proxy setting policy removal

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Problems Reinstalling Intranet (WSS 2.0 & CompanyWeb) I'm running SBS 2003 SP1. I had installed WSS 3.0, side-by-side install using the docs, and then removed it. I am now having problems with the intranet (WSS 2.0 & CompanyWeb). I followed directions from MS Support (829114) but I cannot reinstall the Intranet component now. I get the following error from the sbs installer... "An error occurred while installing Windows SharePoint Services and creating your intranet site.". Below are the contents of my errorlog.txt and I can reference the eventlog.txt if needed. Does anyone have any solutions on how I can fix this short of reinstalling the entire SBS again? ----ERRORLOG----- [07/09/08,00:27:19] Intranet: [2] CClientX::InitializeModule found STS not installed by SBS. [07/09/08,00:27:57] WizardUI: [2] ISetupManager::GetGlobalCustomProperty() failed in CPageBase::GetGlobalProperty(): GUID = {F205AE18-9D39-4E3C-A4BA-12FBA060ED91} [07/09/08,00:28:04] Licensing: [2] Copying sbsmor.chm failed (error = 5). Check for the file in %winroot%\help directory. [07/09/08,00:28:04] Licensing: [2] Copying sbslic.chm failed (error = 5). Check for the file in %winroot%\help directory. [07/09/08,00:28:05] Licensing: [2] Copying sbsart.chm failed (error = 5). Check for the file in %winroot%\help directory. [07/09/08,00:28:05] Licensing: [2] Copying sbsshared.chm failed (error = 5). Check for the file in %winroot%\help directory. [07/09/08,00:28:12] Licensing: [2] FindLinkByTarget failed to find the licensing link with error [-2147024894]. [07/09/08,00:28:12] Licensing: [2] UpdateLinkPath failed to update the licensing link with error [-2147024893]. [07/09/08,00:28:25] WizardUI: [2] ISetupManager::GetGlobalCustomProperty() failed in CPageBase::GetGlobalProperty(): GUID = {FBCCE6F3-9E2D-464D-A4E7-12FBFD515395} [07/09/08,00:28:25] WizardUI: [2] ISetupManager::GetGlobalCustomProperty() failed in CPageBase::GetGlobalProperty(): GUID = {FBCCE6F3-9E2D-464D-A4E7-12FBFD515395} [07/09/08,00:28:33] WizardUI: [2] ISetupManager::GetGlobalCustomProperty() failed in CPageBase::GetGlobalProperty(): GUID = {FBCCE6F3-9E2D-464D-A4E7-12FBFD515395} [07/09/08,00:28:37] WizardUI: [2] ISetupManager::GetGlobalCustomProperty() failed in CPageBase::GetGlobalProperty(): GUID = {FBCCE6F3-9E2D-464D-A4E7-12FBFD515395} [07/09/08,00:28:38] WizardUI: [2] ISetupManager::GetGlobalCustomProperty() failed in CPageBase::GetGlobalProperty(): GUID = {FBCCE6F3-9E2D-464D-A4E7-12FBFD515395} [07/09/08,00:28:47] WizardUI: [2] ISetupManager::GetGlobalCustomProperty() failed in CPageBase::GetGlobalProperty(): GUID = {F205AE18-9D39-4E3C-A4BA-12FBA060ED91} [07/09/08,00:29:15] Server Configuration: [2] Admin: Couldn't get group container for [LDAP://CN=Internet Users,OU=Security Groups,OU=MyBusiness,DC=dopplegangers,DC=local] [07/09/08,00:29:17] Server Configuration: [2] Admin: Couldn't get group container for [LDAP://CN=Internet Users,OU=Security Groups,OU=MyBusiness,DC=dopplegangers,DC=local] [07/09/08,00:29:18] Server Configuration: [2] Admin: Couldn't get group container for [LDAP://CN=Internet Users,OU=Security Groups,OU=MyBusiness,DC=dopplegangers,DC=local] [07/09/08,00:29:18] Server Configuration: [2] Admin: Couldn't get group container for [LDAP://CN=Internet Users,OU=Security Groups,OU=MyBusiness,DC=dopplegangers,DC=local] [07/09/08,00:30:11] Intranet: [2] HrRegisterFaxRtExt failed in CClientX::DoInstall hr= [80070057] [07/09/08,00:30:13] Intranet: [2] _SBSDnsCreateCNAMERecord failed in CClientX::DoInstall hr= [800725ed] [07/09/08,00:30:43] Server Configuration: [2] Failed to Create the Company DL public folder [07/09/08,00:30:45] Server Configuration: [2] Failed to Create the Company Contacts public folder. [07/09/08,00:30:45] Server Configuration: [2] Failed to create the Public Folder with error [0x80070057]. [07/09/08,00:31:11] WizardUI: [2] ISetupManager::GetGlobalCustomProperty() failed in CPageBase::GetGlobalProperty(): GUID = {63ECC03C-3D58-4074-903D-E80CFC5BDC25} ------END------- Tag: proxy setting policy removal Tag: 402164
  - 2
    - network connection problems after Windows updates I have a problem with LAN connections after applying updates KB951748, KB951746, and KB948110. I can not connect to the SBS 2003 server or SharePoint Website nor can I ping anything from the SBS box. Has anyone else had any troubles? Internet connections are working, clients are setup for DHCP on the router. Everything was fine until the updates. Any suggestions? Thanks, Tag: proxy setting policy removal Tag: 402145
  - 3
    - Domain Users cant execute applications on SBServer This is SBS 2003 R2 Premium as Domain Controller, with Server 2003 for Terminal Services. Remote users can log-in to the Terminal Server and execute applications on there, including Outlook and the usually installed applications. However, one group application is installed on the SBServer and when a non-Adminstrator user tries to run this they get the error message: "Windows cannot access the specified device, path or file. You may not have the appopriate permissions to access the item" I've checked the user are members of the Remote Web Workplace group, and that the application they are accessing lives in folders which have Full Control permissions for Everyone. Any ideas what to check next? TIA, JohnK Tag: proxy setting policy removal Tag: 402125
  - 4
    - Aol and Hotmail marking sbs mail as spam The olny reason I can think of is the mail goes through a Backup MX server before it gets to me and the IP where the mail is sent and the IP of the domain don't match up, but that doesn't seem to be like it should make a difference. Any ideas what can cause this or how to fix it? The suggestion tell everyone who you e-mail to add you to their address book doesn't seem to fly with them thanks for the help Tag: proxy setting policy removal Tag: 402123
  - 5
    - Internet Connection Timeouts & Failures Hi, We are encountering â??Error Code 10060 Connection Timeoutâ?? errors very regularly (5% - 10% of our web requests) ever since we replaced our SBS 2000 (running on old hardware) with SBS 2003 R2 Premium (running on a new). Most pages that donâ??t â??timeoutâ?? load slowly. This happens on the server itself as well as for our users. Weâ??re running ISA 2004 and it appears to be configured correctly (no errors or warnings from the ISA Best Practices Analyzer). Iâ??ve configured the new server to match the old server wherever possible and weâ??re using the default Firewall rules. There were no changes to the network topography or hardware, and weâ??re using the same broadband provider & level of service. All our users are running XP Pro, are using the SBS Firewall client and have the same security privileges. We donâ??t block any sites or restrict any traffic. The Firewall monitor shows â??alertsâ?? that there are â??timeoutsâ?? and sometimes that there is â??no connectivityâ??. I get matching entries in the Application Event log (see details below). Any ideas on how to improve our internet response time would be greatly appreciated. Thanks, James B * SBS 2003 R2 Premium (all updates & service packs) - Running ISA 2004 (firewall, web proxy, etc) * Dell server (two 2.66 quad core Xeons, 1333 FSB, 4 GB RAM, dual Gb NICâ??s, 2 TB disk space) * AVG SBS Edition anti-virus Event Type: Error Event Source: Microsoft Firewall Event Category: None Event ID: 21137 Date: 7/7/2008 Time: 11:59:26 PM User: N/A Computer: server-name Description: The connectivity verifier "Web (Internet)" reported an error when trying to connect to http://server-name. Reason: The request has timed out. Event Type: Warning Event Source: Microsoft Firewall Event Category: None Event ID: 21138 Date: 7/7/2008 Time: 11:00:54 AM User: N/A Computer: server-name Description: The connectivity verifier "Web (Internet)" reported a slow connection to http://server-name. The specified connectivity response threshold was 5000 msec, and the monitored response time was 14000 msec. Tag: proxy setting policy removal Tag: 402122
  - 6
    - Applying SBS SP1 atop of Windows Server 2003 SP2 Hey Guys, Need to ask I ran the best practices analyzer tool on an SBS 2003 SP2 machine. Seems all the patches were applied EXCEPT Windows SBS 2003 SP1, Win2003 SP2 was already applied. I guess there are some updates to the POP connector and a few other SBS only updates in SBS SP1. My question is, will there be any issues applying SBS SP1 if 2003 SP2 has already been applied? Will I have to re-install SP2 after the SBS SP1 update is applied? What about Exchange SP2 should that also be re-applied after the SBS SP1 update? Thanks for any valuable advice, the SBS SP1 and Exchange service packs are not usually detected by windowsupdate. Tag: proxy setting policy removal Tag: 402120
  - 7
    - User Experience Questionaire I'm carrying out a review of a clients small business server network and as part of that i want to interview a selection of the users to find out what their experiences of the sbs network are. I'm going to ask them things such as: Do you experience any delay accessing files? Can you access the network remotely? If so what is the experience like? Are there any limitations with the current email setup? Do any of you folks carry out these user experience reviews? If so what other information do you look for? If anyone has a template questionaire they would like to share with me i'd appreciate it. thanks. Tag: proxy setting policy removal Tag: 402115
  - 8
    - Installing DFS on a Transitioned SBS 2003 Server. Hi All, Up until recently, we were running Small Business Server 2003 R2. We have now installed the transition pack on this server to now make it a full Windows 2003 Server (R2 I assume) I want to use the R2 version of DFS as we have branch offices that will benefit greatly from this but I cannot install Distributed File System from the Add/Remove Windows Components. Can someone please help me get DFS on this server? Tag: proxy setting policy removal Tag: 402100
  - 9
    - SBS 2003 licensing I hope this is the correct forum for this question. I have a SBS server in local office with the original 5 user CALs. We have up to 7 users although only 4-5 usually access the server at any one time. We have a remote office that has workstations that connect to the server to run various applications. They are using Terminal server. All workstations are XP Pro. We set up a backup server at the remote office which uses VPN, mounted disk and backup software to backup the server. The backup server worked fine at suppliers and could connect and backup OK when tested. When it was installed at the remote office it originally worked Ok but we are now experiencing connection problems; the VPN fails to connect. The remote workstations often experience problems as well. I sometimes have trouble using Remote Desktop Connection from my home office to the server as well. It has been suggested that the problem is related to licensing. If it is a licensing issue do we need more User CALs or do we need Termnal Server CALs? I am not familiar with licensing so please keep replies as simple as possible. Many Thanks Ket Tag: proxy setting policy removal Tag: 402091
  - 10
    - Website Certificate Problem This is a multi-part message in MIME format. ------=_NextPart_000_0093_01C8E171.AE40DE60 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi everyone, I've setup and configured SBS 2003 Standard Edition and apart from a few = teething problems with minor issues, everything seems to be working = fine. One of those minor issues however is a problem with the installed = certificate. As per the recommendations by Microsoft, I've configured the internal = domain as: <ServerName>.<DomainName>.local and when a user navigates to = this addresses from within the internal network using their browser, the = page displays just fine, but when a user navigates to = https://www.<DomainName>.com from outside the network over the internet, = they receive an error indicating 'There is a problem with this website's = certificate'. To be honest I would expect this anyway as the default certificate would = be configured for the Internal domain but is there a way to add a second = certificate for www.<DomainName>.com, users can obviously continue to = navigate past this certificate error page but it's more of an annoyance = than a problem and if someone can walk me through the process of adding = a secondary certificate (I've never done anything on the server to-date = with Certificate Authorities etc so this is a little new to me), I would = of course be most grateful. Many thanks in advance Wayne ------=_NextPart_000_0093_01C8E171.AE40DE60 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type = content=3Dtext/html;charset=3Diso-8859-1> <META content=3D"MSHTML 6.00.6000.16674" name=3DGENERATOR></HEAD> <BODY id=3DMailContainerBody=20 style=3D"PADDING-RIGHT: 10px; PADDING-LEFT: 10px; PADDING-TOP: 15px"=20 bgColor=3D#ffffff leftMargin=3D0 topMargin=3D0 CanvasTabStop=3D"true"=20 name=3D"Compose message area"> <DIV><FONT face=3DVerdana size=3D2>Hi everyone,</FONT></DIV> <DIV><FONT face=3DVerdana size=3D2>I've setup and configured SBS 2003 = Standard=20 Edition and apart from a few teething problems with minor issues, = everything=20 seems to be working fine. One of those minor issues however is a problem = with=20 the installed certificate.</FONT></DIV> <DIV><FONT face=3DVerdana size=3D2></FONT> </DIV> <DIV><FONT face=3DVerdana size=3D2>As per the recommendations by = Microsoft, I've=20 configured the internal domain as: = <ServerName>.<DomainName>.local=20 and when a user navigates to this addresses from within the internal = network=20 using their browser, the page displays just fine, but when a user = navigates to=20 <A title=3D"https://www.<DomainName>.com
      CTRL + Click to follow = link"=20 href=3D"https://www.<DomainName>.com">https://www.<DomainName>.com<= /A> from=20 outside the network over the internet, they receive an error indicating = 'There=20 is a problem with this website's certificate'.</FONT></DIV> <DIV><FONT face=3DVerdana size=3D2></FONT> </DIV> <DIV><FONT face=3DVerdana size=3D2>To be honest I would expect this = anyway as the=20 default certificate would be configured for the Internal domain but is = there a=20 way to add a second certificate for <A=20 title=3D"http://www.<DomainName>.com
      CTRL + Click to follow link"=20 href=3D"http://www.<DomainName>.com">www.<DomainName>.com</A>, = users can=20 obviously continue to navigate past this certificate error page but it's = more of=20 an annoyance than a problem and if someone can walk me through the = process of=20 adding a secondary certificate (I've never done anything on the server = to-date=20 with Certificate Authorities etc so this is a little new to me), I would = of=20 course be most grateful.</FONT></DIV> <DIV><FONT face=3DVerdana size=3D2></FONT> </DIV> <DIV><FONT face=3DVerdana size=3D2>Many thanks in advance</FONT></DIV> <DIV><FONT face=3DVerdana size=3D2>Wayne</FONT></DIV> <DIV> </DIV></BODY></HTML> ------=_NextPart_000_0093_01C8E171.AE40DE60-- Tag: proxy setting policy removal Tag: 402080
  - 11
    - Problem sending faxes with a cover page SBS 2003 R2 We are running SBS 2003 recently upgraded from SP1 to R2. When we try to send a fax through the server with a cover page the fax disappears and the following error is generated in the servers application log: _ Event Type: Error Event Source: Microsoft Fax Event Category: Outbound Event ID: 32090 Date: 7/8/2008 Time: 12:48:07 PM User: N/A Computer: % Description: The fax was not submitted successfully. The following error occurred: 2. This error code indicates the cause of the error. Sender Machine Name: \\%. Sender User Name: administrator. Sender Name: Administrator. Number of Recipients: 1. _ Faxes sent without a cover page go through fine. It was working properly before the upgrade to R2. Any thoughts or help would be appreciated. Thank you. Tag: proxy setting policy removal Tag: 402069
  - 12
    - RWW using Mac? Is it possible to do an RWW session (servername\remote then Connect to Client Computer) from a Mac? I can get to the \remote and select Connect to a Client Computer but it wants to download the ActiveX control to do an RWW session. The only problem is this is a Mac. What options do I have? Tag: proxy setting policy removal Tag: 402058
  - 13
    - Local Vista Profile Question I have a Vista Business client computer on an SBS 2003 R2 server. The user is complaining about everything being slow (ie takes 45 seconds to come up). When they log in under a different user name on the same computer everything works great. That makes me think it's a profile issue. Normally in Windows XP I just rename the c:\documents and settings\(username) folder to something else. The next time the log in a new profile is created for them and I just have to go to their old profile to grab their IE shortcuts and some desktop icon shortcuts. A new Outlook profile is created and their My Documents are in tact from the server. Simple process.... but when I do the same thing in Vista (although going to c:\users\(username) folder and renaming it, when go to log back in Vista is telling me there was an error with the profile and instead loads up a temporary profile and says no changes will be saved (shortcuts etc). Any ideas here? Thanks! -Richard K Tag: proxy setting policy removal Tag: 402057
  - 14
    - zeitarbeit ausland Kellner Kellnerin it jobs im ausland deutsche jobs zeitarbeit ausland Kellner Kellnerin it jobs im ausland deutsche jobs im ausland stellen jobboerse arbeiten und wohnen im ausland + + + ARBEITSANGEBOTE IM AUSLAND http://WWW.STELLENANGEBOT-AUSLAND.DE http://WWW.STELLENANGEBOT-AUSLAND.DE + + + AUSLANDSJOBS ONLINE FINDEN http://WWW.AUSLANDSJOBS-24.DE http://WWW.AUSLANDSJOBS-24.DE + + + ARBEITSANGEBOTE IM AUSLAND http://WWW.ARBEITSANGEBOTE-AUSLAND.DE http://WWW.ARBEITSANGEBOTE-AUSLAND.DE + + + ARBEITSANGEBOTE IN DEUTSCHLAND http://WWW.ARBEITSANGEBOT-DEUTSCHLAND.DE http://WWW.ARBEITSANGEBOT-DEUTSCHLAND.DE + + + STELLENANGEBOTE IN DEUTSCHLAND http://WWW.STELLENANGEBOT-DEUTSCHLAND.DE http://WWW.STELLENANGEBOT-DEUTSCHLAND.DE + + + Entbindungspfleger Entbindungspflegerin karriere ausland stellenangebote fuers ausland physiotherapie arbeiten im ausland arbeitsstelle im ausland will im ausland arbeiten soziale jobs im ausland Pharmareferent Pharmareferentin Tag: proxy setting policy removal Tag: 402053
  - 15
    - Slightly OT: Are you going for SBS 2008 this year, or will you wait? I ask this since I remember the old adage "never buy a new product until the first Servcie Pack is out"; however, I wonder if this is still true - at least for this product. Personally I'm leaning toward buying it this year or right after the new year (new budget cycle). Just curious what the feeling is among the readers/participants of this newsgroup. -- Mike Webb Platte River Whooping Crane Maintenance Trust, Inc. a conservation non-profit (501 (c)(3)) organization Wood River, NE Tag: proxy setting policy removal Tag: 402040
  - 16
    - SBS 2003 Exchange Error I keep getting the following message for e-mail messages sent to aol.com and comcast addresses. _____________________________________________ From: System Administrator Sent: Thursday, July 03, 2008 10:15 AM To: Ashley Subject: Undeliverable: 7/3/08 Payroll Your message did not reach some or all of the intended recipients. Subject: 7/3/08 Payroll Sent: 7/1/2008 10:13 AM The following recipient(s) could not be reached: anemail@aol.com on 7/3/2008 10:15 AM Could not deliver the message in the time limit specified. Please retry or contact your administrator. <servername.domainname.local #4.4.7> we just recently moved from Qwest DSL connection to a T1 connection. All e-mail is sent from our local workstations to mail.domainname.com that is hosted by another company. We are not using the SMTP connector inside of Exchange 2003 as far as I know. Any help would be appreciated DAN Tag: proxy setting policy removal Tag: 402035
  - 17
    - Script to copy Temporary Internet Files to Server? Having been asked to try and monitor internet usage for a small company I help with IT issues, I came across this article http://blogs.techrepublic.com.com/itdojo/?p=3D146&tag=3Dnl.e101 Quote Monitoring your users=92 Internet activity is an often unwelcome part of an IT professional=92s job. Few of us want to be the office=92s secret police. However, many companies require some level of Internet monitoring to ensure compliance with usage policies and to track problem users.If monitoring software is too costly for your IT department=92s budget, you may want to consider a technique that uses existing Windows XP and Windows Server 2003 functionality. In this IT Dojo video, I demonstrate a simple monitoring solution that uses Windows Server 2003 Group Policy. Before watching the video, you should realize this tip isn=92t right for every situation. This method uses Windows XP and Internet Explorer=92s local browsing history. To view the history files, you must physically visit each machine, remotely access the machine, or copy the files to a network location with a script. Furthermore, a sophisticated end- user could easily navigate to and delete the browser history. This monitoring technique is best suited when monitoring a small number of users, or better yet, a single, problem user. If you=92re looking for a more robust Internet monitoring solution, I recommend you go with a commercial service or application. As there are only 5 users, I though the script idea would be easy. I think it should be something like this copy C:\Documents and Settings\%userprofile%\Local Settings\Temporary Internet Files\*.* \\server\Internet\%userprofile%\ /y Would I add this to the SBS_LOGIN_SCRIPT.bat Regards Trevor Tag: proxy setting policy removal Tag: 402032
  - 18
    - FTP configuration & setup I would like help configuring SBS R2 to serve as a FTP server. Is there a KB article I can use? I did not see FTP as any windows component and setup a FTP site in IIS but it is looking for a home driectory html. A template like default web site ofr FTP would be most helpful. Thx Tag: proxy setting policy removal Tag: 402031
  - 19
    - Installing SBS How would one install SBS with the ability to selectively NOT install Exchange, SQL or SharePoint? We have an existing licesne for SBS and want to replace a server. I simply need an Active Directory server (DNS, DHCP, AD). Tag: proxy setting policy removal Tag: 402030
  - 20
    - Licensing, Activation, Backup, & Re-Installation. Help! I inherited a SOHO network after the SOHO business moved to a new location. They also changed business type and market. I wiped their servers and re-installed OS and software using what I found in cardboard boxes after the move. Some of the items which went into storage during the move never made it to the new office (or were damaged or tampered with). The SBS 2003 software is apparently of questionable authenticity (either that, or Microsoft's Activation system is buggy). I cannot activate the OS. I ordered a new set of CD's and key from Microsoft directly. What we received is SBS 2003 R2 Premium. The existing server won't recognize the key we received from Microsoft. Apparently, I must wipe and reinstall again with the new CD's and new key obtained directly from MS. However, I had already setup the server the way the SOHO owner/manager wants the system to work. I don't want to go through all of that again. What needs to be backed up, what needs to be restored, and what steps need to be taken (in what sequence) to wipe, re-install, activate, and have the system running exactly the way it is now (all the configurations, policies, shares, user accounts, etc.)? Thanks, Fred <>< P.S.: I'll have to perform a similar procedure again within a few months because the SOHO owner plans to buy a completely new server with SBS 2008 as soon as SBS 2008 becomes available. Tag: proxy setting policy removal Tag: 402026
  - 21
    - Running ASP.NET 2 and 1 with SBS I want to run our external website and the SBS CompanyWeb & RWW on the same SBS machine. I've setup the external site to use ASP.NET 3.5 and when I try to navigiate the RWW from an internal client machine I get the following event viewer message: Event Type: Error Event Source: ASP.NET 1.1.4322.0 Event Category: None Event ID: 1062 Date: 7/8/2008 Time: 10:49:34 AM User: N/A Computer: ENERGYACUITYSV1 Description: It is not possible to run two different versions of ASP.NET in the same IIS process. Please use the IIS Administration Tool to reconfigure your server to run the application in a separate process. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. I tried creating a 2nd AppPool for the external site using .NET 2.x and left the default pool running 1.x, but I still get the above error. Any suggestion for a work around? Thanks Tag: proxy setting policy removal Tag: 402013
  - 22
    - SBS Warning: Routable IP Address During installation of SBS I get the warning: The network adapter selected to access the local network is assigned a routable IP address. As a result, the DHCP service on the server cannot be installed and then configured by Setup. It is recommended that you use a private IP address for your server's local network adapter, as this is a more secure configuration. Here are the settings on our network: SBS: 172.200.0.5 AD Server: 172.200.0.1 Gateway: 172.200.0.1 DHCP: 172.200.0.50 and up Should we use different IP addresses? Note that we have about 10 devices with static IPs and maybe another two dozen devices with DHCP. What would we have to do if we keep these IP addresses? Tag: proxy setting policy removal Tag: 402008
  - 23
    - Paging Size Requested Exceeds limit Allowed I recently ran into an error message iin my event logs that said my system resources were very low. I did some research and it said the size of the paging file was likely set too low. I'm running SBS 2003 with 4 gigs of Ram, when I look at the properties for my paging file, it says the current size is 3701 MB but that it recommends I set it to 4606. The problem is the paging file has a max upper limit of 4096. any Ideas what is going on? I'm running the following SBS 2003 STD - Current on all service packs and updates. Norton Information foundation - Exchange Mail Virus/Spam protection Norton Endpoint Protection - Server Virus protection Thanks in advance for any replies. Roman Tag: proxy setting policy removal Tag: 402006
  - 24
    - DHCP Problem Very strange problem for you all. We have a server running SBS 2003 configured for remote access via VPN's. Everything works fine except for the VPN clients get disconnected regularly. By regular I mean the same time every hour. The time they are disconnected coincides with when DHCP service was last started. So if DHCP service was started at 10:05 the VPN users are disconnected every 5 past the hour. I've done a network trace and sure enough every hour there are 4 DHCP Discover packets followed by 4 DHCP offer packets. The client MAC address inside this packet is 00:00:00:00:00:00 and hence no machine is actually assigned the offered IP address. What could be causing the zero mac address request? Tag: proxy setting policy removal Tag: 402001
  - 25
    - BitBob -- are you out there? Need experienced help with Outlook over Hello sir Bitbob. I have to ask you a favor , and thank you in advance for any consideration. A while back you posted about a client computer that could not use Outlook over the internet. Authentication error or something of that nature. I seem to be having the same problem and am going through all the steps you went through as well as doing my own troubleshooting. still no resolution. Do you recall what fixed the problem for you? Thanks for any help Barre here are the posts and threads fwiw . please preface with the http etc groups.google.com/group/microsoft.public.windows.server.sbs/ browse_thread/thread/8a4d5f55e2a4a7b0/921aea7916325e3b?lnk=st&q=outlook +rpc+problems+with+this+web+page#921aea7916325e3b groups.google.com/group/microsoft.public.windows.server.sbs/ browse_thread/thread/c7859f60c2427068/ d277ad52309fc44d#d277ad52309fc44d Tag: proxy setting policy removal Tag: 401992
- Next
  - 1
    - Re:Connecting to a remote sbs from a website? Hi, Would I be able to connect from a website to a small business server by using servlets?If I did,what parameters would I have to declare in order to initialise the connection? Thanks Tag: proxy setting policy removal Tag: 401978
  - 2
    - Using SBS for non production testing I know this is probably not the right place for this post but no other forum seemed relevant. I have an SBS customer that allows people in his employment to carry out testing of their company's products on their production SBS server. I know this is a big no no but i'm having trouble explaining why to the customer. Why would you guys seperate the testing of a company's products from the production network and/or production SBS server? thanks, Tag: proxy setting policy removal Tag: 401977
  - 3
    - Re:Connection Hi, Would I be able to connect from a website to a small business server by using servlets?If I did,what parameters would I have to declare in order to initialise the connection? Thanks Tag: proxy setting policy removal Tag: 401973
  - 4
    - Slow access to network files in SBS Premium 2003 I just upgraded a client from a Server 2000 basically running in Workgroup mode to a SBS 2003 Premium running full Active directory/Domain services. Now some of the users are complaining that it is taking longer to access their files that are stored on the server. They are mainly small files too, mostly Excel and Word files. The server is plenty 'beefy' with 4GB of RAM, Xeon processor, and RAID 5 SCSI drives all on a 100 megabit switched network. Is there anything I can check or tweak to help speed up network access?? Thanks. Tag: proxy setting policy removal Tag: 401965
  - 5
    - Printers not Publishing I installed a new printer on an SBS 2003 R2 Premium server via the To Do List/Add Printer wizard. Everything worked great. When I had the XP clients log off and log back on (even tried restarting XP client) the printer did not appear in their list of available printers. I am pretty sure if I add a printer the way I did it should be published to everyone without each user going through the steps of Adding a printer on their XP machine. What am I missing here? Tag: proxy setting policy removal Tag: 401964
  - 6
    - Installation locks up eating memory Hi I posted a few days ago about a problem with SBS2003 fresh install locking up during server tools setup on Internet Explorer 6.0 installtion. I had a reply saying it was probably due to an active internet connection. Since this i have installed a brand new harddrive and pulled the plug on the router while attempting the setup. Again the initial part of the setup is fine, its when it gets to the actual server configuration. Its gets as far as installing server tools, the message says its doing internet explorer 6.0. Ive left it at this point for several hours and it gets no futher. A look in the process list shows the setup process is just eating more and more memory. After a few hours it was up past 1gb of memory. I searched the harddrive for what was growing as i was also loosing harddrive space during this point. It turned out it was a log file (eventlog.txt) it keeps adding the same lines over and over again - these are [07/04/08,09:37:38] Setup.exe: GetCustomProperties() [07/04/08,09:37:38] Setup.exe: get_CustomProperties() [07/04/08,09:37:39] Setup.exe: GetCustomProperties() [07/04/08,09:37:39] Setup.exe: get_CustomProperties() [07/04/08,09:37:39] Setup.exe: GetCustomProperties() [07/04/08,09:37:39] Setup.exe: get_CustomProperties() [07/04/08,09:37:39] Setup.exe: GetCustomProperties() [07/04/08,09:37:39] Setup.exe: get_CustomProperties() [07/04/08,09:37:39] Setup.exe: GetCustomProperties() [07/04/08,09:37:39] Setup.exe: get_CustomProperties() [07/04/08,09:37:39] Setup.exe: GetCustomProperties() [07/04/08,09:37:39] Setup.exe: get_CustomProperties() [07/04/08,09:37:39] Setup.exe: GetCustomProperties() [07/04/08,09:37:39] Setup.exe: get_CustomProperties() Ive got lots more logs, but i cant attach them as the message is too big then. The only other thing that mmight be of use was the errorlog.txt - this has the following in [07/04/08,08:35:48] setup.exe: [2] continue setup link may not work properly. Please relaunch via add remove programs or from CD. [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an InstallProblem while trying to set install action override: Microsoft Exchange Messaging and Collaboration Services [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an InstallProblem while trying to set install action override: Microsoft Exchange System Management Tools [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an InstallProblem while trying to set install action override: Microsoft Exchange Domain Preparation [07/04/08,08:36:06] setup.exe: [2] ISetupComponent had an InstallProblem while trying to set install action override: Microsoft Exchange Forest Preparation [07/04/08,08:36:06] setup.exe: [2] Could not set IR_MAINT on component: Updating Configuration [07/04/08,08:38:00] WizardUI: [2] ISetupManager::GetGlobalCustomProperty() failed in CPageBase::GetGlobalProperty(): GUID = {F205AE18-9D39-4E3C-A4BA-12FBA060ED91} [07/04/08,08:44:40] Microsoft Integration: [2] ISetupDataFile::GetPropertyValue() failed for account information in ISetupManager::LoadPersistantComponentData(): filename = C:\Documents and Settings\Administrator\Local Settings\Temp\SIT29289.tmp\REBOOT.INI, component ID = {829300FF-C155-11D2-92EF-00C04F79F1A8}\{DC3074B0-7DE8-43C5-B907-E9100CB5FFF2}, property name = (null) [07/04/08,08:44:40] Microsoft Integration: [2] ISetupDataFile::GetPropertyValue() failed for account information in ISetupManager::LoadPersistantComponentData(): filename = C:\Documents and Settings\Administrator\Local Settings\Temp\SIT29289.tmp\REBOOT.INI, component ID = {829300FF-C155-11D2-92EF-00C04F79F1A8}\{F333D98A-C152-11D2-92EF-00C04F79F1A8}, property name = (null) [07/04/08,08:44:41] Microsoft Integration: [2] ISetupComponent::SetInstallActionByUniqueID() failed in ISetupManager::LoadPersistantComponentData(): component name = {685BC054-BB6F-46DB-8DB2-C2DB17DE3E8F}\{1F3267B2-721A-49E5-B688-3A10B81C0A8D}, action id = 2 [07/04/08,08:44:41] setup.exe: [2] ISetupManager::AddGlobalCustomProperty failed in ISetupManager::LoadPersistantData() ({df8ff64a-1967-4871-9e32-ca2f819bab81}) [07/04/08,08:44:42] setup.exe: [2] ISetupManager::AddGlobalCustomProperty failed in ISetupManager::LoadPersistantData() ({c248d3e3-632d-4435-888a-83035c144737}) [07/04/08,08:48:04] WizardUI: [2] ISetupManager::GetGlobalCustomProperty() failed in CPageBase::GetGlobalProperty(): GUID = {FBCCE6F3-9E2D-464D-A4E7-12FBFD515395} [07/04/08,08:48:04] WizardUI: [2] ISetupManager::GetGlobalCustomProperty() failed in CPageBase::GetGlobalProperty(): GUID = {FBCCE6F3-9E2D-464D-A4E7-12FBFD515395} [07/04/08,08:49:42] Server Configuration: [2] Admin: Couldn't get group container for [LDAP://CN=Internet Users,OU=Security Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local] [07/04/08,08:49:42] Server Configuration: [2] Admin: Couldn't get group container for [LDAP://CN=Internet Users,OU=Security Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local] [07/04/08,08:49:43] Server Configuration: [2] Admin: Couldn't get group container for [LDAP://CN=Internet Users,OU=Security Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local] [07/04/08,08:49:43] Server Configuration: [2] Admin: Couldn't get group container for [LDAP://CN=Internet Users,OU=Security Groups,OU=MyBusiness,DC=BlackerSheepLtd,DC=local] [07/04/08,09:20:18] Monitoring: [2] The instance ID in monitoring reg key is bogus, deleting... [07/04/08,09:20:18] Monitoring: [2] RegOpenKeyEx(Software\Microsoft\Microsoft SQL Server) failed with 80070002 [07/04/08,09:22:04] Networking: [2] An error occurred while copying files for the Networking component. See C:\Program Files\Microsoft Integration\Windows Small Business Server 2003\Logs\SBSMSI-Connectivity.LOG for the list of files that were not copied. You may want to run Setup again and reinstall the component. [07/04/08,09:22:05] Intranet: [2] Failed to get version regkey in CClientX::HrGetSTSVersion. This is a clean install of ClientX. [07/04/08,09:26:53] Client Deployment: [2] Failed to set DACL to C:\Program Files\Microsoft Windows Small Business Server\ClientSetup\Clients [1] [07/04/08,09:26:53] Client Deployment: [2] Failed to set DACL to C:\ClientApps [1] [07/04/08,09:27:00] Client Deployment: [2] Error copying service packs with error [3]. Any help on this would be great. Tag: proxy setting policy removal Tag: 401954
  - 7
    - Migrating SBS 2003 To new hardware - Need Help! Sorry for this, but I really need some advice... I am moving an old SBS 2003 installation to new hardware (with new licenses). I am following the Technet whitepaper "Migrating Windows Small Business Server 2003 to New Hardware". I completed Step 2 of the white paper and was waiting for "Line of Business" application developer to set a date of when they can be on site to move their application before I proceeded to migrate Exchange. In the mean time, the server started rebooting today every hour with event codes 1001, 1012, 1011. The event codes say that I am in violation of EULA since I have two SBS servers in the same domain (following the instructions from Technet as described in the white paper above). It appears that there is a two week limit on having two domain controllers on the same SBS Domain! So... with my customer's application server rebooting every hour (this really isn't funny - Nagware at its worst!), does anyone have a suggestion? - Is there a way to lengthen or reset the timer? Two more weeks would do it. - Can I reverse the steps in the white paper and restart when the vendor is ready? This would be painful as the original process took 4 - 5 hours to get this far (the old hardware is lacking). - Proceeding with the installation cannot occur for a couple of days, which means the Doctor's office server will reboot 20 - 30 times... Thanks for any and all advice... Tag: proxy setting policy removal Tag: 401904
  - 8
    - Public shared contacts in exchange 2003 for outlook users Two needs around public folders: 1. One of my customers needs several groupings of public address list of various orginization groups that can be set up by a clerk and read by the staff managers. My understanding is that you can do this in exchange, but so far my seaching has not yet found the "how to" document on microsofts technet. Can you point me to the right place? 2. The CEO also wants these new list to sync with his palm. Is this even possable? Tag: proxy setting policy removal Tag: 401897
  - 9
    - Server Management Console Has Blank Pane SBS 2003 SP2 Standard Edition. Server has been the most stable of all the ones I look after. Event logs squeaky clean, etc. Trouble started within a week of installing AVG 8.0 Anti-Virus SBS Edition. Coincidence? Symptom is that there is a blank pane displayed for every node one clicks on in server manager except for some of the Advanced Management nodes. I have set the usual scan exceptions with AVG but it makes not difference. All services are running and the event logs are clean. I have done an IIS reset but no joy. Any idea how I might get to the bottom of this? Tag: proxy setting policy removal Tag: 401891
  - 10
    - DNS Configuration I have one machine running SBS 2003 SP 2. DNS is configured on this machine. Recently we had a website set up for us but hosted outside. I can't access our website from our network as I keep getting error messages that the page could not be displayed. I have no problem accessing the webside from anycomputer outside our network. I pinged domainname.org and got replies from my Server's internal IP address. I then pinged www.domainname.org and got the message that "ping request could not find host www.domainname.org." Since this looks like an internal DNS issue, where in the DNS Manager can I go to and have www.domainname.org point at the correct IP address? Thank you in advance. Tag: proxy setting policy removal Tag: 401887
  - 11
    - EventID 221 Good evening! Have a client who is terribly under-licensed: SBS2003 Premium. I remoted into their server today to do something and was greeted with the warning. I then looked in the Event Viewer and in the Application Log saw the 221. This Event ID ed for appeared for the first time today (kinda surprised that it took this long....). Question: what happens next (and 'client purchasing sufficient CALs' is not necessarily the answer....)? I know that with 'normal' Windows you can disable the Licensing Server. That service is flaky at best. I have done it at least 75 times in the last two years. No repercussions (but, then, all the clients are properly licensed!). However, I *know* that many things are different with SBS2003. Let's just assume for a moment that the client is not going to take our recommedation (today formally via e-mail; made many times over the last year verbally....) to purchase an additional XX number of User CALs. Will the system let only the first 20 users log on (as they do have 20 User CALs - at least this is what I see in the LICENSING section of Server Management) and deny every subsequent user that trys to log on? I have heard that this will happen but have never seen any documentation. If so, when does this start? Next week? Next month? We need to advise our client what their time frame is (if it were up to me we would not be in this situation to begin with....). Thank you, Cary Tag: proxy setting policy removal Tag: 401881
  - 12
    - SBS 2003 and TS 2008? Can a Windows 2008 Server Terminal Server co-exist with a SBS 2003 server? If so, how do you setup the licensing server? Has anyone done this? Thanks, Shelly Tag: proxy setting policy removal Tag: 401846
  - 13
    - Existing Server 2000 add SBS 2003-same domain or new? I have a simple one machine domain using Windows Server 2000. Exchange is not currently being used (but will be in the sbs 2003). I have just purchased SBS 2003 preloaded from Dell on a new server and I want to add it so it is the "main" machine for the company but would like to have the users have the same logins etc that they have using the existing windows 2000 server. Not sure what to expect when I plug the new Dell into the existing network and walk through any wizards that may appear. I have seen much documentation but still not sure best/easiest way to do this so that the SBS 2003 has all the roles it needs and the original windows 200 server can be either just used as a file server or taken off line without any domain consequences. Or would it just be easier to create a new domain with the new SBS 2003 and reconfigure users. Not sure what happen to their Outlook stuff etc as that is login dependent on the old domain? There are 7 users in the company. Thanks, sd Tag: proxy setting policy removal Tag: 401839
  - 14
    - CALs/unable to create mailboxes I've just purchased 10 more user CALs for small business server 2003, specifically two of the per-user 5-CAL type (T74-00002). I had 20 CALS installed previously. Running SBS 2003 Sp2. I'm running into a problem now when I create a new user with an email address using the wizard, and the mailbox is not created. Logging in with outlook and OWA doesn't create the mailbox, in fact I get errors. OWA returns an "http/1.1 503 Service Unavailable" error, and Outlook returned an error that I'm assuming has something to do with the mailbox not existing (don't remember the exact wording.) I've sent test emails as well. I've since rebooted the server, and based on some information on the web had both 'updated' and 'rebuilt' the Recipient Update Service from the exchange manager, but still no mailboxes. I count a total of 20 mailboxes, I seemed to be maxed out even though I should have 30 now. Is it a problem with the CALs, or is there something else I need to do? Thanks, Tag: proxy setting policy removal Tag: 401838
  - 15
    - coffee shop wireless access I am planning a wireless network for a coffee shop and was wanted to get some recomendations on hardware. I am looking for a wireless device that would have the following features: remote admin content filtering initial connection to coffee shop page that requires logon to access to internet hides wireless conections from each other so users cannot see each others computers when connected Thanks for the help! Tag: proxy setting policy removal Tag: 401837
  - 16
    - Problem Installing SBS Into Existing AD Domain I am trying to install SBS2003 R2 into an existing AD Domain following this procedure: http://support.microsoft.com/kb/884453/en-us I get stuck at transfering the schema master role. When selecting the sbs computer name (step 9.e.h) I get the error message "The following Active Directory error occurred: The Domain Controller could not be set. The parameter is incorrect.". I tried to go to "Active Directory Users and Computers" and connect to the AD server (x.y.com) as well as the sbs (xsbs.y.com) but I still got the same error. Please note that I log into the sbs with the administrator account that is used on the AD server. I could not login with a local account (don't know why). Also note that in "Active Directory Users and computers" the current domain controller is listed as x.y.com (AD server) and bellow I have three entries ("Any...", x.y.com, xsbs.y.com). Thanks for any help. Tag: proxy setting policy removal Tag: 401836
  - 17
    - Data packet flowing through SBS/Exchange Hi, I need to find out how much data size or number of emails do we have going in and out of Exchange on our SBS server in order to get some statistic. Is there a way to determine this or would I have to buy a 3rd party software? Thanks, Helen Tag: proxy setting policy removal Tag: 401834
  - 18
    - .v01 files I am getting .v01 files backing up when doing a NT backup to a removable HD. Has anyone else had this same problem? If so is there any other way to get ride of them other than adding a line to my .bat file to remove any .v01 files Tag: proxy setting policy removal Tag: 401829
  - 19
    - Installed BES (Blackberry Enterprise Server) now SQLServer process is I recently installed BES pro software to integrate my own blackberry with outlook. A few days later I started getting a critical error in my daily performance report that a task was taking up a lot of memory. The task was a SQLSERVER. Looking in taskmgr I have 3 instances of SQLSERVER running, one at 45 megs, one at 50 megs and one at 945 megs. 1. Anyone ever seen BES do this to a server? 2. How do I tell which instance of SQLServer belongs to which process? 3. Help!!! Luckily I'm in limited production with this server so it's not impacting anyone, but I need to get this fixed before I move my other users to the server. Thanks, Roveer Tag: proxy setting policy removal Tag: 401823
  - 20
    - Barracuda Spam Firewall and ISA 2004 I'm setting up a Barracuda Spam Firewall on my SBS 2003 premium network. I can't get ISA to forward mail to the Barracuda. I've created a computer in isa with the Barracuda's ip address. Then I go into the smtp firewall policy and delete localhost and put in the barracuda. email no longer goes through. What am i doing wrong? Thanks Keith Tag: proxy setting policy removal Tag: 401820
  - 21
    - Development SBS on Production Backbone Hello I have installed a SBS R2 Prem Trial (SQL, single NIC no ISA) on a new box. Initially we will be using it for some software development work our company is having done. I realize that we can't have two SBS servers on the same AD Domain. Right now I have set it up completely separate from our Production SBS but cat wiring is limited in our building and it is a hastle getting everthing to work (like the internet phone at my desk) without running wires all over the place or swaping stuff back and forth. My question is. If this new SBS box, has a different name, different Domain, different IP address range (192.168.16.x on production, 192.168.15.x for dev) different static ip, router and gateway for internet. Can I connect it to the same physical network backbone (as is) without causing problems? Will I need to disable DHCP on the dev server? Thanks Terry Mc Tag: proxy setting policy removal Tag: 401805
  - 22
    - Event Logs Gone Wild! Greetings, My event log files are too big and I want to reduce them. Currently Security is 212,000 items and Application is a 110,000 items. Scrolling through these has become unmanagable. MS says that they cannot be deleted but this is wrong, I just want some advice on how to do it the "right" way. Liam Tag: proxy setting policy removal Tag: 401803
  - 23
    - How to identify SBS 2003 R2 I am very confused with "Small Business Server 2003" and "Small Business Server 2003 R2". How do you identify (or determine) which version is running? Are the SBS service packs (SP1 and SP2) applicable to both versions? (ie. is there a different version of SP1 or SP2 for SBS 2003 and SBS 2003 R2). Tag: proxy setting policy removal Tag: 401801
  - 24
    - Inetinfo.exe dragging server and email down I have inetinfo.exe at 2 GB memory usage and increasing! Outgoing and Incoming mail has stopped and I looked in the Queues under Exchange System Manager and found 20,000 plus mails waiting to go out. We only send between 5 - 10 email a day. What has happened as it is gragging everything down. SBS2002 SP2 Help, cheers Andrew Tag: proxy setting policy removal Tag: 401800
  - 25
    - POP Connector failing consistently Hello I have run my SBS2003 SP2 for a few years with very little pain at all. My incoming mail is captured from an external server via POP and distributed locally using the built-in POP Connector. In the last few weeks, I have been having problems with the connector failing every couple of days. The mail just stops coming through. I look at the running service and it displays "shutting down" but never seems to do so. Due to the "shutting down" status, I am unable to stop or restart the service. The only solution is to reboot the server. Upon reboot, the POP Connector works properly for a day or so until the next failure. The error log for POP Connector reads as follows: " Event Type: Error Event Source: POP3 Connector Event Category: Core Event ID: 1000 Date: 07/07/2008 Time: 05:45:37 User: N/A Computer: DELLSERVER Description: CIMBService::LaunchDownloadManager, CreateProcess(DownloadMgr) Error: Access is denied. (-2147024891) " I have looked around the net but find little to go on. Your assistance would be welcome. Thanks Lee Stone Tag: proxy setting policy removal Tag: 401799

I am running a sbs2000 system. We currently have the ISA installed, but are
not using it. We have a hardware firewall we are using for security. Once
in awhile the desktop machines will get an error because they are trying to
use the server as the proxy instead of going directly to the internet. Is
there a way I can remove any proxy policy(s) or even create a policy that
makes sure that there are no proxy settings?

Top

Re: proxy setting policy removal by Marina

Marina
Wed Jul 09 15:43:50 PDT 2008

Hi,

Remove the ISA Firewall client from the workstations. Remove ISA from the
server. Rerun the ICW.

--
Regards,

Marina Roos
Microsoft SBS-MVP
One of the Magical M&M's
www.smallbizserver.net
Take part in SBS forum: http://www.smallbizserver.net/Default.aspx?tabid=53
"SBS user" <user@domain.com> wrote in message
news:eAqE0Ve4IHA.5112@TK2MSFTNGP05.phx.gbl...
>I am running a sbs2000 system. We currently have the ISA installed, but
>are not using it. We have a hardware firewall we are using for security.
>Once in awhile the desktop machines will get an error because they are
>trying to use the server as the proxy instead of going directly to the
>internet. Is there a way I can remove any proxy policy(s) or even create a
>policy that makes sure that there are no proxy settings?
>

Top