VMConnect from Windows XP/Vista

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - How to reset SDDL values for SCM Hello! I have a by misstake set to low SDDL permissions on the Service Control Manager it self... this is the command i used to set the wrong SDDL (locking my self out...) sc sdset scmanager D:(A;;CCLCRPRC;;;AU) resulting in only read access... the correct command should have been: sc sdset scmanager D:(A;;CCLCRPRC;;;AU)(A;;CCLCRPWPRC;;;SY)(A;;KA;;;BA)S:(AU;FA;KA;;;WD)(AU;OIIOFA;GA;;;WD) Will reset back to RTM values according to this http://support.microsoft.com/kb/907460 1. Where does those SDDL values for the SCM its self get saved? 2. How do I revert to the original values now when only have readaccess fo AU (geting access denied, ehen trying to reset)? Could a reinstall of SP2 correct this problem? Best Regards Anders Tag: VMConnect from Windows XP/Vista Tag: 109783
  - 2
    - Server not displaying the correct amount of memory installed Hi, I have installed 2gb of RAM into a HP DL380 G3 server running Windows 2003 standard version, but when I look at the system proerties through control panel it only shows 768mb of memory, I have run the HP Management agent on the server and looked at the config for the DIMM's and it displays all 4 slots have 512md sticks installed. is there a way of getting the OS to display the correct amount of memory installed? Thanks Tag: VMConnect from Windows XP/Vista Tag: 109782
  - 3
    - contingency for print server Hi all. I have a windows2003 server acting as a print server which shares out many printers for my domain users to map. However recently there was a motherboard failure and though i have a 4hours response contract for this server, it took a whole day to recover the server. And for the whole day many various department could not print to the respective printers. Hence my question is what kind of contigency you guys have for such print server. Thks in advance. Tag: VMConnect from Windows XP/Vista Tag: 109776
  - 4
    - Grab local session through Remote Desktop on Windows Server 2003? I've left some software running on my Windows 2003 Server Std. I'd like to connect to this machine using Remote Desktop and see the progress of these programs. Is it possible to take a session that was started locally and connect to that desktop over the internet or LAN with RDP? Tag: VMConnect from Windows XP/Vista Tag: 109775
  - 5
    - Windows Server 2008 GUI Hi, I am now struggling with a number of the great improvements Microsoft did to Server 2008, in particular: - RegEdit don't have "closed" and "open" folders in the left treevew pane anymore. All folders regardless of state are just pale yellowish supposedly beautiful pieces of useless work. If the right pane (values) is selected, one can't tell which folder the values belong to. Is there any way to fix it and may get the old good 2003 icons? - WinMail panels now use 1 pixel wide splitters. To resize a panel, I now have to position the mouse exactly on that 1 pixel line, which is it least 5 times harder than in Server 2003. Have anyone tried to do it via RDP on a Windows Mobile Device? Is there any way to change the thickness of the splitters? Thanks, John Tag: VMConnect from Windows XP/Vista Tag: 109771
  - 6
    - IE 7 opens ans closes immediately in Small Business Server 2003 Brand new install, new Dell PE 840 with Windows Small Business Server 2003 SP2, after installing updates, tried to open IE 7, I get a screen flash and then the app closes. It is not listed in running apps, or anywhere else that I can find. Any ideas? Tag: VMConnect from Windows XP/Vista Tag: 109765
  - 7
    - Virtual server limitations of Windows Server 2008 Standard x64 I ordered an 8 processor, 32gig RAM server from Dell today and the pre- sales rep told me that Win2K8 x64 Standard was limited to having 4gig of memory per VM with standard and that to go above 4 gig I'd need the Enterprise version of Win2K8. I hadn't heard this before, is he correct? Thanks! Tag: VMConnect from Windows XP/Vista Tag: 109764
  - 8
    - Remote Desktop User... Remote Desktop Users group is missing on my server 2003 R2 running SP2... Any ideas on how to add it (shouldn't this group be available by default?) or work around the problem. I want to be able to access my server remotely for maintenance. Thanks, /Adde -- fantamejthisisgoodvarjedag Tag: VMConnect from Windows XP/Vista Tag: 109755
  - 9
    - Big problem No More Connections can be made to this remote compute all of a sudden all my user cannot connect to the share on my domain !!!!! this is the error: No More Connections can be made to this remote computer at this time because there are already as many connections as this computer can accept this is my setup windows 2003 sp1 in a domain i dont know what to do !! Tag: VMConnect from Windows XP/Vista Tag: 109753
  - 10
    - file copy Hi there, Is there a utility to copy file shares(with all subdirectories and files) between 2 file servers(from an NT4 server to a W2K3 server) and to retain the NTFS permissions? Thanks, T Tag: VMConnect from Windows XP/Vista Tag: 109749
  - 11
    - Task Manager Does anyone know of a utility that would allow me to view the task, running processes on all of my servers from my desktop? Kind of like a remote task manager? -- Eric S. Powell Network Administrator Hascal, Sjoholm & Co, P.S. Tag: VMConnect from Windows XP/Vista Tag: 109748
  - 12
    - Windows 2003 DHCP Monitoring Previously our company had Novell DHCP services, and this provided us a live monitor of all DHCP Requests, Acknowledgements, Denies, etc. The Windows DHCP server seems to be lacking any kind of monitoring. It does have logs that I can check, but a monitoring tool would be preferred. I'm also looking for some way to search for a specific MAC Address within the system. Is there some suite of tools available for enhancing my Windows DHCP Administration beyond the minimalistic management snapin? Thanks! Tag: VMConnect from Windows XP/Vista Tag: 109746
  - 13
    - Printing from a PC outside domain I have a situation where we have 3 production stations that all have their own domains and on each there is a Printer attached to one of the PC's and shared. I have 1 mobile station that has a single PC on it that is used by each of the 3 prodution stations as needed. It is a stand alone workstation not joined to any of the 3 domains but... They occasionally need to print from the mobile station which has no printer of it's own. Is it possible to print from a computer that is not part of a domain to a printer that is part of a domain? If it helps - all 3 of the production stations are clones of each other including IP schemes. The mobile station has a static IP that is within the IP schema for the production stations so TCP/IP communication already works fine. Tag: VMConnect from Windows XP/Vista Tag: 109740
  - 14
    - Will Windows Server 2008 Standard x64 support dual quad core CPUs? Just ordering a server from Dell for use with 2008 and Hyper-V and wanted to make sure 2008 Standard x64 would support: - dual quad-core CPU - 32gig memory I tried to locate this info on Microsoft's website but just found general info about 2008, not a concrete breakdown of what each version supports like their 2003 website. Thanks! Tag: VMConnect from Windows XP/Vista Tag: 109737
  - 15
    - SysLog Server Could someone please recommend a SysLog Server application? We are in need of capturing logs from Cisco PiX firewall and a few other Windows Hosts for Auditing purposes (no daily monitoring). I understand there are some good freeware Linux based solutions but I am looking for a decent Windows based solution. Even if it is not free (inexpensive is good). Thank you. Tag: VMConnect from Windows XP/Vista Tag: 109735
  - 16
    - GPO Software Deployment - DNS Alias We have recently replaced our main file server, migrating all files\software. Currently have 3 GPO's in place that were reponsible for deploying Office, Visio STD and Visio Pro. We should have used DFS, but that is water under the bridge right now. I had thought that a DNS Alias would allow the GPO's to contact the new file server, even though the server name was different...however this does not appear to be the case. I have put the entry in for disabling strict naming, and verified that the server is at least listening for the Alias as well. However the GPO's will not install. Keeps advising that the source location is not available. But when I go to the path via UNC, I can access. Is there anything I can do to resolve?? I don't want to re-create the GPO's and have a couple hundred clients re-install. Server in Question is running 2003 R2 SP2 Enterprise, 64bit edition. Thanks, Tag: VMConnect from Windows XP/Vista Tag: 109728
  - 17
    - Do members of the local Administrators group implicitly have these rights? Gurus, Do members of the local Administrators group implicitly have the following rights: Logon as a service Logon as a batch job Act as part of the operating system? -- Spin Tag: VMConnect from Windows XP/Vista Tag: 109726
  - 18
    - Server Console login I have a Server 2003 server that is running Exchange 2003. Several times over the past few months it has locked the console login, so I can't get response when using CTRL+ALT+DEL. I can RDP in and all is running fine, but when I try CTRL+ALT+DEL at the console, it won't respond. When I use mstsc /console, it allows me to enter the login information, but then goes to the same blank screen as at the console itself. Since this is on a KVM, I setup USB mouse and keyboard, but CTRL+ALT+DEL still didn't work. The mouse moves around the screen fine. It is running Symantec for Exchange, Symantec (with the proper exceptions), and the Blackberry Enterprise software. If I reboot, it is fine. I've tried stopping and restarting Symantec and other services, but that doesn't seem to help. I checked the memory usage, and it looks like there is plenty free (2GB total/410MB available, 141112 Kernal/105316 paged/35796 nonpaged). The CPU usage is only 2%, and the network utilization is barely moving. I also noticed the Windows Firewall/ICS services was running, although the Firewall in Control Panel was off. I have turned this off, but it didn't help either. It seems like this person is having the same issue: http://www.computing.net/windows2003/wwwboard/forum/7285.html PLEASE HELP. This is driving me crazy (or crazier, depending on who you talk to). THANKS! Tag: VMConnect from Windows XP/Vista Tag: 109725
  - 19
    - Windows 2003 R2 x64 intermittently hangs New Windows 2003 R2 x64 server, Quad core proc, 12gigs ram, dual HBA fiber attached SAN storage. 3 SAN data volumes (2 - data volumes and 1 for user folders, mapped to look like one share). Server will suddenly seem to stop responding, sort of. Very slow browsing of the mapped drive. Server is still responding, and RDP to it, and open both data drives, but cannot open the use folder volume. No errors are generated. Very little to no disk activity in perf mon. There are no errors on the server, and no errors in the SAN storage system (which is also brand new). We have a duplicated system (same server and SAN system) as we were planning for an offsite DR and DFS sharing system, we replicated the data to the other server/SAN, and the same problem occured. Anybody got any ideas????? Tag: VMConnect from Windows XP/Vista Tag: 109724
  - 20
    - Server 2008 x64 And Shadow Copy Backups/DosDev Hi All We're using Server 2008 x64 Standard for running Exchange 2007 and SQL Server 2005 plus a few small COM application objects and a small amount of file serving. When it comes to backup time I have to say I was disappointed with the Server 2008 option of full drive only. Its useful to be able to do that, certainly, but its not the only kind of backup thats useful. So, I decided to go the Robocopy route - an excellent tool for anyone unfamiliar with it. All went fine until I got to the point of wanting to get the Exchange edb files backed up. Some quick reading later and the combination of VShadow and DosDev (create a shadow copy, then mount it as a drive letter) seemed perfect. I got the x64 version of VShadow.exe from the VSS SDK and DosDev from one of the reporting tools. Version number: 5.2.3790.1830 (10/05/2007). The VShadow -Script=vss.cmd D: works fine and as various sites suggest. >DosDev L: %SHADOW_DEVICE_1% Returns: Current definition: L: = \??\GLOBALROOT\Device\HarddiskVolumeShadowCopy193 If I try to change to the drive I get: >L: The device is not ready. Or if I've left it a while (in case it was a timing issue) eventually it comes out with: File not found. Anyone have any thoughts, ideas or alternatives? Thanks! Tag: VMConnect from Windows XP/Vista Tag: 109723
  - 21
    - Automatic remote desktop login Hi, I would like to make my Windows Server 2008 Enterprise create a terminal session when booted up: I've got some daemons that I want to make start at boot, but I need also the GUI available and launching them as jobs doesn't allow me to get to the GUI. These daemons does not allow to interact via a remote administration app. Tag: VMConnect from Windows XP/Vista Tag: 109722
  - 22
    - Can't Install KB931374 and KB943484 I can't install the following two updates on W2K3 and W2K servers. These are not DCs, but vulnerable dlls still exist on them. Anyone have any idea on how to get rid of this vulnerability? KB943484 KB931374 http://www.microsoft.com/technet/security/bulletin/MS08-003.mspx Thanks. Tag: VMConnect from Windows XP/Vista Tag: 109719
  - 23
    - Move 2003 file server to new domain Hi We are in the process of a NT4 to 2003 migration. We are running a NT4 DC on domain X and a 2003 DC on domain Y in mixed mode. All out file servers are already on 2003. All users and groups have been migrated with ADMT from domains X to Y and all workstations have joined the new domain Y. Because of all the SID history being migrated with ADMT, all users on the new domain Y can still access the files and shares on the file servers on old domain X. Now we want to move these 2003 file servers to the new domain Y. How can we do this in way so all file and share permissions will automatically be changed as well? At the moment all shares and files on the servers only list the old domain X users and groups. After moving the server to the new domain Y, we want the new users and groups on domain Y to appear in all the file and share permissions. Thanks Tag: VMConnect from Windows XP/Vista Tag: 109718
  - 24
    - Getting Event ID 333 error messages 60 70 times a minute Hi, I have W2K3 SP2 Standard server running SQL 2000 standard. I was trying to specify a non SA account to run SQL Server Agent jobs but when I entered the username and password of the account I got the following error. An I/O operation initiated by the Registry failed unrecoverably. The Registry could not read in, or write out, or flush, one of the files that contain the system's image of the Registry. The Event ID is 333 On closer examination of the system log I noticed that i was getting this error 60-70 times a minute and had been doing so for several weeks. Can anyone throw any light on this problem? Thanks in advance Tag: VMConnect from Windows XP/Vista Tag: 109713
  - 25
    - Updating applications on Server 2003 I do not have alot of experience with networking but have been asked to manage a Windows Server 2003 network. My problem at the moment is updating some of the server based software such as Adobe Reader Ver 5.0. Wondering what the best way to do this was? Also how to load software applications to the network from the server. Tag: VMConnect from Windows XP/Vista Tag: 109711
- Next
  - 1
    - Network Infrastructure Hi Guys, Hope Im in the right group. Im in a stage of fixing my network. This is my current setup. 1. I have an active directory server, which is mydomain.com, wherein also my DNS and DHCP is located. 2. My subnet is 255.255.255.0 This is my idea. 1. Have these servers: (Need suggestions on these) a. AD Server with DNS Server - is this a good practice? b. DHCP Server with ISA Server - is this a good practice? Other concern: I want my network to have access limitations. Here is a scenario. 1. In our network, only managers can use their laptop to access our network and internet. It can be wired or wireless. Unauthorized laptop should or must not access our network. But from the way the network was setup, they can access it through wire. I can filter the wireless using MAC Address filter from the routers. But if they connect through wire and know how to config TCP/IP they can easily access our network. Can this be avoided through ISA? Is there a way to filter MAC Address through Active Directory? Hope you can help me on this. Thanks in advance. Allan Tag: VMConnect from Windows XP/Vista Tag: 109704
  - 2
    - HP ProLiant Opteron 1210 or Xeon 3040 I'm stuck between buying HP ProLiant ML 115 Opteron 1210 @ 1.8 GHz and HP ProLiant ML 110 G4 Xeon 3040 1.86 GHz. All the rest of the specs are the same. Difference of price is about =A310. But according to HP UK's website Xeon 3040 is discontinued. But my question is which processor is better? I have started MCSE, so I'll be using it for my home lab/server. PS. I've searched through the forum, only bechmark I found was between Xeon 5000 vs Opteron 200 series. Here Xeon out performed but not when it comes to power consumption. Thanks in advance. Tag: VMConnect from Windows XP/Vista Tag: 109694
  - 3
    - Moving CA and Licensing Services Hey Everyone, We have new servers in place. I wish to migrate our CA and Licensing services across then demoting the old services. What is the best way of doing? Regards, Mark Tag: VMConnect from Windows XP/Vista Tag: 109693
  - 4
    - External and internal domains and DNS Server Hi, I have the company.com Internet domain which serves the company's public Internet website at www.company.com. The authoritative name server for this domain is somewhere in the Internet. Now I installed a new domain controller on Windows Server 2008 for a new internal domain which I called company.com as well. I guess it wasn't a wise decision because if I type www.company.com on a machine that belongs to the internal domain, the address can't be resolved. It's understandable because the domain controller has the DNS Server installed which knows nothing about the external company.com domain. Is it possible to configure the internal DNS server to properly handle both the internal and external domain names? For example, I want all local DNS queries which can't be resolved locally (like www.company.com) to be forwarded to the external DNS server. Thanks, John Tag: VMConnect from Windows XP/Vista Tag: 109691
  - 5
    - Logon as a service, batch job, and act as part of the operating system? Gurus, You know when you install a third-party application which need a domain-level service account to run, and you install the service and then during or after the installation when you tell the service who to log on as, a dialog box pops up and says "XXX service has been given the following rights: ..." I forgot what those rights were. Aren't they: Logon as a service Logon as a batch job Act as part of the operating system? -- Spin Tag: VMConnect from Windows XP/Vista Tag: 109687
  - 6
    - Remote User Access I am having an odd problem. I which to make a user part of a non-admin user to access their desktop remotely. When the user is added to remote no dice. Only to admin does it work. How can this be fixed? -- Member - Liberal International This is doctor@nl2k.ab.ca Ici doctor@nl2k.ab.ca God, Queen and country! Beware Anti-Christ rising! Remember Christ is the reason for the season. Tag: VMConnect from Windows XP/Vista Tag: 109686
  - 7
    - New network on different site - same or seperate domain? Hi there, Just wondering if anyone could offer any advice on this issue. I am in the process of setting up a new network domain in a new colo data centre. The plan is to setup about 4 new servers and eventually joing them upto our existing win 2003 domain running in another datacentre using a metro ethernet connection between the two. I was thinking of setting up the new solution as a new domain and once it was up and running properly then join it to the other domain. Is this possible? What is the best way to set this up? Any tips and suggestions gratefully received. Thanks in advance Tag: VMConnect from Windows XP/Vista Tag: 109670
  - 8
    - Disabled Domain Controller I have a DC that I thought was dead for good, so I removed it through asdiedit. Later I find out that because of other network issues that I have, I needed to have that server back up, so was able to resurect it. It re-registered itself in DNS and is serving login requests. But, it shows in Active Directory as disabled as well as there are no NTDS settings. Can this be fixed? If I log into that particular DC, it's Sites and Settings have the the NTDS settings, as it has never received replication from the other servers that it is gone. So, two questions, can I enable the DC machine account somehow? and Is there somehow of repairing the NTDS settings? Thanks. Tag: VMConnect from Windows XP/Vista Tag: 109669
  - 9
    - ABE not working no matter what I do, ABE appears to do nothing that it claims to do....anyone else have this issue? no matter how I set this up, you can still see all the folders that you have no rights to access. I am trying to to hide folder names that the users have no rights to. thanks, Bill Tag: VMConnect from Windows XP/Vista Tag: 109668
  - 10
    - Importing COM+ Apps into Windows 2008 server I have exported a COM+ application from Windows 2003 server (32bit) and trying to import it into a Windows 2008 server (64bit) and getting an error message. THe message is "Error Code 80131700". It will not import at all with this server. I tray a library package and that installed but a server application fails. Are there any special instructions or processes to import W2K3 COM+ apps? Kevin Tag: VMConnect from Windows XP/Vista Tag: 109654
  - 11
    - Monitor HD Activity I'm look for a utility that will tell me what application, services, etc. is access the drive. I'm using Performance montiory and I can that something has the HD very busy, but I don't know what is doing it. How can I track this down. Server is 2003 with RAID 5 Thanks, Bill Tag: VMConnect from Windows XP/Vista Tag: 109646
  - 12
    - How do users still have 'unique settings' after Application Data c Hi, I am just wondering. I noticed App Data was getting too large for indivdual profiles and so decided to keep all profiles to access a single App Data so it could be administered easy and so I could 'add' settings for applications easily. But something wierd is going on. Programs such as Microsoft Outlook or Microsoft Word are retaining user's custom settings. This is perfect, as I wanted users to have this freedom. I just do not understand. For Example: In Outlook, all profiles have been set to acquire and save e-mail to U:\Email\folders.pst. However, the account settings have not. I always imagined this was saved in App Data or Local Settings, however, a) if it was in App Data it would conflict with other people's account details b) if it was local settings it would not work on other pcs. How come this is still working? where are things like account details being saved? registry? ntuser.dat? Sorry I am confused TIA Sam Tag: VMConnect from Windows XP/Vista Tag: 109642
  - 13
    - How do I get desktops to sync for roaming profiles Hello, I'd like the laptops to copy everything the workstations have on the desktop profile and vice versa when they log onto the domain. How do I do this please? Tag: VMConnect from Windows XP/Vista Tag: 109641
  - 14
    - Access denied on Iomega Network drive in Windows 2003 R2 We have an Iomega 250Gbyte network hard drive that was used to back up files from a Windows 2000 server that has failed. This drive was available to all users on our network. We have installed a new server running Windows 2003 Standard Edition 32 bit with no access controls specifically invoked. The Iomega drive can be found and mapped in Windows Explorer but none of the folders or files on it can be seen or accessed. Any attempt to create a new folder, for instance, gives 'Access is Denied'. We have added now a second (new) Iomega 250 Gbyte drive that gives the same result. These drives are also now no longer accessible by other users on the network, whichever version of Windows they are using. We have XP professional, 2000 and 98SE users. The drives themselves do not have any way of setting access permissions so there must be something in Windows 2003 server that is causing this. What is it and how do we overcome it? -- Bruce Wallace Tag: VMConnect from Windows XP/Vista Tag: 109640
  - 15
    - PF Usage at 5.76 GB Hi group, I've built an Exchange Server whose page file usage rises to 5.75 GB. Here are the details of the build: Windows 2003 SP2 - 2 GB of RAM - /3GB and /USERVA=3030 are set. Exchange 2003 SP2 The page file is set to 'System Managed Size'. I've ran the EXBPA and it comes back clean. Perfmon shows the following processes using the majority of VM. mad.exe - 1,116,696K NTRTScan.exe - 579,052K (OfficeScan) TmListen.exe - 572,604K (OfficeScan) store.exe - 570,452K svchost.exe - 568,308K winlogon - 558,884K cqmgsrv.exe - 553,932K JTF5FD.exe - 551,384K QAvMngrSrvAgent.exe - 565,820K (Quest Software) Thank you for any help. Tag: VMConnect from Windows XP/Vista Tag: 109635
  - 16
    - kb310316 : MoveSecurityAttributes Dword 0 doesn't work I have modified the registry as described in kb 310316 by adding following value: HKLMACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer MoveSecurityAttributes : DWORD : 0 But security attributes are still being moved along with the files. How do I correct this issue? Tag: VMConnect from Windows XP/Vista Tag: 109629
  - 17
    - Moving data between servers? Hello again, Over the weekend I tried to move tons of data from one server to the other. The source server is a DC and I was logged in as the Administrator for the domain. I have two problems I hope someone can help me with! 1) I got permission denied on quite a few files. Why??? I'm the domain administrator and this account owns all the folders, why would I get permission denied??? 2) The destination copy had all the permissions screwed up, like no permissions were preserved at all. How do I do a move and preserve the ownership and permissions??? Is there a data migration utility that I should be looking at as opposed to the standard copy? -brian brian@visionpro.com Tag: VMConnect from Windows XP/Vista Tag: 109624
  - 18
    - management utility hi everyone, what would you say is the best utility available for windows / AD management - is there any one utility that will handle group policy, user management, scripts etc all in one place? thanks, Bill Tag: VMConnect from Windows XP/Vista Tag: 109622
  - 19
    - rights to users home folder Hi, I am trying to set up the proper rights to give users a home directory on a win 2k3 server. the file structure is like this: \\server\ou\users with each user having his own folder like this: \\server\ou\users\user1....user2....user3....etc. is there an easy way to give them rights to their own folder without having rights to all the other folders in the \users folder? thanks in advance Bill Tag: VMConnect from Windows XP/Vista Tag: 109620
  - 20
    - Memory Leak I'm having a problem where every few weeks or so, my server gets hosed. All of the sudden it stops accepting network connections. Usually a reboot does the trick. We also notice that an error is always written to the event log whenever this occurs. The errror is "The server was unable to allocate from the system nonpaged pool because the pool was empty." After doing some research on the error, we figured that the problem was a memory leak. We have been running pool monitor for the last week. The tag called STRG has climbed all week. It is now at about 120mb. I guess this is our culprit - however what is STRG? Tag: VMConnect from Windows XP/Vista Tag: 109618
  - 21
    - Globally changin all users in AD Good morning Group, I have what I hope to be a quick question: I moved gigatons of data to a new server over the weekend and I need to update everyones home directory path in Active Directory. The path is now currently set to \\Oldserver\Users\<Username> and I need to make it \\Newserver\Users\<Username>. How can I do this globally withough having to touch each user account? Thanks, -brian brian@visionpro.com Tag: VMConnect from Windows XP/Vista Tag: 109615
  - 22
    - ISA Server Dear Sir, We have a ISA 2006 Server running in Windows 2003 Server as a Proxy Server. While accessing a link of one website to upload some files ,a window is prompting for Proxy authentication. Even i provide login name and password , the following error is appearing Server Error http/1.1 407. But when i access the same link for uploading some files without Proxy, it is going through. So somewhere we need to change the settings in Proxy to stop the particular authentication. Please help. Regards Abdul Rahuman.M Tag: VMConnect from Windows XP/Vista Tag: 109610
  - 23
    - W2k8: Images at login - how to remove them? Hi, at login, Windows Server 2008 shows a list of icons with names on it to = select. How can I get rid of these and revert back to the login prompt = where users are supposed to type their name in? TIA, Axel Dahmen Tag: VMConnect from Windows XP/Vista Tag: 109609
  - 24
    - Windows Vista/Windows Server 2008: GUI Improvements Required Hi, Evaluating Vista/Server 2008 for migration from W2k, W2k3, XP I noticed = a couple of drawbacks when using those OSs. I've compiled the problems and put them all into one issue here instead = of creating separate issues for all of them. -- 1 -- : Keyboard handling: It's very straining to use Vista/Server = 2008 by keyboard. It should by far be better supported, like in the previous = Windows versions. Current drawbacks are: -- 1.1 -- : Common Dialog File Open/Save boxes are missing keyboard shortcuts, e.g. for creating new folders (previously <ALT>+<F>-<W>-<F>). -- 1.2 -- : Using Windows Explorer with the keyboard becomes horror: -- 1.2.1 -- : Opening Windows Explorer (=3DWE) with <FLAG>+<E> gives = focus to the ListView instead of the TreeView control. So a reverse Tab = <SHIFT>+<TAB> is required to navigate the tree. (It's very uncommon that any action is required at the "Computer" node, so TreeView navigation is usually = *always* the first thing to be done in Windows Explorer.) -- 1.2.2 -- : Navigating the WE TreeView doesn't update the ListView. = It's required to hit the [RETURN] key to get the ListView updated. This makes browsing quite awkward to do. -- 1.2.3 -- : Tab sequence in WE is very strange! Usually, switching = focus between TreeView and ListView is just a one-tab sequence (you just have = to press the <TAB> key once). But after hitting [RETURN] on the TreeView, = the ListView becomes 4 <TAB> hits away! -- 1.3 -- : SQL Server 2005 Management Studio doesn't provide a quick = "Open Database Connection" shortcut (previously <CTRL> + <O>, now only <F8>-<ALT>+<V> [on German version]) -- 1.4 -- : Internet Explorer 7 doesn't provide a shortcut for setting = focus to the address bar (formerly <ALT>+<D>). So it's very hard to correct = typos after hitting [RETURN]. (Awkward, but yet best workaround: <CTRL>+<E> - <SHIFT>+<TAB> - <SHIFT>+<TAB>) -- 1.5 -- : The new Start menu is very unhandy. Just mentioning it to keep the classic view available in future Windows versions: I've traditionally arranged my (classic) start menu tree in a = way to quickly reach any program by simply pressing the <FLAG> key plus the = first letter of a Start menu entry to finally reach a program entry (e.g. <FLAG>-<P>-<O>-<W> which is "Programs - Office - Word 2003" ...or... <FLAG>+<P>+<D>+<8>+<S> which is "Programs - Development Tools - 8_Visual Studio 2005 - S_Visual Studio"). (This is more easy to do in German than = in English because of default entries starting with the same letter in = English [e.g. "Accessories/Administrative Tools"]). So I'll stick to the classic Start menu version. -- 2 -- : Copy File dialog doesn't provide useful information. Even = after updating Vista to SP1, the Copy File dialog still doesn't display which = file currently is copied. So when copying large files the user can't tell = which file is currently copied and, thus, isn't free for use. -- 3 -- : Color Schema: Hover color is (almost) same as selection color. = So it's hard to tell if an entry has been selected or if the mouse pointer = is just hovering above a ListView entry in WE. -- 4 -- : Back button in WE doesn't provide a history list. So it's impossible to go back in history and skip a recently visited folder that might have become unavailable. -- 5 -- : WE and Common Dialogs are missing "Navigate to parent node" functionality. Thanks for taking the time and eventually forwarding my = concerns/suggestions to the Vista/Server 2008 group. Axel Dahmen www.axeldahmen.com Tag: VMConnect from Windows XP/Vista Tag: 109608
  - 25
    - Windows Mail in Windows Server 2008 Hi, Where is Windows Mail in Windows Server 2008? I installed Desktop Experience, but still can't find Windows Mail on the domain controller or stand-alone servers. Thanks, John Tag: VMConnect from Windows XP/Vista Tag: 109605

Hi

We installed the latest Windows 2008 Enterprise x64 with Hyper-v role.
Everything works fine including connection with vmconnect.exe on that
machine. May because of the x64 os the vmconnect.exe ends up with a .NET
error when using with windows XP:
Faulting application vmconnect.exe, version 6.0.6001.17101, stamp 473fa981,
faulting module kernel32.dll, version 5.1.2600.3119, stamp 46239be1, debug?
0, fault address 0x00012a5b.

Where to get the vmconnect for x32 os? Or is this another problem?

Thanks for help
Jan

Top