Windows 2003 Shutdown

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Error Loading Operating Sytem - Windows 2003- Need to recover AD f I had some partition problem and was able to fix it. I logged into recovery console and did fix mbr and alsot fix boot disk. Now when I go to the install it doens show only the C drive. I still get Error Loading Operating system. If possible, can I get some files off the Windows 2003 server to restore my AD? I can access all the files and copy them off using Windows PE Boot disk Tag: Windows 2003 Shutdown Tag: 112558
  - 2
    - Server 2008 Ent Remote Desktop The computer is a new Dell Server and a fresh install of Server 2008 Enterprise. I have Remote Desktop enabled on the server utilized by the wizard. Windows Firewall is on as is the public and private firewall. This is an edge server so it has one public IP and a private IP. I get the same results coming from both private and public IP. I will use remote desktop to try to connect to the server, and the page will come up telling me incorrect username or password. I know the password and username are correct, but no matter what I type in I continuously get this error while trying to remote into the machine. I have created a new account with remote priveledges and tried that as well and it does not work either. However, when I use either to log in locally, they work fine. This is a fresh install with only the AD, DNS, and a few other services configured but no software other than Server 2008 components. Tag: Windows 2003 Shutdown Tag: 112555
  - 3
    - WMIC question I don't see a specific group for WMIC questions so I'm trying this one.... I'm trying/playing with WMIC for the first time. I want to see a list of installed software on a local computer, and output the list to an html file. In a batch file I have these commands: wmic /node:server01 os assoc /output:c:\test\output.htm /format:htable The batch file runs and the list of installed software scrolls by on the screen but, the batch file ends with 2 error messages, both saying: The filename, directory name, or volume label syntax is incorrect. What is wrong with my syntax? Thanks Tag: Windows 2003 Shutdown Tag: 112554
  - 4
    - where would i find appliction faliures, crashes, etc. in windows 2 I had a problem where everyone was having problems with email, file maker and other services. I was getting different issues and calls from diffrent endusers. What steps should I take first if I am getting calls about multiple services from multiple clients that are all running off the same server? Would it be best to check the server and logs or start from each enduser. I am trying to make a list for my trainee on what steps should be taken in what order if this kind of problem comes up. Tag: Windows 2003 Shutdown Tag: 112553
  - 5
    - Set permissioni for individual services I have a windows 2003 domain member server. I want to give a user the ability to remotely stop and start two services on that server. How do I configure the security on the server services to allow this? Tag: Windows 2003 Shutdown Tag: 112547
  - 6
    - Password protected folders (after domain logon), with RUNAS comman Hello. I've been working on a way to password protect folders, even after the domain logon, with the RUNAS command. What I've done so far: - Created a new user called "permission_folder1" - Created a new folder called "folder1", removed all permissions from it, and added the new user in the permission list. - Created a shortcut, and added the runas command: runas /user:domain\permission_folder1 "explorer.exe \\server1\sharename\folder1" When I try to open the shortcut, it will ask for password (for the permission_folder1 user). If I type wrong password nothing happends, if I type the right password it gives me a weird error, which I could find nothing about on google: RUNAS ERROR: Unable to run - explorer.exe \\server1\sharename\folder1 1385: Logon failure: the user has not been granted the requested logon type at this computer What does this mean? What can I do to fix it, if it's even possible? It all takes place in a Windows enviroment, with a Windows 2003 Small Business Server as DC, Windows Server 2003 as terminal server and Windows XP as clients. The shortcut doesn't work on the terminal server, nor the Windows XP clients. The secondary logon service is running. Might be worth mentioning that I can use: runas /user:domain\permission_folder1 calc Note: All names like server1, sharename, folder1, permission_folder1 etc. are dummynames. Tag: Windows 2003 Shutdown Tag: 112538
  - 7
    - could not browse Root Folder C:\ Dear support, I have a peculiar problem with my C partition on windows 2003 SP2 HP DL380G4 RAID5. Using windows explorer if click on C: drive the system hangs and nothing happens. I can only open particular folders using Run command for eg. typing in the Run window "c:\program files" Any help on this would be appreciated regards shoeb Tag: Windows 2003 Shutdown Tag: 112528
  - 8
    - Default printer Hi, Anyone knows how to find out the default printer in regsitry? Here I have many print queues connected on the computer but wonder how to know by registry which one is the default printer. This is for scripting purpose. Thanks in advance. Pakeon Tag: Windows 2003 Shutdown Tag: 112527
  - 9
    - Intermittent Network Pauses Hi There, We have a HP Class-C Chassis with 4 Blade servers, all running windows server 2003. Two of these servers are clustered in Active Passive mode. This cluster is connected to HP EVA3000 SAN array and the network interface of the cluster connects to Cisco 3750 stack. For the past number of months we have been having issues where the clients, running windows XP lose their network drives and after a pause of approx 10-15 seconds reconnect and in many cases a reboot of the workstation is required. We have performed a number of test to isolate the root casue of the issue. The network was fully checked and ruled out as the casue. Packet capture did not reveal anything unusual, except traffic stopping from the cluster during the pause. We perfomed a number of tests on the cluster nodes and one of the tests was a copy test. We ran perfmon and started copying files between local drives and SAN drives. Test1 :copy a Gigabyte file from Local C: to D: Test2: copy the same file from local C: to SAN Test3: Copy the same file from SAN to local C: During all of the above tests we observed, on perfmon, the CPU utilsation dropping to zero and the the network Interface utilisation dropping to zero at exactly the same time. While the CPU utilisation recovered almost immedailty, the network utilisation stayed at 0% for the duration of the copy. These tests caused exactly the same outages that our users experience. While this was happening I could still ping the server at all time. The servers are running Windows 2003 Server SP2. RSS is disabled on the Nics. TOE is disabled. Teaming is disabled as well. Has anyone seen or had this or similar issues. Please help. Thank you Tag: Windows 2003 Shutdown Tag: 112518
  - 10
    - 2008 Server in server 2003 we could go to Icon in Control panel or Adminstrator tools to add more licences. I have a 2006 and 30 user Cals. Where do I put them in? thanks Fred Tag: Windows 2003 Shutdown Tag: 112517
  - 11
    - NAT Router restricted by RADIUS I'm trying to setup a NAT router that uses RADIUS authentication to determine which packets should be passed from the internal network out to the internet. I have tried to do this with RRAS without luck, I get the feeling the NAT implementation there doesn't any form of authentication. I've also tried using ISA but that requires a special piece of software to be installed on each client. I'm trying to just use the currently-logged-in user's credientials as the authentication token sent to my RADIUS server. Does anyone know of a way to accomplish this? Tag: Windows 2003 Shutdown Tag: 112515
  - 12
    - max number of scheduled task I have a client running windows 2003 r2 sp2 standard edition. They are telling me they are reaching the max limit for this. I have heard there is a regedit to overcome this. Dos anyone know how do this? Tag: Windows 2003 Shutdown Tag: 112514
  - 13
    - moving windows scheduled taks I need to move 1200 scheduled task from one of my windows 2003 servers to another. Is there a way to do this? Also is there way to over come the scheduled task limit. I have been told we are reaching the limit of scheduled tasks. Thanks Tag: Windows 2003 Shutdown Tag: 112513
  - 14
    - SQLsrv.exe takes the CPU 100% Dear all: The process sqlsrv.exe is taking the CPU at 100%. How tools or methods should I use in order to monitor SQL? Thanks in advanced Best regards LIR Tag: Windows 2003 Shutdown Tag: 112509
  - 15
    - Win Installer problem after installing SP2 to Windows Server 2003 I recently updated my server to SP2 from SP1 and now I can not install any programs. Any ideas. Tag: Windows 2003 Shutdown Tag: 112505
  - 16
    - Recommendations for taking an image of a server Hi there, Just wondering if anyone could recommend any software to take images of a couple of servers before i take them to the out of the office. I have 4 servers that i could do with imaging onto a USB hard drive and keep for safe keeping. I do not need to do anything fancy like restore the image over a network. Just need to be able to restore the image from a portable hard disk. Thanks in advance, Cheers John Tag: Windows 2003 Shutdown Tag: 112504
  - 17
    - Offline File Weirdness I've got a user having problems with offline files. His user profile is setup on one of our Windows 2003 SBS boxes, and his laptop is setup to use it offline when he's away from the office. Two files don't seem to get carried over correctly we he sync's at the end of the day, Outlook.NK2 and rasphone.pbk. There will be no errors in the sync, and the offline files folder will show these two files being present. Sure enough though, when he gets home the shortcut to his vpn connection does nothing and Outlook has no autocomplete. Outlook will then create a new autocomplete, which will inturn over write the one stored on the server when he comes back to the office the next day. Also, the rasphone.pbk just disappears and he vpn connection must be recreated. Very frustrating. Any ideas guys and gals? Anthony R. Vallario Tag: Windows 2003 Shutdown Tag: 112503
  - 18
    - W2K server bugcheck error Hi there, I have a bugcheck error on my W2K sp4 print server, what could be the cause? Thank you, T The computer has rebooted from a bugcheck. The bugcheck was: 0x0000007f (0x00000008, 0x00000000, 0x00000000, 0x00000000). Microsoft Windows 2000 [v15.2195]. A dump was saved in: C:\WINNT\Minidump \Mini050508-01.dmp. Tag: Windows 2003 Shutdown Tag: 112501
  - 19
    - server error log Hi there, I have a W2K sp4 server and have some valid remote device writing an event every 6 seconds in the system log. Is there a way to avoid writing that event since I cannot stop the process of remote device accessing my server[some remote firewall trying to check periodically]. Thanks, T Tag: Windows 2003 Shutdown Tag: 112500
  - 20
    - New Server in Company Hello, I am ordering my first new server. I need to get Server 03 due to the application we are planning on running. this is my first server config. Due to the nature of the application, I had to order 8 hard drives. drive 0,1 = raid 1 drive 2, 3 = raid 1 drive 4,5 = raid 1 drive 6,7 = raid 1 Ihave never created a RAID config before. I have a raid card ordered with the server. when and how is the best time to create the raid array and the partitions on the drives? when I connect all 8 drives, will the system ask me if i want to create a raid? Tag: Windows 2003 Shutdown Tag: 112487
  - 21
    - DCOM error I am getting this error on my 2008 server. Its running as a DC and DNS. Our other server is a 2003 server running as DC and DNS. DCOM was unable to communicate with the computer 24.29.1.219 using any of the configured protocols. the ip resolves to my ISP. I don't know why the server is doing this. I don't think it should be trying to communicate with the ips server any way. Does anyone have any suggestions on how to fix this error. Tag: Windows 2003 Shutdown Tag: 112480
  - 22
    - VSS snaps filling my drive Hi, Just got a warning from my monitoring software that my 400GB database drive with around 100GB of Exchange information store is 75% full. I've seen this before, so went looking at the System Volume Information folder (after changing permissions to allow me access to it) to discover that it had accumulated 200GB worth of snapshots over the past 2 months. Every day when Veritas BE 9.1 (yes, we're upgrading this year) kicks in, I get the following message in my app log: Event Type: Information Event Source: MSExchangeIS Event Category: Exchange VSS Writer Event ID: 9604 Date: 5/1/2008 Time: 4:30:37 PM User: N/A Computer: PAGE Description: Exchange VSS Snapshot metadata document has been collected. This is immediately followed by the Event ID 210 indicating that a full backup of the Exchange DB has started. Backups appear to be ok. Each of the files in the Sysvol folder is created at the exact time the backup starts. The only article I see on the Symantec/Veritas site talks about seeing these files pile up if a Shadow Copy Component backup is cancelled (http://seer.support.veritas.com/docs/269989.htm). Mine do not appear to be cancelled, as the VSS components are being successfully backed up according to the backup log. Anyway, the Veritas solution in the article is to stop the Volume Shadow Copy Service on the server. Questions: 1. If I disable the volume shadow copy service, what am I losing? 2. Can I safely disable the old files in the System Volume Information folder? 3. Any other recommendations? Thanks in advance, Phil Exchange 2003 SP2 on W2K3 SP2 being backed up by Veritas BE 9.1 Tag: Windows 2003 Shutdown Tag: 112473
  - 23
    - [WIN 2k3] IPSEC/Net/device problems I was doing some hardware changes with my HP Blade 460c. After that I couldn't get to internet. I noticed that IPSEC and Taskmanager services were down. I pulled the error messages from IPSEC with netsh. I can't get the to see my hard disks from disk management either. It' says that access denied. Could this be somehow related to the Windows 2000 domain that the 2003 computer is part of? Any ideas are welcome. C:\Documents and Settings\Administrator>netsh ipsec static show gpoassignedpolic y ERR IPSec[05066] : No currently assigned Policy C:\Documents and Settings\Administrator>netsh ipsec dynamic show all ERR IPSec[05066] : No currently assigned Policy ERR IPSec[06127] : Mainmode Policies not available. ERR IPSec[06129] : Quickmode Policies not available. ERR IPSec[06130] : Generic Mainmode Filters not available. ERR IPSec[06131] : Specific Mainmode Filters not available. ERR IPSec[06133] : Generic Quickmode Filters not available. ERR IPSec[06134] : Specific Quickmode Filters not available. ERR IPSec[06139] : Specified MainMode Security Associations not available. ERR Win32[01702] : The binding handle is invalid. ERR IPSec[06140] : Specified QuickMode Security Associations not available. ERR Win32[01702] : The binding handle is invalid. IPSec Configuration Parameters ------------------------------ IPSecDiagnostics : 0 IKElogging : 0 StrongCRLCheck : 0 IPSecloginterval : 3600 IPSecexempt : 3 Boot Mode : Permit Boot Mode Exemptions : Protocol Src Port Dst Port Direction --------- --------- --------- --------- UDP 0 68 Inbound IKEStatistics not available. ERR Win32[01702] : The binding handle is invalid. C:\Documents and Settings\Administrator> Tag: Windows 2003 Shutdown Tag: 112471
  - 24
    - website work without www. in front - from inside the network Hi, I am not able to navigate to our website without prefixing www. i.e we would like to be able to type myDomain.com into IE without having to type www.myDomain.com we have checked out DNS - see the screenshot. http://www.box.net/shared/7vrlahow8w Also, already gone to domain in DNS console and right click and create a new host - where the name is black and the IP address is the IP address of the website. So when I do a nslookup from inside the domain I get the domain controllers and IP address of the website. thanks for your help! Tag: Windows 2003 Shutdown Tag: 112470
  - 25
    - Stange share rights problems We got very strange right problems on our server. We have Common shares and we have enabled all rights for everyone on the the share. Than we are giving proper security rights to groups. Managers groups have write and read rights but Staff group have only read rights. When the staff login than can also write to the share. Why? What happen? Marcus Tag: Windows 2003 Shutdown Tag: 112466
- Next
  - 1
    - 1 backup Device or multiple Hey all, I need some *polite* argument points please :) I work at a consulting company who manages networks for their clients. I'm reletively new here but something strikes me as unusual: In many cases, where there are multiple servers, they also use multiple backup devices. For example: FS1 has a backup device AS1 has a backup device TS1 has a backup device The argument they give is that it is more than a single point of failure and if one backup failes or they forget to put in a tape, then chances are that the other ones will pass. Basically they are not relying on 1 tape drive to do it all (lets say use a 400/800 instead of 3 x 200/400 lto drives). To me this does not make sense from a financial point of view and a managment point of view. I want to bring this to the table but need solid arguments....any ideas? Thanks, Al Tag: Windows 2003 Shutdown Tag: 112458
  - 2
    - Login Time & Copy protection Hello, We are using WinXP on our intranet and want to; 1) Implement a copy protection system. The user can not copy any data to a removable media. This musn't interfere with program installing, saving and copying within intranet. *if possible* the user cannot email any data outside the intranet. 2) I want to track the users login & logout time.(or computer started / shut down time). Do I need a third party program, or do I have to use some management tools from windows services? Any lead will be greatly appreciated. Thank you very much in advance. Tag: Windows 2003 Shutdown Tag: 112457
  - 3
    - CHINA WHOLESALE AFFLICTION T-SHIRTS WHOLESALE ED HARDY JEANS ------------ WWW.OVERINSTOCK.NET ----- Discount Coach Sandals, Dior Sandals, Prada Sandals, Chanel Sandals, Versace Sandals, Crocs Sandals, Women's Sandals Men's Slippers From China Affliction T-shirts lacoste T-shirts Polo T-shirts Brand ShirtsGGG T- shirts Designer T-Shirts Helen Coat burberry coat Cheap Jacket Juicy Couture bbc hoodies bape hoodies Cheap Designer Hoodies NFL NHL NBA MLB Jersey Tag: Windows 2003 Shutdown Tag: 112456
  - 4
    - Dhcp-Ads-Vmst Hi, I'm trying to PXE-boot a machine (W3k) I need to migrate to a virtual server. I have 1 DHCP server which provides the 60 and 67 options: - 60 = "PXEClient" - 67 = IP Adress of server where ADS is installed and configured The PXE-boot fails with error E-51, which means that the client cannot find any Dhcp server ... Can someone help me with resolving this problem ? -- Coigné Guillaume MCP MCSA Messaging www.cafe.be info@cafe.be Alle café van België onder één dak Tag: Windows 2003 Shutdown Tag: 112454
  - 5
    - Windows XP Registry Repair The Windows registry on your PC is a set of files which store all the essential settings for hardware, the operating system, the control panel, application software, user preferences and user profiles, and file associations (which programs run which types of files). How is Windows XP registry repair done, and why does the Windows registry ever need to be repaired anyway? At the bottom of this article, there is a link to a resource page which gives access to software tools you can use to repair the registry. Repairing or cleaning the registry can also be done manually, using the program regedit.exe (Registry Editor), which comes with Windows XP, or with reg.exe from the command line. Manual editing is not recommended though, even if you do a backup, because the registry files are absolutely essential for the Windows operating system to run, and it is all too easy to damage them by careless editing. Microsoft Support itself says this - 'Although you can use Registry Editor to inspect and modify the registry, doing so is not recommended, as making incorrect changes can damage your system.'... Registry Repair: http://groups.google.com/group/regrepairsbv Tag: Windows 2003 Shutdown Tag: 112453
  - 6
    - Windows 2003 R2 (primary corporate AD/DC/GC/KCC/DNS/NIS server) taking Our primary Windows 2003 R2 Server takes an extremely long time to . The server will first hang quite a while at the "preparing network connections" prompt, and then again at the "applying computer settings" prompt. It will eventually bring up the login prompt and allow me to log in, but once in, I can see a number of alerts in both the Application and System Event Logs, and additionally I have to manually start the Server for NIS service. One of the first errors I see in the Event Log is this: Event Type: Warning Event Source: LSASRV Event Category: SPNEGO (Negotiator) Event ID: 40960 Date: 5/3/2008 Time: 4:22:11 PM User: N/A Computer: SERVER1 Description: The Security System detected an authentication error for the server LDAP/SERVER1. The failure code from authentication protocol Kerberos was "There are currently no logon servers available to service the logon request. (0xc000005e)". And also this error: Event Type: Warning Event Source: NtFrs Event Category: None Event ID: 13512 Date: 5/3/2008 Time: 4:31:39 PM User: N/A Computer: SERVER1 Description: The File Replication Service has detected an enabled disk write cache on the drive containing the directory c:\windows\ntfrs\jet on the computer SERVER1. The File Replication Service might not recover when power to the drive is interrupted and critical updates are lost. This server also holds all the FSMO roles for my AD 2003 domain. We have a second redundant DC in our domain which provides nearly all the same services as the primary DC, but it doesn't take nearly as long to boot from a cold start as the primary does. Both servers have exactly the same hardware profile, so I'm trying to determine what is causing such a delay in keeping our main DC from completely booting from a cold start. Any ideas? Both servers configured with mirrored boot drives. Should I be disable the disk write cache function on the RAID controller? Tag: Windows 2003 Shutdown Tag: 112451
  - 7
    - directory sort order On my old 'puter the sort order for a directory listing such as A:/ ... w/be as such: t619 t6190 t6191 & so on on the new 'puter or PC, I get: t619 t6190 t695 t6950 t6191 ........ with other numbers/file names in between So, it sorts according to the first letter & the second letter (or in this case number), but then it loses the order. I want (as I had before) all the t619 series listed together & in alpha/numeric order. Old system was Windows98 SE, this new system in XP ... not that I think it should make a difference. Ideas? -- Sandy Tag: Windows 2003 Shutdown Tag: 112442
  - 8
    - Dual Boot I have a Windows XP 64 bit workstation. I want to set it up so that I can dual boot a Windows Server 2003 Standard 64 bit edition (with that being the primary if no selection is made). I have four physical hard drives in the machine. XP is installed on the first one, drive c. I'd like to install Server 2003 on the 4th one (F:) Can anyone give me some pointers on how to do this? I've done some googling, but haven't come up with any good results. Thanks! Tag: Windows 2003 Shutdown Tag: 112437
  - 9
    - why server is restarting? morning when i come to work i find that my server has been restarted This is happenning often. How will I know why the server was restarted and if it was automatically restarted or because of power failure or anyother reason? Tag: Windows 2003 Shutdown Tag: 112432
  - 10
    - ISA Svr and Terminal Server I am looking for some best practices advice please. We currently have to replace our ISA Svr box with new hardware. At the moment this box only does this plus WSUS and virus management. Basically nothing. However the organisation is about to install a TS server to service about 60+ remote users. Originally we were going to place a second box behind the ISA server to do this but wondered if the TS workload could go on the ISA box to save on hardware? So the question is: would it be ok to combine TS and ISA on the same box or should we stick to the original plan of TS behind ISA? What do other people do here? Thanks, Geoff Schaller Software Objectives Tag: Windows 2003 Shutdown Tag: 112431
  - 11
    - Strange performance on Windows 2003 EE SP2 Hi all, I met a strange performance issue on Windows 2003 Enterprise X64 Edition with SP2 / Intel Xeon 3G(4chips * 4cores/chip) . On the server, there is a j2ee containner with some applications. A simple jsp code to query/insert/update some tables after the client clicked the submit. The clients complained that this update is slowly. I did a test on both the server and another pc. The result is very strange: From the server, the code executed costing 400ms, while 5+ seconds from PCs! The execute time is output in the jsp code, such like: System.out.println( new Date().getTime() ); ..... do updates ... System.out.println( new Date().getTime() ); I had done the test on a Windows 2003 EE 32Bit with SP2, the same result. The SNP is disiabled on both boxes. Any ideas? Flybean 2008-05-04 Tag: Windows 2003 Shutdown Tag: 112430
  - 12
    - Trying to Test Windows Server 2008 Terminal Services I'm trying to test the use of Terminal Services on Windows Server 2008 Standard but I can't quite get it to work. I've installed the Terminal Services Role and published my Remote Applications using Office 2007 applications for the test. When I try to access the programs using http://myserver.com/ts using Vista SP 1, I can see the programs on the web page and even open them (e.g. Excel) but I immediately get an error message saying " this feature is not supported", and I can go no further. I should mention that my Vista SP1 is a virtual machine on the same Windows 2008 server, running under hyper-v. I'm too new to virtual machines to know if that's causing my problem. I should also mention I tried to connect to Terminal Services using XP Pro SP2, but had no luck because apparently I don't have the right version of RDC. Any advice would be greatly appreciated. Tag: Windows 2003 Shutdown Tag: 112422
  - 13
    - Recovery Console question Folks: I am making some changes to our SBS 2003 Server this weekend and some questions have arisen that need fast answers... We are working on a server which is a domain controller. (SBS 2003) I am using Acronis True Image for Windows Server and I have a good backup of my Drives... The original Drive Arrays (they were too small so we had to upgrade to larger drives) have all been removed to make room for the new, larger hard disk arrays and the HP SmartController has been reconfigured to support the new RAID 5 configuration with 3 hard drives. So I cannot go back to the original setup. Acronis Tech support said I can restore the data partition by partition, (one at a time) so I can resize the partition on the new drive which is what we want to do. That process is running now and it will take 12 hours to complete. But they also said that I should not write the MBR using their software. They said I should boot to the recovery console and run some commands. They said: "Please boot up from the Windows Bootable CD, then go to the Recovery Console (the first Repair option you come to). From the command prompt please type: FIXMBR C: FIXBOOT C: COPY CDDrive:\I386\NTLDR C:\ COPY CDDrive:\I386\NTDETECT.COM C:\ BOOTCFG /rebuild ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The problem is that when you do this, Windows installation will ask you for the administrators password before you every have a chance to enter the commands. The administrators name was changed for security reasons so the actual login name "Administrator" does not exist. Will I still be able to get into the Recovery Console? If not, what should I do now? Any help would be appreciated. Bikini Browser San Juan Puerto Rico Tag: Windows 2003 Shutdown Tag: 112417
  - 14
    - Server randomly crashing and restarting. Hi everyone, One of our brand new HP Proliant ML350 servers is crashing and restarting randomly. Memory Dump analysis output is below. Any help will be greatly appreciated. Regards, Microsoft (R) Windows Debugger Version 6.8.0004.0 X86 Copyright (c) Microsoft Corporation. All rights reserved. Loading Dump File [D:\Symbols\MEMORY.DMP] Kernel Summary Dump File: Only kernel address space is available Symbol search path is: D:\Symbols Executable search path is: Windows Server 2003 Kernel Version 3790 (Service Pack 2) MP (4 procs) Free x86 compatible Product: Server, suite: TerminalServer SingleUserTS Built by: 3790.srv03_sp2_rtm.070216-1710 Kernel base = 0x80800000 PsLoadedModuleList = 0x808af9c8 Debug session time: Fri May 2 02:37:16.578 2008 (GMT+3) System Uptime: 7 days 0:04:54.644 Loading Kernel Symbol ................................................................................................................ Loading User Symbols Loading unloaded module list ... ******************************************************************************* * * * Bugcheck Analysis * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck 24, {19033d, f78daa38, f78da734, 8089c9d3} Probably caused by : Pool_Corruption ( nt!ExFreePool+f ) Followup: Pool_corruption --------- 1: kd> !analyze - ******************************************************************************* * * * Bugcheck Analysis * * ******************************************************************************* NTFS_FILE_SYSTEM (24) If you see NtfsExceptionFilter on the stack then the 2nd and 3rd parameters are the exception record and context record. Do a .cxr on the 3rd parameter and then kb to obtain a more informative stack trace. Arguments: Arg1: 0019033d Arg2: f78daa38 Arg3: f78da734 Arg4: 8089c9d3 Debugging Details: ------------------ EXCEPTION_RECORD: f78daa38 -- (.exr 0xfffffffff78daa38) ExceptionAddress: 8089c9d3 (nt!ExFreePoolWithTag+0x000006a1) ExceptionCode: c0000005 (Access violation) ExceptionFlags: 00000000 NumberParameters: 2 Parameter[0]: 00000001 Parameter[1]: 00000000 Attempt to write to address 00000000 CONTEXT: f78da734 -- (.cxr 0xfffffffff78da734) eax=eb4b2178 ebx=00000000 ecx=000001ff edx=00000000 esi=eb4b21c0 edi=89fb9090 eip=8089c9d3 esp=f78dab00 ebp=f78dab4c iopl=0 nv up ei ng nz ac pe cy cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010297 nt!ExFreePoolWithTag+0x6a1: 8089c9d3 8913 mov dword ptr [ebx],edx ds:0023:00000000=???????? Resetting default scope PROCESS_NAME: System CURRENT_IRQL: 0 ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at "0x%08lx" referenced memory at "0x%08lx". The memory could not be "%s". WRITE_ADDRESS: 00000000 BUGCHECK_STR: 0x24 DEFAULT_BUCKET_ID: NULL_DEREFERENCE LAST_CONTROL_TRANSFER: from 8089c26e to 8089c9d3 STACK_TEXT: f78dab4c 8089c26e 89fbb150 00000000 f78dab68 nt!ExFreePoolWithTag+0x6a1 f78dab5c f71eb9e8 eb4b21c8 f78dab90 f721ccfd nt!ExFreePool+0xf f78dab68 f721ccfd f72050a0 eb4b21c8 f16d19c0 Ntfs!ExFreeToNPagedLookasideList+0x1e f78dab90 f71e5212 86609bb8 f78dabbc f78dabc6 Ntfs!NtfsDeleteFcb+0x205 f78dabe0 f721a1f9 86609bb8 89535100 eb4b21c8 Ntfs!NtfsTeardownFromLcb+0x1e2 f78dac38 f71e7137 86609bb8 eb4b2290 eb4b2418 Ntfs!NtfsTeardownStructures+0x12c f78dac64 f72270a9 86609bb8 eb4b2290 eb4b2418 Ntfs!NtfsDecrementCloseCounts+0xa9 f78dacec f72211d8 86609bb8 eb4b2290 eb4b21c8 Ntfs!NtfsCommonClose+0x3a1 f78dad80 8082db08 00000000 00000000 89ecd3f0 Ntfs!NtfsFspClose+0xe2 f78dadac 80920833 00000000 00000000 00000000 nt!ExpWorkerThread+0xeb f78daddc 8083fe9f 8082da4b 00000000 00000000 nt!PspSystemThreadStartup+0x2e 00000000 00000000 00000000 00000000 00000000 nt!KiThreadStartup+0x16 FOLLOWUP_IP: nt!ExFreePool+f 8089c26e 5d pop ebp SYMBOL_STACK_INDEX: 1 SYMBOL_NAME: nt!ExFreePool+f FOLLOWUP_NAME: Pool_corruption IMAGE_NAME: Pool_Corruption DEBUG_FLR_IMAGE_TIMESTAMP: 0 MODULE_NAME: Pool_Corruption STACK_COMMAND: .cxr 0xfffffffff78da734 ; kb FAILURE_BUCKET_ID: 0x24_VRF_nt!ExFreePool+f BUCKET_ID: 0x24_VRF_nt!ExFreePool+f Followup: Pool_corruption --------- 1: kd> .exr 0xfffffffff78daa38 ExceptionAddress: 8089c9d3 (nt!ExFreePoolWithTag+0x000006a1) ExceptionCode: c0000005 (Access violation) ExceptionFlags: 00000000 NumberParameters: 2 Parameter[0]: 00000001 Parameter[1]: 00000000 Attempt to write to address 00000000 Tag: Windows 2003 Shutdown Tag: 112412
  - 15
    - No Help and Support Center Ok. I know I'm in the wrong area, but it seems that "Microsoft Support" of any kind has become rather amoebic and spread out over God Knows where, and I've spent the last three hours just trying to find the right area to ask We're running Win 2K3 R2. I've got two identical servers (IBM x3650) running the 64 bit OS. On one of them, the "Help and Support Center" no longer runs, from ANY application, nor via "F1", nor from the Start menu. I've checked the "Data Execution Prevention" settings (which, by the way, won't let me change the 64Bit executables) and I've checked the registry for application file locations. I'm at a complete loss as to what happened. What am I missing??????? Thanks. -Al Tag: Windows 2003 Shutdown Tag: 112401
  - 16
    - System Process in Task Manager is running at 67+ % with Page Fault System Process in Task Manager is running at 67+ % with Page Faults that go up to 500,000,000 . . . then the system automatically restarts. I am only running Backup Exex 11d server. How can I determine why the system process is faulting? Tag: Windows 2003 Shutdown Tag: 112400
  - 17
    - different option for setting TS permission? 1. using ADUC on a server (domain controller or standalone server), go to user object properties, under Terminal Service Profile, there is a option as "Deny this user permissions to log on to any Terminal Server". The ADUC version is 5.2.3790.1830 2. using ADUC on a XP (installed as admin package for XP) the option change to "allow logon to terminal server". The version of ADUC is 5.2.3790.0. Why they are different? Is there a way to make it the same, especially on XP? a new adminpak? I know the dial-in Tab on xp has to be enabled through some special process. But just realized the difference with the TS option. Any idea why it's like that (other than it's from adminpak) and possible fixt? Thanks. Tag: Windows 2003 Shutdown Tag: 112390
  - 18
    - SFU Is there a way to connect to an ldap server from client services for unix user name mapping on server 2000. I read that 2003 supports this but was wondering if anyone has found a workaround. Tag: Windows 2003 Shutdown Tag: 112389
  - 19
    - Problem with SNMP Hello, We are trying to monitor whether or not processes are running on the windows 2003 servers that we have. I currently have an odd problem. When I do an snmpwalk (from a unix server running nagios) of the hrSWRunName OID, it is supposed to show me ALL of the running processes but it only shows about 12-15 of them and just like murphy's law, it doesnt show the processes that I need to monitor! Any suggestions? thanks Tag: Windows 2003 Shutdown Tag: 112381
  - 20
    - Data Execution Prevention On a W2003 server, I am getting a message from DEP and the program it is complaining about is "MS System Monitor". When I look at the DEP settings, the check box for "Turn on for all programs and services except those I select: " is checked. In the box below, there are 2 programs listed -- MS System Monitor and Winmgr.exebut neither of their boxes are cjecked. What does this mean ? Tag: Windows 2003 Shutdown Tag: 112377
  - 21
    - Cannot rdp into Domain controllers I had a 2003 domain with a 2003 & 2000 domain controller. I ran dcpromo on the 2000 box and demoted it to a member server. I then ran adprep /forestprep on the 2003 domain controller and then I ran dcpromo on a Windows 2003 R2 box and made it a domain controller. I can no longer rdp into either domain controller with domain administrator credentials. I see a security event 534 when I try and I also get this message interactively: "To log on to this remote computer, you must be granted the Allow log on through Terminal Services right. By default, members of the Remote Desktop Users group have this right. If you are not a member of the Remote Desktop Users group or another group that has this right, or if the Remote Desktop User group does not have this right you must be granted this right manually." -- Mike Bannister Tag: Windows 2003 Shutdown Tag: 112366
  - 22
    - .MSI I am trying to create (which I have done) a GPO to push .Net 2.0 Framework to 24 computers. I have converted the .exe to .msi with freeware (Advcance Installer 6.2), created the GPO and pused it out. Computers see it, shows window after applying security settings and before you login, but my problem is that .Net 2.0 Framework requires user interaction to finish and runs in to the ULLA acceptance. Therefore it may get pushed but not installed How can this be accpomplished, to automate an installation that requires you to choose options? Thanks to those that respond. Tag: Windows 2003 Shutdown Tag: 112364
  - 23
    - Test for a particular open file? Hi, I would like to be able to find out if a particluar file on a Windows 2003 server is open (and if possible who has it open). Is there a way to do that programmatically? Thanks -- Tag: Windows 2003 Shutdown Tag: 112360
  - 24
    - Exchange Server C Drive out of SPACE!! We are currently running Exchange 2003 on a server with mirrored 18GB SCSI hard drives. As you probably guessed, the drives are filling up with the logs as the Database is stored on the D drive. Is there a way to break the mirror on the Boot drive, insert a bigger hard drive and remirror on a bigger drive and not lose any of our data or have to reinstall?? Any help would be greatly appreciated! -- jasongrubbs ------------------------------------------------------------------------ jasongrubbs's Profile: http://forums.techarena.in/member.php?userid=47991 View this thread: http://forums.techarena.in/showthread.php?t=960657 http://forums.techarena.in Tag: Windows 2003 Shutdown Tag: 112355
  - 25
    - 2 SBS2003 SERVERS IN ONE LOCATION Hi all, can anyone help or point me to some reference material about having 2 small business servers in one office controlling 2 domains although they are both running with no conflicts I cannot get one to access the internet or ping form any workstation in the building. Thanks in advance. Regards Simon web: www.worldtransfer.co.uk Tag: Windows 2003 Shutdown Tag: 112349

When you shudown Windows 2003 and you put in the reason that you are shuting
down or restarting the server, where is that recorded?

Top

Re: Windows 2003 Shutdown by JohnB

JohnB
Tue May 06 10:14:58 PDT 2008

In the System Event Logs. In the column titled "Source" look for a User32
event.

"klafert" <klafert@discussions.microsoft.com> wrote in message
news:2C069E47-7299-4939-8377-F1DA125C200F@microsoft.com...
> When you shudown Windows 2003 and you put in the reason that you are
> shuting
> down or restarting the server, where is that recorded?

Top