Direct X9.0b runtime for end users

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - startup I don't know whats going on with my computer but when I went to turn it on yesterday it stopped everything it was doing at the "Windows ME" screen. I tried starting in safe mode and nothing happened. It was running fine a couple days ago. Please help. the email is bamurr217@yahoo.com Thanks!!! Tag: Direct X9.0b runtime for end users Tag: 243668
  - 2
    - KDPO599.dll message While trying to open my documents, or my computer, i get this error message. Or I get Shell32.dll and ShLwapi.dll I have never seen this. And i have a problem with my keyboard not funtioning . I have updated and ran antivirus and spyware. No virus found. I tried to reinstall windows, but lose keyboard function to enter a number..Help? Tag: Direct X9.0b runtime for end users Tag: 243661
  - 3
    - wtoolsa error message how do I get rid of the pop up message that says wtoolsa has caused an error in kernel32.dll I can close the box, but it reappears in a few seconds thank to anyone that can tell me how to get rid of this annoying pop-up message this is in windows me Tag: Direct X9.0b runtime for end users Tag: 243656
  - 4
    - loading aol broadband I'm trying to load aol broadband but at acertain point it stops and prompts --The file 'glausb sys@ was not found-- also "Windows needs the disk labled 'globespan USB LAN Driver diskette to continue. Aol reckon that I need the software loading onto my system. Can anyone tell me what I need to do ? You will have guessed that I'm a techno moron ( my excuse is that im over 50 ) My email is -stephenrowley48@hotmail.com Please help! steve Tag: Direct X9.0b runtime for end users Tag: 243654
  - 5
    - Arjen Jongeling, een oude bekende Hoewel, Arjen Jongeling is hier nog nooit geweest en ik denk dat Arjen Jongeling hier ook nooit meer zal terugkomen. Sterker nog, Arjen Jongeling zit hier helemaal fout. Maar ja, het doet het goed in de Google archieven. Tag: Direct X9.0b runtime for end users Tag: 243653
  - 6
    - deleting all data except OS I am giving an older laptop away and I wanted to wipe all the programs and data off the hard drive. I didn't want to format and then reload all the drivers, do the updates, etc. Is there an easier way? Tag: Direct X9.0b runtime for end users Tag: 243647
  - 7
    - OT---new Adaware file new Adaware file available........... Heirloom, old and did I make it? Tag: Direct X9.0b runtime for end users Tag: 243639
  - 8
    - Tapisrv error in Rpct4.dll Tapisrv has caused an erro in RPCT4.dll i got the above error message but dunno wat's it, anyone can help?? Tag: Direct X9.0b runtime for end users Tag: 243637
  - 9
    - Explorer has caused an error.... I just had a new motherboard & processor put in this thing. Prior to that, there were "Explorer has caused an error in ...." various different messages. Now supposedly this PC was loaded with an updated version of Windows ME, and now with every start up, there are quite a few "Explorer has caused an error in <unknown> and will now close. It seems to want to take out all of the Norton Works Icons with it. I'm experiencing a lot of internet interruptions as well. That's probably AOL, but regardless, before this thing finds it's way of traveling through the air at 90 m.p.h....... Can somebody help? Tag: Direct X9.0b runtime for end users Tag: 243634
  - 10
    - Need new anti-virus software Hi! Norton A-V came installed on my computer and I used to renew it once a year. After Gateway reformatted my hard drive I had to buy new A-V software and I purchased & installed Norton 2004. It has been nothing but trouble since the first day, despite many uninstalls, reinstalls and another hard drive reformat. Symantec is working with me via e-mail to try to resolve the problems but they are just too numerous and I'm sick of it; this has been an ongoing problem since October 2003. It causes so many errors, etc. that I'm running with no anti-virus protection right now. So to finally get to my question: Can anyone recommend a good anti-virus program other than Norton? I'd probably be better off buying the software on CD instead of downloading something because of my slow, dial-up connection. I really appreciate any advice - thanks!! Tag: Direct X9.0b runtime for end users Tag: 243629
  - 11
    - Windows ME Hangup I was loading software to move digital recorder files to my laptop, after loading Direct X I was prompted to restart PC. When restarting ME hangs up with logo. I have tried everything on emergency disk and ME will not load. I get an error in DOS about %1 and %2 file won't copy. When I run the diagnostics I get a drive 0 error. But in DOS the C drives seems to work fine. Is there anyway to get ME to work short of reformating the drive with the rescue disk? It is an HP laptop. Please respond to gmarmaduke@aol.com. I have limited use of PC since mine is down. Thanks. Tag: Direct X9.0b runtime for end users Tag: 243628
  - 12
    - Help! I left my computer with my mother when I moved across country. After 8 months, I have it back, but it so muddled with miscellaneous programs, etc. that it won't even shut down by itself! I want to restore it to it's original configuration, but in my absence she lost my recovery cd. I can't get a new one from the manufacturer because it's an old operating system, and my computer is so messed up I can't even get system restore to run. Am I doomed? Tag: Direct X9.0b runtime for end users Tag: 243626
  - 13
    - Windows ME hangs at Startup Help! I tried to start up Age of Empires and it said I needed Direct X 9. I went to Microsoft and downloaded it, at the end I got an error message on the blue screen of death. I re-boot the computer and it gets hung up on the "Microsoft ME" opening page. I tried to start in safe mode, but that doesn't work either. I don't know what to do because **I even did a scanreg /restore on command prompt and that didn't work. ANY HELP YOU CAN PROVIDE WILL BE GREATLY APPRECIATED. PLEASE EMAIL ME AT TODDCEE@AOL.COM with Subject line DIRECT X. Tag: Direct X9.0b runtime for end users Tag: 243613
  - 14
    - Commenting registry lines Is it possible to add a comment line or an addition to an existing line in the Me registry for the purpose of documentation? Suppose I wish to change some numeric value from, say, 1024 to 2048 and would like to know at a later date why I did it. Thanks, Ken Bland Tag: Direct X9.0b runtime for end users Tag: 243611
  - 15
    - Blue Screen Error During reboot screen goes blue and this message appears... File Name: VMM(01) + 000099B4 Error: OD: 0028: C000A9B4. What is it and how would I go about fixing it? Tag: Direct X9.0b runtime for end users Tag: 243610
  - 16
    - Start up error I'm getting the following error when my computer starts up. "Windows could not upgrade rhe file %1 from %2" can any one tell me how to correct this error? Thanks Roy Tag: Direct X9.0b runtime for end users Tag: 243607
  - 17
    - Improper Shut Down After going to Start/shutdown. My computer continues to "run". Screen goes blank and white light blinks in upper left corner. When I turn it back on improper shut down appear and scans hard drive for errors. Tag: Direct X9.0b runtime for end users Tag: 243601
  - 18
    - Finding a new drive letter I need to find a new drive letter so my computer will recognize my digital camera. I was told this by Olympus, but they wouldn't tell me how to do it. Can anyone help??????? Thanks, Gus Tag: Direct X9.0b runtime for end users Tag: 243599
  - 19
    - Oops! Fixed I put rundll32.exe in the wrong directory, better get my glasses fixed. All better now. Tag: Direct X9.0b runtime for end users Tag: 243598
  - 20
    - winsock2 error When i start up my computer i get a pop up message from Mc Afee saying that winsock2 is missing. How do i replace this file? Tag: Direct X9.0b runtime for end users Tag: 243589
  - 21
    - Java 2 SE, v1.2 & v1.3 vs Microsoft VM Java 2 SE, v1.2 & v1.3 vs. Microsoft VM: is there a difference between the two besides an obvious version date? Does the Sun product replace the MVM? I have the Java Web Start console on my desktop. There are three Java entries in IE Tools/Internet Options/Advanced; should they be checked or unchecked with this updated Java product? Or is the new Java version only for developers? If so, I'm not one and have no need for this program. Are both equally functional for surfers? Thanks for clarifying this. Bob Tag: Direct X9.0b runtime for end users Tag: 243588
  - 22
    - freezing & errors My computer "freezes" at least every other day--I get error messages often on a variety of things including "system resources dangerously low" and my MS Word program often has problems. I call my PC provider and get it back on track but it always ends up with trouble again. I have heard ME causes problems and XP or 2000 is better--any advice on if that could solve the problems? Thanks Tag: Direct X9.0b runtime for end users Tag: 243587
  - 23
    - Windows ME Hangs at Startup Help! I tried to start up Age of Empires and it said I needed Direct X 9. I went to Microsoft and downloaded it, at the end I got an error message on the blue screen of death. I re-boot the computer and it gets hung up on the "Microsoft ME" opening page. I tried to start in safe mode, but that doesn't work either. I don't know what to do because I even did a scanreg /restore on command prompt and that didn't work. ANY HELP YOU CAN PROVIDE WILL BE GREATLY APPRECIATED. PLEASE EMAIL ME AT TODDCEE@AOL.COM with Subject line DIRECT X. Tag: Direct X9.0b runtime for end users Tag: 243585
  - 24
    - Windows ME Startup hangs Help! I tried to start up Age of Empires and it said I needed Direct X 9. I went to Microsoft and downloaded it, at the end I got an error message on the blue screen of death. I re-boot the computer and it gets hung up on the "Microsoft ME" opening page. I tried to start in safe mode, but that doesn't work either. I don't know what to do because I even did a scanreg /restore on command prompt and that didn't work. ANY HELP YOU CAN PROVIDE WILL BE GREATLY APPRECIATED. PLEASE EMAIL ME AT TODDCEE@AOL.COM with Subject line DIRECT X. Tag: Direct X9.0b runtime for end users Tag: 243582
  - 25
    - System configuration Does anyone know how to do a "cleanup" in the System Configuration Utility? I know you can unclick check-marks and click 'apply', then the system reboots. However, I have this nasty Kazaa thing that keeps coming up, even after unchecking it. There is a button that says "cleanup", but does it clean up the checked boxes??? Which is the proper way? I wonder if this is what is causing my Explorer errors? Thanks, Tina Tag: Direct X9.0b runtime for end users Tag: 243579
- Next
  - 1
    - Scandisk and Disk defragmenter I've tried running Scan disk and disk defragmenter and I can't get either one of them to work. All they do is run forever and never seem to finish. Any ideas on how to fix this would be greatly appreciated thanks. Tag: Direct X9.0b runtime for end users Tag: 243573
  - 2
    - Startup Disks How do I create a startup disk for Windows Me? The instructions online lead me to this message: Windows needs the disk labeled 'Windows Millenium Edition' to continue. Which I don't have, and I can't create one manually as I don't have a Windows 98 Startup disk - how do I get hold of one of those? Any help apprieciated, thanks. Tag: Direct X9.0b runtime for end users Tag: 243570
  - 3
    - ScanDisk Lock-Up Saturday afternoon I was tooling along in Windows ME doing the little things I do everyday. I had a few programs open, was online (dial-up) and creating stationery in OE when suddenly everything froze up solid. CtlAltDel wouldn't work so I flipped the switch on the surge protector, waited half a minute, then flipped it back on. I expected to have a run through ScanDisk and when it came up it had all my drives in its list--the 20 GB C, the 8 GB D, and an external drive I keep backups on--an 80 GB Maxtor that I acquired new last year. ScanDisk went through the C and D drives with only a few restarts--but when it was half-way through the G it locked up, so I had to power off again and start over. The subsequent ScanDisk attempt locked the computer up promptly, so I powered off again and unplugged the G drive from its USB port. Once more I powered up and ScanDisk behaved normally--but now I can't have G plugged in at boot-up because ScanDisk loads to check it and before it or I can do anything ME is locked up again. However, if I plug the external in after boot-up, a single-pane Explorer window opens for it and I can double-click and view what's on it; I can also access its files from my graphics program! But if I close its initial window then try use to Windows Explorer or My Computer to browse it the 'puter locks up solid with the G drive busy light on. The external drive has about 10 GB of files on it. I don't run anything from it--not even installs--nor do I link to its files when I use them in stationery, etc.--but I'd saved a couple of jpgs with normal names to it that day. I've since played with the piece of stationery that seemed to be the troublemaker, but nothing's gone wrong--and both the C and D drives are behaving in WE and My Computer. I haven't installed any new programs since May 8. What can or should I do about this? I haven't tried a Restore although I have a choice of two available from Friday, because I wasn't sure if I should have the G drive plugged in to do that. Is there any way I can get ScanDisk to finish its job?? Any help much appreciated! carol Tag: Direct X9.0b runtime for end users Tag: 243558
  - 4
    - improper shut- down Having trouble shutting down my computer. After clicking on "shut down," I get a blue screen telling me an error has occured under the file name:vwin32(05)=0000 12d0 Error:OE: 0028:c02a44a8. What does this mean?? How can I solve this problem?? Tag: Direct X9.0b runtime for end users Tag: 243549
  - 5
    - errors I am always getting error messages. Have been told to upgrade to XP. Has anyone done this & had better results? Tag: Direct X9.0b runtime for end users Tag: 243545
  - 6
    - Error I am getting an error on my windows applications. See below. Is there any way to get rid of it without doing a total system restore? Thanks Type mistmatch: "KJ_start" Tag: Direct X9.0b runtime for end users Tag: 243544
  - 7
    - windows me floating icon My icons are floating around on my screen and I can not click on them at times because they move too fast. anyone have that problem?? Tag: Direct X9.0b runtime for end users Tag: 243543
  - 8
    - Screen Saver When my screen saver comes on it gives an error SCREENSAVER HALTED - SCRIPT ERROR. Does anyone have information that would help me with this problem? Thanks Tag: Direct X9.0b runtime for end users Tag: 243542
  - 9
    - task bar update hi there, how do i stop the pop-up window that keeps appearing to add live weather to my taskbar....i don't want update...it seems to be from ms.....thanks much....bob Tag: Direct X9.0b runtime for end users Tag: 243540
  - 10
    - win me trying to start windows get message- explorer caused error in unknown. explorer will now close. when try to start in safe mode- get helpctr cause error same problem can't get windows loaded. Tag: Direct X9.0b runtime for end users Tag: 243539
  - 11
    - Can't use printers/USB ports and error message on startup I've just had to use the emergency rebooting disk on my Windows Me laptop as it was continually crashing. After reinstalling everything, this message comes up at every startup, if I click OK, then the whole screen goes blank and if I ignore it then all functions normally. Explorer has caused an error in ~9153535259.TMP. Explorer will now close. EXCEPT, I found that I can no longer connect printers, digital cameras or any other similar non-plug and play devices. Trying to set them up produces this message: Windows needs the disk labeled 'Windows Millenium Edition' to continue. I don't have this disk and have never had it. Any advice would be greatly apprieciated as I am going spare! Tag: Direct X9.0b runtime for end users Tag: 243536
  - 12
    - krnl386.exe error I keep getting the above error (Explorer has caused an erro in krnl386.exe. Explorer will now close). This will not let me click on "mycomputer", etc. I tried reinstalling windows (without reformatting), but this did not fix it, any thoughts Tag: Direct X9.0b runtime for end users Tag: 243535
  - 13
    - WIN32 I AM HAVING AN ERROR POP UP WHEN SHUTTING DOWN COMPUTER AND AOL HAS SUGGESTED THAT I RELOAD VWIN32. THE FILE NAME IS VWIN32(05)+000012D0 ERROR OE:0028:CA02A44A8. I NEED TO KNOW WHERE TO GO TO FIND THE APPROPIATE DOWNLOAD THAT I NEED. I AM HAVING TO SHUT DOWN COMPUTER MANUALLY...THANKS, Tag: Direct X9.0b runtime for end users Tag: 243534
  - 14
    - Computer Reboots Continuosly I have a computer with 2 hard drive that will not boot. It's like stuck in a loop, and will keep restarting continuosly. It will not start in safe mode. So I decided to re-partition and reformat the c: drive, thinking this would solve the problem. WRONG! Still having the same problem on a clean hard drive. Anybody have any suggestions? HELP PLEASE! Tag: Direct X9.0b runtime for end users Tag: 243532
  - 15
    - WildTangent2 I reinstalled WildTangent, then uninstalled it using Add/Remove Programs, then ran spybot(It didn't find anything) then restarted and it seems to be OK. Knock on wood. Jeff Thoele Tag: Direct X9.0b runtime for end users Tag: 243529
  - 16
    - WildTangent I had to install Wildtangent webdriver for a game I had. I have since uninstalled the game and the Wildtangent webdriver but on startup or restart I get this error: C\PROGRAM~1\WILDTA~1\\APPS\CDA\CDAENG~1.DLL It says that it cannot find this file. The only way to fix it is to reinstall Wildtangent which I understand is spyware. All this has happened since I ran SpyBot and it uninstalled Wildtangent. How do I get rid of this error, Jeff Thoele Tag: Direct X9.0b runtime for end users Tag: 243527
  - 17
    - No Windows - Noel I couldn't reply to the response you gave me on my first post. Nothing shows up on the Safe Mode other than those two files from McAfee. I'm using Microsoft ME and I've installed a 3rd party DVD using the USB connection and a D- Link Wi-Fi card (which was all working until...I tried to remove the kazaa icon in the tray). System crashed and only rebooted to the screen without any icons. I tried using the System Disk, but the DVD doesn't respond. I changed the sequence from Hard drive to CD in the bios but that didn't work either. I can use the F8 button to get to the normal, safe mode, or step by step. Here's step by step: process the sytem reistry? create a starup log file (bootlog.txt) enable SMARDRV disk cache loading and initializing IFSHLP.SYS sriver load all windows drivers vnetsup.vxd ndis.vxdjavasup.vxd vnetbios.vxd vredir.vxd dfs.vxd PELMOUSE.VXD MRTRATE.VXD C:\WINDOWS\SYSTEM\VSHINIT.VXD TURBOVBF.VXD msmouse.vxd I then get the mainscreen, ms logo sound and the McAfee logo. When I close the program, all I get is the 2 McAfee programs - that's it. Subject: Re: No Windows From: "Noel Paton" <NoelDPspamless@btopenworld.com> Sent: 6/13/2004 1:13:17 AM Neither of those programs should be loading in Safe Mode (they belong to McAfee AntiVirus, IIRC) what shows in Safe Mode? What OS? - if There's no floppy and no CD, how do you load new programs/data? -- Noel Paton (MS-MVP 2002-2004, Win9x) Nil Carborundum Illegitemi http://www.btinternet.com/~winnoel/millsrpch.htm Please read http://dts-l.org/goodpost.htm on how to post messages to NG's or http://www.microsoft.com/presspass/features/2001/Mar01/Mar2 7pmvp.asp "rickyb" <anonymous@discussions.microsoft.com> wrote in message news:1b7db01c4511b$7f0bc0a0$a601280a@phx.gbl... > I have this Sony Vaio PCG SR17 toy computer that has > neither a CD nor floppy drive. When I boot up I get as > far as the screensaver with nothing else - no start > button, no icons, no windows. I've tried f8 using the > back door to the Safe Mode, but it still does the same > thing. When I hit Ctrl-Alt-Del to see what up, I only get > two programs loading: Vsstat and Vshwin32. Anybody have > any ideas? > Thanks > rickyb Tag: Direct X9.0b runtime for end users Tag: 243525
  - 18
    - Uninstalling Windows ME on Mult. Operating System Can anyone point me to info on how to uninstall Windows ME when installed with Windows 2000 on a multiple OS System? Tag: Direct X9.0b runtime for end users Tag: 243523
  - 19
    - explorer I'm hoping someone can help me. Evertime I start Windows, on my Desktop when I try to open My Documents, My Computer...I get the message:"Exlorer has caused error in <unknown>. Explorer will now close. Try rebooting...." I reboot and then it works. However, sometimes it won't. Frustrated, Tina Tag: Direct X9.0b runtime for end users Tag: 243522
  - 20
    - System Restore I've tried to run system restore, But I continue to get a message that tells me to restart my computer than run System Restore again. I've done this 3 times but continue to get this message. ????? Tag: Direct X9.0b runtime for end users Tag: 243519
  - 21
    - System Restore System Restore will not Run. I'ce clicked on my system restore Icon and get a message to please restart the computer and then run system rstore again. I've done this 3 times and I continue to get this message. ?????? Tag: Direct X9.0b runtime for end users Tag: 243518
  - 22
    - TMP Error Message I am getting an error message when my computer boots up. Says Explorer has caused an error in 669806868.TMP....Explorer will now close. I cannot delete the file (I actually changed it to say hidden and then deleted it, but, still have error message). If I close the message, it basically shuts down everything on my computer Tag: Direct X9.0b runtime for end users Tag: 243513
  - 23
    - Changed file type I had accidently changed a file to open with a different program, which in turn changed all the related file types. Unfortunately, these files must be recognized by an internal program from the actual software program and cannot find or open them. I've tried and re-installed the program but all the files are shown again as what I changed them to. Please Help Tag: Direct X9.0b runtime for end users Tag: 243511
  - 24
    - Removing Logon Message I just re-installed Me and now I have a network logon message that I am prompted for each time I restart. Any ideas how I get rid of it? Bob Tag: Direct X9.0b runtime for end users Tag: 243502
  - 25
    - No Windows I have this Sony Vaio PCG SR17 toy computer that has neither a CD nor floppy drive. When I boot up I get as far as the screensaver with nothing else - no start button, no icons, no windows. I've tried f8 using the back door to the Safe Mode, but it still does the same thing. When I hit Ctrl-Alt-Del to see what up, I only get two programs loading: Vsstat and Vshwin32. Anybody have any ideas? Thanks rickyb Tag: Direct X9.0b runtime for end users Tag: 243501

How can I tell if Direct X 9.0b runtime for end users

is installed in my computer. Please don't tell me to run

the Microsoft download system. It tries to reinstall

this program over and over. Is there no way to tell if

one of these installations is in place.

Top

Re: Direct X9.0b runtime for end users by Noel

Noel
Tue Jun 15 15:24:13 CDT 2004

Run DXDIAG from a DOS prompt
that'll tell you

--
Noel Paton (MS-MVP 2002-2004, Win9x)

Nil Carborundum Illegitemi
http://www.btinternet.com/~winnoel/millsrpch.htm

Please read http://dts-l.org/goodpost.htm on how to post messages to NG's
or
http://www.microsoft.com/presspass/features/2001/Mar01/Mar27pmvp.asp

"Ed" <anonymous@discussions.microsoft.com> wrote in message
news:1ce9101c45315$5f002480$a401280a@phx.gbl...
> How can I tell if Direct X 9.0b runtime for end users
>
> is installed in my computer. Please don't tell me to run
>
> the Microsoft download system. It tries to reinstall
>
> this program over and over. Is there no way to tell if
>
> one of these installations is in place.

Top