Windows Millenium/pentium 2

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Help! Can't get beyond Windows Me start up menu Message appears:Warning Windows didn't finish loading on previous attempt, choose safe mode.....Can't get there-Have tried all 4 options, still come back to menu. Used start up disk; scanned all disk, no problems found / scanreg and scanreg /restore-restored thru all available points. Still stuck at start up menu. Any suggestions as what to do next. Have tried but can't get in DOS pushing F8 on reboot. Thanks for any help pak Tag: Windows Millenium/pentium 2 Tag: 254966
  - 2
    - Spyware Blaster Update 09/11/04 http://forum.aumha.org/viewtopic.php?t=9257 Silj -- siljaline MS - MVP Windows (IE/OE) 2003/04 AH-VSOP ________________________________________ Security Tools Updates http://forum.aumha.org/viewforum.php?f=31 (Reply to group, as return address is invalid - that we may all benefit) Tag: Windows Millenium/pentium 2 Tag: 254950
  - 3
    - Help! Can't get past Windows Me start up window Windows begins to load but goes to start up window with message:Warning Windows didn't finish loading on previous attempt, choose safe mode to start w/minimal drivers. Have tried all 4 choices (incl. safe mode), but always OS begins then goes back to startup again. Started w/start up floppy, ran scanreg=no problems. Didn't scandisk because read a post saying it might cause info. loss. Any suggestions, please, where to go from here? pak Tag: Windows Millenium/pentium 2 Tag: 254948
  - 4
    - Help-can't get past Windows start up menu Don't know what happened. Windows begins to load but goes to Start up menu-says: did not finish loading on previous attempt-choose safe mode to start with minimal set of drivers. No matter what I enter, (normal, safe mode) it starts to load but ends up there again. Have tried various 'step-by-step-confirmation' choices (just guessing what to choose) but still same results. Used Start up floppy, scanreg=no problems found. Didn't surface scan because I read a post that said this might cause loss of information. Any suggestions please? pak Tag: Windows Millenium/pentium 2 Tag: 254947
  - 5
    - insufficient memory My computer ( Compaq Athlon 1.4, 1 Gig of memory) freezes after starting to use almost any software. Not enough conventional memory to proceed please close other programs and retry. I am not running any others and my system performance is at 94%. The monitor freezes or goes blue screen. I cannot reboot with restart or shut down from the start menu and have to cold boot by pressing the main switch. I have scanned and defragged apparently way too often in the past two years (daily). I have now drawn a black screen and can barely get started with the boot up floopy disc. I have no viruses according to AVG free antivirus software. It seems my alternatives are the restore to factory disc pack that comes with the factory Compaq instead of a milleniu disk which I also now have but will not overwrite because of the memory problem. Or install an new harddrive and operating system. Any suggestions or questions thanks Mitch Tag: Windows Millenium/pentium 2 Tag: 254941
  - 6
    - insufficient memory My computer ( Compaq Athlon 1.4, 1 Gig of memory) freezes after starting to use almost any software. Not enough conventional memory to proceed please close other programs and retry. I am not running any others and my system performance is at 94%. The monitor freezes or goes blue screen. I cannot reboot with restart or shut down from the start menu and have to cold boot by pressing the main switch. I have scanned and defragged apparently way too often in the past two years (daily). I have now drawn a black screen and can barely get started with the boot up floopy disc. I have no viruses according to AVG free antivirus software. It seems my alternatives are the restore to factory disc pack that comes with the factory Compaq instead of a milleniu disk which I also now have but will not overwrite because of the memory problem. Or install an new harddrive and operating system. Any suggestions or questions thanks Mitch Tag: Windows Millenium/pentium 2 Tag: 254940
  - 7
    - freezing from insufficient memory Compaq 1.4MGH, 1 gig of ram, Windows ME After a fresh start up with a system performance at 94% my computer now freezes after opening as little as MY COMPUTER. I tried to rerun ME to freshen up my system but get the warning message Insufficient conventional memory to run this program. try shuting down other programs to free up some. There is nothing else running including antivirus or firewall. I have to cold boot to restart because start/restart or start/shutdown does not work. I have been getting a black screen with inproper start up and had to resort to the boot up disk to restart which also failed sometimes. I feel it is my western harddrive failing after so many blue screens in the past two years. I ran the free avg updated virus software and it says no viruses. I have been running diskscan and defrag too regularly almost daily for a long time thinking that was a good thing. I could do a thorough scan in an hour instead of 14 hours when I first bought the computer. I am about to use the restore disks from Compaq which will wipe out many unreplaceable software programs and return to factory condition or put in a new hard drive. Ring a bell with any of you pros. thanks Tag: Windows Millenium/pentium 2 Tag: 254939
  - 8
    - safe mode with network support Is there a way to boot ME into safe-mode with networking support (TCP/IP suite)? I have tried adding Network= 1 in msdos.sys, but the option for safemode with netwok support does not come up after pressing F8 Tag: Windows Millenium/pentium 2 Tag: 254915
  - 9
    - VMM32.VXD and no disk I was finally getting around to copying some files from my old tower for transfer. In the midst of it my computer(hp xg833) shut down. When it came up, it didn't load fully. It said file missing-vmm32.vxd and I couldn't get the computer started up in any mode. I went to find the start-up disk for my computer and it had apparently been broken in the move a year and a half ago. I am now trying to find either a solution that does not require the disk or a fresh copy of my start up disk. When I contacted HP they bounced me back to Microsoft. Thank you in advance for any help. Please email me at russel1872@aol.com. Thanks Tag: Windows Millenium/pentium 2 Tag: 254907
  - 10
    - WinME and Win98 differences Where can I find the differences between WinME and Win98? Thanks for any help. Jack Tag: Windows Millenium/pentium 2 Tag: 254902
  - 11
    - OT: Access attempts In the last couple of days, Zone Alarm is blocking thousands of access attempts. Anyone know what all this activity is, and how it can be stopped? (short of unplugging cable modem)? George Gee Tag: Windows Millenium/pentium 2 Tag: 254901
  - 12
    - Ad-aware [SE] [1R18] 08.11.2004 http://forum.aumha.org/viewtopic.php?t=9249 Silj -- siljaline MS - MVP Windows (IE/OE) 2003/04 AH-VSOP ________________________________________ Security Tools Updates http://forum.aumha.org/viewforum.php?f=31 (Reply to group, as return address is invalid - that we may all benefit) Tag: Windows Millenium/pentium 2 Tag: 254899
  - 13
    - explorer 6.0 upgrade I've tried countless times to go from Exp 5.5 to 6.0 (from download and from CD) - at about 76% of install, I get "Setup was unable to install all the components". I've turned off Norton, shut down programs, but nothing changes result. I was hoping 6.0 would stop the "blue screen of death" that I have been getting in Exp. Any hints would be appreciated. Tag: Windows Millenium/pentium 2 Tag: 254897
  - 14
    - control panel .cpl files Where can I get downloadable copys of the control panel .cpl files for windows ME.Thanks Tag: Windows Millenium/pentium 2 Tag: 254891
  - 15
    - Lost software for digital camera I am trying to download images off a digital camera that is so *cheap* that it has no make or model. However, it did work before, but I was hoping to _explore_ to it, or similar --- to no success. Any ideas? I downloaded some freebee stuff, but that didn't seem to work out. And quite frankly, I forget now. Tag: Windows Millenium/pentium 2 Tag: 254883
  - 16
    - Memory not working? I upgraded my memory from the basic 128 MB to 384 MB. The computer doesn't seem to run any faster and the only differences is System Monitor shows ME after startup takes more of my available memory to run and the system crashes more often. The computer recognizes that I have extra memory, but I don't know why it doesn't seem to be helping. Tag: Windows Millenium/pentium 2 Tag: 254875
  - 17
    - Ping! Silj, and others, regarding adware detection applications My wife, bless her little heart, found this report on adware detection and removal applications (http://www.adwarereport.com/mt/archives/000004.html) during her surfing the internet recently. She believes that we may want to invest in one of the more highly rated ones (we both have Ad-aware SE and SpyBot S&D on our machines) as she was concerned with the figures given by this site in their performance. I'm not familiar with any of the other applications, nor can I recall reading anything in here or others groups regarding them, so I'd like to get some opinions/advice before making a decision to "upgrade" to a different adware killer. Any feedback will be greatly appreciated. Marty who likes free stuff that works well!! Tag: Windows Millenium/pentium 2 Tag: 254871
  - 18
    - removing programs from quick launch Does anyone know how to get rid of programs that have inserted themselves into the quick launch bar, that is, open themselves whenever the system boots? I know some have to be open but others are just a time consuming pain and I would rather just start them from the start programs menu when needed. I can not find this in the help menus for Windows ME. Thank you in advance for your help. Tag: Windows Millenium/pentium 2 Tag: 254869
  - 19
    - removing programs from quick launch Can anyone tell me how to remove programs from the quick launch task bar? Every time my computer boots a bunch of useless programs open, very annoying, I can't find any instructions for removing them in the general help menus. Thank you very much in advance. Tag: Windows Millenium/pentium 2 Tag: 254868
  - 20
    - Need ifsmgr updated - assistance appreciated Have problem related to known bug in ME, Need following, June 19, 2001 4.90.3003 185,910 Ifsmgr.vxd Windows Millennium Will email free beer in exchange for link/file. User in panic. -- Too poor for a decent sig. Tag: Windows Millenium/pentium 2 Tag: 254858
  - 21
    - Help, I can't empty the recycled bin I downloaded Need For Speed Underground demo and Call of Duty United Offensive demo from www.filerush.com. After I delete these files to the Recycle Bin, I can't empty the recycled bin. Does anyone have any ideas how to empty the recycled bin to free up disk space? Tag: Windows Millenium/pentium 2 Tag: 254854
  - 22
    - "Explorer has caused an error in GDI32.DLL." X-No-archive: yes Hello, After I use Yahoo Messenger and try to access anything via the start menu or within folders on the desktop, I get the following error: "Explorer has caused an error in GDI32.DLL. Explorer will now close. If you continue to experience problems, try restarting your computer." My OS is Windows ME, obviously ;) I am getting tired of restarting my pc several times a day. Now, I've been in touch with Yahoo Tech Support, but they claim they are aware of the problem, but don't yet have a fix. I have to use Yahoo Messenger for work, although I suggested they look into Trillian. So, I'm trying to see if I can fix this from the other end, by dealing with the OS. Any comments or suggestions would be most appreciated. TIA. Tag: Windows Millenium/pentium 2 Tag: 254849
  - 23
    - CXTPLS Not Responding While on the internet my PC constantly hangs up. When I hit Ctrl-Alt-Del I find 2 things "not responding", the web site I am on and CXTPLS. Any ideas?? Tag: Windows Millenium/pentium 2 Tag: 254848
  - 24
    - Start up cursor Lately upon start up the cursor stays blinking for 15-20 seconds before the M E screen appears. Any suggestions would be appreciated Tag: Windows Millenium/pentium 2 Tag: 254846
  - 25
    - Start up cursor Lately upon start up my screen stays blank with the cursor blinking at the top for about 10-20 seconds before the M E screen appears. Any insight would be appreciated. Tag: Windows Millenium/pentium 2 Tag: 254845
- Next
  - 1
    - Winmgmt Winmgmt gets loaded up not at startup but after that during the working session (without any warning) and caused a problem to shutdown the computer. (Explorer, Systemtray Winmgmt). Any suggestion/solution would be appreciated. Entries in the winmgmt.lgc file are something like this. { o c140ef90 3004d "C:\WINDOWS\SYSTEM\WBEM\WINMGMT.EXE" R c140ef90 0 40 R c140ef90 e8 f8 R c140ef90 e8 198 R c140ef90 2e000 1000 r c140ef90 2b000 1000 o dd2a94d0 ac043 "C:\WINDOWS\SYSTEM\WBEM\WBEMCOMN.DLL" R dd2a94d0 7d000 1000 R dd2a94d0 7e000 1000 o dd286390 47035 "C:\WINDOWS\SYSTEM\MSVCRT.DLL" R dd286390 3a000 1000 R dd286390 3a000 1000 R dd286390 34000 1000 } Tag: Windows Millenium/pentium 2 Tag: 254841
  - 2
    - Networking / Workgroups Windows ME I am trying to remove a workgroup from a PC. I am unaware of when it was created or by whom in the family. There are no workgroups and no network. This is a standalone PC. How do I remove this "MShome" group? Tag: Windows Millenium/pentium 2 Tag: 254839
  - 3
    - presto page manager Page Manager comes bundled with vistascan software. After reloading windows ME page manager refuses to load, having been OK with windows ME before. Software company says it is a fault with the operating system. Any experience with a similar problem? any solutions or suggestions greatly welcomed. Ken Hutson Tag: Windows Millenium/pentium 2 Tag: 254834
  - 4
    - Many errors... One solution? I own a Dell laptop (specs follow) that connects through a networked DSL modem. I am using it right now, in fact. A few weeks ago, the computer was suddenly infected with spyware after my son installed Gnutella lite on it. as if uninstalling three searchbars and 93 data miners wasn't enough, they (I suppose) caused my linksys WPC54G wireless network card to go haywire, disconnecting me from the network for two weeks before I was able to set it straight. But even now, it is still not working correctly, as the configuration utility is seeming to not want to communicate to the card, even after multiple reinstallations. Added on to that, multiple system DLLs have been corrupted or something, since the Open/Save/Print dialog box is not opening and explorer(AKA to all the techies as the Shell) is freezing every so often upon startup. Does anyone know how to fix this? Tag: Windows Millenium/pentium 2 Tag: 254831
  - 5
    - SHLWAPI.DLL Error Hello MVP Team, I removed M/S encoder ver.7 from my M/E box and, now when I try to go to control panel, I receive an SHLWAPI.DLL error. Any clues? Thanks in advance Tag: Windows Millenium/pentium 2 Tag: 254829
  - 6
    - NTKERN.VXD device loader i have a new laptop running windows ME, when i install the driver for my camera windows stops it part way through saying it does not need the driver as windows has usb device drivers allready installed. when i plug in the camera nothing happens. there is no removable disk showing in 'my computer'. i check in 'device manager' and there is a yellow '!' next to usb mass storage device. i open the properties and this is written 'the NTKERN.VXD device loader(s) for this device could not load the device driver (code2). my camera works fine on my desktop pc running 98se.... please help...... thanks Tag: Windows Millenium/pentium 2 Tag: 254828
  - 7
    - NTKERN.VXD device loader(s) could not load the device loader (code i have a new laptop running windows ME, when i install the driver for my camera windows stops it part way through saying it does not need the driver as windows has usb device drivers allready installed. when i plug in the camera nothing happens. there is no removable disk showing in 'my computer'. i check in 'device manager' and there is a yellow '!' next to usb mass storage device. i open the properties and this is written 'the NTKERN.VXD device loader(s) for this device could not load the device driver (code2). my camera works fine on my desktop pc running 98se.... please help...... thanks Tag: Windows Millenium/pentium 2 Tag: 254827
  - 8
    - NTKERN.VXD device loader(s) could not load the device driver (code i have a new laptop running windows ME, when i tryed to install may digital camera driver, part way through windows stops installation saying the driver is not needed as windows has usb device drivers installed. when i plug in the camera nothing happens, there is no removable disk showing in 'my computer'. i check in 'device manager' and there is a yellow '!' beside 'usb mass storage device'. i open usb mass storage device properties and this is what is written 'the NTKERN.VXD device loader(s) for this device could not load the device driver (code 2). i have no problems using my camera with my desktop pc running 98se...... can anyone help me please?....thanks Tag: Windows Millenium/pentium 2 Tag: 254826
  - 9
    - Computer won't start I'm using ME, and I screwed up something in the system files. I have a XP disk, and I'd like to replace the ME with it, but I can only start my puter up in SAFE MODE and the CD drive isn't working...the driver isn't loading??? I've tried RESTORE and it won't help. How do I get the puter to read the CD??? Thanks for any help... Dennis Tag: Windows Millenium/pentium 2 Tag: 254821
  - 10
    - Computer won't start I'm using ME and I screwed up something in the system files. I have a copy of XP I'd like to install, but I can only start up in SAFE MODE and my cd and floppy don't do anything (the drivers aren't installed in SAFE MODE??) So how do I get my computer to read my XP disk?? BTW, I tried the restore and it won't work. Thanks for any help... Dennis... Tag: Windows Millenium/pentium 2 Tag: 254820
  - 11
    - Memory Size Error Hi, I have a Compaq Presario 5WV230 5000 Series PC. It has a AMD Duron TMProcessor 700MHz. I have just added 128MB SDRAM to the 64MB that it had when I purchased. On startup I get the error message: 64 MB OK 04000040 47 201-Memory Error 164-Memory Size Error With 2 options: (F1 Boot) which causes the computer to shut down unless I go into safe mode. (F10 Computer Setup) and I can't see anything in here to adjust. Any suggestions? Tag: Windows Millenium/pentium 2 Tag: 254815
  - 12
    - Printing from DOS I have an old DOS based program that I want to print from. Unfortunately I have been unable to get it to do this for me under Win Me. Any suggestions? Andrew Bowie abowie@internode.on.net www.users.on.net/abowie Tag: Windows Millenium/pentium 2 Tag: 254812
  - 13
    - Battery and cmos Hi! I know that my question may sound crazy, but I canÂ´t find very clear information about this subject, so I decided to ask for your help. On the "Control Panel", in the "Energy Options" I canÂ´t find the Option "Alarms". IÂ´m worried about my PCÂ´s baterry. I donÂ´t know if it is low and if I need to change it. In case I need to change my battery, is that going to create any problem to the program CMOS? Some people say that we need to copy information from CMOS before changing battery. Thank you for your support. Carla Portugal Tag: Windows Millenium/pentium 2 Tag: 254807
  - 14
    - Manual restore points Hello! I have two questions about restore points. 1- How can I delete a manual restore point that I have created? 2- How many manual restore points can I create on my PC? I have Windows Me installed, I have a 40 GB disk (with almost 38.5 GB of free space), my memory RAM is 326 MB and, besides Windows Me, I have installed MS Office, Panda Software AV and Firewall and Roxio CD Creator. Thank you. Carla Portugal Tag: Windows Millenium/pentium 2 Tag: 254805
  - 15
    - DEFRAG00203 What does this mean? I have Win Me, fully updated. During the last defrag, it stopped and a box displaying this notice number appeared. It said there was a problem and could not continue, try ScanDisk. I searched the Microsoft knowledge base with that number and found nothing. Sequence of events. The computer hanged in the last stages of a normal shut down. I then performed maintenance is safe mode. Just before I did defrag, I did the regular ScanDisk and it found an error in the boot record and fixed it. After the defrag problem I ran ScanDisk twice, regular and thorough and neither one found problems. Defrag still gives this notice. My harddrive is partitioned into C,D, and E drives. ScanDisk and defrag performed normally on C and E. D drive had the problem described above. Can anyone help me with this problem? Thanks Scott Los Angeles Tag: Windows Millenium/pentium 2 Tag: 254804
  - 16
    - Re Tool bar Problems I finally cracked the problem thanks to the helpful replies . The answer lay in Tweakui IE settings. The Shell Enhancements box was unticked. and when I ticked it I found the Tool bar menu options were no longer grayed out. however I still could not select any of the bars.Gave a try at re booting and low and behold my quick launch bar appeared in full working order. Once again Thanks to All hoping this information will help anyone else who has this problem. Bill Tag: Windows Millenium/pentium 2 Tag: 254800
  - 17
    - Ad-aware [SE] [1R17] 05.11.2004 http://forum.aumha.org/viewtopic.php?t=9181 Silj -- siljaline MS - MVP Windows (IE/OE) 2003/04 AH-VSOP ________________________________________ Security Tools Updates http://forum.aumha.org/viewforum.php?f=31 (Reply to group, as return address is invalid - that we may all benefit) Tag: Windows Millenium/pentium 2 Tag: 254799
  - 18
    - Missing DDL file I am traveling - using my Acer 340T notebook with ME upgrade from Windows 98 installed - yes I know this is old, all my other computers (several) have XP. This is my traveling companion right now - but it has a problem. Upon opening, Wndows System Directory opens automatically. Then I get a RUNDLL error message - missing the following file: C:\WINDOWS\BXXS5.DLL Have searched Windows Sites fruitlessly. Anybody know why I am missing this file and where I can get a copy of it to download? Computer is working - albeit - not flawlessly. -- AgriTravlr - seeing the world with new eyes! Tag: Windows Millenium/pentium 2 Tag: 254785
  - 19
    - RunDLL problem I have an old ACER 340T Travelmate - Pentium 3 - operating on Windows ME. Needs a good clean-up but presently have one problem on start up. Windows System directory automatically opens, seems to be looking for a file that is missing. That file is a DDL file. Have searched without success, in the Windows ME support section, for the following missing driver - C:\WINDOWS\BXXS5.DLL I have the original disks for Win98 and ME upgrade - but am presently on the road - the discs are at home. My computer still operates but this problem recurs everytime I open the computer, and I can't seem to figure out where to get the missing DLL to reload into my computer. Any ideas or locations on where this DLL can be found, would be greatly appreciated. -- AgriTravlr - seeing the world with new eyes! Tag: Windows Millenium/pentium 2 Tag: 254784
  - 20
    - hidden windows folder I lost the Windows folder out of my c drive last week...i noticed a new temp folder appeared. I opened it up and there was a driver icon inside called lahide3.dll I have since deleted that and it does not seem to be able to refresh itself. If i go into i.e and delete my temp internet folders and press view files it opens up the temporary internet files folder....if i press back it opens my windows folder.....press properties and it has a tick at side of hidden...i cannot alter this tick at all so wondered if anyone knew how to? Something somewhere is keeping it in hidden mode....tried folder options and ticked show hidden files and folders but still no luck. Any ideas??? Thanks. Dave. Tag: Windows Millenium/pentium 2 Tag: 254779
  - 21
    - spool32 error my friend has Windows me, and bought a lexmark 1185, everytime we tried to install it before it completes it comes up with a spool32 error. I delete anything in regards to lexmark, but get the same thing when trying to install it? It is the correct driver for WME Tag: Windows Millenium/pentium 2 Tag: 254776
  - 22
    - Missing menu item... Hi. The "New..." on my right-click menu and Menu Bar in Windows Explorer has suddenly disappeared. I am unable to create new folders without it. Is this possibly the result of a virus? I've done a spyware scan & removal but not a virus scan yet. mccd Tag: Windows Millenium/pentium 2 Tag: 254766
  - 23
    - Missing menu item... Hi. The "New..." on my right-click menu and Menu Bar in Windows Explorer has suddenly disappeared. I am unable to create new folders without it. Is this possibly the result of a virus? I've done a spyware scan & removal but not a virus scan yet. mccd Tag: Windows Millenium/pentium 2 Tag: 254765
  - 24
    - Missing menu item... Hi. The "New..." on my right-click menu and Menu Bar in Windows Explorer has suddenly disappeared. I am unable to create new folders without it. Is this possibly the result of a virus? I've done a spyware scan & removal but not a virus scan yet. mccd Tag: Windows Millenium/pentium 2 Tag: 254764
  - 25
    - Win Config Utility STOP! Hello, This opens up upon startup. How do I make it stop, so I don't have to click on it to make it close.It is annoying as hell and don't need it. It's a Microsoft program that came with ME.Must be from my settings. It's not in the help file. Any help I would be glad to get. bye, Phil Tag: Windows Millenium/pentium 2 Tag: 254758

after working for an hour or so computer becomes slow, even the cursor
starts lagging behind the mouse when I move mouse.
please help

Top

Re: Windows Millenium/pentium 2 by Noel

Noel
Wed Nov 10 00:21:06 CST 2004

You may have a virus/spyware hijack

download the Stinger from here and run it to make sure that A-V-disabling
viruses are not present on your PC
http://download.nai.com/products/mcafee-avert/stinger.exe

- update your virus scanner and run a full system scan of all files.

Reboot to Safe Mode and run CWShredder - to remove variants of the
CoolWebSearch hijacker.
http://www.merijn.org/cwschronicles.html

Use CWShredder, the removal tool:
http://www.merijn.org/files/cwshredder.zip
http://www.merijn.org/files/CWShredder.exe
http://www.spywareinfo.com/downloads/tools/CWShredder.exe
http://www.zerosrealm.com/downloads/CWShredder.zip

download AdAware from www.lavasoftusa.com, install, update, and run it to
remove spyware, adware,
and other such nasties from your system.

--
Noel Paton (MS-MVP 2002-2005, Windows)

Nil Carborundum Illegitemi
http://www.btinternet.com/~winnoel/millsrpch.htm
http://tinyurl.com/6oztj

Please read http://dts-l.org/goodpost.htm on how to post messages to NG's

"noname" <noname@discussions.microsoft.com> wrote in message
news:BD6AE73E-C3B6-4BC7-A98B-96F68A6AC388@microsoft.com...
>
> after working for an hour or so computer becomes slow, even the cursor
> starts lagging behind the mouse when I move mouse.
> please help

Top