HP ProLiant Opteron 1210 or Xeon 3040

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Moving CA and Licensing Services Hey Everyone, We have new servers in place. I wish to migrate our CA and Licensing services across then demoting the old services. What is the best way of doing? Regards, Mark Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109693
  - 2
    - External and internal domains and DNS Server Hi, I have the company.com Internet domain which serves the company's public Internet website at www.company.com. The authoritative name server for this domain is somewhere in the Internet. Now I installed a new domain controller on Windows Server 2008 for a new internal domain which I called company.com as well. I guess it wasn't a wise decision because if I type www.company.com on a machine that belongs to the internal domain, the address can't be resolved. It's understandable because the domain controller has the DNS Server installed which knows nothing about the external company.com domain. Is it possible to configure the internal DNS server to properly handle both the internal and external domain names? For example, I want all local DNS queries which can't be resolved locally (like www.company.com) to be forwarded to the external DNS server. Thanks, John Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109691
  - 3
    - Logon as a service, batch job, and act as part of the operating system? Gurus, You know when you install a third-party application which need a domain-level service account to run, and you install the service and then during or after the installation when you tell the service who to log on as, a dialog box pops up and says "XXX service has been given the following rights: ..." I forgot what those rights were. Aren't they: Logon as a service Logon as a batch job Act as part of the operating system? -- Spin Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109687
  - 4
    - Remote User Access I am having an odd problem. I which to make a user part of a non-admin user to access their desktop remotely. When the user is added to remote no dice. Only to admin does it work. How can this be fixed? -- Member - Liberal International This is doctor@nl2k.ab.ca Ici doctor@nl2k.ab.ca God, Queen and country! Beware Anti-Christ rising! Remember Christ is the reason for the season. Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109686
  - 5
    - New network on different site - same or seperate domain? Hi there, Just wondering if anyone could offer any advice on this issue. I am in the process of setting up a new network domain in a new colo data centre. The plan is to setup about 4 new servers and eventually joing them upto our existing win 2003 domain running in another datacentre using a metro ethernet connection between the two. I was thinking of setting up the new solution as a new domain and once it was up and running properly then join it to the other domain. Is this possible? What is the best way to set this up? Any tips and suggestions gratefully received. Thanks in advance Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109670
  - 6
    - Disabled Domain Controller I have a DC that I thought was dead for good, so I removed it through asdiedit. Later I find out that because of other network issues that I have, I needed to have that server back up, so was able to resurect it. It re-registered itself in DNS and is serving login requests. But, it shows in Active Directory as disabled as well as there are no NTDS settings. Can this be fixed? If I log into that particular DC, it's Sites and Settings have the the NTDS settings, as it has never received replication from the other servers that it is gone. So, two questions, can I enable the DC machine account somehow? and Is there somehow of repairing the NTDS settings? Thanks. Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109669
  - 7
    - ABE not working no matter what I do, ABE appears to do nothing that it claims to do....anyone else have this issue? no matter how I set this up, you can still see all the folders that you have no rights to access. I am trying to to hide folder names that the users have no rights to. thanks, Bill Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109668
  - 8
    - Importing COM+ Apps into Windows 2008 server I have exported a COM+ application from Windows 2003 server (32bit) and trying to import it into a Windows 2008 server (64bit) and getting an error message. THe message is "Error Code 80131700". It will not import at all with this server. I tray a library package and that installed but a server application fails. Are there any special instructions or processes to import W2K3 COM+ apps? Kevin Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109654
  - 9
    - Monitor HD Activity I'm look for a utility that will tell me what application, services, etc. is access the drive. I'm using Performance montiory and I can that something has the HD very busy, but I don't know what is doing it. How can I track this down. Server is 2003 with RAID 5 Thanks, Bill Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109646
  - 10
    - How do users still have 'unique settings' after Application Data c Hi, I am just wondering. I noticed App Data was getting too large for indivdual profiles and so decided to keep all profiles to access a single App Data so it could be administered easy and so I could 'add' settings for applications easily. But something wierd is going on. Programs such as Microsoft Outlook or Microsoft Word are retaining user's custom settings. This is perfect, as I wanted users to have this freedom. I just do not understand. For Example: In Outlook, all profiles have been set to acquire and save e-mail to U:\Email\folders.pst. However, the account settings have not. I always imagined this was saved in App Data or Local Settings, however, a) if it was in App Data it would conflict with other people's account details b) if it was local settings it would not work on other pcs. How come this is still working? where are things like account details being saved? registry? ntuser.dat? Sorry I am confused TIA Sam Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109642
  - 11
    - How do I get desktops to sync for roaming profiles Hello, I'd like the laptops to copy everything the workstations have on the desktop profile and vice versa when they log onto the domain. How do I do this please? Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109641
  - 12
    - Access denied on Iomega Network drive in Windows 2003 R2 We have an Iomega 250Gbyte network hard drive that was used to back up files from a Windows 2000 server that has failed. This drive was available to all users on our network. We have installed a new server running Windows 2003 Standard Edition 32 bit with no access controls specifically invoked. The Iomega drive can be found and mapped in Windows Explorer but none of the folders or files on it can be seen or accessed. Any attempt to create a new folder, for instance, gives 'Access is Denied'. We have added now a second (new) Iomega 250 Gbyte drive that gives the same result. These drives are also now no longer accessible by other users on the network, whichever version of Windows they are using. We have XP professional, 2000 and 98SE users. The drives themselves do not have any way of setting access permissions so there must be something in Windows 2003 server that is causing this. What is it and how do we overcome it? -- Bruce Wallace Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109640
  - 13
    - PF Usage at 5.76 GB Hi group, I've built an Exchange Server whose page file usage rises to 5.75 GB. Here are the details of the build: Windows 2003 SP2 - 2 GB of RAM - /3GB and /USERVA=3030 are set. Exchange 2003 SP2 The page file is set to 'System Managed Size'. I've ran the EXBPA and it comes back clean. Perfmon shows the following processes using the majority of VM. mad.exe - 1,116,696K NTRTScan.exe - 579,052K (OfficeScan) TmListen.exe - 572,604K (OfficeScan) store.exe - 570,452K svchost.exe - 568,308K winlogon - 558,884K cqmgsrv.exe - 553,932K JTF5FD.exe - 551,384K QAvMngrSrvAgent.exe - 565,820K (Quest Software) Thank you for any help. Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109635
  - 14
    - kb310316 : MoveSecurityAttributes Dword 0 doesn't work I have modified the registry as described in kb 310316 by adding following value: HKLMACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer MoveSecurityAttributes : DWORD : 0 But security attributes are still being moved along with the files. How do I correct this issue? Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109629
  - 15
    - Moving data between servers? Hello again, Over the weekend I tried to move tons of data from one server to the other. The source server is a DC and I was logged in as the Administrator for the domain. I have two problems I hope someone can help me with! 1) I got permission denied on quite a few files. Why??? I'm the domain administrator and this account owns all the folders, why would I get permission denied??? 2) The destination copy had all the permissions screwed up, like no permissions were preserved at all. How do I do a move and preserve the ownership and permissions??? Is there a data migration utility that I should be looking at as opposed to the standard copy? -brian brian@visionpro.com Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109624
  - 16
    - management utility hi everyone, what would you say is the best utility available for windows / AD management - is there any one utility that will handle group policy, user management, scripts etc all in one place? thanks, Bill Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109622
  - 17
    - rights to users home folder Hi, I am trying to set up the proper rights to give users a home directory on a win 2k3 server. the file structure is like this: \\server\ou\users with each user having his own folder like this: \\server\ou\users\user1....user2....user3....etc. is there an easy way to give them rights to their own folder without having rights to all the other folders in the \users folder? thanks in advance Bill Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109620
  - 18
    - Memory Leak I'm having a problem where every few weeks or so, my server gets hosed. All of the sudden it stops accepting network connections. Usually a reboot does the trick. We also notice that an error is always written to the event log whenever this occurs. The errror is "The server was unable to allocate from the system nonpaged pool because the pool was empty." After doing some research on the error, we figured that the problem was a memory leak. We have been running pool monitor for the last week. The tag called STRG has climbed all week. It is now at about 120mb. I guess this is our culprit - however what is STRG? Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109618
  - 19
    - Globally changin all users in AD Good morning Group, I have what I hope to be a quick question: I moved gigatons of data to a new server over the weekend and I need to update everyones home directory path in Active Directory. The path is now currently set to \\Oldserver\Users\<Username> and I need to make it \\Newserver\Users\<Username>. How can I do this globally withough having to touch each user account? Thanks, -brian brian@visionpro.com Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109615
  - 20
    - ISA Server Dear Sir, We have a ISA 2006 Server running in Windows 2003 Server as a Proxy Server. While accessing a link of one website to upload some files ,a window is prompting for Proxy authentication. Even i provide login name and password , the following error is appearing Server Error http/1.1 407. But when i access the same link for uploading some files without Proxy, it is going through. So somewhere we need to change the settings in Proxy to stop the particular authentication. Please help. Regards Abdul Rahuman.M Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109610
  - 21
    - W2k8: Images at login - how to remove them? Hi, at login, Windows Server 2008 shows a list of icons with names on it to = select. How can I get rid of these and revert back to the login prompt = where users are supposed to type their name in? TIA, Axel Dahmen Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109609
  - 22
    - Windows Vista/Windows Server 2008: GUI Improvements Required Hi, Evaluating Vista/Server 2008 for migration from W2k, W2k3, XP I noticed = a couple of drawbacks when using those OSs. I've compiled the problems and put them all into one issue here instead = of creating separate issues for all of them. -- 1 -- : Keyboard handling: It's very straining to use Vista/Server = 2008 by keyboard. It should by far be better supported, like in the previous = Windows versions. Current drawbacks are: -- 1.1 -- : Common Dialog File Open/Save boxes are missing keyboard shortcuts, e.g. for creating new folders (previously <ALT>+<F>-<W>-<F>). -- 1.2 -- : Using Windows Explorer with the keyboard becomes horror: -- 1.2.1 -- : Opening Windows Explorer (=3DWE) with <FLAG>+<E> gives = focus to the ListView instead of the TreeView control. So a reverse Tab = <SHIFT>+<TAB> is required to navigate the tree. (It's very uncommon that any action is required at the "Computer" node, so TreeView navigation is usually = *always* the first thing to be done in Windows Explorer.) -- 1.2.2 -- : Navigating the WE TreeView doesn't update the ListView. = It's required to hit the [RETURN] key to get the ListView updated. This makes browsing quite awkward to do. -- 1.2.3 -- : Tab sequence in WE is very strange! Usually, switching = focus between TreeView and ListView is just a one-tab sequence (you just have = to press the <TAB> key once). But after hitting [RETURN] on the TreeView, = the ListView becomes 4 <TAB> hits away! -- 1.3 -- : SQL Server 2005 Management Studio doesn't provide a quick = "Open Database Connection" shortcut (previously <CTRL> + <O>, now only <F8>-<ALT>+<V> [on German version]) -- 1.4 -- : Internet Explorer 7 doesn't provide a shortcut for setting = focus to the address bar (formerly <ALT>+<D>). So it's very hard to correct = typos after hitting [RETURN]. (Awkward, but yet best workaround: <CTRL>+<E> - <SHIFT>+<TAB> - <SHIFT>+<TAB>) -- 1.5 -- : The new Start menu is very unhandy. Just mentioning it to keep the classic view available in future Windows versions: I've traditionally arranged my (classic) start menu tree in a = way to quickly reach any program by simply pressing the <FLAG> key plus the = first letter of a Start menu entry to finally reach a program entry (e.g. <FLAG>-<P>-<O>-<W> which is "Programs - Office - Word 2003" ...or... <FLAG>+<P>+<D>+<8>+<S> which is "Programs - Development Tools - 8_Visual Studio 2005 - S_Visual Studio"). (This is more easy to do in German than = in English because of default entries starting with the same letter in = English [e.g. "Accessories/Administrative Tools"]). So I'll stick to the classic Start menu version. -- 2 -- : Copy File dialog doesn't provide useful information. Even = after updating Vista to SP1, the Copy File dialog still doesn't display which = file currently is copied. So when copying large files the user can't tell = which file is currently copied and, thus, isn't free for use. -- 3 -- : Color Schema: Hover color is (almost) same as selection color. = So it's hard to tell if an entry has been selected or if the mouse pointer = is just hovering above a ListView entry in WE. -- 4 -- : Back button in WE doesn't provide a history list. So it's impossible to go back in history and skip a recently visited folder that might have become unavailable. -- 5 -- : WE and Common Dialogs are missing "Navigate to parent node" functionality. Thanks for taking the time and eventually forwarding my = concerns/suggestions to the Vista/Server 2008 group. Axel Dahmen www.axeldahmen.com Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109608
  - 23
    - Windows Mail in Windows Server 2008 Hi, Where is Windows Mail in Windows Server 2008? I installed Desktop Experience, but still can't find Windows Mail on the domain controller or stand-alone servers. Thanks, John Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109605
  - 24
    - Server in DMZ We have a Windows 2003 server setup for file sharing. We have internal and external users accessing this server. We have more external users accessing this server than internal users. We put this server in the DMZ. Is there a way to secure this server so that hackers won't be able to get to it? Thanks. Diane Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109598
  - 25
    - Windows Server 2003 configuration question The hard drive crashed on the server of one of my clients and upon reinstallation, the IT person did not re-create the domain because it was too much work and he wants to wait until Small Business Server 2008 is out to reconfigure the server. Now the server is in a different workgroup than the workstations and it is creating big problems with permission and access, but I am running into a wall trying to get him to change it. His reasoning for making the change from a domain to a workgroup was that if he configured the server as domain again, he would have to redo all the workstations. Am I wrong in assuming that if he had configured the new hard drive with the same domain and users as before, the workstation should have just found the server again, just as they did before? I searched the net and found nothing about a possible release date for SBS 2008. Does anyone believe this is going to happen soon? Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109583
- Next
  - 1
    - Error Message Occurred For Unsharing a Folder We have a file sharing setup on Windows 2003 Domain Controller. When we unshare the folder, we got the error message "An error occurred while trying to delete share speech. The share must be removed from Distributed File System before it can be deleted". Do you have any suggestions on how to unshare the folder? Thanks. Diane Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109579
  - 2
    - Windows 2008 and WebDAV Mini Redirector I can't use WebDAV webfolders with my Windows 2008 Terminal server. As I understand, Windows 2008 and Windows Vista share the same codebase. So I thought it shouldn't be too hard to make it work with Windows 2008. I searched for the driver that Windows Vista uses "mrxdav.sys" and it exists in some subfolder of Windows\winsxs. But it seems that it is not installed. Is there a way to make the WebDAV Mini Redirector work with Windows 2008? And if so, would that be supported by Microsoft? Greetings, Fabian Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109568
  - 3
    - Server 2008 - Installing non-TS CALs Potentially silly question, but I haven't seen this addressed. I have 250 CALs purchased. Where do I tell Server 2008 that I have these CALs? These aren't for Terminal Services, just for people on my internal network to access the server. My 2003 Server has an applet off the Control Panel, I don't see the same thing in 2008. Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109560
  - 4
    - Edition of Server 2003? I just did a test install of Windows server 2003 on a system that I'm going to upgrade (soon) from 2000 server to 2003 server. I did a clean install into a new partition. The CD say "Windows Server 2003 R2 Standard Edition". There is Disc 1 and Disc 2. Disc 1 has a part number of X11-73011. When I installed the software and the system rebooted, Control Panel/System (along with the boot splash screen) tell me that I have Windows Server 2003 Enterprise Edition. Is this a known confusion of the versions? I searched Google but didn't find anything relevant. If Control Panel/System tells me that I have Enterprise Edition, is this the version I really have? The CDs AND the COA are apparently mislabeled! The COA with the 25-character product key says "Windows Svr Std 2003 R2 1- 4CPU 5Clt" (OEM Software). That sounds like standard edition to me. Thanks for any insight on this strangeness. David Walker Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109557
  - 5
    - SME Windows Job Scheduling Software Does anybody know of a good Windows job scheduling package for small to medium enterprises. Functionality should include job dependancies and user security. Thanks for any help, Steve Cage Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109555
  - 6
    - Inactivate a dynamic partition? How do you inactivate a dynamic partition? The Diskpart program only works on basic disks. Also, how do you tell which partition(s) are marked Active? I don't see that info in Disk Management snap-in. This question applies to Windows server 2003 (and Windows Server 2000, which I am upgrading from). Second, the one time I booted from a floppy (just as an experiment), and then told the boot loader to load the second partition on disk 0, then looked at Disk Management: Disk Management still told me that the FIRST partition on disk 0 was the "system" volume. The second partition was marked Boot. I can't find exactly what "system" means, or why the first partition on disk 0 would be marked "system" when I actually booted the computer from the floppy drive. I would think the floppy would be "system" and the second partition would be "boot". Thanks. Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109553
  - 7
    - Multiple logoffs required I have a small network (2 DCs running Server 2003, 10 XP workstations). Recently, a few people have had to select the Log off option twice in order to actually log off. The first time, they are prompted w/the standard "Are you sure you want to log off?" question, but even when clicking Yes, they stay logged in. They have to do the process a second time in order to successfully log off. This doesn't happen with every user, but for the ones who are affected, it happens every time. TIA for any ideas. Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109548
  - 8
    - Volume Shadow Copy - Windows 2003 Does anyone know what the latest build is for this? I have KB940349 as being the latest for Windows 2003. Is there any newer builds? Thanks in Advance, Eric Sabo Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109542
  - 9
    - OpenSSH server on Windows Server 2003? I do a lot of remote administration on Linux boxes through an SSH connection... It this also possible on Windows 2003 server? Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109520
  - 10
    - EventLog Mixed We are using Windows Server 2003 SP1, last week we had a power outage, due to which server was re-booted without proper shut down. After getting up the server eventlog is all mixed up, that is all three Application, System and Security logs are coming in all three (if you click on Application, System and Security logs are shown as well, same with the other two). I checked the Log file names they are pointing to, and it seems to be right, Application eventlog is pointing to AppEvent.Evt, the other two to SecEvent.Evt and SysEvent.Evt respectively. We want to know what might've happened that has caused this and what can we do repair it, without affecting the rest of the server. The other abnormal thing after the power outage has been the delay in showing up of the login screen, after we use the remote connection to connect to the server, previously it used to load up immediately, now it takes around 20 to 40 sec, any idea why? Regards Sajid Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109513
  - 11
    - Best way to copy user's home areas onto a new drive We have just purchased a new faster storage systen, and need to move files for the user's home areas onto it. Current we have SERVER1 connected to a dell storage array which only has one bank populated. The array is shared as \\server1\home So each user's home area is set as \\server1\home\username What we need to do is move all the users home areas onto a new set of faster drives going into the same unit (i.e the same server). Firstly, how could I copy the files accross and retain all the ownerships and permissions? Bearing in mind we are talking about 1TB + of data so I dont want to have to keep on confirming. Secondly, once the copy job is done, would I be ok to just rename the old share to HOMEOLD and name the new one to HOME? Bearing in the mind the file structure will be the same, should all users home areas etc still work? Thanks if anyone has experience of doing this. Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109510
  - 12
    - NTP Server Question Greetings, I have one medium AD domain enviornment with 2 DCs , but I want a small portion of my domain computer members to recieve their time from a different NTP source. Is this possible? Basic Q's: 1. Are all members of the domain automatically synced with the DC's? 2. Do all computers have to be synced up with the DC's time to login to the domain? Please advise, thanks a million :) Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109508
  - 13
    - Can programs run without requiring a logon. I want to run say a file backup (using a commercially available scheduler) without having to be logged on. Sure the scheduler runs if I DISCONNECT administrator from Terminal Services. Can this be done in W2003? -- Regards Tom Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109505
  - 14
    - Compare Server 2008 and 2003 I'm a little bit familiar with Server 2008, just installed few 2008 servers. Can you please give few (5, 10, 20) most important features and benefits of Server 2008 because I'd like to test in my environment and compare 2003/2008 servers. Thnx! Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109504
  - 15
    - Server 2008 write permissions for web sites I am moving several web sites from a 2003 to a 2008 server. These sites use an Access 2000 database file to store information, and also permit uploading image files. On the old server I just gave the IUSR_ and NETWORK users modify permissions to the specified folders and it worked. With 2008 I have had to give the "everyone" account modify permissions to the folders in order to be able to write to the db or upload files. Even then, for some sites, it is still not working. The sites are all written using classic ASP. What is the correct account and permissions that need to be given write access to the db and files folders? Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109500
  - 16
    - Console Security Is there a way to limit the console access to the Administrator login only? Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109497
  - 17
    - Installing Server 2003 x64 From MSDN Disk Not sure if this is the right place to ask this, but I have been completely unsucessful in trying to get a hold of Microsoft. I am trying to install a Dell Server using my MSDN disks. I have been trying to install the 64 bit OS for Server 2003. When the server boots up, it only gives me the option of the 32 bit OS options, not 64bit. I contacted Dell to ensure the system is 64bit and it is. Does anyone know how to get the 64 bit option installed? I have tried burning just Server 2003 x64 to a CD but the system doesn't boot from CD either. It keeps saying no OS found. Any help would be greately appreciated! Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109492
  - 18
    - Windows 2008 Server and .NET Application Security Issue This is a multi-part message in MIME format. ------=_NextPart_000_000B_01C88B4A.E42BDDE0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hello, If this is not the right user group please point me to the right one. I moved my .Net 1.1 application to Windows 2008 Server and it only works = for Administrators and not regular users. It has to do with access to = Microsoft.ApplicationBlocks.ExceptionManagement I think When we installed Microsoft.ApplicationBlocks.ExceptionManagement we = did this for everyone and not the Admins only. The error message I am getting is: myApplication.exe Has Stopped working. Description: Stopped working Problem signature: Problem Event Name: CLR20r3 Problem Signature 01: myApplication.exe Problem Signature 02: 2.1.0.0 Problem Signature 03: 47755e77 Problem Signature 04: Microsoft.ApplicationBlocks.ExceptionManagement Problem Signature 05: 1.0.0.0 Problem Signature 06: 45fefc9a Problem Signature 07: 40 Problem Signature 08: 51 Problem Signature 09: System.Security.Security OS Version: 6.0.6001.2.1.0.18.38 Locale ID: 1033 Any Help is appreciated, Thank You, LVP ------=_NextPart_000_000B_01C88B4A.E42BDDE0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Diso-8859-1"> <META content=3D"MSHTML 6.00.6000.16608" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY> <DIV><FONT face=3DArial size=3D2>Hello,</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>If this is not the right user group = please point me=20 to the right one.</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>I moved my .Net 1.1 application to = Windows 2008=20 Server and it only works for Administrators and not regular = users.</FONT></DIV> <DIV><FONT face=3DArial size=3D2>It has to do with access to=20 Microsoft.ApplicationBlocks.ExceptionManagement I think</FONT></DIV> <DIV><FONT face=3DArial size=3D2>When we installed=20 Microsoft.ApplicationBlocks.ExceptionManagement  we did this for = everyone=20 and not the Admins only.</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>The error message I am getting = is:</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV>myApplication.exe Has Stopped working.</DIV> <DIV> </DIV> <DIV>Description:<BR>Stopped working</DIV> <DIV><BR>Problem signature:<BR>Problem Event Name: CLR20r3<BR>Problem = Signature=20 01: myApplication.exe<BR>Problem Signature 02: 2.1.0.0<BR>Problem = Signature 03:=20 47755e77<BR>Problem Signature 04:=20 Microsoft.ApplicationBlocks.ExceptionManagement<BR>Problem Signature 05: = 1.0.0.0<BR>Problem Signature 06: 45fefc9a<BR>Problem Signature 07: = 40<BR>Problem=20 Signature 08: 51<BR>Problem Signature 09: System.Security.Security<BR>OS = Version: 6.0.6001.2.1.0.18.38<BR>Locale ID: 1033</DIV> <DIV> <P><FONT face=3DArial size=3D2>Any Help is appreciated,</FONT></P> <P><FONT face=3DArial size=3D2>Thank You,</FONT></P> <P><FONT face=3DArial size=3D2>LVP</FONT></P> <P><FONT size=3D2></FONT> </P> <P><FONT size=3D2></FONT> </P> <P><FONT size=3D2></FONT> </P></DIV></BODY></HTML> ------=_NextPart_000_000B_01C88B4A.E42BDDE0-- Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109491
  - 19
    - Windows cannot connect to the domain I am getting the following message this server and this server has been on the domain for a while and was able to log in usually. But now its getting this message Windows cannot connect to the domain either because the domain controller is down or otherwise unavailable, or because your computer account was not found. Please try again later. If this message continues to appear contact your System Administrator for assistance. other machines can log in fine. Any idea why? This happened to a few other machines yesterday. Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109476
  - 20
    - RDP stopped working I don't know if anyone can shed any light on this. RDP stopped working on our 2003 Server. The machine is actually running SBS 2003 with sp2 (I am posting here since RDP is a more general Windows app). RDP was working on this server and then between one use and then next, several months ago it just stopped. Details: -Any client attempting to connect gets: "The client could not connect to remote computer." (Including localhost) -Remote Desktop is turned on in the Remote tab of System Properties. -Terminal Services is in Administration mode. -HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\TerminalServer\WinStations\RDP\PortNumber is set to 3389, but -"netstat -a" does not show port 3389 (although it does show others). -ISA is not installed and windows firewall is off. -As far as I am able to tell, windows thinks that Remote Desktop is ready to go but the port is not open. Any ideas? Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109473
  - 21
    - IT SLA's? Hi -- I know this might not be the correct foum, but I was hoping I could get some help. I need to create an SLA for our server environment primarily for our internal departments. Basically, we receive frequent requests to build new servers that may or may not require hardware purchases, software purchases, etc., in addition to laptop deployments etc. Typically, the turnaround is weeks to months depending on the nature of the request. To provide a baseline and guidinance to everyone, I wanted to set the expections so everyone knew that a particular request would take at least x number of days/weeks/months for turnaround. Most of the requests I get folks expect turnaround in a day or so; which is totally unrealistic. Not to mention I have more to do than just deploy/patch a new server/workstation. There are tones of dcoumentation and whatnot that accompanying any new server/workstation deployment. Any assistances, samples, or on-line resources would be great. This request is more of an internal SLA and a customer SLA for services, etc. Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109472
  - 22
    - Where to get downgrade key for 2008 to 2003? Hi, I have a new 2008 Server standard license agreement. According to http://www.microsoft.com/windowsserver2008/en/us/downgrade-rights.aspx I can downgrade to 2003 R2 Server standard but when I look up my license keys I only have one key listed. How do I get a 2003 key? (e.g. When I order Office 2007 there are three keys listed and when I ordered 2003 server there were 4 keys listed) Thanks Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109471
  - 23
    - Windows 2003 - Move from single drive to mirrored drives.. I had a quick question as I haven't found an easy or great way to do this yet. I want to take an existing Windows 2003 server install that is on a single hard drive and make it a mirrored install. Is there a way to do this without reloading the system? I want to add a second drive of the same size and just mirror it with the currently installed drive if possible. THanks for any ideas in advance. Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109468
  - 24
    - GPT Disk with Dynamic Volume offline after Server 2008 install won Ik have a 2,6 TB Dynamic basic volume on a GPT Disk. The disks is a raid 6 array on a promise supertrack 8350 controller. I boot from a basic disk. First I had Server 2003 sp2 with all updates installed and it worked fine. I installed Server 2008 enterprise (rtm) on the basic disk. The dynamic disk was offline, when I try to get it back on-line diskmanger just hangs. I tried Server 2003 R2 and 64 bit R2 again on the basic disk but I stil cannot get the volume on-line. Any Ideas? It is not a cluster, just a singel machine. Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109461
  - 25
    - Virtual Sound Cards? Hello, I am trying to set up a Dedicated Server that does not have a sound card with a Virtual Sound Card in order to get an application to run correctly. I have tried RigExpert's "Virtual Sound Card Drivers" but it is not working. Has anyone had any success in emulating a Sound Card? Thanks, -Brock Tag: HP ProLiant Opteron 1210 or Xeon 3040 Tag: 109443

I'm stuck between buying HP ProLiant ML 115 Opteron 1210 @ 1.8 GHz and
HP ProLiant ML 110 G4 Xeon 3040 1.86 GHz. All the rest of the specs
are the same. Difference of price is about =A310. But according to HP
UK's website Xeon 3040 is discontinued.

But my question is which processor is better? I have started MCSE, so
I'll be using it for my home lab/server.

PS. I've searched through the forum, only bechmark I found was between
Xeon 5000 vs Opteron 200 series. Here Xeon out performed but not when
it comes to power consumption.

Thanks in advance.

Top