dot net cf updata

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Problem including ddraw.lib, getting an unresolved symbol _DirectDrawCreate error, am i doing this in the right way? I´m trying to modify the taskbar code and want to include directdraw support. In embedded visual c I only have to link to ddraw.lib and include ddraw.h in the source file. I have tried to include the path to ddraw.h in PB using a right click at the project taskbar : project taskbar->Settings-> c/c++->Include Directories: $(_PUBLICROOT)\SHELL\OAK\HPC\INC;..\inc;$(_PUBLICROOT)\COMMON\sdk\inc;$(_PUBLICROOT)\COMMON\oak\inc ddraw is in the folder : $(_PUBLICROOT)\COMMON\sdk\inc so the compiler should not have any problem with that. Secondly I have included ddraw.lib using another right click: project taskbar->Settings->Link->Additional Libraries: ddraw.lib But I get an external error when trying to build and sysgen the project in built.log : unresolved external symbol _DirectDrawCreate referenced in function "public: __thiscall CTaskBar::CTaskBar(void)" (??0CTaskBar@@QAE@XZ) taskbar.lib(taskbar.obj) Is there eny other way I should do this or ? I haven´t found any way to set the *.lib files location either as in embedded visual c. Thanks for helping me out, Dani Tag: dot net cf updata Tag: 68900
  - 2
    - Will OEMinterruptHandler be preempted by a higher priority IRQ? Dear All, I am using ARM920t and WinCE4.2. I am doing one installable ISR for my device driver. My question is that the OEMInterruptHandler can be preempted by a higher priority external IRQ,such as ethernet,UART,etc.? WindowCE said it support nested interrupt, but I think ARM cpu have only one IRQ, so when OEMInterruptHandler is being excuted, nobody can preempt it. Am I right? If yes, the installable ISR will reduce the response time of the whole system, right? Thank you. Lee Tag: dot net cf updata Tag: 68895
  - 3
    - Load Fonts From USB Storage Device Hi, I would like that Windows CE loads its fonts on an external USB storage device. To do so I set the following registry key: [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\FontPath] "FontPath"="\\Hard Disk\\System\\Fonts" It does not work. When I start an application it receives an unhandled exeption and the application stops. I think that it might be because my USB device is not mounted when Windows CE try to "load" (I don't know exactly how it works) all available fonts. Is there any way to delay the "load" of the fonts or to force the USB devices to be mounted before? I have to use an external USB storage device because this is the only place there is enough room to receive the fonts. Thank you Tag: dot net cf updata Tag: 68893
  - 4
    - Activity timers Could someone pls tell me why the following code does never return from the second WaitForSingleObject call !? HANDLE Active = OpenEvent(EVENT_ALL_ACCESS, FALSE, TEXT("PowerManager/SystemActivity_Active")); HANDLE Inactive = OpenEvent(EVENT_ALL_ACCESS, FALSE, TEXT("PowerManager/SystemActivity_Inactive")); if (WaitForSingleObject(Inactive, INFINITE) == WAIT_OBJECT_0) { if (WaitForSingleObject(Active, INFINITE) == WAIT_OBJECT_0) // <- Stall forever { // Some code } } I'd like to handle Inactive-to-Active transition state using activity timers but do not understand windows behaviour ... I'm able to wait for "Inactive" event, howether it stalls inside the second wait for "Active" event independent from the actual activity on the system. Any ideas? Thanks. Tag: dot net cf updata Tag: 68882
  - 5
    - PAN Bridging Does somebody know if is it possible to bridge a Bluetooth PAN interface and other class of network adapters through MBridge configuration?´under PB 5.0. I think I read this is not possible. I would like to know, if there is a way for it. Edgar Tag: dot net cf updata Tag: 68879
  - 6
    - Is is possible to write a FMD for NAND flash supporting all the NA I mean if a FMD can support 2112byte/page NAND as well as 528byte/page NAND? Does FAL needs modifying? BRs, Aaron Tag: dot net cf updata Tag: 68877
  - 7
    - SMC9000.LIB -----> EBOOT I am developing EBOOT using smc9000.lib in common\driver\ethdbg\smc9000 for lan91c96. When EBOOT runs, in PB there is target name in device name box. But EBOOT sends Sent BOOTME to 255.255.255.255 Sent BOOTME to 255.255.255.255 If smc9000.lib is avaible and anybody successfully applies it? Tag: dot net cf updata Tag: 68868
  - 8
    - Edit Control of Window CE 4.2 problem Dear all: Here I meet with a problem about edit control. My edit control has multiline property. And I set the max characters through EM_LIMITTEXT with prarmeter -1, wanting to including 0x7FFFFFFE characters. But when I set text, I find that answer isn't right. For example, when I reading 500k text contents and set to edit control, edit control cannot display all contents. Although the text already set right into edit control. It seems that edit control only display about 0xFFFF (65,535) characters. But when I call GetWindowText, I can get all contents I set, seems that only display has problem. Anyone meet this problem ? Or is it windows ce 4.2 's bug or can avoid it through other method ? Thanks a lot! Jack. Tag: dot net cf updata Tag: 68865
  - 9
    - downloading image without PB? I think PB is using TFTP to load the device? anyone tried to load image using a tftp client? Tag: dot net cf updata Tag: 68864
  - 10
    - SMSC 91C111 and PXA270 Hi, I am using the driver provided by SMSC for the LAN91C111 ethernet controller. the settings are VLIO, 16 bit bus. The driver is accessing all registers correctly accept for the interrupt register, where it fails to acknoledge TX interrupt, and therefor stuck forever trying to clear the TX bit. When I am enabling KITL, VMINI is working OK with interrupts enabled. The ethdrv is able to access the 91C111 when the bus is configured for 32 bit using OUTPORT16 and INPORT16 macros, but the ndis driver fails to access with the same settings. I have to switch to 16 bit mode in order for the ndis driver to be able to succeed even in a simple read/write test. 1. Why is the difference? 2. Is someone had the same problem in reading interrupt status register? Thx, Lrz Tag: dot net cf updata Tag: 68853
  - 11
    - s3c2410x cpu miss Uart1 Interrupt??? In OEMInterruptHandler(), I add some code to see Uart FIFO count. I set my uart Rx-interrupt trigger level : 4 bytes. In my expectation, the debug msg is: Check Uart1 FIFO Count 4 Check Uart1 FIFO Count 4 Check Uart1 FIFO Count 4 .... But sometime, the debug msg is: Check Uart1 FIFO Count 15 ..... It means the Overrun error, the FIFO is full. Why? The CPU miss Uart1 Interrupt? or OS call OEMInterruptHandler() too slowly? Please give me a hand, thx for your suggestion. [OEMInterruptHandler] ///////////////////////////////////////////////////// else if(IntPendVal == INTSRC_UART1) // SERIAL { RETAILMSG(0, (TEXT("INT:SYSINTR_SERIAL INT\r\n"))); SubIntPendVal = s2410INT->rSUBSRCPND; if(SubIntPendVal & INTSUB_ERR1) { s2410INT->rINTSUBMSK |= INTSUB_ERR1; } else if(SubIntPendVal & INTSUB_RXD1) { s2410INT->rINTSUBMSK |= INTSUB_RXD1; //***************************************************************** RETAILMSG(1, "Check Uart1 FIFO Count %d", (pUart1->rUFSTAT & 0xf) ); } else if(SubIntPendVal & INTSUB_TXD1) { s2410INT->rINTSUBMSK |= INTSUB_TXD1; } else return SYSINTR_NOP; /////////////////////////////////////////////////////////// Tag: dot net cf updata Tag: 68851
  - 12
    - how to enable USB KITL on PXA270 BSP Tag: dot net cf updata Tag: 68849
  - 13
    - SDK Development problems I'm deveoping a custom BSP and platform. Everything so far is OK, except I have to export and SDK and Platform builder fails to do so. here is a log: Rolling sysgen'ed headers and libs Ka-Ro STK3 Dev Platform: ARMV4I_Release Error: This build configuration has not been sysgen'ed Error adding sysgen'ed headers and libs Error rolling toolkit-specific files MSI file construction completed. 3 error(s), 0 warning(s). I sysgened all my configurations (Debug and Release) thousan times and still cannot build an SDK. Does any body know what is the real problem. Thanks Alexander Tag: dot net cf updata Tag: 68848
  - 14
    - When download nk.bin to target device,it shows checksum error? Hi,all, CPU = intel pxa270,os = wince5.0 And I use mainstoneii BSP. When I download nk.bin to target device,serial port outputs the following messages: INFO: SMSC LAN91C111 Ethernet controller initialized. INFO: MAC address: 0-40-B8-51-A8-9D System ready! Preparing for download... INFO: Using device name: 'MAINSTN43165' +EbootSendBootmeAndWaitForTftp Sent BOOTME to 255.255.255.255 Sent BOOTME to 255.255.255.255 Locked Down Link 1 Src IP 192.168.190.2 Port 0400 Dest IP 192.168.190.3 Port 0B28 EthDown::TFTPD_OPEN::boot.bin -EbootSendBootmeAndWaitForTftp ****** OEMVerifyMemory checking physical range [ 0xA0100000 ==> 0xA128B697 ]... ****** RAM address ****** ERROR: Checksum failure (expected=0x6609C computed=0x6607C) ****** Checksum failure on record 8, ABORT!!! ****** And I find that DownloadImage function has the following codes: if (!VerifyChecksum (dwRecLen, lpDest, dwRecChk)) { EdbgOutputDebugString ("****** Checksum failure on record %d, ABORT!!! ******\r\n", nPkgNum); HALT (BLERR_CHECKSUM); return (FALSE); } And VerifyChecksum is the following: static BOOL VerifyChecksum (DWORD cbRecord, LPBYTE pbRecord, DWORD dwChksum) { // Check the CRC DWORD dwCRC = 0; DWORD i; for (i = 0; i < cbRecord; i++) dwCRC += *pbRecord ++; if (dwCRC != dwChksum) EdbgOutputDebugString ("ERROR: Checksum failure (expected=0x%x computed=0x%x)\r\n", dwChksum, dwCRC); return (dwCRC == dwChksum); } I don't know where is wrong. I download nk.bin to other device,it is right.So I think nk.bin is ok. Tag: dot net cf updata Tag: 68847
  - 15
    - When download nk.bin to target device,it shows checksum error? Hi,all, CPU = intel pxa270,os =wince5.0 And I use mainstoneii BSP. Now When I download nk.bin to target device,serial port outputs the following message: INFO: SMSC LAN91C111 Ethernet controller initialized. INFO: MAC address: 0-40-B8-51-A8-9D System ready! Preparing for download... INFO: Using device name: 'MAINSTN43165' +EbootSendBootmeAndWaitForTftp Sent BOOTME to 255.255.255.255 Sent BOOTME to 255.255.255.255 Sent BOOTME to 255.255.255.255 Locked Down Link 1 Src IP 192.168.190.2 Port 0400 Dest IP 192.168.190.3 Port 0B28 EthDown::TFTPD_OPEN::boot.bin -EbootSendBootmeAndWaitForTftp ****** OEMVerifyMemory checking physical range [ 0xA0100000 ==> 0xA128B697 ]... ****** RAM address ****** ERROR: Checksum failure (expected=0x6609C computed=0x6607C) ****** Checksum failure on record 8, ABORT!!! ****** I find that DownloadImage function has the following codes: if (!VerifyChecksum (dwRecLen, lpDest, dwRecChk)) { EdbgOutputDebugString ("****** Checksum failure on record %d, ABORT!!! ******\r\n", nPkgNum); HALT (BLERR_CHECKSUM); return (FALSE); } and VerifyChecksum is the following: static BOOL VerifyChecksum (DWORD cbRecord, LPBYTE pbRecord, DWORD dwChksum) { // Check the CRC DWORD dwCRC = 0; DWORD i; for (i = 0; i < cbRecord; i++) dwCRC += *pbRecord ++; if (dwCRC != dwChksum) EdbgOutputDebugString ("ERROR: Checksum failure (expected=0x%x computed=0x%x)\r\n", dwChksum, dwCRC); return (dwCRC == dwChksum); } I don't know why? I think if ethernet transports wrong messages,it will show ethernet transport errors.But it does not show these messages.So I think ethernet transport is right.So where is wrong? Thanks. Tag: dot net cf updata Tag: 68846
  - 16
    - Hive Bades and Stratad.dll loading problem Hi, I am having a WinCE image with Binary Rom Image File System. Hive Based Registry. In fact, i am in the process of implementing Hive Based Registry. Here the way the i go, I added hive based registry. I understood that for Hive based registry the the FileStorage (File System) OS module to be included. So, i included stratad.dll in my pdd and made the registry entries as mentioned in WinCE 4.2 help and sample Lubbock BSP. Now, I am getting a error as follows. 4294770730 PID:a3ca3b46 TID:a3ca3b22 0x83ca38e4: >>> Loading module filesys.exe at address 0x04010000-0x0408C000 Loaded symbols for 'E:\WINCE420\PUBLIC\TEST_APPLICATION\RELDIR\TS90DEBUG\FILESYS.EXE' 4294770822 PID:a3ca3b46 TID:a3ca3b22 0x83ca38e4: FileSystem Starting - starting with clean file system 4294770871 PID:a3ca3b46 TID:a3ca3b22 0x83ca38e4: FSVOL: Opening existing volume 4294770902 PID:a3ca3b46 TID:a3ca3b22 0x83ca38e4: FSVOL: Volume heap already initialized 4294770934 PID:a3ca3b46 TID:a3ca3b22 0x83ca38e4: FSVOL: Initializing volume heap 4294771028 PID:a3ca3b46 TID:a3ca3b22 0x83ca38e4: FSVOL: Opening existing volume 4294771058 PID:a3ca3b46 TID:a3ca3b22 0x83ca38e4: FSVOL: Volume heap already initialized 4294771088 PID:a3ca3b46 TID:a3ca3b22 0x83ca38e4: FSREG: Mounting clean system hive 4294771118 PID:a3ca3b46 TID:a3ca3b22 0x83ca38e4: FSVOL: Creating new volume 4294771198 PID:a3ca3b46 TID:a3ca3b22 0x83ca38e4: FSVOL: Initializing volume heap 4294771271 PID:a3ca3b46 TID:a3ca3b22 0x83ca38e4: FSREG: Taking down boot registry. Any open keys will be invalid. 4294771409 PID:a3ca3b46 TID:a3ca3b22 0x83ca38e4: >>> Loading module fsdmgr.dll at address 0x03DC0000-0x03DDC000 (RW data at 0x01FED000-0x01FED754) Loaded symbols for 'E:\WINCE420\PUBLIC\TEST_APPLICATION\RELDIR\TS90DEBUG\FSDMGR.DLL' 4294771506 PID:a3ca3b46 TID:a3ca3b22 0x83ca38e4: >>> Loading module stratad.dll at address 0x03630000-0x03644000 (RW data at 0x01F8A000-0x01F8AAF4) Loaded symbols for 'E:\WINCE420\PUBLIC\TEST_APPLICATION\RELDIR\TS90DEBUG\STRATAD.DLL' 4294771556 PID:a3ca3b46 TID:a3ca3b22 0x83ca38e4: FMD_Init: SUCCESS 4294771584 PID:a3ca3b46 TID:a3ca3b22 0x83ca38e4: INFO: FMD_Init: Flash Address=0xb8380000 Length=0x1f80000. 4294771648 PID:a3ca3b46 TID:a3ca3b22 0x83ca38e4: FLASHDRV.DLL:BuildupMappingInfo() - Enter. 4294772692 PID:a3ca3b46 TID:a3ca3b22 0x83ca38e4: FLASHDRV.DLL:BuildupMappingInfo() - Unable to map logical sector 0x01a0a002 to physical sector 0x000007e1 4294773589 PID:a3ca3b46 TID:a3ca3b22 0x83ca38e4: FLASHDRV.DLL:BuildupMappingInfo() - Unable to map logical sector 0xe5850000 to physical sector 0x000007ea 14306 PID:a3ca3b46 TID:a3ca3b22 0x83ca38e4: FLASHDRV.DLL:BuildupMappingInfo() - Unable to map logical sector 0xb54702b8 to physical sector 0x00002d42 14410 PID:a3ca3b46 TID:a3ca3b22 0x83ca38e4: Could not find/load partition driver mspart.dll 15488 PID:a3ca3b46 TID:a3ca3b22 0x83ca38e4: CStore Destructor(000A2DE0) 16307 PID:a3ca3b46 TID:a3ca3b22 0x83ca38e4: <<< Unloading module stratad.dll at address 0x03630000-0x03644000 (RW data at 0x01F8A000-0x01F8AAF4) Unloaded symbols for 'E:\WINCE420\PUBLIC\TEST_APPLICATION\RELDIR\TS90DEBUG\STRATAD.DLL' 16413 PID:a3ca3b46 TID:a3ca3b22 0x83ca38e4: >>> Loading module relfsd.dll at address 0x03EF0000-0x03EFB000 (RW data at 0x01FF9000-0x01FF9ABC) Loaded symbols for 'E:\WINCE420\PUBLIC\TEST_APPLICATION\RELDIR\TS90DEBUG\RELFSD.DLL' 16570 PID:a3ca3b46 TID:3c7cf62 0x83c63790: Mounted ReleaseFSD volume '\Release' 16615 PID:a3ca3b46 TID:a3ca3b22 0x83ca38e4: FSREG: Logging in default user. 16643 PID:a3ca3b46 TID:a3ca3b22 0x83ca38e4: SetCurrentUser: Logging out (nobody), logging in default 16691 PID:a3ca3b46 TID:a3ca3b22 0x83ca38e4: FSVOL: Opening existing volume 16721 PID:a3ca3b46 TID:a3ca3b22 0x83ca38e4: FSVOL: Volume heap already initialized 16752 PID:a3ca3b46 TID:a3ca3b22 0x83ca38e4: FSVOL: Creating new volume Please don't say that this error is already asked in old queries. I couldn't understand how to solve this Hive based problem. Struck. Few questions, 1. Is it the stratad.dll to be made as PDD and added with the platfrom ? 2. File system is needed for Hive Based registry ? 3. I know how to build stratad.dll but, i couldn;t find a place where i can set Environment variable to load this using filesys.exe. FYI, I made registry entry "AUtoLoad". 4. Membase address also i verified its correct according to my Boot configuration. Please suugest me where i am doing wrong ? Thanks & Regards, Peter Tag: dot net cf updata Tag: 68844
  - 17
    - ActiveSync through ethernet only It seems that ActiveSync through etherne must use serial/USB/IrDA/Bluetooth to create partnership firstly. My question is that if my platform has only ethernet and no any serial/USB/IrDA/Bluetooth. Is there any way to create partnership manually, such as through modify registry or write application? Thanks in advance! Gordon Tag: dot net cf updata Tag: 68843
  - 18
    - VIA EPIA motherboards I'm looking at the VIA's EPIA mini-ITX line of embedded motherboards. Does anyone have any experience with them? Good, bad, indifference? Richard Rosenheim Tag: dot net cf updata Tag: 68841
  - 19
    - WinCE 5.0 Link File I am running WinCE5.0 and trying to autolaunch an application from \windows\startup using a LNK file. The file included in the LNK file is a BAT file in the flash file system. If I telnet to the device and execute \FFS\startup.bat, it will execute, but it does not run during powerup. We have just converted from WinCE4.2 to WinCE5.0 and this used to work. Nothing has changed in the system other than converting to WinCE5.0 and now the startup application does not launch. Here are the relavent file sections: platform.bib startup.lnk $(_TARGETPLATROOT)\FILES\startup.lnk NK SH platform.dat Directory("\Windows\Startup"):-File("startup.lnk","\Windows\startup.lnk") startup.lnk 18#"\FFS\startup.bat" Please advise, Thanks! Tag: dot net cf updata Tag: 68833
  - 20
    - ActiveSync /remote I run repllog.exe /remote and it pops up a window asking to choose a Connection Type and a PC to connect to, I click "Connect..." and it establishes the connection fine. The next screen is the Connection Status which gives you the option to "Sync Now" or "Disconnect", those both work as well, then there is the "Disconnect when complete" check box which, when checked, works if you actually click on "Sync Now". From what I can tell is that a sync happens when this window initially opens, then you can eiter disconnect or sync again. I need it to disconnect after that initial sync. Why does it force me to perform another sync before automatically disconnecting? I can't have any user intervention with this process. Anyone know why it doesn't disconnect after that first sync? Thanks. Tag: dot net cf updata Tag: 68831
  - 21
    - Automatic Sleep Hello anyone. How to configure wince 5.0 to go sleeping due to user inactivity? It seems that it is not enough to set timeout in registry: [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power\Timeouts] "ACSuspend"=dword:1E and to add "Power Manager (Full)" or "Power Manager (Minimal)". Of course I have OEMPowerOff implemented and working in my platform. Thanks. Tag: dot net cf updata Tag: 68824
  - 22
    - Can note re-install QFE's after re-installing Platform Builder I had installed the platform builder and installed the 2004 roll-up QFE's. I removed platform builder and re-installed it. Now when I try to apply the QFE's I get the error: "There is a problem with this Windows Installer package. A script required for this install to complete could not run. Contact your support personnel or package vendor" What registry settings did not get cleaned-up in the un-install of platform builder. I have tried a second un-install where I removed \HKCU\Software\Microsoft\Platform Builder\* \HKLM\Software\Microsoft\Windows CE Tools\* I re-installed platform builder and still get the message above when I try to install the QFE. -- Thanks Larry Tag: dot net cf updata Tag: 68822
  - 23
    - Change CPU frequency from WinCE (not bootloader) Hi all, In my bootloader CPU frequency is configured to 200MHz and it is no way to upgrade. Is it possible to change the frequency to 400MHz later, from the OS? WinCE 4.2, Platform based on Intel PXA 250 Startup banner: *******Beginning System Initialization******* SDCLK[1] = MemClk MemClk = 99.53 MHz Run Mode = 2 * MemClk Turbo Mode = Run Mode Mode: RUN -- Thanks, Andriy Hyba Tag: dot net cf updata Tag: 68814
  - 24
    - DEBUGMSG and FFUART enabled at the same time Hallo! I have two fully operational serial ports (FFUART and STUART) on my XSCALE-device. I can use both at the same time from my application. Now I would like to have one of my ports supporting the DEBUGMSG command. The only way I have managed to do this is by setting BSP_NOSERIAL=1 (no serial port) and BSP_DBGSER_UART1=1.This unfortunately disables all serial ports except the DEBUG-port. Debugg messages is displayed on my STUART. Why am I not able to enable one port for DEBUGMSG and FFUART for my application at the same time? Any idrea is welcome since I feel I have tried all possibilities! /trond Tag: dot net cf updata Tag: 68813
  - 25
    - setevent problem we have got 3 instances. one driver and two applications. ok setevent() is in the driver only. now there r two cases which have to be looked for ...... 1. if am passing the address of setevent() and waiting for that event (waitforsingleobject) in one single application or the same application. it is working fine . no problem..... the trouble comes in the 2nd case...... 2. passing the address of event and waiting for that event (waitforsinglrobject) in different thread and then seeting this event in driver in ISR. event is not trigerred ..... in the first point the event setting is happening in normal driver function not in ISR what can be the problem. .....?????? hope to get a reply soon... thnaks in advance Tag: dot net cf updata Tag: 68808
- Next
  - 1
    - not able to generate event from the driver i have a CAN driver and trying to generate an event from the driver but my setevent( ) is not setting any event . what can be the problem? Tag: dot net cf updata Tag: 68806
  - 2
    - where is eboot's ethernet download buffer? hello, this is ce 5.0, mainstoneii's eboot.bib i was placing my big data buffer in 80060000, which is GAP, reserved for future. and I found out that someone is using this space during image download. and it happen in the exact same time(well % of the download it is) if I move my data futher, then the download can go futher. seems it is the eboot downloading buffer. now I move my data to 83F00000 and everything works fine. but it is not a GOOD way to avoid problem, right? so can anyone tell me how to config the eboot download buffer? ; 8000.0000 -+ ; | Bootloader Stack (64KB) ; 8001.0000 -+ ; | Bootloader RAM (64KB) ; 8002.0000 -+ ; | Bootloader Code (256KB) ; 8006.0000 -+ ; | GAP (reserved for future) ; 800F.F000 -+ ; | ARGS (4KB) ; 8010.0000 -+ ; | ; | OS (NK) Code (48MB) ; | ; 8310.0000 -+ **auto-size** ; | ; | OS (NK) RAM (15MB) ; | ; 8400.0000 -+ ; ;****************************************************************************** MEMORY ; Name Start Size Type ; ------- -------- -------- ---- STACK 80000000 00010000 RESERVED RAM 80010000 00010000 RAM EBOOT 80020000 00040000 RAMIMAGE RSVD 80060000 0009F000 RESERVED ARGS 80FF0000 00001000 RESERVED CONFIG AUTOSIZE=OFF COMPRESSION=OFF PROFILE=OFF KERNELFIXUPS=ON ROMSTART=80020000 ROMWIDTH=32 ROMSIZE=00040000 ; The bootloader is fixed up to run from RAM, but is stored in flash. ROMOFFSET ; adjusts the .bin file record headers to that they lie in flash (this tells the ; bootloader already on the device to store the image in flash). ROMOFFSET=3C9E0000 MODULES ; Name Path Memory Type ; ------ ---------------------------------------------- ----------- nk.exe $(_TARGETPLATROOT)\target\$(_TGTCPU)\$(WINCEDEBUG)\eboot.exe EBOOT Tag: dot net cf updata Tag: 68803
  - 3
    - interrupt mode in eboot? did anybody enabled interrupt in eboot? I am using xscale 27x and pb 5.0 Tag: dot net cf updata Tag: 68794
  - 4
    - Localized versions of Windows Embedded DevWire newsletter Hello Windows Embedded enthusiasts: Just a short note to let you know that we've recently instituted localized versions of our Microsoft Windows Embedded DevWire newsletter. If you're not familiar with the DevWire, it's our monthly technical communiqué to professional and non-professional developers and business decision-makers with an interest in Windows Embedded. Aside from our worldwide English edition, the DevWire is now available in Korean, Japanese, Traditional Chinese, Simplified Chinese, and a second English version dedicated to our Indian audience. I invite you to subscribe to the DevWire or update your subscription to a localized version of your choice by visiting our subscription management page: http://msdn.microsoft.com/embedded/community/community/devwire/default.aspx Regards, -- Nick White Product Manager & Developer Community Lead Mobile and Embedded Devices Division Microsoft Corporation http://msdn.microsoft.com/mobility/community/ http://msdn.microsoft.com/embedded/community/ Do have an opinion on the effectiveness of Microsoft Windows Mobile and Embedded newsgroups? Let us know! https://www.windowsembeddedeval.com/community/newsgroups This posting is provided "AS IS" with no warranties, and confers no rights. Tag: dot net cf updata Tag: 68793
  - 5
    - Recommendations for a PAx277 CE5 Board? not Got a customer who requires SD RAM (SDIO is necessarily required) We are looking at using an XScale board with CE 5. We need to interface it to an I(squared) channel for external hw. We want a small footprint for the board. Cost is of course a consideration. Any suggestions? Thanks -- David Jones Senior Lecturer School of Electrical & Computer Engineering RMIT University +61 3 99255318 Tag: dot net cf updata Tag: 68791
  - 6
    - CE debugging very slow with HyperThread host I have a host pc that I am using for my PB development. (5.0) I find that if I enable HT in the BIOS, my debug process is very slow. If I disable HT in the BIOS, it seems to be normal speed. Is this expected? I would prefer to leave the HT on as it helps to enhance my overall development experiece. Thanks, Chuck Tag: dot net cf updata Tag: 68785
  - 7
    - command line build Can someone tell me how to build the dcom samples in the CCM folder for CE5 I can not find any info on how to build samples from the command line Thanks Ken Tag: dot net cf updata Tag: 68780
  - 8
    - USB & KITL Hi, I am successfully downloading images using eboot via ethernet with PB 5.0 connectivity options to download=ethernet transport=ethernet. However, I want to configure PB to use USB for KITL once the image is downloaded. So I configured PB 5.0 connectivity options to download=ethernet transport=USB. But then when "connect to device" is hit, I get errors "Failed to connect debug message service! Please check the transport settings.". I would have thought that PB would still wait for bootme and download the image and only attempt KITL (via USB) once the image has downloaded? Or am I missing what is happen here. Thanks, Stewart Tag: dot net cf updata Tag: 68772
  - 9
    - Problem with Flash Media Driver Hai All, I am working on a ARM based device with WinCE5.0 My board contains 32 MB onboard strata flash and 64MB SDRAM. My problem is a strange one, I hope so. I build Strata Flash Drivar sample available in PB. I am Succefully loaded my FMDriver and able to create a partition and format,read and write into it. This all happens, When I write the image into SDRAM. If I check the "write image to Flash" from PB build options I could able to load the driver, but Neither I can create partition nor format the flash. I can see the Flash media Object in storage manager application tool. If I try to format it, The device hangs. No further response. can anybody help in this regard? thanks in advance with regards Vijji Tag: dot net cf updata Tag: 68770
  - 10
    - MAPI in WINCE 4.2 or later? Is MAPI in WINCE 4.2 or later? If not what do I use instead to send email from an app. MsgStore is there with an app interface but I believe that became obsolete long ago. Tag: dot net cf updata Tag: 68767
  - 11
    - problem with CEPC Iam trying to download VOIP image into CEPC via ethernet connection. When iam trying to dial,iam getting the dial tone but IAam unable to make the call. It is giving the following message: "MEDIA SESSION DOES NOT EXIST" which is creating this problem??? Tag: dot net cf updata Tag: 68766
  - 12
    - Can't get to WWW Hello I used dial-up to connect the GPRS service. The GPRS module is a virtual COM port via USB. It connected to OTG device. It can get to connected state.But it can't link to WWW or MSN. If I switch module to the other USB host.(Not via OTG) It can dial-up and link to WWW. Did someone know about this problem? Thanks for help. Tag: dot net cf updata Tag: 68764
  - 13
    - Migrating WINCE 4.20 to WINCE 5.00 on OMAP1510 platorm Hi All I am o trying to migrate BSP for Windows CE 4.20 to Windows CE 5.0 on Innovator OMAP1510 HW platform. I am also facing the same problem as the the one Vadivel described in the discussion forum in his post With WINCE4.2 image is coming perfectly with the BSP,same BSP I used after incorporating changes as per microsoft help http://msdn.microsoft.com/library/default.asp?url=/library/en-us/wcehardware5/html/wce50conbspanddrivermigration.asp I have followed the steps for migrating BSP from 4.2 to 5.0,but I built the image using Macallan and try to down load the image into OMAP1510 hardware I. found after putting couple debug statements ("<Drive name>:\WINCE500\Private\WINCEOS\COREOS\NK\KERNEL\schedule.c" and Drive name>:\WINCE500\Private\WINCEOS\COREOS\NK\KERNEL\kwin32.c") it is not able to execute fitst thread It means not going to SystemStartupFunc() Pls see the debug list 1 I tested timer ISR which is responsible for system tick by putting debug statements in OEMInterruptHandler(in Intc of BSP) and SysTimerInterruptHandler( Ter.cp of BSP) functions and it is working fine . I am attaching the debug output from serial output below. pls see the DEBUGLIST II DEBUGLIST I Ethernet Boot-Loader for the Texas Instruments OMAP EVM. Build date: Nov 14 2002 at 12:23:53 Copyright (c) 2000 - 2002, Texas Instruments, Inc. Portions copyright (c) 1995-2000 Microsoft Corporation. EBOOT: Moving exception handlers from 0x84014DFC to 0x8802D000. EBOOT: Calling OEMInit. EBOOT: Initializing LAN9000 hardware. +SMCInit SMC card not detected, I/O base 0xA2000300, BSR: 0x0000FFFF EBOOT: Could not find LAN9000 hardware. EBOOT: Jumping directly to 0x40000 EBOOT: Jumping to image at 0x40000... EBOOT: Leaving main(). OEMInitDebugSerial: KITL initialization failed. Windows CE Kernel for ARM (Thumb Enabled) Built on May 16 2005 at 16:56:07 ProcessorType=0925 Revision=2 sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 80041038 RelocInit: Relocating 580 bytes of SDRAM functions. RelocInit: Relocating 184 bytes of ISRAM functions. g_pSetEMIFFastRegs=0xa802f004. OEMInit is done!!! by Vadivel Booting Windows CE version 5.00 for (ARM) Booting kernel with existing memory configuration: Memory Sections: [0] : start: 84070000, extension: 00002000, length: 01d8e000 Sp=ffffc7cc ARMInit done. SchdInit....Starts.....(!@#$%^&*)... Scheduler: Start openexecutable 'nk.exe' ldr:OpenExe: nk.exe OpenExecutable: Filesys not loaded, Opening from ROM OpenFileFromROM:found ldr: OpenExecutable is done Updated eptr->e32_vsize to = 00048000 Scheduler: openexecutable 'nk.exe' sucess Scheduler: dovirtualAlloc is done Sched: pStak:c2010000, pCurProc->e32.e32_stackmax :00010000 MDCT: MDCreateThread starts.. MDCT: MDCreateThread end.. DEBUGLIST II Ethernet Boot-Loader for the Texas Instruments OMAP EVM. Build date: Nov 14 2002 at 12:23:53 Copyright (c) 2000 - 2002, Texas Instruments, Inc. Portions copyright (c) 1995-2000 Microsoft Corporation. EBOOT: Moving exception handlers from 0x84014DFC to 0x8802D000. EBOOT: Calling OEMInit. EBOOT: Initializing LAN9000 hardware. +SMCInit SMC card not detected, I/O base 0xA2000300, BSR: 0x0000FFFF EBOOT: Could not find LAN9000 hardware. EBOOT: Jumping directly to 0x40000 EBOOT: Jumping to image at 0x40000... EBOOT: Leaving main(). Windows CE Kernel for ARM (Thumb Enabled) Built on May 6 2005 at 15:26:11 ProcessorType=0925 Revision=2 sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 80041038 RelocInit: Relocating 580 bytes of SDRAM functions. RelocInit: Relocating 184 bytes of ISRAM functions. g_pSetEMIFFastRegs=0xa802f004. OEMInit is done!!! by Vadivel Booting Windows CE version 5.00 for (ARM) Booting kernel with existing memory configuration: Memory Sections: [0] : start: 84070000, extension: 00002000, length: 01d8e000 Sp=ffffc7cc ARMInit done. Intc: OEMInterruptHandler(): ~~...INTC_IRQ_TIMER1...~~ = Timer: !fIntrTime Timer: SysTimerInterruptHandler done.. Intc: OEMInterruptHandler(): ~~...INTC_IRQ_TIMER1...~~ = Timer: !fIntrTime Timer: SysTimerInterruptHandler done.. Intc: OEMInterruptHandler(): ~~...INTC_IRQ_TIMER1...~~ = Timer: !fIntrTime Timer: SysTimerInterruptHandler done.. Intc: OEMInterruptHandler(): ~~...INTC_IRQ_TIMER1...~~ = Timer: !fIntrTime Tag: dot net cf updata Tag: 68763
  - 14
    - WinCE buid process Hi all, The Cebuild.bat will perform build and sysgen for all the trees specified by the _DEPTREES environment variable . The sysgen is performed twice , known as 'preproc sysgen' and 'postproc sysgen' for each tree . I couldn't understand what happens in these two stages . Can anybody help me out in this . Thanks and Regards, Vidya Udupa. Tag: dot net cf updata Tag: 68758
  - 15
    - CEPC stuck at DHCP Hi all, I tried to create a CEPC platform based on an old Pentium 3 PC with a 3Com 3c90x Ethernet interface. I had used the CEPCBOOT.144 utility to create the boot diskette. The PC was booted up with the default config.sys/autoexec.bat options. The ethernet interface was correctly identified by loadcepc as a 3Com 3c90x ethernet interface but eboot.bin failed in trying to obtain an IP address via DHCP with the message: ProcessDHCP()::DHCP_INIT I sniffed the ethernet interface to verify that the CEPC was not sending out any packets at all. I had also tried to assign a static IP address to see if the CEPC would contact my development machine with BOOTME requests. Again, I did not detect any packets coming from the CEPC. Does anyone know what could be the problem? Tag: dot net cf updata Tag: 68755
  - 16
    - routing audio in bluetooth what things i've to do in " windows-CE platform builder" to build a operating system that will be able to route audio on ECM_5616 board ? if you cann't answer specificaly about this board(ecm),please sugest about the general way to write a application which can do audio routing for bluetooth in windows ce Tag: dot net cf updata Tag: 68754
  - 17
    - audio routing in bluetooth what things i've to do in " windows-CE platform builder" to build a operating system that will be able to route audio on ECM_5616 board ? if you cann't answer specificaly about this board(ecm),please sugest about the general way to write a application which can do audio routing for bluetooth in windows ce Tag: dot net cf updata Tag: 68753
  - 18
    - Audio problem in VOIP application we have INTEL ECM 5616 board and we included Intel 81XAC97 audio driver. We downloaded the VOIP application to the board via serial port. We are able to make the call from emulator to Board but audio in ECM receiver is playing fast and the board is not at all transmitting the audio. Thank u... Tag: dot net cf updata Tag: 68750
  - 19
    - Driver Load Sequence Hi, I need to dynamically load and un-load drivers from Platform Builder to deal with a problem that i have explained below. Can someone tell me how to do any of these two things: 1- Tell WinCE to load my ftdi_ser.dll (a third party dll for ftdiâ??s serial over USB chip) after loading every other dll at boot time. (note platform.reg "order" doenst work in this case). 2- Un-load and re-load the ftdi_ser.dll after completion of the boot up either from the Platform Builder environment or programmatically. The problem is that the ftdi-ser.dll driver behaves differently if WinCE is started with the external ftdi device attached to the USB port: Normal operation: If I boot up WinCE and then plug in a serial over usb device into the WinCE deviceâ??s USB port, the external device is detected by the OHCI.dll and its driver FTDI_SER.DLL gets loaded after Wince loads the OHCI.dll and it then operates normally i.e. I can plug the device in and then un-plug the device and re-plug and re-establish serial comms over the USB all normally. Abnormal operation: If I boot up WinCE with the external USB device attached to the USB port already, the FTDI_SER.DLL still gets loaded but USB doesnâ??t function also the FTDI+_SER.DLL does not get un-loaded when I detach the external device from the USB port. There are also other symptoms, in the registry viewer i can see under /Drivers/Builtin/Active that the FTDI_SER.DLL doesnâ??t get un-loaded and re-enumerated as it is the case under Normal Operation. As a solution, I must tell WinCE to load FTDI_SER.DLL after loading all other dlls. Or as a workaround I could get WinCE to un-load the FTDI_SER.dll after loading all the dlls and then re-load it again. Thanks and regards, EZ Tag: dot net cf updata Tag: 68745
  - 20
    - NDISWAN IM Driver Hi, I'm trying to debug an NDIS IM driver that binds to the AsyncMac miniport. (I know, I know, MS doesn't support this, etc.) When I compile the driver in eVC, it links just fine. When I compile it under Platform Builder 4.2, I get a link error - it can't link with the export function WanMiniportSend that is defined in ndis.h. Can anyone tell me what I have to do in Platform Builder to link to this function? Tag: dot net cf updata Tag: 68735
  - 21
    - How to convert absolute mouse coordinates to normal positions relative a window? Hi, I´m trying to prevent some mouse messages to be forwarded to some applications, but the mouse driver gives me the absolute mouse coordinates. How could I convert them to screen coordinates? Thanks for helping me out, Dani Tag: dot net cf updata Tag: 68729
  - 22
    - CE 5.0 Defrag tool Whenever I run the CE 5.0 Defrag tool on an IDE drive (256 MB CF), it never completes and must be aborted by closing the Defrag window. When I subsequently run scandisk on the drive, it finds numerous Invalid files and Lost cluster chains. Is there a bug in the defrag tool (one has been reported for scandisk)? Is the drive too big or incompatible? I would appreciate hearing from others who use these tools. Thanks Tag: dot net cf updata Tag: 68708
  - 23
    - StorageManager Flags I am interested in the effect of various Storage Manager flag settings and have searched for documentation in PB and on-line. The only description that I can find for them are comments in Common.reg and they tend to be quite terse. Does anyone know where to find more complete documentation? If not, has anyone used the FATFS_VERIFY_WRITES flag setting? We have experienced occasional compact flash file corruptions and wonder if setting this would improve things. I assume that this setting would force file verification on writes but it is not clear how much time this would add or what would happen if verification failed. Tag: dot net cf updata Tag: 68700
  - 24
    - Cesysgen.bat question Hi, In PB4.1 the cesysgen.bat file in PROJECTROOT\Oak\Misc was big with lots of checks on what SYSGEN_xxx variables were set. Now in PB 5.0 all this file contains is call PUBLICROOT\cebase\oak\misc\cesysgen.bat which does not have all the settings the cesysgen.bat file in 4.1 had. Where have all these checks been moved? Regards ms Tag: dot net cf updata Tag: 68698
  - 25
    - How to Connect PXA255 pin to Harddisk pin with DMA mode hi,all I have implement communication between PXA255 and Harddisk with IO mode, but I find the data flow speed of the communication between PXA255 and Harddisk with IO mode is too slow, I would like to implement communication between PXA255 and Harddisk with DMA mode£¬At the same time I meet a problem, I find that the PXA255 only have the DMA Request Pin and lack the DMA acknowledged Pin in accordance with the Harddisk Acknowledged Pin. who can tell me how to simulate the DMA acknowledged Pin and how to simulate the DMA acknowledged Pin. thanks in advance Tag: dot net cf updata Tag: 68697

how can updata dot net CF to sp2 and where can download it ?

Re: dot net cf updata by Paul

Paul
Tue May 31 12:30:33 CDT 2005

Download and install *all* of the QFEs for the version of Windows CE.NET
that you are building. You can find them at www.microsoft.com/downloads, by
entering the following search terms:

"windows ce" qfe 4.2

Obviously, if you are using 4.1, use 4.1, not 4.2. that should give you a
list. Sort them by date and install the oldest one first, moving forward in
time until you've installed them all. At that point, you'll have .NET CF
1.0SP3 (not SP2), which is the latest.

Paul T.

"ukas" <ukas01@ukash.com> wrote in message
news:ez2AqzbZFHA.2520@TK2MSFTNGP09.phx.gbl...
> how can updata dot net CF to sp2 and where can download it ?
>

Top