corrupted pages

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Communication Questions Q1. I have connected Headset to 56K Data/Fax/Voice modem. When I dial using Phone Dialer, I can hear the voice but the person I called can't hear my voice. What should I do? Q2. Can we share data between two computers connected via modem but using same telephone line? TIA Farhan Tag: corrupted pages Tag: 266283
  - 2
    - standby Hi, I am using a Dell Optiplex Gxa and have a problem using standby. If I chose standby the system goes to standby but starts again at once, I have tried to deactivate all software but it did not help. I am not using any USB device. Configuration: Dell Optiplex Gxa, 128MB Windows ME no addiional PCI card Similar happens if I want to put the hardddisk to sleep mode, it goes down but restarts at once. kind regards Franz Tag: corrupted pages Tag: 266274
  - 3
    - Critical update Q823559 I ran Belarc Advisor and found 3 items that needed to be reinstalled (upd323255, upd811630, & updq823559). No problem with the first two, but I can't get 823559 to install. I checked my installation history on windows update site and found that this particular item failed multiple times back in Aug & Sept 2003, but was finally successful on 9/17/03. The exe file is in WU folder, but it will not go thru with the installation. What could be the problem with this? Janice Tag: corrupted pages Tag: 266269
  - 4
    - can't disable system restore???? I have Adaware and Spybot and run them often. I also have a virus scanner. Problem seems to be virus/spyware/etc. in my "restore" folder, so they don't ever get really erased. When I try to turn off system restore to run the virus and spyware programs, it doesn't actually turn off. This is my personal computer and I am the original owner but apparently I am not the "administrator"???? Is there anyway to set myself up as the administrator so I can disable system restore temporarily to run these programs? Please help. Tag: corrupted pages Tag: 266268
  - 5
    - EARN $$$ SEARCHING THE NET IN GOOGLE(READ BODY) You want to gain much money? So do I!join with me then! That is thus,there is sites that pay for each research in google. This consists of making 40 research per $0,80 day and receiving cent. Or either, to the end of the month they make 25. If to join a friend, and if it to make the 40 research per day and the 25$ to the end of the month. Raisins to gain 50$ (25$ yours and 25$ of your friend). 1º - They have to arrange a paypal account, that is gratuitous, for where the owners of the sites order the money day 14 of each month. For this they visit http://www.paypal.com, sign up, personal account, are enrolled and they do not need for your credit card, becouse having account then gives to make the transference to your account (when to appear, this cancel and thats it ') I currently use 2 sites, I go to leave the sites here but they make the max to obtain $. After confirming the account in the paypal here, they are register: - http://netbux.org/?r=68890 (opens the site, and in low it has to register, are register and such, in the paypal email, put the mail that you have registered before in www.paypal.com. After making signup, go to have one link similar to the from above one but to different numbers. They use this link to make the research. They can control the $ has accumulated in low in button "Stats".) - http://pay-pup.com/?r=36073 (Same procedures from above) LETS GO TO MAKE SOME $$$! Follow these easy steps: 1) Sign up and register here:http://netbux.org/?r=68890 2) Login and begin searching on Google or your prefered search engine! 3) Do this everyday and tell your friends to make even more money! Do the same steps for pay-pup http://pay-pup.com/?r=36073 Note: Netbux works same way put you can earn 80 cents a day insted of $1.00 How Pay-Pup Works At Pay-Pup, we pay our members to search the internet. There are no strings or gimmicks. You simply register with Pay-Pup and you earn money instantly from your very first search. You will earn $0.02 for every search you make for up to 50 paid searches per day, therefore the maximum pay per day for your individual searching is $1.00. Note: A paid search is one that is unique to your other searches, meaning that you will not get paid for searching the same thing twice. To make things even better, you will also earn $0.02 for every search that your referrals make for up to 50 searches a day as well! Therefore the maximum pay per day for each referral is $1.00. The more referrals, the more money! Upon registration, you will be given a unique referral url (also located in your 'stats' area) that you can give out to your friends, post it on your website, blog, etc. We also have some images that you can use to help advertise online with. An amazing feature with the referral program is that if someone comes here by way of your referral url, their ip address is recorded and attached to your account so if they close the browser, disconnect (only static ip's), turn off their computer (only static ip's), you will still get credit if they ever return! You only get paid for one level of referrals but you may already see an enormous earning opportunity here. There really isn't much to it. You search the net and you earn money. You refer your friends and you'll earn even more money. Your member statistics are updated instantly so you can always stay on top of your earned monies, referrals, searches, etc. We pay you at the beginning of every month via PayPal once you have reached $50 or more. Tag: corrupted pages Tag: 266267
  - 6
    - EARN $$$ SEARCHING THE NET IN GOOGLE(READ BODY) You want to gain much money? So do I!join with me then! That is thus,there is sites that pay for each research in google. This consists of making 40 research per $0,80 day and receiving cent. Or either, to the end of the month they make 25. If to join a friend, and if it to make the 40 research per day and the 25$ to the end of the month. Raisins to gain 50$ (25$ yours and 25$ of your friend). 1º - They have to arrange a paypal account, that is gratuitous, for where the owners of the sites order the money day 14 of each month. For this they visit http://www.paypal.com, sign up, personal account, are enrolled and they do not need for your credit card, becouse having account then gives to make the transference to your account (when to appear, this cancel and thats it ') I currently use 2 sites, I go to leave the sites here but they make the max to obtain $. After confirming the account in the paypal here, they are register: - http://netbux.org/?r=68890 (opens the site, and in low it has to register, are register and such, in the paypal email, put the mail that you have registered before in www.paypal.com. After making signup, go to have one link similar to the from above one but to different numbers. They use this link to make the research. They can control the $ has accumulated in low in button "Stats".) - http://pay-pup.com/?r=36073 (Same procedures from above) LETS GO TO MAKE SOME $$$! Follow these easy steps: 1) Sign up and register here:http://netbux.org/?r=68890 2) Login and begin searching on Google or your prefered search engine! 3) Do this everyday and tell your friends to make even more money! Do the same steps for pay-pup http://pay-pup.com/?r=36073 Note: Netbux works same way put you can earn 80 cents a day insted of $1.00 How Pay-Pup Works At Pay-Pup, we pay our members to search the internet. There are no strings or gimmicks. You simply register with Pay-Pup and you earn money instantly from your very first search. You will earn $0.02 for every search you make for up to 50 paid searches per day, therefore the maximum pay per day for your individual searching is $1.00. Note: A paid search is one that is unique to your other searches, meaning that you will not get paid for searching the same thing twice. To make things even better, you will also earn $0.02 for every search that your referrals make for up to 50 searches a day as well! Therefore the maximum pay per day for each referral is $1.00. The more referrals, the more money! Upon registration, you will be given a unique referral url (also located in your 'stats' area) that you can give out to your friends, post it on your website, blog, etc. We also have some images that you can use to help advertise online with. An amazing feature with the referral program is that if someone comes here by way of your referral url, their ip address is recorded and attached to your account so if they close the browser, disconnect (only static ip's), turn off their computer (only static ip's), you will still get credit if they ever return! You only get paid for one level of referrals but you may already see an enormous earning opportunity here. There really isn't much to it. You search the net and you earn money. You refer your friends and you'll earn even more money. Your member statistics are updated instantly so you can always stay on top of your earned monies, referrals, searches, etc. We pay you at the beginning of every month via PayPal once you have reached $50 or more. Tag: corrupted pages Tag: 266266
  - 7
    - EARN $$$ SEARCHING THE NET IN GOOGLE(READ BODY) You want to gain much money? So do I!join with me then! That is thus,there is sites that pay for each research in google. This consists of making 40 research per $0,80 day and receiving cent. Or either, to the end of the month they make 25. If to join a friend, and if it to make the 40 research per day and the 25$ to the end of the month. Raisins to gain 50$ (25$ yours and 25$ of your friend). 1º - They have to arrange a paypal account, that is gratuitous, for where the owners of the sites order the money day 14 of each month. For this they visit http://www.paypal.com, sign up, personal account, are enrolled and they do not need for your credit card, becouse having account then gives to make the transference to your account (when to appear, this cancel and thats it ') I currently use 2 sites, I go to leave the sites here but they make the max to obtain $. After confirming the account in the paypal here, they are register: - http://netbux.org/?r=68890 (opens the site, and in low it has to register, are register and such, in the paypal email, put the mail that you have registered before in www.paypal.com. After making signup, go to have one link similar to the from above one but to different numbers. They use this link to make the research. They can control the $ has accumulated in low in button "Stats".) - http://pay-pup.com/?r=36073 (Same procedures from above) LETS GO TO MAKE SOME $$$! Follow these easy steps: 1) Sign up and register here:http://netbux.org/?r=68890 2) Login and begin searching on Google or your prefered search engine! 3) Do this everyday and tell your friends to make even more money! Do the same steps for pay-pup http://pay-pup.com/?r=36073 Note: Netbux works same way put you can earn 80 cents a day insted of $1.00 How Pay-Pup Works At Pay-Pup, we pay our members to search the internet. There are no strings or gimmicks. You simply register with Pay-Pup and you earn money instantly from your very first search. You will earn $0.02 for every search you make for up to 50 paid searches per day, therefore the maximum pay per day for your individual searching is $1.00. Note: A paid search is one that is unique to your other searches, meaning that you will not get paid for searching the same thing twice. To make things even better, you will also earn $0.02 for every search that your referrals make for up to 50 searches a day as well! Therefore the maximum pay per day for each referral is $1.00. The more referrals, the more money! Upon registration, you will be given a unique referral url (also located in your 'stats' area) that you can give out to your friends, post it on your website, blog, etc. We also have some images that you can use to help advertise online with. An amazing feature with the referral program is that if someone comes here by way of your referral url, their ip address is recorded and attached to your account so if they close the browser, disconnect (only static ip's), turn off their computer (only static ip's), you will still get credit if they ever return! You only get paid for one level of referrals but you may already see an enormous earning opportunity here. There really isn't much to it. You search the net and you earn money. You refer your friends and you'll earn even more money. Your member statistics are updated instantly so you can always stay on top of your earned monies, referrals, searches, etc. We pay you at the beginning of every month via PayPal once you have reached $50 or more. Tag: corrupted pages Tag: 266265
  - 8
    - EARN $$$ SEARCHING THE NET IN GOOGLE(READ BODY) You want to gain much money? So do I!join with me then! That is thus,there is sites that pay for each research in google. This consists of making 40 research per $0,80 day and receiving cent. Or either, to the end of the month they make 25. If to join a friend, and if it to make the 40 research per day and the 25$ to the end of the month. Raisins to gain 50$ (25$ yours and 25$ of your friend). 1º - They have to arrange a paypal account, that is gratuitous, for where the owners of the sites order the money day 14 of each month. For this they visit http://www.paypal.com, sign up, personal account, are enrolled and they do not need for your credit card, becouse having account then gives to make the transference to your account (when to appear, this cancel and thats it ') I currently use 2 sites, I go to leave the sites here but they make the max to obtain $. After confirming the account in the paypal here, they are register: - http://netbux.org/?r=68890 (opens the site, and in low it has to register, are register and such, in the paypal email, put the mail that you have registered before in www.paypal.com. After making signup, go to have one link similar to the from above one but to different numbers. They use this link to make the research. They can control the $ has accumulated in low in button "Stats".) - http://pay-pup.com/?r=36073 (Same procedures from above) LETS GO TO MAKE SOME $$$! Follow these easy steps: 1) Sign up and register here:http://netbux.org/?r=68890 2) Login and begin searching on Google or your prefered search engine! 3) Do this everyday and tell your friends to make even more money! Do the same steps for pay-pup http://pay-pup.com/?r=36073 Note: Netbux works same way put you can earn 80 cents a day insted of $1.00 How Pay-Pup Works At Pay-Pup, we pay our members to search the internet. There are no strings or gimmicks. You simply register with Pay-Pup and you earn money instantly from your very first search. You will earn $0.02 for every search you make for up to 50 paid searches per day, therefore the maximum pay per day for your individual searching is $1.00. Note: A paid search is one that is unique to your other searches, meaning that you will not get paid for searching the same thing twice. To make things even better, you will also earn $0.02 for every search that your referrals make for up to 50 searches a day as well! Therefore the maximum pay per day for each referral is $1.00. The more referrals, the more money! Upon registration, you will be given a unique referral url (also located in your 'stats' area) that you can give out to your friends, post it on your website, blog, etc. We also have some images that you can use to help advertise online with. An amazing feature with the referral program is that if someone comes here by way of your referral url, their ip address is recorded and attached to your account so if they close the browser, disconnect (only static ip's), turn off their computer (only static ip's), you will still get credit if they ever return! You only get paid for one level of referrals but you may already see an enormous earning opportunity here. There really isn't much to it. You search the net and you earn money. You refer your friends and you'll earn even more money. Your member statistics are updated instantly so you can always stay on top of your earned monies, referrals, searches, etc. We pay you at the beginning of every month via PayPal once you have reached $50 or more. Tag: corrupted pages Tag: 266264
  - 9
    - System error Hi. Since a few days a lot of applications are showing some error regarding kernel32.dll that so and so program caused an error in that dll.Is it possible to replace kernel32.dll? Audio programs like winamp and real are unable to play mp3's and others stating the absence of an audio device when actually there's one.Please also tell me what kind of operations cause these kind of problems. Thanking you and earnestly waiting for your reply!!!!! Tag: corrupted pages Tag: 266259
  - 10
    - MSIMN Error Msimn has caused an error in SHLWAPI.DLL. This probably was discussed before, but I need a refresher course. What is the cause of this error and how to fix? Appreciate any thoughts. Harry. Tag: corrupted pages Tag: 266214
  - 11
    - Networking Me and XP Hi all, The ol' Me box is now hooked to a Linksys BEFSR41 wired router to my cable modem, along with the new XP box. I have a new Lexmark P6250 printer directly connected to the Me box. Question: Is there a way to share files and printer between the two boxes without opening myself to the 'wilds' of the Net?? I have tried a number of things, to include the Networking Wizard in Me and XP. Me tells me that the networking will work with a Win95 or Win98 box and the XP Wizard warns me that opening file and printer sharing will allow the world to get into my computer/printer. Is this true, since I am behind the router?? Also, I am no longer getting auto System Restore points. I have checked for the presence of a <wininit.ini> file and reset System Restore. It did create a point upon rebooting, but, nothing since I did this two days ago. ZAPro was updated to version 5.5.094.000 about the same time the router and new printer was installed.....may have done too much, too fast, too soon. Heirloom, old and sorry about two topics in one post Tag: corrupted pages Tag: 266204
  - 12
    - HijackThis Latest version of Hijackthis stops/hangs while scanning. using ctrl+alt+del key stops it. what goes wrong? Not working in sage mode either. Farhan Tag: corrupted pages Tag: 266199
  - 13
    - ScanDisk and Bad Sectors After reformatting my HD and reinstalling WinMe with updates I ran ScanDisk. It would not run in the Normal Mode (after many hours it rpoerted that it tried 10 times but something started writing to the drive, according to the message). I then ran in in Safe Mode with a check mark for repairing errors--took well over 24 hours--and it gave me a mystifying report. If says it found no errors. It reported in round numbers 78,000,000 KB total disk space (I have an 80 GB disk) and 8,600,520 bytes in "bad sectors." What does this mean? Is my HD shot? Do I have to fix something? Call Dell? Could this explain why I was having so much trouble in the first place (OK, that is too open-ended) Tag: corrupted pages Tag: 266182
  - 14
    - Windows Update kills Roxio? I just tried to use my Roxio software to burn a CD. First time I've used it in a month or so. Upon starting Creator Classic I got: Microsoft Visual C++ Runtime Library Runtime Error! Program: ...LES\ROXIO\EASY CD CREATOR 6\EASY CD CREATOR\CREATORC.EXE abnormal program termination followed by: Creatorc Creatorc has caused an error in CREATOR.DLL Creatorc will now close. If you continue to experience problems, try restarting your computer. Of course, restarting doesn't help. But upon tracking down CREATOR.DLL I found files by that name in both: C:\Program Files\Adaptec Shared\CreatorAPI\ C:\Program Files\Roxio Shared\CreatorAPI\ The ones in "Adaptec Shared" dated 04\30\05, those in Roxio Shared dated (mostly) 11/26/04. When I saved the ones in "Adaptec Shared" and replaced them with those in "Roxio Shared" the program now starts and runs, though I get the second error above upon exit. Since I haven't run the Roxio update utility for months, I'm assuming the ones in Adaptec Shared came in via Windows Update or, perhaps, when I updated Media Player to version 9. The question is, has anyone else experienced this failure, and do you have a more reasonable, or maybe more complete, way around it than what I've done? I did save the 04/30/05 files, so I can put them back. - Bill Tag: corrupted pages Tag: 266142
  - 15
    - Interesting article I don't know how many of you saw this so I thought I'd post the link here, saw it in the XP ng's this morning. http://www.microsoft.com/presspass/features/2005/may05/05-02YoungMCP.asp Joan Tag: corrupted pages Tag: 266132
  - 16
    - Recycle bin is missing Hi. I recently turned on my computer and found that the windows Me recycle bin shortcut icon was gone from the desktop. I did a search of files and folders for recycle bin and found nothing. I looked in the windows directory and could not find a folder marked recycle bin. I clicked on properties for the desktop and went to effects,highlited recycle bin full, then clicked on default still no shortcut on the desktop. I tried the same for the recycle bin empty...nothing. How do I find the short cut icon ? If it has been deleted how do I re install it? Is this a common glitch with Me? I didn't think windows would allow the shortcut for Recycle bin to be deleted. But mine sure is gone. Thanks, Dave Ohler Tag: corrupted pages Tag: 266130
  - 17
    - MSDOS.SYS file missing I'm using MS article Q258471 to troubleshoot a boot problem. The computer only boots into DOS mode, and only if I use a system startup disk. (I get an "Error while initializing device IFSMGR" screen when I boot into Windows.) However, I can't find an msdos.sys file anywhere on the disk, including the %RootDir%. I have a second WinMe computer that doesn't have an msdos.sys file either, all though that system boots fine. I read that msdos.sys is created during the Windows installation process. What would cause the msdos.sys file to be missing from both of my WinME systems? And, if it's necessary to boot into Windows, why does one of my computes boot without it? Can an msdos.sys file be created manually? If so, how? Is there some way to retrieve a copy from somewhere else, or extract it from the installation disk? Tag: corrupted pages Tag: 266125
  - 18
    - missing components in Windows Setup I've noticed when in the "windows setup" from the add\remove section that there are no components(empty) listed at all. I do get an error message stating "Rundll32 has caused an error in setupx.dll". What could have caused this, and how do I get these entries back? I have tried a varldid.reg installation and have also tried a system restore to no avail. Tag: corrupted pages Tag: 266116
  - 19
    - Test access This is a test post - new email program Tag: corrupted pages Tag: 266114
  - 20
    - spool32 error I've looked at other methods to fix this, but they don't seem to apply or work. First off, I installed a new HP printer and shortly after that I would get error messages such as: Spool32 has caused an error in KERNEL.dll or Spool32 has caused an error in <unknown>. I uninstalled my old printers drivers, didn't help. Booted up in safe mood/clean boot and even then I would often get the spool32 error box to show up. I went into my spool folder and found nothing in the PRINTERS folder. I cleaned out the TEMP folder. Still getting the same error on startup. I can't print if I close the error box that shows up on startup. The error box shows up when I want to open my Printers folder in my Control Panel. I've tried printing directly to the printer. I've ran out or tried just about all the possible solutions I have seen. The error box shows up everytime I boot and am ready to use my PC. Thanks in advance for your help. Tag: corrupted pages Tag: 266111
  - 21
    - Comm port invalid or busy HELP! I've tried almost everything listed on these message boards to resolve my comm port problem. I have Windows XP. AOL 9.0. I use my modem for dial-up when away from home. It runs (or used to) on comm port 3. I use broadband at home. Until last week, both dial-up and broadband worked fine. Then, all of a sudden, I couldn't dial-out anymore...receiving the dreaded message "com port invalid or busy". I haven't added new hardware or software. Broadband still works fine. I've checked all my devices for conflicts and/or problems. All are fine. I've uninstalled the Toshiba modem, and reinstalled. Modem diagnostics say it's working fine. Changed serialkey settings. Didn't help. I've deleted, changed, updated the AOL Adapter. I'm ready to throw this laptop out the window!! Anybody have ideas for resolution? Tag: corrupted pages Tag: 266090
  - 22
    - Scandisk/defragmentation I did a scan disk in safe mode and it seems to stop 1/4 mark, so I decided I will do deframentration then, Initially, the defragmentation process is ok until it give this error message "Window cannot defrag this drive bcos it cannot access part of drive. To repair your drive, click scandisk (choose thorough option) and try defragmentation again. ID# Defrag005" So I try to do the scasndisk and it would even start. So I power off the button and restart. Since it did not shut down the proper manner, it usually try to scan the disk which it again did not start and give this message" Msgsrv32 has caused an error in KRNL.386.exe. Msgsrv32 will now close. If you continue to experience the problem, try restarting your pc." Hdd Masxtor 40 gb, model 34098H4. Any idea what can I do, dont tell me that the hdd is gone///// Tag: corrupted pages Tag: 266089
  - 23
    - SpywareBlaster Update (May 02) New one which adds 20 more to the program. Just update from within it. Cheers......Heather Tag: corrupted pages Tag: 266084
  - 24
    - wi32.exe I have a file wi32.exe in my startup list, What is this? Is it save to have there? Farhan Tag: corrupted pages Tag: 266082
  - 25
    - ie6 losing custom shortcuts I re-downloaded/reinstalled ie6, turned on 'inline autocomplete' option like somebody suggested, but ie6 still loses all my custom key shortcuts (ctl-alt-whatever) when the pc is rebooted. Any ideas? thanks Tag: corrupted pages Tag: 266059
- Next
  - 1
    - microtrend-page cannot be display properly This Millinnium pc has never been updated before, Thought doi an on line scan first and when I try to download the housecall definitions, its says the page cannot be display properly because of the setting. the is a cross in a small box on the page. Any idea whats is missing. I have set the IE security setting to default but it does not help. Now decided to Windows update first and there is no problem. Any idea how to get the housecall display properly, thanks Tag: corrupted pages Tag: 266057
  - 2
    - Desktop has gone black I don't know if this was caused by a virus or not but my wallpaper has gone and my desktop is completely black. It still has icons and they work. When I right click on the desktop I no longer get the popup menu I used to get. I get a simple one allowing me to select a screensaver and size settings. I cannot select wallpaper and my active desktop options are gone. Does anyone know what files might be corrupt and need replacing? Any other ideas would be appreciated. Tag: corrupted pages Tag: 266008
  - 3
    - Problem with Floppy drive I'm having a problem my A:\ or my floppy drive. I am trying to access delindex via a floppy disk and when inserted into the drive on reboot, the computer disregards whatever is in the floppy drive and continues to boot into windows. Once in windows I would right click on floppy drive icon and then click onto explore, and an error message stating "A:\ is not accessible. The system cannot read from the specified device". I would then try to run scandisk on the A:\ drive with more errors stating "Scandisk detected an error while reading your drive. Scandisk detected an error while writing to your drive". The computer would then freeze. I've tried using different floppies and also tried to update the floppy disk controller from device manager to no avail. Can anyone offer some advice on troubleshooting this problem? The floppy is my only means to get into DOS on windows Me. Thanks. Tag: corrupted pages Tag: 265990
  - 4
    - New power supply needed Was in the process of installing wireless card to winME. System has been disconnected/no power for sometime due to office renovation. Plugged everything back up - guess what, no power. Took the cover off, no smell or scorch marks that I can see. My guess is a new power supply, but just want to be sure before I go out and buy one. Thanks much! -- Penni Hillsborough, NC Tag: corrupted pages Tag: 265989
  - 5
    - NTLDR is missing !! Please help Ok, My sons computer won't boot I keep getting the NTLDR is missing press any key to restart. So I go through support on the web and obviously I need a Windows/ME boot disk. Well I don't have one and I can't open the cd rom either because of the problem. I need a start up disk to get into the system and fix the ntldr file. If you can help and possibly lead me in the right direction if I have run astray I would appreciate it. Please email me at jzachary@zaxpax.com thanks Jan Tag: corrupted pages Tag: 265987
  - 6
    - Control Panel is Empty Hi All, I have a Toshiba 2800 with win me. when i open the control panel, the window is empty however, in the bottom left corner it tells me there are items but I cannot see them. The same occurs when i click on my computer, i see the floppy and cd and c drive, but when i click on the c drive, i get an empty window and again it says in the bottom corner, xx items. what's wrong with my ME? Lorne Tag: corrupted pages Tag: 265977
  - 7
    - "A requrired DLL file, MFC42.dll, was not found" I have been errors in Windows ME lately, requiring scandisk fixes. No, when I try to run three different programs, I am getting the error message, "A requrired DLL file, MFC42.dll, was not found." I know there are websites that will provide DLL files. Should I just try to dowload the MFD42.dll file? Or, does this error message indicate some other problem? If so, I will appreciate advice. Tag: corrupted pages Tag: 265972
  - 8
    - Dial-Up Connection using BY Yahoo! Anytime and BTBBroadband My internet connection on BT Yahoo Anytime unsing Connexant HSSF V92 56K RTAD Speakerphone Modem on COM3 was faultfree. When I tried to transfer to BT Basic Broadband sing BT Voyager 105 ADSL Modem my Standard Dialup was transferred to BT PayasyouGo Dial Up which I intended to use as a back-up of Broadband failed. On trying to install BT Broadband I continually found "Dial Up Modem not found". Whenever I tried to connect to Broadband the low speed dia; up mem was connected instead even thoughthe BT Broadband was "default". In the end I got BT Broadband connected by removing the Dial-Up from the Control Panel. The connection worked until the computer was shut down when the Broadband connection would fail and the only way to restore it was to insert the BT Broadband CD and run the dslsetup.exe and reinstall thje Voyager Drivers over the old ones. The powered up reboot could be used without trouble. I then restored the Dial-Up to the Control Panel after uninstalling the BT PayasyouGo. Once again the system worked correctly but I now lose the Broadband connection (if try to connect get "Dial-Up modem not found") and can only restore by rerunning dslsetup.exe. Please advise: 1. How to obtain connection which will maintain the computer on BT Basic Broadband after both rebooting and repowering computer. 2. How to still have a backup low speed connection of Broadband fails. Thanks Martin Tag: corrupted pages Tag: 265952
  - 9
    - CTRL+ALT+DEL loop My cousin just purchased a used comp the o s is windows ME. After install a spy/adware removal progam, everything is fine UNTIL, the last 1 % of the removal process. the comp restarts, has a blue screen with the usual 2 options, " press any key or ctrl+alt+del..." however this was not suppose to happen. had to completely shut down the power to the unit in order to do anything. when i'd press "any key" it'd go back to the "LOOP". when i'd press "ctrl+alt+del" it'd go back to the "LOOP". plus have the following error message 0E : 0197 : BFF7834F. I'm about ready to shread the comp. -- truckrwolf Tag: corrupted pages Tag: 265949
  - 10
    - ID of C_Restore files Good morning, afternoon or evening (as the case may). After my last visit, as I mentioned at the time, I was able to recover 3GB of space. I know this is not a lot to those that have 100GB+ drive but when you have only 20GB, it's a big deal. Since then I have been watching this particular folder and I am wondering if I could get a bit of insight about the files. I am currently running the following: Win Me 4.90.3000, IE 5.50.4807.2300 with my trusty Outlook Express. My startups are ZA 2.6.362, Spyblocker 5.0 and AVG 7.0.308. In my restore/archive folder, as of 04/29/2005, I have FS1.cab through FS9.cab and RG42682079.cab through RG4272378c.cab. These files total 152MB. I flushed this folder 04/21/2005. My questions. 1. What do the FS and RG zip files represent? 2. Should I be generating these files in this way at this pace? 3. Do I need to reset some switches and if so which ones? Thank you in advance for your help. Rita Tag: corrupted pages Tag: 265945
  - 11
    - tv newsgroups Problem restoring newsgroups.Need configuration. What do I do? Tag: corrupted pages Tag: 265932
  - 12
    - Error in <unknown> My PC suddenly face a error message during startup. the message is this: Scandskw has caused an error in <unknown>. Scandskw will now close. After all my PC cannot go into windows, plz help, thanks. My PC system is P3 Windows ME OEM. Tag: corrupted pages Tag: 265922
  - 13
    - system resource management Is there any good free programs that release system resources after a program has been closed? I understand that many programs keep a hold of system resources even after you shut them down. -- -Jesse Tag: corrupted pages Tag: 265920
  - 14
    - Windows Me freezes up while connected to internet I have Windows ME, IE and Mcafee and all is updated. For a little over one week now, almost every time I am online doing anything, after about 10-15 minutes, everything locks up. Ctr, Alt, delete will work some times but the majority of the time it does nothing. Only option is turn off computer and then scan disk for errors when turned back on. This may have started right after an update for IE or Mcafee. I am just not sure. It does seem that it happens more when I am connected to internet than just doing offline work. But it did do it when I tried to do a system restore. When came back on, had error message that it was unable to restore. When tried to restore again, no dates were shown on calendar. Now I do not know what to do. I am not very computer saavy so please explain how to fix with that in mind. I can however follow pretty good directions. Thanks for your help. Judy Tag: corrupted pages Tag: 265919
  - 15
    - UTF-8 When should "Always send URLs as UTF-8 (requires restart)" be checked? Thank you. Harry. Tag: corrupted pages Tag: 265912
  - 16
    - Remnants of attack Got hit bad: viruses, trojans, malware, hijack, you name it...after my grandson "used" the machine... I had no choice but try to "fix" it!!! Disconnected from the SP and did a System Restore to the day before and ran the following first in safe mode, Why? dont know. Ad=Aware SE: had 1 running process, 1 process in reg., and several lesser "things": all removed. Ran Spyboot S&D: all ok Ran Stinger: an hour and 161,476 files later: nothing. Ran HiJackThis: <g> got a big log (well not that big) and kept it. Did a complete thorough Virus Scan. Anything else I could do to improve the speed a little bit, a little bit; it is slower than "before". also are these files now quarantined genuine WIN Me= lmgliz.txt, vqzcla.dat. Also (hate to ask because of the previous question about the Clipboard Viewer), but the Recycle Bin icon shows full and theres nothing in it, even if I try to dump something, cant find anything ressembling it in a search. As always tks in advance. -- cogito ergo sum Tag: corrupted pages Tag: 265908
  - 17
    - Ad-aware [SE1R42] 28.04.2005 <http://aumha.net/viewtopic.php?t=13268> Links for freeware support included. Regards, Silj -- siljaline MS - MVP Windows (IE/OE) & Security, AH-VSOP __________________________________________ Security Tools Updates http://aumha.net/viewforum.php?f=31 (Reply to group, as return address is invalid - that we may all benefit) Tag: corrupted pages Tag: 265899
  - 18
    - WOOF Just after I had my interview with ORAL, I interviewed VCA. They seemed a lot like ORAL and OCA except that they organized vets. I watched the company and it had problems and went private. Then it came back again with a new stock symbol WOOF. I have seen them recommended quite a bit lately--even tho I am skeptical. At the time I interviewed them their taxes seemed in a terrible mess--made ORAL look good so I told them I was not available. They had a separate corporation for each practice. Would have been nice otherwise as they were in walking distance of my house. They were also an Andersen client. Anyway, saw this about them today. Shares of VCA Antech (WOOF:Nasdaq - commentary - research) rose 9.3% after the animal health care company posted first-quarter earnings that were better than expected. The company posted earnings of $17.2 million, or 21 cents a share, on sales of $186.9 million. Analysts were expecting earnings of 19 cents a share on sales of $183.4 million. A year ago the company earned $14.7 million, or 18 cents a share, on sales of $144.4 million. Looking ahead, VCA now expects full-year earnings of 87 cents to 89 cents a share on sales of $779 million to $788 million. Previously, the company expected earnings of 85 cents to 87 cents a share on sales of $773 million to $786 million. Analysts had been expecting earnings of 87 cents a share on sales of $782.4 million. Shares traded up $1.99 to $23.49. Tag: corrupted pages Tag: 265893
  - 19
    - AltGr key doesn't work in an MS-DOS window I've just performed a new install of the U.S. version of the Windows Me Promotional Step-Up under MS Virtual PC 2004 SP1. I'm using a French National ("AZERTY") keyboard. I'm trying to get the French keyboard layout recognized in an MS-DOS window. I tried following the instructions in MSKB 261417 -- I launched MSCONFIG.EXE, clicked on the International tab, set the Keyboard Layout to "fr", and rebooted, but this had no effect. The keyboard under MS-DOS retained the U.S. layout. To get the French layout partially recognized under MS-DOS, I found that the Language ID had to be set to "fr", the Country Code had to be set to 33, and the Keyboard Data File Name had to read "keyboard.sys" (without the path). Per MSKB 272719, including the full path prevented the new layout from being recognized. AFAICT, the following fields had no effect: MS-DOS Code Page, Country Data File Name, Display Data File Name, Keyboard Type, and Keyboard Layout. However, no matter how I configure the International tab, the AltGr key (the right-Alt key) still does not work and I have no access to such characters as the backslash (AltGr + 8) or the at-sign (AltGr + 0) in the MS-DOS window. Of course, I can fall back to using the Alt key codes or copy and paste from Character Map, but this is quite cumbersome. How can the AltGr key of the French keyboard be recognized in an MS-DOS window when using the U.S. version of Windows Me? regards, Andy -- ********** Please send e-mail to: usenet (dot) post (at) aaronoff (dot) com To identify everything that starts up with Windows, download "Silent Runners.vbs" at www.silentrunners.org ********** Tag: corrupted pages Tag: 265885
  - 20
    - How to get to Safe Mode This is a multi-part message in MIME format. ------=_NextPart_000_015B_01C54BD8.D08B81F0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hello: I hate to ask as I know this is a really simplistic and basic question. I have a Dell Dimension 4100 with WINME. Sometimes it operates erratic = and I see a lot of advice to run AV etc. in the Safe Mode. I'm drawing = a blank between my ears and would appreciate if someone would tell me = which key to push to get to the safe mode. I do know it needs to be done upon startup when the blue DELL screen = appears. Thanks in advance for the advice. Mike ------=_NextPart_000_015B_01C54BD8.D08B81F0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Diso-8859-1"> <META content=3D"MSHTML 6.00.2900.2627" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=3D#ffffff> <DIV><FONT face=3DArial>Hello:</FONT></DIV> <DIV><FONT face=3DArial></FONT> </DIV> <DIV><FONT face=3DArial>I hate to ask as I know this is a really = simplistic and=20 basic question.</FONT></DIV> <DIV><FONT face=3DArial></FONT> </DIV> <DIV><FONT face=3DArial>I have a Dell Dimension 4100 with WINME.  = Sometimes=20 it operates erratic and I see a lot of advice to run AV etc. in the Safe = Mode.  I'm drawing a blank between my ears and would appreciate if = someone=20 would tell me which key to push to get to the safe mode.</FONT></DIV> <DIV><FONT face=3DArial>I do know it needs to be done upon startup when = the blue=20 DELL screen appears.</FONT></DIV> <DIV><FONT face=3DArial></FONT> </DIV> <DIV><FONT face=3DArial>Thanks in advance for the advice.</FONT></DIV> <DIV><FONT face=3DArial></FONT> </DIV> <DIV><FONT face=3DArial>Mike</FONT></DIV></BODY></HTML> ------=_NextPart_000_015B_01C54BD8.D08B81F0-- Tag: corrupted pages Tag: 265878
  - 21
    - Temporary Internet Files folder - settings 128 RAM 32.4 GB free space on HD What's the recommended allowance for the temporary internet files folder? The slider on my settings dialogue box goes from zero to 32000MB. I recently read a post suggesting that it should be set at 20MB. The reason I ask, is that since reducing the allowance from around 3815MB to 20MB, I seem to to be getting more IE errors. Does IE error when the allowance is reached? Or does it discard older files as necessary? I'd appreciate some feedback on this. Thanks Tag: corrupted pages Tag: 265864
  - 22
    - Bad Sectors Remover Is there any bad sector remover available for free(preferable)/purchase. Farhan Tag: corrupted pages Tag: 265862
  - 23
    - Re: system font? Thank you Mart I tryied to reinstall Marlett.ttf as described in the article, but I don't know how to delete first the old one installed in Fonts folder. Anyway, my max/min/restore symbols are actually ok... Could it be a Unicode font corrupted? Thanx Al ------------------- A long shot ... Regarding your rectangles instead of characters, if they are also affecting the Max/min/restore symbols, this is sometimes caused by a missing/corrupted Marlett font. Try:- "Description of and Troubleshooting the Marlett TrueType Font" http://support.microsoft.com/default.aspx?scid=kb;[LN];134861 The article also refers to the maximum number of fonts and the suggestion of deleting the ttfcache file, which you've already tried without success. HTH and good luck Mart Tag: corrupted pages Tag: 265852
  - 24
    - Startup Window (DOS) Always Boots Recently I had to chase a virus using safe mode. Norton gave a couple of options for getting to safe mode and I chose to take the "msconfig/system configuration utility/advanced/check enable Startup Menu" route.. It worked, I got to Safe Mode and the virus was dispatched. I rebooted and unchecked the "enable Startup Menu". On reboot I still get the DOS menu with the options to "1. Normal.....3..SafeMode etc...." I then followed Norton to Microsoft help and found my msdos.sys file. It did not have an entry for "BootSafe=1" that I could change to "BootSafe=0". So I added that line, "BootSafe=0" at the top (I think). But it still goes to the black and white menu on boot up and I still have to choose "Normal" to finally boot to the WinMe screen. Appreciate any help! Tag: corrupted pages Tag: 265838
  - 25
    - Clipboard Viewer Hi all I've been using cut&paste for so long (using Ctrl C & V) just to realized now that I need the Clipboard Viewer; its not in the System Tools anymore. Cant be found with Search. I know the program is still there, could use a link in the Help & Support. Where can I retrieve it? The reason I want it is to use the "Print Screen key" (which I never used before...in 4 years. Or is there another way to use that key for a screen shot. But I'd like to get the Viewer back if possible. Tks in advance. -- cogito ergo sum Tag: corrupted pages Tag: 265835

I can't see the small words on IE. The words are blowry. Is it a virus I have
and what is the name of the virus. How can I fix this problem ?

Top

Re: corrupted pages by Jack

Jack
Fri May 06 07:56:07 CDT 2005

First, read and rerread http://www.dts-L.org/goodpost.htm

Then, open IE, and examine tab=View, "Font size", and choose a larger font
size.

If you persist in surmising that you may have a virus, obtain the free DOS
AV tools. F-Prot for DOS and EOD32 for DOS, and create the bootable
floppies, and scan your machine in DOS mode. You may wish to use the AV
disk floppy creation tool at www.avdisK.org, to simplify the process. You
run this tool after installing the DOS AV tools.

If you have more questions about the AVDisk tool, direct your requests to
our colleague, Shane, who is very knowledgeable about it.

--
Jack E. Martinelli 2002-05 MS MVP for Shell/User / DTS
Help us help you: http://www.dts-L.org/goodpost.htm

http://www.microsoft.com/athome/security/protect/default.aspx
In Memorium: Alex Nichol
http://www.microsoft.com/windowsxp/expertzone/meetexperts/nichol.mspx
Your cooperation is very appreciated.
------
"FlacFlac1000" <FlacFlac1000@discussions.microsoft.com> wrote in message
news:C46CD950-3C4E-469E-AAE7-F8CF34FFD1FB@microsoft.com...
> I can't see the small words on IE. The words are blowry. Is it a virus I
have
> and what is the name of the virus. How can I fix this problem ?

Top