winCE5.0 image downloading problem

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Web based administration Hi! I do not have much experience with the web based administration and I would like to set the Web server on my platform with WinCE4.2. I have read the documentation and I think I have all of the components in my image. After I start the [IP address]/networkadmin in my browser I type the password and I create a new user and password (I am using NTLM). I can do everything on that web page. But when I restart my platform I get prompted for the username and password again and it doesn't recognize my username and password anymore. This works with the Basic Auth, but with NTLM doesn't. What do I have to set in the registry? Does the problem lies in my Web browser settings maybe? Thanks, Jernej Tag: winCE5.0 image downloading problem Tag: 78972
  - 2
    - hungerian notation hi all, I am facing one problem, While going through the WinCE code I didn't understand many data types for example HANDLE,LP,DWORD etc there are so many in fact... Basically I have done some programming in linux environment so this field(WinCE ) is very new to me . please help me out. Thanks and regards, prasi Tag: winCE5.0 image downloading problem Tag: 78971
  - 3
    - Wavedev Audio :::::: URGENT Hi, Migrated a 4.2 wavedev and wavclick driver to 5.0. Actually, have made no changes... code compiled in PB 5.0 without any trouble. The registry settings remain the same, and have made sure that the librarires.... wavedev.dll and wavclick.dll are loading into the nk.bin. I see the messages that I have put into the wavedev.dll appear on the debug port, which leads me to believe that the wavedev.dll is being loaded and initialized. However, neither does startup sound appear nor are clicks audible! Are there any changes required in code/ registry settings for the wavedev audio/ Wavclick to work on 5.0. I have spent a lot of time, but seem to be going nowhere with this. Early help would be greatly appreciated from all the guru's. Thanx in advance. -T@N Tag: winCE5.0 image downloading problem Tag: 78970
  - 4
    - Multiple USB Device (IsochTransfer) Problem The following two device driver works fine seperately. 1) USB WWWCam (STMicro MJPEG) -> CAM_Open() / CAM_Close() -> Packet Size: 895, 8 Frames 2) USB Video Encoder (usbvision NT1004) -> VID_Open() / VID_Close() -> Packet Size: 1023, 8 Frames When I try to capture image stream from both drivers simultaneously, the second device is closed automatically, that is VID_Close() function is called. Does anybody experience same difficulty? /Gillian Kim jacoke@gmail.com Tag: winCE5.0 image downloading problem Tag: 78966
  - 5
    - How WinCE bootloader is Jumping to SDRAM after copying itself to i Hi, I have a thearotical questions. As such, my bootloader is working fine. Here my query is: The Eboot (Lubbock BSP for PXA250), copies itself from Flash to SDRAM. Then, it calculates the relative PC address of a lable it has to jump. Then, loads this address to the PC. Now, How the compiler knows that this part of the code goes to SDRAM while i am building a eboot for Flash Address ? Becoz, the compiler is generating the code for the Flash and the eboot.map file is as follows. Address Publics by Value Rva+Base Lib:Object 0001:00000000 StartUp a0001000 fwp2.obj 0001:00000020 Undefined_Handler a0001020 fwp2.obj 0001:00000024 SWI_Handler a0001024 fwp2.obj Please help me to understand. Thanks & Regards, Arockiarajesh Peter Tag: winCE5.0 image downloading problem Tag: 78963
  - 6
    - Way i can not found harddisk(I ma english is very poor ,excuse me) after wince booted ,I can not found my harddisk, (my goal device is pc) this is DEBUG: 4294769924 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: >>> Loading module atapi.dll at address 0x03CF0000-0x03D16000 (RW data at 0x01FD9000-0x01FD9608) Loaded symbols for 'C:\WINCE500\PBWORKSPACES\AA\RELDIR\CEPC_X86_DEBUG\ATAPI.DLL' 4294769880 PID:a3f99ca2 TID:63f84942 0x83fcbc90: [NOTIFY] HandleSystemEvent 7 /ADD CRD0: 4294769948 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: ATAPI DLL_PROCESS_ATTACH 4294770954 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: ATAPI:PCIConfig!DeviceConfig+(0) 4294770954 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: ATAPI:PCIConfig!ConfigRsrc+(Bus 0, Device 31, Function 2) 4294770954 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: ATAPI:PCIConfig!ConfigRsrc: BAR(0/31/2): Offset 0x10, Type I/O, Size 0x8 4294770954 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: ATAPI:PCIConfig!ConfigRsrc: BAR(0/31/2): Offset 0x14, Type I/O, Size 0x4 4294770954 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: ATAPI:PCIConfig!ConfigRsrc: BAR(0/31/2): Offset 0x18, Type I/O, Size 0x8 4294770954 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: ATAPI:PCIConfig!ConfigRsrc: BAR(0/31/2): Offset 0x1c, Type I/O, Size 0x4 4294770954 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: ATAPI:PCIConfig!ConfigRsrc: BAR(0/31/2): Offset 0x20, Type I/O, Size 0x10 4294770954 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: ATAPI:PCIConfig!ConfigRsrc- 4294770955 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: Warning: No Match template is found for following PCI Device 4294770955 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: ---------------------------------------------------------------- --------------- 4294770955 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: Bus/Device/Function = 0/31/3, Unknown Device Type 4294770955 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: VendorID = 0x8086, DeviceID = 0x24D3, Command = 0x0001, Status = 0x0280 4294770955 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: RevisionID = 0x02, ProgIf = 0x00, SubClass = 0x05, BaseClass = 0x0C 4294770955 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: CacheLineSize = 0x00, LatencyTimer = 0x00, HeaderType = 0x00, BIST = 0x00 4294770955 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: BaseAddresses: 4294770956 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000C01 0x00000000 4294770956 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: CIS = 0x00000000, SubVendorID = 0x1462, SubSystemID = 0x7280 4294770956 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: ROMBaseAddress = 0x00000000 4294770956 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: InterruptLine = 0x0B, InterruptPin = 0x02, MinGrant = 0x00, MaxLatency = 0x00 4294770960 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: ---------------------------------------------------------------- --------------- 4294770960 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: PCIBUS!PCICfgCheckBARs: WARNING: No matching registry key was found for placed device 0/31/3. 4294770960 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: PCIBUS!PCICfgCheckBARs: Problems can result if the device is being used while configuring PCIbus. 4294770961 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: Warning: No Match template is found for following PCI Device 4294770961 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: ---------------------------------------------------------------- --------------- 4294770961 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: Bus/Device/Function = 0/31/5, Audio Multimedia Device 4294770961 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: VendorID = 0x8086, DeviceID = 0x24D5, Command = 0x0007, Status = 0x0290 4294770961 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: RevisionID = 0x02, ProgIf = 0x00, SubClass = 0x01, BaseClass = 0x04 4294770962 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: CacheLineSize = 0x00, LatencyTimer = 0x00, HeaderType = 0x00, BIST = 0x00 4294770963 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: BaseAddresses: 4294770963 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: 0x0000DC01 0x0000D801 0xFEBFFA00 0xFEBFF900 0x00000000 0x00000000 4294770964 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: CIS = 0x00000000, SubVendorID = 0x1462, SubSystemID = 0x0080 4294770965 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: ROMBaseAddress = 0x00000000 4294770966 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: InterruptLine = 0x0B, InterruptPin = 0x02, MinGrant = 0x00, MaxLatency = 0x00 4294770966 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: ---------------------------------------------------------------- --------------- 4294770967 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: PCIBUS!PCICfgCheckBARs: WARNING: No matching registry key was found for placed device 0/31/5. 4294770967 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: PCIBUS!PCICfgCheckBARs: Problems can result if the device is being used while configuring PCIbus. 4294770968 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: PCIBUS!PCICfgAllocMemSpace: Failed to place Device resource: Bus 0, Device 0, Function 0 4294770969 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: PCIBUS!PCICfgAllocMemSpace: Failed to place Bridge resource: Bus 0, Device 1, Function 0 4294770970 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: PCIBUS!PCICfgAllocMemSpace: Failed to place Bridge resource: Bus 0, Device 30, Function 0 4294770970 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: PCIBUS!PCICfgAllocMemSpace: Failed to place Device resource: Bus 0, Device 29, Function 7 4294770971 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: PCIBUS!PCICfgAllocMemSpace: Failed to place Device resource: Bus 0, Device 31, Function 5 4294770972 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: PCIBUS!PCICfgAllocMemSpace: Failed to place Device resource: Bus 0, Device 31, Function 5 4294770972 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: PCIBUS!PCICfgAllocIoSpace: Failed to place Device resource: Bus 0, Device 31, Function 3 4294770973 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: ATAPI:PCIConfig!DeviceConfig+(1) 4294770974 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: ATAPI:PCIConfig!DeviceConfig+(1) 4294770974 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: ATAPI:PCIConfig!DeviceConfig+(1) 4294770975 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: ATAPI:PCIConfig!DeviceConfig+(1) 4294770976 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: ATAPI:PCIConfig!DeviceConfig+(1) 4294770976 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: ATAPI DLL_PROCESS_DETACH 4294770977 PID:a3f99ca2 TID:a3fa2d42 0x83fcb800: <<< Unloading module atapi.dll at address 0x03CF0000-0x03D16000 (RW data at 0x01FD9000-0x01FD9608) Unloaded symbols for 'C:\WINCE500\PBWORKSPACES\AA\RELDIR\CEPC_X86_DEBUG\ATAPI.DLL' how way i will be go ? thanks all! Tag: winCE5.0 image downloading problem Tag: 78961
  - 7
    - How to unload a driver ? Hi, Is there a way to unload a loaded driver without reboot? I used ActivateDeviceEx and DeactivateDevice to disable the dirver, however the driver still can be found using FindFirstFileEx and FindNextFile and be opended correctly. Tag: winCE5.0 image downloading problem Tag: 78960
  - 8
    - Why not see CF card under wince Hi I already added: "FAT FILE SYSTEM"" ATAPI PCI/IDE STORAGE BLOCK DRIVER"" COMPACT FLASH/PC CARD STORAGE[ATADISK]"" SECURE DIGITAL/MULTIMEDIA CARD[SC/MMC]" How in does Wince or do not have Hard the disk table of contents? Please helps me thanks wujun Tag: winCE5.0 image downloading problem Tag: 78959
  - 9
    - WinCE 5.0 Media File Sharing Hi, Has anybody tried accessing a media file from a WinCE server to a WinCE client? I have 2 CEPCs setup with Windows CE 5.0, BSP: CEPC x86. I have a media file (chicken.wmv) located in a WinCE server (fileserver). Media Player pops up the error message: Cannot open '\\fileserver\media\chicken.wmv'. (0x8007000e) Here are some scenarios that work fine: - WinXP client accesses remote media file (chicken.wmv). - WinCE client accesses remote documents like Word or PDF files. - WinCE client plays the media file (chicken.wmv) stored in local directory (\temp). - WinCE client accesses the remote media file via HTTP (http://fileserver/files/chicken.wmv). The error only happens when I access a media file from a remote directory in a WinCE file server to a WinCE client. I am aware that Media Player uses DirectShow. Could this be a DirectShow issue when it tries to render a remote source file? Has anyone found a solution or a workaround to this issue? Macs Tag: winCE5.0 image downloading problem Tag: 78958
  - 10
    - Yet another random FAT corruption posts - WinCE 4.1 I'm getting units back from the field with corrupt flash cards, so I've been doing some reading in the news groups for "wince corrupt" to see what I can learn. First, is a DOC (disk on chip) effectively the same thing as a compact flash card? I know they are different technology, but from WinCE's view? Okay, back to the corruption issues. Our units *may* be turned off periodically with no thought or concern as to what the unit is doing. Obviously, if I'm in the middle of a write operation, the file content may be hosed, but is it possible to lose the file system itself or a portion of some other file? We have seen three types of corruption: 1) File system: CF is no longer bootable, garbage characters in the filenames, etc. 2) Portions of executable files : Our main application file has lost two major portions. I'm still analyzing this for patterns of any sort, but the only time this file is accessed is when the system boots. 3) Corrupt nk.bin - system is on it's way back to us. Ideas or suggestions? Thanks Tag: winCE5.0 image downloading problem Tag: 78943
  - 11
    - Bug in TIPCCARD (CE 5.0)? This is a multi-part message in MIME format. ------=_NextPart_000_000A_01C6109E.D9BB8460 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable In my opinion, there is a bug in the CPCCardBusBridge::InitCardBusBridge = routine in PCC_TIPCCARD.LIB = (Public\Common\Oak\Drivers\Pccard\Tipccard\PDSOCKET.CPP): BOOL CPCCardBusBridge::InitCardBusBridge( void ) { . . DWORD dwCmd =3D ReadCfgDword( 4 ); m_dwDeviceNumber =3D dpi.dwDeviceNumber; m_dwFunctionNumber =3D dpi.dwFunctionNumber; . . WriteCfgDword( 4, dwCmd | 0x7 ); return TRUE; } The problem is that ReadCfgDword uses m_dwDeviceNumber and = m_dwFunctionNumber, which are not initialized yet, and reads a bad value = for dwCmd (hopefully 0xFFFFFFFF). Switching lines fixes the problem: m_dwDeviceNumber =3D dpi.dwDeviceNumber; m_dwFunctionNumber =3D dpi.dwFunctionNumber; =20 DWORD dwCmd =3D ReadCfgDword( 4 ); The bug seems to be quite harmless (setting more bits than needed in the = PCI Command Register), but just adds a little more confusion to this = code, which really don't need it! Remi ------=_NextPart_000_000A_01C6109E.D9BB8460 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Diso-8859-1"> <META content=3D"MSHTML 6.00.2900.2802" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY> <DIV><FONT face=3DArial size=3D2>In my opinion, there is a bug in the = <FONT=20 face=3D"Courier New">CPCCardBusBridge::InitCardBusBridge</FONT> = routine in=20 PCC_TIPCCARD.LIB=20 (Public\Common\Oak\Drivers\Pccard\Tipccard\PDSOCKET.CPP):</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3D"Courier New" size=3D2>BOOL = CPCCardBusBridge::InitCardBusBridge(=20 void )<BR>{<BR>    .</FONT></DIV> <DIV><FONT size=3D2> <DIV><FONT size=3D2><FONT face=3D"Courier New">   =20 .</FONT></FONT></DIV> <DIV></FONT><FONT face=3D"Courier New" size=3D2>    DWORD = dwCmd =3D=20 ReadCfgDword( 4 );</FONT></DIV></DIV> <DIV><FONT face=3D"Courier New" size=3D2></FONT> </DIV> <DIV><FONT size=3D2><FONT face=3D"Courier New">    = m_dwDeviceNumber =3D=20 dpi.dwDeviceNumber;<BR>    m_dwFunctionNumber =3D=20 dpi.dwFunctionNumber;<BR>    .</FONT> <DIV><FONT size=3D2> <DIV><FONT face=3D"Courier New" size=3D2>    = .</FONT></DIV> <DIV><FONT face=3D"Courier New">    WriteCfgDword( 4, = dwCmd | 0x7=20 );</FONT></DIV> <DIV><FONT face=3D"Courier New"></FONT> </DIV> <DIV><FONT face=3D"Courier New">    return=20 TRUE;<BR>}<BR></FONT></DIV></FONT></DIV></FONT></DIV> <DIV><FONT size=3D2><FONT face=3D"Courier New" size=3D2><FONT = face=3DArial>The problem=20 is that <FONT face=3D"Courier New">ReadCfgDword</FONT> = uses <FONT=20 face=3D"Courier New">m_dwDeviceNumber</FONT> and <FONT=20 face=3D"Courier New">m_dwFunctionNumber</FONT>, which are not = initialized yet, and=20 reads a bad value for <FONT face=3D"Courier = New">dwCmd</FONT></FONT><FONT=20 face=3DArial> (hopefully 0xFFFFFFFF). Switching lines fixes = the=20 problem:</FONT></FONT></FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2> <DIV><FONT face=3D"Courier New" size=3D2>    = m_dwDeviceNumber =3D=20 dpi.dwDeviceNumber;<BR>    m_dwFunctionNumber =3D=20 dpi.dwFunctionNumber;<BR><FONT face=3DArial> </FONT> <DIV><FONT face=3D"Courier New" size=3D2>    DWORD dwCmd = =3D=20 ReadCfgDword( 4 );</FONT></DIV> <DIV><FONT face=3DArial = size=3D2></FONT> </DIV></FONT></DIV></FONT></DIV> <DIV><FONT face=3DArial size=3D2>The bug seems to be quite harmless = (setting more=20 bits than needed in the PCI Command Register), but just adds a = little more=20 confusion to this code, which really don't need it!</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>Remi</FONT></DIV> <DIV><FONT size=3D2><FONT face=3D"Courier New" size=3D2><FONT=20 face=3DArial></FONT></FONT> </DIV></FONT></BODY></HTML> ------=_NextPart_000_000A_01C6109E.D9BB8460-- Tag: winCE5.0 image downloading problem Tag: 78937
  - 12
    - Editing display driver Hi, I'll be using a PXA270 to support a QVGA display (LQ057Q3DC02 by Sharp). What do I need to support this in Windows CE? I'm looking at just editing one of the built-in drivers or even just using them directly as is if possible. Thanks! Tag: winCE5.0 image downloading problem Tag: 78926
  - 13
    - How to copy the file into the "release" directory in sysgen build? Hi: The file was copied to the "release" directory by the "postlink.bat" at the project, when I build the project with build image option. But when I build the OS with build image option will not to copy the file into the release directory!!!. What I need to add into the sources file of project to copy the file into "release" directory when I want "sysgen" - clean build the OS? In the Sources file of project I added the line as: POSTLINK_PASS_CMD=postlink.bat and at postlink.bat copy the file into "release" directory. Thanks Lu Tag: winCE5.0 image downloading problem Tag: 78925
  - 14
    - what is nk.bin I am new to Platform Builder.....i want to know what is nk.bin, please if any body knows.....tell me. Tag: winCE5.0 image downloading problem Tag: 78917
  - 15
    - Graphics Device Interface Test-Polygon failed when i ran CETK Graphics Device Interface test, i got Polygon failed. Can anybody help me where i need to look into the code and what might be the problem. Tag: winCE5.0 image downloading problem Tag: 78916
  - 16
    - Adapter name shows "NULL" Hi, I am doing a USB wireless driver in WinCE 5.0.My problem is that i am not getting a proper adapter name when i do a ipconfig.Where as the description field comes as proper which is same as my instance name.where as the adapter name shows nothing. eg. Adapter Name.................: Description......................:Athusb1 Because of this am not able to call NdisDeRegisterAdapter with my instance name which shows error Adapter not found. My ndisregisteradapter returns success and works properly. I am able to unload my driver with the call NdisDeregisterAdapter(&Status, _T("")); I there any oid for this? Please help me in this regard.. Ajith Tag: winCE5.0 image downloading problem Tag: 78910
  - 17
    - modify project without re-build whole winCE image Hi, What I am doing now? -- steps : 1 .select template for "set top box" 2 . Add new "project" to it 3. add "files " to project 4. build OS image 5. download on CEPC and Run. Problem : when I want to modify "project" , I have to build whole OS image again. And taking too much time. ** If I build project separately and down load OS image on CEPC , than it wont work for me. Can some one suggest me how to modify project without rebuild OS image?? Thanks & Regrds, Jadav Bheda Tag: winCE5.0 image downloading problem Tag: 78908
  - 18
    - Is it possible to transfer data between the partitions in Flash chip. Dear Experts, We are having SAMSUNG flash chip(64MB) and we suppose want to do four partition in that. We are planning to use the MSFLASH driver. Our doubt is, Whether MSFLASH driver will support to do four partitions in SAMSUNG flash chip. After doing the partition whether it is possible to transfer data from one partition to another. Anybody having solution for the above issue please reply us. Thanks In Advance, Jalvath Tag: winCE5.0 image downloading problem Tag: 78896
  - 19
    - Audio driver Setting Query ... ? Hello All, I have some queries related to the Audio driver. I am working on a PXA270 refrence board. We have a Wolfson 9714 chip on our board. We also have got a driver for the same from Wolfson, which we have integrated in our OS configuration. Now the problem is that when the OS image gets loaded, I distinctly hear the Startup sound from the Headphones.But after the complete OS image gets loaded and when I try to play some MP3 songs or any other audio files the sound is very low ... I am not sure which setting is causing this to happen, since we are sure that the hardware is fine since I get the loud startup sound ... I most probably think that the GWES thread is configuring some different audio setting ... If anyone has encountered this kind of problem before then if he could provide any pointers as to what could be the source of problem it would be a great help ...! Regards, Swapnil. Tag: winCE5.0 image downloading problem Tag: 78895
  - 20
    - applet Can IE support applet of Java? Tag: winCE5.0 image downloading problem Tag: 78894
  - 21
    - Co-Existence with Activesync driver. Hi, I have a custom network driver which emulates an ethernet medium. My driver gets loaded and i am able to view the dll in the process viewer. Also my driver gets listed in the list of network adapters in the system. But when i connect Activesync, my driver does not get any call (All the calls are routed to the activesync driver only). and my driver vanishes from the list of network adapters. But the driver is still loaded (i confirmed it using the process viewer). What could be the issue? Has anyone else come across this earlier ?? thanks in advance for the help Tag: winCE5.0 image downloading problem Tag: 78893
  - 22
    - DMA Interrupts - Part 2 [Also refer to "DMA Interrupts" thread.] Now my shared DMA IRQ is working. I ran the test for five or six times and it never failed or crashed. It always displayed the number 4 (1024 datasize / 256 bufsize) meaning that it saw four descriptors reaching their ends. The following comment was buried deep inside my code for weeks and was never taken into cosideration anymore. /* if (!TransBusAddrToStatic( Internal, 0, PortAddress, ulIoLen, &inIoSpace, &PhysAddr)) { //return FALSE; i'm feeling lucky! } */ Please notice the my NOTE Lesson learned: "Only Google may be feeling lucky!!" I actually used BusTransBusAddrToStatic this time -- In the constructor: CreateBusAccessHandle (L"HKEY_LOCAL_MACHINE\\Drivers\\Active") (still not sure about its purpose as i don't specify a driver under Active nor it adds one to it) -- In the destructor: if (m_hBusAccess != NULL) CloseBusAccessHandle(m_hBusAccess); -- In the Hook member: BOOL bRet = BusTransBusAddrToStatic( m_hBusAccess, Internal, 0, PortAddress, // {DMA_BASE, 0} MapSize, // sizeof (DMA_REG) &inIoSpace, // 0 &KernPhysAddr // + 0xF0 is dma_reg->DINT // seen by the Kernel ); feel free to add comments... Tag: winCE5.0 image downloading problem Tag: 78888
  - 23
    - Two drivers called one common code cause system halt when sysetem I want to wrote a SSP driver.Because both the kbd driver and the battery driver would call it for transfer by SSP. So I build it in drvlib.lib and link to kbd and batt driver. Of cause,to prevent access conflict,I use MUTEX in SSP driver. All works well. But When I resume system from suspend,the system halting.... I found that when system resume,If system call some register such as SSP_REGS in SSP driver and the exception occur.The register (SSP_REGS)is defined and intialized in SSP driver. When system boot,the SSP intilize and memory alloc function would be called twice in kbd and batt driver.there is no exception occur. (I called the SSP iniilize and memory alloc function in PowerHandle function in kbd and batt driver.) It seems that it`s a memory access violation...... So, How can I do with PowerHandle function in kbd and batt driver? Thank you. Tag: winCE5.0 image downloading problem Tag: 78859
  - 24
    - USB Over current Query ... ? Hello All, I have a particular problem at this point of time ... Problem :- ------------ I have managed to get the USB Host controller working and all the client drivers are also working,i.e. Keyboard,mouse,mass storage etc ... Now I have started working on the CF-card ... but I came to a problem as soon as I inserted the CF-card ... on investigation I found that the CF-card detect pin(Configured on a GPIO) that we have on our platform goes low as soon as we insert the CF-card ... now the problem is that this GPIO takes care of the USB over current indicator pin(Mostly configured in the USB drivers) ... so as soon as I insert the CF-card the USB DLL's get un-loaded indicating the over current flag ... So now I want to remove the over current protection for the USB ... If anyone could provide any pointers in that regard it wouldbe a great help ...! Regards, Swapnil. Tag: winCE5.0 image downloading problem Tag: 78858
  - 25
    - ROM File system : IPSM Hi, I have migrated IPSM from 4.2 to 5.0. The build has no problems and on startup, the InitIPSM seems to run fine. Though, there has been one thing that has been a show stopper here: the shadowing of the root directory to \IPSM is not taking place. I got to understand that this is because I was using a RAM/ROM file system... hope my understanding is correct?? On switching to ROM file system, the bootup abruptly stops, probably due to some registry settings in InitIPSM.exe. It would be nice if any of the experienced ppl shared how they overcame this. Thanks in advance. -Tarun Tag: winCE5.0 image downloading problem Tag: 78852
- Next
  - 1
    - NDIS miniport driver and NE2000 Compact Flash Ethernet card Hi all, I'm trying to get the "real" miniport driver to work on our platform. Our XSCALE platform (WinCE 4.2) has only one Ethernet port (PCMCIA-CF card NE2000). It is based on the Lubbock platform but has as stated only one Ethernet port. Downloading and debugging is done over this port and it works fine. Also VMINI works fine (connects to internet websites, FTP works etc.). VMINI relies on KITL so it is impossible to use for product Ethernet networking. Instead we try to build the device without KITL but with NE200 Compatible Ethernet Driver. When we enable the device it detects the NE2000 card, loads the NE2000 driver and can read the MAC adress. But it gets no IP-adress (we use dhcp). AutomaticIP is enabled in the device so after about 10 seconds we get a "faked" IP address in the range 169.254.xxx.xxx. Trying to Ping this IP adress from a PC is of course not successfull. Trying to ping from our device to a PC on the network is also unsuccessfull. Ping own IP adress from device seems OK. As we only have one port it is not possible to do any effective debugging. But it seems that hardware is OK- VMINI works on it. I have tried to find some registry setting that solves the problem, but no luck so far. Any one got a clue, Thanks Igge Tag: winCE5.0 image downloading problem Tag: 78848
  - 2
    - expend the S3C2410 sdram from 64M to 128MB This is a multi-part message in MIME format. ------=_NextPart_000_005D_01C60D6C.3222FA60 Content-Type: text/plain; charset="gb2312" Content-Transfer-Encoding: quoted-printable I want to expend my S3C2410 device SDRAM from 64MB to 128MB(two = chip),before sdram is hy57V561620BT-H(32MB*2) , now I will use the = K4S511632B(64MB*2). the platform is AXD+Multi-ICE. the change of hardware : -------------------------------------------------------------------------= ---- (change before) CPU SDRAM | CPU SDRAM (after = change) laddr[24] BA0 | laddr[26] BA0 laddr[25] BA1 | laddr[25] BA1 change of the software: ;=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D ; NAME: OPTION.A ;;Start address of each stacks, ;_STACK_BASEADDRESS EQU 0x33ff8000 =20 ;_MMUTT_STARTADDRESS EQU 0x33ff8000 =20 ;_ISR_STARTADDRESS EQU 0x33ffff00 _STACK_BASEADDRESS EQU 0x37ff8000 =20 _MMUTT_STARTADDRESS EQU 0x37ff8000 =20 _ISR_STARTADDRESS EQU 0x37ffff00 +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D furthermore, the following in the memcfg.s is correct.=20 ;Bank 6 parameter B6_MT EQU 0x3 ;SDRAM ;B6_Trcd EQU 0x0 ;2clk B6_Trcd EQU 0x1 ;3clk B6_SCAN EQU 0x1 ;9bit =20 and the =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D SMRDATA DATA ; Memory configuration should be optimized for best performance=20 ; The following parameter is not optimized. =20 ; Memory access cycle parameter strategy ; 1) The memory settings is safe parameters even at HCLK=3D75Mhz. ; 2) SDRAM refresh period is for HCLK=3D75Mhz.=20 DCD = (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSC= ON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28)) DCD = ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Ta= cp<<2)+(B0_PMC)) ;GCS0 DCD = ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Ta= cp<<2)+(B1_PMC)) ;GCS1=20 DCD = ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Ta= cp<<2)+(B2_PMC)) ;GCS2 DCD = ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Ta= cp<<2)+(B3_PMC)) ;GCS3 DCD = ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Ta= cp<<2)+(B4_PMC)) ;GCS4 DCD = ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Ta= cp<<2)+(B5_PMC)) ;GCS5 DCD ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) ;GCS6 DCD ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) ;GCS7 DCD = ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) =20 DCD 0x32 ;SCLK power saving mode, BANKSIZE 128M/128M DCD 0x30 ;MRSR6 CL=3D3clk DCD 0x30 ;MRSR7 ; DCD 0x20 ;MRSR6 CL=3D2clk ; DCD 0x20 ;MRSR7 =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =20 after I changed all things. my device is loop at=20 bic r0,r0,#MODEMASK|NOINT orr r1,r0,#SVCMODE msr cpsr_cxsf,r1 ;SVCMode ldr sp,=3DSVCStack =20 ------------------------------ and I had test the 64M config under the 128M chip using, it's running = okay, but the 64MB space is wasted . when I expand to 128M, but I faild. = thanks for you Help . ------=_NextPart_000_005D_01C60D6C.3222FA60 Content-Type: text/html; charset="gb2312" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; charset=3Dgb2312"> <META content=3D"MSHTML 6.00.2900.2802" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY> <DIV><FONT size=3D2>I want to expend my S3C2410 device SDRAM from 64MB = to=20 128MB(two chip),before sdram is hy57V561620BT-H(32MB*2) , now I will use = the=20 K4S511632B(64MB*2). the platform is  AXD+Multi-ICE.</FONT></DIV> <DIV><FONT size=3D2></FONT> </DIV> <DIV><FONT size=3D2><FONT color=3D#ff0000>the change of hardware</FONT>=20 :</FONT></DIV> <DIV><FONT=20 size=3D2>----------------------------------------------------------------= -------------</FONT></DIV> <DIV><FONT size=3D2>(change before)=20 CPU           &nbs= p;=20  SDRAM   |  =20 CPU          SDRAM (after=20 change)</FONT></DIV> <DIV><FONT=20 size=3D2>          &nbs= p;   =20  laddr[24]       =20 BA0     |  =  laddr[26]    =20 BA0</FONT></DIV> <DIV><FONT=20 size=3D2>          &nbs= p;     laddr[25]     &n= bsp; =20 BA1     |   laddr[25]   =20 BA1</FONT></DIV> <DIV><FONT size=3D2></FONT> </DIV> <DIV><FONT size=3D2></FONT> </DIV> <DIV><FONT size=3D2> <FONT color=3D#ff0000>change of the=20 software:</FONT></FONT></DIV> <DIV><FONT = size=3D2>;=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D<BR>; = NAME:=20 OPTION.A<BR>;;Start address of each = stacks,<BR>;_STACK_BASEADDRESS EQU=20 0x33ff8000  <BR>;_MMUTT_STARTADDRESS EQU 0x33ff8000 =20 <BR>;_ISR_STARTADDRESS EQU 0x33ffff00</FONT></DIV> <DIV><FONT size=3D2></FONT> </DIV> <DIV><FONT size=3D2>_STACK_BASEADDRESS EQU 0x37ff8000 =20 <BR>_MMUTT_STARTADDRESS EQU 0x37ff8000  = <BR>_ISR_STARTADDRESS EQU=20 0x37ffff00</FONT></DIV> <DIV><FONT = size=3D2>+=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D</FONT>= </DIV> <DIV><FONT size=3D2>furthermore, the following in the   <FONT=20 color=3D#ff0000>memcfg.s</FONT>  is correct. </FONT></DIV> <DIV><FONT size=3D2></FONT> </DIV> <DIV><FONT size=3D2>;Bank 6=20 parameter<BR>B6_MT  EQU 0x3 ;SDRAM<BR>;B6_Trcd &= nbsp;EQU 0x0 ;2clk<BR>B6_Trcd  EQU 0x1 ;3cl= k<BR>B6_SCAN  EQU 0x1 ;9bit<BR> </FONT></DIV> <DIV><FONT size=3D2>and the</FONT></DIV> <DIV><FONT=20 size=3D2>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D</FONT></DIV> <DIV><FONT size=3D2><FONT color=3D#804040>SMRDATA DATA</FONT><BR>; = Memory=20 configuration should be optimized for best performance <BR>; The = following=20 parameter is not=20 optimized.          &nb= sp;         =20 <BR>; Memory access cycle parameter strategy<BR>; 1) The memory settings = is  safe parameters even at HCLK=3D75Mhz.<BR>; 2) SDRAM refresh = period is for=20 HCLK=3D75Mhz. </FONT></DIV> <DIV><FONT size=3D2></FONT> </DIV> <DIV><FONT size=3D2>        DCD=20 (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BW= SCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON&lt= ;<28))<BR>   =20  DCD=20 ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<&= lt;6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC))  =20 ;GCS0<BR>     DCD=20 ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<&= lt;6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC))  =20 ;GCS1 <BR>     DCD=20 ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<&= lt;6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC))  =20 ;GCS2<BR>     DCD=20 ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<&= lt;6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC))  =20 ;GCS3<BR>     DCD=20 ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<&= lt;6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC))  =20 ;GCS4<BR>     DCD=20 ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<&= lt;6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC))  =20 ;GCS5<BR>     DCD=20 ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN))   =20 ;GCS6<BR>     DCD=20 ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN))   =20 ;GCS7<BR>     DCD=20 ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tc= hr<<16)+REFCNT)   =20 </FONT></DIV> <DIV><FONT size=3D2></FONT> </DIV> <DIV><FONT size=3D2> <FONT color=3D#ff0000>DCD=20 0x32            = ;SCLK=20 power saving mode, BANKSIZE 128M/128M</FONT></FONT></DIV> <DIV><FONT size=3D2></FONT> </DIV> <DIV><FONT size=3D2>     DCD=20 0x30            = ;MRSR6=20 CL=3D3clk<BR>     DCD=20 0x30           =20 ;MRSR7<BR>;     DCD=20 0x20            = ;MRSR6=20 CL=3D2clk<BR>;     DCD=20 0x20           =20 ;MRSR7</FONT></DIV> <DIV><FONT=20 size=3D2>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D</FONT></DIV> <DIV><FONT size=3D2> </FONT></DIV> <DIV><FONT size=3D2></FONT> </DIV> <DIV><FONT size=3D2>after I changed all things.  my device is loop = at=20 </FONT></DIV> <DIV><FONT size=3D2></FONT> </DIV> <DIV><FONT size=3D2><FONT=20 color=3D#804040> bic r0,r0,#MODEMASK|NOINT<BR> orr r1= ,r0,#SVCMODE<BR> msr cpsr_cxsf,r1  ;SVCMode<BR> = ldr sp,=3DSVCStack</FONT><BR> </FONT></DIV> <DIV><FONT size=3D2>------------------------------</FONT></DIV> <DIV><FONT size=3D2>and I had test the 64M config under the  128M = chip using,=20 it's running okay, but the 64MB space is wasted . when I expand to 128M, = but I=20 faild. </FONT></DIV> <DIV><FONT size=3D2></FONT> </DIV> <DIV><FONT size=3D2>thanks for you Help  .  = </FONT></DIV></BODY></HTML> ------=_NextPart_000_005D_01C60D6C.3222FA60-- Tag: winCE5.0 image downloading problem Tag: 78847
  - 3
    - OEMLoadInit/OEMLoadModule & eVC 4.0 I have a device that is running Windows CE 4.2 with the certification module (OEMLoadInit/OEMLoadModule)enabled. There are different sets of public/private keys. I have signed the .exe and .dll files used by the Remote Tools (process viewer, registry editor, etc.) with a "trust" key and they work, but when I try to debug my application (which is also signed) then I receive error 80004005 from eVC. Is it possible to *debug* an application with eVC 4.0 on such device? If not then I have to find another solution. Any help greatly appreciated. Tag: winCE5.0 image downloading problem Tag: 78844
  - 4
    - Hive files Hi, I need to list all entries from a hive file. Using rgucomp.exe I can do so but chinese carachters are not translated. rgucomp.exe: Microsoft (R) RGUComp Version 1.0.000 Registry file processor and hive builder. Is there a newer version that works with unicode or is it posible to get the arguments for the cereg400.dll exports (to make my own)? Tag: winCE5.0 image downloading problem Tag: 78841
  - 5
    - Is it impossible to see the uncached memory with Platform Builder? I know that 0x80000000 - 0x9FFFFFFF is cached area and 0xA0000000 - 0xBFFFFFFF is uncached area. When I debug an ARM board with Platform Builder, I can see the cached area with View->Debug Windows -> Memory 1 (or 2). But when I try to see the uncached area with it, I've got an data abort error in debug console and just '??' on the Memory Viewer. Is It impossible to see the uncached memory with platform Builder's Memory Debug Window? Tag: winCE5.0 image downloading problem Tag: 78840
  - 6
    - The difference of startup.s I have one question on startup.s I have ARM cored board. (ARM 922T). Generally, you can find three startup.s for a ARM based board. For example, In case of Samsung 2410x board, you can find one startup.s in 'eboot' directory of 2410x BSP. another is in 'oal' of 2410x BSP. The other is in \Platform\Common\SRC\ARM\Samsung\S3c2410x\Startup I know the first 'startup.s' is for bootloader. But, now, I wonder what the difference between the second and the third is. And What should I do for XIP (excute in Place)? Tag: winCE5.0 image downloading problem Tag: 78838
  - 7
    - CeGetVolumeInfo() prototype incorrect in storemgr.h I think I have all the latest CE 5.0 updates installed, but I seem to be having the same issue reported earlier in this thread back in February 2005: http://groups.google.com/group/microsoft.public.windowsce.platbuilder/browse_thread/thread/2637189935d939c9/705cac02b72948bb?lnk=st&q=cegetvolumeinfo&rnum=1&hl=en#705cac02b72948bb The header defines a "wide" version of CeGetVolumeInfoW(), but coredll.lib only has CeGetVolumeInfo(). Also, as mentioned in the thread, the API seems to require an extern "C" to compile. Is there a CE 5.0 update with an official "fixed" storemgr.h? Or is there some other way to work around the issue? Thanks! David Holcomb Tag: winCE5.0 image downloading problem Tag: 78836
  - 8
    - USB Keyboard Notification Dear Greats, We are writting one application that should detect the presence of USB keyboard and change its GUI accordingly. My application is an MFC Dialog based application. OS is Windows CE 5.0 with USBHID support. I tried to capture the WM_DEVICECHANGE notification message from my application. If I connect / remove this message is not received by my application. I saw some Notification registration for USB device attach/detach. Will this work for the keyboard as well. My other idea is, we can broadcast a attach message in the USB driver Init and broadcast a detach message in the USB driver DeInit. Greats, kindly advice me on what approach can I proceed. avkumar Tag: winCE5.0 image downloading problem Tag: 78834
  - 9
    - RTC problem? Time change not regular. Hi all. On my device( wince4.2 ) there is RTC. The OEMGetRealTime(), OEMSetRealTime(),OEMSetAlarmTime() have been implemented using the RTC hardware. The problem is, on the control panel's date/time property. I observe the second time beat is not regular. What 's function this panel's date/time call? How do it to change the time? It is relate to the CurMSec. Because I wonder there some problem in the system timer setting. thanks in advance. Tag: winCE5.0 image downloading problem Tag: 78833
  - 10
    - Why nobody answer my question about exception 004 MIPS platform? Is it because I did not provide enough information or someghing else? Please give some suggestion. Thanks you very much. Tag: winCE5.0 image downloading problem Tag: 78830
  - 11
    - system timer, dwReschedTime problem? I have some question on the system timer. 1.The global scheduling variables, dwReschedTime in PB4.2. Is the kenel set the dwReschedTime value and keep it change by the thread scheduling algorithm ? For I cannot find in serval impelement OAL sample ? 2. The system timer's interupt period time, If in the OAL it is not set by one milisecond and other value such as 10 ms, what's the effect? Tag: winCE5.0 image downloading problem Tag: 78829
  - 12
    - CE 4.2 build fails after installing QFE updates I'm having problems building an image after installing the 4.2 QFE updates. This happens on both the evaluation and the full version which I recently purchased. If no updates are installed, the image builds fine. This is the output in build.txt: C:\WINCE420\PUBLIC\Samsung\WINCE420\smdk2410\cesysgen\sdk\lib\ARMV4\retail\coredll.lib C:\WINCE420\public\common\sdk\lib\ARMV4\retail\corelibc.lib C:\WINCE420\public\common\sdk\lib\ARMV4\retail\corelibc.lib C:\WINCE420\PUBLIC\Samsung\WINCE420\smdk2410\cesysgen\oak\lib\ARMV4\retail\fsdmgr.exp fsdmgr_ALL.lib(fsdserv.obj) : error LNK2001: unresolved external symbol dlVOLList fsdmgr_ALL.lib(fsdapis.obj) : error LNK2001: unresolved external symbol dlVOLList C:\WINCE420\PUBLIC\Samsung\WINCE420\smdk2410\cesysgen\oak\target\ARMV4\retail\fsdmgr.dll : fatal error LNK1120: 1 unresolved externals NMAKE : fatal error U1077: 'link' : return code '0x460' Stop. NMAKE : fatal error U1077: 'C:\WINCE420\sdk\bin\i386\nmake.exe' : return code '0x2' Stop. NMAKE : fatal error U1077: 'C:\WINCE420\sdk\bin\i386\nmake.exe' : return code '0x2' The host pc OS is XP Pro with service pack 2. The processor is an Intel Pentium D. Any ideas what could cause this problem? I'm going to try installing on my old PC to see if I still have this problem. Any help would be appreciated. Thanks, Tony Tag: winCE5.0 image downloading problem Tag: 78826
  - 13
    - Output file name / location? I'm trying to figure out how PB projects choose where the output files go and are named. For example if I create my own project named TEST it outputs as TEST.exe. Fine... but I'm using the Emulator and it uses ddi.dll as its display driver. The source code for that (from what I understand) comes from the vgaflat project located in PLATFORM/EMULATOR/src/drivers/display. How does the vgaflat project goes from that to outputting ddi.dll? Where are the bib files for vgaflat? Also... what are the differences between the projects under PLATFORM and public/common...? It seems like there is duplicate projects? Thanks! Tag: winCE5.0 image downloading problem Tag: 78822
  - 14
    - Newbie getting networking going Hi. I've got an x86 (i.e an old pc) booting into CE 5.0 with an os image that I boot from the hard-drive. All seems good. However I can't get any networking going. I've tried putting in a range of different ne2000 pci network cards but the card does not show up, in the list of adapters in the control panel. Im sure its something obvious, but would apreciate if anyone has any advice on how to get networking up and running. Thanks RIchard Tag: winCE5.0 image downloading problem Tag: 78819
  - 15
    - Sysgen errors (Fiber API ?) I did have a perfectly working PB platform to which I added various things from the Catalog, now when I Sysgen it I get errors (see below a snippet from build.log). It seems to be requiring the Fibre API which I also added from the catalog. What am I missing? 0 Please add _COMMONPUBROOT and __PROJROOT to your tree's cesysgen\sources file. Directory: C:\WINCE500\PUBLIC\COMMON\CESYSGEN TARGETNAME: coredll_ALL makefile.def: Including C:\WINCE500\public\common\oak\misc\sources.ReleaseType_OAK 'C:\WINCE500\PBWorkspaces\VRM270Thin\WINCE500\VRM270_ARMV4I\cesysgen\oak\lib\ARMV4I\debug\coredll_ALL.lib' is up-to-date cefilter C:\WINCE500\public\common\oak\lib\ARMV4I\debug\coredll.def C:\WINCE500\PBWorkspaces\VRM270Thin\WINCE500\VRM270_ARMV4I\cesysgen\oak\lib\ARMV4I\debug Cefilter for Windows CE (Release) (Built on May 11 2004 16:51:41) nmake /NOLOGO C:\WINCE500\PBWorkspaces\VRM270Thin\WINCE500\VRM270_ARMV4I\cesysgen\oak\target\ARMV4I\debug\coredll.dll makefile.def: Invoked with predefined settings: TARGETNAME: coredll TARGETTYPE: DYNLINK RELEASETYPE: SDK TARGETLIBS: C:\WINCE500\public\common\oak\lib\ARMV4I\debug\corestub.lib C:\WINCE500\PBWorkspaces\VRM270Thin\WINCE500\VRM270_ARMV4I\cesysgen\oak\target\ARMV4I\debug\0409\coredll.res C:\WINCE500\public\common\sdk\lib\ARMV4I\debug\corelibc.lib SOURCELIBS: C:\WINCE500\PBWorkspaces\VRM270Thin\WINCE500\VRM270_ARMV4I\cesysgen\oak\lib\ARMV4I\debug\coredll_ALL.lib DEFFILE: C:\WINCE500\PBWorkspaces\VRM270Thin\WINCE500\VRM270_ARMV4I\cesysgen\oak\lib\ARMV4I\debug\coredll.def DLLENTRY: CoreDllInit makefile.def: BUILDROOT is C:\WINCE500\public\common\cesysgen 0 Please add _COMMONPUBROOT and __PROJROOT to your tree's cesysgen\sources file. Directory: C:\WINCE500\PUBLIC\COMMON\CESYSGEN TARGETNAME: coredll makefile.def: Including C:\WINCE500\public\common\oak\misc\sources.ReleaseType_SDK BUILD_MARKER:LINK_DLL_START Linking C:\WINCE500\PBWorkspaces\VRM270Thin\WINCE500\VRM270_ARMV4I\cesysgen\sdk\lib\ARMV4I\debug\coredll.lib link -lib -out:C:\WINCE500\PBWorkspaces\VRM270Thin\WINCE500\VRM270_ARMV4I\cesysgen\sdk\lib\ARMV4I\debug\coredll.lib -def:C:\WINCE500\PBWorkspaces\VRM270Thin\WINCE500\VRM270_ARMV4I\cesysgen\oak\lib\ARMV4I\debug\coredll.def -machine:thumb @C:\DOCUME~1\Martin\LOCALS~1\Temp\nm8B9.tmpMicrosoft (R) Library Manager Version 7.10.4017Copyright (C) Microsoft Corporation. All rights reserved.-nodefaultlib-ignore:4001-subsystem:windowsce,5.00C:\WINCE500\PBWorkspaces\VRM270Thin\WINCE500\VRM270_ARMV4I\cesysgen\oak\lib\ARMV4I\debug\coredll_ALL.libcoredll.def : error LNK2001: unresolved external symbol ConvertThreadToFibercoredll.def : error LNK2001: unresolved external symbol CreateFibercoredll.def : error LNK2001: unresolved external symbol DeleteFibercoredll.def : error LNK2001: unresolved external symbol GetCurrentFibercoredll.def : error LNK2001: unresolved external symbol GetFiberDatacoredll.def : error LNK2001: unresolved external symbol SwitchToFiberC:\WINCE500\PBWorkspaces\VRM270Thin\WINCE500\VRM270_ARMV4I\cesysgen\sdk\lib\ARMV4I\debug\coredll.lib : fatal error LNK1120: 6 unresolved externalsNMAKE : fatal error U1077: 'link' : return code '0x460'Stop.NMAKE : fatal error U1077: 'C:\WINCE500\sdk\bin\i386\nmake.exe' : returncode '0x2'Stop.NMAKE : fatal error U1077: 'C:\WINCE500\sdk\bin\i386\nmake.exe' : returncode '0x2'Stop. Tag: winCE5.0 image downloading problem Tag: 78818
  - 16
    - DMA Interrupts Has anyone already programmed DMA Interrupts on PXA270? It's been a while since I started doing that. I could easily transfer data In or Out, With or Without the use of descriptors, but when i wanted to enable some interrupt (I am mostly interested in DCSR_ENDINTR) the system crashed at some point. The following steps summarize the test procedure i use: 1) Allocate N descriptors and buffers 2) Set up the Descriptors 3) Start the transfer 4) Poll a global variable until the IST flags it or until the loop times out. 5) Stop the transfer (it hopefully should be over anyway) 6) Deallocate everything The IST simply counts the times and ENDINTR is fired. Now if i don't enable the IRQs (and poll the STOPINTR flag instead) everything works fine. BUT! most of the time when i enable some IRQ the system crashes. I tried BTUART and SPI. BTUART really can't help itself but on rare occasions, SPI succeeded every now and then when it felt like it, instead. It all seems so aleatory. Besides, when a DMA IRQ is enabled the OS crashes even when i don't set up an IST. So i guess it doesn't depend on the IST (unless DMA needs the IST to reset the IRQ in any case) Have any clue? Tag: winCE5.0 image downloading problem Tag: 78815
  - 17
    - WZC reporting RSSI incorrectly on Windows CE 5? All of the commercial devices we have sitting around are still Windows Mobile 2003 (or earlier), so I can't immediately verify this outside of our own WinCE 5 platform on our own hardware -- is anyone else using CE 5 and any 802.11 radio, and able to look at the RSSI as reported by the WZC api? With multiple different vendors' radios/drivers, I'm seeing the RSSI reported for any given access point apparently not getting updated. Even looking at the output of 'wzctool -q', the RSSI never changes from the initial value reported, as I move from right on top of the AP to completely out to the edge of its cell. It's "stuck". :( Can anyone confirm/refute this? It _looks_ like a bug in the WZC service or api (I don't believe it's a driver issue, as I'm (almost) positive this worked right under WinCE4.2 with those same radios/drivers)... Thanks, - Brian -- Brian Bender Vocollect, Inc. Pittsburgh, PA, USA [Apologies for the following "disclaimer" -- it's corporate policy.] -CONFIDENTIAL, PRIVILEGED COMMUNICATION- This e-mail transmission is private and intended for the addressee(s) only. It may contain information that is privileged and/or confidential. If you have received this transmission in error, you are not authorized to read, copy, disclose or disseminate it in any manner. If you have received it in error, please delete it and all copies (including backup copies) that have been made, and transmit a reply message informing the sender that it was misdirected. Tag: winCE5.0 image downloading problem Tag: 78812
  - 18
    - TFAT issue Hi , I am trying to use TFAT for my Pesistent-Store partition in my NOR flash. I have used following registry settings. [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MSFlash_NORFMD\FATFS] "FormatTfat"=dword:1 "CheckForFormat"=dword:1 "Flags"=dword:14 [ FATFS_ENABLE_BACKUP_FAT | FATFS_DISABLE_AUTOSCAN] but this doesn't seem to work, It looks like "FormatTfat" value is not having any effect. So to force TFAT format on my Persistent Store as suggested by microsoft document I have modified my registry settings as given below (Just added FATFS_FORCE_TFAT) . [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MSFlash_NORFMD\FATFS] "FormatTfat"=dword:0 "CheckForFormat"=dword:1 "Flags"=dword:400014 [FATFS_FORCE_TFAT | FATFS_ENABLE_BACKUP_FAT |FATFS_DISABLE_AUTOSCAN] But these settings are causing the device to hang. Do you know why these settings are not working ? Can you tell me any other method to force TFAT for Persistent store ? Thanks in advance for the help. Regards, ~Mike Tag: winCE5.0 image downloading problem Tag: 78800
  - 19
    - How to call Assembly code from C program Hi All, I have created a new project where i have to call some of Assembly functions (Instructions x86 processor related) please note that the assembly file is a separate .asm file and i dont want to use inline assembly program in my C code. I want to know that how can i link my .asm file with my C program code under Win CE Platform builder environment. I also want to know how i can access variables defined in C code in assembly program and is it possible to call C functions with in .asm file? Regards Roshan Tag: winCE5.0 image downloading problem Tag: 78799
  - 20
    - ActiveSync + WM5 Hi, I am trying to convince WIndows Mobile 5 to use USB Serial Function driver. The best I could get is Guest connection. It does not give me an option to create a partnership at all. The registry settings I have for this works fine on Windows CE 4.2, 5.0 & WM2003 but does not want to properly work under WIndows Mobile 5. Here are my registry settings: [-HKEY_LOCAL_MACHINE\Drivers\USB] [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\USB] "Dll"="sa_usb_ser.Dll" "Irq"=dword:0 ; 11 - "IoLen"=dword:1000 ; UDC Register space 0x1000 (4K) "Tsp"="Unimodem.dll" "DeviceArrayIndex"=dword:0 "Prefix"="COM" "Order"=dword:12 "DeviceType"=dword:0 ; "FriendlyName"=LOC_FRIENDLYNAME_USB "FriendlyName"="USB Cable:" ; Eliminate flow control bit "DevConfig"=hex: 10,00,00,00,05,00,00,00,00,01,00,00,00,4B,00,00,00,00,08,00,00,00,00,00,00 [HKEY_LOCAL_MACHINE\Comm\SAUSB] ; "DisplayName"=LOC_DISPLAYNAME_SAUSB "DisplayName"="ISP1362 USB Function Driver" "Group"="Serial" "ImagePath"="sa_usb_ser.dll" [HKEY_LOCAL_MACHINE\Comm\SAUSB\Linkage] "Route"=multi_sz:"SAUSB1" [HKEY_LOCAL_MACHINE\Comm\SAUSB1] [HKEY_LOCAL_MACHINE\Comm\SAUSB1\Parms] [HKEY_LOCAL_MACHINE\Comm\USB] [HKEY_LOCAL_MACHINE\Comm\USB\Linkage] "Bind"=multi_sz:"SAUSB1" [HKEY_LOCAL_MACHINE\Comm\USB Cable:] [HKEY_LOCAL_MACHINE\Comm\USB Cable:\Parms] [HKEY_LOCAL_MACHINE\Comm\USB Cable:\Parms\TcpIp] "DNS"=multi_sz:"127.0.0.1" "DefaultGateway"=multi_sz:"192.168.55.100" "Subnetmask"=multi_sz:"255.255.255.0" "IpAddress"=multi_sz:"192.168.55.101" "DontAddDefaultGateway"=dword:00000000 "UseZeroBroadcast"=dword:00000000 "EnableDHCP"=dword:00000000 ;Connectoids [HKEY_LOCAL_MACHINE\Comm\DefaultConnections] IF BSP_NOUSBSER ! "`USB Default"=multi_sz:"USB Cable:","115200" ENDIF "`19200 Default"=multi_sz:"Serial Cable on COM1:","19200" "`38400 Default"=multi_sz:"Serial Cable on COM1:","38400" "`Infrared Port"=multi_sz:"Infrared Port","115200" "`115200 Default"=multi_sz:"Serial Cable on COM1:","115200" "`57600 Default"=multi_sz:"Serial Cable on COM1:","57600" ;Default Connectoid [HKEY_CURRENT_USER\ControlPanel\Comm] IF BSP_NOUSBSER ! "Cnct"="`USB Default" ELSE "Cnct"="`Com1 @ 115200`" ENDIF "AutoCnct"=dword:1 IF BSP_NOUSBSER ! ************************************************************************************************ It seems that WIndows Mobile 5 uses different registry settings and defaults to RNDIS. But I delete those registry by this: [-HKEY_LOCAL_MACHINE\Drivers\USB] and try to use my old driver the way it works in CE4.2, CE5.0 & WM2003. It does not work. Any suggestions? Thank you in advance. PK Tag: winCE5.0 image downloading problem Tag: 78798
  - 21
    - how to install the second audio driver? I have built the x86 platform of WinCE 4.2 with default Ensoniq 1371 audio driver. I can put 2 kind of audio driver when I build x86 platform, but it is not my requirement. If I want to install another audio driver on run-time (Ensoniq 1371 has been exist), how can I do? Thanks! Nelson Tag: winCE5.0 image downloading problem Tag: 78797
  - 22
    - Test mail Merry Chritmas n happy new year to everybody.. ~Mike Tag: winCE5.0 image downloading problem Tag: 78796
  - 23
    - Network data corruption problem ! Hi all, I have written a socket application like echo server to test my NDIS miniport driver. I have TCP client runs on Windows XP and echo server running on WinCE. TCP client application continuously sends some known pattern. On echo server, I compare this pattern with expected pattern. It ran for 30 min - 1hr, and after that I see some data corruption in received data. Strangely it is some 4 bytes chunks in 4-5 places in the entire packet (1460 packet data size). I have debugged my NDIS miniport driver, but the data in my driver buffer is correct!!! I have used "NdisMIndicateReceivePacket" call to indicate the reception of data to NDIS. And in my "MiniportReturnPacket" function I reuse the packets as suggested in documentations. I wounder if anybody have experienced this problem... Any body has any clue on what is happening here ? One more doubt, I use my local buffer in my echo server application for "recvfrom" call. Do the TCPIP stack directly use this buffer to copy the data from my miniport driver buffer or is it uses some temporary buffer to do this copy operation? Thanks in advance, Raghav Tag: winCE5.0 image downloading problem Tag: 78794
  - 24
    - JTAG Debugger for Windows CE Hi all, We are starting a new platform development. We are planning to use WinCE 5.0, and we will like to know what is the most recommended JTAG probe for real hardware debugging via the microprocessor JTAG interface. We Know the ARM Multi-ICE and the EPI Majic probe, and they say they are compatible with the Platform Builder. Do you know what is the best option for debugging a new implementation? Do you know any other manufacturer of JTAG probes? Do you think it is OK to use only the kernel debug option ( intrusive debug via WInCE kernel options )? Thanks a lot for your help. Best regards. Jose Manuel. Tag: winCE5.0 image downloading problem Tag: 78785
  - 25
    - Do Windows ce can support K9F (K9F1G08U0M nand flash) ?thanks! Hi all! I have a big trouble about K9F flash use in wince , Can you tell me if windows ce can support K9F flash? how to find the proper driver for it ? I can't find it . thanks! K9F reference : http://www.samsung.com/Products/Semiconductor/Flash/NAND/1Gbit/K9F1G08U0M/K9F1G08U0M.htm thanks! calvin Tag: winCE5.0 image downloading problem Tag: 78784

After doing the following process i am facing some problem plz help me,
1->First i make an winCE5.0 image of USB transport support.
2->Image create successfully with 0 error
3->Now i want to download the image to a NAND Flash.

Making communication as "ethernet" and transport as "USB" i am able to
download my image to board.

But the problem is on the board it is displaying only the white screen
nothing else are displaying on the board.Plz if anybody know about this
problem ,kndly help me.

Regards
Manoranjan

Top

Re: winCE5.0 image downloading problem by mobilevil

mobilevil
Wed Jan 04 04:44:16 CST 2006

hay you didn't tell me anything about your board? where is it coming from?
which cpu? which BSP??

"manoo" <manoomaina@gmail.com> wrote in message
news:1136369337.157159.52110@g49g2000cwa.googlegroups.com...
> After doing the following process i am facing some problem plz help me,
> 1->First i make an winCE5.0 image of USB transport support.
> 2->Image create successfully with 0 error
> 3->Now i want to download the image to a NAND Flash.
>
> Making communication as "ethernet" and transport as "USB" i am able to
> download my image to board.
>
>
> But the problem is on the board it is displaying only the white screen
> nothing else are displaying on the board.Plz if anybody know about this
> problem ,kndly help me.
>
> Regards
> Manoranjan
>

Top