System error

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - MSIMN Error Msimn has caused an error in SHLWAPI.DLL. This probably was discussed before, but I need a refresher course. What is the cause of this error and how to fix? Appreciate any thoughts. Harry. Tag: System error Tag: 266214
  - 2
    - Networking Me and XP Hi all, The ol' Me box is now hooked to a Linksys BEFSR41 wired router to my cable modem, along with the new XP box. I have a new Lexmark P6250 printer directly connected to the Me box. Question: Is there a way to share files and printer between the two boxes without opening myself to the 'wilds' of the Net?? I have tried a number of things, to include the Networking Wizard in Me and XP. Me tells me that the networking will work with a Win95 or Win98 box and the XP Wizard warns me that opening file and printer sharing will allow the world to get into my computer/printer. Is this true, since I am behind the router?? Also, I am no longer getting auto System Restore points. I have checked for the presence of a <wininit.ini> file and reset System Restore. It did create a point upon rebooting, but, nothing since I did this two days ago. ZAPro was updated to version 5.5.094.000 about the same time the router and new printer was installed.....may have done too much, too fast, too soon. Heirloom, old and sorry about two topics in one post Tag: System error Tag: 266204
  - 3
    - HijackThis Latest version of Hijackthis stops/hangs while scanning. using ctrl+alt+del key stops it. what goes wrong? Not working in sage mode either. Farhan Tag: System error Tag: 266199
  - 4
    - ScanDisk and Bad Sectors After reformatting my HD and reinstalling WinMe with updates I ran ScanDisk. It would not run in the Normal Mode (after many hours it rpoerted that it tried 10 times but something started writing to the drive, according to the message). I then ran in in Safe Mode with a check mark for repairing errors--took well over 24 hours--and it gave me a mystifying report. If says it found no errors. It reported in round numbers 78,000,000 KB total disk space (I have an 80 GB disk) and 8,600,520 bytes in "bad sectors." What does this mean? Is my HD shot? Do I have to fix something? Call Dell? Could this explain why I was having so much trouble in the first place (OK, that is too open-ended) Tag: System error Tag: 266182
  - 5
    - Windows Update kills Roxio? I just tried to use my Roxio software to burn a CD. First time I've used it in a month or so. Upon starting Creator Classic I got: Microsoft Visual C++ Runtime Library Runtime Error! Program: ...LES\ROXIO\EASY CD CREATOR 6\EASY CD CREATOR\CREATORC.EXE abnormal program termination followed by: Creatorc Creatorc has caused an error in CREATOR.DLL Creatorc will now close. If you continue to experience problems, try restarting your computer. Of course, restarting doesn't help. But upon tracking down CREATOR.DLL I found files by that name in both: C:\Program Files\Adaptec Shared\CreatorAPI\ C:\Program Files\Roxio Shared\CreatorAPI\ The ones in "Adaptec Shared" dated 04\30\05, those in Roxio Shared dated (mostly) 11/26/04. When I saved the ones in "Adaptec Shared" and replaced them with those in "Roxio Shared" the program now starts and runs, though I get the second error above upon exit. Since I haven't run the Roxio update utility for months, I'm assuming the ones in Adaptec Shared came in via Windows Update or, perhaps, when I updated Media Player to version 9. The question is, has anyone else experienced this failure, and do you have a more reasonable, or maybe more complete, way around it than what I've done? I did save the 04/30/05 files, so I can put them back. - Bill Tag: System error Tag: 266142
  - 6
    - Interesting article I don't know how many of you saw this so I thought I'd post the link here, saw it in the XP ng's this morning. http://www.microsoft.com/presspass/features/2005/may05/05-02YoungMCP.asp Joan Tag: System error Tag: 266132
  - 7
    - Recycle bin is missing Hi. I recently turned on my computer and found that the windows Me recycle bin shortcut icon was gone from the desktop. I did a search of files and folders for recycle bin and found nothing. I looked in the windows directory and could not find a folder marked recycle bin. I clicked on properties for the desktop and went to effects,highlited recycle bin full, then clicked on default still no shortcut on the desktop. I tried the same for the recycle bin empty...nothing. How do I find the short cut icon ? If it has been deleted how do I re install it? Is this a common glitch with Me? I didn't think windows would allow the shortcut for Recycle bin to be deleted. But mine sure is gone. Thanks, Dave Ohler Tag: System error Tag: 266130
  - 8
    - MSDOS.SYS file missing I'm using MS article Q258471 to troubleshoot a boot problem. The computer only boots into DOS mode, and only if I use a system startup disk. (I get an "Error while initializing device IFSMGR" screen when I boot into Windows.) However, I can't find an msdos.sys file anywhere on the disk, including the %RootDir%. I have a second WinMe computer that doesn't have an msdos.sys file either, all though that system boots fine. I read that msdos.sys is created during the Windows installation process. What would cause the msdos.sys file to be missing from both of my WinME systems? And, if it's necessary to boot into Windows, why does one of my computes boot without it? Can an msdos.sys file be created manually? If so, how? Is there some way to retrieve a copy from somewhere else, or extract it from the installation disk? Tag: System error Tag: 266125
  - 9
    - missing components in Windows Setup I've noticed when in the "windows setup" from the add\remove section that there are no components(empty) listed at all. I do get an error message stating "Rundll32 has caused an error in setupx.dll". What could have caused this, and how do I get these entries back? I have tried a varldid.reg installation and have also tried a system restore to no avail. Tag: System error Tag: 266116
  - 10
    - Test access This is a test post - new email program Tag: System error Tag: 266114
  - 11
    - spool32 error I've looked at other methods to fix this, but they don't seem to apply or work. First off, I installed a new HP printer and shortly after that I would get error messages such as: Spool32 has caused an error in KERNEL.dll or Spool32 has caused an error in <unknown>. I uninstalled my old printers drivers, didn't help. Booted up in safe mood/clean boot and even then I would often get the spool32 error box to show up. I went into my spool folder and found nothing in the PRINTERS folder. I cleaned out the TEMP folder. Still getting the same error on startup. I can't print if I close the error box that shows up on startup. The error box shows up when I want to open my Printers folder in my Control Panel. I've tried printing directly to the printer. I've ran out or tried just about all the possible solutions I have seen. The error box shows up everytime I boot and am ready to use my PC. Thanks in advance for your help. Tag: System error Tag: 266111
  - 12
    - Comm port invalid or busy HELP! I've tried almost everything listed on these message boards to resolve my comm port problem. I have Windows XP. AOL 9.0. I use my modem for dial-up when away from home. It runs (or used to) on comm port 3. I use broadband at home. Until last week, both dial-up and broadband worked fine. Then, all of a sudden, I couldn't dial-out anymore...receiving the dreaded message "com port invalid or busy". I haven't added new hardware or software. Broadband still works fine. I've checked all my devices for conflicts and/or problems. All are fine. I've uninstalled the Toshiba modem, and reinstalled. Modem diagnostics say it's working fine. Changed serialkey settings. Didn't help. I've deleted, changed, updated the AOL Adapter. I'm ready to throw this laptop out the window!! Anybody have ideas for resolution? Tag: System error Tag: 266090
  - 13
    - Scandisk/defragmentation I did a scan disk in safe mode and it seems to stop 1/4 mark, so I decided I will do deframentration then, Initially, the defragmentation process is ok until it give this error message "Window cannot defrag this drive bcos it cannot access part of drive. To repair your drive, click scandisk (choose thorough option) and try defragmentation again. ID# Defrag005" So I try to do the scasndisk and it would even start. So I power off the button and restart. Since it did not shut down the proper manner, it usually try to scan the disk which it again did not start and give this message" Msgsrv32 has caused an error in KRNL.386.exe. Msgsrv32 will now close. If you continue to experience the problem, try restarting your pc." Hdd Masxtor 40 gb, model 34098H4. Any idea what can I do, dont tell me that the hdd is gone///// Tag: System error Tag: 266089
  - 14
    - SpywareBlaster Update (May 02) New one which adds 20 more to the program. Just update from within it. Cheers......Heather Tag: System error Tag: 266084
  - 15
    - wi32.exe I have a file wi32.exe in my startup list, What is this? Is it save to have there? Farhan Tag: System error Tag: 266082
  - 16
    - ie6 losing custom shortcuts I re-downloaded/reinstalled ie6, turned on 'inline autocomplete' option like somebody suggested, but ie6 still loses all my custom key shortcuts (ctl-alt-whatever) when the pc is rebooted. Any ideas? thanks Tag: System error Tag: 266059
  - 17
    - microtrend-page cannot be display properly This Millinnium pc has never been updated before, Thought doi an on line scan first and when I try to download the housecall definitions, its says the page cannot be display properly because of the setting. the is a cross in a small box on the page. Any idea whats is missing. I have set the IE security setting to default but it does not help. Now decided to Windows update first and there is no problem. Any idea how to get the housecall display properly, thanks Tag: System error Tag: 266057
  - 18
    - Desktop has gone black I don't know if this was caused by a virus or not but my wallpaper has gone and my desktop is completely black. It still has icons and they work. When I right click on the desktop I no longer get the popup menu I used to get. I get a simple one allowing me to select a screensaver and size settings. I cannot select wallpaper and my active desktop options are gone. Does anyone know what files might be corrupt and need replacing? Any other ideas would be appreciated. Tag: System error Tag: 266008
  - 19
    - Problem with Floppy drive I'm having a problem my A:\ or my floppy drive. I am trying to access delindex via a floppy disk and when inserted into the drive on reboot, the computer disregards whatever is in the floppy drive and continues to boot into windows. Once in windows I would right click on floppy drive icon and then click onto explore, and an error message stating "A:\ is not accessible. The system cannot read from the specified device". I would then try to run scandisk on the A:\ drive with more errors stating "Scandisk detected an error while reading your drive. Scandisk detected an error while writing to your drive". The computer would then freeze. I've tried using different floppies and also tried to update the floppy disk controller from device manager to no avail. Can anyone offer some advice on troubleshooting this problem? The floppy is my only means to get into DOS on windows Me. Thanks. Tag: System error Tag: 265990
  - 20
    - New power supply needed Was in the process of installing wireless card to winME. System has been disconnected/no power for sometime due to office renovation. Plugged everything back up - guess what, no power. Took the cover off, no smell or scorch marks that I can see. My guess is a new power supply, but just want to be sure before I go out and buy one. Thanks much! -- Penni Hillsborough, NC Tag: System error Tag: 265989
  - 21
    - NTLDR is missing !! Please help Ok, My sons computer won't boot I keep getting the NTLDR is missing press any key to restart. So I go through support on the web and obviously I need a Windows/ME boot disk. Well I don't have one and I can't open the cd rom either because of the problem. I need a start up disk to get into the system and fix the ntldr file. If you can help and possibly lead me in the right direction if I have run astray I would appreciate it. Please email me at jzachary@zaxpax.com thanks Jan Tag: System error Tag: 265987
  - 22
    - Control Panel is Empty Hi All, I have a Toshiba 2800 with win me. when i open the control panel, the window is empty however, in the bottom left corner it tells me there are items but I cannot see them. The same occurs when i click on my computer, i see the floppy and cd and c drive, but when i click on the c drive, i get an empty window and again it says in the bottom corner, xx items. what's wrong with my ME? Lorne Tag: System error Tag: 265977
  - 23
    - "A requrired DLL file, MFC42.dll, was not found" I have been errors in Windows ME lately, requiring scandisk fixes. No, when I try to run three different programs, I am getting the error message, "A requrired DLL file, MFC42.dll, was not found." I know there are websites that will provide DLL files. Should I just try to dowload the MFD42.dll file? Or, does this error message indicate some other problem? If so, I will appreciate advice. Tag: System error Tag: 265972
  - 24
    - Dial-Up Connection using BY Yahoo! Anytime and BTBBroadband My internet connection on BT Yahoo Anytime unsing Connexant HSSF V92 56K RTAD Speakerphone Modem on COM3 was faultfree. When I tried to transfer to BT Basic Broadband sing BT Voyager 105 ADSL Modem my Standard Dialup was transferred to BT PayasyouGo Dial Up which I intended to use as a back-up of Broadband failed. On trying to install BT Broadband I continually found "Dial Up Modem not found". Whenever I tried to connect to Broadband the low speed dia; up mem was connected instead even thoughthe BT Broadband was "default". In the end I got BT Broadband connected by removing the Dial-Up from the Control Panel. The connection worked until the computer was shut down when the Broadband connection would fail and the only way to restore it was to insert the BT Broadband CD and run the dslsetup.exe and reinstall thje Voyager Drivers over the old ones. The powered up reboot could be used without trouble. I then restored the Dial-Up to the Control Panel after uninstalling the BT PayasyouGo. Once again the system worked correctly but I now lose the Broadband connection (if try to connect get "Dial-Up modem not found") and can only restore by rerunning dslsetup.exe. Please advise: 1. How to obtain connection which will maintain the computer on BT Basic Broadband after both rebooting and repowering computer. 2. How to still have a backup low speed connection of Broadband fails. Thanks Martin Tag: System error Tag: 265952
  - 25
    - CTRL+ALT+DEL loop My cousin just purchased a used comp the o s is windows ME. After install a spy/adware removal progam, everything is fine UNTIL, the last 1 % of the removal process. the comp restarts, has a blue screen with the usual 2 options, " press any key or ctrl+alt+del..." however this was not suppose to happen. had to completely shut down the power to the unit in order to do anything. when i'd press "any key" it'd go back to the "LOOP". when i'd press "ctrl+alt+del" it'd go back to the "LOOP". plus have the following error message 0E : 0197 : BFF7834F. I'm about ready to shread the comp. -- truckrwolf Tag: System error Tag: 265949
- Next
  - 1
    - ID of C_Restore files Good morning, afternoon or evening (as the case may). After my last visit, as I mentioned at the time, I was able to recover 3GB of space. I know this is not a lot to those that have 100GB+ drive but when you have only 20GB, it's a big deal. Since then I have been watching this particular folder and I am wondering if I could get a bit of insight about the files. I am currently running the following: Win Me 4.90.3000, IE 5.50.4807.2300 with my trusty Outlook Express. My startups are ZA 2.6.362, Spyblocker 5.0 and AVG 7.0.308. In my restore/archive folder, as of 04/29/2005, I have FS1.cab through FS9.cab and RG42682079.cab through RG4272378c.cab. These files total 152MB. I flushed this folder 04/21/2005. My questions. 1. What do the FS and RG zip files represent? 2. Should I be generating these files in this way at this pace? 3. Do I need to reset some switches and if so which ones? Thank you in advance for your help. Rita Tag: System error Tag: 265945
  - 2
    - tv newsgroups Problem restoring newsgroups.Need configuration. What do I do? Tag: System error Tag: 265932
  - 3
    - Error in <unknown> My PC suddenly face a error message during startup. the message is this: Scandskw has caused an error in <unknown>. Scandskw will now close. After all my PC cannot go into windows, plz help, thanks. My PC system is P3 Windows ME OEM. Tag: System error Tag: 265922
  - 4
    - system resource management Is there any good free programs that release system resources after a program has been closed? I understand that many programs keep a hold of system resources even after you shut them down. -- -Jesse Tag: System error Tag: 265920
  - 5
    - Windows Me freezes up while connected to internet I have Windows ME, IE and Mcafee and all is updated. For a little over one week now, almost every time I am online doing anything, after about 10-15 minutes, everything locks up. Ctr, Alt, delete will work some times but the majority of the time it does nothing. Only option is turn off computer and then scan disk for errors when turned back on. This may have started right after an update for IE or Mcafee. I am just not sure. It does seem that it happens more when I am connected to internet than just doing offline work. But it did do it when I tried to do a system restore. When came back on, had error message that it was unable to restore. When tried to restore again, no dates were shown on calendar. Now I do not know what to do. I am not very computer saavy so please explain how to fix with that in mind. I can however follow pretty good directions. Thanks for your help. Judy Tag: System error Tag: 265919
  - 6
    - UTF-8 When should "Always send URLs as UTF-8 (requires restart)" be checked? Thank you. Harry. Tag: System error Tag: 265912
  - 7
    - Remnants of attack Got hit bad: viruses, trojans, malware, hijack, you name it...after my grandson "used" the machine... I had no choice but try to "fix" it!!! Disconnected from the SP and did a System Restore to the day before and ran the following first in safe mode, Why? dont know. Ad=Aware SE: had 1 running process, 1 process in reg., and several lesser "things": all removed. Ran Spyboot S&D: all ok Ran Stinger: an hour and 161,476 files later: nothing. Ran HiJackThis: <g> got a big log (well not that big) and kept it. Did a complete thorough Virus Scan. Anything else I could do to improve the speed a little bit, a little bit; it is slower than "before". also are these files now quarantined genuine WIN Me= lmgliz.txt, vqzcla.dat. Also (hate to ask because of the previous question about the Clipboard Viewer), but the Recycle Bin icon shows full and theres nothing in it, even if I try to dump something, cant find anything ressembling it in a search. As always tks in advance. -- cogito ergo sum Tag: System error Tag: 265908
  - 8
    - Ad-aware [SE1R42] 28.04.2005 <http://aumha.net/viewtopic.php?t=13268> Links for freeware support included. Regards, Silj -- siljaline MS - MVP Windows (IE/OE) & Security, AH-VSOP __________________________________________ Security Tools Updates http://aumha.net/viewforum.php?f=31 (Reply to group, as return address is invalid - that we may all benefit) Tag: System error Tag: 265899
  - 9
    - WOOF Just after I had my interview with ORAL, I interviewed VCA. They seemed a lot like ORAL and OCA except that they organized vets. I watched the company and it had problems and went private. Then it came back again with a new stock symbol WOOF. I have seen them recommended quite a bit lately--even tho I am skeptical. At the time I interviewed them their taxes seemed in a terrible mess--made ORAL look good so I told them I was not available. They had a separate corporation for each practice. Would have been nice otherwise as they were in walking distance of my house. They were also an Andersen client. Anyway, saw this about them today. Shares of VCA Antech (WOOF:Nasdaq - commentary - research) rose 9.3% after the animal health care company posted first-quarter earnings that were better than expected. The company posted earnings of $17.2 million, or 21 cents a share, on sales of $186.9 million. Analysts were expecting earnings of 19 cents a share on sales of $183.4 million. A year ago the company earned $14.7 million, or 18 cents a share, on sales of $144.4 million. Looking ahead, VCA now expects full-year earnings of 87 cents to 89 cents a share on sales of $779 million to $788 million. Previously, the company expected earnings of 85 cents to 87 cents a share on sales of $773 million to $786 million. Analysts had been expecting earnings of 87 cents a share on sales of $782.4 million. Shares traded up $1.99 to $23.49. Tag: System error Tag: 265893
  - 10
    - AltGr key doesn't work in an MS-DOS window I've just performed a new install of the U.S. version of the Windows Me Promotional Step-Up under MS Virtual PC 2004 SP1. I'm using a French National ("AZERTY") keyboard. I'm trying to get the French keyboard layout recognized in an MS-DOS window. I tried following the instructions in MSKB 261417 -- I launched MSCONFIG.EXE, clicked on the International tab, set the Keyboard Layout to "fr", and rebooted, but this had no effect. The keyboard under MS-DOS retained the U.S. layout. To get the French layout partially recognized under MS-DOS, I found that the Language ID had to be set to "fr", the Country Code had to be set to 33, and the Keyboard Data File Name had to read "keyboard.sys" (without the path). Per MSKB 272719, including the full path prevented the new layout from being recognized. AFAICT, the following fields had no effect: MS-DOS Code Page, Country Data File Name, Display Data File Name, Keyboard Type, and Keyboard Layout. However, no matter how I configure the International tab, the AltGr key (the right-Alt key) still does not work and I have no access to such characters as the backslash (AltGr + 8) or the at-sign (AltGr + 0) in the MS-DOS window. Of course, I can fall back to using the Alt key codes or copy and paste from Character Map, but this is quite cumbersome. How can the AltGr key of the French keyboard be recognized in an MS-DOS window when using the U.S. version of Windows Me? regards, Andy -- ********** Please send e-mail to: usenet (dot) post (at) aaronoff (dot) com To identify everything that starts up with Windows, download "Silent Runners.vbs" at www.silentrunners.org ********** Tag: System error Tag: 265885
  - 11
    - How to get to Safe Mode This is a multi-part message in MIME format. ------=_NextPart_000_015B_01C54BD8.D08B81F0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hello: I hate to ask as I know this is a really simplistic and basic question. I have a Dell Dimension 4100 with WINME. Sometimes it operates erratic = and I see a lot of advice to run AV etc. in the Safe Mode. I'm drawing = a blank between my ears and would appreciate if someone would tell me = which key to push to get to the safe mode. I do know it needs to be done upon startup when the blue DELL screen = appears. Thanks in advance for the advice. Mike ------=_NextPart_000_015B_01C54BD8.D08B81F0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Diso-8859-1"> <META content=3D"MSHTML 6.00.2900.2627" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=3D#ffffff> <DIV><FONT face=3DArial>Hello:</FONT></DIV> <DIV><FONT face=3DArial></FONT> </DIV> <DIV><FONT face=3DArial>I hate to ask as I know this is a really = simplistic and=20 basic question.</FONT></DIV> <DIV><FONT face=3DArial></FONT> </DIV> <DIV><FONT face=3DArial>I have a Dell Dimension 4100 with WINME.  = Sometimes=20 it operates erratic and I see a lot of advice to run AV etc. in the Safe = Mode.  I'm drawing a blank between my ears and would appreciate if = someone=20 would tell me which key to push to get to the safe mode.</FONT></DIV> <DIV><FONT face=3DArial>I do know it needs to be done upon startup when = the blue=20 DELL screen appears.</FONT></DIV> <DIV><FONT face=3DArial></FONT> </DIV> <DIV><FONT face=3DArial>Thanks in advance for the advice.</FONT></DIV> <DIV><FONT face=3DArial></FONT> </DIV> <DIV><FONT face=3DArial>Mike</FONT></DIV></BODY></HTML> ------=_NextPart_000_015B_01C54BD8.D08B81F0-- Tag: System error Tag: 265878
  - 12
    - Temporary Internet Files folder - settings 128 RAM 32.4 GB free space on HD What's the recommended allowance for the temporary internet files folder? The slider on my settings dialogue box goes from zero to 32000MB. I recently read a post suggesting that it should be set at 20MB. The reason I ask, is that since reducing the allowance from around 3815MB to 20MB, I seem to to be getting more IE errors. Does IE error when the allowance is reached? Or does it discard older files as necessary? I'd appreciate some feedback on this. Thanks Tag: System error Tag: 265864
  - 13
    - Bad Sectors Remover Is there any bad sector remover available for free(preferable)/purchase. Farhan Tag: System error Tag: 265862
  - 14
    - Re: system font? Thank you Mart I tryied to reinstall Marlett.ttf as described in the article, but I don't know how to delete first the old one installed in Fonts folder. Anyway, my max/min/restore symbols are actually ok... Could it be a Unicode font corrupted? Thanx Al ------------------- A long shot ... Regarding your rectangles instead of characters, if they are also affecting the Max/min/restore symbols, this is sometimes caused by a missing/corrupted Marlett font. Try:- "Description of and Troubleshooting the Marlett TrueType Font" http://support.microsoft.com/default.aspx?scid=kb;[LN];134861 The article also refers to the maximum number of fonts and the suggestion of deleting the ttfcache file, which you've already tried without success. HTH and good luck Mart Tag: System error Tag: 265852
  - 15
    - Startup Window (DOS) Always Boots Recently I had to chase a virus using safe mode. Norton gave a couple of options for getting to safe mode and I chose to take the "msconfig/system configuration utility/advanced/check enable Startup Menu" route.. It worked, I got to Safe Mode and the virus was dispatched. I rebooted and unchecked the "enable Startup Menu". On reboot I still get the DOS menu with the options to "1. Normal.....3..SafeMode etc...." I then followed Norton to Microsoft help and found my msdos.sys file. It did not have an entry for "BootSafe=1" that I could change to "BootSafe=0". So I added that line, "BootSafe=0" at the top (I think). But it still goes to the black and white menu on boot up and I still have to choose "Normal" to finally boot to the WinMe screen. Appreciate any help! Tag: System error Tag: 265838
  - 16
    - Clipboard Viewer Hi all I've been using cut&paste for so long (using Ctrl C & V) just to realized now that I need the Clipboard Viewer; its not in the System Tools anymore. Cant be found with Search. I know the program is still there, could use a link in the Help & Support. Where can I retrieve it? The reason I want it is to use the "Print Screen key" (which I never used before...in 4 years. Or is there another way to use that key for a screen shot. But I'd like to get the Viewer back if possible. Tks in advance. -- cogito ergo sum Tag: System error Tag: 265835
  - 17
    - no send to When I right click, I don't have Send to floppy A, or send to briefcase. What can I do? -- B.H.J. Tag: System error Tag: 265831
  - 18
    - Conflict It started recently - every once a while a message pops up: " The system has detected a conflict for IP address ( the address starts with 192.) with the system having hardware address (00:OC: etc). The interface has been disabled" When I press OK everything works fine until it pops up again. Sometimes frequently. What is the cause and the cure? Thanks Mike A Tag: System error Tag: 265827
  - 19
    - freeze ups Running a Dell 4100, 60G, 512 RAM. I the last couple of weeks have been having a lot of trouble with lock up. Most of the time alt.ctrl,delete does nothing and I have to hit reset and do the scandisk thing. Also when I go to restart it hangs up. After a while started getting a blue screen and windows would not load. After a few tries it would sometimes go into safe mode and I would try system restore with no luck. After feeling it was time to go to the shop I tried running a startup disk and ran scanreg /restore and got windows back. alt,ctrl,delete still doesn't work as well as restart. By the way I didn't think I was going to find this place after they changed everything Kelly Smith kbsmith9@comcast.net Tag: System error Tag: 265823
  - 20
    - SpyBot Defintions Update 27/04/05 <http://aumha.net/viewtopic.php?t=13242> Silj -- siljaline MS - MVP Windows (IE/OE) & Security, AH-VSOP __________________________________________ Security Tools Updates http://aumha.net/viewforum.php?f=31 (Reply to group, as return address is invalid - that we may all benefit) Tag: System error Tag: 265820
  - 21
    - WinMe Suddenly Erratic am suddenly having a lot of trouble with my Dell desktop (Dimension 4100) with WinMe and am trying to figure out if there is a WinMe problem The first signs of trouble came with Netscape, my preferred browser. I noticed that if I went from the home page (which happened to be Netscape.com) to Google, I could not actually type anything in the Google search window. The cursor moved with each keystroke but I could see no letters. Then I realized that whenever I went from the Netscape home page to any other the image was incomplete. If text was to be entered I could not do it. I cannot even access this BB with Netscape--all I could see was fragments of the entire page! I made sure my antivirus (McAfee) was up-to-date and ran a scan with negative results. Ran 2 separate adware programs and got rid of a bundle of junk, but it made no difference. So I uninstalled and reinstalled Netscape, but the problem is the same. IE runs a bit better, but not by a lot. It now crashes very easily. While I had Netscape uninstalled I noticed that links in e-mail would open IE but I simply ended up with a totally blank page. I played around with Control Panel to check on Internet Options and that crashed a few times, too. And I get the Blue Screen of Death every few hours. Not everything is fouled up. My Microsoft Office programs (Outlook and Word) seem to work fine. I can also use IE to access my corporate network using MS Terminal Server and that seems to work pretty well. But something is badly wrong! I backed up the computer to an external hard drive a day ago, so I can restore the whole computer (or so they say at Iomega and Norton). The downside is that I have preserved something that is not working very well! Any suggestions? -- Joe McGuire mcguirejw@comcast.net Tag: System error Tag: 265819
  - 22
    - After Me froze, all I see is my wallpaper My Me machine froze so I had to cold boot it. After I did so, it starts fine but all I see is my desktop wallpaper and all I can do is ctrl-alt-del. No other functionality is available. I tried to reinstall Me but it fails at 65% every time. Any idea? Tag: System error Tag: 265813
  - 23
    - Can Windows ME be upgraded to XP? I can buy a two year old Compaq, 40 gig, with ME for $100. It runs fine, except for all the crap software that needs to be cleaned-up. I don't know anything about ME compatibility, though, with current software and the XP market. What are the issues? Is it possible and easiest to simply upgrade to XP? Tag: System error Tag: 265808
  - 24
    - How do I clear the History/Auto-Complete in Run search? Hi How do I get rid of the auto-complete/history that shows up? I got MRU-Blaster to clear it in Search Files but I noticed it doesn't clear them in Run. I have all the boxes checked on MRU-Blaster. Any help appreciated. Thanks RR Tag: System error Tag: 265797
  - 25
    - Extra large print on some internet Sometimes the print is so large on an internet website all the letters overlap themselves - is it the browser I am using or a graphics problem or ??? thank you Tag: System error Tag: 265789

Hi.
Since a few days a lot of applications are showing some error regarding
kernel32.dll
that so and so program caused an error in that dll.Is it possible to replace
kernel32.dll? Audio programs like winamp and real are unable to play mp3's
and others stating the absence of an audio device when actually there's
one.Please also tell me what kind of operations cause these kind of problems.

Thanking you and earnestly waiting for your reply!!!!!

Top

Re: System error by Joan

Joan
Thu May 05 15:17:25 CDT 2005

See if anything here helps.
Joan

Troubleshooting Kernel32.dll errors (JAE):
http://aumha.org/a/k32fix.htm
Troubleshooting Kernel32.dll errors:
http://www.all-windows.com/kernel32.html
Iexplore caused an invalid page fault in KERNEL32.DLL
http://inetexplorer.mvps.org/answers.htm#kernel32

Sunny wrote:
> Hi.
> Since a few days a lot of applications are showing some error
> regarding kernel32.dll
> that so and so program caused an error in that dll.Is it possible to
> replace kernel32.dll? Audio programs like winamp and real are unable
> to play mp3's and others stating the absence of an audio device when
> actually there's one.Please also tell me what kind of operations
> cause these kind of problems.
>
> Thanking you and earnestly waiting for your reply!!!!!

Top