spool32 error
I've looked at other methods to fix this, but they don't
seem to apply or work.
First off, I installed a new HP printer and shortly after
that I would get error messages such as: Spool32 has caused
an error in KERNEL.dll or Spool32 has caused an error in
<unknown>. I uninstalled my old printers drivers, didn't
help. Booted up in safe mood/clean boot and even then I
would often get the spool32 error box to show up. I went
into my spool folder and found nothing in the PRINTERS
folder. I cleaned out the TEMP folder. Still getting the
same error on startup. I can't print if I close the error
box that shows up on startup. The error box shows up when I
want to open my Printers folder in my Control Panel. I've
tried printing directly to the printer. I've ran out or
tried just about all the possible solutions I have seen.
The error box shows up everytime I boot and am ready to use
my PC. Thanks in advance for your help. Tag: Test access Tag: 266111
Comm port invalid or busy
HELP! I've tried almost everything listed on these message boards to
resolve my comm port problem.
I have Windows XP. AOL 9.0. I use my modem for dial-up when away from
home. It runs (or used to) on comm port 3. I use broadband at home.
Until last week, both dial-up and broadband worked fine. Then, all of
a sudden, I couldn't dial-out anymore...receiving the dreaded message
"com port invalid or busy". I haven't added new hardware or software.
Broadband still works fine.
I've checked all my devices for conflicts and/or problems. All are
fine. I've uninstalled the Toshiba modem, and reinstalled. Modem
diagnostics say it's working fine. Changed serialkey settings. Didn't
help. I've deleted, changed, updated the AOL Adapter.
I'm ready to throw this laptop out the window!!
Anybody have ideas for resolution? Tag: Test access Tag: 266090
Scandisk/defragmentation
I did a scan disk in safe mode and it seems to stop 1/4 mark, so I decided I
will do deframentration then, Initially, the defragmentation process is ok
until it give this error message
"Window cannot defrag this drive bcos it cannot access part of drive. To
repair your drive, click scandisk (choose thorough option) and try
defragmentation again. ID# Defrag005"
So I try to do the scasndisk and it would even start. So I power off the
button and restart. Since it did not shut down the proper manner, it usually
try to scan the disk which it again did not start and give this message"
Msgsrv32 has caused an error in KRNL.386.exe. Msgsrv32 will now close. If
you continue to experience the problem, try restarting your pc."
Hdd Masxtor 40 gb, model 34098H4. Any idea what can I do, dont tell me that
the hdd is gone///// Tag: Test access Tag: 266089
ie6 losing custom shortcuts
I re-downloaded/reinstalled ie6, turned on 'inline autocomplete'
option like somebody suggested, but ie6 still loses all my custom key
shortcuts (ctl-alt-whatever) when the pc is rebooted. Any ideas?
thanks Tag: Test access Tag: 266059
microtrend-page cannot be display properly
This Millinnium pc has never been updated before, Thought doi an on line scan
first and when I try to download the housecall definitions, its says the page
cannot be display properly because of the setting. the is a cross in a small
box on the page. Any idea whats is missing. I have set the IE security
setting to default but it does not help.
Now decided to Windows update first and there is no problem.
Any idea how to get the housecall display properly, thanks Tag: Test access Tag: 266057
Desktop has gone black
I don't know if this was caused by a virus or not but my wallpaper has gone
and my desktop is completely black. It still has icons and they work. When
I right click on the desktop I no longer get the popup menu I used to get. I
get a simple one allowing me to select a screensaver and size settings. I
cannot select wallpaper and my active desktop options are gone.
Does anyone know what files might be corrupt and need replacing? Any other
ideas would be appreciated. Tag: Test access Tag: 266008
Problem with Floppy drive
I'm having a problem my A:\ or my floppy drive. I am trying to access
delindex via a floppy disk and when inserted into the drive on reboot, the
computer disregards whatever is in the floppy drive and continues to boot
into windows. Once in windows I would right click on floppy drive icon and
then click onto explore, and an error message stating "A:\ is not accessible.
The system cannot read from the specified device". I would then try to run
scandisk on the A:\ drive with more errors stating "Scandisk detected an
error while reading your drive. Scandisk detected an error while writing to
your drive". The computer would then freeze.
I've tried using different floppies and also tried to update the floppy
disk controller from device manager to no avail.
Can anyone offer some advice on troubleshooting this problem?
The floppy is my only means to get into DOS on windows Me. Thanks. Tag: Test access Tag: 265990
New power supply needed
Was in the process of installing wireless card to winME. System has been
disconnected/no power for sometime due to office renovation. Plugged
everything back up - guess what, no power. Took the cover off, no smell or
scorch marks that I can see. My guess is a new power supply, but just want to
be sure before I go out and buy one. Thanks much!
--
Penni
Hillsborough, NC Tag: Test access Tag: 265989
NTLDR is missing !! Please help
Ok,
My sons computer won't boot I keep getting the NTLDR is missing press any
key to restart.
So I go through support on the web and obviously I need a Windows/ME boot
disk.
Well I don't have one and I can't open the cd rom either because of the
problem.
I need a start up disk to get into the system and fix the ntldr file.
If you can help and possibly lead me in the right direction if I have run
astray I would appreciate it.
Please email me at jzachary@zaxpax.com
thanks
Jan Tag: Test access Tag: 265987
Control Panel is Empty
Hi All,
I have a Toshiba 2800 with win me.
when i open the control panel, the window is empty however, in the bottom
left corner it tells me there are items but I cannot see them.
The same occurs when i click on my computer, i see the floppy and cd and c
drive, but when i click on the c drive, i get an empty window and again it
says in the bottom corner, xx items.
what's wrong with my ME?
Lorne Tag: Test access Tag: 265977
"A requrired DLL file, MFC42.dll, was not found"
I have been errors in Windows ME lately, requiring scandisk fixes. No, when
I try to run three different programs, I am getting the error message, "A
requrired DLL file, MFC42.dll, was not found." I know there are websites
that will provide DLL files. Should I just try to dowload the MFD42.dll
file? Or, does this error message indicate some other problem? If so, I
will appreciate advice. Tag: Test access Tag: 265972
Dial-Up Connection using BY Yahoo! Anytime and BTBBroadband
My internet connection on BT Yahoo Anytime unsing Connexant HSSF V92 56K
RTAD Speakerphone Modem on COM3 was faultfree.
When I tried to transfer to BT Basic Broadband sing BT Voyager 105 ADSL
Modem my Standard Dialup was transferred to BT PayasyouGo Dial Up which I
intended to use as a back-up of Broadband failed.
On trying to install BT Broadband I continually found "Dial Up Modem not
found".
Whenever I tried to connect to Broadband the low speed dia; up mem was
connected instead even thoughthe BT Broadband was "default".
In the end I got BT Broadband connected by removing the Dial-Up from the
Control Panel.
The connection worked until the computer was shut down when the Broadband
connection would fail and the only way to restore it was to insert the BT
Broadband CD and run the dslsetup.exe and reinstall thje Voyager Drivers over
the old ones. The powered up reboot could be used without trouble.
I then restored the Dial-Up to the Control Panel after uninstalling the BT
PayasyouGo.
Once again the system worked correctly but I now lose the Broadband
connection (if try to connect get "Dial-Up modem not found") and can only
restore by rerunning dslsetup.exe.
Please advise:
1. How to obtain connection which will maintain the computer on BT Basic
Broadband after both rebooting and repowering computer.
2. How to still have a backup low speed connection of Broadband fails.
Thanks
Martin Tag: Test access Tag: 265952
CTRL+ALT+DEL loop
My cousin just purchased a used comp the o s is windows ME. After install a
spy/adware removal progam, everything is fine UNTIL, the last 1 % of the
removal process. the comp restarts, has a blue screen with the usual 2
options, " press any key or ctrl+alt+del..." however this was not suppose to
happen. had to completely shut down the power to the unit in order to do
anything. when i'd press "any key" it'd go back to the "LOOP". when i'd press
"ctrl+alt+del" it'd go back to the "LOOP". plus have the following error
message 0E : 0197 : BFF7834F. I'm about ready to shread the comp.
--
truckrwolf Tag: Test access Tag: 265949
ID of C_Restore files
Good morning, afternoon or evening (as the case may). After my last visit,
as I mentioned at the time, I was able to recover 3GB of space. I know this
is not a lot to those that have 100GB+ drive but when you have only 20GB,
it's a big deal. Since then I have been watching this particular folder and
I am wondering if I could get a bit of insight about the files. I am
currently running the following:
Win Me 4.90.3000, IE 5.50.4807.2300 with my trusty Outlook Express. My
startups are ZA 2.6.362, Spyblocker 5.0 and AVG 7.0.308. In my
restore/archive folder, as of 04/29/2005, I have FS1.cab through FS9.cab
and RG42682079.cab through RG4272378c.cab. These files total 152MB. I
flushed this folder 04/21/2005. My questions.
1. What do the FS and RG zip files represent?
2. Should I be generating these files in this way at this pace?
3. Do I need to reset some switches and if so which ones?
Thank you in advance for your help.
Rita Tag: Test access Tag: 265945
Error in <unknown>
My PC suddenly face a error message during startup. the message is this:
Scandskw has caused an error in <unknown>.
Scandskw will now close.
After all my PC cannot go into windows, plz help, thanks. My PC system is P3
Windows ME OEM. Tag: Test access Tag: 265922
system resource management
Is there any good free programs that release system resources after a
program has been closed? I understand that many programs keep a hold of
system resources even after you shut them down.
--
-Jesse Tag: Test access Tag: 265920
Windows Me freezes up while connected to internet
I have Windows ME, IE and Mcafee and all is updated.
For a little over one week now, almost every time I am
online doing anything, after about 10-15 minutes,
everything locks up. Ctr, Alt, delete will work some times
but the majority of the time it does nothing. Only option
is turn off computer and then scan disk for errors when
turned back on. This may have started right after an
update for IE or Mcafee. I am just not sure. It does seem
that it happens more when I am connected to internet than
just doing offline work. But it did do it when I tried to
do a system restore. When came back on, had error message
that it was unable to restore. When tried to restore
again, no dates were shown on calendar. Now I do not know
what to do. I am not very computer saavy so please explain
how to fix with that in mind. I can however follow pretty
good directions.
Thanks for your help.
Judy Tag: Test access Tag: 265919
Remnants of attack
Got hit bad: viruses, trojans, malware, hijack, you name it...after my
grandson "used" the machine... I had no choice but try to "fix" it!!!
Disconnected from the SP and did a System Restore to the day before
and ran the following first in safe mode, Why? dont know. Ad=Aware SE: had
1 running process, 1 process in reg., and several lesser "things": all
removed.
Ran Spyboot S&D: all ok
Ran Stinger: an hour and 161,476 files later: nothing.
Ran HiJackThis: <g> got a big log (well not that big) and kept it.
Did a complete thorough Virus Scan.
Anything else I could do to improve the speed a little bit, a little bit;
it is slower than "before". also are these files now quarantined genuine WIN
Me= lmgliz.txt, vqzcla.dat.
Also (hate to ask because of the previous question about the Clipboard
Viewer), but the Recycle Bin icon shows full and theres nothing in it, even
if I try to dump something, cant find anything ressembling it in a search.
As always tks in advance.
--
cogito ergo sum Tag: Test access Tag: 265908
Ad-aware [SE1R42] 28.04.2005
<http://aumha.net/viewtopic.php?t=13268>
Links for freeware support included.
Regards,
Silj
--
siljaline
MS - MVP Windows (IE/OE) & Security, AH-VSOP
__________________________________________
Security Tools Updates
http://aumha.net/viewforum.php?f=31
(Reply to group, as return address
is invalid - that we may all benefit) Tag: Test access Tag: 265899
WOOF
Just after I had my interview with ORAL, I interviewed VCA. They seemed
a lot like ORAL and OCA except that they organized vets. I watched the
company and it had problems and went private. Then it came back again
with a new stock symbol WOOF. I have seen them recommended quite a bit
lately--even tho I am skeptical. At the time I interviewed them their
taxes seemed in a terrible mess--made ORAL look good so I told them I
was not available. They had a separate corporation for each practice.
Would have been nice otherwise as they were in walking distance of my
house. They were also an Andersen client. Anyway, saw this about them today.
Shares of VCA Antech (WOOF:Nasdaq - commentary - research) rose 9.3%
after the animal health care company posted first-quarter earnings that
were better than expected. The company posted earnings of $17.2 million,
or 21 cents a share, on sales of $186.9 million. Analysts were expecting
earnings of 19 cents a share on sales of $183.4 million. A year ago the
company earned $14.7 million, or 18 cents a share, on sales of $144.4
million. Looking ahead, VCA now expects full-year earnings of 87 cents
to 89 cents a share on sales of $779 million to $788 million.
Previously, the company expected earnings of 85 cents to 87 cents a
share on sales of $773 million to $786 million. Analysts had been
expecting earnings of 87 cents a share on sales of $782.4 million.
Shares traded up $1.99 to $23.49. Tag: Test access Tag: 265893
AltGr key doesn't work in an MS-DOS window
I've just performed a new install of the U.S. version of the Windows
Me Promotional Step-Up under MS Virtual PC 2004 SP1. I'm using a
French National ("AZERTY") keyboard.
I'm trying to get the French keyboard layout recognized in an MS-DOS
window. I tried following the instructions in MSKB 261417 -- I
launched MSCONFIG.EXE, clicked on the International tab, set the
Keyboard Layout to "fr", and rebooted, but this had no effect. The
keyboard under MS-DOS retained the U.S. layout.
To get the French layout partially recognized under MS-DOS, I found
that the Language ID had to be set to "fr", the Country Code had to be
set to 33, and the Keyboard Data File Name had to read "keyboard.sys"
(without the path). Per MSKB 272719, including the full path prevented
the new layout from being recognized. AFAICT, the following fields had
no effect: MS-DOS Code Page, Country Data File Name, Display Data File
Name, Keyboard Type, and Keyboard Layout.
However, no matter how I configure the International tab, the AltGr
key (the right-Alt key) still does not work and I have no access to
such characters as the backslash (AltGr + 8) or the at-sign (AltGr +
0) in the MS-DOS window. Of course, I can fall back to using the Alt
key codes or copy and paste from Character Map, but this is quite
cumbersome.
How can the AltGr key of the French keyboard be recognized in an
MS-DOS window when using the U.S. version of Windows Me?
regards, Andy
--
**********
Please send e-mail to: usenet (dot) post (at) aaronoff (dot) com
To identify everything that starts up with Windows, download
"Silent Runners.vbs" at www.silentrunners.org
********** Tag: Test access Tag: 265885
How to get to Safe Mode
This is a multi-part message in MIME format.
------=_NextPart_000_015B_01C54BD8.D08B81F0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Hello:
I hate to ask as I know this is a really simplistic and basic question.
I have a Dell Dimension 4100 with WINME. Sometimes it operates erratic =
and I see a lot of advice to run AV etc. in the Safe Mode. I'm drawing =
a blank between my ears and would appreciate if someone would tell me =
which key to push to get to the safe mode.
I do know it needs to be done upon startup when the blue DELL screen =
appears.
Thanks in advance for the advice.
Mike
------=_NextPart_000_015B_01C54BD8.D08B81F0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2900.2627" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial>Hello:</FONT></DIV>
<DIV><FONT face=3DArial></FONT> </DIV>
<DIV><FONT face=3DArial>I hate to ask as I know this is a really =
simplistic and=20
basic question.</FONT></DIV>
<DIV><FONT face=3DArial></FONT> </DIV>
<DIV><FONT face=3DArial>I have a Dell Dimension 4100 with WINME. =
Sometimes=20
it operates erratic and I see a lot of advice to run AV etc. in the Safe =
Mode. I'm drawing a blank between my ears and would appreciate if =
someone=20
would tell me which key to push to get to the safe mode.</FONT></DIV>
<DIV><FONT face=3DArial>I do know it needs to be done upon startup when =
the blue=20
DELL screen appears.</FONT></DIV>
<DIV><FONT face=3DArial></FONT> </DIV>
<DIV><FONT face=3DArial>Thanks in advance for the advice.</FONT></DIV>
<DIV><FONT face=3DArial></FONT> </DIV>
<DIV><FONT face=3DArial>Mike</FONT></DIV></BODY></HTML>
------=_NextPart_000_015B_01C54BD8.D08B81F0-- Tag: Test access Tag: 265878
Temporary Internet Files folder - settings
128 RAM
32.4 GB free space on HD
What's the recommended allowance for the temporary internet files
folder?
The slider on my settings dialogue box goes from zero to 32000MB.
I recently read a post suggesting that it should be set at 20MB.
The reason I ask, is that since reducing the allowance from around
3815MB to 20MB, I seem to to be getting more IE errors.
Does IE error when the allowance is reached? Or does it discard older
files as necessary?
I'd appreciate some feedback on this.
Thanks Tag: Test access Tag: 265864
Re: system font?
Thank you Mart
I tryied to reinstall Marlett.ttf as described in the article, but I don't
know how to delete first the old one installed in Fonts folder.
Anyway, my max/min/restore symbols are actually ok... Could it be a Unicode
font corrupted?
Thanx
Al
-------------------
A long shot ...
Regarding your rectangles instead of characters, if they are also affecting
the Max/min/restore symbols, this is sometimes caused by a missing/corrupted
Marlett font.
Try:- "Description of and Troubleshooting the Marlett TrueType Font"
http://support.microsoft.com/default.aspx?scid=kb;[LN];134861
The article also refers to the maximum number of fonts and the suggestion of
deleting the ttfcache file, which you've already tried without success.
HTH and good luck
Mart Tag: Test access Tag: 265852
Startup Window (DOS) Always Boots
Recently I had to chase a virus using safe mode. Norton gave a couple of
options for getting to safe mode and I chose to take the "msconfig/system
configuration utility/advanced/check enable Startup Menu" route.. It worked,
I got to Safe Mode and the virus was dispatched.
I rebooted and unchecked the "enable Startup Menu". On reboot I still get
the DOS menu with the options to "1. Normal.....3..SafeMode etc...."
I then followed Norton to Microsoft help and found my msdos.sys file. It
did not have an entry for "BootSafe=1" that I could change to "BootSafe=0".
So I added that line, "BootSafe=0" at the top (I think). But it still goes
to the black and white menu on boot up and I still have to choose "Normal"
to finally boot to the WinMe screen.
Appreciate any help! Tag: Test access Tag: 265838
Clipboard Viewer
Hi all
I've been using cut&paste for so long (using Ctrl C & V) just to realized
now that I need the Clipboard Viewer; its not in the System Tools anymore.
Cant be found with Search. I know the program is still there, could use a
link in the Help & Support. Where can I retrieve it?
The reason I want it is to use the "Print Screen key" (which I never
used before...in 4 years. Or is there another way to use that key for a
screen shot. But I'd like to get the Viewer back if possible.
Tks in advance.
--
cogito ergo sum Tag: Test access Tag: 265835
Conflict
It started recently - every once a while a message pops up:
" The system has detected a conflict for IP address ( the address starts
with 192.) with the system having hardware address (00:OC: etc).
The interface has been disabled"
When I press OK everything works fine until it pops up again. Sometimes
frequently.
What is the cause and the cure?
Thanks
Mike A Tag: Test access Tag: 265827
freeze ups
Running a Dell 4100, 60G, 512 RAM. I the last couple of weeks have been
having a lot of trouble with lock up. Most of the time alt.ctrl,delete does
nothing and I have to hit reset and do the scandisk thing. Also when I go to
restart it hangs up. After a while started getting a blue screen and windows
would not load. After a few tries it would sometimes go into safe mode and I
would try system restore with no luck. After feeling it was time to go to the
shop I tried running a startup disk and ran
scanreg /restore and got windows back. alt,ctrl,delete still doesn't work as
well as restart. By the way I didn't think I was going to find this place
after they changed everything
Kelly Smith
kbsmith9@comcast.net Tag: Test access Tag: 265823
SpyBot Defintions Update 27/04/05
<http://aumha.net/viewtopic.php?t=13242>
Silj
--
siljaline
MS - MVP Windows (IE/OE) & Security, AH-VSOP
__________________________________________
Security Tools Updates
http://aumha.net/viewforum.php?f=31
(Reply to group, as return address
is invalid - that we may all benefit) Tag: Test access Tag: 265820
WinMe Suddenly Erratic
am suddenly having a lot of trouble with my Dell desktop (Dimension 4100)
with WinMe and am trying to figure out if there is a WinMe problem
The first signs of trouble came with Netscape, my preferred browser. I
noticed that if I went from the home page (which happened to be
Netscape.com) to Google, I could not actually type anything in the Google
search window. The cursor moved with each keystroke but I could see no
letters. Then I realized that whenever I went from the Netscape home page
to any other the image was incomplete. If text was to be entered I could
not do it. I cannot even access this BB with Netscape--all I could see was
fragments of the entire page! I made sure my antivirus (McAfee) was
up-to-date and ran a scan with negative results. Ran 2 separate adware
programs and got rid of a bundle of junk, but it made no difference. So I
uninstalled and reinstalled Netscape, but the problem is the same. IE runs
a bit better, but not by a lot. It now crashes very easily. While I had
Netscape uninstalled I noticed that links in e-mail would open IE but I
simply ended up with a totally blank page. I played around with Control
Panel to check on Internet Options and that crashed a few times, too. And I
get the Blue Screen of Death every few hours.
Not everything is fouled up. My Microsoft Office programs (Outlook and
Word) seem to work fine. I can also use IE to access my corporate network
using MS Terminal Server and that seems to work pretty well. But something
is badly wrong!
I backed up the computer to an external hard drive a day ago, so I can
restore the whole computer (or so they say at Iomega and Norton). The
downside is that I have preserved something that is not working very well!
Any suggestions?
--
Joe McGuire
mcguirejw@comcast.net Tag: Test access Tag: 265819
After Me froze, all I see is my wallpaper
My Me machine froze so I had to cold boot it. After I did so, it starts fine
but all I see is my desktop wallpaper and all I can do is ctrl-alt-del. No
other functionality is available.
I tried to reinstall Me but it fails at 65% every time.
Any idea? Tag: Test access Tag: 265813
Can Windows ME be upgraded to XP?
I can buy a two year old Compaq, 40 gig, with ME for $100. It runs fine,
except for all the crap software that needs to be cleaned-up. I don't know
anything about ME compatibility, though, with current software and the XP
market. What are the issues? Is it possible and easiest to simply upgrade
to XP? Tag: Test access Tag: 265808
How do I clear the History/Auto-Complete in Run search?
Hi
How do I get rid of the auto-complete/history that shows up?
I got MRU-Blaster to clear it in Search Files but I noticed it doesn't clear
them in Run. I have all the boxes checked on MRU-Blaster.
Any help appreciated.
Thanks
RR Tag: Test access Tag: 265797
Extra large print on some internet
Sometimes the print is so large on an internet website all the letters
overlap themselves - is it the browser I am using or a graphics problem or
??? thank you Tag: Test access Tag: 265789
Blue Screen Error Message
Lately I have been getting the following blue screen error at start-up.
Whether related or not, I am also having "out of memory" problems now and the
maximum amount of memory is installed for this PC. Nothing new has been
installed but I cannot run the same programs in tandem anymore.
The error message is:
SYM Event (01) + 00010AE6 Error: 0E : 0028 : C00D1A1A
Then the standard "Press any key to continue"
Then none of the other programs will load following my pressing any key. Am
assuming this is a Symantec error but nothing shows at their site, no virus
showing on system.
Please advise. Thank you Tag: Test access Tag: 265785
white inactive desktop
Recently on the few occasions that my screeen freezes, ctl+alt+del (2x)
restarts the computer, but instead of going to the normal active desktop the
system assumes I have (crash) shutdown the sytem and I get the "white
backgrounded inactive desktop".
Why is this occuring and I how can I prevent it?
Thanks
--
vince Tag: Test access Tag: 265770
1066 monografias 1066
Monografias completas a partir de 250,00 !
monografia administração direito turismo economia letras pedagogia
monografias teses tese.
Sua monografia a partir de 250,00
http://monografiadireta.rg3.net Tag: Test access Tag: 265762
2636 monografia monografias teses =?ISO-8859-1?Q?disserta=E7=F5es?=
Monografias completas a partir de 250,00 !
monografia administração direito turismo economia letras pedagogia
monografias teses tese.
Sua monografia a partir de 250,00
http://monografiadireta.rg3.net Tag: Test access Tag: 265757
system font?
Hi everybody
In certain parts of applications like OE, instalation wizards, etc, I get
displayed rectangles instead of characters.
I guess there's a trouble with the system fonts, but I don't what exactly is
going on. I tryed to fix it deleting ttfCache (in safe mode) and with
TweakUI, but nothing changes.
I'm not sure, but I think this began when I installed some new fonts. The
solution would be to delete the "problematic" font? Which could be that one?
Thank you
Al
P.S. Don't know if this helps, but just in case, I've pasted the .fon font
names I have installed
app932
vga850
8514fix
8514oem
8514sys
courf
dosapp
modern
serife
seriff
smalle
smallf
sserife
sseriff
symbole
symbolf
vgafix
vgaoem
vgasys
wst_czec
wst_engl
wst_fren
wst_germ
wst_ital
wst_span
wst_swed Tag: Test access Tag: 265756
Ping Jack E. Martinelli KB891711 issue
You can tell the MS team working on the issue that the ME computer I work on
with the KB891711 problem [for the second time] is a Dell bought in the
year 2000 loaded with ME. The monitor is a Dell also so I am guessing it is
a standard card and monitor setup they were selling at the time. The person
who owns the computer has never updated any drivers.
[ I've received a request from the team that's working on the
KB891711 issue. They would like everyone in the USA who has had problems
with KB891711 to call 1-866-PCSafety (1-866-727-2338). If you can help
them with some info, they say they're close to reproducing the
problem--first step toward solving it. I have asked for, though not yet
received, assurances that callers will be taken more seriously than has
been reported thus far. ] Tag: Test access Tag: 265752
KB891711 UPdate AGAIN! Whats the matter with Microsoft?
I just came back from fixing a disabled lady's ME computer because it auto
updated with the defective Microsoft Update KB891711.exe and Q891711.DLL
again.
How can I fix the update manager so it does NOT download and install that
update again? Tag: Test access Tag: 265749
Replace missing registry keys?
I'm not sure to be in the right forum, but ask anyway and take it from
there:
The diagnostic tool of directx has found numerous registry errors in the
HKCR/CLSID Keys.
How can this situation be resolved?
Harry. Tag: Test access Tag: 265735