Sharepoint Extranet disabled RWW

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Remote Server Administration Tools for Vista SP1 Released The Remote Server Administration Tools for Vista have been released. This is the tool set that replaces the adminpack.msi tools pack for XP. Vista SP1 is required. Once you run the installer, you have to go to CP -> Programs and Features -> Turn Windows features off or on. I recommend taking a look at these - I do all my server admin from my desktop PC, and these tools let me skip RDP for most simple functions. Microsoft Remote Server Administration Tools for Windows Vista SP1 32-bit Edition http://www.microsoft.com/downloads/details.aspx?FamilyId=9FF6E897-23CE-4A36-B7FC-D52065DE9960&displaylang=en Charlie already knows about this, but for the other 64-bit user: Microsoft Remote Server Administration Tools for Windows Vista SP1 64-bit Edition http://www.microsoft.com/downloads/details.aspx?FamilyId=D647A60B-63FD-4AC5-9243-BD3C497D2BC5&displaylang=en Tag: Sharepoint Extranet disabled RWW Tag: 387403
  - 2
    - Exchange Users Although we only have a limited number of SBS users, we are quickly running out of Exchange managed mailboxes. Ultimately we will have 200+ mailbox users so presumable will have to add a separate Exchange Server to our SBS controlled domain? Is this the way to do it or should we be thinking of a different configuration? TIA, JohnK p.s. We already have a separate terminal server providing access for various regional offices access to a server hosted application. Tag: Sharepoint Extranet disabled RWW Tag: 387385
  - 3
    - NTFRS 13552 and 13555 Erorrs on SBS 2003 Following Tornado I'm running SBS 2003 Premium w/sp2 (not R2). A few weeks back, we were hit by the tornado that came through Atlanta and the server sustained a shutdown due to power events that overwhelmed our APC UPS. Following the event, I'm now getting several NTFRS 13552 and 13555 errors in my SBS event log. The FRS error status is FrsErrorMismatchedJournalId. I've done a good bit of research on these errors, but I'd like to get some feedback from the SBS gang to correct the issue. Currently, the FRS service will start, but it will post these errors in the event log. The SYSVOL and NETLOGON shares are functioning properly and the users can login just fine on the network. Also, my SBS Group Policies are working fine. I do not have any other domain controllers, but I do have one member server running MS-Windows 2003 Server w/sp2. Symantec AV is set to exclude the necessary folders from realtime scanniing like SYSVOL. I do also have a good backup of the SystemState from before the store with Veritas Backup Exec 9.1. What would be the best recommendation to correct this issue. I'm guessing that I can perform a non-authoritative restore using my backups of the SystemState, but I'd like to try the baby steps first. Thanks for any guidance. Ken Tag: Sharepoint Extranet disabled RWW Tag: 387383
  - 4
    - SBS Backup & NAS devices This is SBS 2003 R2 Premium. On the LAN we have two NAS devices. One (A) is not joined to the Domain but can be accessed via the LAN. It has a list of authorised users and is setup so the user Administrator can access all areas. The other (B) has been joined to the domain, and uses the domain users for access control. Again Administrator can access all areas. If we use the Backup wizard and configure it to backup to A and a specific folder, it then runs quite happily (if a little slowly) and the backup files duly appear (until it runs out of space!!). If we use the Backup Wizard and configure it to backup to B and a specfic folder (with the same access privileges as A) and then run it, the process creates the sub-folder "Backup Files" (as it does above), but then fails unable to access the folder. At this point there is an empty file in Backup Files and it wont let me look at it as I (Administrator) dont have sufficient privileges. I've tried changing the ownership permissions of both the file and the folder but it still wont allow me to access the file or delete it. So, my question is, why is the Backup process creating a folder and file with different ownership and privileges, and what are they? TIA, JohnK Tag: Sharepoint Extranet disabled RWW Tag: 387382
  - 5
    - SBS Setup Error: An error occurred while creating user accounts... I'm hoping somebody has seen this error before and knows how to get by it. I have a brand new, fresh install of SBS (brought current settings over via a swing migration, had no issues that I can identify with that). I have rebuilt the server completely a few times, so I can pretty much rule out a bad install. At the end of the SBS Setup, I get the error: "An error occurred while creating user accounts. Open Active Directory Users and Computers, manually create a test user to verify that Active Directory is running. Rerun setup." I'm then prompted to restart the server, but it doesn't think it has finished the setup successfully and still keeps the "Continue Setup" icon on the desktop. Everything is functional from what I can see: Exchange, OWA, Companyweb, etc. I have included logs from that setup below. Please let me know if you'd like any additional information. Thanks! setup.log: everything successful except the following [Setup run at 16:01:10 on 03/25/08] Component Name: Server Configuration Version: NA Installation Status: Failure Error Message: An error occurred while creating user accounts. Open Active Directory Users and Computers, and manually create a test user to verify that Active Directory is running. Rerun Setup. errorlog.txt: [03/25/08,15:09:56] Domain Configuration: [2] copying the sbswmi.exe file to the temp directory failed. [03/25/08,15:09:58] setup.exe: [2] Could not set IR_MAINT on component: Updating Configuration [03/25/08,15:10:06] WizardUI: [2] ISetupManager::GetGlobalCustomProperty() failed in CPageBase::GetGlobalProperty(): GUID = {F205AE18-9D39-4E3C-A4BA-12FBA060ED91} [03/25/08,15:10:06] WizardUI: [2] ISetupManager::GetGlobalCustomProperty() failed in CPageBase::GetGlobalProperty(): GUID = {F205AE18-9D39-4E3C-A4BA-12FBA060ED91} [03/25/08,15:10:12] Licensing: [2] FindLinkByTarget failed to find the licensing link with error [-2147024894]. [03/25/08,15:10:12] Licensing: [2] UpdateLinkPath failed to update the licensing link with error [-2147024893]. [03/25/08,15:10:16] WizardUI: [2] ISetupManager::GetGlobalCustomProperty() failed in CPageBase::GetGlobalProperty(): GUID = {FBCCE6F3-9E2D-464D-A4E7-12FBFD515395} [03/25/08,15:10:16] WizardUI: [2] ISetupManager::GetGlobalCustomProperty() failed in CPageBase::GetGlobalProperty(): GUID = {FBCCE6F3-9E2D-464D-A4E7-12FBFD515395} [03/25/08,15:12:04] Server Configuration: [2] Admin: Couldn't get group container for [LDAP://CN=Internet Users,OU=Security Groups,OU=MyBusiness,DC=FMFECPA,DC=LOCAL] [03/25/08,15:12:04] Server Configuration: [2] Admin: Couldn't get group container for [LDAP://CN=Internet Users,OU=Security Groups,OU=MyBusiness,DC=FMFECPA,DC=LOCAL] [03/25/08,15:12:04] Server Configuration: [2] Admin: Couldn't get group container for [LDAP://CN=Internet Users,OU=Security Groups,OU=MyBusiness,DC=FMFECPA,DC=LOCAL] [03/25/08,15:12:05] Server Configuration: [2] Admin: Couldn't get group container for [LDAP://CN=Internet Users,OU=Security Groups,OU=MyBusiness,DC=FMFECPA,DC=LOCAL] [03/25/08,15:12:05] Server Configuration: [2] Failed to remove STS Worker from Domain Users with error [0x80004002]. [03/25/08,15:12:05] Server Configuration: [2] Failed User Creation with [0x80004002] [03/25/08,15:12:05] Server Configuration: [2] Extended Error Code: [0] Error Text: [] Provider: [LDAP Provider] [03/25/08,15:12:05] Server Configuration: [2] An error occurred while creating user accounts. Open Active Directory Users and Computers, and manually create a test user to verify that Active Directory is running. Rerun Setup. [03/25/08,15:12:05] Server Configuration: [2] CSuiteHelpComponentRoot::PreInstall: RefreshAdmin failed with error [80004002]! [03/25/08,15:38:40] Monitoring: [2] The instance ID in monitoring reg key is bogus, deleting... [03/25/08,15:38:40] Monitoring: [2] RegOpenKeyEx(Software\Microsoft\Microsoft SQL Server) failed with 80070002 [03/25/08,15:41:35] Intranet: [2] HrRegisterFaxRtExt failed in CClientX::DoInstall hr= [80070005] [03/25/08,15:42:13] Client Deployment: [2] Failed to set DACL to C:\Program Files\Microsoft Windows Small Business Server\ClientSetup\Clients [1] [03/25/08,15:42:13] Client Deployment: [2] Failed to set DACL to E:\ClientApps [1] [03/25/08,15:59:30] Networking: [2] Failed to stop the POP3 Connector service with error [80070426]. [03/25/08,16:01:37] WizardUI: [2] ISetupManager::GetGlobalCustomProperty() failed in CPageBase::GetGlobalProperty(): GUID = {63ECC03C-3D58-4074-903D-E80CFC5BDC25} [03/25/08,15:53:33] setup.exe: [2] ModuleID not found in map in GetSetupComponentByModuleID() -- [{DA943894-7A14-4FFF-BBDC-C004FAE2310B}] [03/25/08,15:53:33] setup.exe: [2] ModuleID not found in map in GetSetupComponentByModuleID() -- [{94B7AD3E-0B63-42AC-A542-082ED1F78787}] [03/25/08,15:53:34] setup.exe: [2] ModuleID not found in map in GetSetupComponentByModuleID() -- [{ECD1A63D-DBAF-442C-BF46-904364A96B00}] [03/25/08,16:06:51] Microsoft Integration: [2] ISetupComponent::SetInstallActionByUniqueID() failed in ISetupManager::LoadPersistantComponentData(): component name = {CC739A48-6034-4AA1-9A87-D79A22B6A718}, action id = 2 [03/25/08,16:06:52] Microsoft Integration: [2] ISetupDataFile::GetPropertyValue() failed for account information in ISetupManager::LoadPersistantComponentData(): filename = C:\Program Files\Microsoft Integration\Windows Small Business Server 2003\REBOOT.INI, component ID = {829300FF-C155-11D2-92EF-00C04F79F1A8}\{DC3074B0-7DE8-43C5-B907-E9100CB5FFF2}, property name = (null) [03/25/08,16:06:52] Microsoft Integration: [2] ISetupDataFile::GetPropertyValue() failed for account information in ISetupManager::LoadPersistantComponentData(): filename = C:\Program Files\Microsoft Integration\Windows Small Business Server 2003\REBOOT.INI, component ID = {829300FF-C155-11D2-92EF-00C04F79F1A8}\{F333D98A-C152-11D2-92EF-00C04F79F1A8}, property name = (null) [03/25/08,16:06:52] Microsoft Integration: [2] ISetupComponent::SetInstallActionByUniqueID() failed in ISetupManager::LoadPersistantComponentData(): component name = {1E4B415E-4CEC-44EB-B90F-A7B3F04C8A6D}, action id = 2 [03/25/08,16:06:52] Microsoft Integration: [2] ISetupComponent::SetInstallActionByUniqueID() failed in ISetupManager::LoadPersistantComponentData(): component name = {D6F52195-649D-4FAD-B43D-F4618503CFB2}, action id = 2 [03/25/08,16:06:52] Microsoft Integration: [2] ISetupComponent::SetInstallActionByUniqueID() failed in ISetupManager::LoadPersistantComponentData(): component name = {D6F52195-649D-4FAD-B43D-F4618503CFB2}\{EC4C6AFB-8B58-47AB-9CF0-6B18DD37872C}, action id = 2 [03/25/08,16:06:52] Microsoft Integration: [2] ISetupComponent::SetInstallActionByUniqueID() failed in ISetupManager::LoadPersistantComponentData(): component name = {D6F52195-649D-4FAD-B43D-F4618503CFB2}\{3340494C-2141-4DF3-9041-7504795CDF9D}, action id = 2 [03/25/08,16:06:52] Microsoft Integration: [2] ISetupComponent::SetInstallActionByUniqueID() failed in ISetupManager::LoadPersistantComponentData(): component name = {D6F52195-649D-4FAD-B43D-F4618503CFB2}\{3585A6C7-38E7-4B4E-93A6-851C83F51B49}, action id = 2 [03/25/08,16:06:52] Microsoft Integration: [2] ISetupComponent::SetInstallActionByUniqueID() failed in ISetupManager::LoadPersistantComponentData(): component name = {D6F52195-649D-4FAD-B43D-F4618503CFB2}\{54AB0622-F0EC-4E5E-AD73-22A7606EC8E7}, action id = 2 [03/25/08,16:06:52] Microsoft Integration: [2] ISetupComponent::SetInstallActionByUniqueID() failed in ISetupManager::LoadPersistantComponentData(): component name = {D6F52195-649D-4FAD-B43D-F4618503CFB2}\{0842297C-8833-450E-9385-08F822AC872E}, action id = 2 [03/25/08,16:06:52] Microsoft Integration: [2] ISetupComponent::SetInstallActionByUniqueID() failed in ISetupManager::LoadPersistantComponentData(): component name = {D6F52195-649D-4FAD-B43D-F4618503CFB2}\{0842297C-8833-450E-9385-08F822AC872E}\{F0BC581E-B500-4BFD-9B70-6A675CFCEA92}, action id = 2 [03/25/08,16:06:52] Microsoft Integration: [2] ISetupComponent::SetInstallActionByUniqueID() failed in ISetupManager::LoadPersistantComponentData(): component name = {D6F52195-649D-4FAD-B43D-F4618503CFB2}\{0842297C-8833-450E-9385-08F822AC872E}\{3E8E2F1F-C54D-4C0D-9516-1843DC5D9CB3}, action id = 2 [03/25/08,16:06:52] setup.exe: [2] ISetupManager::AddGlobalCustomProperty failed in ISetupManager::LoadPersistantData() ({df8ff64a-1967-4871-9e32-ca2f819bab81}) [03/25/08,16:06:53] setup.exe: [2] ISetupManager::AddGlobalCustomProperty failed in ISetupManager::LoadPersistantData() ({c248d3e3-632d-4435-888a-83035c144737}) Tag: Sharepoint Extranet disabled RWW Tag: 387356
  - 6
    - Windows SBS 2003 & Windows Vista We are currently running Windows Small Business Server 2003 and have about 10 client computers connected to the server. Two of the clients were installed about 6 months ago and are running "Windows Vista Business", the rest of the computers are still on XP. About 1 month ago i tried to install a new client running vista to the server and had trouble with it... Due to lack of information on the internet i gave up on the problem and installed XP (which connects up perfectly). In the past few days i have again been trying to add yet another new "vista" client to the server. And i keep receiving the same error. "The Server that is running Windows SBS 2003 cannot be found. Verify the following before you continue:.......". The message says to ensure the server is the DNS.... which it is and then it says something about clearing the proxy information in Internet Explorer...which i have also done........ It really has me stumped!! I have even tonight wiped this client again and installed XP on the machine and it connects perfectly without a hitch...... I am happy to use XP but it is buggin me that i cant use Vista considering we have purchased it. Does anyone have any ideas???? Tag: Sharepoint Extranet disabled RWW Tag: 387323
  - 7
    - My Docs folder and Synchronization Running SBS 2003 Premium SP2. ================ I'm finally getting it through my (sometimes) thick head that Synchronization needs to be shut off on the clients. I will need to explain WHY to the staff, but I'm stumped. How does the client My Docs folder sync with their \\<servername>\Users\<username> folder if synchronization is turned off? TIA, Mike Webb Tag: Sharepoint Extranet disabled RWW Tag: 387319
  - 8
    - internet and hyperlink restrictions in GPO Hi i have allready posted this issue but lost it somewhere. Situation: I have configured a sbs 2003 premium R2 with SP1 server Created different OUâ??s Every OU has itâ??s own policy They all inherit from the main domain Policy. Policylevels are high I work with redirected desktops.and documents Rightclick, Editing, Write ,Slide , Control panel, taskmanager, CTRL-ALT-DEL , etcâ?¦ are disabled A lot of functions and settings that can be changed as a restricted user are disabled Some users have access to office word or outlook Other not Some users may access the internet Other not Some user may send/receive emails ( 25 and 110) and at the same time not accessing the internet ( 80) Here are my questions How can I configure at GPO that some OU may access the internet and other OUâ?? s not and still be able to send/receive email with pop and smtp Do I have to configure a non-existing proxy ? How can I prevent some OU to create or execute Hyperlinks in Word or outlook? Because when I tried to create a link like â?? C:\â?? in MSWord with a restricted useaccount and ctrl-click it , I can access windows explorer, policy does not allow me to change or delete, but I would like to prevent the opening of windows explorer. Possible or not ? I hope this little story is understandable. Sorry for my poor grammar. Thank you in advance Tag: Sharepoint Extranet disabled RWW Tag: 387318
  - 9
    - WSS 2.0 -> WSS 3.0 installation Problem Running this on SBS 2003 Premium SP2. ================ I am trying to install WSS 3.0 over WSS 2.0 as an upgrade, following the instructions for SBS, but it fails while trying to create the configuration database. The error is: 03/25/2008 13:49:35 8 INF debugMessage for task configdb is An exception of type System.Data.SqlClient.SqlException was thrown. Additional exception information: Could not find stored procedure 'dbo.proc_getObjectsByClass'. System.Data.SqlClient.SqlException: Could not find stored procedure 'dbo.proc_getObjectsByClass'. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlDataReader.ConsumeMetaData() at System.Data.SqlClient.SqlDataReader.get_MetaData() at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior) at Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand command, CommandBehavior behavior) at Microsoft.SharePoint.Administration.SPConfigurationDatabase.FetchId(QualifiedObjectName qName) at Microsoft.SharePoint.Administration.SPConfigurationDatabase.GetObject(String name, Guid parentId, Type type) at Microsoft.SharePoint.Administration.SPConfigurationDatabase.Initialize(SqlConnectionStringBuilder connectionString, Boolean enableCaching) at Microsoft.SharePoint.Administration.SPConfigurationDatabase.RegisterDefaultDatabaseServices SqlConnectionStringBuilder connectionString) at Microsoft.SharePoint.Administration.SPConfigurationDatabase.Provision(SqlConnectionStringBuilder connectionString) at Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuilder configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword) at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb() at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run() at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask() ========= Nothing of note in the Application log; any ideas on how to correct this? Mike Webb Platte River Whooping Crane Maintenance Trust, Inc. a conservation non-profit Tag: Sharepoint Extranet disabled RWW Tag: 387316
  - 10
    - Hard Disk Partition Recommendations My system arrived from the manufactuer yesterday and they lumped all the hard disks into one C: drive. I am going to have to repartion it and reinstall the OS myself. Their tech support suggested partioning it to C: = 100 GB for the OS and the remainder for D: I would rather have at least 3 partitions; OS, Software Applications, Data, or more which is why I am turning to the experienced users out there for input. The system consists of 4 500GB hard disks with a Raid 5 controller. What are your thoughts on how to divide up the space? Tag: Sharepoint Extranet disabled RWW Tag: 387308
  - 11
    - Receiving thousands of System Administrator messages in e-mail We run SBS 2003 R2 with 5 clients and in the last 24 hours, one of our e-mail clients in being swamped with thousands (47,000++ in the last 24 hours) of messages purporting to come from the System Administrator. The messages read; "Your message did not reach some or all of the intended recipients. Subject: Mondo BancoPosta ti premia con un bonus di fedelta di 250Ð? ! Sent: 25/03/2008 10:21 The following recipient(s) could not be reached: tielgari@tim.it on 26/03/2008 10:32 There was a SMTP communication problem with the recipient's email server. Please contact your system administrator. <jbassociates.uk.com #5.5.0 smtp;550 Invalid recipient: <tielgari@tim.it>> " My question is how do we stop this mass e-mail attack? And how do we prevent a reoccurance? Tag: Sharepoint Extranet disabled RWW Tag: 387304
  - 12
    - Event ID 529 How can I trace this to a source address? Logon Failure: Reason: Unknown user name or bad password User Name: admin Domain: Logon Type: 3 Logon Process: Advapi Authentication Package: MICROSOFT_AUTHENTICATION_PACKAGE_V1_0 Workstation Name: xxxxxxxx Caller User Name: xxxxxxxx Caller Domain: xxxxxxxxxxxx Caller Logon ID: (0x0,0x3E7) Caller Process ID: 324 Transited Services: - Source Network Address: - Source Port: - Tag: Sharepoint Extranet disabled RWW Tag: 387303
  - 13
    - RWW and Web Site Hi all, As I have stated before I use GoDaddy to host my web site (www.damexpress.net). When I use RWW I use my static IP address (provided by Verizon) to connect to my workplace server and computers. All of my mail is hosted at GoDaddy. And the users use GoDaddy's web based interface to send and receive mail. What I want to do is: (I know I have been over this before in this NG but sometimes things don't sink in!!!) 1. I think that I may want to use Outlook 2003 but I don't see that in SBS2003 programs. I am not sure that using Outlook has any advantages over the current web base e-mail??? 2. If there are overwhelming advantages to using Outlook then are there any step by step guides to follow to make this happen. I know that it involves changing MX records and an A record but all of this is may not be necessary if I am not going to change the way users get mail. This NG has been absolutely great. I have been helped with: Roaming Profiles (works great now) Folder Redirection (works great but found out I really don't need it because all users have to access the same files, so I just shared them on a separate drive. RWW (works great but I can only access the computers in the network, nothing else works because RWW says I don't have things installed or configured but more on that to come :) Still haven't got VPN to work and I would like to get it to work even if I don't use it. I can download the connection manager from RWW but VPN just won't work. Thanks to all who have helped. D -- For The Best Web Hosting Money Can Buy Go To: http://www.serverpoint.com/1028.html Tag: Sharepoint Extranet disabled RWW Tag: 387302
  - 14
    - Best practice for having 2 diff domain names emailing to 1 server? Hi Guys, Maybe a simple question but I wanted to check b4 I actioned anything as I've never had the need to do this before.. I have 2 domain names - customer.uk.com and customer.biz and I want them to both go to the same SBS server. I was going to point both MX records at the server and then create distribution groups and add SMTP email addresses to each specific user. Is this the best way of going about it? Thanks! Tag: Sharepoint Extranet disabled RWW Tag: 387300
  - 15
    - Event Viewer Errors? I am getting this error in the Event Viewer every 5 minutes 24/7. I have look all over and cannot find what the heck it means and how to stop it. Connection to database failed. Reason=SQL Server does not exist or access denied.. Connection string: Data Source=NEPTUNE\WSUS;Initial Catalog=SUSDB;Connection Timeout=60;Application Name=WSUS SQL Connection;Trusted_Connection=Yes;Pooling='true'; Max Pool Size = 100 I am also getting this error every 15 minutes 24/7. Any ideas on how to fix? The Update Services service terminated unexpectedly. It has done this 421 time(s). D -- For The Best Web Hosting Money Can Buy Go To: http://www.serverpoint.com/1028.html Tag: Sharepoint Extranet disabled RWW Tag: 387297
  - 16
    - HDD failure! Mirror boots ok except WSUS - Re-installation is fail Hi! Please help, I can't find a solution... Hereâ??s the situation: - System with 2 HDDs (HDD0 & HDD1). - SBS 2003 installed to the first partition of HDD0. - WSUS(2) database installed to the second partition of HDD0. - Using soft-raid mirroring only to the first partition of HDD0 (being mirrored to the first partition of the HDD1). Thus, WSUS wasnâ??t being mirrored anywhere! Due to continuously environmental power problems (about 10 days long), the SBS 2003 disk failed! The BIOS doesnâ??t even detect the HDD0. I switched to the soft-raid mirrored HDD1 and the system (thank God!) works fine except (of course) of the WSUS service. The WSUS database folder is gone for ever! After the shock I bought a new hard disk and I created a soft-raid mirrored HDD(1), mirroring this time both c: and d: partitions of HDD(0). The old mirror (HDD(1)) became the HDD(0) and the new installed disk (HDD(1)) is now mirroring the HDD(0). I tried to uninstall WSUS 2 and re-install it, but the installation is failing (I tried 3 times). Here is the WSUS 2 setup log file contents: 2008-03-24 16:31:24 Success MWUSSetup WSUS Server Setup Started. 2008-03-24 16:31:24 Success MWUSSetup Parsing command line arguments 2008-03-24 16:31:24 Success MWUSSetup WSUS Setup: Performing Install 2008-03-24 16:31:25 Success MWUSSetup Validating pre-requisites 2008-03-24 16:31:25 Success MWUSSetup .Net framework SP1 is detected on this machine 2008-03-24 16:31:25 Success MWUSSetup Creating WSUS registry key 2008-03-24 16:31:25 Success MWUSSetup Initializing installation details 2008-03-24 16:31:25 Success MWUSSetup Initializing wizard 2008-03-24 16:31:31 Error MWUSSetup GetProcAddress failed in SKU Check (Error 0x8007007F: The specified procedure could not be found.) 2008-03-24 16:31:31 Error MWUSSetup GetSqlFlavor failed (Error 0x8007007F: The specified procedure could not be found.) 2008-03-24 16:31:31 Error MWUSSetup Failed to determine Sql type of instance. Assuming it to be SQL... (Error 0x8007007F: The specified procedure could not be found.) 2008-03-24 16:32:02 Success MWUSSetup Installing ASP.Net 2008-03-24 16:32:26 Success MWUSSetup Asp.Net is installed successfully 2008-03-24 16:32:26 Success MWUSSetup ASP.Net is installed successfully 2008-03-24 16:32:27 Success MWUSSetup MSXML2 is already installed on this machine 2008-03-24 16:32:27 Success MWUSSetup Installing WMSDE 2008-03-24 16:32:27 Success MWUSSetup WMSDE with the product code {83BC1BC2-FCC4-4CED-8A3C-EB7CDFB3CF6A} is already installed 2008-03-24 16:32:27 Success MWUSSetup WMSDE is installed successfully 2008-03-24 16:32:27 Success MWUSSetup Initializing MWUS installation 2008-03-24 16:32:27 Success MWUSSetup Installing PSFSIP 2008-03-24 16:32:27 Success MWUSSetup PSFSIP Installed Successfully 2008-03-24 16:32:27 Success MWUSSetup Copying installation settings to the registry 2008-03-24 16:32:27 Success MWUSSetup Installing MSUS... 2008-03-24 16:32:27 Success MWUSSetup Installing MWUS With Command Line SETUP_EXE=1 WUS_INSTALLMODE="128" AUTHENTICATED_USERS="NT AUTHORITY\Authenticated Users" CONTENT_LOCAL="1" SQLINSTANCE_NAME="%computername%\WSUS" CUSTOMACTION_LOG="C:\Program Files\Update Services\LogFiles\WSUSCa_080324_1631.log" REPLICA_PARENT 2008-03-24 16:32:29 Success CustomActions.Dll .Net framework path: C:\WINDOWS\Microsoft.Net\Framework\v1.1.4322 2008-03-24 16:32:40 Success CustomActions.Dll Creating WSUS Administrators user group 2008-03-24 16:32:40 Success CustomActions.Dll WSUS Administrators user group already exists 2008-03-24 16:32:40 Success CustomActions.Dll Successfully created WSUS Administrators user group 2008-03-24 16:34:45 Error CustomActions.Dll SQL command failed to set sa password (Error 0x80004005: Unspecified error) 2008-03-24 16:34:45 Error CustomActions.Dll Failed to set sa password (Error 0x80004005: Unspecified error) 2008-03-24 16:34:45 Error CustomActions.Dll Failed to set sa password (Error 0x80004005: Unspecified error) 2008-03-24 16:34:45 Error CustomActions.Dll InstallDatabase failed (Error 0x80004005: Unspecified error) 2008-03-24 16:34:45 Error CustomActions.Dll Failed to setup the database (Error 0x80004005: Unspecified error) 2008-03-24 16:34:45 Error CustomActions.Dll Failed to configure the database (Error 0x80004005: Unspecified error) 2008-03-24 16:34:56 Error CustomActions.Dll SQL command is returning error (Error 0x80004005: Unspecified error) 2008-03-24 16:34:56 Error CustomActions.Dll ExecuteSQLCommand returning error (Error 0x80004005: Unspecified error) 2008-03-24 16:34:56 Error CustomActions.Dll Failed to execute SQL script (Error 0x80004005: Unspecified error) 2008-03-24 16:34:56 Error CustomActions.Dll BuildAndExecuteSQLQuery failed (Error 0x80004005: Unspecified error) 2008-03-24 16:34:56 Error CustomActions.Dll Failed to create database schema (Error 0x80004005: Unspecified error) 2008-03-24 16:34:56 Error CustomActions.Dll ExecuteScriptFromDLL failed (Error 0x80004005: Unspecified error) 2008-03-24 16:34:56 Error CustomActions.Dll Failed to execute database deletion scripts. SUSDB may not have been removed (Error 0x80004005: Unspecified error) 2008-03-24 16:35:06 Error CustomActions.Dll SQL command is returning error (Error 0x80004005: Unspecified error) 2008-03-24 16:35:06 Error CustomActions.Dll ExecuteSQLCommand returning error (Error 0x80004005: Unspecified error) 2008-03-24 16:35:06 Error CustomActions.Dll Failed to execute SQL script (Error 0x80004005: Unspecified error) 2008-03-24 16:35:06 Error CustomActions.Dll BuildAndExecuteSQLQuery failed (Error 0x80004005: Unspecified error) 2008-03-24 16:35:06 Error CustomActions.Dll Failed to execute remove account SQL Script (Error 0x80004005: Unspecified error) 2008-03-24 16:35:06 Error CustomActions.Dll RemoveLoginPermissionToAccount returning error (Error 0x80004005: Unspecified error) 2008-03-24 16:35:06 Error CustomActions.Dll Failed to remove account ERGODESIGN\WSUS Administrators (Error 0x80004005: Unspecified error) 2008-03-24 16:35:39 Error MWUSSetup MWUS Installation Failed (Error 0x00000643: Fatal error during installation.) 2008-03-24 16:35:40 Error MWUSSetup InstallMSUS failed (Error 0x80070643: Fatal error during installation.) 2008-03-24 16:35:40 Error MWUSSetup MWUS installation failed (Error 0x80070643: Fatal error during installation.) 2008-03-24 16:35:40 Error MWUSSetup PerformInstall failed (Error 0x80070643: Fatal error during installation.) 2008-03-24 16:35:40 Success MWUSSetup Rolling back Installation 2008-03-24 16:35:40 Success MWUSSetup WSUS Server installation failed. You can look at C:\Program Files\Update Services\LogFiles\WSUSSetup_080324_1631.log file to determine the cause of the failure 2008-03-24 16:41:49 Error MWUSSetup WMSDE Uninstall Failed (Error 0x80070643: Fatal error during installation.) 2008-03-24 16:41:49 Error MWUSSetup RemoveMWSDE failed (Error 0x80070643: Fatal error during installation.) 2008-03-24 16:41:49 Error MWUSSetup Rollback of WMSDE failed (Error 0x80070643: Fatal error during installation.) 2008-03-24 16:41:49 Error MWUSSetup RollbackInstall failed (Error 0x80070643: Fatal error during installation.) 2008-03-24 16:41:49 Success MWUSSetup StringObtained: Microsoft Windows Server Update Services could not create the database. For more information, see the Setup log "C:\Program Files\Update Services\LogFiles\WSUSSetup_080324_1631.log". 2008-03-24 16:43:19 Error MWUSSetup WSUS Setup: Performing Install Failed. (Error 0x80070643: Fatal error during installation.) 2008-03-24 16:43:19 Error MWUSSetup WSUS Setup Failed. (Error 0x80070643: Fatal error during installation.) Since Iâ??m new to SBS, can you please advice me what should I do to install WSUS 2 again? Thanks in advance, John Tag: Sharepoint Extranet disabled RWW Tag: 387294
  - 17
    - Server Logon Prompt Freezes Hi All, Thanks in advance for any help. Our SBS 2003 server has been having problems lately where when somebody goes to logon to the console sometimes one of the following things will occur: 1. When pressing CTRL+ALT+DEL, the console freezes and screen just becomes blank with wallpaper at back (No logon prompt shown) 2. When pressing CTRL+ALT+DEL and then logging on (entering password etc) the console then freezes after logon prompt has dissapeared and becomes blank with wallpaper at back Sometimes we may lose network connectivity, otherwise other times console is frozen, though remote logon's are allowed and networks are still up. Please help! The only way for us to get around this is to force a reboot on the server! Thanks again. Tag: Sharepoint Extranet disabled RWW Tag: 387293
  - 18
    - Software RAID Recovery Just experienced a hard drive failure that has Mirrored Drives. The problem is I think when the one drive went bad it corrupted the other drive. So know I have a broken HD, a good HD that shows data when I install it in another computer but it won't boot the server. They are SCSI drives. Tried the repair install but SBS doesn't see this disk. Does anyone know if I can just Ghost this disk that shows data and the OS on it to another drive in another PC? I was close to calling OnTrack for data recovery just not sure how much they charge and how good the results are. If anyone has any feedback I would be interested in knowing. Thanks Tag: Sharepoint Extranet disabled RWW Tag: 387280
  - 19
    - Blackberry and SBS setup Hi, My boss got a Blackberry while everyone else has WMP5, gotta be different! Anyway, if my boss leaves his desktop on all the time with Outlook opens, does it mean with the BB desktop software, it can synchorize the Blackberry over the data network just like if I had installed BSE server? I can do forwarding but I'm sure he won't like that. I don't have any exposures with BB so I'm not sure exactly how to set it up properly. Any pointers would be greatly appreciated. Tag: Sharepoint Extranet disabled RWW Tag: 387266
  - 20
    - Another security question/issue. Ok; I get daily hits to the disabled admin account. Event log tells me they are denied access. First, I was told the reason the attempts are higher than my lockout policy is because policies don't apply to admin account - correct? How can I find out who is making these attempts and how I can deny that individual access? The most annoying instance happens very close to the same time every morning at about 4:00 a.m. The logs don't give an address of the user trying the attempted logins. What are my options? Second, if the account is obviously disabled, why would a hacker keep attempting to access it? It's not going to work...right? Third, I've been noticing fail authentication attempts with the user name MDaemon. Is that an actual service that I need to deal with, or is it an attempt at unauthorized access? Finally....if I've closed all ports except 25 TO the SBS box from my external firewall appliance, why am I still seeing failed authentication attempts on a daily basis? Is it possible to attempt a login through port 25 which is designated for exchange? Tag: Sharepoint Extranet disabled RWW Tag: 387262
  - 21
    - Free disk space on SBS 2003 C-drive Hi, I remember I read at thread some time ago about freeing space on the C-drive by moving files and folders, but unfortunately I can't find that thread again. Can anyone help me locating the thread - or point to another place to find the information. Regards Chris Tag: Sharepoint Extranet disabled RWW Tag: 387250
  - 22
    - Error (407) Proxy Authentication Required - Kindly Help! Hi Peeps! I am having a heck of a time getting the program "Business Plan Pro" to update from a client workstation connected to a SBS 2003 Premium R2 server. Whenever I hit update, it gives me the following error: Error (407) Proxy Authentication Required When I check ISA, it reports the following error: Denied Connection SERVER 3/25/2008 6:51:07 PM Log type: Firewall service Status: The policy rules do not allow the user request. Rule: Default rule Source: External ( 192.168.1.24:137) Destination: Local Host ( 192.168.1.255:137) Protocol: NetBios Name Service User: Additional information Number of bytes sent: 0 Number of bytes received: 0 Processing time: 0ms Original Client IP: 192.168.1.24 Client agent: Can anyone suggest a fix as I am quite confused on this one. Thanks! Ringo Tag: Sharepoint Extranet disabled RWW Tag: 387249
  - 23
    - Setting up a shared calendar in Public Folders - is it possible in SBS? Hello all, Can anyone tell me whether it is possible on SBS 2003 R2 to have a shared calendar in a Public Folder in Outlook? I'm supporting a company who use a couple of default email addresses such as info@ and mail@ to go into a public folder which they can all access, and they would like to set up a calendar along similar lines. Any suggestions? Ruth Tag: Sharepoint Extranet disabled RWW Tag: 387241
  - 24
    - As Admin, I can't view my users Roaming Profiles. What add'l I set up security for Roaming profiles from the "blue book, admin companion", but I've noticed that when a user logs in, the roaming profile directory is created for that user (on the server) but I can't access it from the admin account. What add'l security do I have to add to allow me to access these dirs? I tried Admin with subdir and file permissions, but it would appear the the user account trumps it and keeps me out. Thanks, Roveer Tag: Sharepoint Extranet disabled RWW Tag: 387237
  - 25
    - SBS 2003 and Outlook rpc over http issue Hi, First dont reply if you dont have an answer that kinda wastes my time out here and makes me repost. SBS 2003 that has been running for 3 years with minimal issues. I have setup SBS and configured exchange on this machine years ago. Recently I tried to configure an Outlook 2003 client on Winxp with all updates to connect via RPC over HTTP with no luck. I have about 20 of these SBS machines at other locations and have never had an issue getting RPC over HTTP to work. I re-ran the email connection wizard with no luck. Checked all ports on the firewall and I have pop, smtp, ssl, vpn, sharepoint and terminal server open and are forwarding to the server. I can initiate a session via HTTPS only which works fine. However I can not get RPC to work. I have tried this on several machines and it is most definitely something that is screwed up on the server. I know for a fact that at one point this was working. I did install CRM about 2 years ago but the customer didnt want to use this after a while so I uninstalled this. I am thinking that the CRM did something to my box but I cannot seem to figure this out. I even tried my own laptop which I use to test other customers machines with no luck. I am also unable to get any windows mobile devices to connect either. It may be an issue with my certificate, authentication is setup correctly. I checked the RPC permissions in IIS and it is setup to use basic authentication for RPC requests. Any ideas? Both the server 2003 and the XP pro clients are fully patched, office 2003 is up to SP3. I have also tried to run from a Vista client with office 2007 and it still is failing. The windows mobile device is version 5 with activesynch. Any help is appreciated greatly... Ted Tag: Sharepoint Extranet disabled RWW Tag: 387233
- Next
  - 1
    - companyweb not working in RWW Hi, I've been trying to get the companyweb link within RWW to work. I've updated the companyweb using sharepoint 2.0. Works great when I'm in the domain. When I connect using RWW, I get Internet Explorer cannot display the webpage. I'm not running the RWW in sharepoint because when I do upgrade to it, I can no longer log onto RWW. Please if you have any more ideas, send them over my way. Thanks, Bryan Tag: Sharepoint Extranet disabled RWW Tag: 387230
  - 2
    - WSUS 3.0 SP1 - can't connec to server Running SBS 2003 Premium SP2. ============== Recently rebuilt server and re-installed WSUS 3.0 SP1, but when I try to connect to the server, I get an error stating I don't have the proper permission, that I must be a member of the WSUS Administrators or WSUS Reporters groups. I checked and I am. I checked the Application log and saw several errors that I worked through. The registry key is set to port 8530, and all websites in IIS Manager are set to ASP.NET 2.0.x (although the ASP.NET tabs for the Sharepoint and WSUS websites have the version greyed out and the dates are missing. Don't know the significance). The errors in Application log are: 12042 - SimpleAuth Web Service for source: Windows Server Update Services 12052 - DSS Authentication Web Service for source: Windows Server Update Services I checked MS and Eventid.net and wasn't able to solve this. Any ideas out there? Mike Webb Platte River Whooping Crane Maintenance Trust, Inc. a conservation non-profit Tag: Sharepoint Extranet disabled RWW Tag: 387229
  - 3
    - Cannot edit, create, or save files in any place other than my I have a pc that i just got from dell. The problem is that when I log into the server 2003 server I am unable to save files anywhere other than "my documents". If i log in as local admin i can save or change files anywhere on the c: drive. The profile that will be using this pc is currently allowed to create, edit, and save files anywhere on the pc and so are the other 30 computers in the network. I verified this by creating a txt document on the root c directory successfully while logged in as that profile. I configured the server and the security permissions which do not disallow anything regarding where files can be created or modified. None of the other pc's have this problem. We use an erp software that needs access to sme files in its install directory on the c drive but obviously am not allowed to make changes here so I am unable to run our software. Tag: Sharepoint Extranet disabled RWW Tag: 387224
  - 4
    - Trend Micro CSM for SMB "EUQ Spam folder" vs OE 2003 Junk Mail How do I integrate these so that my users don't have to check the Junk Mail folder and the TM Spam folder? This seems a bit odd? I've got IMF set up to toss stuff in the Junk folder at a level 6 or better, and Trend Micro set to Medium for it's Spam filtering. Tag: Sharepoint Extranet disabled RWW Tag: 387220
  - 5
    - Exchange server setting Is there a setting on the Exchange server that allows a person so set a server-side rule to automatically send to an external address? For example: John Smith is in the GAL. Since John travels all the time, he wants anyone (internal or external) to be able to send to his account in the GAL and have it -- via a set rule -- send to his AOL email account. Tag: Sharepoint Extranet disabled RWW Tag: 387214
  - 6
    - VPN Hi I am using CISCO VPN to remotly connecting to my PC at work. I am some time connecting from my Home and some times from my uncle's home. Does my employer can see any way that where I am connection from? ( from my home Or from my aunt's home)? Thanks Tag: Sharepoint Extranet disabled RWW Tag: 387211
  - 7
    - Can I demote a SMS 2k Server as a member server and add to a windows Can I demote a SMS 2k Server as a member server and add to a windows 2003 R2 domain after I migrate the AD from the SBS 2000 on to the new Windows 2003 R2 domain controler? Tag: Sharepoint Extranet disabled RWW Tag: 387208
  - 8
    - Installing Trend Micro CSM for SMB Hello folks, Lanwench had suggested I check this product out a while back and I am finally getting around to it. I've got the program loaded on the server and deployed to 4 machines for testing purposes. However it does not seem that the server has any real time virus protection on it? I do not see an icon in the task bar like I do on the client machines. Am I missing something here or is the server automatically protected? Tag: Sharepoint Extranet disabled RWW Tag: 387199
  - 9
    - SBS 2003 and Outlook RPC over HTTP issues Hi, SBS 2003 that has been running for 3 years with minimal issues. I have setup SBS and configured exchange on this machine years ago. Recently I tried to configure an Outlook 2003 client on Winxp with all updates to connect via RPC over HTTP with no luck. I have about 20 of these SBS machines at other locations and have never had an issue getting RPC over HTTP to work. I re-ran the email connection wizard with no luck. Checked all ports on the firewall and 80 & 443 are forwarding to the server. I can initiate a session via HTTP only which works fine. However I can not get RPC to work. I have tried this on several machines and it is most definitely something that is screwed up on the server. I know for a fact that at one point this was working. I did install CRM about 2 years ago but the customer didnt want to use this after a while so I uninstalled this. I am thinking that the CRM did something to my box but I cannot seem to figure this out. I even tried my own laptop which I use to test other customers machines with no luck. I am also unable to get any windows mobile devices to connect either. It may be an issue with my certificate, authentication is setup correctly. I checked the RPC permissions in IIS and it is setup to use basic authentication for RPC requests. Any ideas? Both the server 2003 and the XP pro clients are fully patched, office 2003 is up to SP3. I have also tried to run from a Vista client with office 2007 and it still is failing. The windows mobile device is version 5 with activesynch. Any help is appreciated greatly... Ted Tag: Sharepoint Extranet disabled RWW Tag: 387194
  - 10
    - Verifying NTbackup actually has backed up the mail store Last week we had a situation where exchange got slammed with 15940 queues, which I have yet had a reply on as to why. It made me wonder if the mail store is actually getting backed up, so how can I check without attempting to do a restore? I have a second backup going that runs incrementals during the week due to the full backup done via the wizard taking 14 hours to complete. I start it at 9 PM now on a Friday so it doesnt impact the server. When I look at the backup file in the restore part of ntbackup, I see the mail store folders, but they are empty, and I havent found a way to look at the actual backup files the wizard makes. Tag: Sharepoint Extranet disabled RWW Tag: 387189
  - 11
    - DgiVecp Service - What Is This? Please Help. Hi, Each time the server (running Windows Small Business Server 2003) is restarted, I see this error: "One or more services failed to start." In the System Event Log, I regularly see the following error: "The DgiVecp service failed to start due to the following error: The system cannot find the device specified." This is Event ID 7000 and the source is Service Control Manager. On doing a search for DgiVecp, I find it in the following three locations: C:\Windows\system32\drivers\dgivecp.sys C:\Windows\Samsung\CLP-510\Data\dgivecp.sys C:\Windows\Samsung\CLP-510\GDI\Data\dgivecp.sys I have looked at Administrative Tools --> Services but the service in question is not listed there at all which in itself is confusing. I have looked in the registry in (HKEY_LOCAL_MACHINE\SYSTEM \CURRENTCONTROLSET\SERVICES) and 'Start' is already set to 0x2 which I believe is 'Automatic' start up. So...it looks like it has to do with my Samsung printer (which is elsewhere on the network and not directly connected) but what on earth can I do to resolve this? I have no idea what's going on. Any advice / suggestions much appreciated. I can provide more information if you need it. If I'm posting in the wrong place, please could someone point me in the right direction? Thanks. Tag: Sharepoint Extranet disabled RWW Tag: 387172
  - 12
    - Egress SMTP filtering SBS2003 Standard Ed. w/ Exchange SP2, Windows SP2 Our IP is getting on a couple of block lists so I'd like to nail down SMTP traffic to the SBS server only. I'm running a 2 NIC configuration so fitlering at the router doesn't work. How can I configure SBS to only allow SMTP traffic from the SBS itself and not the internal LAN? -Scott Tag: Sharepoint Extranet disabled RWW Tag: 387161
  - 13
    - SBS Backup failed (Event ID: 5634) I have been running a â??defaultâ?? SBS backup for a couple of years (properly more) without any significant problems. For the last two weeks I get the same very un-descriptive error (attached at the bottom of this message). Backup is running on C: (system disk) and D: (data disk). Backup of C: is completed okay, but ntbackup fails to backup D: because it is not a valid drive. Event log: 8001 and 8018 from NTBackup (and of course 5633 and 5634 from SmallBusinessServer) which tells me very little. Donâ??t know if this have any significant, but I have configured the Public Folder Store on the D: disk (Default it is on the system disk) No major changes have been made to this setup. The backup is writing to a NAS device. I have been able to restore single files/directories from the backup sets. But not system restore. Any ideas or suggestions would be greatly appreciated. Regards, Lars. 25-03-2008 01:00 ------------------------------- Date: 25-03-2008 Time: 01:00 User: SYSTEM ------------------------------- Backup Runner started. Launching NTBackup: ntbackup.exe backup "@C:\Program Files\Microsoft Windows Small Business Server\Backup\Small Business Backup Script.bks" /d "SBS Backup created on 25-03-2008 at 01:00" /v:yes /r:no /rs:no /hc:off /m normal /j "Small Business Server Backup Job" /l:s /f "\\Freenas\Backup1\asmaster\Backup Files\Small Business Server Backup (04).bkf" /UM NTBACKUP LOG FILE: C:\Documents and Settings\SBS Backup User\Local Settings\Application Data\Microsoft\Windows NT\NTBackup\data\backup06.log =====================<BEGIN NTBACKUP LOG FILE>===================== Backup Status Operation: Backup Active backup destination: File Media name: "Small Business Server Backup (04).bkf created 25-03-2008 at 01:00" Volume shadow copy creation: Attempt 1. Backup (via shadow copy) of "C: SYSTEM" Backup set #1 on media #1 Backup description: "SBS Backup created on 25-03-2008 at 01:00" Media name: "Small Business Server Backup (04).bkf created 25-03-2008 at 01:00" Backup Type: Normal Backup started on 25-03-2008 at 01:07. Backup completed on 25-03-2008 at 02:55. Directories: 8039 Files: 70691 Bytes: 20.889.025.928 Time: 1 hour, 48 minutes, and 54 seconds Backup (via shadow copy) of "D: DATA" Backup set #2 on media #1 Backup description: "SBS Backup created on 25-03-2008 at 01:00" Media name: "Small Business Server Backup (04).bkf created 25-03-2008 at 01:00" Backup Type: Normal Backup started on 25-03-2008 at 02:55. Error: The device reported an error on a request to write data to media. Error reported: Invalid command. There may be a hardware or media problem. Please check the system event log for relevant failures. The operation was ended. Backup completed on 25-03-2008 at 04:17. Directories: 1251 Files: 8053 Bytes: 25.627.938.904 Time: 1 hour, 21 minutes, and 21 seconds Error: D: is not a valid drive, or you do not have access. ---------------------- The operation did not successfully complete. ---------------------- =======================<END NTBACKUP LOG FILE>===================== NTBackup finished the backup with errors. For more information about failed backups, see the article on troubleshooting your backup at the following Web page: http://go.microsoft.com/fwlink/?LinkId=18414 Backup ended at 25. marts 2008 04:17 Backup Runner finished. Tag: Sharepoint Extranet disabled RWW Tag: 387158
  - 14
    - Problems Sending Emails to Yahoo Email Accounts Hello All, Users are having trouble sending emails to Yahoo email accounts. Exchange on the SBS 2003 Standard R2 currently only has an SMTP connector via Verizon for outbound email. The "Route Emails With DNS" default SMTP was removed bas it was noticed to be unable to deliver emails observed in the Exchange queues. Any idea what could be the issue here? Thanx. Tag: Sharepoint Extranet disabled RWW Tag: 387156
  - 15
    - moving Exchange 2003 to a different server We are looking to move Exchange off the SBS 2003 server so we can colocate it off site to improve access reliability. Where it is now if the T1 fails, all email stops, and we have several off site users. The Server will be on a private network as well as all users, and be behind a firewall. There wont be any firewalls between the new server and the SBS server, but will be connecting over a T1 line instead. I would prefer not to have the SBS server in the colo due to accessability, I need to be able to physically access it as needed for backing up and other reasons, plus we transfer a lot of files to and from it that I dont want going over a T1. Is there anything special I need to do in order to perform this? I would prefer 2007 since I have a few deployed now for other clients and have become quite aquianted with it, but finding that it may be hard if not impossible to add to the existing domain. Currently we have FRS running between the SBS server and a Win2K server, which is another reason I dont want to move the server. IT aint broke and I sure dont want to fix it. Tag: Sharepoint Extranet disabled RWW Tag: 387150
  - 16
    - Remote Web Workplace Vs VPN While answering my questions about domain names is a previous thread a few people suggested Remote Web Workplace as a better alternative to using VPN. The reason I am thinking VPN is because I am used to using it. I would establish the VPN connection then map to the drive\folder on the server and then use the files I needed that way. The network I am experienced using is a much larger scale than a SBS system. Will RWW work for this situation though. Quickbooks has a multi-user mode where the main company file is located on central computer and multiple users can access the same file simultanously and input data. I already have this setup and working on the existing network by having the file in a shared folder. Tag: Sharepoint Extranet disabled RWW Tag: 387149
  - 17
    - Event ID 529 Getting a lot of errors on an SBS 2003 box. What log can I look at to trace this event to an IP address? Tag: Sharepoint Extranet disabled RWW Tag: 387146
  - 18
    - Gold Supplier offer the best service and lowest price ,accept PAYPAL Your satisfactions,Our pursuit! http://www.elecserver-yhnetstore.cn Yhnetstore Co.,LTD greets and desires of success and wishes you happy times. This is professional export company from china who carry PAYPAL payment and DROPSHIP . We greated in 2007 year ,and now we become the one of best supplier here because of we keep our credit standing . Pls visit our site if u are interest in any products below , http://www.elecserver-yhnetstore.cn Our main products : Fashion shoes: Air Jordan , Air force , Air max , Shox , Dunk , Adidas , Puma , Prada , Chanel , Gucci , Lacoste , LouisVuiton and more . Fashion Hoodies&T-Shirt&Jeans&Jacket: Gino Green Globa , Bape , BBC , Evsiu , Juicy couture , Burberry , 10 Deep , LRG , ED Hardy , Chanel , G-Star , Red monkey , lacoste , POLO, Armani ,Replay , Tommy and more. Fashion bags: LouisVuiton , Pada , Chanel , Fendi , Versace , Burberry , MIUMIU , Y-3 , Gucci ,Chloe , Guess , Juicy and more Electronic : IPOD NANO , Features: 1) All Package are original ,coming with guarantee cards 2) Main Market : U.S.A . U.K ,ITALY , EURO COUNTRY , AUSTRALIA 3) Ship Company : DHL , TNT , UPS , SODIEX , EMS 4) Payment Method : PAYPAL , WESTERN UNION ,T/T . 5) Custom : We carry the custom clear and promise items must be arrive . Thanks for your reading , pls mail us if u have any problem with the business . We hope that will make a long&great business with you in future. Your satisfactions,Our pursuit! Tag: Sharepoint Extranet disabled RWW Tag: 387143
  - 19
    - USB Printer Port not identified - Urgent Hi guys, Need some quick help here if anyone can advise me? I've just rolled out my first SBS 2003 R2 server (yay) and the client decided he needs an old Lexmark Optra e312L printer installed and shared between all the computers. I've downloaded the drivers from the Lexmark site, started installing (thought at this point, ahh this should be easy .. big mistake!). It's plugged into a USB port on the server, and switched on. The installer, however, only offers LTP and COM. Tried going through and manually adding the printer but again, no USB printer port is provided. Any ideas? Cheers Ruth Tag: Sharepoint Extranet disabled RWW Tag: 387142
  - 20
    - Undo "connectcomputer" Hi all I have a workstation running XP Pro SP2 + all updates that has been used with a Small Business Server. This is no longer the case but it still tries to synchronize with the server, even when it is running in local mode i.e. not logged on to the domain. How can I remove its connection with the server/domain? I am not really keen on reinstalling everything from the ground up on this PC. Thanks in advance Ebbe Tag: Sharepoint Extranet disabled RWW Tag: 387139
  - 21
    - NTBackup via command line not working Whats wrong with this?? ntbackup backup /f "P:\exchangebackup.bkf" /j "Exchange server backup" IS "\\MY-SERVER" /d "Exchange backup set created %date% %time%" /v:yes /r:no /rs:no 'P:' is my removeable USB drive Tag: Sharepoint Extranet disabled RWW Tag: 387136
  - 22
    - Installing Sql2005 Express on sbs2003 std Hello, I have to install Sql 2005 Express edition on a Sbs2003 std box. As sbs's default there are 2 msde instances running ( sbsmonitoring - sharepoint ), it is possible to keep these 2 istances without modifying them and add a new sql 2005 db? or i can upgrade both instandes to sql 2005 without issue to the sharepoint enviroment and monitoring features? I remember that some times ago, theres a doc. regarding this, but i cannot found anymore. Thanks in advance Tag: Sharepoint Extranet disabled RWW Tag: 387135
  - 23
    - Configure Blackberry Device with SBS Help I need a little direction here. I have a new SBS environment that I'm bringing up this week and there are 2 users who have mobile devices. The first one is Windows Mobile 6 and the other is a Blackberry device using Verizon service. I can configure the WM6 device but I have never done a Blackberry. Is there any place I can do with some detailed information on how to configure? And by chance has anyone put together a step-by-step guide for the WM6? I can do the WM6 but I've never come across a "formal" guide. Thanks! -Richard K Tag: Sharepoint Extranet disabled RWW Tag: 387130
  - 24
    - Manually joining to domain vs connectcomputer? Hi all, Is there anything really scarey waiting for me as I manually join PCs to the sbs2003r2 domain? Using connectcomputer users keep getting a popup that says they don't have permissions to install software if I use the connectcomputer option. I was just having a look into this as I'm wanting to figure out how to push new software and software updates to the client computers and references to connectcomputer kept popping up. Regards, Ari Tag: Sharepoint Extranet disabled RWW Tag: 387123
  - 25
    - Corum Bubble Large Stainless Steel Mens Watch 163-150-20-0F05FZ30R Corum Bubble Large Stainless Steel Mens Watch 163-150-20-0F05FZ30R Replica, Fake, Cheap, AAA Replica watch Corum Bubble Large Stainless Steel Mens Watch 163-150-20-0F05FZ30R Link : http://www.aaa-replica-watch.com/corum_bubble_large_163150200F05FZ30R.html Buy the cheapest Corum Bubble Large Stainless Steel Mens Watch 163-150-20-0F05FZ30R in toppest Replica . www.aaa-replica-watch.com helps you to save money! corum-bubble-large-163150200F05FZ30R , Corum Bubble Large Stainless Steel Mens Watch 163-150-20-0F05FZ30R , Replia , Cheap , Fake , imitation , Corum Watches Corum Bubble Large Stainless Steel Mens Watch 163-150-20-0F05FZ30R Information : Brand : Corum Watches (http://www.aaa-replica-watch.com/ Replica_Corum.html ) Gender : Mens Model : corum-bubble-large-163150200F05FZ30R Case Material : Stainless Steel Case Diameter : Dial Color : Orange Bezel : Stainless Steel Movement : Quartz Clasp : Orange Leather Water Resistant : 30 Meters (100 Feet) Crystal : Scratch Resistant Sapphire Our Price : $ 233.00 Stainless Steel Case. Orange Leather Strap. Orange Dial. Stainless Steel Bezel. Scratch Resistant Sapphire Crystal. Buckle Clasp. 45 mm Case Diameter. Quartz Movement. Water Resistant At 30 Meters (100 Feet). Corum Bubble Large Stainless Steel Mens Watch 163-150-20-0F05FZ30R Corum Bubble Large Stainless Steel Mens Watch 163-150-20-0F05FZ30R Replica, With the mix of finest craftsmanship and contemporary styling, not only does it reflect the time but also care you put into looking good. choose one to promote your quality and make yourself impressive among people Thank you for choosing www.aaa-replica-watch.com as your reliable dealer of quality waches including Corum Bubble Large Stainless Steel Mens Watch 163-150-20-0F05FZ30R . we guarantee every watch you receive will be exact watch you ordered. Each watch sold enjoy one year Warranty for free repair. Every order from aaa-replica-watches is shipped via EMS, the customer is responsible for the shipping fee on the first order, but since the second watch you buy from our site, the shipping cost is free. Please note that If the total amount of payment is over $600(USD), the customer is required to contact our customer service before sending the money in case failed payment. If you have any other questions please check our other pages or feel free to email us by service@aaa-replica-watch.com. The Same Corum Watches Series : Corum Bubble Large Chronograph Mens Watch 396-150-20-0F03FB30R : http://www.aaa-replica-watch.com/corum_bubble_large_396150200F03FB30R.html Corum Bubble Large Chronograph Mens Watch 396-150-20-0F05FZ30R : http://www.aaa-replica-watch.com/corum_bubble_large_396150200F05FZ30R.html Corum Bubble Large Stainless Steel Mens Watch 163-150-20-0F01FM30R : http://www.aaa-replica-watch.com/corum_bubble_large_163150200F01FM30R.html Corum Bubble XL Diamond Steel Purple Mens Watch 396-257-47-F166- FW30R : http://www.aaa-replica-watch.com/Corum_Mens_Watch_396_257_47_F166_FW30R.html Corum Bubble XL Diamond Steel Pink Unisex Watch 396-257-47-0F08- EB30R : http://www.aaa-replica-watch.com/Corum_Unisex_Watch_396_257_47_0F08_EB30R.html Corum Bubble XL Steel Black Mens Watch 396-250-20-B100-FM30R : http://www.aaa-replica-watch.com/Corum_Mens_Watch_396_250_20_B100_FM30R.html Corum Bubble XL Steel Blue Mens Watch 396-250-20-B100-FB30R : http://www.aaa-replica-watch.com/Corum_Mens_Watch_396_250_20_B100_FB30R.html Corum Bubble XL Steel Silver Mens Watch 396-250-20-B100-EB30R : http://www.aaa-replica-watch.com/Corum_Mens_Watch_396_250_20_B100_EB30R.html Corum Bubble XL Steel Red Mens Watch 396-250-20-0F06-FR30R : http://www.aaa-replica-watch.com/Corum_Mens_Watch_396_250_20_0F06_FR30R.html Corum Bubble XL Steel Yellow Mens Watch 396-250-20-0F05-FZ30R : http://www.aaa-replica-watch.com/Corum_Mens_Watch_396_250_20_0F05_FZ30R.html Corum Bubble XL Steel Orange Mens Watch 396-250-20-0F04-FO30R : http://www.aaa-replica-watch.com/Corum_Mens_Watch_396_250_20_0F04_FO30R.html Corum Bubble XL Diamond Steel Yellow Mens Watch 396-157-47-F165- FJ30R : http://www.aaa-replica-watch.com/Corum_Mens_Watch_396_157_47_F165_FJ30R.html Tag: Sharepoint Extranet disabled RWW Tag: 387121

Scenario:

I've setup an extranet site on SBS03. When I applied SSL certificate to it,
I can no longer access the RWW and OWA sites. Before I did this, I had not
problems.

Setup:

https://file.domain.com goes to sharepoint extranet
https://file.domain.com/remote userd to work, but no longer does.

I understand that /remote is a part of the default web site and the extranet
has it's own site. But i'm not sure the best way to correct this.

any suggestions?

Top

RE: Sharepoint Extranet disabled RWW by zeiss

zeiss
Sat Mar 29 09:00:01 PDT 2008

How did you setup the extranet? and how did apply the certificate?

"chuckie126" wrote:

> Scenario:
>
> I've setup an extranet site on SBS03. When I applied SSL certificate to it,
> I can no longer access the RWW and OWA sites. Before I did this, I had not
> problems.
>
> Setup:
>
> https://file.domain.com goes to sharepoint extranet
> https://file.domain.com/remote userd to work, but no longer does.
>
> I understand that /remote is a part of the default web site and the extranet
> has it's own site. But i'm not sure the best way to correct this.
>
>
> any suggestions?

Top