Windows 2003 Domain, domain computers clocks off by an hour

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Move Roaming profiles All, What is the easiest way to change the roaming profile path for a large number of users in one go? We need to perform a upgrade on the server that currently hosts the roaming profile and need to change the path on approx 300 users. Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109897
  - 2
    - Scheduled Task Email Alert Is there any way to get notified by email when a windows scheduled task fails / succeeds. Please let me know either using a 3rd party software or scripts / batch files. Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109894
  - 3
    - Windows Server 2003 DNS Server question We have a DNS Server running that is getting errors in the event log about being unable to connect to a domain controller. The thing is, we don't have a PDC, yet the server is set to join a domain. Does a DNS Server running Windows Server 2003 need to be a member of a domain, or can it be just in a workgroup? I checked the Configure Your Server log, and it was initially setup as a Domain Controller with Active Directory, but those were later removed along with the DNS server. The DNS server was immediately reinstalled, of course. Based on this information, I'm pretty sure it can be safely removed from the non-existent domain, but I would like to wait for confirmation. Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109885
  - 4
    - Why do clents and my new E2k3 server that exists in the root forest I have a root domain 'parent.com'. I have a child domain 'child.parent.com'. Lately I've been noticing on my router syslogs that some of my XP clients on parent.com have been hitting the child ADC over tcp 389 and 88. Also, a new E2k3 server I built on parent.com last week is hitting/receiving traffic over tcp 3268 & 389 to/from the child ADC. Shouldn't this traffic be directed to the parent.com ADC/GC? I've also noticed that the E2k3 server is sending Echo requests to the child ADC about every 10 mins. I've checked my 2 parent ADC's and they are both GC's. Any help would be appreciated. Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109882
  - 5
    - Moving a Terminal Server Licensing Server Hi all. Looking for a quick answer: I have a client with a Terminal Server with TS licensing installed on the TS itself. Because the TS is malfunctioning, we are replacing it, but before doing so we need to install TS Licensing on the domain controller and migrate the licenses. Can anyone tell me the easiest way to do this so as to ensure we don't lose the previously activated licenses? Thanks in advance! Jamie Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109881
  - 6
    - Windows 2003 Backup Question This is a multi-part message in MIME format. ------=_NextPart_000_0217_01C88FEB.6DCD3270 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable This may be a simple question.... I have a Windows 2003 SP2 machine, and I had a question about backup. When I do a scheduled backup every night, it gives me a file say = backup1.bkf. The first night it works fine. But, on the second night, it also again backup up to backup1.bkf and = just adds to that file. What I would like to have happen is night1 backup to backup1.bkf, then = make a new file say backup2.bkf, the next night backup3.bkf.=20 Is there any way to do this? I tried Append or replace backup selection, = but it always saves to the same file. The only way I have found is to = rename the file manually everynight. thanks! ------=_NextPart_000_0217_01C88FEB.6DCD3270 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Diso-8859-1"> <META content=3D"MSHTML 6.00.6000.16608" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=3D#ffffff> <DIV><FONT face=3DArial size=3D2>This may be a simple = question....</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>I have a Windows 2003 SP2 machine, and = I had a=20 question about backup.</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>When I do a scheduled backup every = night, it gives=20 me a file say backup1.bkf. The first night it works fine.</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>But, on the second night, it also again = backup up=20 to backup1.bkf and just adds to that file.</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>What I would like to have happen is = night1 backup=20 to backup1.bkf, then make a new file say backup2.bkf, the next night=20 backup3.bkf. </FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>Is there any way to do this? I tried = Append or=20 replace backup selection, but it always saves to the same file. The only = way I=20 have found is to rename the file manually everynight.</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>thanks!</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV> </DIV></BODY></HTML> ------=_NextPart_000_0217_01C88FEB.6DCD3270-- Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109878
  - 7
    - Help needed, our windows 2003 server is crashing! Hi, our production server, Windows 2003 Server (x64), has become unstable for some reason. I have no clue how to retrieve any more information about why it is crashing except from the event log.. could anyone please help me? -- The reason supplied by user blabla\Oscar for the last unexpected shutdown of this computer is: System Failure: Stop error Reason Code: 0x805000f Bug ID: 3 Bugcheck String: 0x0000001e (0xffffffffc0000005, 0xfffff800012c121f, 0x0000000000000000, 0xffffffffffffffff) Comment: 0x0000001e (0xffffffffc0000005, 0xfffff800012c121f, 0x0000000000000000, 0xffffffffffffffff) --- The computer has rebooted from a bugcheck. The bugcheck was: 0x0000001e (0xffffffffc0000005, 0xfffff800012c121f, 0x0000000000000000, 0xffffffffffffffff). A dump was saved in: C:\WINDOWS\MEMORY.DMP. -- I can also see some frequent "System errors" in the event log. Error code 000000000000001e, parameter1 ffffffffc0000005, parameter2 fffff800012c121f, parameter3 0000000000000000, parameter4 ffffffffffffffff. How do I proceed? best regards, oscar Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109877
  - 8
    - Windows 2008 & Win XP Client blues - Network name cannot be found Hi, everyone! I've just installed Windows 2008 Enterprise in a Virtual PC 2007 virtual machine. The server is set up as a PDC with it's own domain forrest, and has a DNS server. DNS resolves Ok, but I have 2 major issues. 1) If connecting to/from WinXP / Windows 2003 computer, the network share is visible, but I cannot copy files. The operation fails after a few seconds, with the "Network name cannot be found" (or "is not available") error. This works OK, if the client is Vista, so I presume it's a SMB 2.0 issue. Any hints on how to force the w2k8 box to use SMB 1.0? 2) From the w2k8 box, I cannot browse to www.microsoft.com, www.mozilla.com, and a few other international sites. DNS resolution works fine (ping is ok), website is found, but I get stuck on the "waiting for response". Local (in my country) sites work fine; everything works fine from other computers in my main domain. Help would be appreciated. Regards, Sigmund Jakhel Integrum IT, Slovenia, Europe Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109872
  - 9
    - New SBS 2003 R2 server does not respond to ping I have just added a new SBS 2003 premium server to my exisiting 2003 server and have assigned the new server the DC role. Eveything seemed to be ok apart from GPO that doesn't work the old server and the clients are all expecting it to come from the old DC, so I ran dcdiag and it reported that the new SBS DC does not respond to ping and gave Win32 error 11010. I have checked and I cannot ping from the command line on any client. Everything else works fine on the new DC all help appreciated. Regards PJ Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109870
  - 10
    - Excessive entries in Event Viewer! Hi All, Our Windows Server 2003 Enterprise Edition (SP2) logs this message with an interval of several (5-15) minutes: The description for Event ID ( 1 ) in Source ( Heartbeat_Sent ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Heartbeat_Sent. I am not a win admin expert, and (extensive) google research of the above did not turn up much. I was able to get some limited info on the use of AUXSOURCE flag, but no idea what the Heartbeat_Sent source is. Please help. Thanks! Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109866
  - 11
    - Hyper-V, RAAS woes. . . Please help My Hyper-V Guests cannot traverse through NAT to gain internet access. I followed the guide by John Paul Cook linked her http://sqlblog.com/blogs/john_paul_cook/archive/2008/03/23/using-wireless-with-hyper-v.aspx Here are the steps I took. 1. Install Windows 2008 Server 2. Setup static IP on physical network card 3. Deploy Hyper-V roles 4. In Virtual Network Manager created an internal only network 5. Define the newly created internal network with IP: 192.168.1.1 Subnet 255.255.255.0 6. Deploy RRAS 7. Configure NAT 8. Pointed public interface to the physical network card 9. Pointed internet network to the internal network 10.Disable firewall on host in relation to the internal network Guest OS receives DHCP from the RRAS Guest OS is able to ping 192.168.1.1. Guest OS is able to resolve internet DNS name. Guest OS cannot traverse through NAT to the internet. My primary goal is to enable Guest OS(s) ability to reach the internet. But I have no idea whatâ??s wrong with my configurations. Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109864
  - 12
    - NTBackup fails, Insufficient memory available I've got a Windows Server 2003 sp2 DC, patched completely up to date. Over the past few months I've been having an intermittant problem with it failing with the message "Insufficient memory available". It writes an 8017 message into the Event Log. The server only has 512mb, but the only function it servers is backup, and typically the is over 150mb available. I've checked out kb828402. I have a later version of NTBackup, so the hotfix won't install. NTBackup version 5.2.3790.3959, which includes the hooks for backing up Exchange. I've also tried the jsiinc.com tip to deallocate the tape. The job still fails every three or four days. Any ideas? Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109862
  - 13
    - Installing Windows Server 2003 32bits or 64bits Hi to MCP and the Experience Pros out there, my company have just purchase a HP Proliant ML350 Server G4p - quad 3.2Ghz Xeon, 4GB Ram, 2x725Watts power supply, 5X72GB HDD with RAID hardware. I have to install either Windows Server 2003 with 32 bits or 64 bits, i did some research for 32 and 64 bits, i found out that 64bits can fully utilize the physical memory and so on, but overall, i am still blur about it. 1. can any Pros out there give me some advantage and disadvantage of 32bits and 64bits? 2. this Proliant Server have RAID hardware, from what i heard, it says that RAID 5 can auto backup and recreate data files if one of the harddisk break down, can anyone explain to me know how to configure RAID? thanks in Advance! Regards, ViNC3 Server Pros Wannabe -- Message posted via WinServerKB.com http://www.winserverkb.com/Uwe/Forums.aspx/windows-server/200803/1 Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109860
  - 14
    - IP settings disappear This is a multi-part message in MIME format. ------=_NextPart_000_0035_01C88F87.2B23C2E0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Greetings, Freshly deployed server (Win2003-SP2 x64 Std). I'm having an issue where I set static IP settings for a NIC, hit OK and = they are set correctly. Later when I re-open the NIC's properties, the IP settings are all = showing as back to the default DHCP settings. IPConfig, registry and any WMI query or script all show the static IP = information I entered is indeed being used by the NIC. Even after a reboot... static IP is in-use on the NIC, but open the = network properties window of the NIC and it shows all set to DHCP. This post below describes the same issue, however their fix didn't = apply. My path and system variables are correct. http://www.tech-archive.net/Archive/Windows/microsoft.public.windows.serv= er.networking/2008-01/msg00293.html TIA, Kirk Lashbrook ------=_NextPart_000_0035_01C88F87.2B23C2E0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Diso-8859-1"> <META content=3D"MSHTML 6.00.6000.16608" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY> <DIV><FONT face=3DArial></FONT> </DIV> <DIV><FONT face=3DVerdana size=3D2>Greetings,</FONT></DIV> <DIV><FONT face=3DVerdana size=3D2></FONT> </DIV> <DIV><FONT face=3DVerdana size=3D2>Freshly deployed server (Win2003-SP2 = x64=20 Std).</FONT></DIV> <DIV><FONT face=3DVerdana size=3D2></FONT> </DIV> <DIV><FONT face=3DVerdana size=3D2>I'm having an issue where I set = static IP=20 settings for a NIC, hit OK and they are set correctly.</FONT></DIV> <DIV><FONT face=3DVerdana size=3D2>Later when I re-open the NIC's = properties, the IP=20 settings are all showing as back to the default DHCP = settings.</FONT></DIV> <DIV><FONT face=3DVerdana size=3D2></FONT> </DIV> <DIV><FONT face=3DVerdana size=3D2>IPConfig, registry and any WMI = query or=20 script all show the static IP information I entered is indeed being = used by=20 the NIC.</FONT></DIV> <DIV><FONT face=3DVerdana size=3D2></FONT> </DIV> <DIV><FONT face=3DVerdana size=3D2>Even after a reboot... static IP is = in-use on the=20 NIC, but open the network properties window of the NIC and it shows all = set=20 to DHCP.</FONT></DIV> <DIV><FONT face=3DVerdana size=3D2></FONT> </DIV> <DIV><FONT face=3DVerdana size=3D2></FONT> </DIV> <DIV><FONT face=3DVerdana size=3D2></FONT> </DIV> <DIV><FONT face=3DVerdana size=3D2>This post below describes the = same issue,=20 however their fix didn't apply. My path and system variables are=20 correct.</FONT></DIV> <DIV><FONT face=3DVerdana size=3D2></FONT> </DIV> <DIV><FONT face=3DVerdana size=3D2><A=20 href=3D"http://www.tech-archive.net/Archive/Windows/microsoft.public.wind= ows.server.networking/2008-01/msg00293.html">http://www.tech-archive.net/= Archive/Windows/microsoft.public.windows.server.networking/2008-01/msg002= 93.html</A></FONT></DIV> <DIV><FONT face=3DVerdana size=3D2></FONT> </DIV> <DIV><FONT face=3DVerdana size=3D2></FONT> </DIV> <DIV><FONT face=3DVerdana size=3D2>TIA,</FONT></DIV> <DIV><FONT face=3DVerdana size=3D2>Kirk Lashbrook</FONT></DIV> <DIV><FONT face=3DVerdana size=3D2></FONT> </DIV> <DIV><FONT face=3DVerdana size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DVerdana size=3D2></FONT> </DIV> <DIV><FONT face=3DVerdana size=3D2></FONT> </DIV> <DIV><FONT face=3DVerdana size=3D2></FONT> </DIV> <DIV><FONT face=3DVerdana size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV></BODY></HTML> ------=_NextPart_000_0035_01C88F87.2B23C2E0-- Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109857
  - 15
    - PKI - Certificate enrollment using non IE browsers For a Win2K3 based PKI infrastructue, is there a third party add on to support non IE browsers for enrollment. For Example MAC / Safari ? Or can the enrollment pages be modifed which i am guessing is not possible due to the fact they use XEnroll and Active X Controls. Thanks in advance. -- Patilp Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109856
  - 16
    - Ntbackup Failure Hello, I am running a scheduled NT backup nightly job on two data partitions. I am getting a very intermittent error that has become increasingly more apparent. I am backing up to a USB 2.0 external drive on a file share attached to another server on our network. I get this error in the NT backup log: Error: E: is not a valid drive, or you do not have access. Error: An inconsistency was encountered in the requested backup file. Error: F: is not a valid drive, or you do not have access. ---------------------- The operation did not successfully complete. ---------------------- Can someone please advise me what I can do to fix this issue? -- Thank you! Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109855
  - 17
    - Any network performance impact by MSMQ hi all, THank you for your help in advance. I am not familliar with MSMQ. But I just found out there was a MSMQ with AD Integration installed by a third party program product support. In fact, before finding this happen, there have been some strange things happening. Some of the PCs were freezing (or slow) for couple minutes some times a week. Besides, when the only a promary DC rebooted, the client lost the domain connection (but we have a secondary one running), which this never happened before. Any ideas or inputs? Thank you for your help! Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109854
  - 18
    - Windows is running really Slow Need some help. I have a newer computer running windows 2003 stand. ed. with exchange server 2007 and acting as a web server. The computer ran great for 6 months. Did not change anything. Now the computer runs great for about 15 mins to an hour from boot up. Than gets real slow (really Unresponsive) than speeds up for a little than slow, fast, slow. anythoughts on what it could be? if you need more info let me know thanks Todd Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109851
  - 19
    - New upgraded 2003 lost share connection after a while Hi i have recently upgraded my windows 2000 DC to 2003 sp1 STD server (he is my master domain) Now at every 15:00 pm (give or take) all share and printer become unavailable to all my XP sp2 client (all map drive) !! MAP DRIVE DISCONNECTED i can ping the server i can access the server in remote using dameware i CANT do \\ServerName\ it says Network path not found Firewall is not activated when i reboot the server its all ok again until 15:00 pm ... (symantec endpoint is installed on the dc) thanks for your help. Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109847
  - 20
    - IPP vs smb print server Hi, We are thinking using IPP as the primary printing protocol for our print server. Can anyone advice if there is any disadvantage compare with traditional smb printer server, e.g. administration and management? Thanks in advance. Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109846
  - 21
    - multiple servers on one box? Can anyone tell me if it is ok to run Live Communications Server, a web server and SQL 2005 on the same box? TIA, Jim Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109836
  - 22
    - Printer Server and Client Drivers This might be a shot in the dark, but we recently created a new windows print server running on Server 2003 R2, to take over for our aged server 2000 print server. All the queues seem to work and you can print to the printers on the new server just fine. However, we have a very simple script that runs on various machines to add a default printer. This script has always worked just fine with the old server, but when we change the script to point to the new server (just replacing the server name because the print queue names are the same on both) we sometimes (NOTE I said SOMETIMES) get a script error of "The remote procedure call failed". Also, if the script fails, and you run it manually after finishing the logon (the script is a logon script) then it will generally work fine. We went round and round on this and finally ran a packet sniffer on the traffic. One thing we noticed is that one the failed attempts, the client seems to be trying to download a printer driver from the new server. Hard to say from the packet capture if it was successful, but we HAVE determined that even though the new server has a much newer print driver, the clients always use the older driver they apparently downloaded from the old server. We've also received occasional reports of people adding printers from the new server and not getting a driver properly. My questions are this: 1.) Is there anything I need to do to allow the print server to download drivers? Is there anything (permissions etc) that could interfere with that? 2.) If a client has an older driver than the one the server has, will it attempt to download the newer one? If so, how often will it attempt it? Every time it tries to add the printer? Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109835
  - 23
    - Paused NETLOGON Service The Netlogon Service comes up as PAUSED after every reboot, (fyi: Win 2K3 SP2 only domain controller.) Have to manually RESUME service. Any suggestions? Thanks in advanced, -D$ Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109833
  - 24
    - Single Label Domains Options Hello, I have a single label Domain on a windows server 2003 enviroment with exchange, doesnt have a .org or a .com at the end. How am i able to convert it to a .org or a .com. We are having DNS issues and need to fix this issue. The dns issues that we are having are DNS related and microsoft has reported that Single Domain is causing this issue, thanks Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109829
  - 25
    - stripe-unit size for Windows 2008/ Exchange 2007 Hi, On a Windows 2008/Exchange 2007 SP1 Mailbox CCR Cluster ( Local disks with RAID ), what is the best/recomanded configuration for the stripe-unit size. Thanks !!! Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109818
- Next
  - 1
    - Server 2003 R2 DC Hi all I have a network with 2 Server 2003 DC, I'd like to use the new fwature of 2003 R2 for publishing printers. My I just expand the forest and domain schema or I need to have an R2 DC? Sergio Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109814
  - 2
    - Add Printer to All Users? Hello, We don't use roaming profiles. We are testing out using a Windows print server, however, we found out that the Windows printers are dependent on the user profile of the logged in person. So the help desk can't install printers logged in as themselves because when the user logs in the printers aren't there. Is there any way to get around this so that printer installs would be workstation associated and not associated with a particular user? We are also concerned about when a user logs into a workstation other then there own they won't have any printers. Could printers be associated somehow to "All Users" or the workstation so that whoever logs in will get the printers? Thanks for any suggestions! Kathy Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109807
  - 3
    - 2003 server in a 2008 environment Is it in any way a problem installing a 2003 server with 2005 sql in a 2008 environment. Regards Chris Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109798
  - 4
    - Windows 2003 reverts to previous password after reboot I have several Windows 2003 x64 machines that are on a workgroup (not a domain). They use file sharing and two mirrored SQL servers between them. Every time these machines reboot, either manually or because of an update, they revert back to their previous administrator passwords. Every one does this consistently. Can someone explain this phenomenon and how to fix it? Thanks, Charles Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109796
  - 5
    - Remote Desktop Disconnected - error in data encryption I am on a Microsoft Windows Vista x86 SP0 system and I just created a Microsoft Standard Server X64 and I am remotely connecting to it. I am getting an error and losing network connection: Remote Desktop Disconnected Because of an error in data encryption, this session will end. Please try connecting to the remote computer again. OK Help. I click OK On Control Panel, System, Remote Settings, System Properties for the Remote tab, I have selected Allow connections from computers running any version of Remote Desktop (less secure), and then I changed it to Allow connections only from computers running Remote Desktop with Network Level Authentication (more secure). I have changed it to NLA and it doesn't matter which one I go to. I am not sure what is happening or why this is happening. I just built these yesterday and I did the updates and they are on the same switch and in the same server room as other systems, and they were Server 2003 Standard x64 systems but I formatted the drives. They only got new software, everything else, hardware, wires, etc. all stayed the same. Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109792
  - 6
    - Administrative shares Hi all. I have a Windows 2000 server standard domain with A.D. Who is allowed to connect and browse the LAN PCs administrative shares (i.e.: \\PC_Name\c$ ) ? Only the users in the local admin group of each client and the Domain Admins ? Thanks, Rosgiof. Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109785
  - 7
    - VMConnect from Windows XP/Vista Hi We installed the latest Windows 2008 Enterprise x64 with Hyper-v role. Everything works fine including connection with vmconnect.exe on that machine. May because of the x64 os the vmconnect.exe ends up with a .NET error when using with windows XP: Faulting application vmconnect.exe, version 6.0.6001.17101, stamp 473fa981, faulting module kernel32.dll, version 5.1.2600.3119, stamp 46239be1, debug? 0, fault address 0x00012a5b. Where to get the vmconnect for x32 os? Or is this another problem? Thanks for help Jan Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109784
  - 8
    - How to reset SDDL values for SCM Hello! I have a by misstake set to low SDDL permissions on the Service Control Manager it self... this is the command i used to set the wrong SDDL (locking my self out...) sc sdset scmanager D:(A;;CCLCRPRC;;;AU) resulting in only read access... the correct command should have been: sc sdset scmanager D:(A;;CCLCRPRC;;;AU)(A;;CCLCRPWPRC;;;SY)(A;;KA;;;BA)S:(AU;FA;KA;;;WD)(AU;OIIOFA;GA;;;WD) Will reset back to RTM values according to this http://support.microsoft.com/kb/907460 1. Where does those SDDL values for the SCM its self get saved? 2. How do I revert to the original values now when only have readaccess fo AU (geting access denied, ehen trying to reset)? Could a reinstall of SP2 correct this problem? Best Regards Anders Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109783
  - 9
    - Server not displaying the correct amount of memory installed Hi, I have installed 2gb of RAM into a HP DL380 G3 server running Windows 2003 standard version, but when I look at the system proerties through control panel it only shows 768mb of memory, I have run the HP Management agent on the server and looked at the config for the DIMM's and it displays all 4 slots have 512md sticks installed. is there a way of getting the OS to display the correct amount of memory installed? Thanks Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109782
  - 10
    - contingency for print server Hi all. I have a windows2003 server acting as a print server which shares out many printers for my domain users to map. However recently there was a motherboard failure and though i have a 4hours response contract for this server, it took a whole day to recover the server. And for the whole day many various department could not print to the respective printers. Hence my question is what kind of contigency you guys have for such print server. Thks in advance. Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109776
  - 11
    - Grab local session through Remote Desktop on Windows Server 2003? I've left some software running on my Windows 2003 Server Std. I'd like to connect to this machine using Remote Desktop and see the progress of these programs. Is it possible to take a session that was started locally and connect to that desktop over the internet or LAN with RDP? Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109775
  - 12
    - Windows Server 2008 GUI Hi, I am now struggling with a number of the great improvements Microsoft did to Server 2008, in particular: - RegEdit don't have "closed" and "open" folders in the left treevew pane anymore. All folders regardless of state are just pale yellowish supposedly beautiful pieces of useless work. If the right pane (values) is selected, one can't tell which folder the values belong to. Is there any way to fix it and may get the old good 2003 icons? - WinMail panels now use 1 pixel wide splitters. To resize a panel, I now have to position the mouse exactly on that 1 pixel line, which is it least 5 times harder than in Server 2003. Have anyone tried to do it via RDP on a Windows Mobile Device? Is there any way to change the thickness of the splitters? Thanks, John Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109771
  - 13
    - IE 7 opens ans closes immediately in Small Business Server 2003 Brand new install, new Dell PE 840 with Windows Small Business Server 2003 SP2, after installing updates, tried to open IE 7, I get a screen flash and then the app closes. It is not listed in running apps, or anywhere else that I can find. Any ideas? Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109765
  - 14
    - Virtual server limitations of Windows Server 2008 Standard x64 I ordered an 8 processor, 32gig RAM server from Dell today and the pre- sales rep told me that Win2K8 x64 Standard was limited to having 4gig of memory per VM with standard and that to go above 4 gig I'd need the Enterprise version of Win2K8. I hadn't heard this before, is he correct? Thanks! Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109764
  - 15
    - Remote Desktop User... Remote Desktop Users group is missing on my server 2003 R2 running SP2... Any ideas on how to add it (shouldn't this group be available by default?) or work around the problem. I want to be able to access my server remotely for maintenance. Thanks, /Adde -- fantamejthisisgoodvarjedag Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109755
  - 16
    - Big problem No More Connections can be made to this remote compute all of a sudden all my user cannot connect to the share on my domain !!!!! this is the error: No More Connections can be made to this remote computer at this time because there are already as many connections as this computer can accept this is my setup windows 2003 sp1 in a domain i dont know what to do !! Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109753
  - 17
    - file copy Hi there, Is there a utility to copy file shares(with all subdirectories and files) between 2 file servers(from an NT4 server to a W2K3 server) and to retain the NTFS permissions? Thanks, T Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109749
  - 18
    - Task Manager Does anyone know of a utility that would allow me to view the task, running processes on all of my servers from my desktop? Kind of like a remote task manager? -- Eric S. Powell Network Administrator Hascal, Sjoholm & Co, P.S. Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109748
  - 19
    - Windows 2003 DHCP Monitoring Previously our company had Novell DHCP services, and this provided us a live monitor of all DHCP Requests, Acknowledgements, Denies, etc. The Windows DHCP server seems to be lacking any kind of monitoring. It does have logs that I can check, but a monitoring tool would be preferred. I'm also looking for some way to search for a specific MAC Address within the system. Is there some suite of tools available for enhancing my Windows DHCP Administration beyond the minimalistic management snapin? Thanks! Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109746
  - 20
    - Printing from a PC outside domain I have a situation where we have 3 production stations that all have their own domains and on each there is a Printer attached to one of the PC's and shared. I have 1 mobile station that has a single PC on it that is used by each of the 3 prodution stations as needed. It is a stand alone workstation not joined to any of the 3 domains but... They occasionally need to print from the mobile station which has no printer of it's own. Is it possible to print from a computer that is not part of a domain to a printer that is part of a domain? If it helps - all 3 of the production stations are clones of each other including IP schemes. The mobile station has a static IP that is within the IP schema for the production stations so TCP/IP communication already works fine. Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109740
  - 21
    - Will Windows Server 2008 Standard x64 support dual quad core CPUs? Just ordering a server from Dell for use with 2008 and Hyper-V and wanted to make sure 2008 Standard x64 would support: - dual quad-core CPU - 32gig memory I tried to locate this info on Microsoft's website but just found general info about 2008, not a concrete breakdown of what each version supports like their 2003 website. Thanks! Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109737
  - 22
    - SysLog Server Could someone please recommend a SysLog Server application? We are in need of capturing logs from Cisco PiX firewall and a few other Windows Hosts for Auditing purposes (no daily monitoring). I understand there are some good freeware Linux based solutions but I am looking for a decent Windows based solution. Even if it is not free (inexpensive is good). Thank you. Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109735
  - 23
    - GPO Software Deployment - DNS Alias We have recently replaced our main file server, migrating all files\software. Currently have 3 GPO's in place that were reponsible for deploying Office, Visio STD and Visio Pro. We should have used DFS, but that is water under the bridge right now. I had thought that a DNS Alias would allow the GPO's to contact the new file server, even though the server name was different...however this does not appear to be the case. I have put the entry in for disabling strict naming, and verified that the server is at least listening for the Alias as well. However the GPO's will not install. Keeps advising that the source location is not available. But when I go to the path via UNC, I can access. Is there anything I can do to resolve?? I don't want to re-create the GPO's and have a couple hundred clients re-install. Server in Question is running 2003 R2 SP2 Enterprise, 64bit edition. Thanks, Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109728
  - 24
    - Do members of the local Administrators group implicitly have these rights? Gurus, Do members of the local Administrators group implicitly have the following rights: Logon as a service Logon as a batch job Act as part of the operating system? -- Spin Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109726
  - 25
    - Server Console login I have a Server 2003 server that is running Exchange 2003. Several times over the past few months it has locked the console login, so I can't get response when using CTRL+ALT+DEL. I can RDP in and all is running fine, but when I try CTRL+ALT+DEL at the console, it won't respond. When I use mstsc /console, it allows me to enter the login information, but then goes to the same blank screen as at the console itself. Since this is on a KVM, I setup USB mouse and keyboard, but CTRL+ALT+DEL still didn't work. The mouse moves around the screen fine. It is running Symantec for Exchange, Symantec (with the proper exceptions), and the Blackberry Enterprise software. If I reboot, it is fine. I've tried stopping and restarting Symantec and other services, but that doesn't seem to help. I checked the memory usage, and it looks like there is plenty free (2GB total/410MB available, 141112 Kernal/105316 paged/35796 nonpaged). The CPU usage is only 2%, and the network utilization is barely moving. I also noticed the Windows Firewall/ICS services was running, although the Firewall in Control Panel was off. I have turned this off, but it didn't help either. It seems like this person is having the same issue: http://www.computing.net/windows2003/wwwboard/forum/7285.html PLEASE HELP. This is driving me crazy (or crazier, depending on who you talk to). THANKS! Tag: Windows 2003 Domain, domain computers clocks off by an hour Tag: 109725

I just upgraded from a windows 2000 domain server, to windows 2003.
The member computers on the domain all run windows 2000. For some
reason all the computers on the domain are exactly one hour slow. When
I run the following command via netlogon

net time \\s3a-56dmz01.s3a-upland.mydomain.com /set /yes

the 2000 computers all sync however they show the time zone as +7 as
opposed to +8. I've gone through and verified everyones time zone and
that of the server.

The windows 2003 domain controller (s3a-56dmz01) is set up to sync
with an external time server as per kb 816042.
Any one have any ideas on this ?

Re: Windows 2003 Domain, domain computers clocks off by an hour by Don

Don
Thu Mar 27 12:50:00 PDT 2008

Do you have the latest service pack and updates on the 2003 DC. Make sure
the DST (daylight saving time) patches are installed..

--
Hope it helps!

dw

----------------------------------------------
Don Wilwol
www.atthedatacenter.com

"Rowan" <yaardone@gmail.com> wrote in message
news:4b9188d3-6ff7-4b22-b4b2-d5cf5df4cd8d@u10g2000prn.googlegroups.com...
>
>
> I just upgraded from a windows 2000 domain server, to windows 2003.
> The member computers on the domain all run windows 2000. For some
> reason all the computers on the domain are exactly one hour slow. When
> I run the following command via netlogon
>
> net time \\s3a-56dmz01.s3a-upland.mydomain.com /set /yes
>
> the 2000 computers all sync however they show the time zone as +7 as
> opposed to +8. I've gone through and verified everyones time zone and
> that of the server.
>
> The windows 2003 domain controller (s3a-56dmz01) is set up to sync
> with an external time server as per kb 816042.
> Any one have any ideas on this ?

Re: Windows 2003 Domain, domain computers clocks off by an hour by Rowan

Rowan
Fri Mar 28 11:29:19 PDT 2008

On Mar 27, 12:50 pm, "Don Wilwol" <donWilwol@(EMAIL)yahoo.com> wrote:
> Do you have the latest service pack and updates on the 2003 DC. Make sure
> the DST (daylight saving time) patches are installed..
>
> --
> Hope it helps!
>
> dw
>
> ----------------------------------------------
> Don Wilwolwww.atthedatacenter.com
>

I tried applying the updates, but both servers responded the update
had already been applied. I'm running service pack2