many hops it passes but i suspect the problem may be that either or both of the switches are set to 10 mbps rather than 100. i am unsure of why the Cisco 800 router is there. Can anyone explain given the above information of what might be causing the syncronize to take as long as it is. Just to explain further - once i have syncronized all folders/files i only have to correct some text on ONE FILE but still get the sync problem. Any information on the above would be very useful. If anyone requires any further information please let me know. Kind Regards. -- Flinty Tag: fail to initialize Tag: 115799

help me please!!! every time I start a game, it gives me an error, failed to
initialize direct3d. I've updated directx to the latest, troubleshooter says
all is fine, and acceleration is full. What else can I do?????

Top

Re: fail to initialize by Meinolf

Meinolf
Wed Jul 09 06:33:11 PDT 2008

Hello RedDragon,

That's not much information you gave. Sounds like a hardware problem, so
check that the graphic card drivers are the newest. Also describe your hardware
setup and OS you are using. Additional you could have a look on the webpage
from the gamevendor.

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

> help me please!!! every time I start a game, it gives me an error,
> failed to initialize direct3d. I've updated directx to the latest,
> troubleshooter says all is fine, and acceleration is full. What else
> can I do?????
>

Top