security policies - unsigned dll

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Plaform Manager API question Dear all, I am developing a remote tool using WINCE Platform Manager API and face the following problem. Scenario: -VB code from samplesreg.vbs Set platman = CreateObject("PlatformManager.PlatformManager.1") Set package = platman.AddPackage (pkgName, pkgId) -My equivalent VC++ code CoInitializeEx(NULL, COINIT_MULTITHREADED); IPMPlatformManager *PlatMan = NULL; HRESULT hRes = CoCreateInstance(CLSID_PlatformManager, NULL, CLSCTX_LOCAL_SERVER, IID_IPMPlatformManager, (void**)&PlatMan); IPMPackage* ppiPackage; hRes = PlatMan->AddPackage( pPackageName, NULL, &ppiPackage); -The above call to AddPackage() returns error -Error code is 0xc0000005 which is not documented in winerror.h -However, i can successfully call other fuctions of IPMPlatformManager like CreateGUID() and EnumPackages() Questions: 1. Can anybody tell what is wrong with my implementation? Or, anything more to be done? 2. I find two interfaces, IPlatformManager and IPMPlatformManager in cemgr.h and all samples seem to be using IPlatformManager and not IPMPlatformManager. What is the difference between the two interfaces? 3. Is it possible to add packages to Platform manager using IPlatformManager interface? Any help would be welcome. Thanks in advance, Aiswarya Tag: security policies - unsigned dll Tag: 74932
  - 2
    - How to control a NDIS device via NDISUIO driver Dear all, I want to control a NDIS device via NDISUIO drvier. Also, I want to use NDISUIO driver to write and read data. Now, I can create the handle for the device. When I want to bind the handler to the adapter, it occur error. PS1: My WLAN card is CISCO Aironet 350, My OS is WinCE.NET 4.2 PS2: My code is as following. -Kemin ---------------------------------------------------------------------- BOOL UnReBindAdapter( int nBindType, PVOID pAdapter, DWORD dwAdapterLen, PVOID pProtocol, DWORD dwProtocolLen ) { CHAR Buf[512]; HANDLE hPhysicalDevice; DWORD bResult,dwReturnedBytes; memset( Buf, 0, 512 ); memcpy( Buf, pAdapter, dwAdapterLen ); memcpy( Buf+dwAdapterLen, pProtocol, dwProtocolLen ); hPhysicalDevice = CreateFile( _T("NDS1:"), GENERIC_READ|GENERIC_WRITE, FILE_SHARE_READ | FILE_SHARE_WRITE, NULL, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL | FILE_FLAG_OVERLAPPED, INVALID_HANDLE_VALUE); if( INVALID_HANDLE_VALUE == hPhysicalDevice ) { CommEvent::PrintEvent( "INVALID_HANDLE_VALUE\n" ); return bResult; } bResult = DeviceIoControl( hPhysicalDevice, (nBindType==BIND ? (IOCTL_NDIS_BIND_ADAPTER) : (nBindType==UNBIND ? (IOCTL_NDIS_UNBIND_ADAPTER) : (IOCTL_NDIS_REBIND_ADAPTER) ) ), Buf, 512, NULL, 0, &dwReturnedBytes, NULL); CloseHandle(hPhysicalDevice); return bResult; } Tag: security policies - unsigned dll Tag: 74931
  - 3
    - PowerPolicyNotify and PPN_UNATTENDEDMODE I am attempting to customize the behavior of our device. Based on the state of an Event we want to have two different behaviors for the power button. 1) Function as normal (On-Suspend) 2) Go to a fake suspend state. My understanding is that unattended mode has this characteristic. Right now my keypad driver issues the following commands - SetSystemPowerState(NULL, POWER_STATE_SUSPEND, POWER_FORCE); SetSystemPowerState(NULL, POWER_STATE_ON, POWER_FORCE); The problem is that when I issue the call PowerPolicyNotify(PPN_UNATTENDEDMODE, TRUE); the screen does not blank and all the buttons quit responding even the power button! There is a post from David Liao (MS) that says to use the PPN_POWERBUTTONPRESSED but there is no documentation of this and I did not understand his post? I have two paths I need to take: 1- Pwr Button -> unattended mode Device Driver -> Suspend Device Driver -> On 2- Pwr Button -> unattended mode Pwr Button -> On Any help would be appreciated as the documentation is extremely brief. Gerrit Tag: security policies - unsigned dll Tag: 74910
  - 4
    - Critical section in Com_init in mdd.c Hi, In Com_init a critical section 'OpenCS' is initialised early on, if one of the CreateEvents that follow fail then the control structure, pserialhead points to is freed with LocalFree(pserialhead). However the criticalsection is not deleted. This is only done when Com_deinit is called which happens later on in Com_init when certain things fail. What am i missing? Tag: security policies - unsigned dll Tag: 74909
  - 5
    - CeCompressROM Hi, I build some modules with PB compress.dll "CECompress" functions. Then I use inside WinCE the Kernel's CeDeCompressROM to get the data out. The PB compress.dll "CECompress" function is very efficient. Now I would like to compress some data inside WinCE. After some research I found that the equivalent compress function in WinCE is CeCompressROM but this function is no more available in WinCE 4.x and later. I would like to know if someone knows wehre I can get CeCompressROM or source code to rebuild this functionality. I know that I can rebuild every compress and decompress functions for my purpose but since CE and PB already support mostly what I need, I think that maybe this function exist somewhere but with a different name. Regards Tag: security policies - unsigned dll Tag: 74905
  - 6
    - Modify control panel ( CPLMAIN_COMPONENTS cesysgen wceshellfe ) Under CE 4.2, we copied %_publicroot%\IABASE\OAK\MISC\cesysgen.bat to %_projectroot%\OAK\MISC and modified this one rule: if "%SYSGEN_BATTERY%"=="1" set CPLMAIN_COMPONENTS=%CPLMAIN_COMPONENTS% power to REM if "%SYSGEN_BATTERY%"=="1" set CPLMAIN_COMPONENTS=%CPLMAIN_COMPONENTS% power This removed the standard power applet from the cplmain.cpl. Under CE 5.0, this code is no more found in cesysgen.bat, but in wceshellfe.bat. Copying this file to my project directory and modifying the same line did not work. Does PB 'know' it has to read this batch file in my project directory? Tag: security policies - unsigned dll Tag: 74904
  - 7
    - How to play Media file like WMV? How to play Media file like WMV? Now I dont have reference board. I installed Platform Builder 4.2 Is it possible to play WMV file in emulator without board? Please let me know about that. I wanna take a rest on a weekend. Tag: security policies - unsigned dll Tag: 74900
  - 8
    - downloading to flash... can anyone please tell me how to transfer the NK.bin to the flash so that i can boot the OS directly from the flash itself............ Please give me tips on this....... Tag: security policies - unsigned dll Tag: 74888
  - 9
    - including exe to image(help) i want to include the exe of the appplication developed in evc to the OS image. Can anyone please tell me how to do it????? Tag: security policies - unsigned dll Tag: 74887
  - 10
    - voip am using Windowsce.net4.2 evaluation edition Platform Builder and i am using the IP Phone Advanced platform. I am using a third party BSP - s3c2410 development platform which has a ARMV4 processor. I want to download the IP Phone image to this target and work. and i use ondo sip server of brekeke. according to the help of' How to Create an IP Phone on an Emulator',i modified some place.but it shows that can not find the server.i don't know if this change below is right or not,who can help me? in the second stage'Creating an IP Phone Provisioning File' <sip_uri>someone@example.com</sip_uri> <sip_server>SIP Server Address</sip_server> <sip_username>Username</sip_username> i changed them into <sip_uri>aaa@192.168.0.207</sip_uri> <sip_server>192.168.0.1</sip_server> <sip_username>aaa</sip_username> are there anything wrong with the changes? please help me~ Tag: security policies - unsigned dll Tag: 74884
  - 11
    - Problem inside KernelInit Hi, Something for the specialists... I am having a problem very early in CE 5.0 boot on PXA255 - new hardware and I am using an in-circuit debuggger to start. KernelInit > SchedInit > MDCreateThread and inside MDCreateThread the call "KSTKBASE(pTh) = (DWORD)lpStack" causes havoc. Program Counter ends up in the 0xFFFF0000 region. Until this point I can send debug messages but the kernel debugger is not yet connected. For a while I have gotten past this and then CE booted all the way and seemed to have no problem at all, and now the problem is back and I have no idea what has changed. I have been working on the same hardware all the time so I don't think there is a hardware problem. Could anyone point me somewhere, because at the moment I am nowhere. Regards, Piet Tag: security policies - unsigned dll Tag: 74883
  - 12
    - Created Users is cleaned each reboot!!! I use Hive-Base Registry. for example, I create a user "user1". BUT this user is gone when I reboot the CE OS. Am I missing some settings? below is my reg settings. [HKEY_LOCAL_MACHINE\init\BootVars] "SystemHive"="\\Documents and Settings\\system.hv" "ProfileDir"="\\Documents and Settings" "Start DevMgr"=dword:1 [HKEY_LOCAL_MACHINE] "RegPersisted"=dword:1 [HKEY_CURRENT_USER] "RegPersisted"=dword:1 Tag: security policies - unsigned dll Tag: 74876
  - 13
    - Created Users is cleaned up each reboot? I use Hive-Base Registry. for example, I create a user "user1". BUT this user is gone when I reboot the CE OS. Am I missing some settings? below is my reg settings. [HKEY_LOCAL_MACHINE\init\BootVars] "SystemHive"="\\Documents and Settings\\system.hv" "ProfileDir"="\\Documents and Settings" "Start DevMgr"=dword:1 [HKEY_LOCAL_MACHINE] "RegPersisted"=dword:1 [HKEY_CURRENT_USER] "RegPersisted"=dword:1 Tag: security policies - unsigned dll Tag: 74875
  - 14
    - Power management options ? Hi, I am working on an application which must run all the time after it has started. Essentially this would mean that device should never suspend/power off when on battery. This is very critical to the functionality of the application. The targetted device is Motorola HDT600 based on WinCE 4.2. I have identified a few options that could prevent the device from sleeping: Option-1 ---------- Under "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power\" key set "DisableGwesPowerOff" to non-zero. As per the documentation, if DisableGwesPowerOff is set to non-zero, Power Manager will ignore the settings described in Option-2. Option-2 ------------ Under "HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power" key, set "BattPowerOff" to zero. This is similar to changing the Control Panel Power applet setting to "Never". Option-3 ------------ Under "HKEY_LOCAL_MACHINE \System\CurrentControlSet\Control\Power\Timeouts" key, set "BattSuspend" to zero. Now my doubts are: 1) Why do we have so many different options for this? 2) What would be the tradeoff between option 2 and option 3? i.e. if we programatically go for option 3 but user goes to control panel power applet and makes changes there? 3) What would be the better way of doing it? We have already decided NOT to use other methods like periodically calling SystemIdlePowerReset() and sending fake keyboard events from a different thread. Thanks in advance. regards, Dapi Tag: security policies - unsigned dll Tag: 74873
  - 15
    - Passed items - where are they? I notice that currently the history stops at June 2005. Where can I find earlier postings to this group? -- Stewart Clark Tag: security policies - unsigned dll Tag: 74872
  - 16
    - ip phone i am using Windowsce.net4.2 evaluation edition Platform Builder and i am using the IP Phone Advanced platform. I am using a third party BSP - s3c2410 development platform which has a ARMV4 processor. I want to download the IP Phone image to this target and work. and i use ondo sip server of brekeke. according to the help of' How to Create an IP Phone on an Emulator',i modified some place.but it shows that can not find the server.i don't know if this change below is right or not,who can help me? in the second stage'Creating an IP Phone Provisioning File' <sip_uri>someone@example.com</sip_uri> <sip_server>SIP Server Address</sip_server> <sip_username>Username</sip_username> i changed them into <sip_uri>aaa@192.168.0.207</sip_uri> <sip_server>192.168.0.0.7</sip_server> <sip_username>aaa</sip_username> are there anything wrong with the changes? please help me~ Tag: security policies - unsigned dll Tag: 74871
  - 17
    - Platform Builder USB Download Image File Hello ALL: I will use USB & Serial to Download nk.bin,What i do???? Thank you! Tag: security policies - unsigned dll Tag: 74870
  - 18
    - booting from mainstoneII's flash Hi The mainstoneII bsp in platform builder does not support booting from flash. I want add that capability myself,How to do that? Please give me some advises. Tag: security policies - unsigned dll Tag: 74867
  - 19
    - Platform Builder 4.0 Remote Process Monitoring Issue Hi I have got a Geode based hardware running WINCE 4.2 in it. I am trying to look at the System Performance using the Remote Process Monitor tool (PB 4.0) but whenever I am trying to connect to the "Target", it hangs my development PC where I am running a "TCP IP based connection with Manual Server". I tried snooping at the Ethernet traffic and have seen the Development Station closing the TCP session. I am able to use the other PB tools like File Viewer, Process Viewer etc. Also I have got a WINCE 5.0 image running in the same hardware and with the WINCE 5.0 image and PB 5, I am able to monitor the System performance. The PB 4.0 is updated to the latest "Update Release". I would like to know is there any specific update on this topic. -- Thanks Newbie Tag: security policies - unsigned dll Tag: 74866
  - 20
    - hive-based registry problems Hello, Here is the platform I'm working with. They have 2 ide devices. One is a DOM or flash based storage with an ide interface. I'm using that to boot the nk.bin from. I'm using the x86 bios boot loader. The second ide device is a hard drive. The DOM shows up as "hard disk" in windows ce 5.0 when it's booted and the hard drive shows up in windows ce 5.0 as "hard disk2". They are both sharing the common storage manager profile HDProfile to mount the partition on each one of them in windows ce 5.0. Now I want to use the hive-based registry and store the changes to the system hive registry on the DOM as system.hv. I put this into platform.reg: [HKEY_LOCAL_MACHINE\init\BootVars] "SystemHive"="Hard Disk\\SYSTEM.HV" I also put this into my platform's main .bat file as told in the windows ce 5.0 live chat today by one of the developers: set PRJ_ENABLE_REGFLUSH_THREAD=1 set PRJ_ENABLE_FSREGHIVE=1 set PRJ_BOOTDEVICE_ATAPI=1 Yet it isn't booting at all for me now into windows ce 5.0. What can I do to enable this? Tag: security policies - unsigned dll Tag: 74865
  - 21
    - Windows CE emulator Where could I download a windows ce emulator to work with cembedded and plaform builder? Tag: security policies - unsigned dll Tag: 74857
  - 22
    - removed SYSGEN_CONNMS, can't build In trying to minimize my NK.BIN, I removed Network User Interface SYSGEN_CONNMS component from a PB workspace that built previously. Now it fails to build commctrl.lib with the following type of link errors: ... C:\WINCE500\public\common\oak\lib\ARMV4I\retail\commctrl.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\commctrl_hpc.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\commctrlview.lib C:\WINCE500\PBWorkspaces\lpd_vista\lpd404\WINCE500\LoCE_ARMV4I\cesysgen\sdk\lib\ARMV4I\retail\coredll.lib C:\WINCE500\PBWorkspaces\lpd_vista\lpd404\WINCE500\LoCE_ARMV4I\cesysgen\oak\target\ARMV4I\retail\0409\commctrl.res C:\WINCE500\public\common\sdk\lib\ARMV4I\retail\corelibc.lib C:\WINCE500\PBWorkspaces\lpd_vista\lpd404\WINCE500\LoCE_ARMV4I\cesysgen\sdk\lib\ARMV4I\retail\commctrl.exp commctrl.lib(da.obj) : error LNK2019: unresolved external symbol DSA_Create referenced in function "struct _DSA * __cdecl xxx_DSA_Create(int,int)" (?xxx_DSA_Create@@YAPAU_DSA@@HH@Z) commctrl.lib(da.obj) : error LNK2019: unresolved external symbol DSA_Destroy referenced in function "int __cdecl xxx_DSA_Destroy(struct _DSA *)" (?xxx_DSA_Destroy@@YAHPAU_DSA@@@Z) ... Can anyone point me to what's missing here? PB does not report any dependencies for the removed item so I am stumped. Thanks! Tag: security policies - unsigned dll Tag: 74856
  - 23
    - PowerPolicyNotify The documentation on this seems pretty brief. Does anyone have any resources that explain this in more detail? Gerrit Tag: security policies - unsigned dll Tag: 74844
  - 24
    - please help!! pxa27x usb client controller, system resume hello i am still tracing the problem i am facing. after a system sleep-resume, the usb client controller is not working. during the trace i found two bugs in the code 1: in bul_usbfn.cpp(orginally living in public/oak/csp/arm/intel/pxa27x/usbfn) the function BOOL BulUsbDevice::ReInit() this for loop for (DWORD dwIndex=0; dwIndex<MAX_ENDPOINT_NUMBER; dwIndex++) was missing the {} so that it is doing a single line instead of the desired block in function void BulUsbDevice::PowerUp() and void BulUsbDevice::PowerDown() this if statement is never valid so it is not doing power on/off code at all. if (m_CurPowerState == PwrDeviceUnspecified) { ok and this is my current debug trace right after system boot. ------------------------------------- cken:0x 800 means the internal clock for usb client controller is enabled udccr:0 mean usb is not active. ep0:95 , 0: 95 is the set up code to clear status, 0 is the value of udccsr0. i.e. nothing is happening. epx:<value>, <value>: first value is the code to clear status, the second value is the current status of the end point. looking good. uddcr is 0 in the beginning of start() function, and then it is 1 when it is leaving start(). 1 means the udc is active. by the first waitforsingleobject timeout, udccr turns to 3. i.e. enabled, and active. looking good. of course usb is working at this stage ------------------------------------- hardinit! cken:0x 800, udccr:0x 0 hardinit+ cken:0x 800, udccr:0x 0 hardinit- cken:0x 800, udccr:0x 0 ep0:0x 95, 0x 0 epx:0x 200D103, 0x 200D103 epx:0x 2014101, 0x 2014101 BulUsbDevice start +cken:0x 800, udccr:0x 0 BulUsbDevice start -cken:0x 800, udccr:0x 1 thread ints0 0x0, ints1 0x0,intc0=0x3, intc1=0xb8000000 thread cken:0x 800, udccr:0x 3 ------------------------------------------- this is the trace when the system is resumed from sleep(i do remove cable before doing system sleep) in this log, nothing is changed, except the udccr do not turn to 3, that is enabled, but never go active. actually udccr0 was reporting EMCE, end point memory config error right after system power up. i notice something very strange here... the EMCE flag will pop up again even if i wrote UDE:0(usb device enable:off) and EMCE:1(it is a write 1 clear bit) i tried to set every register of the udc to the reset value, by writing the default value and writing 1 for "write 1 to clear" bits. now it do not complain about EMCE now. but it don't help too much. UDC just don't go active. looks like the udc is not being reset correctly. the register setting response is strange enough ------------------------------------- usb powerup BulUsbDevice PowerMgr on hardinit! cken:0x 800, udccr:0x 0 hardinit+ cken:0x 800, udccr:0x 0, ints0:0x 0, ints1:0x 0, intc0:0x 0, intc1:0x 0 hardinit- cken:0x 800, udccr:0x 0 ep0:0x 95, 0x 0 epx:0x 200D103, 0x 200D103 epx:0x 2014101, 0x 2014101 BulUsbDevice start +cken:0x 800, udccr:0x 0 BulUsbDevice start -cken:0x 800, udccr:0x 1 thread ints0 0x0, ints1 0x8000000,intc0=0x3f, intc1=0xb8000000 thread cken:0x 800, udccr:0x 1 usbthread:usb cable detached start processing interrupt a b c d e f g thread ints0 0x0, ints1 0x0,intc0=0x3f, intc1=0xb8000000 thread cken:0x 800, udccr:0x 1 ------------------------------------- Tag: security policies - unsigned dll Tag: 74839
  - 25
    - Samsung 2410 display question I am finally able to download an nk.bin created by PlatformBuilder 5.0 to my target board. My next problem is the lcd does not display the WinCE desktop. The BSP provided by Microsoft assumes a 320x240 display and my development board uses a 640x480. I modified the .cpp and .h files in the WinCE500\Public\Common\Oak\CSP\ARM\Samsung\s3c2410x\Display\s3c2410x_lcd folder, but no luck. Even before the mods using the default 320x240 settings didn't work. Is there any other places where I need to specify the display type? Thanks in advance. Tag: security policies - unsigned dll Tag: 74838
- Next
  - 1
    - ActiveSync Issue over serial Hi, We have developed a serial driver for Windows CE 5.0 based device and it is working fine with the hyper terminal also passing the CETK test cases. We are able to send and receive to the port if we connect and communicate using hyper terminal but unfortunately when we tried to connect the ActiveSync it is not detecting the device in any of the COM ports. From the device side we did the following. In the Network And Dial-Up Connections application, we have created a New Connection with Direct Connection and have selected the device corresponding to the board serial port with Flow Control to None and Baud Rate at 19200 Configured the board to use the new connection as its means to connect to other computers: In the PC Connection application in the Control Panel directory Enabled Direct Connections, and set the connection to new connection We have implemented the driver over UART1. Any help is appreciated, Thanks in advance, San Tag: security policies - unsigned dll Tag: 74836
  - 2
    - Pocket CMD 5.0 extremely slow Dear Group I'm convinced that there is something wrong in my build (CE5.0) as the console window is extremely slow (could be compared to an old telex). I have tried with two hardware platforms 1.. Geode based industrial PC: Works fine with CE 4.1 2.. Xscale PXA27x: works fine with vendor supplied platform. The rest of the platform seems to run at normal speed. Am I missing a SYSGEN or is there a hidden CONSOLE_GO_SLOW define somewhere? Best regards Denis Tag: security policies - unsigned dll Tag: 74835
  - 3
    - LoadCEPC takes long time to boot Dear group. I have created a platform for the Geode CPU using Platform builder 5.0. Using platform manager I can download and I can debug my application using eVC. If I copy the NK.bin to the target and try to boot it with LoadCEPC I run into problems. Loading the binary into ram takes the expected time for a 29MB image. Booting however takes more than 100 seconds. If the LAN cable is inserted it will never start. If the platform manages to start I can see that it contains the VMINI1 driver. As I understand it this should only be available when using the Platform manager to boot the image. I have also read that ENABLING SHIP BUILD would fix the problem but that does not seem to change much. My solution so far is to have one build with KITL and CE target control for debugging, and one build without these for actual release. I have previously used CE 4.1 and it was not necessary to make these twist and turns to get it working. I hope that I'm simply missing the obvious, but I have searched the net for weeks now, and can't seem to find an answer. Best regards Denis Tag: security policies - unsigned dll Tag: 74834
  - 4
    - Where can I download "Brain Dead File System"? Hi all. I heard that there is a sample IFS driver written by Steve Maillet. I found a link to it on this group, but it's broken. Where can I download it? Thanks in advance. GAMJA Tag: security policies - unsigned dll Tag: 74833
  - 5
    - Problem in WindowsCE handsfree device Hi, Iam trying to test the handsfree profile on windows CE. After pairing with the handsfree device,iam trying to open the control connection. After that RFCOMM connection has been established and the handsfree device is sending the AT commands,but AG is failing to read those commands. Before that it is showing debug message in RFCOMM that " Session to 000b0d043042 closed because of hardware errors (1 total)"..,so its calling rfcomm_Disconnect_Ind and closing the connection... These are the debug messages Iam getting: 86354 PID:6f76e002 TID:ef467f92 [RFCOMM] Session to 000b0d043042 closed because of hardware errors (1 total) 86354 PID:6f76e002 TID:ef467f92 [RFCOMM] 86354 PID:6f76e002 TID:ef467f92 CloseSession : 0x00269330 86355 PID:6f76e002 TID:ef467f92 [RFCOMM] 86355 PID:6f76e002 TID:ef467f92 CloseSession:: closing 000b0d043042 86355 PID:6f76e002 TID:ef467f92 [RFCOMM] 86355 PID:6f76e002 TID:ef467f92 DeleteChannel : 000b0d043042 h = 0x002694d0 close 1 err 13 86356 PID:6f76e002 TID:ef467f92 [RFCOMM] 86356 PID:6f76e002 TID:ef467f92 CloseSession : 0x00269330 86356 PID:6f76e002 TID:ef467f92 [WARN] 86356 PID:6f76e002 TID:ef467f92 CloseSession:: Session 0x00000000 not found! 86357 PID:6f76e002 TID:ef467f92 [RFCOMM] 86357 PID:6f76e002 TID:ef467f92 DeleteChannel : going into rfcomm_Disconnect_Ind 86357 PID:6f76e002 TID:ef467f92 [TDI] 86357 PID:6f76e002 TID:ef467f92 +tdir_disconnect_ind 86357 PID:6f76e002 TID:ef467f92 [TDI] 86358 PID:6f76e002 TID:ef467f92 SignalConnectionLoss : closing connection 0x00262270 to 000b0d043042 0x16 86358 PID:6f76e002 TID:ef467f92 [TDI] 86358 PID:6f76e002 TID:ef467f92 SignalConnectionLoss : forwarding up disconnection event conn 0x00262270 86359 PID:6f76e002 TID:ef467f92 [TDI] 86359 PID:6f76e002 TID:ef467f92 -tdir_disconnect_ind 0x00262270 ERROR_SUCCESS 86359 PID:6f76e002 TID:ef467f92 [RFCOMM] 86359 PID:6f76e002 TID:ef467f92 DeleteChannel : out of rfcomm_Disconnect_Ind 86359 PID:6f76e002 TID:ef467f92 [RFCOMM] 86360 PID:6f76e002 TID:ef467f92 ClearTimeout : 000b0d043042 86360 PID:6f76e002 TID:ef467f92 [RFCOMM] 86360 PID:6f76e002 TID:ef467f92 CloseSession : going into l2ca_Disconnect_In 86360 PID:6f76e002 TID:ef467f92 [L2CAP] 86361 PID:6f76e002 TID:ef467f92 l2ca_disconnect_in (0x004d) If you have any idea regarding this problem,please help. Thank You, Tag: security policies - unsigned dll Tag: 74832
  - 6
    - Please help me. Installable File System - Unresolved external symbol _FSDMGR_XXXXX Hi. I'm trying to build my own IFS DLL. To do this, I started a new project in PB and added it to my platform. (Main menu -> File -> New Project or File -> WCE Dynamic Link Library -> ...) Everything looks fine, but PB complains as following. BUILD: [01:0000000059:ERRORE] MyFSD.obj : error LNK2019: unresolved external symbol _FSDMGR_GetVolumeName referenced in function _MyFSD_MountDisk BUILD: [01:0000000060:ERRORE] MyFSD.obj : error LNK2019: unresolved external symbol _FSDMGR_RegisterVolume referenced in function _MyFSD_MountDisk ........ BUILD: [01:0000000066:ERRORE] obj\x86\debug\MyFSD.dll : fatal error LNK1120: 7 unresolved externals What's wrong? Please help me, even a simple note. Thanks in advance GAMJA Tag: security policies - unsigned dll Tag: 74829
  - 7
    - KernelIOControl from an application hello, first of all, I'm not a programmer, but I have built a Windows CE.NET 4.2 image for our application. Two other guys are writing our application in CE.NET environment. We need to cold reset the device programmatically from our application. This could be done by calling the KernelIoControl(IOCTL_HAL_REBOOT).... and something, we found an advice for that. But what is needed in Platform builder (modules etc.) to enable this call from our application? The guys tried that code, but reboot of the machine is not working? I need the basic information of how to implement the KernelIoControl function from our own application. Thanks in advance, Mike Tag: security policies - unsigned dll Tag: 74828
  - 8
    - device driver compilation problem I developed a battery driver for a PX255 based WinCE 5.0 board (IDP). When I compile it, I got following compilation error: ============================================================================ ======================== BUILD: [01:0000000034:ERRORE] NMAKE : U1073: don't know how to make 'C:\WINCE500\PBWorkspaces\IDP_PXA250_IA\WINCE500\IDP_PXA250_CE50_05.00.07_AR MV4I\cesysgen\oak\lib\ARMV4I\debug\islbattdrvr.def' BUILD: [01:0000000036:ERRORE] NMAKE.EXE -i -c BUILDMSG=Stop. NOLINK=1 PASS0ONLY=1 failed - rc = 2 ============================================================================ ======================== File "islbattdrvr.def" is not in the debug directory,, but is in the same directory as my driver source code: C:\WINCE500\PLATFORM\IDP_PXA250_CE50_05.00.07\drivers\ISLBATTDRVR. I believe this file should be automatically copied. What did I do wrong? Any settings I should pick? Thanks, Fan Tag: security policies - unsigned dll Tag: 74825
  - 9
    - USB Host for Intel PXA27x Hi all, I am a newbie to WinCE and developing a device using Intel PXA27x and Platform builder 5.0. I would like to add USB Host (HID and Mass Storage) feature to my device. I have added the following component from catalog: - PXA27x USB Host (OHCI) - USB Human Input Device(HID) Class Driver - USB Storage Class Driver - FAT File System - Partition Driver I can use USB mouse successfully. But when I plug-in a USB card reader. It fails to show the disk under "My Device". The PB showed the OS loaded USBMSC.DLL and USBDISK6.DLL. The MSPART.DLL has loaded and unloaded repeatly. Do I miss any component? Do you guys show me a complete list of component needed for Mass Storage? Thanks ! Bryan Tag: security policies - unsigned dll Tag: 74824
  - 10
    - Need Usb Host Controller CETK Testing Document Hi, we are in the stage of testing the USB Host Controller.Whenever we connect a usb device and run the test ,it is skipping all the tests. From the previous posts,i came to a conclusion that a testing document Draft is there for USB Host Controller CETK testing. Can you pls send it to me in the following id mail2me777@gmail.com or mail_2_me777@hotmail.com If any one who has tried the same procedure,pls tell me the steps.It will save a lot of time. Expecting your reply and the document.. Thanking you Tag: security policies - unsigned dll Tag: 74822
  - 11
    - Splash Screen Lgog Thanks Nicolas and Chris for your reply I am working on x86 based system it has standard VGA display Monitor. My BSP works fine only otherwise. The problem is with the Splash screen. I have not modified any sorce code. The changes I have done in the Project settings of ..\ BIOSLOADER\Loader Project. I have declared new Variable NO_COMPRESSION and removed CECOMPRESSION variable from the sources file. I have Put my Companey name "SoftDEL Systems Ltd." in the Splash.bmp file When my bootloader starts I see the letters "s ltd. ftDEL Systems Ltd. Soft" fully distorted image. The size of the BITMAP file is 7KB. I dont know how to fix the\is problem. The other observation is. The same bootloader is wroking fine with Microsoft Providded Splash.bmx file. Only thing is I need to enable the CECOMPRESSION variable form the source files of Bootloader project. That's why I thought If I create .BMX file from my own .BMP files it will display the Spalsh screen Properly. I tried searching information related .BMX file but could not get any information about it neither on microsoft site nor on the internet. The antoher problem is that in the .BMP file used has Black & White Image. If I use colours in the Bitmap Image its size exceeds 10KB limit. Whcih creates problem in booting. My compeanye needs put colour logo like the one Microsoft has displayed. It can be achieved only by compressing the coloured bitmap file. Can you please tell me how can convert .BMP to .BMX. Thanks again for your help. -- Swapnil Malavde Swapnilmalavde@yahoo.com Tag: security policies - unsigned dll Tag: 74820
  - 12
    - SD & MMC memory for Intel PXA27x Hi, I have added the "SD Memory" and "SD Host Controller" shipped from MS. I found that when I insert a SD card. The command 5 and 1 always time-out. But the card still can be detected by OS. Is it a normal behaviour? And when I insert a MMC card. There is nth happen, no debug message in PB. And I found a thread in other forum had mentioned this problem. Do you guys know any solution for this issue? Thanks! Bryan Tag: security policies - unsigned dll Tag: 74817
  - 13
    - Cannot create a file when that file already exists I just built a dummy Win32 Smart Device application from the Visual Studio 2005 wizard and upon deploying the application to the real Pocket PC device connected with ActiveSync 4.0, I got the following error message in the output console: "Cannot create a file when that file already exists". I had this error even the first time I deployed the application; thus it is not a problem because of a file I am trying to deploy that already exists. I did the same test on the Pocket PC 2003 emulator and everything works fine. Do you know to which file the error message is referring to? Moreover, I found out that the problem is not really related to my recently created project. By just trying to connect to my device using "Tools -> Connect To Device", I had the same error message. Tag: security policies - unsigned dll Tag: 74815
  - 14
    - Audio Driver for TSC2100 problem Hi developed a wav audio driver for TSC210 under CE 5.0 using the MDD / PDD model on an i.MX21 platform. The driver is working OK h/w wise...I can set it in a loop sending digital data via SSI to my CODEC and audio appears at the speakers! When I test the audio from a test app using PlaySound, I get the following trace (see below). Essentially there is a WaveOpen, WaveStart (only 1) and then a WaveStop!!...The MDD layer reports that there is no further data! Yet the data I am sending is 250k (from PlaySound). The sample APP, BTW works as in another platform (also i.MX21). in that scenario the trace shows WaveOpen, WaveStart , WaveContinue, WaveContinue, etc until the data is exhausted! What could I possible be doing wrong in the driver to cause the MDD layer to tell me there is no data from the application? The MDD layer I note, calls a function PDD_AudioGetInterruptType in my driver and I do return AUDIO_STATE_OUT_PLAYING! Thanks in advance!! >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0x8bf42538: [FUNC] +WAV_IOControl() 0x8bf42538: PARAM : pdwOpenData = 0x51F00 0x8bf42538: PARAM : dwCode = 0x1D000C 0x8bf42538: PARAM : pBufIn = 0xE09F008 0x8bf42538: PARAM : dwLenIn = 0x14 0x8bf42538: PARAM : pBufOut = 0xE09F000 0x8bf42538: PARAM : dwLenOut = 0x4 0x8bf42538: PARAM : pdwActualOut = 0xE09F020 0x8bf42538: WODM_OPEN 0x8bf42538: [FUNC] +wdev_COMMON_OPEN() 0x8bf42538: [FUNC] +PDD_WaveProc() >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0x8bf42538: [FUNC] +PDD_WaveOpen() 0x8bf42538: FormatTag=1 Channels=2 SamplesPerSec=44100 BitsPerSample=16 0x8bf42538: TSC2100: Playing @ Stereo16 44100Hz, 0x8bf42538: [FUNC] -PDD_WaveOpen() 0x8bf42538: [FUNC] -PDD_WaveProc() 0x8bf42538: [FUNC] -wdev_COMMON_OPEN() 0x8bf42538: [FUNC] +WAV_IOControl() 0x8bf42538: PARAM : pdwOpenData = 0x51F00 0x8bf42538: PARAM : dwCode = 0x1D000C 0x8bf42538: PARAM : pBufIn = 0xE09EFDC 0x8bf42538: PARAM : dwLenIn = 0x14 0x8bf42538: PARAM : pBufOut = 0xE09EFD4 0x8bf42538: PARAM : dwLenOut = 0x4 0x8bf42538: PARAM : pdwActualOut = 0xE09EFF4 0x8bf42538: WODM_PREPARE 0x8bf42538: [FUNC] +wdev_COMMON_PREPARE() 0x8bf42538: [FUNC] -wdev_COMMON_PREPARE() 0x8bf42538: [FUNC] +WAV_IOControl() 0x8bf42538: PARAM : pdwOpenData = 0x51F00 0x8bf42538: PARAM : dwCode = 0x1D000C 0x8bf42538: PARAM : pBufIn = 0xE09EFDC 0x8bf42538: PARAM : dwLenIn = 0x14 0x8bf42538: PARAM : pBufOut = 0xE09EFD4 0x8bf42538: PARAM : dwLenOut = 0x4 0x8bf42538: PARAM : pdwActualOut = 0xE09EFF4 0x8bf42538: WODM_PREPARE 0x8bf42538: [FUNC] +wdev_COMMON_PREPARE() 0x8bf42538: [FUNC] -wdev_COMMON_PREPARE() 0x8bf42538: [FUNC] +WAV_IOControl() 0x8bf42538: PARAM : pdwOpenData = 0x51F00 0x8bf42538: PARAM : dwCode = 0x1D000C 0x8bf42538: PARAM : pBufIn = 0xE09EFDC 0x8bf42538: PARAM : dwLenIn = 0x14 0x8bf42538: PARAM : pBufOut = 0xE09EFD4 0x8bf42538: PARAM : dwLenOut = 0x4 0x8bf42538: PARAM : pdwActualOut = 0xE09EFF4 0x8bf42538: WODM_PREPARE 0x8bf42538: [FUNC] +wdev_COMMON_PREPARE() 0x8bf42538: [FUNC] -wdev_COMMON_PREPARE() 0x8bf42538: [FUNC] +WAV_IOControl() 0x8bf42538: PARAM : pdwOpenData = 0x51F00 0x8bf42538: PARAM : dwCode = 0x1D000C 0x8bf42538: PARAM : pBufIn = 0xE09EFDC 0x8bf42538: PARAM : dwLenIn = 0x14 0x8bf42538: PARAM : pBufOut = 0xE09EFD4 0x8bf42538: PARAM : dwLenOut = 0x4 0x8bf42538: PARAM : pdwActualOut = 0xE09EFF4 0x8bf42538: WODM_PREPARE 0x8bf42538: [FUNC] +wdev_COMMON_PREPARE() 0x8bf42538: [FUNC] -wdev_COMMON_PREPARE() 0x8beda584: [FUNC] +WAV_IOControl() 0x8beda584: PARAM : pdwOpenData = 0x51F00 0x8beda584: PARAM : dwCode = 0x1D000C 0x8beda584: PARAM : pBufIn = 0x83FFD18 0x8beda584: PARAM : dwLenIn = 0x14 0x8beda584: PARAM : pBufOut = 0x83FFD10 0x8beda584: PARAM : dwLenOut = 0x4 0x8beda584: PARAM : pdwActualOut = 0x83FFD30 0x8beda584: WODM_WRITE 0x8beda584: [FUNC] +wdev_WODM_WRITE() 0x8beda584: [FUNC] +wdev_COMMON_ADDBUFFER() 0x8beda584: [FUNC] -wdev_COMMON_ADDBUFFER() 0x8beda584: [FUNC] +PDD_WaveProc() >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0x8beda584: [FUNC] +PDD_WaveStart() 0x8beda584: WAPI_OUT 0x8beda584: [FUNC] un-mute TSC2100 DAC.... () 0x8beda584: CODEC: 0x1040 DACVOL=0x0 0x8beda584: Power ON Amps... 0x8beda584: +AudioFillBuffer (000521e0, 0,003c1000, 2048) 0x8beda584: pwh=000521e0,lpNext=00000000,BytesRecorded= 0,BufferLength= 2048) 0x8beda584: WPDD: memcpy (000521e0, 0,003c1000, 2048) 0x8beda584: WPDD: memset (000521e0, 2048,003c1800, 0) 0x8beda584: -AudioFillBuffer totalBytesTransferred=2048 0x8beda584: +AudioFillBuffer (000521e0, 0,003c1800, 2048) 0x8beda584: pwh=000521e0,lpNext=00000000,BytesRecorded= 2048,BufferLength= 2048) 0x8beda584: WPDD: memset (00000000, 0,003c1800, 2048) 0x8beda584: -AudioFillBuffer totalBytesTransferred=0 0x8beda584: DMAC Class TransStart: A DMA cycle started!! 0x8beda584: DMAC class: +Lock 0x8beda584: DMAC class: +UnLock: Leaving protected section!! 0x8beda584: DMAC class: Mutex is to be unlocked, Stop your critical work!! 0x8beda584: DMAC class: -UnLock: leave protected section!! 0x8bef8ae8: [INTR] INT! 0x8bef8ae8: [FUNC] +PDD_AudioGetInterruptType:() 0x8bef8ae8: ...dmacIntrTypeTransComplete [WAPI_OUT] 0x8bef8ae8: ...g_moreData[WAPI_OUT] == TRUE 0x8bef8ae8: [INTR] Audio Playing 0x8beda584: DMAC class: Interrupts of channel 15 are enabled!! 0x8beda584: DMAC class SetRepeat: channel 15 is set as repeat forever. 0x8beda584: DMAC class SetSource: Channel 15's src addr is set as 0xc29e5800! 0x8beda584: [FUNC] -PDD_WaveStart() 0x8beda584: [FUNC] -PDD_WaveProc() 0x8bef8ae8: [INTR] Block Complete... Sending callback 0x8bef8ae8: [INTR] No more data. List is NULL. Stopping audio. 0x8bef8ae8: [FUNC] +PDD_WaveProc() >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0x8bef8ae8: [FUNC] +private_WaveStop() 0x8bef8ae8: SsiClass::Transmit+ 0x8bef8ae8: SsiClass::Transmit- 0x8bef8ae8: SsiClass::InterruptClear+ 0x8bef8ae8: SsiClass::InterruptClear- 0x8bef8ae8: DMAC class: +Lock 0x8bef8ae8: DMAC class: +UnLock: Leaving protected section!! 0x8bef8ae8: DMAC class: Mutex is to be unlocked, Stop your critical work!! 0x8bef8ae8: DMAC class: -UnLock: leave protected section!! 0x8bef8ae8: DMAC class: Interrupts of channel 15 are disabled!! 0x8bef8ae8: DMAC Class TransStop: A DMA cycle terminated!! 0x8bef8ae8: [FUNC] -private_WaveStop() 0x8bef8ae8: [FUNC] -PDD_WaveProc() 0x8bef8ae8: [INTR] No input state change. Do nothing. 0x8beda584: [FUNC] -wdev_WODM_WRITE() 0x8beda584: [FUNC] +WAV_IOControl() 0x8beda584: PARAM : pdwOpenData = 0x51F00 0x8beda584: PARAM : dwCode = 0x1D000C 0x8beda584: PARAM : pBufIn = 0x83FFD18 0x8beda584: PARAM : dwLenIn = 0x14 0x8beda584: PARAM : pBufOut = 0x83FFD10 0x8beda584: PARAM : dwLenOut = 0x4 0x8beda584: PARAM : pdwActualOut = 0x83FFD30 0x8beda584: WODM_WRITE 0x8beda584: [FUNC] +wdev_WODM_WRITE() 0x8beda584: [FUNC] +wdev_COMMON_ADDBUFFER() 0x8beda584: [FUNC] -wdev_COMMON_ADDBUFFER() 0x8beda584: [FUNC] +PDD_WaveProc() 0x8beda584: [FUNC] +PDD_WaveStart() 0x8beda584: WAPI_OUT 0x8beda584: [FUNC] un-mute TSC2100 DAC.... () 0x8beda584: CODEC: 0x1040 DACVOL=0x0 0x8beda584: Power ON Amps... 0x8beda584: +AudioFillBuffer (00052200, 0,003c1000, 2048) 0x8beda584: pwh=00052200,lpNext=00000000,BytesRecorded= 0,BufferLength= 2048) 0x8beda584: WPDD: memcpy (00052200, 0,003c1000, 2048) 0x8beda584: WPDD: memset (00052200, 2048,003c1800, 0) 0x8beda584: -AudioFillBuffer totalBytesTransferred=2048 0x8beda584: +AudioFillBuffer (00052200, 0,003c1800, 2048) 0x8beda584: pwh=00052200,lpNext=00000000,BytesRecorded= 2048,BufferLength= 2048) 0x8beda584: WPDD: memset (00000000, 0,003c1800, 2048) 0x8beda584: -AudioFillBuffer totalBytesTransferred=0 0x8beda584: DMAC Class TransStart: A DMA cycle started!! 0x8beda584: DMAC class: +Lock 0x8beda584: DMAC class: +UnLock: Leaving protected section!! 0x8beda584: DMAC class: Mutex is to be unlocked, Stop your critical work!! 0x8beda584: DMAC class: -UnLock: leave protected section!! 0x8beda584: DMAC class: Interrupts of channel 15 are enabled!! 0x8beda584: DMAC class SetRepeat: channel 15 is set as repeat forever. 0x8beda584: DMAC class SetSource: Channel 15's src addr is set as 0xc29e5800! 0x8beda584: [FUNC] -PDD_WaveStart() 0x8beda584: [FUNC] -PDD_WaveProc() 0x8beda584: [FUNC] -wdev_WODM_WRITE() 0x8beda584: [FUNC] +WAV_IOControl() 0x8beda584: PARAM : pdwOpenData = 0x51F00 0x8beda584: PARAM : dwCode = 0x1D000C 0x8beda584: PARAM : pBufIn = 0x83FFD18 0x8beda584: PARAM : dwLenIn = 0x14 0x8beda584: PARAM : pBufOut = 0x83FFD10 0x8beda584: PARAM : dwLenOut = 0x4 0x8beda584: PARAM : pdwActualOut = 0x83FFD30 0x8beda584: WODM_WRITE 0x8beda584: [FUNC] +wdev_WODM_WRITE() 0x8beda584: [FUNC] +wdev_COMMON_ADDBUFFER() 0x8beda584: [FUNC] -wdev_COMMON_ADDBUFFER() 0x8beda584: [FUNC] -wdev_WODM_WRITE() 0x8beda584: [FUNC] +WAV_IOControl() 0x8beda584: PARAM : pdwOpenData = 0x51F00 0x8beda584: PARAM : dwCode = 0x1D000C 0x8beda584: PARAM : pBufIn = 0x83FFD18 0x8beda584: PARAM : dwLenIn = 0x14 0x8beda584: PARAM : pBufOut = 0x83FFD10 0x8beda584: PARAM : dwLenOut = 0x4 0x8beda584: PARAM : pdwActualOut = 0x83FFD30 0x8beda584: WODM_WRITE 0x8beda584: [FUNC] +wdev_WODM_WRITE() 0x8beda584: [FUNC] +wdev_COMMON_ADDBUFFER() 0x8beda584: [FUNC] -wdev_COMMON_ADDBUFFER() 0x8beda584: [FUNC] -wdev_WODM_WRITE() 0x8beda584: [FUNC] +WAV_IOControl() 0x8beda584: PARAM : pdwOpenData = 0x51F00 0x8beda584: PARAM : dwCode = 0x1D000C 0x8beda584: PARAM : pBufIn = 0x83FFD18 0x8beda584: PARAM : dwLenIn = 0x14 0x8beda584: PARAM : pBufOut = 0x83FFD10 0x8beda584: PARAM : dwLenOut = 0x4 0x8beda584: PARAM : pdwActualOut = 0x83FFD30 0x8beda584: WODM_WRITE 0x8beda584: [FUNC] +wdev_WODM_WRITE() 0x8beda584: [FUNC] +wdev_COMMON_ADDBUFFER() 0x8beda584: [FUNC] -wdev_COMMON_ADDBUFFER() 0x8beda584: [FUNC] -wdev_WODM_WRITE() 0x8bf42538: YakkApp: PlaySound - RETURNED OK - 0x8bf42538: YakkApp:MainWndProc+....wMsg=0x101 0x8bf42538: YakkApp:MainMessages for 0x101 0x8bf42538: YakkApp:DoKeysMain+ 0x8bf42538: YakkApp:MainWndProc+....wMsg=0xf 0x8bf42538: YakkApp:MainMessages for 0xf 0x8bf42538: YakkApp:DoPaintMain+ 0x8bf42538: YakkApp:MainWndProc+....wMsg=0x14 YakkTstDvrs - YAK_IOControl hOpenContext - 22136 YakkTstDvrs - ~ YAK_IOControl YakkTstDvrs - YAK_IOControl hOpenContext - 22136 YakkTstDvrs - ~ YAK_IOControl YakkTstDvrs - YAK_IOControl hOpenContext - 22136 YakkTstDvrs - ~ YAK_IOControl 0x8bf42538: YakkApp:DoPaintMain- 0x8beda584: SwMixer: WaitForBuffer failed. Audio driver missed interrupt? 0x8beda584: SwMixer: WaitForBuffer failed. Audio driver missed interrupt? 0x8beda584: SwMixer: WaitForBuffer failed. Audio driver missed interrupt? 0x8beda584: SwMixer: WaitForBuffer failed. Audio driver missed interrupt? 0x8beda584: SwMixer: WaitForBuffer failed. Audio driver missed interrupt? 0x8beda584: SwMixer: WaitForBuffer failed. Audio driver missed interrupt? 0x8beda584: SwMixer: WaitForBuffer failed. Audio driver missed interrupt? Tag: security policies - unsigned dll Tag: 74813
  - 15
    - SD Card driver reg settings Hi, I am trying to configure an SD card device driver for 2 physical SD card readers. I have the following:- [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\SDMemory] "Name"="SD Memory Card" "Folder"="SD Memory" [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SDHC1_MX21] "Dll"="sdhc_mx21.dll" "Prefix"="SDH" "ControllerISTPriority"=dword:64 "CardDetectISTPriority"=dword:63 [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SDHC2_MX21] "Dll"="sdhc_mx21.dll" "Prefix"="SDH" "ControllerISTPriority"=dword:64 "CardDetectISTPriority"=dword:63 The system starts but I find only "SD Memory". shouldnt there be "SD Memory1" & "SD Memory2" ? -- Stewart Clark email: stewart@wbs.co.za mobile: +27-82-444-7631 Tag: security policies - unsigned dll Tag: 74810
  - 16
    - PXA255, same hw speed, 4.2 vs 4.1, slower performance I have a PXA255 board with CE 4.1 (the "old" board) and a different PXA255 board with CE 4.2 (the "new" board being evaluated). The processor and memory speed/clocks are the same. With the old board the OS was built by the company that designed the board. With the new board I'm almost on my own. The new board can run a simple integer math loop in the same amount of time as the the old one, but some functions are slower. 1. The first surprise was that a WaitForSingleObject(event, 0) loop in an application takes twice as long on the new board. Is this function slower in CE 4.2 vs 4.1, or is there an optimization that I can do that affects this function? I don't really need this function to be that fast but I thought it might be a sign. 2. The display driver is 50% faster on the old board using a test program drawing a zigzag with the GDI (20% faster with our real application). There's no hardware graphics acceleration on either board and they use the same driver base. Does this have something to do with 4.2 or is it likely that the old board company has discovered some additional software optimizations and added it to their display driver? Tag: security policies - unsigned dll Tag: 74808
  - 17
    - Adding a second Parallel Port Hi, Am trying to run CE on a desktop PC for an industrial application. Seems to work fine save that I cannot get CE to see the Lava PCI Parallel Port card I have installed. My application requires two Parallel ports. I am using the DOS driver provided by LAVA and it seems to load and set the address for the card just fine, but CE does not show it when I run the test kit. Is there an additional catalog item I need to add and/or is there a registry setting I need to change? Any help would be most appreciated. Charlie Tag: security policies - unsigned dll Tag: 74807
  - 18
    - ANN: Reminder: CE chat tomorrow Hello! Just a note that we'll be hosting an online chat tomorrow concerning Windows CE 5.0! Members of the development team will be on hand ready to answer your questions, so bring 'em on! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Title: Windows CE 5.0 Live Chat! September 28, 2005 9:00 - 10:00 A.M. Pacific time Additional timezones: http://www.timeanddate.com/worldclock/fixedtime.html?year=2005&month=9&day=28&hour=9&min=0&sec=0&p1=234 Do you have tough technical questions regarding Windows CE 5.0 for which you're seeking answers? Do you want to tap into the deep knowledge of the talented Microsoft Embedded Devices Group members? If so, please join us for a live Windows CE 5.0 chat and bring on the questions! Windows CE 5.0 is the operating system that is powering the next generation of 32-bit, small-footprint and mobile devices. This chat will cover the tools and technologies used to develop devices using the Windows CE 5.0 operating system. To join this chat, please log on via the main MSDN chat page at: http://msdn.microsoft.com/chats -- Thanks! Michael Fosmire MVP Lead, Windows Embedded This posting is provided AS IS with no warranties, and confers no rights. Tag: security policies - unsigned dll Tag: 74806
  - 19
    - FATFS Directory Entry Not Flushed We're currently working on improving the robustness of our CE5-based gateway device through various failure modes. We have an internal flash mounted as a FAT volume (not TFAT). This volume is configured for CACHE DISABLED and ALWAYS WRITE THROUGH. I wrote a simple app for testing file operations through power failures / reboots that just creates a file, writes a patterned data to the file, then when done reads back the contents and verifies the file. What I find is that when this app is running - blasting data out to the file - if I get a directory from a separate telnet session - the filesize of the file is listed as the size of the first chunk of data written. The filesize is not updated in realtime. However, looking at the bytes available on the volume, I can see that the file data is being written in realtime - as the bytes available are continually getting smaller. If I kill the test app, the file size is then correct - and the file bytes written up until the kill are present. If I reset or powerdown - the file size is correct upon reboot or resume. However, if I randomly hit the reset button on the device - the file size upon reboot is set to 0 bytes. If I add a call to FlushFileBuffers after every call to WriteFile - I see that the directory entry is updated in realtime. So - it seems that something about the file or the FAT is being cached - and is properly flushed by the FlushFileBuffers. Is this common / expected behavior on a FAT volume - even with the cache disabled and write through enabled? Is there a way to force the automatic behavior of FlushFileBuffers in realtime? Thanks, -Chris Tag: security policies - unsigned dll Tag: 74800
  - 20
    - downloads for Win CE 4.2 platbuilder Is the Win CE 4.2 platform builder publicly available? I could not find it on the MS site, oboy ver 5.0. Will it be available if one has a MSDN subscription? Thanks Sharad. Tag: security policies - unsigned dll Tag: 74797
  - 21
    - running netlog on Smartphone with WinCE 4.2 Our goal is to do packet capture on a Smartphone device (we have an O2 XPhone <http://www.seeo2.com/product/XphoneII/template/Product.vm> running Windows Smartphone 2003). We decided to use netlog. The source code of netlog is available within the platform builder - but the only platform builder available online is for Win CE 5.0. Our device has Wince 4.2, and we try running netlog built for Wince 5.0 on this device and it fails. Specifically the code fails during SendCommandToCxport call within netlog code which sends a load message to cxport.dll. The SendCommandToCxport call basically does 1) a RegisterDevice(L"CTE",0,L"\\Windows\\cxport.dll",0); 2) CreateFile() 3) DeviceIOControl(IOCTL_NETLOG_LOAD). And it fails in RegisterDevice.. We have the following questions: 1. Has anyone got netlog working on an Smartphone device? 2. Does there exist any netlog code for WinCE 4.2 that we can use? 3. Does anyone have any idea what is the difference between the netlog code for 4.2 vs. 5.0 that could be causing this proble. Specifically with respect to the code with cexit.dll? 4. Does anyone know if one can download WinCE 4.2 platform builder from someplace? Thanks Sharad. Tag: security policies - unsigned dll Tag: 74796
  - 22
    - image file from nb0 Hi all, How can be convert nk.nb0 image file to xxx.img format, is there any dump tool for this job. thanks, Tag: security policies - unsigned dll Tag: 74793
  - 23
    - Where is the source file for... I want to break in the entry function when a execute the shortcut done after creating a new dialup connection icone. In which source file do I find it? Thanks, Tag: security policies - unsigned dll Tag: 74788
  - 24
    - Support of serial IOCTL for the CDC commands Hi I have written a communication device class driver for a modem, but RIL application call this trough only serial Ioctls, So I have written serial IOCTLs over that CDC commands, like IOCTL_SERIAL_SET_DCB->SET_LINE_CODING. But like this we can't support all serial IOCTLS trough CDC commands. How to achieve for remaining IOCTLS? For ex: IOCTL_SERIAL_WAIT_ON_MASK for this how the mask data will be updated. Is it trough notification, if Yes which of the CDC_ACM notification will update this. And how to achieve IOCTL_SERIAL_GET_MODEMSTATUS, how device will intimate the status to host, Where modem is device and host is ARM based SOC (WinCE/Magneto) Your suggestions will be appreciated. Thanks, Rashmi T S Tag: security policies - unsigned dll Tag: 74787
  - 25
    - Bluetooth USB driver fails to open pipe Hi, I am having certain issues with usb stack with respect to bluetooth usb dongle. Let me describe my platform PXA 255 Processor ISP1160 USB Host Controller from Philips Windows 4.2 BSP The drivers for host controller and usb stack has been provided by viper(ohci2.dll, usbd.dll, usbhid.dll) . Apparently the MS bluetooth usb driver doesnt work with the drivers provided by viper. The same Bluetooth USB dongle works fine with other BSPs , But when i tried with Viper BSP It gave me some hardware failed error and failed to OPen connection. The debug message which i got was "Unable to open Pipe 0" I am able to connect the keyboard and mouse to the system and it works fine. Did anyone experience this sort of problem before.. Can anyone point or hint as to what might be the solution. Thanks Vijay Tag: security policies - unsigned dll Tag: 74784

hi

I'm developing smartphone in magneto version.

My question is how to set security policies to allow to run

unsigned dll.

-When Windows media player calls unsigned dll file.

-Alert
Cannot play the file. The file is either corrupted or the player does
not supprot the format you are trying to play

Thanks for reading.

Top

Re: security policies - unsigned dll by Steve

Steve
Sun Oct 02 20:03:59 CDT 2005

That can only be changed by the carrier/device manufacturer.

--
Steve Maillet
EmbeddedFusion
www.EmbeddedFusion.com
smaillet at EmbeddedFusion dot com

Top