SE 1R196 15.10.2007

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Ugrading from Windows ME to XP I gave my stepmother an old computer. The computer originally had Windows 98 on it and upgraded it to XP Home addition. She recently passed away and we are disposing of the computer. This computer is actually older than my father's computer which has ME on it. Can I take my operating disks from the the computer that will be disposed of and install them on my Dad's computer which has Windows ME on it? The system was licensed to the old computer. If we can't do that, we probably will switch out the drives, but it will still be easier to upgrade my Dads than doing all the switching. When I upgraded the computer I gave to my mom, I put in a new hard drive. Because I had also replaced the monitor and the printer, we had a miserable time getting XP to be valid. We spent hours with Microsoft on the phone (It was free then). Will have this same problem if I try to upgrade my Dad's computer??? Remember . . .The other computer is too old to give away so we are getting rid of. Tag: SE 1R196 15.10.2007 Tag: 292086
  - 2
    - windows ME Can I change my system from ME to a NEW up to date system from a down load off the internet Tag: SE 1R196 15.10.2007 Tag: 292076
  - 3
    - Hasn't anyone installed a hard drive into multiple computers? I have done this without thinking of something until now and here's the story: I am someone that collects used computers and one thing that I've done is took a Windows Millennium edition containing hard drive out of a Dell and installed it into two other Dell computers and I am thinking of installing it in a Gateway computer. The problem here is that I'm asking myself: how do you remove the recent computer's features, settings and the device drivers information out of the registry? Please shed some light on this darkness anyone who has a any info on how I can fix this problem; I'll appreciate it very much. Tag: SE 1R196 15.10.2007 Tag: 292075
  - 4
    - Windows Me Startup sound hello all. i am trying to find the Windows 2000/Windows Me startup sound but i cannot seem to find it. i do not have a Windows 2000 or Windows Me disc. does anyone know where i can find it? please let me know. thank you -- -astrodog19 Tag: SE 1R196 15.10.2007 Tag: 292071
  - 5
    - need installation disk We've got an hp pavilion 8775c computer that was in the trash. It was full of viruses, so I erased the harddrive (windows me). I installed win98 on it. I then purchased the recovery cds. The computer doesn't have the original sound card (I added a new one) and I added extra memory. The recovery cds (which install windows me) is not recognizing the computer although these cds are for this model. (The mainboard is the original one.) The computer has a sticker for windows me on it with the software key. I'm looking for a copy of an installation disk for windows me (upgrade or new) that I can use to reinstall windows me - or any suggestions on how to get these recovery cds to function. (They're original recovery cds from hp). Thanks for any help. Tag: SE 1R196 15.10.2007 Tag: 292069
  - 6
    - Explorer..Shell32.dll Explorer has cause an error in Shell32.dll. Explorer will now close. If you continue to experience problems, try restating your computer. This error popped up first time while adding an MP3 file to Winamp 5.1. I clicked close. The mp3 file however got added and played normally. I noticed that Modem and Soundcard icons have dissppeared from the Quick Launch bar leaving Volume icon only. But both of them remained active. Restarting the computer made no change. I soon found out other players ( Total Recorder, Cooledit) are acting similarly. Scanreg... reports no error in registry. Reinstalled the windows and the players and still the same position. Please help..... Tag: SE 1R196 15.10.2007 Tag: 292068
  - 7
    - Win.ini: [TRANTOR_SETUP_PROGRAM_LOADED_TEMPORARY_INFO] Hello! I doubt anyone will be able to answer this. I'm trying to squeeze every last byte out of my Father's ME system. In Msconfig/Win.ini I find a key named [TRANTOR_SETUP_PROGRAM_LOADED_TEMPORARY_INFO]. Has this got any reason for existence? Doesn't sound likely, does it. I'll disable it for a test, but still would like to know what it was I disabled. Thank you kindly! Tag: SE 1R196 15.10.2007 Tag: 292045
  - 8
    - Spybot update Oct 10 richard Tag: SE 1R196 15.10.2007 Tag: 292031
  - 9
    - Error message When I try to buy a product from this particular company's web site I get this error message: Microsoft OLE DB Provider for SQL Server error '80040e' Incorrect syntax near the keyword 'AND' /AnimalHealth/OrderEntry/ProductItem.asp, line 116 I called the company and two of their employees followed my sequence of clicks and they said it worked fine on their computers so they didn't know how to help me. I placed my order by phone but would like to fix my problem so I can order on line next time. Any suggestions? Tag: SE 1R196 15.10.2007 Tag: 292027
  - 10
    - Off topic to this NG Scanning problems, old system, Dell 4100, ME, IE6 SP1. 3rd party issue with Visioneer 6100, USB connected with Paperport 6.1software. Problem just started with no changes to the system. Scans do not work in black/white mode from TWAIN tool dialog box. Grayscale & color is OK, meaning scanning a B/W article in the color or grayscale mode scans OK, but not in the B/W mode. Been using the system for 7 yrs without problems. Unless someone in this NG could have tips, could someone point me to a techie message board? tia Tag: SE 1R196 15.10.2007 Tag: 291999
  - 11
    - Help: I Can Only Load Pages For Several Minutes My old Compaq pc with WindowsME only allows me to surf the internet for several minutes. It will then completely stop loading pages and in order to temporarily fix the problem I have to reboot. At first I thought it was Verizon(which had gone down a couple of days ago), but has hoping someone can give me advice on what to check and do next if it is my system itself. Sometimes I can't even save an image because the system "thinks" there is not enough room on my drive even though it is a 4g that has 6-700mb free. Any advice would be appreciated. Thanks. Darren Harris Staten Island, New York. Tag: SE 1R196 15.10.2007 Tag: 291992
  - 12
    - Floppy disk, do I need it? I'm strongly considering a new desktop computer and notice that many (most?) of them no longer include a slot for floppy disks. I feel like I'd be losing something that might be necessary, even though I very rarely use that feature any longer. I believe there are accessory floppy disk readers/writers available, but are they worth the trouble and expense? What will I lose if I have no floppy disk ability at all? TIA Ken Bland Tag: SE 1R196 15.10.2007 Tag: 291975
  - 13
    - SpamBully Top of the morning to you! Oops! Top of the afternoon, and evening for everyone else. I would like to know YOUR opinions about SpamBully by Axaware? Thanks! Tag: SE 1R196 15.10.2007 Tag: 291974
  - 14
    - AdAware SE update Oct.8 richard Tag: SE 1R196 15.10.2007 Tag: 291971
  - 15
    - SpywareBlaster Update Oct 7 richard Tag: SE 1R196 15.10.2007 Tag: 291964
  - 16
    - Tab Issues Hi all, I am not sure which catagory this question belongs in, so pardon me if Im sending it to the wrong group... My problem is this: My TAB button on my keyboard will not move my cursor. For example, when signing into my Yahoo email, I'll input my username, and then press the tab button to move the cursor down so I can put in my password, but it will not move. Yet if I am on a regular webpage, the tab button will function just fine. I thought it was a keyboard problem, even though every other function worked just fine..I went and purchased a new keyboard anyway. But I am still having the same problem, so it cannot be the keyboard. I didnt always have this problem, it just started maybe 2 months ago or so...but its darn annoying. Anyone have any idea of why it's doing this? Any settings that I can alter or is there something I may have altered that I shouldnt have? Thanks in advance! .................................................... You can complain because roses have thorns, or you can rejoice because thorns have roses. Tag: SE 1R196 15.10.2007 Tag: 291945
  - 17
    - XP from ME This is a multi-part message in MIME format. ------=_NextPart_000_00B0_01C8089E.438984C0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable Hello all.. I have a maybe stupid question, but I really dont know the answer.. I have been running Windows ME for years now with very few issues.. But I just think its time for me to move on to XP..ME is too difficult = to find any help or answers for these days. My question is.. What is the best way to do this? Is it best to simply "upgrade" to XP from ME, or to delete ME altogether = and install a fresh copy of XP? This is new to me and I will have to do this myself so what is the best = way to go about this? I just want to be sure that I wind up with a fresh installation of = Windows XP and nothing else with it Thanks to everyone in advance! You can complain because roses have thorns,=20 or you can rejoice because thorns have roses. ------=_NextPart_000_00B0_01C8089E.438984C0 Content-Type: text/html; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Dwindows-1252"> <META content=3D"MSHTML 6.00.2800.1555" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY> <DIV><FONT size=3D2>Hello all..</FONT></DIV> <DIV><FONT size=3D2>I have a maybe stupid question, but I really dont = know the=20 answer..</FONT></DIV> <DIV><FONT size=3D2></FONT> </DIV> <DIV><FONT size=3D2>I have been running Windows ME for years now with = very few=20 issues..</FONT></DIV> <DIV><FONT size=3D2>But I just think its time for me to move on to = XP..ME is too=20 difficult to find any help or answers for these days.</FONT></DIV> <DIV><FONT size=3D2></FONT> </DIV> <DIV><FONT size=3D2>My question is..</FONT></DIV> <DIV><FONT size=3D2>What is the best way to do this?</FONT></DIV> <DIV><FONT size=3D2>Is it best to simply "upgrade" to XP from ME, or to = delete ME=20 altogether and install a fresh copy of XP?</FONT></DIV> <DIV><FONT size=3D2>This is new to me and I will have to do this myself = so what is=20 the best way to go about this?</FONT></DIV> <DIV><FONT size=3D2>I just want to be sure that I wind up with a=20 fresh installation of  Windows XP and nothing else with=20 it</FONT></DIV> <DIV><FONT size=3D2></FONT> </DIV> <DIV><FONT size=3D2>Thanks to everyone in advance!</FONT></DIV> <DIV><FONT size=3D2></FONT><BR><FONT face=3D"Black Chancery" = color=3D#0000ff>You can=20 complain because roses have thorns, <BR>or you can rejoice because = thorns have=20 roses.</FONT></DIV> <DIV><FONT size=3D2></FONT> </DIV> <DIV><FONT size=3D2></FONT> </DIV></BODY></HTML> ------=_NextPart_000_00B0_01C8089E.438984C0-- Tag: SE 1R196 15.10.2007 Tag: 291936
  - 18
    - Aren?t Computers Interesting?? This is a very cool group you have going here. I find it quite interesting how computers behave at times. Sometimes you wonder if they have a mind of their own or not. These posts are quite interesting and educational for me ? I?ve learned a bit about the errors that can occur. Scan your computer for ErrorsFor Free!http:// errors.www-marketingpros.com Tag: SE 1R196 15.10.2007 Tag: 291933
  - 19
    - Have memory leaks? Hibernate... I'd mentioned a few days back that Hibernate seems to do an excellent job of cleaning up memory leaks altho my hibernations (only) averaged about 10 seconds. Like catnaps, these short hibernation sessions seemed to really revitalize the system performance. I'm sorry if I'm beating on a dead horse but I have seen no mention of a refreshing and memory cleansing associated with hibernate. A reboot has always been needed to get such a refreshing effect. I have to report a couple errata... First the (System Monitor) reported available memory after Hibernating is 366 MB, not 300 MB (on a 512 MB RAM system). Second, and probably more significant, the nature of my hibernate sessions has changed and I can't explain why. Today true hibernation occurs. The other day I said the extent of a hibernation session was about 10 seconds. After 10 seconds my computer resumed operation with the memory cleansed from (plus an increment from 244 MB max to 300 MB max). At first Start ->Shutdown->Hibernate was followed in a second or two by a black screen and the green Power On Led at the front of the monitor going off. Eight seconds after that the monitor would regain power and shows the usual desk top. That has changed and the monitor is NOT automatically returning to active status. Instead the computer appears to shutdown. The fans on the PSU and CPU turn off. The leds that I usually look at show the system is off go off. It stays that way even if I mouse or press keys on the keyboard including Ctrl-Alt-Del. When I press the Power-on button at the front of the chassis, hold it for a second or two, then it appears to do a normal restart except, after the usual boot-up messages appear on the screen, something like a white status bar appears at the bottom of the screen with a message about Hibernation is over. A few seconds everything appears to be better as I reported previously. Bottom line is my original report that System Monitor indicates Hibernate cleans up memory leaks plus adds another increment of memory for the Users space still seems valid. But, instead of taking just ten seconds and with no other user action, now it appears that one will go thru a true hibernation cycle and these take me at least a minute. Hope this helps, Bob Tag: SE 1R196 15.10.2007 Tag: 291920
  - 20
    - Spybot S&D Hello, I just upgraded from version 1.4 to 1.5 Problem(s): 1) It takes about 2 minutes to get the Spybot screen loaded before it shows on the computer screen. 2) I honestly don't know what settings I should have on/off. 3) Thinking of uninstalling version 1.5 & going back to version 1.4. Any ideas as of why the new version is such a hog on computer resources? Way too slow to load. Also, what's the best way to go back to the older version - without affecting any files that might be left over throughout the system/registry. Thanks, Ed Tag: SE 1R196 15.10.2007 Tag: 291911
  - 21
    - Spybot Update 10-4-07 -- Alias To email me, remove shoes Tag: SE 1R196 15.10.2007 Tag: 291910
  - 22
    - Anyone install IE7 on windows millenium edition? Hello All Has anyone installed IE7 on windows Millenium Edition? Any tips? Is it hard to get back to IE6 if your system doesn't work well with it? Thanks Bob Tag: SE 1R196 15.10.2007 Tag: 291901
  - 23
    - upgrading ME to XP HI, someone has an ad in the newspaper that is selling an older pc that she says she loaded it with XP and it runs good. However, in the event of a reinstall needed, the recovery disks will be reloaded with ME (which she will provide with the newly upgraded older pc) Just what kind of differences (physically and mechanically, etc) will there be if an older pc is upgraded from an ME, to an XP home edition. I have a 2 yr old laptop with XP home. WIll the windows, icons, prompts, etc look the same on both pcs with XP even though older pc had ME once? hope my question makes sense as I havent seen the older pc w/Xp Tag: SE 1R196 15.10.2007 Tag: 291889
  - 24
    - GOOD NEWS! Memory Leak Work Around -> Hibernate A couple days ago, while running the System Monitor, I tried Start -> Shutdown -> Hibernate again. Good news! It appears to have a very positive affect in cleaning up memory leaks. We've been using winME at our home ever since it came out in 2000 or whenever. I have been constantly amazed at the bad press it receives because it has worked so well for us. At first I really liked its Movie Maker (had some help from MS before it was dependable with our old Sony VX1000). Also the Sony Blue Ray worked altho Sony told us it wouldn't. Since Internet Explorer 6.0, it definitely got worse. I put IE6.0 on twice. The first time up the system was such a pain that I figured out how to get it off and went back to IE5.5 after a week. I think it was a couple years and possibly more before we were somewhat coerced into trying IE6 again. Probably because the Intuit tax software demanded it. The system tolerated IE6 much better this time but still not as well as IE5 or 5.5. Anyway, this summer, July I think, I became curious about the non- default abilities of the System Monitor, turned it on and went thru them again. This time it seemed to be a good predictor of when system performance was beginning to slide. So we now have it on autostart and keep it up 24/7 (drag most of it off the right side of the screen). I've been watching two graphs: the Memory Manager: Unused physical memory and the Kernel Processor Usage. That has been an eyeopening experience. Almost immediately, I could see what appear to be major memory leaks - something worth complaining about. But a little Googling quickly found this has been widely reported for a long time. So I didn't waste anybody's time. The Kernel Processor Usage also looks bizarre. But that might only be due to my not understanding what this graph is supposed to show. I have long used performance meters, most recently I've used the basic NT4 performance meters. With that experience, this ME graph seems to reflect the system cpu utilization. It has the word "kernel" in the title so perhaps there is a "non-kernel" component to cpu utilization. Even so, what it appears to show is not good. After an hour or so, the cpu resources are about 75% consumed even when "resting" - the user doing nothing. The main work would have to be Virus checking and network monitoring (monitoring a Cox Cable Modem and maybe Bluetooth?). As for Hibernate - I think it worked for us initially. But it (or Standby?) normally comes on automatically - the screen saver comes on first cycling thru My Pictures for about 10 minutes then the computer goes to sleep (Black screen) so I seldom go thru the Start Button to turn on Hibernate (Start->Shutdown->Hibernate). Nowdays, it doesn't really work. The system hibernates for about 10 seconds then wakes up! But System Monitor does show whatever the current memory leaks are, it fixes them in 10 seconds. Check it out. Tag: SE 1R196 15.10.2007 Tag: 291885
  - 25
    - Update ME to XP My parents purchased a digital camera which did not support ME. I installed XP. Now it appears that my mothers files are there, but not the programs. It tries to open them in wordpad. Therefore it gives odd symbals. rather than what she had in her document. It also eliminated her address book in outlook express. I do not see her virus protection either. Please help to get this back. I have not installed anything since this happened. -- Joe Tag: SE 1R196 15.10.2007 Tag: 291884
- Next
  - 1
    - me won't start Hi When I turn on pc does the initial boot. Then I get the window saying last shut down was bad and it wants to scan the hard drive for errors. It starts then pc freezes. I don't have any original cds. How can I get past this? Thanks Sherry Tag: SE 1R196 15.10.2007 Tag: 291877
  - 2
    - Copying WinME Feature to Win98SE I remember that, when the Recycle Bin first came out, it was useless for restoring files deleted from a floppy disk. So I copied Windows Undelete from the old install of Win3.1 to Win95, and it worked fine. I still use it with Win98 floppy disks. I want to do the opposite of that. I want to copy the following features of WinME to a CD before I uninstall WinME, and restore these feature after I restore Win98SE. C:\Windows\DVDPlay.exe Control Panel>Add/Remove Programs>Communications>Universal Plug and Play Control Panel>Add/Remove Programs>System Tools>Compressed Folders Control Panel>Taskbar and StartMenu Windows Movie Maker Windows System Restore anything that I'm missing that you think would be useful in Win98SE Thanks for your help! Tag: SE 1R196 15.10.2007 Tag: 291870
  - 3
    - Insufficient memory error printing from Microsoft Photo Editor Trying to print from Microsoft Photo Editor to my Canon Pixma MP150 printer gives an insufficient memory error. The printer works from other applications. What could be going wrong? Thanks in advance, Martin Murray Tag: SE 1R196 15.10.2007 Tag: 291862
  - 4
    - ME...DOS ERROR 4 I had been running a Clipper application successfully for the last 18 months. A few days ago I reinstalled ME after formating my hard-disk's C partition. I have 40 Gb HD, partitioned as C and D. The following statements used previously were duly incorporated: Autoexec.bat Clipper = F100 Windows\system.ini [386Enh] PerVMFiles=120 The application now does not run and gives a Dos Error 4. Increasing the Files statement upto 240 made no difference. Installed the application afresh but no success. Any ideas, hints, advise ?? Tag: SE 1R196 15.10.2007 Tag: 291851
  - 5
    - Crap Cleaner Update Make sure you untick the offer for a Yahoo Tool Bar when installing. Alias Tag: SE 1R196 15.10.2007 Tag: 291846
  - 6
    - lost password I have a home network with file sharing. Of course, I have misplaced the password for the shared files on a computer running Windows Me. How can I reset or, better still, do away with the password when I do not have the old one? Tag: SE 1R196 15.10.2007 Tag: 291841
  - 7
    - Ad-Aware SE Update SE1R193 24.09.2007 Tag: SE 1R196 15.10.2007 Tag: 291833
  - 8
    - Spybot Update Latest update is ready. Harry. Tag: SE 1R196 15.10.2007 Tag: 291832
  - 9
    - Spybot Any ideas why each time I run Spybot it goes to the set up screen? Did system restore, but that didn't help. THANK YOU!!! Hey, I know this is a Windows ME newsgroup, but you folks know just a whole lots more about stuff than most. >>>HUGS<<< Tag: SE 1R196 15.10.2007 Tag: 291828
  - 10
    - Lost file 'snlanga.dll' I lost this file, don't know how but when rebooting it says it is lost. How can I get it back? I still have Windows ME. Tag: SE 1R196 15.10.2007 Tag: 291818
  - 11
    - Keyboard quote marks When I wish to write a word(s) in quotes - be single or double quotes, I have to hold the shift key & hit twice for either of them. When doing so, it shows *twice* "" for open & close quotes & also twice for single quotes: '' How can be this be fixed. Looked at Control Panel | keyboard & didn't find a solution. Problem occurred when I installed ASCII characters in Spanish. Thanks, Ed Tag: SE 1R196 15.10.2007 Tag: 291811
  - 12
    - Network Password After installing a network card, i now get a "enter network password" at boot up. Is there any way of getting rid of this box so that it boots straight to windows. Thanks Tag: SE 1R196 15.10.2007 Tag: 291805
  - 13
    - Spybot S & D, Spyware Balster - New Defs -- Delboy A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools. Douglas Adams Tag: SE 1R196 15.10.2007 Tag: 291790
  - 14
    - enable web content in folders also taskbar problems. When opening any folder and hitting the tools button, then folder options, i seem to have lost half of the radio buttons that i had previously. Half of them are now greyed out and cannot be used. I have also lost my quick launch on the taskbar, and am unable to right click on taskbar to bring up menu. Any assistance would be truly grateful. Thank you. Tag: SE 1R196 15.10.2007 Tag: 291785
  - 15
    - Error 02 0028 C0030BAB All of a sudden I started getting the above error and can't find anything about it. Does anyone have a clue as to what this error pertains to? Any help will be greatly appreciated. K Tag: SE 1R196 15.10.2007 Tag: 291779
  - 16
    - FYI Heirloom Howdy, Found a cure for our puter not starting completely.. For about 2 years our puter would fail to start 8 out of 10 times and have to do a scan disk to get it working.. Well over the weekend we removed/deleted all references to HP printer tool box and drivers.. Well kiss the frog, the puter now starts every time, fast and completely... Hasn't failed to start once... Who would have thought HP would have been the problem... :o) Rocky T Squirrel Tag: SE 1R196 15.10.2007 Tag: 291771
  - 17
    - Ad-Aware SE update 9/17 Tag: SE 1R196 15.10.2007 Tag: 291760
  - 18
    - Crash in Console while using queuing a work item Hi All, I have a usb driver running in Windows ME but when i type something in console prompt then either system crashes or console crashes. Exact steps are given below. 1) Plug in a usb modem. 2) Go to start->Run->Type command->Enter 3) Command prompt opens. Type something in command prompt. 4) Either system crashes or console crashes. I have come to know that crash occurs near the function where i queues a work item in a system worker thread. I am using the standard functions "IoAllocateWorkItem()","IoQueueWorkItem()" and "IoFreeWorkItem()" functions to queue the work item. The function which queues the work item is running at DISPATCH LEVEL and obviously the callback function is running at PASSIVE LEVEL. How can i queue the work item without the console crash? Any help will be greatly appreciated. Thanks a lot, Ajay Tag: SE 1R196 15.10.2007 Tag: 291756
  - 19
    - No drag and drop possible On my Toshiba Satellite 2800 with Windows SE is impossible to drag and drop files from a floppy or CD-ROM onto the desktop. Nor is it possible to drag and drop a file on the desktop into a newly created folder on the desktop. Tag: SE 1R196 15.10.2007 Tag: 291749
  - 20
    - Boot Up Problem with Win ME (AV Related?) I have a friend who has an older computer, running Win ME. He has left town to go to Chicago, but in the mean time a 21-year-old intern has come to live at his place and needs to use his computer. His computer had an old version of Norton AV on it, which was not updated since 2004. So I advised the intern, Ellen, to remove Norton and install AVG instead. She does this. Unfortunately, she is not a computer-savvy person, and previously had only used Macs and XP machines. So, sometime after installing AVG and perhaps after installing Firefox, she starts getting these error messages, which she basically ignores. One of these messages said something about installing a disk in drive A:, i.e., the emergency boot disk. She did not have one and did not know what they meant, so just ignored the message. By the time I got there with my own boot disk, the machine just would not boot up. You'd get this start up screen with the various choices, and it would be defaulting to Safe Mode. But you'd try to boot into Safe Mode, and it would just run through the initial splash screen cycle, and put you back to the same menu, trying to boot into Safe Mode. We tried the boot disk, did scandisk and scanreg, but neither worked. The "Help" file on the boot disk says something about an antivirus program causing failure to boot, but does not say how to fix this. Oh, we did run the utility that checks out file fragments or memory fragments or whatever and converts them into a FILE0001.CHK type file. That file had several references to AVG7, so it seems likely that the antivirus had something to do with the problem. Can anyone clue me in to the cause of the problem? And how to go about fixing it? Or do I just need to take the computer in to a repair shop? C'ya, Ben Tag: SE 1R196 15.10.2007 Tag: 291721
  - 21
    - CA Anti-Virus Question Hey folks! Any ideas as to why CA Anti-Virus application will not load? Tried removing it to reinstall... haha... yeah, right. Checking here with the know-it-alls (LOL) before I go to the CA website. TIA! P.S. Spybot found absolutehttp.dll during a scan. I removed the spyware. Did removing it have anything to do with CA Anti-Virus? HELPPPPPP!!!!!! Tag: SE 1R196 15.10.2007 Tag: 291713
  - 22
    - Spybot S&D Updates Today! Tag: SE 1R196 15.10.2007 Tag: 291711
  - 23
    - SpywareBlaster updates sept 12 richard Tag: SE 1R196 15.10.2007 Tag: 291710
  - 24
    - Ad-aware SE Update New definitions file: SE1R191 10.09.2007 In case it was posted already, I beg everyones pardon. My last visible posts in this group were from 09.09.2007. Harry. Tag: SE 1R196 15.10.2007 Tag: 291698
  - 25
    - Good or bad?? I "found" the following program: http://malwareremoval.com/ which I dindt download or subsribed. Is it Good or Bad??? Tks in advance. Dont really nead it, but somehow can't rid of it...seems fishy. -- cogito ergo sum Tag: SE 1R196 15.10.2007 Tag: 291690

Go get it (Ad-Aware Update).

Top