Encrypt a folder

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - migrating from windows 2000 domain server to 2003 domain server first off, configuration is old windows 2000 domain server with 60 users in active directory new windows 2003 domain server with the same 60 users active directory both domain names are identical but not on the same network obviously workstation are mixed windows 2000 and windows xp professional i have installed windows 2003 server with all the latest SP's and updates from microsoft and it works just fine if i JOIN a new/exsisting computer to the domain. i am having a problem when logging onto the new 2003 domain server with workstations that were in the original 2000 domain. i do not want to re-join these workstations to the new server as it greats a new profile on each workstation and what a pain that would be sometimes it might take 2 or 3 logins then it logs in it seems as if the user login is (for lack of a better term) aware that this is a different server (or vice versa) i did some research and keep hitting on this SID situation can anyone point me in the right direction so i can just use the exsisting workstations and login to my new 2003 server. thanks in advance rich Tag: Encrypt a folder Tag: 112296
  - 2
    - DCOM error - The COM sub system is suppressing duplicate event log entries for a duration of 86400 seconds Gurus, Running Windows Server I am seeing the following DCOM error. I don't want event suppression to occur b/c I want to know what is actually going on here. Any ideas? Event Type: Information Event Source: DCOM Event Category: None Event ID: 10026 Date: 4/30/2008 Time: 6:08:56 PM User: N/A Computer: SERVER1 Description: The COM sub system is suppressing duplicate event log entries for a duration of 86400 seconds. The suppression timeout can be controlled by a REG_DWORD value named SuppressDuplicateDuration under the following registry key: HKLM\Software\Microsoft\Ole\EventLog. -- Spin Tag: Encrypt a folder Tag: 112291
  - 3
    - Adding to a Path in DOS? Hello, I have an existing path: c:\>PATH=C:\Program Files\HP\NCU;C:\Program Files\Support Tools\; I want to add F:\bea\jdk141_05\bin> to it. If I just say Path=F:\bea\jdk141_05\bin; it will overwrite all the other path info. How do I get it just to add to the end, and only for this session. After the reboot, i do not need it again. Thanks, Tmuld. Tag: Encrypt a folder Tag: 112288
  - 4
    - Print Server Hangs We have a Win 2k3 SP2 R2 server, Dual 1400 Mhz, 2 gb RAM. It is hosting right around 200 Lexmark printers. (Its only purpose in life) Out of the blue, it will hang and nobody can print to it anymore. When you go to the console or RD to it it is basically unresponsive. What we have found is in the task manager "lmabcoms.exe" runs at %99 to %100 usage and is the culprit. A hard reboot and it is peachy again for a couple of days. During normal operation, lmabcoms.exe does not take any CPU cycles, just chugs along in task manager. I am wondering if anyone else has similar problems using Lexmark printers hosted from a print server. We are in constant communication with Lexmark about the issue but they have not been able to solve it yet. We have rebuilt the server from scratch on several different hardware platforms and continue to have the same problem. lmabcoms.exe is the process for the Lexmark Enhanced Port and Lexmark Network Port, at least thats what Lemark and our researching point to. We have even had Lemark send us their latest and greatest version of lmabcoms.exe. Any ideas? Tag: Encrypt a folder Tag: 112286
  - 5
    - Redirecting users Hi, I'm not sure if if this is the right forum but here goes. I have a problem in that I have a load of Word documents with attached templates that are on a now defunct server. The problem is that Word now hangs for a long time looking for its template on non-existent server(it has been moved to a new server). Further investigation showed that this location is hardcoded in the Word document. A guy called Terry Farrell on the Word discussion group said that the only solution is to use the Windows Server Redirect command to redirect any requests for templates on the dead server to the new location. Can anyone tell me how to do this? Also, where would any code go? in a login script? Any help would be much appreciated as this is causing a real problem for my users, Thanks, Chris Tag: Encrypt a folder Tag: 112283
  - 6
    - Permission on Files/Folders I had a typo in the subject...re-posting my question: Using a command line tool such as XCACLS.exe, XCACLS.vbs, SetACL or a similar tool, can we change the permissions so one user/group can only list files but not read them (to see how big the files are)...Effectively, list on all folders and contents but no read access...Is that possible perhaps with a combination of allow/revoke? BTW-I am already using Access Based Enumeration on that server. Tag: Encrypt a folder Tag: 112275
  - 7
    - Question I am thinking of creating an own net for the servers so that they listen among if, but in turn, some of these servers, they should see the internal net for the users. I have all the servers with two net cards: NIC1: 10.0.100.x NIC2: 172.16.0.x My doubt. Server1 with 10.0.100.11 / 172.16.0.11 Server2 with 10.0.100.12 / 172.16.0.12 Server3 with 10.0.100.13 / 172.16.0.13 If I throw a process - do we put a robocopy - from Server1 to Server2 and do I want that he goes for the net 172.16.0.x, as I make it??, do I need a router?, to configure the switch??, static routes??? Thank you and forgive the nuisances. Tag: Encrypt a folder Tag: 112274
  - 8
    - When you have to backtrack and downgrade a DC Okay, so I have this book from Microsoft that's basically a guide to get from NT 4.0 to Server 2003. Of particular interest is the section where they talk about going back to an NT DC if there's and installation error or something. Now basically the procedure is: Keep a BDC off line just in case. When something goes wrong, take all 2003 DCs off the network Promote the BDC to a PDC. And I would imagine this works fine if no computer had ever logged on to the new domain. But say you got everything up and running just fine on 2003 and a few days later decided you needed to go back to NT for some reason. This is the scenario I'm trying to simulate. And whenever I do this simulation, I can indeed put the domain back to the NT machine, but any computer that's 2000 or newer that has logged onto the new domain will not log back into the NT version. (specifically because it adopts the DNS naming structure of my new domain name). NT machines, of course, do revert back to the old domain with no problems that I can see. So is there any particular way to get one of these machines that's logged in to the 2003 domain to revert back to the NT domain without having to manually rejoin the domain on each computer? Tag: Encrypt a folder Tag: 112273
  - 9
    - Delete cached local copy of mandatory profile and non roaming domain user profiles ? Hi. We are currently looking to deploy some Windows XP workstations on a 2003 Domain for development purposes. We are using a mix of mandatory profiles and general domain users that have NO roaming or mandatory profile. We are finding that the XP workstations are storing a local copy of the mandatory profiles and the gerneral domain user accounts as well. Can anyone confirm whether Windows should automatically remove Mandatory profiles when the user logs off, and if so can anyone suggest why a copy of the profiles are being left behind ? Similarly can anyone recommend how we can allow users with a basic domain user account (no roaming or mandatory profile) to logon to our XP workstations such that their locally created profile is automatically deleted when they logoff ? i.e. no matter the user type (even domain admin if possible) we would like to remove any locally stored user profiles. Thanks, Alex. Tag: Encrypt a folder Tag: 112270
  - 10
    - Server 2003 SP2 0x00000050 BSOD Can someone help me read this "analyze -v" from a memory dump file. I have a Windows 2003 terminal server, SP2, Dell Poweredge 1800, Dual 3.2 xeon hyperthreaded, 4gb RAM. Every night BSOD 0x00000050. Below is System eventlog entry and the result file of a memory.dmp file, read with the Microsoft debugger. Can anyone tell me why the server is abending? Thank you very much in advance. Ron Floyd Ronf@gbftech.com Event Type: Warning Event Source: USER32 Event Category: None Event ID: 1076 Date: 4/30/2008 Time: 10:50:43 PM User: EOASGA\administrator Computer: EOATS01 Description: The reason supplied by user EOASGA\Administrator for the last unexpected shutdown of this computer is: System Failure: Stop error Reason Code: 0x805000f Bug ID: Bugcheck String: 0x00000050 (0xc48e2000, 0x00000001, 0x808dea34, 0x00000000) Comment: 0x00000050 (0xc48e2000, 0x00000001, 0x808dea34, 0x00000000) For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 0f 00 05 08 .... Microsoft (R) Windows Debugger Version 6.9.0003.113 X86 Copyright (c) Microsoft Corporation. All rights reserved. Loading Dump File [C:\WINDOWS\MEMORY.DMP] Kernel Summary Dump File: Only kernel address space is available Symbol search path is: SRV*c:\websymbols*http://msdl.microsoft.com/ download/symbols Executable search path is: Windows Server 2003 Kernel Version 3790 (Service Pack 2) MP (4 procs) Free x86 compatible Product: Server, suite: TerminalServer Built by: 3790.srv03_sp2_gdr.070304-2240 Kernel base = 0x80800000 PsLoadedModuleList = 0x808a6ea8 Debug session time: Wed Apr 30 18:01:05.668 2008 (GMT-4) System Uptime: 0 days 17:40:15.568 Loading Kernel Symbols ...................................................................................................... Loading User Symbols PEB is paged out (Peb.Ldr = 7ffd900c). Type ".hh dbgerr001" for details Loading unloaded module list .. ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck 50, {c48e2000, 1, 808dea34, 0} Page 11a472 not present in the dump file. Type ".hh dbgerr004" for details Page 11a4e1 not present in the dump file. Type ".hh dbgerr004" for details PEB is paged out (Peb.Ldr = 7ffd900c). Type ".hh dbgerr001" for details PEB is paged out (Peb.Ldr = 7ffd900c). Type ".hh dbgerr001" for details Probably caused by : ntkrpamp.exe ( nt!HvpRecoverData+4a0 ) Followup: MachineOwner --------- 1: kd> !analyze -v ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* PAGE_FAULT_IN_NONPAGED_AREA (50) Invalid system memory was referenced. This cannot be protected by try- except, it must be protected by a Probe. Typically the address is just plain bad or it is pointing at freed memory. Arguments: Arg1: c48e2000, memory referenced. Arg2: 00000001, value 0 = read operation, 1 = write operation. Arg3: 808dea34, If non-zero, the instruction address which referenced the bad memory address. Arg4: 00000000, (reserved) Debugging Details: ------------------ Page 11a472 not present in the dump file. Type ".hh dbgerr004" for details Page 11a4e1 not present in the dump file. Type ".hh dbgerr004" for details PEB is paged out (Peb.Ldr = 7ffd900c). Type ".hh dbgerr001" for details PEB is paged out (Peb.Ldr = 7ffd900c). Type ".hh dbgerr001" for details WRITE_ADDRESS: c48e2000 FAULTING_IP: nt!HvpRecoverData+4a0 808dea34 f3a5 rep movs dword ptr es:[edi],dword ptr [esi] MM_INTERNAL_CODE: 0 DEFAULT_BUCKET_ID: DRIVER_FAULT BUGCHECK_STR: 0x50 PROCESS_NAME: wmiprvse.exe CURRENT_IRQL: 1 TRAP_FRAME: f4b7e9dc -- (.trap 0xfffffffff4b7e9dc) ErrCode = 00000002 eax=00004000 ebx=e480b000 ecx=00001000 edx=00000000 esi=e480b000 edi=c48e2000 eip=808dea34 esp=f4b7ea50 ebp=f4b7ea98 iopl=0 nv up ei pl nz na pe nc cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010206 nt!HvpRecoverData+0x4a0: 808dea34 f3a5 rep movs dword ptr es:[edi],dword ptr [esi] Resetting default scope LAST_CONTROL_TRANSFER: from 8085eced to 80827c63 STACK_TEXT: f4b7e94c 8085eced 00000050 c48e2000 00000001 nt!KeBugCheckEx+0x1b f4b7e9c4 8088c798 00000001 c48e2000 00000000 nt!MmAccessFault+0xb25 f4b7e9c4 808dea34 00000001 c48e2000 00000000 nt!KiTrap0E+0xdc f4b7ea98 808deeb4 e62afa80 00000000 00000000 nt!HvpRecoverData+0x4a0 f4b7eae8 808df719 e62afa80 00000000 e62affec nt!HvMapHive+0x188 f4b7eb00 808d7523 e62afc01 00000005 00000000 nt!HvInitializeHive+0x42d f4b7eb6c 808c8cf3 f4b7eba8 00000005 00000000 nt!CmpInitializeHive +0x203 f4b7ebc4 808ca7c0 f4b7ecf4 00000000 f4b7ec54 nt!CmpInitHiveFromFile +0x91 f4b7ebe8 808c4757 f4b7ecbc f4b7ec58 f4b7ec4c nt!CmpCmdHiveOpen+0x1e f4b7ec98 808bc1e5 f4b7ecd4 f4b7ecbc 00000000 nt!CmLoadKey+0xcf f4b7ed3c 808bc3fc 00e7d9ec 00e7da04 00000000 nt!NtLoadKeyEx+0x25b f4b7ed54 8088978c 00e7d9ec 00e7da04 00e7da34 nt!NtLoadKey+0x14 f4b7ed54 7c8285ec 00e7d9ec 00e7da04 00e7da34 nt!KiFastCallEntry+0xfc WARNING: Frame IP not in any known module. Following frames may be wrong. 00e7da34 00000000 00000000 00000000 00000000 0x7c8285ec STACK_COMMAND: kb FOLLOWUP_IP: nt!HvpRecoverData+4a0 808dea34 f3a5 rep movs dword ptr es:[edi],dword ptr [esi] SYMBOL_STACK_INDEX: 3 SYMBOL_NAME: nt!HvpRecoverData+4a0 FOLLOWUP_NAME: MachineOwner MODULE_NAME: nt IMAGE_NAME: ntkrpamp.exe DEBUG_FLR_IMAGE_TIMESTAMP: 45ec0a19 FAILURE_BUCKET_ID: 0x50_W_nt!HvpRecoverData+4a0 BUCKET_ID: 0x50_W_nt!HvpRecoverData+4a0 Followup: MachineOwner Tag: Encrypt a folder Tag: 112265
  - 11
    - XP Clients slow on W2k3 Domain after long idle time. Each morning when users come in. If the user did not log off, the computer is very slow until the user logs off and logs back in. Also, the login takes 2-3 minutes, which seems a bit too long. Any help would be greatly appreciated. Tag: Encrypt a folder Tag: 112262
  - 12
    - How much bandwidth is being used by what I know I can use various tools to view running process's what TCP\UDP ports they are using and even see sessions they have open over the network. Is there any way I can see how much bandwidth is being used or traffic being generated by these process's. I have to show how much bandwidth a particular service running on my Windows server is genertaing. Thanks. Tag: Encrypt a folder Tag: 112261
  - 13
    - 2003 backup error Prepping to install 2003 sp2. I attempt to backup the server config using Windows Backup. An error is displayed: This is from the event log: Volume Shadow Copy Service error: Shadow Copy writer RemovableStorageManager called routine OpenNtmsSessionW which failed with status 0x80070422 (converted to 0x800423f4). This error can be caused by SQL being on the machine. I request the hotfix from MS for this issue. I am attempting to install the update. This messages is displayed: Before you install this update, we recommend that you: - Back up your system. Round and round we go. Now what? J Tag: Encrypt a folder Tag: 112258
  - 14
    - Configuring Local Exchange POP3 / Dns Problems I am using Windows 2003 Enterprise which is overkill but we are running a specialized application that will not run on Windows Server small business. I have installed Exchange 2003 and plan to use iGetmail. My problem lies that I have evidently configured something wrong with DNS. My server name is topdog and my domain name is the same to which I will be receiving email. Now when I go to my server and attempt to use it, it doesnt recognize it as an internet address and comes back with a reply from its local address 192.168.1.101. Therefore when I configure the iGetmail program it doesn't recognize my mail server. This is probably over kill for a small office, but something I want to do and have some shared mailboxes, etc. Any assistance would be appreciated. Thanks. Tag: Encrypt a folder Tag: 112256
  - 15
    - Can Diskpart v6 be used with XP and 2003? Server 2008 and Windows Vista both ship with v6.0 of diskpart, which adds the ability to shrink disk partitions. Does anyone know if that version can be safely run under Server 2003 and Windows XP? Thanks, BJ Tag: Encrypt a folder Tag: 112253
  - 16
    - could not start the Windows Firewall/Internet Connection Sharing When I try to start the Windows Firewall/Internet Connection Sharing the following error appears: Could not start the Windows Firewall/Internet Connection Sharing (ICS) service on Local computer. Error 170: The requested resource is in use. Routing and Remote Access has not been started. I did have a anti-virus software but it was removed. Tag: Encrypt a folder Tag: 112252
  - 17
    - Rights to run Server Manager from client? When we ran a Windows 2000 domain, I could appoint a certain number of selected staff members as "Server Operators". This enabled them to use Server Manager to disconnect sessions for students who had not logged off properly. Since we moved to Windows 2003-R2 (SP2) such a staff member can open Server Manager and when he/she clicks on a Domain Controller, he/she can control sessions. However when clicking on a Member Server, the message "Access is denied" is displayed As administrator equivalent I can get into both DC and Member server. It just affects "Server Operators". Client computers are Windows XP SP2. The server manager executable is V5.2.3790.1127. In all cases, SVRMGR.EXE is kicked off from the server share, not workstation (ie. \ \server02\reskit\srvmgr.exe) Is there some sort of security setting that I need to check on the Member server? Thanks Peter Tag: Encrypt a folder Tag: 112250
  - 18
    - Pemission on Files/Folders Using a command line tool such as XCACLS.exe, XCACLS.vbs, SetACL or a similar tool, can we change the permissions so one user/group can only list files but not read them (to see how big the files are)...Effectively, list on all folders and contents but no read access...Is that possible perhaps with a combination of allow/revoke? Tag: Encrypt a folder Tag: 112247
  - 19
    - Access Denied to COM Security using Admin Account Hello, I was hardening the security of my windows server and i read the document about MSDTC that if you don't need it then disable. And this is exactly what I did. I stopped and disabled MSDTC service. And then i removed Anonymous Logon & Everyone permisson (Local Access & Remote Access) under component service for COM security. I restarted the server, logged in as Administrator and got access denied to most of the tasks such as creating users or adding users to group. The worst thing is that i can't even Right-Click on any object to check the properties. I tried to bring back the permission on the COM security but failed as Iâ??m getting access denied though Iâ??m logged in as administrator. Tried to restart MSDTC service but unsuccessful because i can't even right-Click on it. The event log is showing the following error. I can't read the detail message since right-click is not working. so Iâ??m posting the basic errors. System Logs: LsaSrv --> Event ID 40960 Datascrn--> Event ID 3 Application Logs: SRMSVC--> Event ID 8203 USERENV--> Event ID 1110 USERENV--> Event ID1090 ccsetmgr--> Event ID 48 Event System--> Event ID 4609 COM+ --> Event ID 4691 Does any one know how can i reset the COM Security permission and restart the MSDTC service? Any suggestions will be appreciated. Thanks Tag: Encrypt a folder Tag: 112246
  - 20
    - Possible for Windows 2003 Server Std to automatically send an email every 5 minutes? I'm looking for a way to have my server generate and send an email every five minutes. Is this possible in Windows 2003 Server Std? -- Fight Usenet Spam!!! - http://improve-usenet.org:80/ Want a good newsgroup reader that will filter out GoogleGroups spam? Try MesNews - http://www.mesnews.net/gb/ If you want your posts to be seen, DON'T USE GOOGLE GROUPS! Tag: Encrypt a folder Tag: 112245
  - 21
    - How does Licensing Work I am curious about how the licensing works. I have a server that is running Windows Server 2003 and MSSql Server 2000. We have five user machines running XP. If I understand correctly, Win2003 and MSSql come with 5 Client licenses. What if I need to add another user? We don't use Active Directory are anything like that. We are only using the server to host the database that our application connects to. So, if I need to add a sixth user, do I need more licenses for Win 2003 AND MSSql? And what about Terminal Services? I am thinking maybe of moving our users over to Linux/Mac computers and having them access that one application via TS. How does that work in regards to licenses? And do I really need to setup another Windows 2003 machine to host the TS License Server????? Thanks. Griff Tag: Encrypt a folder Tag: 112237
  - 22
    - Login Scripts - Win2k DC Hi I am running a Windows 2000 Domain Controller and have my users organised into Organisational Units in Active Directory. Could someone assist me with creating a login script that maps network drives to the differing OUs. Thanks Tag: Encrypt a folder Tag: 112224
  - 23
    - Do I need a WINS server in a XP, W2K3 DC network? Hi all, We have migrated our network from NT4 to W2K and recently to W2K3 Servers Active Directory and at each step I ask myself: Do we really need a WINS server at all? It is supposed the DNS server does the work. Nowadays our network is comprised of XPs, a few W98 PCs which will be replaced in the next weeks, a few W2K servers (non DC) and W2K3 DC servers. The AD was raised to W2K3 level. Do I really need a WINS server? Thanks in advance Sammy Tag: Encrypt a folder Tag: 112223
  - 24
    - System Restore Hello, I'm trying to figure out what I have to back up on a routine basis so that I would be able to restore a server from the ground up if that server crashed. I assume that system state is one of the many things. However what does system state include? Any help in this area would be greatly appreciated! Tag: Encrypt a folder Tag: 112218
  - 25
    - VSS Catastrophic Failures Hi, Server 2003 R2 x64 SP2, Exchange Server 2007 SP1. KB940349 has been applied and resolved issues with our JetDB writers. We're having problems getting VSS to take snapshots for Shadow Copies and backups. It is now specific to the Exchange VSS Writer. We had BackupExec 12 installed and couldn't do an Exchange backup without having catasrophic errors. I have since switched to ArcServe 11.5 SP3 and the last Exchange backup went successfully. ShadowCopy snapshots however are still failing. After a clean reboot of the server, I can manually take a shadow copy snapshot and it completes successfully. I took one last night before the backup without issue. This morning I checked and the 7am scheduled snapshot didn't show up in the list. I checked the status of the VSS writers, and they're all Online with a normal status. The following errors were logged in the App log. -------------------------------------------- Event Type: Error Event Source: VSS Event Category: None Event ID: 12289 Date: 4/30/2008 Time: 7:02:32 AM User: N/A Computer: SERVER Description: Volume Shadow Copy Service error: Unexpected error WaitForMultipleObjects(1,000000000032A2B0,1,120000) == 0x00000102. hr = 0x8000ffff. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 2d 20 43 6f 64 65 3a 20 - Code: 0008: 43 4f 52 4c 4f 56 4c 43 CORLOVLC 0010: 30 30 30 30 30 36 39 34 00000694 0018: 2d 20 43 61 6c 6c 3a 20 - Call: 0020: 43 4f 52 4c 4f 56 4c 43 CORLOVLC 0028: 30 30 30 30 30 35 39 39 00000599 0030: 2d 20 50 49 44 3a 20 20 - PID: 0038: 30 30 30 30 37 39 36 30 00007960 0040: 2d 20 54 49 44 3a 20 20 - TID: 0048: 30 30 30 30 36 35 33 36 00006536 0050: 2d 20 43 4d 44 3a 20 20 - CMD: 0058: 43 3a 5c 57 49 4e 44 4f C:\WINDO 0060: 57 53 5c 53 79 73 74 65 WS\Syste 0068: 6d 33 32 5c 76 73 73 76 m32\vssv 0070: 63 2e 65 78 65 20 20 20 c.exe 0078: 2d 20 55 73 65 72 3a 20 - User: 0080: 4e 54 20 41 55 54 48 4f NT AUTHO 0088: 52 49 54 59 5c 53 59 53 RITY\SYS 0090: 54 45 4d 20 20 20 20 20 TEM 0098: 2d 20 53 69 64 3a 20 20 - Sid: 00a0: 53 2d 31 2d 35 2d 31 38 S-1-5-18 00a8: 2d 20 45 72 72 6f 72 3a - Error: 00b0: 57 61 69 74 46 6f 72 4d WaitForM 00b8: 75 6c 74 69 70 6c 65 4f ultipleO 00c0: 62 6a 65 63 74 73 28 31 bjects(1 00c8: 2c 30 30 30 30 30 30 30 ,0000000 00d0: 30 30 30 33 32 41 32 42 00032A2B 00d8: 30 2c 31 2c 31 32 30 30 0,1,1200 00e0: 30 30 29 20 3d 3d 20 30 00) == 0 00e8: 78 30 30 30 30 30 31 30 x0000010 00f0: 32 20 20 20 20 20 20 20 2 ------------------------------------------------------ Event Type: Warning Event Source: MSExchange EdgeSync Event Category: Topology Event ID: 1026 Date: 4/30/2008 Time: 7:10:06 AM User: N/A Computer: SERVER Description: Topology load generated transient exception Active Directory operation failed on server.hagelaw.local. This error could have been caused by user input or by the Active Directory server being unavailable. Please retry at a later time. Additional information: Active directory response: The operation was aborted because the client side timeout limit was exceeded. .. EdgeSync must be able to acquire current Exchange topology data from the Active Directory directory service to properly operate. The Edge Transport server will attempt to load the topology again. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. ----------------------------------------------------------------- Event Type: Error Event Source: MSExchange ADAccess Event Category: General Event ID: 2604 Date: 4/30/2008 Time: 7:12:07 AM User: N/A Computer: SERVER Description: Process MSEXCHANGEADTOPOLOGY (PID=2500). When updating security for a remote procedure call (RPC) access for the Exchange Active Directory Topology service, Exchange could not retrieve the security descriptor for Exchange server object SERVER - Error code=80040955. The Exchange Active Directory Topology service will continue with limited permissions. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. ------------------------------------------------------------------------- Event Type: Error Event Source: MSExchange System Attendant Mailbox Event Category: General Event ID: 4001 Date: 4/30/2008 Time: 7:15:35 AM User: N/A Computer: SERVER Description: A transient failure has occurred. The problem may resolve itself in awhile. The service will retry in 56 seconds. Diagnostic information: Active Directory operation failed on server.hagelaw.local. This error could have been caused by user input or by the Active Directory server being unavailable. Please retry at a later time. Additional information: Active directory response: The operation was aborted because the client side timeout limit was exceeded. . Microsoft.Exchange.Data.Directory.ADPossibleOperationException: Active Directory operation failed on server.hagelaw.local. This error could have been caused by user input or by the Active Directory server being unavailable. Please retry at a later time. Additional information: Active directory response: The operation was aborted because the client side timeout limit was exceeded. . ---> System.DirectoryServices.Protocols.LdapException: The operation was aborted because the client side timeout limit was exceeded. at System.DirectoryServices.Protocols.LdapConnection.ConstructResponse(Int32 messageId, LdapOperation operation, ResultAll resultType, TimeSpan requestTimeOut, Boolean exceptionOnTimeOut) at System.DirectoryServices.Protocols.LdapConnection.SendRequest(DirectoryRequest request, TimeSpan requestTimeout) at Microsoft.Exchange.Data.Directory.PooledLdapConnection.SendRequest(DirectoryRequest request, LdapOperation ldapOperation) at Microsoft.Exchange.Data.Directory.ADSession.Find(ADObjectId rootId, String optionalBaseDN, ADObjectId readId, QueryScope scope, QueryFilter filter, SortBy sortBy, Int32 maxResults, IEnumerable`1 properties, CreateObjectDelegate objectCreator, CreateObjectsDelegate arrayCreator) --- End of inner exception stack trace --- at Microsoft.Exchange.Data.Directory.ADSession.AnalyzeDirectoryError(PooledLdapConnection connection, DirectoryRequest request, DirectoryException de, Int32 totalRetries, Int32 retriesOnServer) at Microsoft.Exchange.Data.Directory.ADSession.Find(ADObjectId rootId, String optionalBaseDN, ADObjectId readId, QueryScope scope, QueryFilter filter, SortBy sortBy, Int32 maxResults, IEnumerable`1 properties, CreateObjectDelegate objectCreator, CreateObjectsDelegate arrayCreator) at Microsoft.Exchange.Data.Directory.ADSession.Find(ADObjectId rootId, QueryScope scope, QueryFilter filter, SortBy sortBy, Int32 maxResults, IEnumerable`1 properties, CreateObjectDelegate objectCtor, CreateObjectsDelegate arrayCtor) at Microsoft.Exchange.Data.Directory.ADSession.Find[TResult](ADObjectId rootId, QueryScope scope, QueryFilter filter, SortBy sortBy, Int32 maxResults, IEnumerable`1 properties) at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.Find[TResult](ADObjectId rootId, QueryScope scope, QueryFilter filter, SortBy sortBy, Int32 maxResults) at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.FindServerByFqdn(String serverFqdn) at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.FindLocalServer() at Microsoft.Exchange.Servicelets.SystemAttendantMailbox.Servicelet.Work() For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. --------------------------------------------------------------------------- Event Type: Error Event Source: VSS Event Category: None Event ID: 7001 Date: 4/30/2008 Time: 7:15:35 AM User: N/A Computer: SERVER Description: VssAdmin: Unable to create a shadow copy: Catastrophic failure Command-line: 'C:\WINDOWS\system32\vssadmin.exe Create Shadow /AutoRetry=5 /For=\\?\Volume{f2440b14-f04b-11dc-8efa-806e6f6e6963}\'. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 2d 20 43 6f 64 65 3a 20 - Code: 0008: 41 44 4d 56 41 44 4d 43 ADMVADMC 0010: 30 30 30 30 30 38 33 37 00000837 0018: 2d 20 43 61 6c 6c 3a 20 - Call: 0020: 41 44 4d 56 41 44 4d 43 ADMVADMC 0028: 30 30 30 30 30 37 36 38 00000768 0030: 2d 20 50 49 44 3a 20 20 - PID: 0038: 30 30 30 30 36 37 31 36 00006716 0040: 2d 20 54 49 44 3a 20 20 - TID: 0048: 30 30 30 30 36 39 38 30 00006980 0050: 2d 20 43 4d 44 3a 20 20 - CMD: 0058: 43 3a 5c 57 49 4e 44 4f C:\WINDO 0060: 57 53 5c 73 79 73 74 65 WS\syste 0068: 6d 33 32 5c 76 73 73 61 m32\vssa 0070: 64 6d 69 6e 2e 65 78 65 dmin.exe 0078: 20 43 72 65 61 74 65 20 Create 0080: 53 68 61 64 6f 77 20 2f Shadow / 0088: 41 75 74 6f 52 65 74 72 AutoRetr 0090: 79 3d 35 20 2f 46 6f 72 y=5 /For 0098: 3d 5c 5c 3f 5c 56 6f 6c =\\?\Vol 00a0: 75 6d 65 7b 66 32 34 34 ume{f244 00a8: 30 62 31 34 2d 66 30 34 0b14-f04 00b0: 62 2d 31 31 64 63 2d 38 b-11dc-8 00b8: 65 66 61 2d 38 30 36 65 efa-806e 00c0: 36 66 36 65 36 39 36 33 6f6e6963 00c8: 7d 5c 20 20 20 20 20 20 }\ 00d0: 2d 20 55 73 65 72 3a 20 - User: 00d8: 4e 54 20 41 55 54 48 4f NT AUTHO 00e0: 52 49 54 59 5c 53 59 53 RITY\SYS 00e8: 54 45 4d 20 20 20 20 20 TEM 00f0: 2d 20 53 69 64 3a 20 20 - Sid: 00f8: 53 2d 31 2d 35 2d 31 38 S-1-5-18 ---------------------------------------------------------------- After this string of events, event logs return to normal. This is the same string of events that are logged after every failed snapshot. After a failed snapshot, I checked the writer status and they're all normal. None say failed. Any ideas on what to do? Thanks. Tag: Encrypt a folder Tag: 112216
- Next
  - 1
    - 3TB Raid, one 2048GB partition, will not let me create a 900GB one? Hi there. A year ago or so we built this monster server for files with a RAID-5 array it has just about 3TB of disk in it total. I just noticed today in Disk Management that we actually only partitioned 2048GB of it (I guess the limit for a single filesystem?) and that there is almost a 900GB 'unallocated space' block sitting there unused. Windows will not allow me to create an additional partition in that 900GB space. Any advice? -Drew Tag: Encrypt a folder Tag: 112213
  - 2
    - important case study for a client i have a client with 1 main branch and 6 other branches. on the main branch he has: windows server, AD, exchange, ISA, SQL on the branches he has: windows server, AD, ISA just lately he has installed a WAN connection between all branches, what he wants now is: 1- let all branches receive internet through main branch only. 2- make all branches connected to the exchange in the main branch. 3- create isa array between sites. 4- all branches should be controlled, managed and monitored from the main server. what do you recommand to solve this problem? what do i need to do ? some branches has more than 76 computers, so i can't start everything from zero. thanks in advance Sensay Tag: Encrypt a folder Tag: 112209
  - 3
    - Upgrade server 2003 hardware I need to upgrade the lone server, running AD, DNS and DHCP, in the domain to a completely new box. I would like to do it a seemlesly as possible and wanted input regarding suggested steps for doing the migration and any pitfalls I should avoid. Is it as simple as installing Server 2003, making the device a member server, synchronizing the AD and DHCP, demoting the old server, promoting the new server and then copying the file structure? Any help will be greatly appreciated. Dave Tag: Encrypt a folder Tag: 112201
  - 4
    - Modify registry via Group Policy I want to modify the registry (HK_Current_User) on my WinXP clients to use a specific font in Outlook. I think the best way to do the modifcation is in GP. Where in GP do I configure to deliver the registry modification? I have found several places that seem like it could be done. Of the ones I have tested so far, none of them work. I have windows 2003 servers. Tag: Encrypt a folder Tag: 112200
  - 5
    - AD Site Links - What Ports? Hi, Soon we are setting up a remote office. I have played around with Site Links on the internal network, and also currently use it live for DFS File Servers, and setting their priority (Primary and Redundant etc.) via Site costing. But I have never used this for external site linking. What ports are required on the ADSL modems to allow connectivity with each server? We are not creating any new domains, just adding a additional domain controller in the new office then linking it. Thanks in advance. -- Chris White United Kingdom Tag: Encrypt a folder Tag: 112193
  - 6
    - Shared Fax Cover Sheet We have updated our shared fax coversheet, and searched for all .cov files located on our Windows 2003 server, however when ever a user goes to send a fax it is still pulling up the old fax cover sheet. How can we get the coversheet updated for all users? Thanks, William --------------= Posted using GrabIt =---------------- ------= Binary Usenet downloading made easy =--------- -= Get GrabIt for free from http://www.shemes.com/ =- Tag: Encrypt a folder Tag: 112185
  - 7
    - Language pack for Windows 2003 Server's Hi, I am curious to know whether the language packs comes by default in Windows or is there any additional package or license to be purchased. I am rounding up the search engines and not able to get clear information over this. Thanks in Advance Tag: Encrypt a folder Tag: 112183
  - 8
    - set up used 2003 server on new network? I'm installing a used 2003 server for a totally new domain, and I'd prefer not to have to do a full reinstall of 2003. Obviously I don't care about losing any AD or Exchange settings, so is there a simple way I can do this? Do I just uninstall & reinstall AD? Tag: Encrypt a folder Tag: 112181
  - 9
    - Print Server Issue I have an odd issue. I have a Windows 2003 server I am using as a small print server. When I connect to it using \\server and then choose Printers and Faxes the window hangs for several minutes then finally populates. I do not have any issues printing from it just connecting to it remotely. Any idea what could be causing this? Thanks for any help. -- kman ------------------------------------------------------------------------ kman's Profile: http://forums.techarena.in/member.php?userid=47723 View this thread: http://forums.techarena.in/showthread.php?t=959184 http://forums.techarena.in Tag: Encrypt a folder Tag: 112174
  - 10
    - KMS - Does it require Non-virtual 08 Servers to count towards the Does the KMS service only count non-virtual machines running Server 2008 towards the initial 5? I am trying to roll out 08 Std and am running into problems with getting my count # to go up. I think I have narrowed it down to actual servers vs virtual machines. I have done 7 upgrades with 3 being actual and that is the number the KMS Server is showing as its current count: 3. I figured that it would be 7 by now, but its not. I didn't see it anywhere that says specifically that the count is only on real servers... Tag: Encrypt a folder Tag: 112169
  - 11
    - Windows 2008 FTPS Virtual Directory Good Day, I am trying to setup a ssl ftp site for secure communication to our bank. My initial setup was to a local directory and that worked fine, However, for the production environment I need to utilize a virtual directory on another server. I setup a file share on the destination server to recieve the files and gave permissions to the folder to my ftp client. I set the authentication to the directory to the specified users (from pass though auth) When I test the mapping and permissions everything appears to be fine. When I try to connect however, I get "530 User cannot log in, home directory inaccessible" I could really use some assistance in troubleshooting this issue. Thanks -- Steve Tag: Encrypt a folder Tag: 112167
  - 12
    - XP sp3 msi through GP is there a way to push XP sp3 from a 2003 server? Tag: Encrypt a folder Tag: 112162
  - 13
    - Domain server in a unique server Why is it recommend to separate the domain server from the other applications?? Performance??? Tag: Encrypt a folder Tag: 112160
  - 14
    - Operating System Chip I think it is a good idea to develop operating system on the electronic chip this idea will - solve historical error in building the PC computer and it will Limit the illegal copying of the operating system . - reduce the danger of viruses that strike operating systems and reduce the time needed to load the operating system . To clarify my idea in detail We should take these things in mind - operating system is part from computer - We can divide the operating system (the basics of data, identification data and update information) - There is no important reason to booting computer from Hard Disk. Now what are the new idea ? - Idea is to develop a system operating on the electronic segment, such as USB Flash or PCI segment or any other electronic slide - And this Chip is divided into two parts or more exists in the first section main programmes and basic data in the operating system in Section II identification data and any updating in the operating system - The computer will be boot from this Chip (first part is for readers only) - The operating system will use existing data in the second part could also use part from hard disk - In the end there will be no way to use illegal copies of the operating system only produces segments of the operating system and this will not only available For large companies. And when it can pursue this companies - It will also reduce the risk of viruses ----- I hope that the my suggestion is good also i hope that Microsoft examine carefully the my suggestion ... In the end I hope vote for this proposal I hope to benefit from . Thanks for all......... Signature .. Ahmed Fathy Alsharawy ( Egypt ) ---------------- This post is a suggestion for Microsoft, and Microsoft responds to the suggestions with the most votes. To vote for this suggestion, click the "I Agree" button in the message pane. If you do not see the button, follow this link to open the suggestion in the Microsoft Web-based Newsreader and then click "I Agree" in the message pane. http://www.microsoft.com/communities/newsgroups/list/en-us/default.aspx?mid=7521be35-4b86-4076-be01-b5f7da4a9a5a&dg=microsoft.public.windows.server.general Tag: Encrypt a folder Tag: 112159
  - 15
    - NTPClient on DC fails to contact time source (W2K3 R2 64-bit) Our W2K3 R2 64-bit DC has been up and running for some time, and getting time updates regularly. Last week, it started a spate of failed attempts which have become rather chronic. First, I followed advice to set the time source: w32tm /config /manualpeerlist:time.nist.gov,0x8 /syncfromflags:MANUAL net stop w32time net start w32time w32tm /resync Had no luck. I verified that TCP & UDP ports 123 were available to the server and tested successfully with: w32tm /monitor /computers:time.nist.gov I also re-registered the service with: net stop w32time w32tm /unregister w32tm /register net start w32time Also to no avail. I did find a hotfix related (830092), but it appears it is only for the 32-bit version. Anything else I can try? Tag: Encrypt a folder Tag: 112156
  - 16
    - SBS Server 2003 Random Freezes We have a Dell Poweredge 2900 server running SBS Server 2003. Randomly client computers will freeze for a few seconds (3-10) when doing anything from opening a program, to trying to open a file in Excel. Anything that requires the network. Dell has replaced the motherboard twice and all the ram with no solution. What would you suggest to look at next? There are no errors in the event log. Tag: Encrypt a folder Tag: 112148
  - 17
    - how to generate a daily report for logon/logoff time? I need a report to show users' logon/logoff time each day. I need this for one office now. The users are under a few different OUs, due to GPO. How can I do that? GUI or script? Thanks. Tag: Encrypt a folder Tag: 112146
  - 18
    - View all folders unchecked for "allow inheritable permissions" I need to pull a listing of all folders on a file server that has the "Allow inheritable permissions from parent to propagate to this object" check box cleared. Does anyone have any suggestions? Thanks! Tag: Encrypt a folder Tag: 112143
  - 19
    - is there a newer version of srvinstw.exe for Win2k3? The Srvinstw.exe tool is the graphical user interface (GUI) version used to create remote services. I got it from Windows 2000 resource kit. Just wondering if there is a newer version or replacement for win2k3? Thanks. Tag: Encrypt a folder Tag: 112141
  - 20
    - Is it wrong to create security groups on mydomain/Computers container? Hi all, I'm creating security groups of computers to assign different domain level GPOs to each of them. In the past I created such groups in Active Directory Users and Computers in mydomain/Computers instead of mydomain/Users. In the past it looked to me more natural. But I always wondered why Microsoft creates groups of computers in mydomain/Users? For example in my W2K3 domain controller "RAS and IAS Servers" , "Domain Computers", "Domain Controllers" groups are created in mydomain/Users. Is it any problems with creating security groups in mydomain/Computers? Does not it works the same if they were created in mydomain/Users? Thanks in advance Sammy Tag: Encrypt a folder Tag: 112140
  - 21
    - Monitor if a port is being used Hi, is there a tool which allows be to monitor and log whether a port has been used on a Windows 2003 server? We have opened up a port on our remote firewall to a server and just want to log the access on this port. Our firewall can't do this :( Tag: Encrypt a folder Tag: 112139
  - 22
    - WSUS client stops talking to server On a 100 device NT4 domain - with a 2003 based WSUS 2 server talking to W2K clients. A few workstations just decided not to talk to the server any more. Their WSUS log has an entry saying 2008-04-29 14:13:34:226 1200 6e4 Misc WARNING: Error: 0x80092026 when verifying trust for C:\WINNT\SoftwareDistribution\SelfUpdate\Default\wuident.cab From that point on, even if I re-install the WSUS client it registeres with the server but then will not talk to it to find out what updates it needs. This affects approx 10% of my workstations, each at slightly different update stages, and I am at a loss on how to get these talking again. 50% plus of my devices have ALL updates downloaded the remaining 40% are nearly there and this 10% are miles away and doing nothing. The WSUS client diag program gives pass on all but three entries which are NONE (for winhttp local machine proxy and bypass proxy and autoconfig URL proxy) Anyone else seen this? I have done the usual, detcect now etc etc and deleted registry entries but nothing -- Dave B Tag: Encrypt a folder Tag: 112137
  - 23
    - CMOS (non-volatile harware) clock sycronisation I have a number of Windows member servers in an AD forrest and in steady state w32time keeps there clocks approximately right (+-200ms). However when they are rebooted their clocks are (for a short time) all over the place (for 10-30 minutes) because, it would appear, that nothng is keeping the CMOS (non-volatile harware) clock in sycronisation with the Windows clock. On Linux I'd just create a cron job to do "clock -uw" periodically but I can't find any equivalent on Windows. Please note: I'm asking how to get Windows to keep the *CMOS* clock synced so that when servers are rebooted their clocks start out *approximately* right *before* w32time manages to syncronise to a time server. Tag: Encrypt a folder Tag: 112136
  - 24
    - Adding Server 2008 DC to 2003 Domain New to server 2008. I have an existing 2003 domain with 2 DCs. Can I simply go thorough the 2008 setup with a new machine and make it a 3rd DC? Any special pre-installation steps? Also, what about adding it to a 2000 domain (with two DCs)? I know about "adprep" being required when upgrading from 2000 to 2003. But what about simply adding a 2008 DC to an existing 2000 domain? Advice, links appreciated. Thanks, Frank Tag: Encrypt a folder Tag: 112133
  - 25
    - Server 2008 x64 Fax Server with x32 XP Clients I have a 64 bit Windows Server 2008 Standard server configured with the fax server role. I can't seem to figure out how to add x32 drivers so I can "print" to the shared fax device on the server from my 32 bit XP clients. I can send a fax from the server without a problem. When I try to add the x32 drivers to the shared fax printer on the server, I'm prompted to "please provide a printer driver". I've tried pointing to 32 bit XP media, 64 bit Server 2008 media, tried loading the driver from an XP and Vista PC via the server share, but it doesn't accept any of these paths. From my XP PC, I can browse to the share on the server & connect the fax print device. It appears on my XP PC as "Fax on %servername%". I can open the fax console on my XP PC & see jobs that are in the outbox (submitted from the server). When I attempt to create a new fax from the XP fax console, I get an hourglass for a brief moment, and then nothing. If I try & print to the fax "print" driver from the XP PC, I get nothing. I believe with the x32 W2K3 fax server I worked with a wizard came up asking for the fax number, select a cover page, etc. I'm assuming this is because I don't have the x32 fax driver loaded on the server. Any ideas on how I can add this? Thanks in advance for your assistance. Tag: Encrypt a folder Tag: 112129

I have a temporary server which is in a high theft area and I would like to
encrypt the main folder, sub folders and files containing all of the company
data in anticipation that it will be stolen. Could somebody please explain
the basic steps to do this.

Thanks,

Michael

Top

Re: Encrypt a folder by Meinolf

Meinolf
Fri May 02 16:18:10 PDT 2008

Hello Michael,

What kind of server? Encryption is based on a user account, so how should
the server be used? Or you have to use 3rd party tools for encryption.

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

> I have a temporary server which is in a high theft area and I would
> like to encrypt the main folder, sub folders and files containing all
> of the company data in anticipation that it will be stolen. Could
> somebody please explain the basic steps to do this.
>
> Thanks,
>
> Michael
>

Top