Re: How to start from CD when system won't work by Mike
Mike
Mon Aug 16 13:53:39 CDT 2004
Theresa,
I'm not quite sure what you are hoping to achieve by booting from your Win
Me CD. If your bootdisk is dubious you can download the image of an OEM
Win Me bootdisk from www.bootdisk.com to your desktop (any desktop) and
then run the downloaded image to transfer a copy to a floppy which you can
then use with your Win Me PC.
Booting from a CD.
First it is necessary to set (or check) the boot order in the motherboard
bios to boot from your CD drive before attempting to boot from your hard
disk. Do this by rebooting your PC and immediately after starting and
before you see the POST (Power On Self Test screen) click the required key
to enter the bios. The specific key sequence is dependent upon the BIOS
vendor and/or PC manufacturer. Some common combinations include ....
F1
F2
Del
or less often,
Ctrl + Alt + Esc
Ctrl + Alt + Ins
Secondly, Microsoft Win Me CDs are not bootable although some of those
produced by OEM's are bootable.
--
Mike Maltby MS-MVP
mcmaltby@hotmail.com
Threasa <anonymous@discussions.microsoft.com> wrote:
> I am running ME and the system did not fully load before
> things shut down. My emergency boot disk won't read and I
> was hoping I could put the ME disk in the CD and start
> from there. How do I tell my computer to boot from the CD?