defrag for users

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - WSUS Setting question Does anyone know why the 'Allow Basic authentication (password is sent in cleartext)' checkbox on the Proxy Server Tab of the Update Source and Proxy Server settings in Options does not remain checked. This is only happening on my newer Server 2k3 R2 Enterprise X64 edition SP2 Server. I have two WSUS servers one for two seperate AD Forests and the other Server is Running Server 2k3 R2 SP2 Standard 32 bit. My syncs fail on the new one until I recheck that box and immediately do another sync. Tag: defrag for users Tag: 109981
  - 2
    - connecting to the CONSOLE using mstsc command using - instead of / Server 2003 SP2 Hi, This one should be a no-brainer: Will the following commands do the EXACT same thing? mstsc /console mstsc -console I have some colleagues here who insists using mstsc /console & say mstsc -console is wrong. I've used mstsc -console for years and never had a problem. Yes, I have looked at the help associated with the command using mstsc /? and mstsc -? In fact, if this command didn't accept the "-" it would fail. Please help me settle this guys. Thanks Tag: defrag for users Tag: 109979
  - 3
    - Apple Macs connecting to SMB file shares I have several apple macs (10.4 & 10.5) connecting to files shares on our 2003 R2 server (which is a domain controller). They can connect fine using AFP (but files get truncated) and if I try to connect them via SMB you get several different errors relating to permission access or can not mount the volume but connecting via AFP is fine our via a PC. Now.......yesterday I setup a test share on the 2003 R2 domain member server, SMB connections worked perfectly. The share and folder permission were exactly the same as the original file server? I have tried also creating a new GPO and binded the macs to the domain and set the GPO to KB555652 which changes the digital signing of communications. I would prefer to keep the file shares on the main file server. Any ideas? Tag: defrag for users Tag: 109959
  - 4
    - Grovel.exe error nothing on the web can anyone help..?? Dear All Every time we restart our RIS server Grovel.exe fails. The error is really simmilar to http://support.microsoft.com/kb/939383 (but not quite the same) 2003 SVR running SP2 APPLICATION LOG Category. (100) Event ID. (1004) Reporting queued error: faulting application grovel.exe, version 5.2.3790.3959, faulting module grovel.exe, version 5.2.3790.3959, fault address 0x0000fecc. SYSTEM LOG Category. None EVENT ID. 7034 The Single Instance Storage Groveler service terminated unexpectedly. It has done this 1 time(s). Has anyone seen this as there appears to be nothing out there. Kr Paul Tag: defrag for users Tag: 109954
  - 5
    - windows 2003 server group policy setting to disable windows system Can anyone help me to tell how to set up group policy setting on windows 2003 server to disable systems sounds all the network computers. waiting for any help Tag: defrag for users Tag: 109952
  - 6
    - Server 2008 Administrator permissions Hello, On a Windows Server 2008 DataCenter edition box, we've made a new user called ServerAdmin and put it in the Administrators Group. Now, the original Administrator account works fine, but the ServerAdmin account has issues. If you right click on My Computer and try to go to Manage, it says permission denied. If you simply try to open the C drive, it says permission denied. Yet, I can go into the properties of the C drive and change them, after assigning ownership to the Administrators group. But even after changing the ownership (and yes Administrators group has full control on the drive) I get the permission denied error when trying to access the drive. Since the original Admin account seems fine, it must be require something other than simply assigning users to the administrators group and having them act the same or what? Any help is appreciated! -B Tag: defrag for users Tag: 109949
  - 7
    - WinServer 2003 - Tired of italic font introduced with SP2 I am tired of *everything* being in italics in Windows Server 2003 SP2. As I access it through Remote Desktop, I cannot even use ClearType, so using apps strains my eyes more than necessary. Is there any way to get rid of it and use a normal font instead? Cheers ss. Tag: defrag for users Tag: 109946
  - 8
    - Hyper V and Guest with intermittent RDP connections I have a Dell 2950 running server 2008 X64 that is giving me a heck of a time getting guests to run properly. The first issue is RDP coonections seem to drop on the host for no reason, a reboot clears this sometimes. I removed the host machine from the domain and that seemed to fix that problem along with a limited connectivity error I was getting on the hosts brodcoms NICs. I have two 2008 guests and two 2003 guests and all four of them have this limited connectivity issue. They can be added to the domain and can access the internet but RDP sessions are intermittent. I disabled the firewall on all the guests with no luck. On my host server I have one NIC dedicated with a static IP for RDP, when I installed the hyper v role I only checked the 2nd brodcom nic for it to use during the install so I cannot figure out why the network connectivity is so flaky. Tag: defrag for users Tag: 109945
  - 9
    - Windows rights management Is there any requirement that the files that are protected by WRM actually sit on a Windows file server? Can they sit on a SAN with LUNs presented to the Windows server or a NAS with CIFS shares? Thanks. Tag: defrag for users Tag: 109932
  - 10
    - Server Hardware Lif Cycle Life cycle of a server? How often to replace them? -- Eric S. Powell Network Administrator Hascal, Sjoholm & Co, P.S. Tag: defrag for users Tag: 109925
  - 11
    - Beta License getting ready to expire what now..? Ok I hope I'm not alone in this... I have the Beta 6001 build of Windows Server(R)2008 Standard and the product key I was given when loaded is about to expire. I went through my MSDN account and got a key generated for OS, however thekey is not being accepted as valid. I called support, they said they do not have a key for Windows Server 2008, there is an issue with this and they are aware of it. They suggested I call an activiation number to have my activiation extended, the people on this number had no idea as to what I was asking about. My question is simple, How do I go about getting a new product key w/o uninstalling and reinstalling the OS..? Thanks Tag: defrag for users Tag: 109920
  - 12
    - RPC dependant services wil not run I hope someone can enlighten me a bit as I have been unable to find a solution: I am running a Win 200 advanced server which cannot recieve updates except manually either on line or via WSUS. I am also running Terminal server with about 6 clients connecting who seem to be unaffected. BITS and several other services which list their dependency as the RPC service will not run most commonly with the "Error: 1068 the dependency group or service failed to start" the following services have other errors as well and will not run: Removeable Storage,--( error: 1083 the executable program that this service is configured to run in does not impliment the service) Routing and Remote Access, --,( error: 1083 the executable program that this service is configured to run in does not impliment the service) System Even Notification, --,( error: 1083 the executable program that this service is configured to run in does not impliment the service) Windows Service Pack installer service, --( Could not start... ...The service did not return an error. This could be an internal windows error or a service error.) I have looked everywhere for a solution to this but can find no documentation on how to approach this. Tag: defrag for users Tag: 109916
  - 13
    - Everything went read only on NTFS Over the last weekend I tried to do a 1.5TB data migration from an old server to a new machine using xcopy. I didn't know about robocopy at the time. The old server is running Win2K3 ES. The new server is running Win2K3R2 ES. All the data copied but when it hit the destination all the permissions on the files were either gone or wrong. So I turned the shares on the older servers back on and figured I'd try it again this coming weekend. The problem is, on the OLD servers, all the data, files and folders has been set to read only. This is on two servers. Right clicking and going to properties won't let me remove the read only. Well, it acts like it's removing it but really does not. And, the attrib command will not let me remove read only. What the heck did I do and how do I fix it??? Thanks, -brian Tag: defrag for users Tag: 109915
  - 14
    - WDS Server Management Rights Hello, I currently have setup a working WDS server. I am a network administrator with domain admin rights and have no problem connecting to the services with the MMC snapin. Ideally we want the desktop support staff to connect using the MMC and manage the images instead of a net admin. When I have the support staff connect the MMC snapin says it cannot find the service on the selected server. It works when I add them to the local admin group on the server. It is not a desirable practice to add them to the local admin group on the server. WDS will be installed on some domain controllers in the smallers which do not have local groups. How do I give the support staff rights to manage WDS without giving them any type of Admin rights? Appreciate your help. Andy Tag: defrag for users Tag: 109910
  - 15
    - Upgrading Domain Controller with Standard SP1 to R2 - fails Recently i have been upgrading all the servers to R2 with the exception of DCs. Upon upgrading one dc it prompted me to update the schema which i did with adprep /forestprep. After i ran the setup to install R2- it asks for product key to enter (so it can update the old standard to standard R2) after i enter my R2 key it comes back with invalid key. Very strange since this same product key works on all other standard servers equipped with Standard SP1 that i converted to R2. I did a little investigating to see if this only happened on that specific dc, so i try to upgrade another different dc to R2 and after i enter the product key its says invalid. I verified with microsoft that the key is correct. Has anyone ever had this issue? any solution? thanks Tag: defrag for users Tag: 109909
  - 16
    - Robocopy and specific network adapters Hello I am setting up a script for robocopy and wondered if there is a way to tell robocopy to use a certain network adapter. I have dual adapters on both servers and want to use one from each connected to a gigabit switch (not connected to the network) for the file copy. I was thinking that I could specify the ip address I am using on each one like so. robocopy "\\172.21.1.200\file" "\\172.21.1.201\file" Would this be the proper way to specify the network adapters to use? The other adapters will be on the company network, while these 2 will not. Thanks Steve Tag: defrag for users Tag: 109904
  - 17
    - Windows 2003 Domain, domain computers clocks off by an hour I just upgraded from a windows 2000 domain server, to windows 2003. The member computers on the domain all run windows 2000. For some reason all the computers on the domain are exactly one hour slow. When I run the following command via netlogon net time \\s3a-56dmz01.s3a-upland.mydomain.com /set /yes the 2000 computers all sync however they show the time zone as +7 as opposed to +8. I've gone through and verified everyones time zone and that of the server. The windows 2003 domain controller (s3a-56dmz01) is set up to sync with an external time server as per kb 816042. Any one have any ideas on this ? Tag: defrag for users Tag: 109902
  - 18
    - Move Roaming profiles All, What is the easiest way to change the roaming profile path for a large number of users in one go? We need to perform a upgrade on the server that currently hosts the roaming profile and need to change the path on approx 300 users. Tag: defrag for users Tag: 109897
  - 19
    - Scheduled Task Email Alert Is there any way to get notified by email when a windows scheduled task fails / succeeds. Please let me know either using a 3rd party software or scripts / batch files. Tag: defrag for users Tag: 109894
  - 20
    - Windows Server 2003 DNS Server question We have a DNS Server running that is getting errors in the event log about being unable to connect to a domain controller. The thing is, we don't have a PDC, yet the server is set to join a domain. Does a DNS Server running Windows Server 2003 need to be a member of a domain, or can it be just in a workgroup? I checked the Configure Your Server log, and it was initially setup as a Domain Controller with Active Directory, but those were later removed along with the DNS server. The DNS server was immediately reinstalled, of course. Based on this information, I'm pretty sure it can be safely removed from the non-existent domain, but I would like to wait for confirmation. Tag: defrag for users Tag: 109885
  - 21
    - Why do clents and my new E2k3 server that exists in the root forest I have a root domain 'parent.com'. I have a child domain 'child.parent.com'. Lately I've been noticing on my router syslogs that some of my XP clients on parent.com have been hitting the child ADC over tcp 389 and 88. Also, a new E2k3 server I built on parent.com last week is hitting/receiving traffic over tcp 3268 & 389 to/from the child ADC. Shouldn't this traffic be directed to the parent.com ADC/GC? I've also noticed that the E2k3 server is sending Echo requests to the child ADC about every 10 mins. I've checked my 2 parent ADC's and they are both GC's. Any help would be appreciated. Tag: defrag for users Tag: 109882
  - 22
    - Moving a Terminal Server Licensing Server Hi all. Looking for a quick answer: I have a client with a Terminal Server with TS licensing installed on the TS itself. Because the TS is malfunctioning, we are replacing it, but before doing so we need to install TS Licensing on the domain controller and migrate the licenses. Can anyone tell me the easiest way to do this so as to ensure we don't lose the previously activated licenses? Thanks in advance! Jamie Tag: defrag for users Tag: 109881
  - 23
    - Windows 2003 Backup Question This is a multi-part message in MIME format. ------=_NextPart_000_0217_01C88FEB.6DCD3270 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable This may be a simple question.... I have a Windows 2003 SP2 machine, and I had a question about backup. When I do a scheduled backup every night, it gives me a file say = backup1.bkf. The first night it works fine. But, on the second night, it also again backup up to backup1.bkf and = just adds to that file. What I would like to have happen is night1 backup to backup1.bkf, then = make a new file say backup2.bkf, the next night backup3.bkf.=20 Is there any way to do this? I tried Append or replace backup selection, = but it always saves to the same file. The only way I have found is to = rename the file manually everynight. thanks! ------=_NextPart_000_0217_01C88FEB.6DCD3270 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Diso-8859-1"> <META content=3D"MSHTML 6.00.6000.16608" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=3D#ffffff> <DIV><FONT face=3DArial size=3D2>This may be a simple = question....</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>I have a Windows 2003 SP2 machine, and = I had a=20 question about backup.</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>When I do a scheduled backup every = night, it gives=20 me a file say backup1.bkf. The first night it works fine.</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>But, on the second night, it also again = backup up=20 to backup1.bkf and just adds to that file.</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>What I would like to have happen is = night1 backup=20 to backup1.bkf, then make a new file say backup2.bkf, the next night=20 backup3.bkf. </FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>Is there any way to do this? I tried = Append or=20 replace backup selection, but it always saves to the same file. The only = way I=20 have found is to rename the file manually everynight.</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>thanks!</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV> </DIV></BODY></HTML> ------=_NextPart_000_0217_01C88FEB.6DCD3270-- Tag: defrag for users Tag: 109878
  - 24
    - Help needed, our windows 2003 server is crashing! Hi, our production server, Windows 2003 Server (x64), has become unstable for some reason. I have no clue how to retrieve any more information about why it is crashing except from the event log.. could anyone please help me? -- The reason supplied by user blabla\Oscar for the last unexpected shutdown of this computer is: System Failure: Stop error Reason Code: 0x805000f Bug ID: 3 Bugcheck String: 0x0000001e (0xffffffffc0000005, 0xfffff800012c121f, 0x0000000000000000, 0xffffffffffffffff) Comment: 0x0000001e (0xffffffffc0000005, 0xfffff800012c121f, 0x0000000000000000, 0xffffffffffffffff) --- The computer has rebooted from a bugcheck. The bugcheck was: 0x0000001e (0xffffffffc0000005, 0xfffff800012c121f, 0x0000000000000000, 0xffffffffffffffff). A dump was saved in: C:\WINDOWS\MEMORY.DMP. -- I can also see some frequent "System errors" in the event log. Error code 000000000000001e, parameter1 ffffffffc0000005, parameter2 fffff800012c121f, parameter3 0000000000000000, parameter4 ffffffffffffffff. How do I proceed? best regards, oscar Tag: defrag for users Tag: 109877
  - 25
    - Windows 2008 & Win XP Client blues - Network name cannot be found Hi, everyone! I've just installed Windows 2008 Enterprise in a Virtual PC 2007 virtual machine. The server is set up as a PDC with it's own domain forrest, and has a DNS server. DNS resolves Ok, but I have 2 major issues. 1) If connecting to/from WinXP / Windows 2003 computer, the network share is visible, but I cannot copy files. The operation fails after a few seconds, with the "Network name cannot be found" (or "is not available") error. This works OK, if the client is Vista, so I presume it's a SMB 2.0 issue. Any hints on how to force the w2k8 box to use SMB 1.0? 2) From the w2k8 box, I cannot browse to www.microsoft.com, www.mozilla.com, and a few other international sites. DNS resolution works fine (ping is ok), website is found, but I get stuck on the "waiting for response". Local (in my country) sites work fine; everything works fine from other computers in my main domain. Help would be appreciated. Regards, Sigmund Jakhel Integrum IT, Slovenia, Europe Tag: defrag for users Tag: 109872
- Next
  - 1
    - New SBS 2003 R2 server does not respond to ping I have just added a new SBS 2003 premium server to my exisiting 2003 server and have assigned the new server the DC role. Eveything seemed to be ok apart from GPO that doesn't work the old server and the clients are all expecting it to come from the old DC, so I ran dcdiag and it reported that the new SBS DC does not respond to ping and gave Win32 error 11010. I have checked and I cannot ping from the command line on any client. Everything else works fine on the new DC all help appreciated. Regards PJ Tag: defrag for users Tag: 109870
  - 2
    - Excessive entries in Event Viewer! Hi All, Our Windows Server 2003 Enterprise Edition (SP2) logs this message with an interval of several (5-15) minutes: The description for Event ID ( 1 ) in Source ( Heartbeat_Sent ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Heartbeat_Sent. I am not a win admin expert, and (extensive) google research of the above did not turn up much. I was able to get some limited info on the use of AUXSOURCE flag, but no idea what the Heartbeat_Sent source is. Please help. Thanks! Tag: defrag for users Tag: 109866
  - 3
    - Hyper-V, RAAS woes. . . Please help My Hyper-V Guests cannot traverse through NAT to gain internet access. I followed the guide by John Paul Cook linked her http://sqlblog.com/blogs/john_paul_cook/archive/2008/03/23/using-wireless-with-hyper-v.aspx Here are the steps I took. 1. Install Windows 2008 Server 2. Setup static IP on physical network card 3. Deploy Hyper-V roles 4. In Virtual Network Manager created an internal only network 5. Define the newly created internal network with IP: 192.168.1.1 Subnet 255.255.255.0 6. Deploy RRAS 7. Configure NAT 8. Pointed public interface to the physical network card 9. Pointed internet network to the internal network 10.Disable firewall on host in relation to the internal network Guest OS receives DHCP from the RRAS Guest OS is able to ping 192.168.1.1. Guest OS is able to resolve internet DNS name. Guest OS cannot traverse through NAT to the internet. My primary goal is to enable Guest OS(s) ability to reach the internet. But I have no idea whatâ??s wrong with my configurations. Tag: defrag for users Tag: 109864
  - 4
    - NTBackup fails, Insufficient memory available I've got a Windows Server 2003 sp2 DC, patched completely up to date. Over the past few months I've been having an intermittant problem with it failing with the message "Insufficient memory available". It writes an 8017 message into the Event Log. The server only has 512mb, but the only function it servers is backup, and typically the is over 150mb available. I've checked out kb828402. I have a later version of NTBackup, so the hotfix won't install. NTBackup version 5.2.3790.3959, which includes the hooks for backing up Exchange. I've also tried the jsiinc.com tip to deallocate the tape. The job still fails every three or four days. Any ideas? Tag: defrag for users Tag: 109862
  - 5
    - Installing Windows Server 2003 32bits or 64bits Hi to MCP and the Experience Pros out there, my company have just purchase a HP Proliant ML350 Server G4p - quad 3.2Ghz Xeon, 4GB Ram, 2x725Watts power supply, 5X72GB HDD with RAID hardware. I have to install either Windows Server 2003 with 32 bits or 64 bits, i did some research for 32 and 64 bits, i found out that 64bits can fully utilize the physical memory and so on, but overall, i am still blur about it. 1. can any Pros out there give me some advantage and disadvantage of 32bits and 64bits? 2. this Proliant Server have RAID hardware, from what i heard, it says that RAID 5 can auto backup and recreate data files if one of the harddisk break down, can anyone explain to me know how to configure RAID? thanks in Advance! Regards, ViNC3 Server Pros Wannabe -- Message posted via WinServerKB.com http://www.winserverkb.com/Uwe/Forums.aspx/windows-server/200803/1 Tag: defrag for users Tag: 109860
  - 6
    - IP settings disappear This is a multi-part message in MIME format. ------=_NextPart_000_0035_01C88F87.2B23C2E0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Greetings, Freshly deployed server (Win2003-SP2 x64 Std). I'm having an issue where I set static IP settings for a NIC, hit OK and = they are set correctly. Later when I re-open the NIC's properties, the IP settings are all = showing as back to the default DHCP settings. IPConfig, registry and any WMI query or script all show the static IP = information I entered is indeed being used by the NIC. Even after a reboot... static IP is in-use on the NIC, but open the = network properties window of the NIC and it shows all set to DHCP. This post below describes the same issue, however their fix didn't = apply. My path and system variables are correct. http://www.tech-archive.net/Archive/Windows/microsoft.public.windows.serv= er.networking/2008-01/msg00293.html TIA, Kirk Lashbrook ------=_NextPart_000_0035_01C88F87.2B23C2E0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Diso-8859-1"> <META content=3D"MSHTML 6.00.6000.16608" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY> <DIV><FONT face=3DArial></FONT> </DIV> <DIV><FONT face=3DVerdana size=3D2>Greetings,</FONT></DIV> <DIV><FONT face=3DVerdana size=3D2></FONT> </DIV> <DIV><FONT face=3DVerdana size=3D2>Freshly deployed server (Win2003-SP2 = x64=20 Std).</FONT></DIV> <DIV><FONT face=3DVerdana size=3D2></FONT> </DIV> <DIV><FONT face=3DVerdana size=3D2>I'm having an issue where I set = static IP=20 settings for a NIC, hit OK and they are set correctly.</FONT></DIV> <DIV><FONT face=3DVerdana size=3D2>Later when I re-open the NIC's = properties, the IP=20 settings are all showing as back to the default DHCP = settings.</FONT></DIV> <DIV><FONT face=3DVerdana size=3D2></FONT> </DIV> <DIV><FONT face=3DVerdana size=3D2>IPConfig, registry and any WMI = query or=20 script all show the static IP information I entered is indeed being = used by=20 the NIC.</FONT></DIV> <DIV><FONT face=3DVerdana size=3D2></FONT> </DIV> <DIV><FONT face=3DVerdana size=3D2>Even after a reboot... static IP is = in-use on the=20 NIC, but open the network properties window of the NIC and it shows all = set=20 to DHCP.</FONT></DIV> <DIV><FONT face=3DVerdana size=3D2></FONT> </DIV> <DIV><FONT face=3DVerdana size=3D2></FONT> </DIV> <DIV><FONT face=3DVerdana size=3D2></FONT> </DIV> <DIV><FONT face=3DVerdana size=3D2>This post below describes the = same issue,=20 however their fix didn't apply. My path and system variables are=20 correct.</FONT></DIV> <DIV><FONT face=3DVerdana size=3D2></FONT> </DIV> <DIV><FONT face=3DVerdana size=3D2><A=20 href=3D"http://www.tech-archive.net/Archive/Windows/microsoft.public.wind= ows.server.networking/2008-01/msg00293.html">http://www.tech-archive.net/= Archive/Windows/microsoft.public.windows.server.networking/2008-01/msg002= 93.html</A></FONT></DIV> <DIV><FONT face=3DVerdana size=3D2></FONT> </DIV> <DIV><FONT face=3DVerdana size=3D2></FONT> </DIV> <DIV><FONT face=3DVerdana size=3D2>TIA,</FONT></DIV> <DIV><FONT face=3DVerdana size=3D2>Kirk Lashbrook</FONT></DIV> <DIV><FONT face=3DVerdana size=3D2></FONT> </DIV> <DIV><FONT face=3DVerdana size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DVerdana size=3D2></FONT> </DIV> <DIV><FONT face=3DVerdana size=3D2></FONT> </DIV> <DIV><FONT face=3DVerdana size=3D2></FONT> </DIV> <DIV><FONT face=3DVerdana size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV></BODY></HTML> ------=_NextPart_000_0035_01C88F87.2B23C2E0-- Tag: defrag for users Tag: 109857
  - 7
    - PKI - Certificate enrollment using non IE browsers For a Win2K3 based PKI infrastructue, is there a third party add on to support non IE browsers for enrollment. For Example MAC / Safari ? Or can the enrollment pages be modifed which i am guessing is not possible due to the fact they use XEnroll and Active X Controls. Thanks in advance. -- Patilp Tag: defrag for users Tag: 109856
  - 8
    - Ntbackup Failure Hello, I am running a scheduled NT backup nightly job on two data partitions. I am getting a very intermittent error that has become increasingly more apparent. I am backing up to a USB 2.0 external drive on a file share attached to another server on our network. I get this error in the NT backup log: Error: E: is not a valid drive, or you do not have access. Error: An inconsistency was encountered in the requested backup file. Error: F: is not a valid drive, or you do not have access. ---------------------- The operation did not successfully complete. ---------------------- Can someone please advise me what I can do to fix this issue? -- Thank you! Tag: defrag for users Tag: 109855
  - 9
    - Any network performance impact by MSMQ hi all, THank you for your help in advance. I am not familliar with MSMQ. But I just found out there was a MSMQ with AD Integration installed by a third party program product support. In fact, before finding this happen, there have been some strange things happening. Some of the PCs were freezing (or slow) for couple minutes some times a week. Besides, when the only a promary DC rebooted, the client lost the domain connection (but we have a secondary one running), which this never happened before. Any ideas or inputs? Thank you for your help! Tag: defrag for users Tag: 109854
  - 10
    - Windows is running really Slow Need some help. I have a newer computer running windows 2003 stand. ed. with exchange server 2007 and acting as a web server. The computer ran great for 6 months. Did not change anything. Now the computer runs great for about 15 mins to an hour from boot up. Than gets real slow (really Unresponsive) than speeds up for a little than slow, fast, slow. anythoughts on what it could be? if you need more info let me know thanks Todd Tag: defrag for users Tag: 109851
  - 11
    - New upgraded 2003 lost share connection after a while Hi i have recently upgraded my windows 2000 DC to 2003 sp1 STD server (he is my master domain) Now at every 15:00 pm (give or take) all share and printer become unavailable to all my XP sp2 client (all map drive) !! MAP DRIVE DISCONNECTED i can ping the server i can access the server in remote using dameware i CANT do \\ServerName\ it says Network path not found Firewall is not activated when i reboot the server its all ok again until 15:00 pm ... (symantec endpoint is installed on the dc) thanks for your help. Tag: defrag for users Tag: 109847
  - 12
    - IPP vs smb print server Hi, We are thinking using IPP as the primary printing protocol for our print server. Can anyone advice if there is any disadvantage compare with traditional smb printer server, e.g. administration and management? Thanks in advance. Tag: defrag for users Tag: 109846
  - 13
    - multiple servers on one box? Can anyone tell me if it is ok to run Live Communications Server, a web server and SQL 2005 on the same box? TIA, Jim Tag: defrag for users Tag: 109836
  - 14
    - Printer Server and Client Drivers This might be a shot in the dark, but we recently created a new windows print server running on Server 2003 R2, to take over for our aged server 2000 print server. All the queues seem to work and you can print to the printers on the new server just fine. However, we have a very simple script that runs on various machines to add a default printer. This script has always worked just fine with the old server, but when we change the script to point to the new server (just replacing the server name because the print queue names are the same on both) we sometimes (NOTE I said SOMETIMES) get a script error of "The remote procedure call failed". Also, if the script fails, and you run it manually after finishing the logon (the script is a logon script) then it will generally work fine. We went round and round on this and finally ran a packet sniffer on the traffic. One thing we noticed is that one the failed attempts, the client seems to be trying to download a printer driver from the new server. Hard to say from the packet capture if it was successful, but we HAVE determined that even though the new server has a much newer print driver, the clients always use the older driver they apparently downloaded from the old server. We've also received occasional reports of people adding printers from the new server and not getting a driver properly. My questions are this: 1.) Is there anything I need to do to allow the print server to download drivers? Is there anything (permissions etc) that could interfere with that? 2.) If a client has an older driver than the one the server has, will it attempt to download the newer one? If so, how often will it attempt it? Every time it tries to add the printer? Tag: defrag for users Tag: 109835
  - 15
    - Paused NETLOGON Service The Netlogon Service comes up as PAUSED after every reboot, (fyi: Win 2K3 SP2 only domain controller.) Have to manually RESUME service. Any suggestions? Thanks in advanced, -D$ Tag: defrag for users Tag: 109833
  - 16
    - Single Label Domains Options Hello, I have a single label Domain on a windows server 2003 enviroment with exchange, doesnt have a .org or a .com at the end. How am i able to convert it to a .org or a .com. We are having DNS issues and need to fix this issue. The dns issues that we are having are DNS related and microsoft has reported that Single Domain is causing this issue, thanks Tag: defrag for users Tag: 109829
  - 17
    - stripe-unit size for Windows 2008/ Exchange 2007 Hi, On a Windows 2008/Exchange 2007 SP1 Mailbox CCR Cluster ( Local disks with RAID ), what is the best/recomanded configuration for the stripe-unit size. Thanks !!! Tag: defrag for users Tag: 109818
  - 18
    - Server 2003 R2 DC Hi all I have a network with 2 Server 2003 DC, I'd like to use the new fwature of 2003 R2 for publishing printers. My I just expand the forest and domain schema or I need to have an R2 DC? Sergio Tag: defrag for users Tag: 109814
  - 19
    - Add Printer to All Users? Hello, We don't use roaming profiles. We are testing out using a Windows print server, however, we found out that the Windows printers are dependent on the user profile of the logged in person. So the help desk can't install printers logged in as themselves because when the user logs in the printers aren't there. Is there any way to get around this so that printer installs would be workstation associated and not associated with a particular user? We are also concerned about when a user logs into a workstation other then there own they won't have any printers. Could printers be associated somehow to "All Users" or the workstation so that whoever logs in will get the printers? Thanks for any suggestions! Kathy Tag: defrag for users Tag: 109807
  - 20
    - 2003 server in a 2008 environment Is it in any way a problem installing a 2003 server with 2005 sql in a 2008 environment. Regards Chris Tag: defrag for users Tag: 109798
  - 21
    - Windows 2003 reverts to previous password after reboot I have several Windows 2003 x64 machines that are on a workgroup (not a domain). They use file sharing and two mirrored SQL servers between them. Every time these machines reboot, either manually or because of an update, they revert back to their previous administrator passwords. Every one does this consistently. Can someone explain this phenomenon and how to fix it? Thanks, Charles Tag: defrag for users Tag: 109796
  - 22
    - Remote Desktop Disconnected - error in data encryption I am on a Microsoft Windows Vista x86 SP0 system and I just created a Microsoft Standard Server X64 and I am remotely connecting to it. I am getting an error and losing network connection: Remote Desktop Disconnected Because of an error in data encryption, this session will end. Please try connecting to the remote computer again. OK Help. I click OK On Control Panel, System, Remote Settings, System Properties for the Remote tab, I have selected Allow connections from computers running any version of Remote Desktop (less secure), and then I changed it to Allow connections only from computers running Remote Desktop with Network Level Authentication (more secure). I have changed it to NLA and it doesn't matter which one I go to. I am not sure what is happening or why this is happening. I just built these yesterday and I did the updates and they are on the same switch and in the same server room as other systems, and they were Server 2003 Standard x64 systems but I formatted the drives. They only got new software, everything else, hardware, wires, etc. all stayed the same. Tag: defrag for users Tag: 109792
  - 23
    - Administrative shares Hi all. I have a Windows 2000 server standard domain with A.D. Who is allowed to connect and browse the LAN PCs administrative shares (i.e.: \\PC_Name\c$ ) ? Only the users in the local admin group of each client and the Domain Admins ? Thanks, Rosgiof. Tag: defrag for users Tag: 109785
  - 24
    - VMConnect from Windows XP/Vista Hi We installed the latest Windows 2008 Enterprise x64 with Hyper-v role. Everything works fine including connection with vmconnect.exe on that machine. May because of the x64 os the vmconnect.exe ends up with a .NET error when using with windows XP: Faulting application vmconnect.exe, version 6.0.6001.17101, stamp 473fa981, faulting module kernel32.dll, version 5.1.2600.3119, stamp 46239be1, debug? 0, fault address 0x00012a5b. Where to get the vmconnect for x32 os? Or is this another problem? Thanks for help Jan Tag: defrag for users Tag: 109784
  - 25
    - How to reset SDDL values for SCM Hello! I have a by misstake set to low SDDL permissions on the Service Control Manager it self... this is the command i used to set the wrong SDDL (locking my self out...) sc sdset scmanager D:(A;;CCLCRPRC;;;AU) resulting in only read access... the correct command should have been: sc sdset scmanager D:(A;;CCLCRPRC;;;AU)(A;;CCLCRPWPRC;;;SY)(A;;KA;;;BA)S:(AU;FA;KA;;;WD)(AU;OIIOFA;GA;;;WD) Will reset back to RTM values according to this http://support.microsoft.com/kb/907460 1. Where does those SDDL values for the SCM its self get saved? 2. How do I revert to the original values now when only have readaccess fo AU (geting access denied, ehen trying to reset)? Could a reinstall of SP2 correct this problem? Best Regards Anders Tag: defrag for users Tag: 109783

there is a method for enable defrag for domain users?

Re: defrag for users by Lanwench

Lanwench
Fri Mar 28 07:02:13 PDT 2008

Pietro84 <mistake84@gmail.com> wrote:
> there is a method for enable defrag for domain users?

No, they need admin rights. But you really shouldn't want them to do this
anyway - if you need regular defrag, I'm sure there are ways to script it or
otherwise make it run as a scheduled task - using either the built-in defrag
or third party (and better) products like PerfectDisk or Diskkeeper.

Top