How to transfer the debug messages to EVC through activesync,not K

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - How to create activesync partnership via LAN? Hi, I want to use activesync via LAN by enter command "repllog.exe /remote", but it need to create the partnership first. Now I use usb cable to create the partnership. I don't know how to create activesync partnership via LAN? Fred Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62290
  - 2
    - WINCE 5.0 + EHCI + WLAN Hi. I'm going to support Philips ISP1760 on my PXA270 based platform (Win CE 5.0). Does anybody know about any exesting solutions for ISP1760? Also are there any samples on implementing EHCI for Wince 5.0? I found only EHCI mdd and one EHCI pdd in the PUBLIC/COMMON/OAK/DRIVERS/USB and absolutely no info which controller is supported by the EHCI pdd? Does anybody managed to get working EHCI + WinCE 5.0? Any issues? Where I have to start (any docs/reference/etc) to implement EHCI + WLAN? Thanks. Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62289
  - 3
    - display driver building in platform builder 5.0, mainstoneii bsp well, i couldn't find which source file is used to build the pxa27x_lcd.dll??? i have to modify the code but i don't want to mess with the orginal codes. all i can find is C:\WINCE500\PUBLIC\COMMON\OAK\CSP\ARM\INTEL\PXA27X\DISPLAY\PXA27X_LCD which is a lib. not a dll. any help? Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62288
  - 4
    - CS8900 driver We are using CS8900 driver for our project SMDK2410(downloaded from their website).The first time it is good,but cs8900 driver will halt after work a while ,drivers is use the driver inside of SMDK2410 BSP,how can i settle the problem ! Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62279
  - 5
    - How to use speech recognition functionality in window ce.net 4.2 Dear all, I have successfully created Windows CE.NET 4.2 OS Image for Thin Client. I have configured ICA Client as well as Touch Screen Functionality. Now i a requirement to upgrade the image and include Speech Recognition Functionality. I have seen that Windows CE.NET 4.2 catalog does have a speech recognition facitlity. It has 1. Microsoft English(US) V6.0 Speech Recognizer 2. Speech API(SAPI) 5.0 I want to take only numeric input as voice. i.e. 0-9. I want this inputs to be passed to a Visual Basic 6.0 application and finally placed in a text box. How should i use this? Please guide me Thank you, Cheers, Vinay Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62278
  - 6
    - About Panel Hi all, We are using WinCE420 and GeodeGX1 Platform. For display, we are using PD064Vt2T1 panel(PrimeView). Resolution of this panel is 640x480. We have a problem. Resolution 640x480 is displayed incorrectly. |-----------------------------------| (display region) ----|---------------------------- | | | | | | | | | | | | | | | | | | |___________________ |_____| |______________________| (Sreen region) But, 800x600 is displayed correctly. So, We have tried to chanege Hblankstart, HSyncstart,... and so on in gfx_disp.c. The above is a part of original sample source. FIXEDTIMINGS FixedParams[] = { /* 640x480 Panel */ /*resx, resy, xres, yres*/ { 640 , 480, 640, 480, /*hactive, hblankstart, hsyncstart, hsyncend, hblankend, htotal*/ 0x0280, 0x280, 0x2a8, 0x328, 0x380, 0x380, /*vactive, vblankstart, vsyncstart, vsyncend, vblankend, vtotal*/ 0x1e0, 0x1e0, 0x1e1, 0x1e5, 0x1fc, 0x1fc, /*frequency*/ 0x00192CCC, }, I don't understand why 640x480 is displayed incorrectly. If you allow, would you like to advice about issue? Thanks. Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62275
  - 7
    - File sharing in WinCE5.0 Hi, For purely anonymous access you can set the following registry key in WinCE 4.2. [HKEY_LOCAL_MACHINE\Services\Smbserver\Shares] "NoSecurity"=dword:1 But, in WinCE 5.0 use "UseAuthentication=dword:0" not to take effect. Please tell me why. Thanks!! Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62274
  - 8
    - Realtek ALC202A Audio Driver Hello...Steve Maillet Could you please kindly tell me where to download ALC202A driver for WINCE.NET 4.2? Besides, I've found hw_ac97.cpp in Ensoniq ES1371(Unified). Can I modify it to make ALC202A to work? but how? is there any document? thank you a lot. BR Jackson Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62273
  - 9
    - PB 4.2 How to set Control panel owner Network ID username/password I want every target to have the same network ID username/password but I don't want to set it in the control panel of each one. What registry keys do I need to set for Network ID User Name and Password in the platform.reg file? Thanks, Mike Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62269
  - 10
    - Checksum failure when program image to the flash Hi, All I modified config.bib to program nk.bin to the flash. But I got checksum failure when eboot starts downloading the image. The error msg is: ****** OEMVerfyMemory checking physical range [0x80000==>0xE16627]... ****** FLASH Address ****** ERROR: Checksum failure (expected=0x2EB computed = 0x2C6) *******Checksum failure on record 1, ABORT!!! ****** The config.bib is as follows, the platform is PXA27x WinCE5.0. Did I miss out anything? MEMORY ; Name Start Size Type ; ------- -------- -------- ---- RSVD 80000000 000FF000 RESERVED ARGS 800FF000 00001000 RESERVED NK 9CA80000 01000000 RAMIMAGE RAM 80100000 03F00000 RAM ; Reserve ZBANK virtual block (No physical memory ; is required to back this virtual range). ; ZBANK 96500000 00100000 RESERVED CONFIG ROMSTART=9CA80000 ROMSIZE=01000000 ROMWIDTH=32 AUTOSIZE=OFF KERNELFIXUPS=ON Thanks a lot in advance Tang Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62267
  - 11
    - CeRunAppAtEvent and SetSystemTime question Hello, I'm writing a device driver for a Real Time Clock (RTC) on a I2C bus attached to the processor. I'm using WinCE 4.2. I have my device drivers for the I2C and RTC working fine but I have one intergration issue that I'm getting stuck on: I need to have SetSystemTime() write the time to the RTC on the I2C bus anytime the system time is changed by the user. I'm trying to use the notification event, NOTIFICATION_EVENT_TIME_CHANGE, for this purpose. However, I'm having trouble registering the event and I'm hoping someone can help me. My basic approach is that in n my drivers RTC_Init() routine, I spin off a thread to keep the RTC in sync. Then the thread will create a named event and call CeRunAppAtEvent with that named event. Then whenever the SetSystemTime() call is made, my event should be triggered. The beginning of my thread looks like: // Create a named event for notification aheEvents[SYNC_TIME_CHANGE_EVENT] = CreateEvent( NULL // ignored ,FALSE // not manual reset ,FALSE // not signaled ,TEXT("RTCSync") ); if( NULL == aheEvents[SYNC_TIME_CHANGE_EVENT] ) { RTCMSG( ZONE_INIT | ZONE_ERROR | ZONE_WARN ,(TEXT("SyncRtcTime: Error: Couldn't create event (0x%08x) (line:%d)\r\n") ,GetLastError() ,__LINE__ ) ); return( -1 ); } // Make sure that the GDI is ready before we try to call CeRunAppAtEvent() // otherwise we'll get an exception while( !IsAPIReady( SH_GDI ) && !IsAPIReady( SH_WMGR) ) ; // Set the notification to signal the named event bRet = CeRunAppAtEvent( TEXT("\\\\.\\Notifications\\NamedEvents\\RTCSync") ,NOTIFICATION_EVENT_TIME_CHANGE ); if( !bRet ) { RTCMSG( ZONE_INIT | ZONE_ERROR | ZONE_WARN ,(TEXT("SyncRtcTime: Error: Couldn't setup notification (0x%08x) (line:%d)\r\n") ,GetLastError() ,__LINE__ ) ); CloseHandle( aheEvents[SYNC_TIME_CHANGE_EVENT] ); return( -1 ); } In theory I think this should work. However, I get the following error messages when the thread runs: 4294773052 PID:41b53526 TID:81b8423e 0x81b84000: NOTIFICATION::XCeRunAppAtEvent 4294773054 PID:41b53526 TID:81b8423e 0x81b84000: ERROR in NOTIFICATION::XCeRunAppAtEvent::Notification subsystem not yet initialized 4294773063 PID:1bca15e TID:81b8423e 0x81b84000: SyncRtcTime: Error: Couldn't setup notification (0x0000041d) (line:2620) So I think my problem is that I'm trying to call these functions before the notification system is running. I can't find any documentation on when it's ok to call these functions. Can anyone help me either with documentation on the notification system used in CE 4.2 or suggest another approach to solving my problem. thanks, Jeff Cooper jeffc at logicpd dot com Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62266
  - 12
    - Microsoft FMD in WinCE 5.0? Does WinCE 5.0 Microsoft's Flash Media Driver (FMD) implement any sort of wear-leveling algorithm? If so, are there any performance/lifecycle data available? For example, I need to write a 1 Mbytes file every 1 hour to my FLASH memory - ideally as just a FAT file. How long will my FLASH last until it ceases to erase? I plan to use NOR FLASH. Or do I have to use something like Datalight FlashFX Pro, or Intel PSM (or worse, implement my own block driver)? My application actually requires a FIFO-type logging of data where a fixed buffer is dedicated, keeping only the last 1 MB of data. Thanks Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62263
  - 13
    - Automatic Memory Sizing - CEPC/CE 4.2 Hi, I would like to have a single platform for a custom CEPC that would automatically detect the amount of memory available. I have one configuration with 256 meg of RAM and another with 128 meg. I've read posts and docs on AUTOSIZE but it appears that its main purpose is to adjust the boundary between RAMIMAGE and RAM. Is there a convenient way to do what I'd like? Thanks, Jim Frazer Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62261
  - 14
    - DMA on a PXA255 I am debugging an audio driver on a PXA255 based system that uses the I2S unit to perform playback of a WAV file. When setting up the DMA descriptors for a transfer of audio data out the I2S Unit there are some addresses which are required: Word 0: DDADRx (DMA Descriptor Address Register) Points to the next four word descriptor. Word 1: DSADRx (DMA Source Address Register) Word 2: DTADRx (DMA Target Address Register) Word 3: DCMDx (DMA Command Register) Do the addresses provided have to be PHYSICAL or UNCACHED_VIRTUAL (since the driver is executing under the device manager)? Does the address in the DTADRx have to be the address of the I2S unit SADR register? (Which would be Physical 0x4040_0080, Virtual whatever). The address in the DSADRx is the address of the actual data, but is it a Physical or Virtual address? Thanks for the help! Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62260
  - 15
    - WinPcap on WinCE 4.2 or 5.x? Hi folks, Has anyone attempted to bring the WinCE port of WinPcap (at the bottom of http://winpcap.polito.it/install/default.htm under "WinPcap for Windows CE") forward to either 4.2 or 5.0? It was originally done for WinCE 3.0, and supposedly worked (I don't have any 3.0 devices to try atm) I've got the driver, pcap lib, and a sample app building and running, but so far I'm not seeing any data from the interface I'm trying to snoop (and I'm not by any stretch of imagination an NDIS guy, so from here on out it's slow going). I'm slowly working my way through it, but wondering if anyone's gone down this road before and has any pointers (up to and including "you're wasting your time" or "there's a better way to capture packets on a WinCE device"). Where I am atm: PKTRead() in the pktdrv's read.c is constantly falling through at "not enough buffered packets", even when I've definitely got traffic going to and from the device's NIC. Thanks for any hints, -- Brian Bender Vocollect, Inc. Pittsburgh, PA, USA Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62259
  - 16
    - Please help me! Urgent! Hi. Will the BSP compiled with PB 5.0 (Build 1400) work for PB 5.0 (Build 1371)? Platform is XScale PXA270 (uses WINCE500\PLATFORM\COMMON\SRC\ARM\INTEL\PXA27X\ Platform/Common/SRC/ and WINCE500\PUBLIC\COMMON\OAK\CSP\ARM\INTEL\PXA27X\ libraries) Thanks Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62256
  - 17
    - two keyboard drivers Hi. Is it any way to have two keyboard drivers working in the same time. For example if device has built-in simple keyboard and also provides a way to attach full featured USB keyboard. In this case USB keyboard will be connected through USBClient driver, but will it function together with a driver for built-in keyboard? Thanks Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62245
  - 18
    - does ce 5.0 kitl use an interrupt? i am working on mainstone based board and i am looking for kitl interrupt handler. seems the sysintr_ether is gone now so how does kitl get it's own interrupt? Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62242
  - 19
    - Native Wi-Fi and RTL8180 chipset I recently purchased an 802.11b PCMCIA card with a Realtek 8180 chipset. I used PB 5.0 to build an OS image for a VIA mainboard (using VIA's recently published BSP), then added Native Wi-Fi STA (SYSGEN_NWIFI_STA), Wireless LAN STA (SYSGEN_ETH_80211) and the RTL8180 Native Wi-Fi STA to the image. Upon booting the card seems to get correctly recognized. At least the Zero Configuration Wizard for RTL8081_NWIFI pops up and I can enter the necessary settings such as SSID and WEP key. However, the card refuses to connect. I have tried with and without encryption but it fails to connect every time. Do I need some additional driver or am I missing something else that's obvious? Thanks in advance, August Ludviksson Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62241
  - 20
    - Platform Builder Evaluation Edition Hi All, Where Can I download Platform Builder 3.0 Evaluation Edition? I need it for my project, thanks in advance. Best Regards Posco Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62240
  - 21
    - OEMIoControl: Unsupported Code 0x101008c - device 0x0101 func 35 after my platform botted, debugger popped up and ask for locale.c. and i don't have it. seems like i am missing a feature in my project? how can i know what do these io control code means... OEMIoControl: Unsupported Code 0x101008c - device 0x0101 func 35 OEMIoControl: Unsupported Code 0x10100d0 - device 0x0101 func 52 OEMIoControl: Unsupported Code 0x10100f8 - device 0x0101 func 62 Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62237
  - 22
    - Some questions about CEC files in PB 4.20 and 5.0? 1. In PB 4.20, I uaually use a CEC file to create a feature. I can define Pre-Make image and Post-Make actions for a "feature". My colleagues can use the CEC file to add the same feature in their computer easily. However, in PB 5.0, the Pre-Make image and Post-Make actions are platform-setting-dependent so that I can not define Pre-Make image and Post-Make actions for a "feature". I must add these actions in the platform setting manually. Unfortunately, when I transfer these features to my colleagues, they must add these features and do what I do manually. It's annoying. How to define Pre-Make image and Post-Make actions for a "feature" in PB 5.0? (I have tried to add these actions in PostMakeImg.bat automatically, but this file will be deleted after running "Build OS"-->"Copy files to Release Directory".) 2. I find that, if I copy some files to the release directory, these files will be deleted when I run "Build OS"-->"Copy files to Release Directory". How to keep these files alive after running "Build OS"-->"Copy files to Release Directory" ? 3. If I copy some files to the release directory and these files exist, it said "This file is in use.". Why? Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62236
  - 23
    - USB Kitl does not work. I have coded USB Kitl for our device in Magneto and it does not work. KitlInit(TRUE) does not return FALSE but below messages appears. -- Invalid configuration data 0x000000FF Unable to initialize Serial KITL Transports! Active KITL initialization failed -- First message may not be related to this problem and 2nd 3th message I didn't put in code and OS seems to make this message occurs. And what I am implementing is USB Kitl and why serial kitl in message? I have no idea where to start and please let me know how to solve this problem. Thanks. Follow-up is limited to microsoft.public.windowsce.platbuilder -- Remove .n0zpam to send e-mail to me Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62232
  - 24
    - HardDisk load failure on CEPC with Intel 865GV hi, I had built a system on PB5.0 with Harddisk and FAT file system .It is all right with the file system when I use the intel810 motherboard.When I download the same system to the intel865G motherboard,it is can't work with the harddisk.I found some errors in debuging process.The controller return the status is 0xFF in th e function ResetController() of The diskmain.cpp file Regards, Albert Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62231
  - 25
    - Ethernet Download Hi everyone, Wish u all a happy, prosperous, cheerful and funfilled 2005 firstly. Well, I have a problem in downloading the OS image to the target machine. On the development workstation, I open the configure remote settings and give ethernet. On the target machine I put the boot floppy and boot the machine. After a few seconds the target machine reads "Jumping to A8F021". The target machine's ip address is not displayed. What could be the problem. I use a "RealTek RTL8139 Family PCI Fast Ethernet NIC" card for my ethernet downlaod. I give the NET_IRQ as 0 and NET_IOBASE as 0 and leave the NET_ADDRESS blank. Can anyone pls suggest what could be the problem. I am using PB4.2 Thanks, Cheers, Lakshmanan Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62225
- Next
  - 1
    - ALC202A Driver for WINCE.NET 4.2 Hello there~ Does anyone here know where I can get ALC202A Audio Driver for WinCE.NET 4.2?Please kindly help !!Thank you a lot.... Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62224
  - 2
    - Wireless UI The "Wireless UI" does not implement in function AdapterIPProperties (\Netui\network.c). But the CE 5.0 document always says "Implements the IP Properties dialog box that is displayed in the network connections UI that allows users to configure IP addressing, DNS/WINS information, and wireless local area network (LAN) settings." What's the problem? Bryan. Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62222
  - 3
    - Kernel Debugging in PB 5.0 beta Hello, Is it possible to step through WMGR or GDI functions like CreateWindowEx, DrawText and ExtDrawText? I Enabled Kernel Debugging but I can not open the kernel source code, it has only stub.cpp file! Any help is greatly appreciated Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62215
  - 4
    - Develop a win USB application to download image? I want to develop a win32 application (use VC++ or BCB)to download image to PXA25X via USB, Do I need to develop a USB driver or use the default driver by the win2000? I found that the Samsung provided a "DNW" tool to download image to 2410.Is there any same one provided by Intel? Any suggestion is appreciated. Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62211
  - 5
    - D3DM err Hi, I have Sandgate II-G (PXA270+2700G) and CE5.0. Now I try to add Direct3DMobile in the CE image. When I execute the D3DM sample code from Microsoft, the call CreateDevice fails with return value D3DMERR_INVALIDDEVICE. That reads the hook can't find according to MS doc. Anyone here experiences similar situation with D3DM? Regards, Mark Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62210
  - 6
    - magic packet reception Hi All, os -Wince4.2 BSP -VIACEPC I am trying to implement Wake On LAN using VT3065 NIC ...I have got a driver for the same .. how do I extract ethernet address from incoming data from the n/w?..Should I communicate with protocol driver or can i directly go for NDIS functions...Can anyone give me a slice of code to implement the reception of magic packet...Is there any sample files in PB which I can use a reference? Can I use files under public\COMMON\OAK\DRIVERS\NETSAMP\PASSTHRU as a reference code? Any suggestions /Links will be greatly appreciated.. Thanks in Advance, Johns Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62207
  - 7
    - drm in windows ce.net 4.2 I'm wondering when I install microsoft drm 7.1 and whether I use the individualized certificate or generic certificate, everytime I try to play a drm'd video/audio file I get this error: You need a license to perform the requested operation on this media file. (0xc00d0bbe) What is causing this error? Am I missing a component in the platform builder? Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62205
  - 8
    - NewPlatformWizard XML file Hi, I am creating a new platform wizard XML file and need to preset some build environment variables. Within the DefaultSettings section of the XML file, I am using the following syntax and it doesn't seem to work. <BuildEnvVar Name="INCLUDE_ME" Value="1" /> What am I doing wrong? Thanks in advance. Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62201
  - 9
    - PQOAL PCI BusID vs Bus Number Problem The OALxxx PCI routines (e.g. OALPCICfgWrite) all take a BusID parameter, in addition to the regular PCI location address. There is no documentation on the parameters, but the bus ID appears to be intended for additional PCI interfaces, while the bus portion of the PCI address defines secondary buses behind a PCI bridge. In most cases, the BusID parameter would be zero, unless there were multiple host bridges in the system. However, the CEDDK functions (HalGetBusData etc) don't have a BusId parameter, this is apparently something new that was defined with the PQOAL. The CEDDK maps calls to the HalXXX functions to IOCTL_HAL_DDK_CALL, and from there on to the OAL functions. However, the BusID parameter needs to be set, so the PQOAL fills in this parameter with the PCI bus number. Unfortunately, the OAL sees calls for secondary buses as calls for buses on another interface. Obviously, the cpu dependent code can ignore the BusID parameter and just use the PCI device location for any system that has only one host interface. Questions: - What is the purpose of the BusID parameter in the PQOAL routines, and how is it different from the bus portion of the address? - If there are multiple interfaces (multiple host buses) how are they supposed to be differentiated in calls to the CEDDK configuration routines? Any other thoughts on this? -- Dean Ramsier - eMVP Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62200
  - 10
    - Failed executing Command Processor Commands Hi all, I am using winCE 4.2 Platform Builder When I try to excute Standard shell command in the Target Control window: Windows CE>s cmd /K TIME I got the following in the Debug window: Loaded symbols for '...\CMD.EXE' Console NOT redirected for process 0x42 ObjectCall: Failed(2): h=ffffffff Invalid handle: Set=7 Method=3 MessageBox - Customizeable <<< Unload module cmd.exe at address 0x0E010000-0x0E02B00 Unloaded symbols for '...\CMD.EXE' In the Target Process window, shell.exe appears in the list Do I need to set up anything else to run the Command processor commands Thanks in advance for any help. RH Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62199
  - 11
    - How to add my dll to platform? Hi, I have a dll (usb driver) created via an existing evc++ project. Looks like PB wants me to create a new platform builder dll project (pbp); but then I'd have to somehow migrate my existing evc++ project over. Can I just somehow point PB at the dll I've already built? What about the associated registry keys? I also was reading in the help files that a "Catalog Feature File" (.cec) might be another approach. I guess I really want to know: What's the 'right' thing to do here? Thanks much! Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62194
  - 12
    - Releasing a WCE Image I've created a personallized WCE image for using in a CEPC. But I didn't acquire PlatBuilder licence, because I did all my work within the 3 month trial period. Obviously I'll pay for each one of WCE in my product, but do I still need to buy PlatBuilder licence, in order to release them? Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62192
  - 13
    - Slave disk in IDE2 not detected Hi, Please help me!! I'm still struggling with this problem. The embedded PC has a CompactFlash disk connected to IDE 2 as SLAVE (this is hard-wired). In Debug, the disk is detected, but in Release not. Here are some messages in Release (I added RETAILMSG for these to show up in Release). Release: 1050 PID:83f926ee TID:83f9b4aa Atapi!IDE_Init> End of IDE/ATA device enumeration 1050 PID:83f926ee TID:83f9b4aa Atapi!IDE_Init> Activating IDE/ATA device Drivers\BuiltIn\PCI\Instance\ALI14531\Device0 1057 PID:83f926ee TID:83f9b4aa Atapi!CDisk::IsDevicePresent> Device 0 is not present; Error register(0x20) 1057 PID:83f926ee TID:83f9b4aa Atapi!IDE_Init> Activating IDE/ATA device Drivers\BuiltIn\PCI\Instance\ALI14531\Device1 1057 PID:83f926ee TID:83f9b4aa Atapi!CDisk::IsDevicePresent> Device 1 is not present; Error register(0x30) 1058 PID:83f926ee TID:83f9b4aa Atapi!IDE_Init> Activating IDE/ATA device Drivers\BuiltIn\PCI\Instance\ALI14531\Device2 1064 PID:83f926ee TID:83f9b4aa Atapi!CDisk::IsDevicePresent> Device 0 is not present; Error register(0x20) 1064 PID:83f926ee TID:83f9b4aa Atapi!IDE_Init> Activating IDE/ATA device Drivers\BuiltIn\PCI\Instance\ALI14531\Device3 1064 PID:83f926ee TID:83f9b4aa Atapi!CDisk::IsDevicePresent> Device 1 is not present; Error register(0x30) 2054 PID:e3e93fca TID:e3f9bf66 Lyg.p: Layout Manager successfully initialized to 1 Here are the debug ones, with the same hardware, same image. The only difference is that it's compiled in Debug. Thank you a lot for the attention! Mello Debug: 4294774702 PID:23f7d402 TID:23f83556 0x83fa88e4: Atapi!IDE_Init> Activating IDE/ATA device Drivers\BuiltIn\PCI\Instance\ALI14531\Device3 4294774702 PID:23f7d402 TID:23f83556 0x83fa88e4: Atapi!IDE_Init> Activating IDE/ATA device Drivers\BuiltIn\PCI\Instance\ALI14531\Device3 4294774703 PID:23f7d402 TID:23f83556 0x83fa88e4: DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\PCI\Instance\ALI14531\Device3\BusPrefix) returned 2 4294774705 PID:23f7d402 TID:23f83556 0x83fa88e4: Atapi!DumpRegKey> Drivers\Active\06 4294774706 PID:23f7d402 TID:23f83556 0x83fa88e4: Hnd = 00057020 4294774706 PID:23f7d402 TID:23f83556 0x83fa88e4: Name = DSK1: 4294774706 PID:23f7d402 TID:23f83556 0x83fa88e4: Key = Drivers\BuiltIn\PCI\Instance\ALI14531\Device3 4294774707 PID:23f7d402 TID:23f83556 0x83fa88e4: Atapi!DumpRegKey> Drivers\BuiltIn\PCI\Instance\ALI14531\Device3 4294774707 PID:23f7d402 TID:23f83556 0x83fa88e4: Port = 00054A30 4294774708 PID:23f7d402 TID:23f83556 0x83fa88e4: DeviceId = 00000001 4294774708 PID:23f7d402 TID:23f83556 0x83fa88e4: TransferMode = 000000FF 4294774708 PID:23f7d402 TID:23f83556 0x83fa88e4: LookAhead = 00000001 4294774708 PID:23f7d402 TID:23f83556 0x83fa88e4: WriteCache = 00000001 4294774709 PID:23f7d402 TID:23f83556 0x83fa88e4: DrqDataBlockSize = 00000200 4294774709 PID:23f7d402 TID:23f83556 0x83fa88e4: DoubleBufferSize = 00010000 4294774709 PID:23f7d402 TID:23f83556 0x83fa88e4: DMA = 00000002 4294774709 PID:23f7d402 TID:23f83556 0x83fa88e4: InterruptDriven = 00000001 4294774710 PID:23f7d402 TID:23f83556 0x83fa88e4: Dll = atapi.dll 4294774710 PID:23f7d402 TID:23f83556 0x83fa88e4: Prefix = DSK 4294774711 PID:23f7d402 TID:23f83556 0x83fa88e4: IClass : 4294774711 PID:23f7d402 TID:23f83556 0x83fa88e4: {A4E7EDDA-E575-4252-9D6B-4195D48BB865} 4294774712 PID:23f7d402 TID:23f83556 0x83fa88e4: Atapi!CPCIDisk::CPCIDisk> device count(1) 4294775356 PID:23f7d402 TID:23f83556 0x83fa88e4: Atapi!CDisk::IsDevicePresent> Device 1 is present 4294775424 PID:23f7d402 TID:23f83556 0x83fa88e4: Atapi!CDisk::IsDevicePresent> Device 1 is present 4294775565 PID:23f7d402 TID:23f83556 0x83fa88e4: Atapi!CDisk::SendExecuteDeviceDiagnostic> Device 1 passed 4294775565 PID:23f7d402 TID:23f83556 0x83fa88e4: Atapi!CDisk::SendExecuteDeviceDiagnostic> ATA device 4294775631 PID:23f7d402 TID:23f83556 0x83fa88e4: Atapi!DumpIdentify> ... 4294775632 PID:23f7d402 TID:23f83556 0x83fa88e4: 5a c f0 22 0 0 f 0 0 0 0 0 3f 0 0 0 Z.."........?... 4294775632 PID:23f7d402 TID:23f83556 0x83fa88e4: 0 0 0 0 42 35 31 46 4d 44 58 51 20 20 20 20 ....B51FMDXQ 4294775632 PID:23f7d402 TID:23f83556 0x83fa88e4: 20 20 20 20 20 20 20 20 0 0 0 2 4 0 2e 38 .......8 4294775633 PID:23f7d402 TID:23f83556 0x83fa88e4: 31 30 20 20 20 20 54 53 34 33 31 33 41 31 20 20 10 TS4313A1 4294775633 PID:23f7d402 TID:23f83556 0x83fa88e4: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 4294775634 PID:23f7d402 TID:23f83556 0x83fa88e4: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80 .. 4294775634 PID:23f7d402 TID:23f83556 0x83fa88e4: 0 0 0 2f 0 0 0 2 0 2 7 0 f0 22 f 0 .../.........".. 4294775634 PID:23f7d402 TID:23f83556 0x83fa88e4: 3f 0 f0 f7 80 0 10 1 f0 f7 80 0 0 0 7 0 ?............... 4294775635 PID:23f7d402 TID:23f83556 0x83fa88e4: 3 0 78 0 78 0 f0 0 78 0 0 0 0 0 0 0 ..x.x...x....... 4294775635 PID:23f7d402 TID:23f83556 0x83fa88e4: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ................ 4294775636 PID:23f7d402 TID:23f83556 0x83fa88e4: 1e 0 0 0 6b 34 1 40 0 40 6a 34 1 0 0 40 ....k4.@.@j4...@ 4294775636 PID:23f7d402 TID:23f83556 0x83fa88e4: 7 4 0 0 0 0 0 0 0 0 0 60 0 0 0 0 ...........`.... 4294775636 PID:23f7d402 TID:23f83556 0x83fa88e4: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ................ 4294775636 PID:23f7d402 TID:23f83556 0x83fa88e4: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ................ 4294775637 PID:23f7d402 TID:23f83556 0x83fa88e4: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ................ 4294775637 PID:23f7d402 TID:23f83556 0x83fa88e4: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ................ 4294775638 PID:23f7d402 TID:23f83556 0x83fa88e4: 1 0 6c c7 81 0 f0 f7 80 0 30 2e 2 0 0 0 ..l.......0..... 4294775638 PID:23f7d402 TID:23f83556 0x83fa88e4: 0 0 0 0 1 0 1 0 1 8 1 1 1 4 1 0 ................ 4294775638 PID:23f7d402 TID:23f83556 0x83fa88e4: 24 3c 1 0 1 0 b4 3c 0 1 0 1 20 1 0 0 $<.....<.... ... 4294775639 PID:23f7d402 TID:23f83556 0x83fa88e4: 1 0 0 13 0 0 e7 9f 14 0 c a e1 0 20 90 .............. . 4294775639 PID:23f7d402 TID:23f83556 0x83fa88e4: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ................ 4294775639 PID:23f7d402 TID:23f83556 0x83fa88e4: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ................ 4294775640 PID:23f7d402 TID:23f83556 0x83fa88e4: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ................ 4294775640 PID:23f7d402 TID:23f83556 0x83fa88e4: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ................ 4294775640 PID:23f7d402 TID:23f83556 0x83fa88e4: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ................ 4294775640 PID:23f7d402 TID:23f83556 0x83fa88e4: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ................ 4294775641 PID:23f7d402 TID:23f83556 0x83fa88e4: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ................ 4294775642 PID:23f7d402 TID:23f83556 0x83fa88e4: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ................ 4294775642 PID:23f7d402 TID:23f83556 0x83fa88e4: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ................ 4294775642 PID:23f7d402 TID:23f83556 0x83fa88e4: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ................ 4294775643 PID:23f7d402 TID:23f83556 0x83fa88e4: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ................ 4294775643 PID:23f7d402 TID:23f83556 0x83fa88e4: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ................ 4294775643 PID:23f7d402 TID:23f83556 0x83fa88e4: rotational speed tolerance is > 0,5 4294775644 PID:23f7d402 TID:23f83556 0x83fa88e4: disk transfer rate > 10Mbs 4294775644 PID:23f7d402 TID:23f83556 0x83fa88e4: fixed drive 4294775644 PID:23f7d402 TID:23f83556 0x83fa88e4: head switch time > 15us 4294775644 PID:23f7d402 TID:23f83556 0x83fa88e4: not MFM encoded 4294775644 PID:23f7d402 TID:23f83556 0x83fa88e4: hard sectored 4294775645 PID:23f7d402 TID:23f83556 0x83fa88e4: number of cylinders : 8944 4294775645 PID:23f7d402 TID:23f83556 0x83fa88e4: number of heads : 15 4294775645 PID:23f7d402 TID:23f83556 0x83fa88e4: unformatted bytes per track : 0 4294775646 PID:23f7d402 TID:23f83556 0x83fa88e4: unformatted bytes per sector : 0 4294775647 PID:23f7d402 TID:23f83556 0x83fa88e4: sectors per track : 63 4294775647 PID:23f7d402 TID:23f83556 0x83fa88e4: buffer type : unspecified 4294775648 PID:23f7d402 TID:23f83556 0x83fa88e4: buffer size : 512 sectors 4294775648 PID:23f7d402 TID:23f83556 0x83fa88e4: read/write multiple : supported, 16 sectors/interrupt 4294775649 PID:23f7d402 TID:23f83556 0x83fa88e4: double word IO : not supported 4294775649 PID:23f7d402 TID:23f83556 0x83fa88e4: LBA mode : supported 4294775650 PID:23f7d402 TID:23f83556 0x83fa88e4: DMA : supported 4294775651 PID:23f7d402 TID:23f83556 0x83fa88e4: PIO cycle timing mode : 2 4294775651 PID:23f7d402 TID:23f83556 0x83fa88e4: DMA cycle timing mode : 2 4294775652 PID:23f7d402 TID:23f83556 0x83fa88e4: current size fields valid : yes 4294775652 PID:23f7d402 TID:23f83556 0x83fa88e4: current number of cylinders : 8944 4294775653 PID:23f7d402 TID:23f83556 0x83fa88e4: current number of heads : 15 4294775653 PID:23f7d402 TID:23f83556 0x83fa88e4: current number of sectors/track : 63 4294775654 PID:23f7d402 TID:23f83556 0x83fa88e4: current sector capacity : 8452080 4294775654 PID:23f7d402 TID:23f83556 0x83fa88e4: sectors/interrupt with read/write multiple : 16 4294775655 PID:23f7d402 TID:23f83556 0x83fa88e4: multi sector setting : valid 4294775655 PID:23f7d402 TID:23f83556 0x83fa88e4: total user addressable sectors : 8452080 4294775656 PID:23f7d402 TID:23f83556 0x83fa88e4: single word DMA modes supported : 0 4294775657 PID:23f7d402 TID:23f83556 0x83fa88e4: single word transfer mode active : 0 4294775657 PID:23f7d402 TID:23f83556 0x83fa88e4: multi word DMA modes supported : 7 4294775658 PID:23f7d402 TID:23f83556 0x83fa88e4: multi word transfer mode active : 0 4294775658 PID:23f7d402 TID:23f83556 0x83fa88e4: Atapi!DumpSupportedTransferModes> Supported transfer mode summary: 4294775659 PID:23f7d402 TID:23f83556 0x83fa88e4: IORDY supported 4294775659 PID:23f7d402 TID:23f83556 0x83fa88e4: minimum multiword DMA transfer cycle time per word (ns) = 120 4294775660 PID:23f7d402 TID:23f83556 0x83fa88e4: manufacturer's recommended multi word DMA transfer cycle time (ns) = 120 4294775661 PID:23f7d402 TID:23f83556 0x83fa88e4: minimum PIO transfer cycle time w/o flow control (ns) = 240 4294775661 PID:23f7d402 TID:23f83556 0x83fa88e4: minimum PIO transfer cycle time w/ IORDY flow control (ns) = 120 4294775662 PID:23f7d402 TID:23f83556 0x83fa88e4: PIO mode 0 supported 4294775662 PID:23f7d402 TID:23f83556 0x83fa88e4: PIO mode 1 supported 4294775663 PID:23f7d402 TID:23f83556 0x83fa88e4: multi word DMA mode 2 and below is supported 4294775663 PID:23f7d402 TID:23f83556 0x83fa88e4: ultra DMA mode 2 and below is supported 4294775664 PID:23f7d402 TID:23f83556 0x83fa88e4: >>> ultra DMA mode 2 selected by default <<< 4294775664 PID:23f7d402 TID:23f83556 0x83fa88e4: look-ahead supported 4294775665 PID:23f7d402 TID:23f83556 0x83fa88e4: write cache supported 4294775666 PID:23f7d402 TID:23f83556 0x83fa88e4: S.M.A.R.T. feature set supported Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62190
  - 14
    - switching from one keyboard driver to another Hi, i have allready posted about this before, but i havent been able to get it to work, so i'm going to reinstall my bsp to have a fresh one to start with. The problem i'm having is the following. In our device (custom hardware) there is allready a keyboard driver that handles the buttons on our device. Now i would like to have the possibility to use the USB keyboard, discarding the buttons on the device itself. So my question is, what do i need to take out to get my old keyboard driver out of the bsp, and what do i need to put in to get my USB keyboard supported? The USB works, as i can use it to read from a memory stick. Later on i want to merge those two, but currently i'm short on time to do it. Thank you in advance, Kristof Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62177
  - 15
    - How to change the com port in EdbgOutputDebugString ? Hi, I trace the eboot codes, and I found it uses "EdbgOutputDebugString" to send messages through com port. In my system, it use com 2. I want to change it to com 1. Where is the code ? Thanks. Yu. Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62174
  - 16
    - using Qemu Are there any things I could do to get images to boot with Qemu? Thanks Uli Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62172
  - 17
    - Usb stick support when plugged in at boot Hello, I have figured out how to support a removable usb memory stick under CE, and it works ok when i plug it in after the OS has booted. But if the stick is allready connected when turning on the power, then the stick is not recognised/seen. My best guess is that is is due to the fact that it is a loadable driver (correct term??) Is there any way i can probe at startup to see if the stick is connected, or is there a way to make it an always loaded driver, but still with the capability to start it when i load/change sticks at runtime? Thank you, Kristof Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62171
  - 18
    - Retail vs Evaluation Dear CE gurus, does anybody know what are the differences between Windows CE 5.0 retail and Windows CE evaluation edition? Will the BSP developed and tested with retail PB 5.0 work for BP 5.0 evaluation edition? Thanks Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62170
  - 19
    - Checksum failure if problem image to the flash Hi, All I modified config.bib to problem nk.bin to the flash. But I got checksum failure when eboot starts downloading the image. The error msg is: ****** OEMVerfyMemory checking physical range [0x80000==>0xE16627]... ****** FLASH Address ****** ERROR: Checksum failure (expected=0x2EB computed = 0x2C6) *******Checksum failure on record 1, ABORT!!! ****** The config.bib is as follows, the platform is PXA27x WinCE5.0. Did I miss out anything? MEMORY ; Name Start Size Type ; ------- -------- -------- ---- RSVD 80000000 000FF000 RESERVED ARGS 800FF000 00001000 RESERVED NK 9CA80000 01000000 RAMIMAGE RAM 80100000 03F00000 RAM ; Reserve ZBANK virtual block (No physical memory ; is required to back this virtual range). ; ZBANK 96500000 00100000 RESERVED CONFIG ROMSTART=9CA80000 ROMSIZE=01000000 ROMWIDTH=32 AUTOSIZE=OFF KERNELFIXUPS=ON Thanks in advance Tang Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62161
  - 20
    - Warm boot clear "working RAM"? I'm a bit confused when I read WinCE 5.0 documentation : Kernel Power Management. The state diagram shows that Warm Boot clear working RAM. My impression is that warm boot will not clear the content of the RAM. Could anyone clarify what exactly is preseved/cleared during warm boot? Device drivers? Application? What exactly is "working RAM"? Thanks! Zhijie Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62160
  - 21
    - How to develop CAN bus driver in CE? Hi all, now I want to develop CAN bus driver, but dont know how to start. where may I find can bus driver source codes or who may give some glues or source codes? thanks! Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62159
  - 22
    - Is this a bug in Bul_usbfn.cpp ? SGksYWxsDQogICAgSSBkb3VidCB0aGlzIGlzIGEgYnVnIGhlcmU6DQogICAgd2luY2U1MDBccHVi bGljXGNvbW1vblxvYWtcY3NwXGFybVxpbnRlbFxweGEyN3hcdXNiZm5cYnVsX3VzYmZuLmNwcA0K ICAgIEJ1bFVzYkRldmljZTo6U3RhcnQoKQ0KICAgIFdyaXRlSW50ckN0cjFSZWdpc3RlciggUmVh ZEludHJDdHIxUmVnaXN0ZXIoKSB8IA0KICAgICAgICAoVURDSVNSMV9JUkNDIHwgVURDSVNSMV9J UlJVIHwgVURDSVNSMV9JUlNVIHxVRENJU1IxX0lSUlMgKSk7DQogICAgSXQgcmVhZCBhbmQgd3Jp dGUgaW50ZXJydXB0IGNvbnRyb2xsZXIgcmVnaXN0ZXIgdG8gZW5hbGJlIGludGVycnVwdHMsIGJ1 dCB0aGUgYml0cyBhcmUgaW4gaW50ZXJydXB0IHN0YXR1cyByZWdpc3Rlcj8gIENhbiBhbnlvbmUg dGVsbCBtZSB3aGF0IGl0IHdhbm5hIGRvIGluZGVlZD8NCg0KDQotLS0tLS0tLS0tLS0tLS0tLS0t LS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLSAgICAgDQpKLldhbHplcg0KSW50 ZWxsaWdlbnQgR3JvdXBpbmcgUmVzZWFyY2ggYW5kIERldmVsb3BtZW50IEluc3RpdHV0ZSAgICAg ICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgICANCkFtb2kgRWxlY3Ryb25pY3MgQ28u LEx0ZC4NCndhbmd6QGFtb2kuY29tLmNuDQpURUw6Kzg2LjU5Mi42NTEuNjc3NyBleHQuNjUwOA== Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62158
  - 23
    - eboot usb transfer, want to implement usb image transfer in eboot. EZUSB, or usb to serial adaptor protocol come to mind. is there any documentation or even simple software that show how does it work? and where can i find those "standard usb device" protocols? e.g. standard HID, standard mass storage device, standard printer device etc. thanks Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62154
  - 24
    - I/O card locks up new Dell X50 I wrote a driver for a I/O mode flash device my company is developing and it runs fine on a PXA255 based Dell Axim running PPC 4.2 and an HP IPAQ that is based on a PXA250 running PPC 4.2. However, when I plug the device into a Dell that is based on a PXA270 and PPC (now Windows Mobile??) 4.2 2nd Edition, my driver loads OK and receives data from the I/O card (I know this because the driver can write the incoming buffers to files), but the Windows UI stops functioning and takes no user input and never refreshes the screen. Does anyone know if 4.2 2nd edition requires driver mods? Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62144
  - 25
    - adding a new emulator to Visual Studio 2003 environment Hi guys, I just wanted to know how to add an emulator to the VS 2003 environment. Especifically, I donwload an SDK for a 3rd vendor (but it was built by Conectix). It requires embedded C++ 4.0 to be installed. I can deploy from the embedded tool, but it says it's emulating windos CE.NE. Anyway, how to add that (or any other) emulator to the VS 2003 environment TIA -- Leo Tag: How to transfer the debug messages to EVC through activesync,not K Tag: 62142

Hi,
Now I want to develop programs without PB supporting, but use microsoft
activesync. I find I can use activesync to do one-step debugging, but I can't
get debug messgae from EVC. The debug message is produced by RETAILMSG.

Fred

Top

Re: How to transfer the debug messages to EVC through activesync,not K by Bruce

Bruce
Tue Jan 11 07:20:59 CST 2005

Have you tried disabling KITL?

--
Bruce Eitman (eMVP)
Senior Engineer
beitman AT applieddata DOT net

Applied Data Systems
www.applieddata.net
An ISO 9001:2000 Registered Company
Microsoft WEP Gold-level Member

Top