Mapping Drives

Tutorials Win: Microsoft Windows Forum

- Previous
 - 1
 - SBS Backup Error ID 5634 Any idea as to why the backup routine cannot see my tape drive/media anymore - the log says "identify media failed or was invalid". I've tried using tapes that have been used successfully before. Tag: Mapping Drives Tag: 50071
 - 2
 - SBS2K3 Network Neighbourhood Heres the scenario: LAN A - SBS2003 MSVPN Connection to LANB Also running SBS2003 I want to be able to browse the remote lan via network neighbourhood but it doesnt see the remote domain. Both are running wins/dns/dhcp. The vpn connection is fine and I can open remote shares etc but not through network neighbourhood. My reason for trying this is that I've got veritas backup exec 9.1 running on servera and the remote client running on serverb. When I had both machines on the same lan I could browse and hence run a full backup. However, as soon as I take server b off the local lan in a different location and incorporate the vpn connection the domain browsing is lost. Anybody have any ideas? I've been all round the houses with regards to wins settings, firewall ports, registry changes for RRAS etc but to no avail. cheers Tony Tag: Mapping Drives Tag: 50066
 - 3
 - security hey, for some reason the users on my newly installed sbs network all get asked if they want to open the file, because it could be unsafe, whenever the open a shortcut or many other types of file, i have tryed lowering the security level for the local intranet in ie to no avail, i am completly stuck on this one any help would be greatly appreciated thanks shane Tag: Mapping Drives Tag: 50065
 - 4
 - Exchange Transport SMTP event 7002 This is a multi-part message in MIME format. ------=_NextPart_000_00A3_01C452D2.3DC42110 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable One of my clients has recently been having thousands of event 7002 in = the applications event log. =20 The text of the event is: "This is an SMTP protocol warning log for virtual server ID 1, = connection #13. The remote host "123.123.123.123", responded to the SMTP = command "rcpt" with "450 xyz@xyzdomain.com: Recipient address rejected: = Domain not found ". The full command sent was "RCPT = TO:xyzi@xyzdomain.com ". This may cause the connection to fail. " These events are repeated hundreds of times - usually with the same = recipient, but occasionally with others. On the outgoing email section of the SBS Server Usage Report, one user = is shown as having a massive amount of outgoing emails. We changed = passwords on the account, and followed KB 324958's recommendation to = turn on logging, but can't see any of the Event Id 1708 which would = indicate that the user's passwords were hacked. I believe that these 7002 events started after installing the SBS POP3 = update KB835734. Is it just a sign that the update is doing its job? = Or some other form of relaying? I can't find anything relevant in = eventid.net or the ms KB. Thanks in advance. ------=_NextPart_000_00A3_01C452D2.3DC42110 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Diso-8859-1"> <META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY> <DIV> One of my clients has recently been = having thousands=20 of event 7002 in the applications event log.   = The text of the event is: "This is an SMTP protocol warning log for = virtual=20 server ID 1, connection #13. The remote host "123.123.123.123", = responded to the=20 SMTP command "rcpt" with "450 <A=20 href=3D"mailto:xyz@xyzdomain.com">xyz@xyzdomain.com</A>: Recipient = address=20 rejected: Domain not found ". The full command sent was "RCPT TO:<A=20 href=3D"mailto:xyzi@xyzdomain.">xyzi@xyzdomain.</A>com ". This may cause = the=20 connection to fail. " These events are repeated hundreds of = times - usually=20 with the same recipient, but occasionally with others. On the outgoing email section of the SBS = Server Usage=20 Report, one user is shown as having a massive amount of outgoing = emails. =20 We changed passwords on the account, and followed KB 324958's = recommendation to=20 turn on logging, but can't see any of the Event Id 1708 which would = indicate=20 that the user's passwords were hacked. I believe that these 7002 events started = after=20 installing the SBS POP3 update KB835734.  Is it just a sign that = the update=20 is doing its job?  Or some other form of relaying?  I can't = find=20 anything relevant in eventid.net or the ms KB. Thanks in advance.      </DIV></BODY></HTML> ------=_NextPart_000_00A3_01C452D2.3DC42110-- Tag: Mapping Drives Tag: 50063
 - 5
 - SBS2003 licencing POP3 "Every client connection requires a CAL if the client computer accesses network or server application services, such as : Exchange services, File services, Printing services and Remote access services." This is what the SBS2003 help says about licencing. What about the following accesses, do they need one CAL too ? - external users that have only an Exchange POP3 box on our Exchange server ? - custom recepients or e-mail enabled accounts, set up for forwarding E-mail from our domain to an E-mail address on another provider Tag: Mapping Drives Tag: 50050
 - 6
 - Bugcheck 0x0000001d (0xdeadfd06.... problem Hello, We have a Compaq Proliant server with Microsoft Small Business Server 2000 and receive at random times the following bug check: The computer has rebooted from a bug check. The bug check was: 0x0000001d (0xdeadfd06, 0x00000002, 0x00000000, 0xf1ecb51e). Microsoft Windows 2000 [v15.2195]. I search the internet and only come up with something about a IPX protocol, but I only have TCP/IP, Microsoft Client and File/Printer sharing installed. I also found something about USB driver problem on Windows XP. We have a Smart UPS USB connected. We also have this configuration at multiple customers who have no problem so I don't think this USB is the problem. This bug check is always the same and comes around 10 times per month at different times. Also during the day so I don't think something with back-up schedules, nightly maintenance has something to do with it. Any ideas? Best regards, Peter Tag: Mapping Drives Tag: 50049
 - 7
 - CALs and eula I have purchased SBS 2003 recently and ended up with incomplete install so the server does not know it is a PDC, hence EULA error messages and auto shutdown , which from this news group I find I should run the integrated setup. The server is fully functional and in use so this looks a bit risky, we will make a Ghost image then try run setup. My main query is the 5 CALS we have. I have connected more than 5 PC's at once all connecting to the SQL Server with separate VB and Access apps. I expect to purchase more CALS but am not sure why SBS has not complained yet, is this tied in with the above? (I do remember being asked about licencing re per server/per seat or something similar) and selected per seat ... this part I found unexpected as did not get this question when installing our development PC ? Any advice on CALS and licencing appreciatted B Moor Tag: Mapping Drives Tag: 50045
 - 8
 - << Small Biz server news [was posted last night and got lost in the Kevin's song of the week..... news://msnews.microsoft.com/u59UrcMUEHA.3332@tk2msftngp13.phx.gbl KB's of interest.... 834141 - FIX: IP address is revealed in the content-location field in the TCP header in IIS 6.0: http://support.microsoft.com/?kbid=834141 843073 - Non-English language reports contain English text after you install Service Pack 2 in ISA Server 2000: http://support.microsoft.com/?kbid=843073 837019 - Description of the Outlook 2003 hotfix package: March 17, 2004: http://support.microsoft.com/?kbid=837019 837365 - You cannot expand the public folders list in Exchange System Manager on a Windows Small Business Server 2003-based computer: http://support.microsoft.com/?kbid=837365 836413 - You receive an "unexpected error occurred" error message when you try to access resources on a Windows-based network from your Macintosh computer: http://support.microsoft.com/?kbid=836413 840685 - An event ID 1000 error message is logged to the application event log when you restart Windows Small Business Server 2003: http://support.microsoft.com/?kbid=840685 <<SMBnation announces Dr. Tom [Mr. ISA] Shinder and Brian Livingston as Keynoters http://www.smbnation.com/ >> Last week two security patches for Microsoft products - one for DirectX, one for CRM applications. Microsoft Security Bulletin MS04-016: Vulnerability in DirectPlay Could Allow Denial of Service (839643): http://www.microsoft.com/technet/security/Bulletin/MS04-016.mspx Microsoft Security Bulletin MS04-017: Vulnerability in Crystal Reports Web Viewer Could Allow Information Disclosure and Denial of Service (842689): http://www.microsoft.com/technet/security/Bulletin/MS04-017.mspx No patch for this one - take mediation at this time.... (1) HIGH: Internet Explorer Multiple Vulnerabilities Affected: IE 6.0 and 6.0 SP1 Description: Fully patched versions of Internet Explorer reportedly contain the following vulnerabilities that are being exploited in thewild to compromise client systems. (a) Internet Explorer successfully processes a webserver response that redirects the location of a resourceto a file on the client system. Note that this file can be accessed inthe security context of the "Local Computer Zone". (b) Internet Explorer contains a cross-domain vulnerability that can be triggered whenhandling a frame, and a "modal dialog box" that is invoked from theframe. These vulnerabilities can be exploited by a malicious website toexecute arbitrary code on a client system. The technical details and theexploits have been publicly posted. Status: Microsoft not confirmed, no patches available.Council Site Actions: Most of the reporting council sites are awaitingthe vendor patches. Some sites plan to roll out the patch during thenormal system update cycle and others plan to expedite the rollout.Several sites have already notified their desktop support teams to beaware of the problem. http://archives.neohapsis.com/archives/fulldisclosure/2004-06/0031.html Analysis by Jelmer CERT Advisoryhttp://www.kb.cert.org/vuls/id/713878 --------------------- UPDATE - YES IT WORKS JUST FINE ON XP WITH IE6 and even works like a champ on XP sp2] So I just kicked my workstation at the office and the workstation at home's Internet explorer to ?high security? settings. What that means is that I've shut down the scripting and active X to be automatically blocked at all times. Then if I have a web site that I really trust and know if an OK site, I add it to ?my trusted site? list. Now this normally is a pain and a bother.... tools, options, security, internet zone, add sites, blah blah... way way way too cumbersome. Well not anymore! My MVP buddies showed me this gem -- http://www.microsoft.com/windows/ie/previous/webaccess/pwrtwks.mspx This little IE addition adds a quick shortcut under ?Tools? for ?add to trusted sites?. I just did this to a couple of people at the office and here at home and showed them all they have to do when they get to a web site that they really ?need? to have working [like a business site] they can add the site to the trusted zone and hit ?refresh? and voila. Very nice. Very much safer out here. I've also adjusted my "trusted zone" to not be "low" and instead is now "medium" so it prompts me instead of automatically scripting. And add sites to the trusted zone SPARINGLY. **************************************************************** (2) MODERATE: Oracle E-Business Suite SQL Injection VulnerabilitiesAffected: Oracle E-Business Suite versions 11i, 11.5.1 to 11.5.8Oracle Applications version 11.0Description: Oracle E-Business suite offers a set of applications toautomate business processes such as marketing, customer services,supply-chain management etc. The pertinent business information istypically stored in a single database, and accessed via the webfront-end offered by the E-Business suite applications. This suitecontains multiple SQL injection vulnerabilities. These flaws can beexploited via malicious HTTP requests to execute arbitrary SQLstatements and procedures against the back-end database, possiblyresulting in the compromise of the entire database. Note that theInternet facing web servers hosting the E-Business suite applicationsface the maximum risk. Very limited technical details regarding how toexploit the flaws have been posted.Status: Vendor confirmed, updates available.Council Site Actions: Only one of the reporting council sites is usingthe affected software; however their Oracle servers are internal facingonly. They plan to install the patches after regression testing.Referencesosting by Integrigy Securityhttp://archives.neohapsis.com/archives/vulnwatch/2004-q2/0032.html Oracle Security Advisoryhttp://otn.oracle.com/deploy/security/pdf/2004alert67.pdf Oracle E-Business Suite Homepagehttp://www.oracle.com/applications/index.html SecurityFocus BIDhttp://www.securityfocus.com/bid/10465 California identity theft law remains low-key Nearly a year after California's landmark SB 1386 identity theft law went into effect, there has been none of the troublesome litigation that had been predicted to come in its wake. But the law has raised overall corporate awareness of the need to have strong privacy protections in place, legal experts said last week. http://computerworld.com/securitytopics/security/privacy/story/0,10801,93667,00.htmlPreventing identity theft focus of regional meetinghttp://www.usatoday.com/tech/news/2004-06-08-id-theft_x.htm Security gaps in Dutch airline and government wireless networksDuring its special on computer attacks on June 3, the Dutch current-affairs programme, Zembla, demonstrated to television viewers just how easy it is to break into wi-fi networks and gain access to confidential information. The networks found to be lacking in security were operated by the Dutch airline, KLM, and the Ministry for Public Works and Water Management (Rijkswaterstaat). http://www.dmeurope.com/default.asp?ArticleID=1984 GAO points to airport security holes http://www.fcw.com/fcw/articles/2004/0607/web-gaotsa-06-08-04.asp - - - - - - - - - - Russia and China 'behind current spam deluge' As hardcore criminals step up their spamming, experts believe that nine out of 10 of all emails may soon be unsolicited junk. Organised criminals based in Russia are fuelling the rise in the amount of spam sent over the Internet, according to a leading opponent of junk mail. http://news.zdnet.co.uk/internet/security/0,39020375,39157120,00.htm - - - - - - - - - - Woman fights for new domain to protect children Three years ago, Mary Conyers was shocked and horrified when her granddaughter accidentally pulled up an a___t website on the Internet. ?She finished her homework and was going to look at Teen magazine and bam! there it was,? Conyers, the founder of Protect Every Child, said. A simple spelling error sent Conyers' granddaughter to this p_____graphic website featuring teenagers. At that moment, Conyers made a promise to her granddaughter that she's still fighting to keep. http://rdu.news14.com/content/headlines/?ArID=48769&SecID=2 - - - - - - - - - - Apple posts second Mac OS X vuln patch Update Apple has posted a second software update intended to fix a vulnerability that exploits the way Mac OS X handles URI links. We installed the update, Security Update 2004-06-07, on a Mac OS X 10.3.4 machine. After restarting the machine, we went straight to Unsanity's web site, the location of a pair of web pages that test the URI vulnerability. Neither tests was blocked by the update, details of which can be found here. http://www.wired.com/news/mac/0,2125,63756,00.html - - - - - - - - - - Microsoft releases monthly security patches Microsoft Corp. released software updates for versions of Windows XP and Windows Server 2003 and warned customers about a security vulnerability in a Windows component called IDirectPlay4, which is used to support multiplayer network games. http://security.itworld.com/4940/040608mssecurity/page_1.html http://zdnet.com.com/2100-1105-5228887.html http://news.com.com/Microsoft+patches+a+pair+of+flaws/2100-1002_3-5228887.html http://computerworld.com/securitytopics/security/story/0,10801,93728,00.html - - - - - - - - - - Symantec: New Virus Deletes All Files Security The virus that "deletes your whole hard drive" has been a staple in dozens of e-mail hoaxes that have circulated the Net in recent years. In the real world, such viruses are few and far between. According to Symantec, the new VBS.Pub is just such a beast. http://news.netcraft.com/archives/2004/06/08/symantec_new_virus_deletes_all_files.html Another Trojan on the attack http://news.zdnet.co.uk/internet/security/0,39020375,39157002,00.htm - - - - - - - - - - Cisco picks Trend to fight network worms Cisco and Trend Micro yesterday extended an existing security alliance with a deal to combine their respective technologies in the fight against network worms and computer viruses. Trend is among three AV companies who signed up to Cisco's Network Admission Control (NAC) program last year, a scheme designed to curtail the spread of computer worms across internal networks. http://www.theregister.co.uk/2004/06/08/cisco_trend_fight_worms/ http://www.newsfactor.com/story.xhtml?story_title=Cisco-Picks-Trend-To-Fight-Worms&story_id=24489 - - - - - - - - - - Intrusion-prevention start-up touts 'memory firewall' The growing speed at which malicious hackers can exploit new vulnerabilities is creating a need for intrusion-prevention technologies capable of proactively detecting and blocking attacks even before software fixes become available for them. With that need in mind, Determina Inc., a Redwood City, Calif.-based start-up being launched today, is introducing new technology that it claims offers a better way to head off attacks than other intrusion-prevention products. http://computerworld.com/securitytopics/security/story/0,10801,93701,00.html - - - - - - - - - - Michigan man pleads guilty to wireless hack into stores A Michigan man pleaded guilty on Friday to four counts of wire fraud and unauthorized access to a computer after he and two accomplices used a vulnerable wireless network at a Lowe's Companies Inc. store in Michigan to attempt to steal credit card numbers from the company's main computer systems in North Carolina and other Lowe's stores in the U.S. Brian Salcedo could face up to 18 years in prison for the crime, which the government claims could have caused more than $2.5 million in damages. http://computerworld.com/securitytopics/security/cybercrime/story/0,10801,93708,00.html http://www.theregister.co.uk/2004/06/07/us_wardriver_guilty_plea/ - - - - - - - - - - New virus cracks credit cards A new computer virus "Korgo" raging now in Europe, Asia and North America decodes numbers of credit cards used in online systems, an Austrian Internet service provider "Vienna Online" informed. Therein virus looks like its predecessor "Sasser" worm, which incurred huge damage to companies and individuals, ISP experts said. http://www.crime-research.org/news/07.06.2004/409/ - - - - - - - - - - UK law firms fall down on security One in 10 UK legal firms has suffered an IT security failure and one in 20 has lost a client because of it, a report claims. Research by NOP, commissioned by security VAR Evolution Systems, also found worryingly high levels of IT insecurity among the 100 legal practitioners it surveyed. http://www.vnunet.com/news/1155655 - - - - - - - - - Virus writers deploy bulk mail software Hackers have used spamming software to distribute thousands of copies of a new Trojan. Email filtering firm MessageLabs alone has intercepted more than 4,000 copies of the Demonize-T Trojan over the last 24 hours. Demonize-T is a multi-stage Trojan that uses an object data exploit in Internet Explorer (patch here) to download and execute an encoded visual basic script from a website. http://www.theregister.co.uk/2004/06/07/demonize_trojan/ - - - - - - - - - - CPU-based security for Windows XP, Red Hat Linux coming Microsoft Windows XP Service Pack 2 and the next version of Red Hat Enterprise Linux 3 will support new CPU-based security protections designed to stop incoming malicious executable code from being triggered. http://computerworld.com/securitytopics/security/story/0,10801,93712,00.html - - - - - - - - - - NIST keeps publishing One way to quantify the growth in importance of computer security work is to count the pages of security guidelines published by the National Institute of Standards and Technology in the past year. The total is 1,200 pages, said Ed Roback, chief of the Computer Security Division. Speaking June 4 in Washington, D.C., at the E-Gov Institute's Annual Government Solutions Forum, Roback said documents on topics as unremarkable sounding as security categorization often generate strong responses. http://www.fcw.com/fcw/articles/2004/0607/web-nist-06-07-04.asp - - - - - - - - - - Data theft detective work begins at the office Intellectual property and other sensitive consumer data are seeping out the doors of corporations at an alarming rate -- and the culprits aren't necessarily a cracker with a broadband connection holed up in his mom's basement, or a wiseguy who's Dumpster diving. Users nestled inside the enterprise firewall with an abundance of unmanaged privileges are most often to blame, according to a soon-to-be-released study conducted by the director of an identity theft program at Michigan State University. http://searchsecurity.techtarget.com/originalContent/0,289142,sid14_gci968920,00.html Passwords can sit on hard disks for years http://www.newscientist.com/news/news.jsp?id=ns99995064 RSA focuses anew on the password problem http://computerworld.com/securitytopics/security/story/0,10801,93711,00.html - - - - - - - - - - The Deadly Duo: Spam and Viruses A small nugget of good news lies buried among the mountains of unsolicited commercial e-mail: the spam volume held steady from April to May, according to two leading e-mail processing firms. Brightmail's Probe Network found that spam leveled at 64 percent, while Postini measured the monthly volume unchanged at 78 percent. According to Brightmail's assessments, the last time the spam volume was unchanged was August 2003 when it maintained a 50 percent level. http://www.internetnews.com/stats/article.php/3364421 - - - - - - - - - - Where, Oh Where Is Windows XP SP2?: http://www.microsoft-watch.com/article2/0,1995,1611161,00.asp RC2 of XP expected any day... stay tuned.... UPDATE - Microsoft Offers Second Release Candidate for Windows XP SP2: http://www.eweek.com/article2/0,1759,1612473,00.asp Expected to be out shortly.... -- http://www.sbslinks.com/really.htm Tag: Mapping Drives Tag: 50043
 - 9
 - CAL Question SBS 2k3 comes with 5 cals out of the box. If I add 5 CALs, do I need to also add 5 Exchange Server CALs? Tag: Mapping Drives Tag: 50034
 - 10
 - Hang: When Adding New user at "Configuring Group Membership Settings" Greetings: Every time I try to add users using either a template or manually, the Add User Wizard hangs at the 50% mark during the "Configuring Group Membership Settings" phase This makes me have to Kill the app in Taskmanager in order to close the wizard. I can't imagine subsequent users being configured correctly after this. Using SBS 2003 Premium Edition with all updates to date. Thank you for any assistance you can offer. d Tag: Mapping Drives Tag: 50033
 - 11
 - I'm getting this alert all of sudden? Hi, This morning I've started getting quite a few of these alerts. I've checked the queue and there was a SMTP connector from yahoo.com with about 20 emails there from a user I don't know. I've followed the MS Knowledge base article to see if our server is an open relay, and it's not. Whats going on here? Thanks Tristan www.backpackpro.com Alert on OURSERVER at 15/06/2004 3:35:47 p.m. A large number of messages are pending in the e-mail server send queue. Verify that you have Internet connectivity. If you can view Web sites normally, contact your Internet service provider (ISP) to determine if there is a problem with their e-mail server. You can disable this alert or change its threshold by using the Change Alert Notifications task in the Server Management Monitoring and Reporting taskpad. Tag: Mapping Drives Tag: 50015
 - 12
 - Setting up Exchange Server: SBCyahoo & Namecheap I am setting up Exchange on an SBS2K3P with ISA installed. 2 NICS with the Server WAN NIC going to a Cayman 3546 (DSL) & out to SBCYahoo http://www.netopia.com/equipment/pdf/spec/3500.pdf SBCYahoo is serving a static connection with DHCP out of the Cayman. I have registered the public domain with Namecheap.com. I have SBS2K3 Premium installed & am getting out through the Cayman just fine. I am WAY confused about setting up DNS, MX, MXE, CNAME & 'A' records. Do I do this on the NAMECHEAP site (they have what appears to be good host setup tools) or on the SBSYahoo side ? I need a little bit of a primer on the what, where and how to enter the info in order to get SMTP up and running on the Exchange Server. There is a POPMAIL account on the SBCYahoo side that I want to foward into Exchange too, but that should be simple enough. TIA!!! Tag: Mapping Drives Tag: 50010
 - 13
 - XP Client Can't Log In To Server After Initial Setup To All: I have just set up a new SBS 2003 Premium server. I have been able to get my new XP Pro clients to connect to the server (Http://server/ConnectComputer). After the Administrator and the proper User are selected, together with the proper Computer, the client system reboots, connects to the server and initiates some activity that is impossible to see due to the speed at which it executes. After the second reboot of the client system, if I try to log in to the server using the Username and Password that were created during the server setup, I get a message that the client cannot connect to the domain or the user cannot be found. Before I continue setting up additional client computers (and possibly creating more of the same problems) I would like to know how I can resolve this problem on the two systems that are unable to log on to the server. Any assistance will be gratefully appreciated. Bob N. Tag: Mapping Drives Tag: 50004
 - 14
 - Exchange server question Hello, I reinstalling SBS2003 for the 7th time. I am having fun though. I do have a few question. I would like to use POP3 Connector to retrieve emails from various providers and then send it to one mailbox. I would like reply to an email and have the reply to name to appear as the domain that I have received it from. For example, I am retrieving emails from domain1.com (from isp1) and domain2.com (from isp2). The emails goes to mailbox1. When I reply to emails from domain1.com, I want the reply to email to say someone@domain1.com. The same goes to domain2.com. I want to avoid creating different mailbox for each domain if at all possible. Can this be done or am I pretty much asking something that is pretty rare? :) Any help and or advice would be much appreciated. Tag: Mapping Drives Tag: 49999
 - 15
 - SBS2003 Premium download problems Hi NG, Have a SBS2003 Premium Server with ISA2000 loaded, dual NIC, broadband connected to the external NIC. Clients use SecureNAT (firewall client not loaded anywhere). The server has a pair of Realtek 8139 NICs in it. It will happily work on the internet and web pages can be browsed. However when an attempt is made to download files EG: MSDE off www.microsoft.com, it starts then stalls. About 100K of the file is downloaded and that is all. Seems to happen regardless of which site. Ran the Connect to the Internet on the To Do list and changed over to a dial up connection on a different ISP. No problems downloading. Therefore thought it was the braodband ISP. So configured a standalone workstation and plugged it into the ADSL modem on the broadband ISP. Again, no problems downloading. Reconfigured back to the SBS2003 server running on the ADSL and no downloads. Have tried resetting the ISA cache to different sizes. Have also deleted ISA cache to force it to rebuild it. All to no avail. Can anyone help with advice on where to look next? Do I have to reinstall the server? HELP!!! Karl from Oz Tag: Mapping Drives Tag: 49995
 - 16
 - receive double email I have SBS2003 Server. and, I am using POP3 which I have one global account, and all users receive email from exchange server. Ther are some users that have received every email twice. Is there any place that I can check out from Exchange server. Jimmy Tag: Mapping Drives Tag: 49994
 - 17
 - CAL's question According to Microsoft site: "The number of Windows Small Business Server 2003 CALs required equals the maximum number of users or devices that may simultaneously access or use the server software installed on a particular server. The Windows Small Business Server 2003 CALs that you purchase are designated for use exclusively with a particular server." so can the number of users setup exceed the number of licenses? providing that they are not logged on to SBS2k3 in the same time? Would there be any problems with the Exchange licensing when the number of mailboxes exceeds the number of licenses? Ie: there will be some remote users checking their email once in a while... Thank you, Daniel Tag: Mapping Drives Tag: 49981
 - 18
 - Installed on wrong drive I recently installed SBS 2003 standard on a new server. I have a mirrored drive set partitioned to a C of 10Gig and a D of 140 Gig. I thought I had installed exchange on the D drive. However, when I went back and checked it was on the C drive. Is there any way to change the drive without too much pain or having to reload the server? Tag: Mapping Drives Tag: 49973
 - 19
 - reports Hi I was receiving reports on a daily basis frm the server, however yesterday and today i receive this No Performance data is available at this time. Performance data is collected hourly. i will try a reboot of the computer, however can anyone tell me what service runs this and how to check. or would i just run the to do list (report function) again thanks Tag: Mapping Drives Tag: 49968
 - 20
 - SBS 2000 & SBS 2003 Does anyone know if you can have a PDC running SBS 2000 and a BDC or separate Exchange Server running SBS 2003? I know a limitation of SBS 2000 is that you can only have one "server" in the organization/domain. Tag: Mapping Drives Tag: 49967
 - 21
 - ISA - 403 Forbidden I recently added a router in front of SBS2k3 with ISA - 2 NICs (2 static IP's). All ports required :80, 443, 444, 4125.... on the router have been forwarded to the external SBS static IP. The problem is that when I run CEICW, unless I select "Allow access to the entire site from the internet" under web service configuration in Firewall settings, I can't access the site remotely and get this message: "403 Forbidden - The server denies the specified Uniform Resource Locator (URL). Contact the server administrator. (12202) Internet Security and Acceleration Server" Before the router installation I had selected only certain web site services such as OWA and RWW and it worked fine. If I select "Allow access to the entire site from the internet " everything works fine, but it publishes the entire website, so I had to block port 80 and use only https://xxx/remote, or /exchange. Any suggestions? Thank you, Daniel Tag: Mapping Drives Tag: 49961
 - 22
 - Problem connecting to Desktop Hi, SBS2003 Std. I can connect to RWW and once in I can use OWA. But I cannot connect to the server or client desktops. The client machines say they may not be configured for remote access, I will check when I go in next. The server though, starts the process but just leaves a blank white screen, no error messages. I have run CEICW (via radmin) several times without any problems. Can anyone provide me with a few ideas? -- John Harris (Harry) Computer Troubleshooters - Hornby Christchurch New Zealand Tag: Mapping Drives Tag: 49950
 - 23
 - SBS03 Mail incorrectly routed to Administrator Hi, In 3 SBS03 installations I have found that certain inbound mail is not directed to the user, but lands in the Administrator account. Sometimes, it is only mail with attachments, and some sender's email always lands there. There never appears to be anything wrong with the email, and I can forward it out of the Admin account to the correct user... if I actually spot it. This is affecting less than 1% of the email... but it's a pain. Is anyone else experiencing this, and is there a fix? Thanks in advance, Doug Tag: Mapping Drives Tag: 49941
 - 24
 - Dual Boot with Windows XP Pro Hi, I want to install SBS2003 on another primary partition of my Windows XP Pro computer. Does anybody know whether it is possible to boot these 2 systems in a manner like a boot manager does. I don't want to access these two systems simultaneously. The installation of SBS2003 will only serve for experiments. Thanks in advance, Zbigniew Tag: Mapping Drives Tag: 49940
 - 25
 - Inbound email incorrectly routed to Administrator Hi, In 3 SBS03 installations I have found that certain inbound mail is not directed to the user, but lands in the Administrator account. Sometimes, it is only mail with attachments, and some sender's email always lands there. There never appears to be anything wrong with the email, and I can forward it out of the Admin account to the correct user... if I actually spot it. This is affecting less than 1% of the email... but it's a pain. Is anyone else experiencing this, and is there a fix? Thanks in advance, Doug Tag: Mapping Drives Tag: 49939
- Next
 - 1
 - SBS + member servers I understand that SBS cannot coexist with other DCs in the same network, but can I have other member servers, say, as file servers? Tag: Mapping Drives Tag: 49937
 - 2
 - Critical Updates will not install I am running Server 2003 Small Bus Ed., and the following critical updates will not install: 835732 830352 828035 825119 823182 828026 824141 Other critical updates have installed, these get downloaded but not installed. Any ideas would be appreciated-Thanks Tag: Mapping Drives Tag: 49936
 - 3
 - SBS 2003 + dialup Is anyone running SBS 2003 with just dialup access? I have one site, where only dialup is available they are currently running SBS 4.5 and its terrible. Is the 2003 handling of dialup any better? They are using a US robotics 56k modem. (i beleive its on the hardware list.) Thanks Aart Tag: Mapping Drives Tag: 49934
 - 4
 - Migrate SBS into Windows NT Domain I'm getting ready to install SBS2000 in my network (NT domain controller). After I install SBS, will the NT domain controller (PDC) get demoted automatically? I uderstand that I'll have to create all new user accounts on the new PDC. Thanks, Dale Tag: Mapping Drives Tag: 49931
 - 5
 - Error 800 when trying to use VPN I'm trying to connect using Remote connection wizard and I'm receiving an error 800 when connecting. Any ideas? Steve L. Tag: Mapping Drives Tag: 49917
 - 6
 - Exchange 2003 Is it safe to install Exchange 2003 Service Pack 1 on SBS 2003. Or is this like the older versions of SBS where Microsoft will release a cumilitive service pack? I just wanted to know before I made a mistake. Thanks! Tag: Mapping Drives Tag: 49915
 - 7
 - Correct way to configure POP3 Global Hi, I wish to know what is the correct approach for setting up POP3 global. Also what is required at the ISP end and how should that be configured. We are juggling ISP's at the moment due to a few unforseen problems, and just wanted to know whats the best way. ISP with the pop3 account has adopted our domain and e-mail side. SBS2003 Prem, NIC1: LAN NIC2:2 Router -> ADSL All working perfectly at the moment OWA,RWW etc all working fine. Mails have been coming in on ETRN SMTP until a week ago. Whats the best way. Cheers. Regards Chris White Tag: Mapping Drives Tag: 49912
 - 8
 - Outlook won't close I am running sbs 2003. I installed Outlook from the server on all my clients (25 running XP Pro). On most of the clients when they shutdown outlook the little icon in the lower right side stays there and when they try to open it again it says that outlook cannot contact the server. This does not happen on about 3 or 4 of the clients. I have to go to task manager and kill the process before they can open Outlook again. Any Help PLEASE!!!! This is running me crazy. I try to get them to just open Outlook and leave it open but 5 or 6 times a day people try to close it and I have to go and restart it for them... Thanks, Bobby Tag: Mapping Drives Tag: 49903
 - 9
 - One ISsued Solve on Upgrade...two more happening Hi all... I finally got the TO DO list and pop3 working on the new box but still having two other issues and would like to see what you all can offer, since you pointed me right at it last time (no dual posts this time I promise). 1. Some users have internet access and others don't. I have everyone setup the same but cannot connect on all systems. Mine, which I am on now, is working fine with Auto detect proxy. I have tried pointing at the server and this setting on the others and no luck. Any ideas? 2. My DNS settings keep resetting to the local box at 192.168.1.2. They should be something different. I change them but they keep resetting. Reason? 3. Have NO access to companyweb (already installed the recommended updates) but do have access to OWA. TIA Tag: Mapping Drives Tag: 49902
 - 10
 - Backup status via e-mail Is there a way to configure the server to e-mail or popup a window on a specified client machine with the status of the backup. Something like... "Backup Successful" or "Backup Failed." I would be interested to know if anyone has any ideas on this matter. Thanks! Tag: Mapping Drives Tag: 49900
 - 11
 - Exchange "Pending" Queue My "Messages Pending Submission" queue has quite a few messages that appear to be going nowhere. Is this normal? Paul Tag: Mapping Drives Tag: 49895
 - 12
 - Outlook web access not working Good Afternoon, I'm trying to connect to our new SBS2003 exchange server through OWA with no luck. we still have our old exchange server up and our mx record points to it. I'm using servername.domain name/exchange where domain name is our dns name of out present server xxxxx.com. do we need our mx record to point the new SBS server in order for this to work? Steve L. Tag: Mapping Drives Tag: 49891
 - 13
 - Renaming Exchange domain after SBS 2K migration Hi: I can't find any documentation that explicitly steps through the process of maintaining my current Exchange domain after migrating from my SBS2000 source server to the new SBS2003 destination server. I'm guessing that I will have a "dummy" exchange domain on the destination server that will be renamed after the source server is retired? Is that, in essence, what needs to be done, or is there anything else I need to know? Thanks. Tag: Mapping Drives Tag: 49888
 - 14
 - Maybe I'm doing this wrong? Calendar Sharing I have a team of users who want a group calendar which one person will administer but the others can view, add and make changes. Originally I created a separate calendar under the Mailbox of the person who will adminster it and gave the team Author rights. I did sharing properties of this calendar and when I try to open it from a team members desktop I cannot. I've tried creating a calendar in Public Folders and sharing it out the same way, but in order for people to view the calendar they have to physically drill to the folder to view it. The team wants the calendar side by side to their personal calendars so they can compare appts and conflicts. What am I doing wrong, I used to do this all the time but feel I might be missing a step or several steps. Thanks, Fred Tag: Mapping Drives Tag: 49885
 - 15
 - Antivirus solution for SBS2003 Can anyone recommend a good antivirus solution for SBS2003? Is there anything that has been specifically designed for SBS2003 or a good All-in-one solution? We are currently running Symantec Corporate Edition 7.6, but if we end up using Exchange on SBS2003 to host our email, I want to make sure that it is also protected. Thanks, Phil Tag: Mapping Drives Tag: 49882
 - 16
 - Question about POP3 connector We are currently not running SBS2003, but we are heading that direction in less than a month. And I would like to know how exactly does the POP3 connector work in SBS2003? Thanks, Phil Tag: Mapping Drives Tag: 49881
 - 17
 - upgrade: 2Kserver to 2k3 SBS unable to change the license # to 5 as SBS requires Any idea ? thank you Tag: Mapping Drives Tag: 49877
 - 18
 - Getting emails from exchange into a 3rd party email client Hi group. I have been directed here today by a helpful microsoft employee. I have looked down the old posts some way but I haven't seen this problem raised... so here goes. I have recently bought a new server and installed sbs2003 premium. Most things work after some jiggling. However, I have been using a paperless office application called TCM4000 for 3 years now. All emails, phone calls, documents, faxes etc are kept in client folders. I want to know if I can configure TCM to look into my exchange mailbox and extract the emails from it. I know TCM will log into all the pop3 accounts I have directly, but when I am away on business, or off sick, or even a holiday, I would rather have exchange downloading the email every 15 minutes to stop the webserver pop3 boxes being filled up with uncollected mail. It must be possible to do as I know Lotus Notes gets emails from exchange, or have these big players tied up this part of the market to make us use notes or outlook for email. I am sorry it is a long post nut any insight into this will be very gratefully received. Ray Stewart Tag: Mapping Drives Tag: 49876
 - 19
 - pop3 connector to leave copy of message how do i make the pop3 connector in sbs2003 leave a copy of the email message on my ISP after it downloads? Please help. Tag: Mapping Drives Tag: 49874
 - 20
 - Resize Logical Drives on SBS2003 I'm looking for a product or tool to resize my SBS2003 drives. My C: is only 20 GB and is just about full. I want to move 20 GB of free space from D: to C:. I own PartitionMagic8, but it doesn't work on Servers. I own Server Magic and Volume Manager, but they don't work on Windows 2003 Server OS. Anyone know of a product that does work? Tag: Mapping Drives Tag: 49872
 - 21
 - Companyweb and 832880 I installed before nov24 and everything worked fine. Then I trasched my system installing the new sharepoint by misstake. I have now reinstalled IIS ,exhange and companyweb from the new CD3 I got from microsoft. When I run windows update and tries to install 832880 the installation fails every time. Tried many times the past week. Companyweb gives 403 Access denied.. Is there others updates that first needs to be installed again? Where can i see what got wrong? Tag: Mapping Drives Tag: 49868
 - 22
 - Problem with backup I had a problem with ntbackup when is shedule to run every day. The backup is done to shared folders in differents clients, normal backup y saving the backup file in the hard disk of the same server, the problem is that ntbackup close with a access memory error, (sometime in the middle or sometime at start of the backup) and the file of the backup cannot be read, sometimes the backup is done correctly for 2 or 3 days, but when the error happens, all the backups is damaged. I try make the backup with different options (incremental, etc), and do a manual backup, but I allways had errors with ntbackp.exe. The server is SBS 2003 standar and the clients WinXP Profesional. Tag: Mapping Drives Tag: 49867
 - 23
 - HDI turn off NDR? Where is the setting to block external NDRs? I believe I did this but just ran into a problem with thousands of emails bouncing off our server and now our ISP is blocking our outgoing email. Can someone also point me in the direction of a tip sheet to prevent relaying. Thanks. SBS2003 basic with Exchange 2003. Tag: Mapping Drives Tag: 49865
 - 24
 - Anyone seen this crypt 32 error before? I read some info on crypt32 a while back, don't think it was related to this though. Any ideas? crypt32 8 6/13/2004 2:57 PM 3 * Failed auto update retrieval of third-party root list sequence number from: <http://www.download.windowsupdate.com/msdownload/update/v3/static/trustedr/ en/authrootseq.txt> with error: This operation returned because the timeout period expired. Tag: Mapping Drives Tag: 49860
 - 25
 - RAM Usage out of control Hello, SBS2003 Premium. I have 3GB of RAM on my server. For the last four months, the performance monitor has been reporting about 2.9GB in use, with very little fluctuation. The only memory tweak I had performed was reducing ISA from 50% to 30%. Everything was great until last week. The memory usage crept up to 3.2GB...3.5GB... and last night 4GB. How is that possible if I've only got 3GB? I assumed the paging file. So last night I rebooted the server from home using RWW thinking it would reset RAM usage back to minimum. When I arrived this morning, printers were only working sporadically, I could not log on to the server locally, and I could not log on remotely. Using the event viewer on my workstation and connecting to the SBS server, I found tons of errors about log files that couldn't be written because there was insufficient RAM. Using the "services" MMC from my local pc, I connected it to my sbs server and stopped ISA and exchange. I was then able to log in to the server at the console. I changed ISA to use only 10% of RAM for caching. Everything else seemed okay, so I restarted the services. Looking at Task Manager on the SBS Server, I see that the pagefile in use reads 6.8GB, and the graph stays maxed out. Again, I only have 3 GB of RAM. There are only 15 pc's connected to this network. The server peformance report tells me that store.exe is abnormally high (same as every day since SP1) and lsass.exe. I don't know what lsass.exe is. Has anybody else seen anything strange lately or have any thoughts on what might be wrong? -Trevor Tag: Mapping Drives Tag: 49857

Hi,
I have a SBS2003 that we are using as a file/application
server. We have a number of machines that are running XP
Home, so we cannot logon using domain.
When these folks attempt to map a drive they see the
server with an "+" in front. When they double click the
server, the shared drives are not shown. The workgroup
is the server's domain. The users are defined on the
server (i.e. Allan locally logs on to his computer as
Allan and Allan exists on the server).
Any suggestions?
Thanks
Rich

Top

Re: Mapping Drives by Mal

Mal
Tue Jun 15 09:42:09 CDT 2004

1. Upgrade to XP Pro.
2. Try "Net use X: \\serververname\sharename
/user:lmdomainname/domainaccoutname

Mal Osborne
MCSE MVP Mensa

"Rich" <anonymous@discussions.microsoft.com> wrote in message
news:1c8cf01c452d0$7cf17290$a501280a@phx.gbl...
> Hi,
> I have a SBS2003 that we are using as a file/application
> server. We have a number of machines that are running XP
> Home, so we cannot logon using domain.
> When these folks attempt to map a drive they see the
> server with an "+" in front. When they double click the
> server, the shared drives are not shown. The workgroup
> is the server's domain. The users are defined on the
> server (i.e. Allan locally logs on to his computer as
> Allan and Allan exists on the server).
> Any suggestions?
> Thanks
> Rich

Top