where is FAL(flash abstraction layer) sourec code

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - socket question: how to use sendto and recvfrom based on the same multicast address I'm building a multicast UDP program which need to send data to one multicast address and receive other data from others on the samd multicast address. I always find that I can't send and receive at the same time. The following is my test code. First, create a socket for receiving, set SO_REUSEADDR, bind it, add multicast membership and then receive data from recvfrom. This works find. Then I create a socket for sending, set SO_REUSEADDR, bind it and use sendto to send data. This failed and the error message is 10047 WSAEAFNOSUPPORT, I don't what I can do. What's the problem? How can I send and receive data while binding to one multicast address? Need your help, Thanks! -------------------------------------------------------------------- #include <winsock2.h> #include <winsock.h> #include <stdio.h> #include <windows.h> #include <ws2tcpip.h > #include <stdlib.h> #define DESTCAST "233.0.0.3" #define DESTPORT 5150 int WINAPI WinMain ( HINSTANCE hInstance, // Handle to the current instance HINSTANCE hPrevInstance,// Handle to the previous instance LPTSTR lpCmdLine, // Pointer to the command line int nCmdShow) { char szMessage[30]="hahahaa\n"; int sockrcv,socksnd; struct sockaddr_in local_sin,dest_sin,recv_sin; WSADATA wsd; int reuseaddress; struct ip_mreq mreq; int iRecvLen; /* Init WinSock2.2 */ if(0!=WSAStartup( WINSOCK_VERSION,&wsd)) { printf("WSAStartup() failed!\n"); return 0; } /* Create socket of DGRAM type, and reconfig it in miniport driver */ if((sockrcv=socket (AF_INET, SOCK_DGRAM, 0)) == INVALID_SOCKET) { printf("socket failed with:%d\n",WSAGetLastError()); WSACleanup(); return 0; } reuseaddress = 1; if(setsockopt(sockrcv, SOL_SOCKET, SO_REUSEADDR, (char FAR *)&reuseaddress, sizeof (reuseaddress)) == SOCKET_ERROR) { printf("setsockopt SO_REUSEADDR failed:%d\n",WSAGetLastError()); closesocket(sockrcv); WSACleanup(); return 0; } /*We have to bind in CE*/ local_sin.sin_family = AF_INET; local_sin.sin_port = htons(DESTPORT); local_sin.sin_addr.s_addr = htonl (INADDR_ANY); if (bind (sockrcv, (struct sockaddr FAR *) &local_sin, sizeof (local_sin)) == SOCKET_ERROR) { printf("bind failed:%d\n",WSAGetLastError()); closesocket (sockrcv); return FALSE; } mreq.imr_interface.s_addr=INADDR_ANY; mreq.imr_multiaddr.s_addr=inet_addr(DESTCAST);//??? if (setsockopt (sockrcv, IPPROTO_IP, IP_ADD_MEMBERSHIP, (char FAR *)&mreq, sizeof (mreq)) == SOCKET_ERROR) { printf("setsockopt IP_ADD_MEMBERSHIP failed:%d \n",WSAGetLastError()); closesocket(sockrcv); WSACleanup(); return 0; } dest_sin.sin_family = AF_INET; dest_sin.sin_port = htons(DESTPORT); dest_sin.sin_addr.s_addr = inet_addr (DESTCAST); printf("recvfrom:"); iRecvLen = sizeof (recv_sin); if (recvfrom (sockrcv, szMessage, 100, 0, (struct sockaddr FAR *) &recv_sin, &iRecvLen) == SOCKET_ERROR) { printf ("recvfrom failed! Error: %d",WSAGetLastError ()); closesocket (sockrcv); return FALSE; } else { printf("Success!!!!\n"); } Sleep(1000); if((socksnd=socket (AF_INET, SOCK_DGRAM, 0)) == INVALID_SOCKET) { printf("socket failed with:%d\n",WSAGetLastError()); WSACleanup(); return 0; } reuseaddress = 1; if(setsockopt(socksnd, SOL_SOCKET, SO_REUSEADDR, (char FAR *)&reuseaddress, sizeof (reuseaddress)) == SOCKET_ERROR) { printf("setsockopt SO_REUSEADDR failed:%d\n",WSAGetLastError()); closesocket(socksnd); WSACleanup(); return 0; } if (bind (socksnd, (struct sockaddr FAR *) &local_sin, sizeof (local_sin)) == SOCKET_ERROR) { printf("bind failed:%d\n",WSAGetLastError()); closesocket (socksnd); return FALSE; } if (sendto (socksnd, szMessage, strlen (szMessage) + 1, 0, (struct sockaddr FAR *) &dest_sin, sizeof (dest_sin)) == SOCKET_ERROR) { printf ("sendto failed! Error: %d",WSAGetLastError ()); closesocket (socksnd); return FALSE; } else printf("Sending data succeeded!"); Sleep(1000); // Disable receiving on Sock before closing it. shutdown (sockrcv, 0x00); shutdown (socksnd, 0x00); // Disable sending on Sock before closing it. shutdown (sockrcv, 0x01); shutdown (socksnd, 0x01); // Close Sock. closesocket (socksnd); closesocket (sockrcv); return TRUE; } Tag: where is FAL(flash abstraction layer) sourec code Tag: 96157
  - 2
    - OTG module development for Mainstone II PXA270X - WinCE 5.0 Hi I am developing USB-OTG device driver module for Mainstone II board in WinCE 5.0. The module is not available with the WinCE 5.0 for Mainstone II rather the USB OTG driver is availble with WinCE 6.o Mainstone II board. Now I am doing BSP cloning for Mainstone II and adding the OTG driver by picking it up from WinCE 6.0/MainstoneIII/ drivers folder. Now I am facing certain issues in the same.:- There are certain header files - like pkfuncs.h, defbus.h and many others have been modified and many new header file have been added As a result of this - while building my driver - its giving lots of erros. Now some of the issues are WinCE 6.0 and some other are hardware (Mainsone II and Mainstone III specific) Since I am new ot WinCe - I am not sure - whether this approach is correct for building the OTG driver or not. Kindly help me on the same. Thanks & Regards Aman Tag: where is FAL(flash abstraction layer) sourec code Tag: 96156
  - 3
    - WinCE 5.0 Mainstone III BSP suspend/resume control panel start after very long time Hello I am encountering following problem with the Mainstone III BSP released by Microsoft on the Standard Mainstone III development board (Intel PXA27x Processor Developer`s Kit). When the system suspend (deep sleep) and resumed the system functions and system GWES functions. However when we try to access the control panel or any other applications available on the CE shell the system appears to got stuck. However after a long time the system recovers with that application being launched. From this point onwards system functions as normal. Has anybody seen this issue before? However if I use the Mainstone II BSP with (Intel provided suspend resume patch) the system functions as expected. Hence I feel that this behavior is caused by the Mainstone III BSP. Can some one help me on this matter? Many thanks in advance. Sankalpa Tag: where is FAL(flash abstraction layer) sourec code Tag: 96154
  - 4
    - Kernel Bootup Crashing at MDCreateThread Hello, I've seen multiple ppl with posts having the same issue, but no one posted a solution to the problem. So any help would be appreciated ?! I'm porting a PXA270 to WinCE500 and the kernel boots up all the way past OEMInit, then call the ARMinit()...to SchedInit(). In SchedInit is calls MDCreateThread() a data abort happens inside MDCreateThread() at KSTKBOUND(pTh) = pTh->ctx.Sp & ~(PAGE_SIZE-1); I'm using the Cache libraries from the Mainstoneii BSP under CSP code. Dump: OEMInit- Error Reporting Memory Reserved, dump size = 00100000 Booting Windows CE version 5.00 for (ARM) &pTOC = 80098ebc, pTOC = 8292f45c, pTOC->ulRamFree = 829cc000, MemForPT = 000000 00 Old or invalid version stamp in kernel structures - starting clean! Configuring: Primary pages: 5425, Secondary pages: 0, Filesystem pages = 211 Booting kernel with clean memory configuration: Memory Sections: [0] : start: 829cd000, extension: 00002000, length: 01531000 Sp=ffffc7cc ARMInit done. Windows CE KernelInit Updated eptr->e32_vsize to = 000d5000 <CRASH> BIB FILE: MEMORY BOOTLOADER 80000000 00080000 RESERVED NK 8008f000 02000000 RAMIMAGE RAM 820B0000 01F18000 RAM CONFIG BOOTJUMP=NONE COMPRESSION=ON PROFILE=OFF KERNELFIXUPS=ON ROMFLAGS=0 FSRAMPERCENT=0x0A0A0A0A AUTOSIZE=ON ROMSTART=80090000 ROMWIDTH=32 ROMSIZE=04000000 IF IMGTRUSTROMONLY IF IMGNOTALLKMODE ROMFLAGS=12 ENDIF IF IMGNOTALLKMODE ! ROMFLAGS=10 ENDIF ENDIF IF IMGTRUSTROMONLY ! IF IMGNOTALLKMODE ROMFLAGS=2 ENDIF IF IMGNOTALLKMODE ! ROMFLAGS=0 ENDIF ENDIF IF IMGPROFILER PROFILE=ON ENDIF IF IMGPROFILER ! PROFILE=OFF ENDIF Thanks Tag: where is FAL(flash abstraction layer) sourec code Tag: 96152
  - 5
    - newbie CE6 driver question I just downloaded an eval version of the CE6 development tool and I would like to build a simple system that supports an Intel 82546EB gigabit ethernet chip. This chip or a chip in the same family is used on most Pentium-M Compact PCI SBCs that are sold today. The Intel web site has the CE5 driver but I haven't found a CE6 driver and from what I read the older driver probably won't work. Am I stuck? DD Tag: where is FAL(flash abstraction layer) sourec code Tag: 96150
  - 6
    - CEPC - DP83815 Network PCI driver Hi, IÂ´m trying to use a PCI network adapter (NetGear FA311 ) that is based on DP83815 chipset from National on a CEPC setup. In this msdn page: http://msdn2.microsoft.com/en-us/library/aa908177.aspx this adapter model appears as a supported one by WinCE 6.0, but... There is no option in Catalog to turn on driver for this chipset, as were in Platform Builder 5.0 Qhat may I do to get this working?? Thanks, Lucas Tag: where is FAL(flash abstraction layer) sourec code Tag: 96147
  - 7
    - WinCE 6 - Adding PCL Printer Driver I've been running into a problem adding PCL printer support to a Windows CE 6 OS Design in Platform Builder 6. Platform Builder 6 comes with a common printer driver located in public\common\oak\drivers\printer . I would like to include this driver into my OS Design, however, it does not appear in the catalog list. My understanding from reading the archieves is that this driver showed up as "Printer PCL Support" in past version of Platform Builder, but I have not been able to locate it in version 6. Has anyone run into a similar problem, or perhaps know how to include this driver into the OS design by some other means? Cheers, Scott Tag: where is FAL(flash abstraction layer) sourec code Tag: 96144
  - 8
    - In the CDMA Smartfon, do we need the wwan module for the data connection? Hi, all, I saw there is a wwan minidport for GPRS module in the WIN CE smartphone design. Is this module needed in a CDMA smartphone which doesn't have the GPRS, instead EV-DO. thanks. Tag: where is FAL(flash abstraction layer) sourec code Tag: 96143
  - 9
    - RAS modem config Hi, has anybody experience with setting up the RAS Server for incoming Modem connections? Im trying to get the rasserver sample work. Using the GUI (LineConfig->RasDevConfigDialogEdit) is OK. Incoming modem connections work. (I only have to close the Dialog without needing to acknowledge any changes) If I take the LineConfigUnimodemSpeed Function instead the connection fails. The modem connected to my CEDevice answers the incoming call but hangs up immediately. Do I have to configure the LineDevConfigs? How? Tag: where is FAL(flash abstraction layer) sourec code Tag: 96131
  - 10
    - Problems when adding an entry to the network routing table. Hello, when I add a new entry to the network routing table my system hang up if the specified gateway is not online (e.g. the gateway computer is shutdown at the moment). After I have execute the following command: route ADD 192.168.105.0 MASK 255.255.255.0 192.168.105.10 METRIC 1 IF 3 the system doesn't work successfully anymore till I have reboot the hole system. The system cannot be accessed through telnet, FTP or each other protocol, but it responds successfully to all ping requests. With the PB 5.0 I discovered that something in the AFD component seems to block but I cannot find the cause. Maybe that something in the TCP/IP stack is corrupted to but I don't know why. I don't think that the problem is in the network driver because the device responds successfully to ping requests. Have someone else seen this problem before ? Is there a solution available for this curiosity ? I' using Windows CE 5.0 with all actual QFEs. Thanks in advance for any help. Regards, Ruediger Fichter Tag: where is FAL(flash abstraction layer) sourec code Tag: 96130
  - 11
    - Debugger Failed in PB Priavte Source in Microsoft Debuuger is failed in \Wince500\Private path I get error as Unknown: DEBUGCHK failed in file c:\macallan\private\winceos\comm\ppp2\ppp\app\pppinit.c at line 148 This is a microsoft code. I did something wrong with PB installation ?? or I am missing some settings ?? like .PDB files are not matching ?? Please help Tag: where is FAL(flash abstraction layer) sourec code Tag: 96128
  - 12
    - Auto deletion of files in SDHC cards Hi all, We are developing SD high capacity(4GB) card driver in WinCE.We are able to write and read the files after detection.But when we eject and insert the card later,we found the files missing in the card.If we paste some files in the card using card reader and then use the card in WinCE,we are able to view the files all the times.We miss the files only when written under WinCE.Whatshll we do?Pls help....... Thanks, Praba. Tag: where is FAL(flash abstraction layer) sourec code Tag: 96126
  - 13
    - making NK.nb0 Hi to all, I can see my PB generates NK.bin but I can not see NK.nb0 which I need. what modifications do I need in bib files to be able to generate NK.nb0 plus NK.bin. Best Regards.. Tag: where is FAL(flash abstraction layer) sourec code Tag: 96118
  - 14
    - Use IImage in WinCE Hi all, I am new to develop an AP on winCE 5.0 and I try to use the IImage library. Now I can load the JPG picture on the screen successfully and try to rotate it. However I met some problem. I had find some suggestion which indicate how to rotate bitmap step by step as follows: CoInitialize CoCreate CLSID_ImagingFactory CreateImageFromFile which returns you an IImage interface Query the IImage interface for IBasicBitmapOps interface use the IBasicBitmapOps interface to adjust brightness, contrast, gamma, rotation, etc. Use the IImage interface to Draw the bitmap on the screen I just can't understand which does the "Query the IImage interface for IBasicBitmapOps interface" means. Here is my code and would anyone tell me where is going wrong ? By the way, is it possible to use the IImage library to convert from JPG to BMP and PNG ? Thanks in advance, any suggestion will be appreciated. ::CoUninitialize(); IImagingFactory *pFactory = NULL; IImage *pImage = NULL; ImageInfo *info = NULL; IBitmapImage *rotebitmap = NULL; IBasicBitmapOps *oper = NULL; ::CoCreateInstance(CLSID_ImagingFactory, NULL,CLSCTX_INPROC_SERVER,IID_IImagingFactory, (void **)&pFactory); pFactory->CreateImageFromFile(L"\\jupiter.jpg", &pImage); pFactory->CreateBitmapFromImage(pImage, 0, 0, PixelFormatDontCare, InterpolationHintDefault, &rotebitmap); pImage->QueryInterface(IID_IBasicBitmapOps, (void **) &oper); oper->Rotate(180.0, InterpolationHintDefault, &rotebitmap); pImage->Draw(hdc, &test , NULL); Tag: where is FAL(flash abstraction layer) sourec code Tag: 96116
  - 15
    - RNDIS - Hangs during transfres Hi all, My setup is includes an ARM based processor running WINCE 5.0. I have RNDIS working, but it hangs during data transfers. I have searched this workgroup, and I found some other posts describing similar problems, but no solution was described. I suspect that this problem is related with not sending a zero packet in some specific situations. I could see that if I start pinging the device while it is stalled, the device resumes its transfers. For example, I opened a shared folder on the device from the desktop and it took very long time (minutes) to open. If during this operation I open a telnet session and then just keep on pressing <enter> key - the device folder shows up in less then 10 seconds. The host PC is windows XP SP2. I am using "RNDIS-USB-Kit_05.exe" as host side RNDIS driver. I am using the same usbfn driver for mass storage and for activesync without any problem. Any suggestions? Thanks, Michael. Tag: where is FAL(flash abstraction layer) sourec code Tag: 96110
  - 16
    - File System I am working on a slow suspend problem on my pda running WM5.0 on Intel PXA270. I noticed that the function call in the power manager FileSystemPowerFunction(FSNOTIFY_POWER_OFF); is taking very long to return. Does anyone has experience with this? Thanks. Tag: where is FAL(flash abstraction layer) sourec code Tag: 96100
  - 17
    - Transferring Image to CEPC over Ethernet I am able to boot CEPC using Floppy Disk But in my PB 3.0 the device name does not reflect. I am using my company's network. There is a DHCP server. Require urgent help Tag: where is FAL(flash abstraction layer) sourec code Tag: 96099
  - 18
    - How to set Startup function at address 0 in eboot how to tell MIPS compiler and linker set "Startup" function at address 0 when build eboot in wince5.0. thank you in advance Tag: where is FAL(flash abstraction layer) sourec code Tag: 96097
  - 19
    - Does anybody verifiy SyChip chipset SDIO WiFi card function on CE6 Hi all: I can see WiFi configuration tool have run when the Sandisk WLAN6060SD card insert to Ce6.0 device, but it's can't setting up connection to AP. I have verified my AP should be OK. Thanks! Tag: where is FAL(flash abstraction layer) sourec code Tag: 96096
  - 20
    - Does ISLP2NDS.DLL work with ZCOM XI-825 ? Does ISLP2NDS.DLL work with the old ZCOM XI-825 ? The XI-825 is based on PRISM 2.5. What registry settings are required ? Tag: where is FAL(flash abstraction layer) sourec code Tag: 96091
  - 21
    - Power CTPNL applet CE6 What has happened to the power management control panel applet with CE 6.? I have built a kernel with full power management capabilities, but the control panel applet that lets me configure the timeouts before transitioning to lower power states is not there any more. What do I need to do to get this back? Tag: where is FAL(flash abstraction layer) sourec code Tag: 96080
  - 22
    - makeimg with new pm.dll I want to use a new pm.dll in my image that was sent from microsoft to display debug messages. So I replaced the old pm.dll with the new one in my release directory, the platform retail directory, and all other directories that I saw pm.dll in. Then I did a makeimg and downloaded the new image to my device After bootup, I don't see any debug messages. When I look in the windows directory on the device, I see that the old pm.dll is there, because the file size is much smaller than the new one with debug messages. So this is where I'm stuck. I searched the whole hard drive for any instances of the old pm.dll and none exist. Any suggestions? Tag: where is FAL(flash abstraction layer) sourec code Tag: 96077
  - 23
    - Error: Kernel fixup module hd.dll Hello all, what does this error mean and what do I have to modify in order to fix it? Error: Kernel fixup module hd.dll dataptr [8014b000] != m_vreloc [1b0000] I get this in the makeimg phase and I don't have any clue. I'm working with PB5.0. TIA -- Michael Reim reim AT helmut-fischer DOT de Tag: where is FAL(flash abstraction layer) sourec code Tag: 96071
  - 24
    - PCI Sound Card on a CEPC with CE 5.0 I am forced to create a new Windows CE 5.0 image for a customer that wants wave audio. The problem is that I have to find on the market a PCI Soundcard that can be managed on a CEPC with a existing CE driver. The number of samples that we need to create does not justify the development of a specific Wave driver. Have you any information about current commercial PCI cards that have drivers for Windows 5.0? And what are the chips that they use? Thank you in advance Panino Tag: where is FAL(flash abstraction layer) sourec code Tag: 96070
  - 25
    - Debugging Tools Hi, Is there any tools or application for debugging the source code(eVC++,VC++ ) for WinCE 4.2/ WinCE 5.0/WinCE 6.0,which will find where is the bugs,Memory leaks and chance of failing the logic in the source code? I have already tried Entrek Software Inc tool for debugging,it seems to be ok but want some more information and experience of others( who had already used entrek's tools). Please suggest any good tool . Thanks in Advance. Amit Golhani Tag: where is FAL(flash abstraction layer) sourec code Tag: 96069
- Next
  - 1
    - Downloading the Run-Time Image fails Hi, iÂ´ve a board with Geode LX Processor and Realtek Ethernet. Downloading the Run-Time Image from Platform Builder over Ethernet fails with the Message 'Bad RX Packet' after the download has begun. The Message appears at a terminal program which is connected with the serial debug port. The board was booted over USB FDD with CEPC Bootdisk (loadcepc.exe) and over Bios bootloader (\WINCE500\PUBLIC\COMMON\OAK\CSP\X86\BIOSLOADER\DISKIMAGES\bootdisk.144). In both cases the error was the same. Any hints? Thanks, Andy Tag: where is FAL(flash abstraction layer) sourec code Tag: 96067
  - 2
    - CEDDK and pkfuncs.h Hi! I'm currently working on a CEPC based platform and a custom PCI card. For the PCI card, I need some access to the PCI base addresses and used MmMapIoSpace or TransBusAddrToVirtual[1]. Those functions are declared in ceddk.h and you need to link ceddk.lib. However, while ceddk.h is, ceddk.lib isn't installed with the SDK generated from my platform, why? Also, ceddk.h needs pkfuncs.h, which isn't installed either!? Am I doing something wrong? Uli [1]: Just wondering, should those also work under NT (5 or later)? I haven't tried it yet. Tag: where is FAL(flash abstraction layer) sourec code Tag: 96056
  - 3
    - Why the system become very slow when accessing the folder in SD card? Why the system become very slow when accessing the folder in SD card if there is a exe file in the folder whose size is large than 2M bytes. My platform is PXA270 and using WinCE5.0. I use the SD/MMC controller of the PXA270 to access the SD card.Everything is OK except exe files larger than 2M. When I create a folder in the SD card and store a exe file(larger than 2M) in it. then accessing this folder will be very slow at first time.Why?who can help me? Tag: where is FAL(flash abstraction layer) sourec code Tag: 96053
  - 4
    - Adding a new target device I've just installed the BSP for my new development (MX-31 from Freescale, RTM 12) and built the kernel so now I want to download it to the board. I go to Connectivity Options and select Add Device but the BSP isn't listed in the "Associated OS Design/SDK" box, even though the BSP is listed in the Catalog. The only way I can get it listed is to create an SDK and install it. Is there a way of getting a BSP listed so I can create a connection based on it? Is this a known problem? Tag: where is FAL(flash abstraction layer) sourec code Tag: 96021
  - 5
    - USB not detected - help I inserted the (GSM modem)USB device to one of the ports of my USB HUB which is connected to host port 1 of pxa270 processor. I also inserted USB mouse, pen drive to this hub. These devices are detected. But the GSM device is not detected if the USB cable is plugged-in while booting. After bootup, once the image has comeup, if I plug-in the GSM USB device, then the "Unidentified USB device" pop-up has come. Actually where is the problem? I couldnot get it? Immediate help needed..... Tag: where is FAL(flash abstraction layer) sourec code Tag: 96020
  - 6
    - corecon "conflict" with Platform Builder & Visual Studio 2005 Hi, I have both Platform Builder & Visual Studio 2005 installed & have created a variety of SDK "projects" projects .. mostly X86 based. I'm not quite sure how it happened, but Visual Studio will not create a "Smart Device" project ("project failed") when "corecon" exists in "C: \Documents and Settings\All Users\Application Data\Microsoft" folder. It appears that Platform Builder requires that folder for (at least) "connectivity" options. I don't think that I should have to install/de-install that folder when running the two programs? ... If the folder (or a file in that folder) has been corrupted, is there a way to tell? [I don't have the original contents] Before this issue was seen, I created & installed an SDK (X86 based CE) but the new "selection" was not seen in Visual Studio list of devices .. I don't think this was the cause.... I've seen messages on this discussion board indicating that PB should "rebuild/recreate" the corecon folder if it's not there .. I tried that but the folder was not created. I've de-installed VS2005 & will re-install tonite to see if that will help .. Any Ideas? Thanks in advance !!!! Tag: where is FAL(flash abstraction layer) sourec code Tag: 96011
  - 7
    - IE 6.0 User agent settings Hi, I am using IE6.0 in my Win CE 5.0 platform. Is there any way to extend the User Agent parameters so they would support the ones that PPC does? For example : HTTP_UA_COLOR="color16" HTTP_UA_CPU="TI OMAP1510" HTTP_UA_LANGUAGE="JavaScript" HTTP_UA_OS="Windows CE (Pocket PC) - Version 4.20" HTTP_UA_PIXELS="240x320" HTTP_UA_VOICE="TRUE" HTTP_USER_AGENT="Mozilla/4.0 (compatible; MSIE 4.01; Windows CE; PPC; 240x320)" Ohad Tag: where is FAL(flash abstraction layer) sourec code Tag: 96007
  - 8
    - FSD support for card lock/unlock with password in win ce Hi I'm trying to write win ce host driver which supports MMC 4.2 spec. MMC spec says card lock/unlock feature with password should be supported. If I see the existing code, the FSD uses IOCTL to read/write/format etc operations on the card. To support lock/unlock some sort of IOCTL code (like IOCTL_DISK_READ used for read) should be present in the win ce code base. In the extsing code also, the present host driver(MMC 3.x) doesn't implement the lock/unlock feature. I want to know whether FSD supports this feature, because all card access operations has to go through FSD only. Please help --SOMRUP Tag: where is FAL(flash abstraction layer) sourec code Tag: 96006
  - 9
    - Bug in Mainstone pdsocket.cpp Failed calls to RegQueryValueEx for IRQ values will cause polling mode to be disabled even if polling mode is explicity commanded in the registry. Was the intent to force polling mode if the call fails ? i.e. if (no valid IRQ values) the pollingMode = TRUE. Tag: where is FAL(flash abstraction layer) sourec code Tag: 96005
  - 10
    - Wince 6 WLAN over USB HI all, I am in the development process of a WLAN driver for Wince 6. My device is pluggable to usb it has the chipset ZD1211 and is manufactured by ZCOM. I think i will have to get the NDIS packets coming from up and transfer that to WLAN frame format and send it down as a usb packet to the host contrloller. Is there any inbuilt support in the PB for these kind of drivers if any thing is there please let me know. If some registry enteries are there please let me know that also THANKS & REGARDS NOOR Tag: where is FAL(flash abstraction layer) sourec code Tag: 96004
  - 11
    - "jumping to 0x0013603c" I am getting: "jumping to 0x0013603c" on the target in response to: loadcepc /v /c:1 /b:115200 sboot.bin the platform builder is set up to download to the target via the target/connect menu. The target simply hangs there? Target is a std PC booted with the CE boot floppy. It is connected to the dev. PC with a null modem serial cable. thanks, Steen Tag: where is FAL(flash abstraction layer) sourec code Tag: 96002
  - 12
    - Data Abort when interrupt is enabled Hi all, I am developing BSP for MC9328MXL litekit in WINCE 5.0 Version. After successfully downloading the kernel image into the target, the kernel calls OEMInit() function. I have not enabled KITL for time being. After the successful execution of ARMInit() function, the processor is switched to supervisor mode and IRQ is enabled. after the execution of msr cpsr_c, r1 instruction, I get data abort ( pc is pointing to 0xffff0010 address). stmfd sp!, {r6} ; 5th argument: &OEMAddressTable CALL ARMInit ldmfd sp!, {r6} mov r1, #SVC_MODE msr cpsr_c, r1 ; switch to Supervisor Mode w/IRQs enabled CALL KernelInit ; initialize scheduler, etc. mov r0, #0 ; no current thread mov r1, #ID_RESCHEDULE b FirstSchedule Does anybody know what might be the reason for data abort. Please let me know. Thanks & Regards, Chitra Tag: where is FAL(flash abstraction layer) sourec code Tag: 96000
  - 13
    - KITL not working fine Hi all, I am developing a CE6 image for a x86 (etx-PM from Kontron). I am using a dedicated RTL8139 compatible D-link card for downloading. The download seems to complete properly (that is what the corresponding dialog box and serial port messages say). Both, debug and release versions, boot properly if I do NOT "Enable KITL" in "Build Options". But there is no way to make the image boot if I "Enable KITL". After some message in the debug window and the serial port the process hangs. Often, even the PlatBuilder hangs. I also tried checking "Enable KITL" in "Build Options" and NOT checking "Enable KITL on device boot" in "Connectivity Options"-> "Core Service Settings". When doing this, the device boots and works fine until it tries to connect to PlatBuilder and hangs. I have tried disabling Interrupt Sharing, working in Polled mode and disabling the VIMI. Nothing changes. There is no CE6 driver available for the board yet (they will be comming on some month). In the meantime, I am working with a sample image with support for basic devices, such as mouse and keyboard. I want to believe this is not the problem... Does anyone have an idea of what may be happening??? Is there any way I could debug Applications without KITL??? Thanks a lot for your time. maite Tag: where is FAL(flash abstraction layer) sourec code Tag: 95991
  - 14
    - 852GM chipset PE5.0 USB driver hangs. Dear all, I can't start up my USB EHCI & UHCI drviers in my x86 852GM chipset. I tried "BSP_USB_EHCI" & "BSP_USB_UHCI" , doesn't work. So I downloaded drivers from Intel website, using "BSP_USB_EHCI_ICEG" "BSP_USB_UHCI_ICEG".. But It still doesin't work. Any Idea? Tag: where is FAL(flash abstraction layer) sourec code Tag: 95989
  - 15
    - AtciveSync USB-connection hangs Hello All! Excuse for my bad English. I use SMDK2410 and WinCE 5.00. I have installed ActiveSync on myboard, have installed USB unction controller driver and USB function serial client driver. Then I have established connection with PC through USB (115200bps) without any problem. But connection hangs by transfer of the large files from PC to board. I have studied this conference and have found out that the problem arose not only at me. But have advised only one thing: to install all available QFEs, because one of them contains update for SMDK2410 USB function controller driver PDD. But certainly I have installed all available QFEs already in a long time. It has given nothing. Who can explain me why AC-connection hangs? In debug log I see strange errors: ............ 0x83b6a000: UsbFnMdd!UfnMdd_Notify: ++ 0x83b6a000: UsbFnMdd!ProcessRequest: ++ 0x83b6a000: UsbFnMdd!ProcessGetDescriptor: ++ 0x83b6a000: UsbFnMdd!SetupTx: ++ 0x83b6a000: UsbFnMdd!UfnMdd_IssueTransfer: ++ 0x83b6a000: UsbFnMdd!CPipe::IssueTransfer: ++ 0x83b6a000: !ERROR: Calling EnterCriticalSection on a CS (01f5f884) that is not initialized! 0x83b6a000: Coredll: DEBUGCHK failed in file d:\macallan\private \winceos\coreos\core\dll\cscode.c at line 87 0x83b6a000: DEBUG_BREAK @03f73290 MD=1f Ignored. 0x83b6a000: !ERROR: Calling EnterCriticalSection on a CS (01f5f884) that is not initialized! 0x83b6a000: Coredll: DEBUGCHK failed in file d:\macallan\private \winceos\coreos\core\dll\cscode.c at line 87 0x83b6a000: DEBUG_BREAK @03f73290 MD=1f Ignored. 0x83b6a000: !ERROR: Calling EnterCriticalSection on a CS (01f5f884) that is not initialized! 0x83b6a000: Coredll: DEBUGCHK failed in file d:\macallan\private \winceos\coreos\core\dll\cscode.c at line 87 0x83b6a000: DEBUG_BREAK @03f73290 MD=1f Ignored. 0x83b6a000: !ERROR: Calling EnterCriticalSection on a CS (01f5f884) that is not initialized! 0x83b6a000: Coredll: DEBUGCHK failed in file d:\macallan\private \winceos\coreos\core\dll\cscode.c at line 87 0x83b6a000: DEBUG_BREAK @03f73290 MD=1f Ignored. 0x83b6a000: W2410UsbFn!UfnPdd_IssueTransfer: ++ 0x83b6a000: W2410UsbFn!StartTransfer: ++ 0x83b6a000: W2410UsbFn!HandleTx: ++ ............... It means that USB function client driver does not initialize some critical setcions. There can be a reason of a bug in it?.. Or there can be a problem in something other?.. I understand that I have given not enough information, but this problem arose not only at me, therefore probably there is any universal decision? Any help will be greatly appreciated! Regards, Sergey. Tag: where is FAL(flash abstraction layer) sourec code Tag: 95986
  - 16
    - Evaluation boards for windows ce 6.0? hi i searched the web for evaluation boards based on windows ce 6.0. there weren't a lot results for that. especially i'm interested in boards with arm processors. are there already some available? i would appreciate it if some of you know about some vendors... thanks jack Tag: where is FAL(flash abstraction layer) sourec code Tag: 95983
  - 17
    - help needed in debugging kernel Hi all, I have developed BSP for MC9329MXL target. I have downloaded kernel image to the target through ethernet and I have ensured that I enter into kernelstart function. My question is can I now debug the kernel using platform builder or I can debug only after the first thread get initialized. Please reply. Thanks & Regards, Chitra Tag: where is FAL(flash abstraction layer) sourec code Tag: 95978
  - 18
    - Aodio Volume copntrol in Control Panel Dear All, I have WinCE 5.0 ported on x86 platform. Unfortunately the device does not have that powerful speakers. When the volume is increased to maximum from the control panel and the volume is increased to maximum in the media player then the voice starts cracking and sounds as if it is playing from a speaker with torn cone. Is there any way to bring down the level of Maximum volume in the Control Panel. I believe right now it can be upto FFFFFFFF. How can I limit to lesser Value? Thanks and Advance Tag: where is FAL(flash abstraction layer) sourec code Tag: 95975
  - 19
    - why wince 6.0 can't open .cec file? I have a .cec file from wince5.0. now I want to open it with 6.0,but 6.0 told me: the .cec file could not be imported: d:\tmp\a.cec: warning PBC4000: Unparsable Date value. d:\tmp\a.cec: warning PBC4000: Unparsable Date value. ... d:\tmp\a.cec: warning PBC4000: Variables with empty values are ignored, not unset. d:\tmp\a.cec: warning PBC4000: Unparsable Date value. ... a part of my .cec file like this: ... ComponentType ( Name ( "BSPs" ) GUID ( {3CABD6DA-B577-4A87-9490-9432E80DC2F1} ) Description ( "Board Support Packages" ) MaxResolvedImpsAllowed( 999 ) Implementations ( Implementation ( Name ( "gkk: ARMV4I" ) GUID ( {13961219-5072-4B8F-A471-917EF0DF5B71} ) Description ( "BSP for the gkk Evaluation Board." ) BSPPlatformDir ( "gkk" ) Version ( "5.0.0.0" ) Locale ( 0409 ) Vendor ( "gkk" ) Date ( "9/29/2005" ) Children ( "{00A3DE91-FAAE-4110-B675-031DFFE48400}" ) ... maybe the Date is wrong? this .cec can be opened with wince5.0 correctly. Tag: where is FAL(flash abstraction layer) sourec code Tag: 95974
  - 20
    - time zones in mexico I'm trying to work through the DST changes for 2007. http://www.microsoft.com/windows/timezone/dst2007.mspx talks about new time zone registry keys for mexico since it is not adopting the new rules, but KB 923027 and the QFE don't create a new one for Pacific Time for Mexico. KB923953 for windows mobile does create a new listing for Tijuana. Is there going to be an update for OEM users ? Tag: where is FAL(flash abstraction layer) sourec code Tag: 95969
  - 21
    - CEPC PCMCIA problems on CE 4.2 I've been having trouble with CEPC and PCMCIA on CE 4.2. I have an AMD Athlon 2000+ with a ELAN P111 PCI-to-PC Card controller (with a TI PCI1211PGE chip). From what I've been told, the TI PCI1211 is compatible with the TI 1250 PCMCIA controller. I've configured the platform to have the TI 1250 PCMCIA controller. When I upload the image, PCMCIA.DLL does not get loaded. What am I doing wrong here? Just as a side note, if I reconfig the platform to use the i82365 and then rebuild, I see PCMCIA.dll get loaded. In IsValidPCISig(), it detects the wrong controller and exits. So it seems like if I reconfig the platform to use he wrong controller, PCMCIA.dll loads. BUT if I config the platform to use the right controller, then PCMCIA DOESN'T LOAD. Strange. Thanks, ((&-> Tag: where is FAL(flash abstraction layer) sourec code Tag: 95968
  - 22
    - audio player application The CE 5.0 help documents SYSGEN_STREAMAUDIO which is audio-only streaming (and supports SYSGEN_LOCALAUDIO too from the way it seems). What isn't clear is whether this is only the support via DirectShow or whether there is any application that might drive it. Will SYSGEN_CEPLAYER work without a bunch of DirectShow video support ? It is all a bit confusing. I don't see anything that is audio specific, so I'm fearful that if I plan to use SYSGEN_CEPLAYER, I'll end up with video support which is too much for my hardware. Thanks! Tag: where is FAL(flash abstraction layer) sourec code Tag: 95962
  - 23
    - PCMCIA thread priority in CE 5.0 The help in CE 5.0 says that PCMCIA runs at priority level 105, 106, and 107, but that doesn't appear to be the case. In previous CE 4.x builds, functions registered with CardRequestIRQ ran at 105, but they appear to run at 251 in CE 5.0. Is this a bug, has it been QFE'd ? Tag: where is FAL(flash abstraction layer) sourec code Tag: 95959
  - 24
    - Lost PB registration key..? Hi I do have a bit of a problem. We do have an installation on a computer in my company, where the PB 5.0 is installed with the registration key. The computer is old (and slow) I would like to get PB installed on my own computer. But the serial number has been lost !!! (Actually its my boss who has lost it, so Its not me to blame :-)) Is there any why of extract/move it from the old computer ?? Is there any way of getting the lost serial number back or do we have to by a new copy ? I know it sound like I will use a illegal copy but that not the case.. /Thomas -------------------------------------------------------------------------------- I am using the free version of SPAMfighter for private users. It has removed 48 spam emails to date. Paying users do not have this message in their emails. Try SPAMfighter for free now! Tag: where is FAL(flash abstraction layer) sourec code Tag: 95957
  - 25
    - Media Player class id? I am using PB 5.0. I have seen several coding examples that reference the Windows Media Player with a clsid of {6bf52a52-394a-11d3-b153-00c04f79faa6} but this clsid does not exist on my built OS. I have a Windows Mobile 5 device that does have this clsid defined in the registry. I have included the media player ocx in the PB project and I have installed all of the latest QFE's. Why does the Windows Mobile 5 OS have this clsid and not my Windows CE 5.0 OS? Any information would be appreciated. Tag: where is FAL(flash abstraction layer) sourec code Tag: 95956

hi,all
where is FAL(flash abstraction layer) sourec code, is is open sourece
code?

thank you in advance

Re: where is FAL(flash abstraction layer) sourec code by Steve

Steve
Sun Feb 04 12:58:04 CST 2007

>where is FAL(flash abstraction layer) source code, is open source code?
Very little, if any, code from MS can be considered Open Source by current
definitions of that phrase. The FAL source is not provided for OS versions
prior to V6.0. In V6.0 it is part of the Shared Source code of the kernel
which is provided under the Shared Source License from Microsoft.

--
Steve Maillet
EmbeddedFusion
www.EmbeddedFusion.com
smaillet at EmbeddedFusion dot com

Top